linux_dsm_epyc7002/net/mac80211/ieee80211_key.h

128 lines
3.1 KiB
C
Raw Normal View History

/*
* Copyright 2002-2004, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef IEEE80211_KEY_H
#define IEEE80211_KEY_H
#include <linux/types.h>
#include <linux/list.h>
#include <linux/crypto.h>
#include <net/mac80211.h>
/* ALG_TKIP
* struct ieee80211_key::key is encoded as a 256-bit (32 byte) data block:
* Temporal Encryption Key (128 bits)
* Temporal Authenticator Tx MIC Key (64 bits)
* Temporal Authenticator Rx MIC Key (64 bits)
*/
#define WEP_IV_LEN 4
#define WEP_ICV_LEN 4
#define ALG_TKIP_KEY_LEN 32
/* Starting offsets for each key */
#define ALG_TKIP_TEMP_ENCR_KEY 0
#define ALG_TKIP_TEMP_AUTH_TX_MIC_KEY 16
#define ALG_TKIP_TEMP_AUTH_RX_MIC_KEY 24
#define TKIP_IV_LEN 8
#define TKIP_ICV_LEN 4
#define ALG_CCMP_KEY_LEN 16
#define CCMP_HDR_LEN 8
#define CCMP_MIC_LEN 8
#define CCMP_TK_LEN 16
#define CCMP_PN_LEN 6
#define NUM_RX_DATA_QUEUES 17
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 04:01:55 +07:00
struct ieee80211_local;
struct ieee80211_sub_if_data;
struct sta_info;
#define KEY_FLAG_UPLOADED_TO_HARDWARE (1<<0)
struct ieee80211_key {
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 04:01:55 +07:00
struct ieee80211_local *local;
struct ieee80211_sub_if_data *sdata;
struct sta_info *sta;
struct list_head list;
unsigned int flags;
union {
struct {
/* last used TSC */
u32 iv32;
u16 iv16;
u16 p1k[5];
int tx_initialized;
/* last received RSC */
u32 iv32_rx[NUM_RX_DATA_QUEUES];
u16 iv16_rx[NUM_RX_DATA_QUEUES];
u16 p1k_rx[NUM_RX_DATA_QUEUES][5];
int rx_initialized[NUM_RX_DATA_QUEUES];
} tkip;
struct {
u8 tx_pn[6];
u8 rx_pn[NUM_RX_DATA_QUEUES][6];
struct crypto_cipher *tfm;
u32 replays; /* dot11RSNAStatsCCMPReplays */
/* scratch buffers for virt_to_page() (crypto API) */
#ifndef AES_BLOCK_LEN
#define AES_BLOCK_LEN 16
#endif
u8 tx_crypto_buf[6 * AES_BLOCK_LEN];
u8 rx_crypto_buf[6 * AES_BLOCK_LEN];
} ccmp;
} u;
/* number of times this key has been used */
int tx_rx_count;
#ifdef CONFIG_MAC80211_DEBUGFS
struct {
struct dentry *stalink;
struct dentry *dir;
struct dentry *keylen;
struct dentry *flags;
struct dentry *keyidx;
struct dentry *hw_key_idx;
struct dentry *tx_rx_count;
struct dentry *algorithm;
struct dentry *tx_spec;
struct dentry *rx_spec;
struct dentry *replays;
struct dentry *key;
struct dentry *ifindex;
} debugfs;
#endif
/*
* key config, must be last because it contains key
* material as variable length member
*/
struct ieee80211_key_conf conf;
};
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 04:01:55 +07:00
struct ieee80211_key *ieee80211_key_alloc(struct ieee80211_sub_if_data *sdata,
struct sta_info *sta,
enum ieee80211_key_alg alg,
[MAC80211]: rework key handling This moves all the key handling code out from ieee80211_ioctl.c into key.c and also does the following changes including documentation updates in mac80211.h: 1) Turn off hardware acceleration for keys when the interface is down. This is necessary because otherwise monitor interfaces could be decrypting frames for other interfaces that are down at the moment. Also, it should go some way towards better suspend/resume support, in any case the routines used here could be used for that as well. Additionally, this makes the driver interface nicer, keys for a specific local MAC address are only ever present while an interface with that MAC address is enabled. 2) Change driver set_key() callback interface to allow only return values of -ENOSPC, -EOPNOTSUPP and 0, warn on all other return values. This allows debugging the stack when a driver notices it's handed a key while it is down. 3) Invert the flag meaning to KEY_FLAG_UPLOADED_TO_HARDWARE. 4) Remove REMOVE_ALL_KEYS command as it isn't used nor do we want to use it, we'll use DISABLE_KEY for each key. It is hard to use REMOVE_ALL_KEYS because we can handle multiple virtual interfaces with different key configuration, so we'd have to keep track of a lot of state for this and that isn't worth it. 5) Warn when disabling a key fails, it musn't. 6) Remove IEEE80211_HW_NO_TKIP_WMM_HWACCEL in favour of per-key IEEE80211_KEY_FLAG_WMM_STA to let driver sort it out itself. 7) Tell driver that a (non-WEP) key is used only for transmission by using an all-zeroes station MAC address when configuring. 8) Change the set_key() callback to have access to the local MAC address the key is being added for. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-08-29 04:01:55 +07:00
int idx,
size_t key_len,
const u8 *key_data);
void ieee80211_key_free(struct ieee80211_key *key);
void ieee80211_set_default_key(struct ieee80211_sub_if_data *sdata, int idx);
void ieee80211_free_keys(struct ieee80211_sub_if_data *sdata);
void ieee80211_enable_keys(struct ieee80211_sub_if_data *sdata);
void ieee80211_disable_keys(struct ieee80211_sub_if_data *sdata);
#endif /* IEEE80211_KEY_H */