linux_dsm_epyc7002/drivers/gpu/drm/omapdrm/omap_fb.c

486 lines
13 KiB
C
Raw Normal View History

staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
/*
* drivers/gpu/drm/omapdrm/omap_fb.c
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
*
* Copyright (C) 2011 Texas Instruments
* Author: Rob Clark <rob@ti.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "omap_drv.h"
#include "omap_dmm_tiler.h"
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
/*
* framebuffer funcs
*/
/* per-format info: */
struct format {
enum omap_color_mode dss_format;
uint32_t pixel_format;
struct {
int stride_bpp; /* this times width is stride */
int sub_y; /* sub-sample in y dimension */
} planes[4];
bool yuv;
};
static const struct format formats[] = {
/* 16bpp [A]RGB: */
{ OMAP_DSS_COLOR_RGB16, DRM_FORMAT_RGB565, {{2, 1}}, false }, /* RGB16-565 */
{ OMAP_DSS_COLOR_RGB12U, DRM_FORMAT_RGBX4444, {{2, 1}}, false }, /* RGB12x-4444 */
{ OMAP_DSS_COLOR_RGBX16, DRM_FORMAT_XRGB4444, {{2, 1}}, false }, /* xRGB12-4444 */
{ OMAP_DSS_COLOR_RGBA16, DRM_FORMAT_RGBA4444, {{2, 1}}, false }, /* RGBA12-4444 */
{ OMAP_DSS_COLOR_ARGB16, DRM_FORMAT_ARGB4444, {{2, 1}}, false }, /* ARGB16-4444 */
{ OMAP_DSS_COLOR_XRGB16_1555, DRM_FORMAT_XRGB1555, {{2, 1}}, false }, /* xRGB15-1555 */
{ OMAP_DSS_COLOR_ARGB16_1555, DRM_FORMAT_ARGB1555, {{2, 1}}, false }, /* ARGB16-1555 */
/* 24bpp RGB: */
{ OMAP_DSS_COLOR_RGB24P, DRM_FORMAT_RGB888, {{3, 1}}, false }, /* RGB24-888 */
/* 32bpp [A]RGB: */
{ OMAP_DSS_COLOR_RGBX32, DRM_FORMAT_RGBX8888, {{4, 1}}, false }, /* RGBx24-8888 */
{ OMAP_DSS_COLOR_RGB24U, DRM_FORMAT_XRGB8888, {{4, 1}}, false }, /* xRGB24-8888 */
{ OMAP_DSS_COLOR_RGBA32, DRM_FORMAT_RGBA8888, {{4, 1}}, false }, /* RGBA32-8888 */
{ OMAP_DSS_COLOR_ARGB32, DRM_FORMAT_ARGB8888, {{4, 1}}, false }, /* ARGB32-8888 */
/* YUV: */
{ OMAP_DSS_COLOR_NV12, DRM_FORMAT_NV12, {{1, 1}, {1, 2}}, true },
{ OMAP_DSS_COLOR_YUV2, DRM_FORMAT_YUYV, {{2, 1}}, true },
{ OMAP_DSS_COLOR_UYVY, DRM_FORMAT_UYVY, {{2, 1}}, true },
};
/* convert from overlay's pixel formats bitmask to an array of fourcc's */
uint32_t omap_framebuffer_get_formats(uint32_t *pixel_formats,
uint32_t max_formats, enum omap_color_mode supported_modes)
{
uint32_t nformats = 0;
int i = 0;
for (i = 0; i < ARRAY_SIZE(formats) && nformats < max_formats; i++)
if (formats[i].dss_format & supported_modes)
pixel_formats[nformats++] = formats[i].pixel_format;
return nformats;
}
/* per-plane info for the fb: */
struct plane {
struct drm_gem_object *bo;
uint32_t pitch;
uint32_t offset;
dma_addr_t paddr;
};
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
#define to_omap_framebuffer(x) container_of(x, struct omap_framebuffer, base)
struct omap_framebuffer {
struct drm_framebuffer base;
const struct format *format;
struct plane planes[4];
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
};
static int omap_framebuffer_create_handle(struct drm_framebuffer *fb,
struct drm_file *file_priv,
unsigned int *handle)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
return drm_gem_handle_create(file_priv,
omap_fb->planes[0].bo, handle);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
static void omap_framebuffer_destroy(struct drm_framebuffer *fb)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
int i, n = drm_format_num_planes(fb->pixel_format);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
DBG("destroy: FB ID: %d (%p)", fb->base.id, fb);
drm_framebuffer_cleanup(fb);
for (i = 0; i < n; i++) {
struct plane *plane = &omap_fb->planes[i];
if (plane->bo)
drm_gem_object_unreference_unlocked(plane->bo);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
kfree(omap_fb);
}
static int omap_framebuffer_dirty(struct drm_framebuffer *fb,
struct drm_file *file_priv, unsigned flags, unsigned color,
struct drm_clip_rect *clips, unsigned num_clips)
{
int i;
drm_modeset_lock_all(fb->dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
