linux_dsm_epyc7002/drivers/char/tpm/tpm_crb.c

696 lines
17 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2014 Intel Corporation
*
* Authors:
* Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
*
* Maintained by: <tpmdd-devel@lists.sourceforge.net>
*
* This device driver implements the TPM interface as defined in
* the TCG CRB 2.0 TPM specification.
*/
#include <linux/acpi.h>
#include <linux/highmem.h>
#include <linux/rculist.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#ifdef CONFIG_ARM64
#include <linux/arm-smccc.h>
#endif
#include "tpm.h"
#define ACPI_SIG_TPM2 "TPM2"
static const guid_t crb_acpi_start_guid =
GUID_INIT(0x6BBF6CAB, 0x5463, 0x4714,
0xB7, 0xCD, 0xF0, 0x20, 0x3C, 0x03, 0x68, 0xD4);
enum crb_defaults {
CRB_ACPI_START_REVISION_ID = 1,
CRB_ACPI_START_INDEX = 1,
};
enum crb_loc_ctrl {
CRB_LOC_CTRL_REQUEST_ACCESS = BIT(0),
CRB_LOC_CTRL_RELINQUISH = BIT(1),
};
enum crb_loc_state {
CRB_LOC_STATE_LOC_ASSIGNED = BIT(1),
CRB_LOC_STATE_TPM_REG_VALID_STS = BIT(7),
};
enum crb_ctrl_req {
CRB_CTRL_REQ_CMD_READY = BIT(0),
CRB_CTRL_REQ_GO_IDLE = BIT(1),
};
enum crb_ctrl_sts {
CRB_CTRL_STS_ERROR = BIT(0),
CRB_CTRL_STS_TPM_IDLE = BIT(1),
};
enum crb_start {
CRB_START_INVOKE = BIT(0),
};
enum crb_cancel {
CRB_CANCEL_INVOKE = BIT(0),
};
struct crb_regs_head {
u32 loc_state;
u32 reserved1;
u32 loc_ctrl;
u32 loc_sts;
u8 reserved2[32];
u64 intf_id;
u64 ctrl_ext;
} __packed;
struct crb_regs_tail {
u32 ctrl_req;
u32 ctrl_sts;
u32 ctrl_cancel;
u32 ctrl_start;
u32 ctrl_int_enable;
u32 ctrl_int_sts;
u32 ctrl_cmd_size;
u32 ctrl_cmd_pa_low;
u32 ctrl_cmd_pa_high;
u32 ctrl_rsp_size;
u64 ctrl_rsp_pa;
} __packed;
enum crb_status {
CRB_DRV_STS_COMPLETE = BIT(0),
};
struct crb_priv {
u32 sm;
const char *hid;
void __iomem *iobase;
struct crb_regs_head __iomem *regs_h;
struct crb_regs_tail __iomem *regs_t;
u8 __iomem *cmd;
u8 __iomem *rsp;
u32 cmd_size;
u32 smc_func_id;
};
struct tpm2_crb_smc {
u32 interrupt;
u8 interrupt_flags;
u8 op_flags;
u16 reserved2;
u32 smc_func_id;
};
static bool crb_wait_for_reg_32(u32 __iomem *reg, u32 mask, u32 value,
unsigned long timeout)
{
ktime_t start;
ktime_t stop;
start = ktime_get();
stop = ktime_add(start, ms_to_ktime(timeout));
do {
if ((ioread32(reg) & mask) == value)
return true;
usleep_range(50, 100);
} while (ktime_before(ktime_get(), stop));
return ((ioread32(reg) & mask) == value);
}
/**
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
* __crb_go_idle - request tpm crb device to go the idle state
*
* @dev: crb device
* @priv: crb private data
*
* Write CRB_CTRL_REQ_GO_IDLE to TPM_CRB_CTRL_REQ
* The device should respond within TIMEOUT_C by clearing the bit.
* Anyhow, we do not wait here as a consequent CMD_READY request
* will be handled correctly even if idle was not completed.
*
* The function does nothing for devices with ACPI-start method
* or SMC-start method.
