linux_dsm_epyc7002/arch/tile/kernel/hardwall.c

1097 lines
30 KiB
C
Raw Normal View History

arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/*
* Copyright 2010 Tilera Corporation. All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation, version 2.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for
* more details.
*/
#include <linux/fs.h>
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
#include <linux/rwsem.h>
#include <linux/kprobes.h>
#include <linux/sched.h>
#include <linux/hardirq.h>
#include <linux/uaccess.h>
#include <linux/smp.h>
#include <linux/cdev.h>
#include <linux/compat.h>
#include <asm/hardwall.h>
#include <asm/traps.h>
#include <asm/siginfo.h>
#include <asm/irq_regs.h>
#include <arch/interrupts.h>
#include <arch/spr_def.h>
/*
* Implement a per-cpu "hardwall" resource class such as UDN or IPI.
* We use "hardwall" nomenclature throughout for historical reasons.
* The lock here controls access to the list data structure as well as
* to the items on the list.
*/
struct hardwall_type {
int index;
int is_xdn;
int is_idn;
int disabled;
const char *name;
struct list_head list;
spinlock_t lock;
struct proc_dir_entry *proc_dir;
};
enum hardwall_index {
HARDWALL_UDN = 0,
#ifndef __tilepro__
HARDWALL_IDN = 1,
HARDWALL_IPI = 2,
#endif
_HARDWALL_TYPES
};
static struct hardwall_type hardwall_types[] = {
{ /* user-space access to UDN */
0,
1,
0,
0,
"udn",
LIST_HEAD_INIT(hardwall_types[HARDWALL_UDN].list),
__SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_UDN].lock),
NULL
},
#ifndef __tilepro__
{ /* user-space access to IDN */
1,
1,
1,
1, /* disabled pending hypervisor support */
"idn",
LIST_HEAD_INIT(hardwall_types[HARDWALL_IDN].list),
__SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IDN].lock),
NULL
},
{ /* access to user-space IPI */
2,
0,
0,
0,
"ipi",
LIST_HEAD_INIT(hardwall_types[HARDWALL_IPI].list),
__SPIN_LOCK_UNLOCKED(hardwall_types[HARDWALL_IPI].lock),
NULL
},
#endif
};
/*
* This data structure tracks the cpu data, etc., associated
* one-to-one with a "struct file *" from opening a hardwall device file.
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
* Note that the file's private data points back to this structure.
*/
struct hardwall_info {
struct list_head list; /* for hardwall_types.list */
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
struct list_head task_head; /* head of tasks in this hardwall */
struct hardwall_type *type; /* type of this resource */
struct cpumask cpumask; /* cpus reserved */
int id; /* integer id for this hardwall */
int teardown_in_progress; /* are we tearing this one down? */
/* Remaining fields only valid for user-network resources. */
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
int ulhc_x; /* upper left hand corner x coord */
int ulhc_y; /* upper left hand corner y coord */
int width; /* rectangle width */
int height; /* rectangle height */
#if CHIP_HAS_REV1_XDN()
atomic_t xdn_pending_count; /* cores in phase 1 of drain */
#endif
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
};
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
/* /proc/tile/hardwall */
static struct proc_dir_entry *hardwall_proc_dir;
/* Functions to manage files in /proc/tile/hardwall. */
static void hardwall_add_proc(struct hardwall_info *);
static void hardwall_remove_proc(struct hardwall_info *);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Allow disabling UDN access. */
