linux_dsm_epyc7002/drivers/net/wireless/ath/ath9k/btcoex.c

228 lines
6.6 KiB
C
Raw Normal View History

/*
* Copyright (c) 2009 Atheros Communications Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include "hw.h"
enum ath_bt_mode {
ATH_BT_COEX_MODE_LEGACY, /* legacy rx_clear mode */
ATH_BT_COEX_MODE_UNSLOTTED, /* untimed/unslotted mode */
ATH_BT_COEX_MODE_SLOTTED, /* slotted mode */
ATH_BT_COEX_MODE_DISALBED, /* coexistence disabled */
};
struct ath_btcoex_config {
u8 bt_time_extend;
bool bt_txstate_extend;
bool bt_txframe_extend;
enum ath_bt_mode bt_mode; /* coexistence mode */
bool bt_quiet_collision;
bool bt_rxclear_polarity; /* invert rx_clear as WLAN_ACTIVE*/
u8 bt_priority_time;
u8 bt_first_slot_time;
bool bt_hold_rx_clear;
};
static const u16 ath_subsysid_tbl[] = {
AR9280_COEX2WIRE_SUBSYSID,
AT9285_COEX3WIRE_SA_SUBSYSID,
AT9285_COEX3WIRE_DA_SUBSYSID
};
/*
* Checks the subsystem id of the device to see if it
* supports btcoex
*/
bool ath9k_hw_btcoex_supported(struct ath_hw *ah)
{
int i;
if (!ah->hw_version.subsysid)
return false;
for (i = 0; i < ARRAY_SIZE(ath_subsysid_tbl); i++)
if (ah->hw_version.subsysid == ath_subsysid_tbl[i])
return true;
return false;
}
void ath9k_hw_init_btcoex_hw(struct ath_hw *ah, int qnum)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
const struct ath_btcoex_config ath_bt_config = {
.bt_time_extend = 0,
.bt_txstate_extend = true,
.bt_txframe_extend = true,
.bt_mode = ATH_BT_COEX_MODE_SLOTTED,
.bt_quiet_collision = true,
.bt_rxclear_polarity = true,
.bt_priority_time = 2,
.bt_first_slot_time = 5,
.bt_hold_rx_clear = true,
};
u32 i;
btcoex_hw->bt_coex_mode =
(btcoex_hw->bt_coex_mode & AR_BT_QCU_THRESH) |
SM(ath_bt_config.bt_time_extend, AR_BT_TIME_EXTEND) |
SM(ath_bt_config.bt_txstate_extend, AR_BT_TXSTATE_EXTEND) |
SM(ath_bt_config.bt_txframe_extend, AR_BT_TX_FRAME_EXTEND) |
SM(ath_bt_config.bt_mode, AR_BT_MODE) |
SM(ath_bt_config.bt_quiet_collision, AR_BT_QUIET) |
SM(ath_bt_config.bt_rxclear_polarity, AR_BT_RX_CLEAR_POLARITY) |
SM(ath_bt_config.bt_priority_time, AR_BT_PRIORITY_TIME) |
SM(ath_bt_config.bt_first_slot_time, AR_BT_FIRST_SLOT_TIME) |
SM(qnum, AR_BT_QCU_THRESH);
btcoex_hw->bt_coex_mode2 =
SM(ath_bt_config.bt_hold_rx_clear, AR_BT_HOLD_RX_CLEAR) |
SM(ATH_BTCOEX_BMISS_THRESH, AR_BT_BCN_MISS_THRESH) |
AR_BT_DISABLE_BT_ANT;
for (i = 0; i < 32; i++)
ah->hw_gen_timers.gen_timer_index[(debruijn32 << i) >> 27] = i;
}
EXPORT_SYMBOL(ath9k_hw_init_btcoex_hw);
void ath9k_hw_btcoex_init_2wire(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
/* connect bt_active to baseband */
REG_CLR_BIT(ah, AR_GPIO_INPUT_EN_VAL,
(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_DEF |
AR_GPIO_INPUT_EN_VAL_BT_FREQUENCY_DEF));
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB);
/* Set input mux for bt_active to gpio pin */
REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
AR_GPIO_INPUT_MUX1_BT_ACTIVE,
btcoex_hw->btactive_gpio);