*
* Return: 0 always
*/
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
static int __crb_go_idle(struct device *dev, struct crb_priv *priv)
{
if ((priv->sm == ACPI_TPM2_START_METHOD) ||
(priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) ||
(priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC))
return 0;
iowrite32(CRB_CTRL_REQ_GO_IDLE, &priv->regs_t->ctrl_req);
if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req,
CRB_CTRL_REQ_GO_IDLE/* mask */,
0, /* value */
TPM2_TIMEOUT_C)) {
dev_warn(dev, "goIdle timed out\n");
return -ETIME;
}
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
return 0;
}
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
static int crb_go_idle(struct tpm_chip *chip)
{
struct device *dev = &chip->dev;
struct crb_priv *priv = dev_get_drvdata(dev);
return __crb_go_idle(dev, priv);
}
/**
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
* __crb_cmd_ready - request tpm crb device to enter ready state
*
* @dev: crb device
* @priv: crb private data
*
* Write CRB_CTRL_REQ_CMD_READY to TPM_CRB_CTRL_REQ
* and poll till the device acknowledge it by clearing the bit.
* The device should respond within TIMEOUT_C.
*
* The function does nothing for devices with ACPI-start method
* or SMC-start method.
*
* Return: 0 on success -ETIME on timeout;
*/
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
static int __crb_cmd_ready(struct device *dev, struct crb_priv *priv)
{
if ((priv->sm == ACPI_TPM2_START_METHOD) ||
(priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD) ||
(priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC))
return 0;
iowrite32(CRB_CTRL_REQ_CMD_READY, &priv->regs_t->ctrl_req);
if (!crb_wait_for_reg_32(&priv->regs_t->ctrl_req,
CRB_CTRL_REQ_CMD_READY /* mask */,
0, /* value */
TPM2_TIMEOUT_C)) {
dev_warn(dev, "cmdReady timed out\n");
return -ETIME;
}
return 0;
}
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
static int crb_cmd_ready(struct tpm_chip *chip)
{
struct device *dev = &chip->dev;
struct crb_priv *priv = dev_get_drvdata(dev);
return __crb_cmd_ready(dev, priv);
}
static int __crb_request_locality(struct device *dev,
struct crb_priv *priv, int loc)
{
u32 value = CRB_LOC_STATE_LOC_ASSIGNED |
CRB_LOC_STATE_TPM_REG_VALID_STS;
if (!priv->regs_h)
return 0;
iowrite32(CRB_LOC_CTRL_REQUEST_ACCESS, &priv->regs_h->loc_ctrl);
if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, value, value,
TPM2_TIMEOUT_C)) {
dev_warn(dev, "TPM_LOC_STATE_x.requestAccess timed out\n");
return -ETIME;
}
return 0;
}
static int crb_request_locality(struct tpm_chip *chip, int loc)
{
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
return __crb_request_locality(&chip->dev, priv, loc);
}
static int __crb_relinquish_locality(struct device *dev,
struct crb_priv *priv, int loc)
{
u32 mask = CRB_LOC_STATE_LOC_ASSIGNED |
CRB_LOC_STATE_TPM_REG_VALID_STS;
u32 value = CRB_LOC_STATE_TPM_REG_VALID_STS;
if (!priv->regs_h)
return 0;
iowrite32(CRB_LOC_CTRL_RELINQUISH, &priv->regs_h->loc_ctrl);
if (!crb_wait_for_reg_32(&priv->regs_h->loc_state, mask, value,
TPM2_TIMEOUT_C)) {
dev_warn(dev, "TPM_LOC_STATE_x.requestAccess timed out\n");
return -ETIME;
}
return 0;
}
static int crb_relinquish_locality(struct tpm_chip *chip, int loc)
{
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
return __crb_relinquish_locality(&chip->dev, priv, loc);
}
static u8 crb_status(struct tpm_chip *chip)
{
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
u8 sts = 0;
if ((ioread32(&priv->regs_t->ctrl_start) & CRB_START_INVOKE) !=
CRB_START_INVOKE)
sts |= CRB_DRV_STS_COMPLETE;
return sts;
}
static int crb_recv(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
unsigned int expected;
/* A sanity check that the upper layer wants to get at least the header
* as that is the minimum size for any TPM response.
*/
if (count < TPM_HEADER_SIZE)
return -EIO;
/* If this bit is set, according to the spec, the TPM is in
* unrecoverable condition.