static int __init noudn(char *str)
{
pr_info("User-space UDN access is disabled\n");
hardwall_types[HARDWALL_UDN].disabled = 1;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return 0;
}
early_param("noudn", noudn);
#ifndef __tilepro__
/* Allow disabling IDN access. */
static int __init noidn(char *str)
{
pr_info("User-space IDN access is disabled\n");
hardwall_types[HARDWALL_IDN].disabled = 1;
return 0;
}
early_param("noidn", noidn);
/* Allow disabling IPI access. */
static int __init noipi(char *str)
{
pr_info("User-space IPI access is disabled\n");
hardwall_types[HARDWALL_IPI].disabled = 1;
return 0;
}
early_param("noipi", noipi);
#endif
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/*
* Low-level primitives for UDN/IDN
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
*/
#ifdef __tilepro__
#define mtspr_XDN(hwt, name, val) \
do { (void)(hwt); __insn_mtspr(SPR_UDN_##name, (val)); } while (0)
#define mtspr_MPL_XDN(hwt, name, val) \
do { (void)(hwt); __insn_mtspr(SPR_MPL_UDN_##name, (val)); } while (0)
#define mfspr_XDN(hwt, name) \
((void)(hwt), __insn_mfspr(SPR_UDN_##name))
#else
#define mtspr_XDN(hwt, name, val) \
do { \
if ((hwt)->is_idn) \
__insn_mtspr(SPR_IDN_##name, (val)); \
else \
__insn_mtspr(SPR_UDN_##name, (val)); \
} while (0)
#define mtspr_MPL_XDN(hwt, name, val) \
do { \
if ((hwt)->is_idn) \
__insn_mtspr(SPR_MPL_IDN_##name, (val)); \
else \
__insn_mtspr(SPR_MPL_UDN_##name, (val)); \
} while (0)
#define mfspr_XDN(hwt, name) \
((hwt)->is_idn ? __insn_mfspr(SPR_IDN_##name) : __insn_mfspr(SPR_UDN_##name))
#endif
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Set a CPU bit if the CPU is online. */
#define cpu_online_set(cpu, dst) do { \
if (cpu_online(cpu)) \
cpumask_set_cpu(cpu, dst); \
} while (0)
/* Does the given rectangle contain the given x,y coordinate? */
static int contains(struct hardwall_info *r, int x, int y)
{
return (x >= r->ulhc_x && x < r->ulhc_x + r->width) &&
(y >= r->ulhc_y && y < r->ulhc_y + r->height);
}
/* Compute the rectangle parameters and validate the cpumask. */
static int check_rectangle(struct hardwall_info *r, struct cpumask *mask)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
int x, y, cpu, ulhc, lrhc;
/* The first cpu is the ULHC, the last the LRHC. */
ulhc = find_first_bit(cpumask_bits(mask), nr_cpumask_bits);
lrhc = find_last_bit(cpumask_bits(mask), nr_cpumask_bits);
/* Compute the rectangle attributes from the cpus. */
r->ulhc_x = cpu_x(ulhc);
r->ulhc_y = cpu_y(ulhc);
r->width = cpu_x(lrhc) - r->ulhc_x + 1;
r->height = cpu_y(lrhc) - r->ulhc_y + 1;
/* Width and height must be positive */
if (r->width <= 0 || r->height <= 0)
return -EINVAL;
/* Confirm that the cpumask is exactly the rectangle. */
for (y = 0, cpu = 0; y < smp_height; ++y)
for (x = 0; x < smp_width; ++x, ++cpu)
if (cpumask_test_cpu(cpu, mask) != contains(r, x, y))
return -EINVAL;
/*
* Note that offline cpus can't be drained when this user network
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
* rectangle eventually closes. We used to detect this
* situation and print a warning, but it annoyed users and
* they ignored it anyway, so now we just return without a
* warning.
*/
return 0;
}
/*
* Hardware management of hardwall setup, teardown, trapping,
* and enabling/disabling PL0 access to the networks.