for (i = 0; i < num_clips; i++) {
omap_framebuffer_flush(fb, clips[i].x1, clips[i].y1,
clips[i].x2 - clips[i].x1,
clips[i].y2 - clips[i].y1);
}
drm_modeset_unlock_all(fb->dev);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return 0;
}
static const struct drm_framebuffer_funcs omap_framebuffer_funcs = {
.create_handle = omap_framebuffer_create_handle,
.destroy = omap_framebuffer_destroy,
.dirty = omap_framebuffer_dirty,
};
static uint32_t get_linear_addr(struct plane *plane,
const struct format *format, int n, int x, int y)
{
uint32_t offset;
offset = plane->offset +
(x * format->planes[n].stride_bpp) +
(y * plane->pitch / format->planes[n].sub_y);
return plane->paddr + offset;
}
/* update ovl info for scanout, handles cases of multi-planar fb's, etc.
*/
void omap_framebuffer_update_scanout(struct drm_framebuffer *fb,
struct omap_drm_window *win, struct omap_overlay_info *info)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
const struct format *format = omap_fb->format;
struct plane *plane = &omap_fb->planes[0];
uint32_t x, y, orient = 0;
info->color_mode = format->dss_format;
info->pos_x = win->crtc_x;
info->pos_y = win->crtc_y;
info->out_width = win->crtc_w;
info->out_height = win->crtc_h;
info->width = win->src_w;
info->height = win->src_h;
x = win->src_x;
y = win->src_y;
if (omap_gem_flags(plane->bo) & OMAP_BO_TILED) {
uint32_t w = win->src_w;
uint32_t h = win->src_h;
switch (win->rotation & 0xf) {
default:
dev_err(fb->dev->dev, "invalid rotation: %02x",
(uint32_t)win->rotation);
/* fallthru to default to no rotation */
case 0:
case BIT(DRM_ROTATE_0):
orient = 0;
break;
case BIT(DRM_ROTATE_90):
orient = MASK_XY_FLIP | MASK_X_INVERT;
break;
case BIT(DRM_ROTATE_180):
orient = MASK_X_INVERT | MASK_Y_INVERT;
break;
case BIT(DRM_ROTATE_270):
orient = MASK_XY_FLIP | MASK_Y_INVERT;
break;
}
if (win->rotation & BIT(DRM_REFLECT_X))
orient ^= MASK_X_INVERT;
if (win->rotation & BIT(DRM_REFLECT_Y))
orient ^= MASK_Y_INVERT;
/* adjust x,y offset for flip/invert: */
if (orient & MASK_XY_FLIP)
swap(w, h);
if (orient & MASK_Y_INVERT)
y += h - 1;
if (orient & MASK_X_INVERT)
x += w - 1;
omap_gem_rotated_paddr(plane->bo, orient, x, y, &info->paddr);
info->rotation_type = OMAP_DSS_ROT_TILER;
info->screen_width = omap_gem_tiled_stride(plane->bo, orient);
} else {
switch (win->rotation & 0xf) {
case 0:
case BIT(DRM_ROTATE_0):
/* OK */
break;
default:
dev_warn(fb->dev->dev,
"rotation '%d' ignored for non-tiled fb\n",
win->rotation);
win->rotation = 0;
break;
}
info->paddr = get_linear_addr(plane, format, 0, x, y);
info->rotation_type = OMAP_DSS_ROT_DMA;
info->screen_width = plane->pitch;
}
/* convert to pixels: */
info->screen_width /= format->planes[0].stride_bpp;
if (format->dss_format == OMAP_DSS_COLOR_NV12) {
plane = &omap_fb->planes[1];
if (info->rotation_type == OMAP_DSS_ROT_TILER) {
WARN_ON(!(omap_gem_flags(plane->bo) & OMAP_BO_TILED));
omap_gem_rotated_paddr(plane->bo, orient,
x/2, y/2, &info->p_uv_addr);
} else {
info->p_uv_addr = get_linear_addr(plane, format, 1, x, y);
}
} else {
info->p_uv_addr = 0;
}
}
/* pin, prepare for scanout: */
int omap_framebuffer_pin(struct drm_framebuffer *fb)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
int ret, i, n = drm_format_num_planes(fb->pixel_format);
for (i = 0; i < n; i++) {
struct plane *plane = &omap_fb->planes[i];
ret = omap_gem_get_paddr(plane->bo, &plane->paddr, true);
if (ret)
goto fail;
omap_gem_dma_sync(plane->bo, DMA_TO_DEVICE);
}
return 0;
fail:
for (i--; i >= 0; i--) {
struct plane *plane = &omap_fb->planes[i];
omap_gem_put_paddr(plane->bo);
plane->paddr = 0;
}
return ret;
}
/* unpin, no longer being scanned out: */
int omap_framebuffer_unpin(struct drm_framebuffer *fb)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
int ret, i, n = drm_format_num_planes(fb->pixel_format);
for (i = 0; i < n; i++) {