*/
if (ioread32(&priv->regs_t->ctrl_sts) & CRB_CTRL_STS_ERROR)
return -EIO;
/* Read the first 8 bytes in order to get the length of the response.
* We read exactly a quad word in order to make sure that the remaining
* reads will be aligned.
*/
memcpy_fromio(buf, priv->rsp, 8);
expected = be32_to_cpup((__be32 *)&buf[2]);
if (expected > count || expected < TPM_HEADER_SIZE)
return -EIO;
memcpy_fromio(&buf[8], &priv->rsp[8], expected - 8);
return expected;
}
static int crb_do_acpi_start(struct tpm_chip *chip)
{
union acpi_object *obj;
int rc;
obj = acpi_evaluate_dsm(chip->acpi_dev_handle,
&crb_acpi_start_guid,
CRB_ACPI_START_REVISION_ID,
CRB_ACPI_START_INDEX,
NULL);
if (!obj)
return -ENXIO;
rc = obj->integer.value == 0 ? 0 : -ENXIO;
ACPI_FREE(obj);
return rc;
}
#ifdef CONFIG_ARM64
/*
* This is a TPM Command Response Buffer start method that invokes a
* Secure Monitor Call to requrest the firmware to execute or cancel
* a TPM 2.0 command.
*/
static int tpm_crb_smc_start(struct device *dev, unsigned long func_id)
{
struct arm_smccc_res res;
arm_smccc_smc(func_id, 0, 0, 0, 0, 0, 0, 0, &res);
if (res.a0 != 0) {
dev_err(dev,
FW_BUG "tpm_crb_smc_start() returns res.a0 = 0x%lx\n",
res.a0);
return -EIO;
}
return 0;
}
#else
static int tpm_crb_smc_start(struct device *dev, unsigned long func_id)
{
dev_err(dev, FW_BUG "tpm_crb: incorrect start method\n");
return -EINVAL;
}
#endif
static int crb_send(struct tpm_chip *chip, u8 *buf, size_t len)
{
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
int rc = 0;
/* Zero the cancel register so that the next command will not get
* canceled.
*/
iowrite32(0, &priv->regs_t->ctrl_cancel);
if (len > priv->cmd_size) {
dev_err(&chip->dev, "invalid command count value %zd %d\n",
len, priv->cmd_size);
return -E2BIG;
}
memcpy_toio(priv->cmd, buf, len);
/* Make sure that cmd is populated before issuing start. */
wmb();
/* The reason for the extra quirk is that the PTT in 4th Gen Core CPUs
* report only ACPI start but in practice seems to require both
* CRB start, hence invoking CRB start method if hid == MSFT0101.
*/
if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) ||
(priv->sm == ACPI_TPM2_MEMORY_MAPPED) ||
(!strcmp(priv->hid, "MSFT0101")))
iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
if ((priv->sm == ACPI_TPM2_START_METHOD) ||
(priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD))
rc = crb_do_acpi_start(chip);
if (priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
iowrite32(CRB_START_INVOKE, &priv->regs_t->ctrl_start);
rc = tpm_crb_smc_start(&chip->dev, priv->smc_func_id);
}
return rc;
}
static void crb_cancel(struct tpm_chip *chip)
{
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
iowrite32(CRB_CANCEL_INVOKE, &priv->regs_t->ctrl_cancel);
if (((priv->sm == ACPI_TPM2_START_METHOD) ||
(priv->sm == ACPI_TPM2_COMMAND_BUFFER_WITH_START_METHOD)) &&
crb_do_acpi_start(chip))
dev_err(&chip->dev, "ACPI Start failed\n");
}
static bool crb_req_canceled(struct tpm_chip *chip, u8 status)
{
struct crb_priv *priv = dev_get_drvdata(&chip->dev);
u32 cancel = ioread32(&priv->regs_t->ctrl_cancel);
return (cancel & CRB_CANCEL_INVOKE) == CRB_CANCEL_INVOKE;
}
static const struct tpm_class_ops tpm_crb = {
.flags = TPM_OPS_AUTO_STARTUP,
.status = crb_status,