*/
/* Bit field values to mask together for writes to SPR_XDN_DIRECTION_PROTECT */
enum direction_protect {
N_PROTECT = (1 << 0),
E_PROTECT = (1 << 1),
S_PROTECT = (1 << 2),
W_PROTECT = (1 << 3),
C_PROTECT = (1 << 4),
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
};
static inline int xdn_which_interrupt(struct hardwall_type *hwt)
{
#ifndef __tilepro__
if (hwt->is_idn)
return INT_IDN_FIREWALL;
#endif
return INT_UDN_FIREWALL;
}
static void enable_firewall_interrupts(struct hardwall_type *hwt)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
arch_local_irq_unmask_now(xdn_which_interrupt(hwt));
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
static void disable_firewall_interrupts(struct hardwall_type *hwt)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
arch_local_irq_mask_now(xdn_which_interrupt(hwt));
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/* Set up hardwall on this cpu based on the passed hardwall_info. */
static void hardwall_setup_func(void *info)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
struct hardwall_info *r = info;
struct hardwall_type *hwt = r->type;
int cpu = smp_processor_id(); /* on_each_cpu disables preemption */
int x = cpu_x(cpu);
int y = cpu_y(cpu);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
int bits = 0;
if (x == r->ulhc_x)
bits |= W_PROTECT;
if (x == r->ulhc_x + r->width - 1)
bits |= E_PROTECT;
if (y == r->ulhc_y)
bits |= N_PROTECT;
if (y == r->ulhc_y + r->height - 1)
bits |= S_PROTECT;
BUG_ON(bits == 0);
mtspr_XDN(hwt, DIRECTION_PROTECT, bits);
enable_firewall_interrupts(hwt);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/* Set up all cpus on edge of rectangle to enable/disable hardwall SPRs. */
static void hardwall_protect_rectangle(struct hardwall_info *r)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
int x, y, cpu, delta;
struct cpumask rect_cpus;
cpumask_clear(&rect_cpus);
/* First include the top and bottom edges */
cpu = r->ulhc_y * smp_width + r->ulhc_x;
delta = (r->height - 1) * smp_width;
for (x = 0; x < r->width; ++x, ++cpu) {
cpu_online_set(cpu, &rect_cpus);
cpu_online_set(cpu + delta, &rect_cpus);
}
/* Then the left and right edges */
cpu -= r->width;
delta = r->width - 1;
for (y = 0; y < r->height; ++y, cpu += smp_width) {
cpu_online_set(cpu, &rect_cpus);
cpu_online_set(cpu + delta, &rect_cpus);
}
/* Then tell all the cpus to set up their protection SPR */
on_each_cpu_mask(&rect_cpus, hardwall_setup_func, r, 1);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/* Entered from INT_xDN_FIREWALL interrupt vector with irqs disabled. */
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
void __kprobes do_hardwall_trap(struct pt_regs* regs, int fault_num)
{
struct hardwall_info *rect;
struct hardwall_type *hwt;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
struct task_struct *p;
struct siginfo info;
int cpu = smp_processor_id();
int found_processes;
struct pt_regs *old_regs = set_irq_regs(regs);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
irq_enter();
/* Figure out which network trapped. */
switch (fault_num) {
#ifndef __tilepro__
case INT_IDN_FIREWALL:
hwt = &hardwall_types[HARDWALL_IDN];
break;
#endif
case INT_UDN_FIREWALL:
hwt = &hardwall_types[HARDWALL_UDN];
break;
default:
BUG();
}
BUG_ON(hwt->disabled);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* This tile trapped a network access; find the rectangle. */
spin_lock(&hwt->lock);
list_for_each_entry(rect, &hwt->list, list) {
if (cpumask_test_cpu(cpu, &rect->cpumask))
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
break;
}
/*
* It shouldn't be possible not to find this cpu on the
* rectangle list, since only cpus in rectangles get hardwalled.
* The hardwall is only removed after the user network is drained.
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
*/
BUG_ON(&rect->list == &hwt->list);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/*
* If we already started teardown on this hardwall, don't worry;
* the abort signal has been sent and we are just waiting for things
* to quiesce.
*/
if (rect->teardown_in_progress) {
pr_notice("cpu %d: detected %s hardwall violation %#lx while teardown already in progress\n",
cpu, hwt->name,
(long)mfspr_XDN(hwt, DIRECTION_PROTECT));
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
goto done;
}
/*
* Kill off any process that is activated in this rectangle.
* We bypass security to deliver the signal, since it must be
* one of the activated processes that generated the user network
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
* message that caused this trap, and all the activated
* processes shared a single open file so are pretty tightly
* bound together from a security point of view to begin with.