struct plane *plane = &omap_fb->planes[i];
ret = omap_gem_put_paddr(plane->bo);
if (ret)
goto fail;
plane->paddr = 0;
}
return 0;
fail:
return ret;
}
struct drm_gem_object *omap_framebuffer_bo(struct drm_framebuffer *fb, int p)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
if (p >= drm_format_num_planes(fb->pixel_format))
return NULL;
return omap_fb->planes[p].bo;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
/* iterate thru all the connectors, returning ones that are attached
* to the same fb..
*/
struct drm_connector *omap_framebuffer_get_next_connector(
struct drm_framebuffer *fb, struct drm_connector *from)
{
struct drm_device *dev = fb->dev;
struct list_head *connector_list = &dev->mode_config.connector_list;
struct drm_connector *connector = from;
if (!from)
return list_first_entry_or_null(connector_list, typeof(*from),
head);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
list_for_each_entry_from(connector, connector_list, head) {
if (connector != from) {
struct drm_encoder *encoder = connector->encoder;
struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
if (crtc && crtc->primary->fb == fb)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return connector;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
}
return NULL;
}
/* flush an area of the framebuffer (in case of manual update display that
* is not automatically flushed)
*/
void omap_framebuffer_flush(struct drm_framebuffer *fb,
int x, int y, int w, int h)
{
struct drm_connector *connector = NULL;
VERB("flush: %d,%d %dx%d, fb=%p", x, y, w, h, fb);
drm: Split connection_mutex out of mode_config.mutex (v3) After the split-out of crtc locks from the big mode_config.mutex there's still two major areas it protects: - Various connector probe states, like connector->status, EDID properties, probed mode lists and similar information. - The links from connector->encoder and encoder->crtc and other modeset-relevant connector state (e.g. properties which control the panel fitter). The later is used by modeset operations. But they don't really care about the former since it's allowed to e.g. enable a disconnected VGA output or with a mode not in the probed list. Thus far this hasn't been a problem, but for the atomic modeset conversion Rob Clark needs to convert all modeset relevant locks into w/w locks. This is required because the order of acquisition is determined by how userspace supplies the atomic modeset data. This has run into troubles in the detect path since the i915 load detect code needs _both_ protections offered by the mode_config.mutex: It updates probe state and it needs to change the modeset configuration to enable the temporary load detect pipe. The big deal here is that for the probe/detect users of this lock a plain mutex fits best, but for atomic modesets we really want a w/w mutex. To fix this lets split out a new connection_mutex lock for the modeset relevant parts. For simplicity I've decided to only add one additional lock for all connector/encoder links and modeset configuration states. We have piles of different modeset objects in addition to those (like bridges or panels), so adding per-object locks would be much more effort. Also, we're guaranteed (at least for now) to do a full modeset if we need to acquire this lock. Which means that fine-grained locking is fairly irrelevant compared to the amount of time the full modeset will take. I've done a full audit, and there's just a few things that justify special focus: - Locking in drm_sysfs.c is almost completely absent. We should sprinkle mode_config.connection_mutex over this file a bit, but since it already lacks mode_config.mutex this patch wont make the situation any worse. This is material for a follow-up patch. - omap has a omap_framebuffer_flush function which walks the connector->encoder->crtc links and is called from many contexts. Some