.recv = crb_recv,
.send = crb_send,
.cancel = crb_cancel,
.req_canceled = crb_req_canceled,
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
.go_idle = crb_go_idle,
.cmd_ready = crb_cmd_ready,
.request_locality = crb_request_locality,
.relinquish_locality = crb_relinquish_locality,
.req_complete_mask = CRB_DRV_STS_COMPLETE,
.req_complete_val = CRB_DRV_STS_COMPLETE,
};
static int crb_check_resource(struct acpi_resource *ares, void *data)
{
struct resource *io_res = data;
struct resource_win win;
struct resource *res = &(win.res);
if (acpi_dev_resource_memory(ares, res) ||
acpi_dev_resource_address_space(ares, &win)) {
*io_res = *res;
io_res->name = NULL;
}
return 1;
}
static void __iomem *crb_map_res(struct device *dev, struct crb_priv *priv,
struct resource *io_res, u64 start, u32 size)
{
struct resource new_res = {
.start = start,
.end = start + size - 1,
.flags = IORESOURCE_MEM,
};
/* Detect a 64 bit address on a 32 bit system */
if (start != new_res.start)
return (void __iomem *) ERR_PTR(-EINVAL);
if (!resource_contains(io_res, &new_res))
return devm_ioremap_resource(dev, &new_res);
return priv->iobase + (new_res.start - io_res->start);
}
/*
* Work around broken BIOSs that return inconsistent values from the ACPI
* region vs the registers. Trust the ACPI region. Such broken systems
* probably cannot send large TPM commands since the buffer will be truncated.
*/
static u64 crb_fixup_cmd_size(struct device *dev, struct resource *io_res,
u64 start, u64 size)
{
if (io_res->start > start || io_res->end < start)
return size;
if (start + size - 1 <= io_res->end)
return size;
dev_err(dev,
FW_BUG "ACPI region does not cover the entire command/response buffer. %pr vs %llx %llx\n",
io_res, start, size);
return io_res->end - start + 1;
}
static int crb_map_io(struct acpi_device *device, struct crb_priv *priv,
struct acpi_table_tpm2 *buf)
{
struct list_head resources;
struct resource io_res;
struct device *dev = &device->dev;
u32 pa_high, pa_low;
u64 cmd_pa;
u32 cmd_size;
__le64 __rsp_pa;
u64 rsp_pa;
u32 rsp_size;
int ret;
INIT_LIST_HEAD(&resources);
ret = acpi_dev_get_resources(device, &resources, crb_check_resource,
&io_res);
if (ret < 0)
return ret;
acpi_dev_free_resource_list(&resources);
if (resource_type(&io_res) != IORESOURCE_MEM) {
dev_err(dev, FW_BUG "TPM2 ACPI table does not define a memory resource\n");
return -EINVAL;
}
priv->iobase = devm_ioremap_resource(dev, &io_res);
if (IS_ERR(priv->iobase))
return PTR_ERR(priv->iobase);
/* The ACPI IO region starts at the head area and continues to include
* the control area, as one nice sane region except for some older
* stuff that puts the control area outside the ACPI IO region.
*/
if ((priv->sm == ACPI_TPM2_COMMAND_BUFFER) ||
(priv->sm == ACPI_TPM2_MEMORY_MAPPED)) {
if (buf->control_address == io_res.start +
sizeof(*priv->regs_h))
priv->regs_h = priv->iobase;
else
dev_warn(dev, FW_BUG "Bad ACPI memory layout");
}
ret = __crb_request_locality(dev, priv, 0);
if (ret)
return ret;
priv->regs_t = crb_map_res(dev, priv, &io_res, buf->control_address,
sizeof(struct crb_regs_tail));
if (IS_ERR(priv->regs_t)) {
ret = PTR_ERR(priv->regs_t);
goto out_relinquish_locality;
}
/*
* PTT HW bug w/a: wake up the device to access
* possibly not retained registers.