*/
rect->teardown_in_progress = 1;
wmb(); /* Ensure visibility of rectangle before notifying processes. */
pr_notice("cpu %d: detected %s hardwall violation %#lx...\n",
cpu, hwt->name, (long)mfspr_XDN(hwt, DIRECTION_PROTECT));
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
info.si_signo = SIGILL;
info.si_errno = 0;
info.si_code = ILL_HARDWALL;
found_processes = 0;
list_for_each_entry(p, &rect->task_head,
thread.hardwall[hwt->index].list) {
BUG_ON(p->thread.hardwall[hwt->index].info != rect);
if (!(p->flags & PF_EXITING)) {
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
found_processes = 1;
pr_notice("hardwall: killing %d\n", p->pid);
do_send_sig_info(info.si_signo, &info, p, false);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
}
if (!found_processes)
pr_notice("hardwall: no associated processes!\n");
done:
spin_unlock(&hwt->lock);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/*
* We have to disable firewall interrupts now, or else when we
* return from this handler, we will simply re-interrupt back to
* it. However, we can't clear the protection bits, since we
* haven't yet drained the network, and that would allow packets
* to cross out of the hardwall region.
*/
disable_firewall_interrupts(hwt);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
irq_exit();
set_irq_regs(old_regs);
}
/* Allow access from user space to the user network. */
void grant_hardwall_mpls(struct hardwall_type *hwt)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
#ifndef __tilepro__
if (!hwt->is_xdn) {
__insn_mtspr(SPR_MPL_IPI_0_SET_0, 1);
return;
}
#endif
mtspr_MPL_XDN(hwt, ACCESS_SET_0, 1);
mtspr_MPL_XDN(hwt, AVAIL_SET_0, 1);
mtspr_MPL_XDN(hwt, COMPLETE_SET_0, 1);
mtspr_MPL_XDN(hwt, TIMER_SET_0, 1);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
#if !CHIP_HAS_REV1_XDN()
mtspr_MPL_XDN(hwt, REFILL_SET_0, 1);
mtspr_MPL_XDN(hwt, CA_SET_0, 1);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
#endif
}
/* Deny access from user space to the user network. */
void restrict_hardwall_mpls(struct hardwall_type *hwt)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
#ifndef __tilepro__
if (!hwt->is_xdn) {
__insn_mtspr(SPR_MPL_IPI_0_SET_1, 1);
return;
}
#endif
mtspr_MPL_XDN(hwt, ACCESS_SET_1, 1);
mtspr_MPL_XDN(hwt, AVAIL_SET_1, 1);
mtspr_MPL_XDN(hwt, COMPLETE_SET_1, 1);
mtspr_MPL_XDN(hwt, TIMER_SET_1, 1);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
#if !CHIP_HAS_REV1_XDN()
mtspr_MPL_XDN(hwt, REFILL_SET_1, 1);
mtspr_MPL_XDN(hwt, CA_SET_1, 1);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
#endif
}
/* Restrict or deny as necessary for the task we're switching to. */
void hardwall_switch_tasks(struct task_struct *prev,
struct task_struct *next)
{
int i;
for (i = 0; i < HARDWALL_TYPES; ++i) {
if (prev->thread.hardwall[i].info != NULL) {
if (next->thread.hardwall[i].info == NULL)
restrict_hardwall_mpls(&hardwall_types[i]);
} else if (next->thread.hardwall[i].info != NULL) {
grant_hardwall_mpls(&hardwall_types[i]);
}
}
}
/* Does this task have the right to IPI the given cpu? */
int hardwall_ipi_valid(int cpu)
{
#ifdef __tilegx__
struct hardwall_info *info =
current->thread.hardwall[HARDWALL_IPI].info;
return info && cpumask_test_cpu(cpu, &info->cpumask);
#else
return 0;
#endif
}
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/*
* Code to create, activate, deactivate, and destroy hardwall resources.
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
*/
/* Create a hardwall for the given resource */
static struct hardwall_info *hardwall_create(struct hardwall_type *hwt,
size_t size,
const unsigned char __user *bits)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
struct hardwall_info *iter, *info;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
struct cpumask mask;
unsigned long flags;
int rc;
/* Reject crazy sizes out of hand, a la sys_mbind(). */
if (size > PAGE_SIZE)
return ERR_PTR(-EINVAL);
/* Copy whatever fits into a cpumask. */
if (copy_from_user(&mask, bits, min(sizeof(struct cpumask), size)))
return ERR_PTR(-EFAULT);
/*
* If the size was short, clear the rest of the mask;
* otherwise validate that the rest of the user mask was zero
* (we don't try hard to be efficient when validating huge masks).