look like they don't acquire mode_config.mutex, so this is already racy. Again fixing this is material for a separate patch. - The radeon hot_plug function to retrain DP links looks at connector->dpms. Currently this happens without any locking, so is already racy. I think radeon_hotplug_work_func should gain mutex_lock/unlock calls for the mode_config.connection_mutex. - Same applies to i915's intel_dp_hot_plug. But again, this is already racy. - i915 load_detect code needs to acquire this lock. Which means the w/w dance due to Rob's work will be nicely contained to _just_ this function. I've added fixme comments everywhere where it looks suspicious but in the sysfs code. After a quick irc discussion with Dave Airlie it sounds like the lack of locking in there is due to sysfs cleanup fun at module unload. v1: original (only compile tested) v2: missing mutex_init(), etc (from Rob Clark) v3: i915 needs more care in the conversion: - Protect the edp pp logic with the connection_mutex. - Use connection_mutex in the backlight code due to get_pipe_from_connector. - Use drm_modeset_lock_all in suspend/resume paths. - Update lock checks in the overlay code. Cc: Alex Deucher <alexdeucher@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Rob Clark <robdclark@gmail.com>
2014-05-30 04:54:47 +07:00
/* FIXME: This is racy - no protection against modeset config changes. */
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
while ((connector = omap_framebuffer_get_next_connector(fb, connector))) {
/* only consider connectors that are part of a chain */
if (connector->encoder && connector->encoder->crtc) {
/* TODO: maybe this should propagate thru the crtc who
* could do the coordinate translation..
*/
struct drm_crtc *crtc = connector->encoder->crtc;
int cx = max(0, x - crtc->x);
int cy = max(0, y - crtc->y);
int cw = w + (x - crtc->x) - cx;
int ch = h + (y - crtc->y) - cy;
omap_connector_flush(connector, cx, cy, cw, ch);
}
}
}
#ifdef CONFIG_DEBUG_FS
void omap_framebuffer_describe(struct drm_framebuffer *fb, struct seq_file *m)
{
struct omap_framebuffer *omap_fb = to_omap_framebuffer(fb);
int i, n = drm_format_num_planes(fb->pixel_format);
seq_printf(m, "fb: %dx%d@%4.4s\n", fb->width, fb->height,
(char *)&fb->pixel_format);
for (i = 0; i < n; i++) {
struct plane *plane = &omap_fb->planes[i];
seq_printf(m, " %d: offset=%d pitch=%d, obj: ",
i, plane->offset, plane->pitch);
omap_gem_describe(plane->bo, m);
}
}
#endif
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
struct drm_framebuffer *omap_framebuffer_create(struct drm_device *dev,
struct drm_file *file, struct drm_mode_fb_cmd2 *mode_cmd)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
{
struct drm_gem_object *bos[4];
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
struct drm_framebuffer *fb;
int ret;
ret = objects_lookup(dev, file, mode_cmd->pixel_format,
bos, mode_cmd->handles);
if (ret)
return ERR_PTR(ret);
fb = omap_framebuffer_init(dev, mode_cmd, bos);
if (IS_ERR(fb)) {
int i, n = drm_format_num_planes(mode_cmd->pixel_format);
for (i = 0; i < n; i++)
drm_gem_object_unreference_unlocked(bos[i]);
return fb;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
return fb;
}
struct drm_framebuffer *omap_framebuffer_init(struct drm_device *dev,
struct drm_mode_fb_cmd2 *mode_cmd, struct drm_gem_object **bos)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
{
struct omap_framebuffer *omap_fb;
struct drm_framebuffer *fb = NULL;
const struct format *format = NULL;
int ret, i, n = drm_format_num_planes(mode_cmd->pixel_format);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
DBG("create framebuffer: dev=%p, mode_cmd=%p (%dx%d@%4.4s)",
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
dev, mode_cmd, mode_cmd->width, mode_cmd->height,
(char *)&mode_cmd->pixel_format);
for (i = 0; i < ARRAY_SIZE(formats); i++) {
if (formats[i].pixel_format == mode_cmd->pixel_format) {