*/
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
ret = __crb_cmd_ready(dev, priv);
if (ret)
goto out_relinquish_locality;
pa_high = ioread32(&priv->regs_t->ctrl_cmd_pa_high);
pa_low = ioread32(&priv->regs_t->ctrl_cmd_pa_low);
cmd_pa = ((u64)pa_high << 32) | pa_low;
cmd_size = crb_fixup_cmd_size(dev, &io_res, cmd_pa,
ioread32(&priv->regs_t->ctrl_cmd_size));
dev_dbg(dev, "cmd_hi = %X cmd_low = %X cmd_size %X\n",
pa_high, pa_low, cmd_size);
priv->cmd = crb_map_res(dev, priv, &io_res, cmd_pa, cmd_size);
if (IS_ERR(priv->cmd)) {
ret = PTR_ERR(priv->cmd);
goto out;
}
memcpy_fromio(&__rsp_pa, &priv->regs_t->ctrl_rsp_pa, 8);
rsp_pa = le64_to_cpu(__rsp_pa);
rsp_size = crb_fixup_cmd_size(dev, &io_res, rsp_pa,
ioread32(&priv->regs_t->ctrl_rsp_size));
if (cmd_pa != rsp_pa) {
priv->rsp = crb_map_res(dev, priv, &io_res, rsp_pa, rsp_size);
ret = PTR_ERR_OR_ZERO(priv->rsp);
goto out;
}
/* According to the PTP specification, overlapping command and response
* buffer sizes must be identical.
*/
if (cmd_size != rsp_size) {
dev_err(dev, FW_BUG "overlapping command and response buffer sizes are not identical");
ret = -EINVAL;
goto out;
}
priv->rsp = priv->cmd;
out:
if (!ret)
priv->cmd_size = cmd_size;
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
__crb_go_idle(dev, priv);
out_relinquish_locality:
__crb_relinquish_locality(dev, priv, 0);
return ret;
}
static int crb_acpi_add(struct acpi_device *device)
{
struct acpi_table_tpm2 *buf;
struct crb_priv *priv;
struct tpm_chip *chip;
struct device *dev = &device->dev;
struct tpm2_crb_smc *crb_smc;
acpi_status status;
u32 sm;
int rc;
status = acpi_get_table(ACPI_SIG_TPM2, 1,
(struct acpi_table_header **) &buf);
if (ACPI_FAILURE(status) || buf->header.length < sizeof(*buf)) {
dev_err(dev, FW_BUG "failed to get TPM2 ACPI table\n");
return -EINVAL;
}
/* Should the FIFO driver handle this? */
sm = buf->start_method;
if (sm == ACPI_TPM2_MEMORY_MAPPED)
return -ENODEV;
priv = devm_kzalloc(dev, sizeof(struct crb_priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
if (sm == ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC) {
if (buf->header.length < (sizeof(*buf) + sizeof(*crb_smc))) {
dev_err(dev,
FW_BUG "TPM2 ACPI table has wrong size %u for start method type %d\n",
buf->header.length,
ACPI_TPM2_COMMAND_BUFFER_WITH_ARM_SMC);
return -EINVAL;
}
crb_smc = ACPI_ADD_PTR(struct tpm2_crb_smc, buf, sizeof(*buf));
priv->smc_func_id = crb_smc->smc_func_id;
}
priv->sm = sm;
priv->hid = acpi_device_hid(device);
rc = crb_map_io(device, priv, buf);
if (rc)
return rc;
chip = tpmm_chip_alloc(dev, &tpm_crb);
if (IS_ERR(chip))
return PTR_ERR(chip);
dev_set_drvdata(&chip->dev, priv);
chip->acpi_dev_handle = device->handle;
chip->flags = TPM_CHIP_FLAG_TPM2;
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
return tpm_chip_register(chip);
}
static int crb_acpi_remove(struct acpi_device *device)
{
struct device *dev = &device->dev;
struct tpm_chip *chip = dev_get_drvdata(dev);
tpm_chip_unregister(chip);
return 0;
}
static const struct dev_pm_ops crb_pm = {
tpm: separate cmd_ready/go_idle from runtime_pm Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-06-28 22:13:33 +07:00
SET_SYSTEM_SLEEP_PM_OPS(tpm_pm_suspend, tpm_pm_resume)
};
static const struct acpi_device_id crb_device_ids[] = {
{"MSFT0101", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, crb_device_ids);
static struct acpi_driver crb_acpi_driver = {
.name = "tpm_crb",
.ids = crb_device_ids,
.ops = {
.add = crb_acpi_add,
.remove = crb_acpi_remove,
},
.drv = {
.pm = &crb_pm,
},
};
module_acpi_driver(crb_acpi_driver);
MODULE_AUTHOR("Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>");
MODULE_DESCRIPTION("TPM2 Driver");
MODULE_VERSION("0.1");
MODULE_LICENSE("GPL");