/* Configure the desired gpio port for input */
ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btactive_gpio);
}
EXPORT_SYMBOL(ath9k_hw_btcoex_init_2wire);
void ath9k_hw_btcoex_init_3wire(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
/* btcoex 3-wire */
REG_SET_BIT(ah, AR_GPIO_INPUT_EN_VAL,
(AR_GPIO_INPUT_EN_VAL_BT_PRIORITY_BB |
AR_GPIO_INPUT_EN_VAL_BT_ACTIVE_BB));
/* Set input mux for bt_prority_async and
* bt_active_async to GPIO pins */
REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
AR_GPIO_INPUT_MUX1_BT_ACTIVE,
btcoex_hw->btactive_gpio);
REG_RMW_FIELD(ah, AR_GPIO_INPUT_MUX1,
AR_GPIO_INPUT_MUX1_BT_PRIORITY,
btcoex_hw->btpriority_gpio);
/* Configure the desired GPIO ports for input */
ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btactive_gpio);
ath9k_hw_cfg_gpio_input(ah, btcoex_hw->btpriority_gpio);
}
EXPORT_SYMBOL(ath9k_hw_btcoex_init_3wire);
static void ath9k_hw_btcoex_enable_2wire(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
/* Configure the desired GPIO port for TX_FRAME output */
ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
AR_GPIO_OUTPUT_MUX_AS_TX_FRAME);
}
void ath9k_hw_btcoex_set_weight(struct ath_hw *ah,
u32 bt_weight,
u32 wlan_weight)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
btcoex_hw->bt_coex_weights = SM(bt_weight, AR_BTCOEX_BT_WGHT) |
SM(wlan_weight, AR_BTCOEX_WL_WGHT);
}
EXPORT_SYMBOL(ath9k_hw_btcoex_set_weight);
static void ath9k_hw_btcoex_enable_3wire(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
/*
* Program coex mode and weight registers to
* enable coex 3-wire
*/
REG_WRITE(ah, AR_BT_COEX_MODE, btcoex_hw->bt_coex_mode);
REG_WRITE(ah, AR_BT_COEX_WEIGHT, btcoex_hw->bt_coex_weights);
REG_WRITE(ah, AR_BT_COEX_MODE2, btcoex_hw->bt_coex_mode2);
REG_RMW_FIELD(ah, AR_QUIET1, AR_QUIET1_QUIET_ACK_CTS_ENABLE, 1);
REG_RMW_FIELD(ah, AR_PCU_MISC, AR_PCU_BT_ANT_PREVENT_RX, 0);
ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
AR_GPIO_OUTPUT_MUX_AS_RX_CLEAR_EXTERNAL);
}
void ath9k_hw_btcoex_enable(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
switch (btcoex_hw->scheme) {
case ATH_BTCOEX_CFG_NONE:
break;
case ATH_BTCOEX_CFG_2WIRE:
ath9k_hw_btcoex_enable_2wire(ah);
break;
case ATH_BTCOEX_CFG_3WIRE:
ath9k_hw_btcoex_enable_3wire(ah);
break;
}
REG_RMW(ah, AR_GPIO_PDPU,
(0x2 << (btcoex_hw->btactive_gpio * 2)),
(0x3 << (btcoex_hw->btactive_gpio * 2)));
ah->btcoex_hw.enabled = true;
}
EXPORT_SYMBOL(ath9k_hw_btcoex_enable);
void ath9k_hw_btcoex_disable(struct ath_hw *ah)
{
struct ath_btcoex_hw *btcoex_hw = &ah->btcoex_hw;
ath9k_hw_set_gpio(ah, btcoex_hw->wlanactive_gpio, 0);
ath9k_hw_cfg_output(ah, btcoex_hw->wlanactive_gpio,
AR_GPIO_OUTPUT_MUX_AS_OUTPUT);
if (btcoex_hw->scheme == ATH_BTCOEX_CFG_3WIRE) {
REG_WRITE(ah, AR_BT_COEX_MODE, AR_BT_QUIET | AR_BT_MODE);
REG_WRITE(ah, AR_BT_COEX_WEIGHT, 0);
REG_WRITE(ah, AR_BT_COEX_MODE2, 0);
}
ah->btcoex_hw.enabled = false;
}
EXPORT_SYMBOL(ath9k_hw_btcoex_disable);