format = &formats[i];
break;
}
}
if (!format) {
dev_err(dev->dev, "unsupported pixel format: %4.4s\n",
(char *)&mode_cmd->pixel_format);
ret = -EINVAL;
goto fail;
}
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
omap_fb = kzalloc(sizeof(*omap_fb), GFP_KERNEL);
if (!omap_fb) {
ret = -ENOMEM;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
goto fail;
}
fb = &omap_fb->base;
omap_fb->format = format;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
for (i = 0; i < n; i++) {
struct plane *plane = &omap_fb->planes[i];
int size, pitch = mode_cmd->pitches[i];
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
if (pitch < (mode_cmd->width * format->planes[i].stride_bpp)) {
dev_err(dev->dev, "provided buffer pitch is too small! %d < %d\n",
pitch, mode_cmd->width * format->planes[i].stride_bpp);
ret = -EINVAL;
goto fail;
}
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
size = pitch * mode_cmd->height / format->planes[i].sub_y;
if (size > (omap_gem_mmap_size(bos[i]) - mode_cmd->offsets[i])) {
dev_err(dev->dev, "provided buffer object is too small! %d < %d\n",
bos[i]->size - mode_cmd->offsets[i], size);
ret = -EINVAL;
goto fail;
}
plane->bo = bos[i];
plane->offset = mode_cmd->offsets[i];
plane->pitch = pitch;
plane->paddr = 0;
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}
drm_helper_mode_fill_fb_struct(fb, mode_cmd);
ret = drm_framebuffer_init(dev, fb, &omap_framebuffer_funcs);
if (ret) {
dev_err(dev->dev, "framebuffer init failed: %d\n", ret);
goto fail;
}
DBG("create: FB ID: %d (%p)", fb->base.id, fb);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
return fb;
fail:
if (fb)
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
omap_framebuffer_destroy(fb);
return ERR_PTR(ret);
staging: add omapdrm DRM/KMS driver for TI OMAP platforms A DRM display driver for TI OMAP platform. Similar to omapfb (fbdev) and omap_vout (v4l2 display) drivers in the past, this driver uses the DSS2 driver to access the display hardware, including support for HDMI, DVI, and various types of LCD panels. And it implements GEM support for buffer allocation (for KMS as well as offscreen buffers used by the xf86-video-omap userspace xorg driver). The driver maps CRTCs to overlays, encoders to overlay-managers, and connectors to dssdev's. Note that this arrangement might change slightly when support for drm_plane overlays is added. For GEM support, non-scanout buffers are using the shmem backed pages provided by GEM core (In drm_gem_object_init()). In the case of scanout buffers, which need to be physically contiguous, those are allocated with CMA and use drm_gem_private_object_init(). See userspace xorg driver: git://github.com/robclark/xf86-video-omap.git Refer to this link for CMA (Continuous Memory Allocator): http://lkml.org/lkml/2011/8/19/302 Links to previous versions of the patch: v1: http://lwn.net/Articles/458137/ v2: http://patches.linaro.org/4156/ v3: http://patches.linaro.org/4688/ v4: http://patches.linaro.org/4791/ History: v5: move headers from include/drm at Greg KH's request, minor rebasing on 3.2-rc1, pull in private copies of drm_gem_{get,put}_pages() because "drm/gem: add functions to get/put pages" patch is not merged yet v4: bit of rework of encoder/connector _dpms() code, modeset_init() rework to not use nested functions, update TODO.txt v3: minor cleanups, improved error handling for dev_load(), some minor API changes that will be needed later for tiled buffer support v2: replace omap_vram with CMA for scanout buffer allocation, remove unneeded functions, use dma_addr_t for physical addresses, error handling cleanup, refactor attach/detach pages into common drm functions, split non-userspace-facing API into omap_priv.h, remove plugin API v1: original Signed-off-by: Rob Clark <rob@ti.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-13 01:09:40 +07:00
}