*/
if (size < sizeof(struct cpumask)) {
memset((char *)&mask + size, 0, sizeof(struct cpumask) - size);
} else if (size > sizeof(struct cpumask)) {
size_t i;
for (i = sizeof(struct cpumask); i < size; ++i) {
char c;
if (get_user(c, &bits[i]))
return ERR_PTR(-EFAULT);
if (c)
return ERR_PTR(-EINVAL);
}
}
/* Allocate a new hardwall_info optimistically. */
info = kmalloc(sizeof(struct hardwall_info),
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
GFP_KERNEL | __GFP_ZERO);
if (info == NULL)
return ERR_PTR(-ENOMEM);
INIT_LIST_HEAD(&info->task_head);
info->type = hwt;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Compute the rectangle size and validate that it's plausible. */
cpumask_copy(&info->cpumask, &mask);
info->id = find_first_bit(cpumask_bits(&mask), nr_cpumask_bits);
if (hwt->is_xdn) {
rc = check_rectangle(info, &mask);
if (rc != 0) {
kfree(info);
return ERR_PTR(rc);
}
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/*
* Eliminate cpus that are not part of this Linux client.
* Note that this allows for configurations that we might not want to
* support, such as one client on every even cpu, another client on
* every odd cpu.
*/
cpumask_and(&info->cpumask, &info->cpumask, cpu_online_mask);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Confirm it doesn't overlap and add it to the list. */
spin_lock_irqsave(&hwt->lock, flags);
list_for_each_entry(iter, &hwt->list, list) {
if (cpumask_intersects(&iter->cpumask, &info->cpumask)) {
spin_unlock_irqrestore(&hwt->lock, flags);
kfree(info);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return ERR_PTR(-EBUSY);
}
}
list_add_tail(&info->list, &hwt->list);
spin_unlock_irqrestore(&hwt->lock, flags);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Set up appropriate hardwalling on all affected cpus. */
if (hwt->is_xdn)
hardwall_protect_rectangle(info);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
/* Create a /proc/tile/hardwall entry. */
hardwall_add_proc(info);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
return info;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/* Activate a given hardwall on this cpu for this process. */
static int hardwall_activate(struct hardwall_info *info)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
int cpu;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
unsigned long flags;
struct task_struct *p = current;
struct thread_struct *ts = &p->thread;
struct hardwall_type *hwt;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Require a hardwall. */
if (info == NULL)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return -ENODATA;
/* Not allowed to activate a hardwall that is being torn down. */
if (info->teardown_in_progress)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return -EINVAL;
/*
* Get our affinity; if we're not bound to this tile uniquely,
* we can't access the network registers.
*/
if (cpumask_weight(&p->cpus_allowed) != 1)
return -EPERM;
/* Make sure we are bound to a cpu assigned to this resource. */
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
cpu = smp_processor_id();
BUG_ON(cpumask_first(&p->cpus_allowed) != cpu);
if (!cpumask_test_cpu(cpu, &info->cpumask))
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return -EINVAL;
/* If we are already bound to this hardwall, it's a no-op. */
hwt = info->type;
if (ts->hardwall[hwt->index].info) {
BUG_ON(ts->hardwall[hwt->index].info != info);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return 0;
}
/* Success! This process gets to use the resource on this cpu. */
ts->hardwall[hwt->index].info = info;
spin_lock_irqsave(&hwt->lock, flags);
list_add(&ts->hardwall[hwt->index].list, &info->task_head);
spin_unlock_irqrestore(&hwt->lock, flags);
grant_hardwall_mpls(hwt);
printk(KERN_DEBUG "Pid %d (%s) activated for %s hardwall: cpu %d\n",
p->pid, p->comm, hwt->name, cpu);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return 0;
}
/*
* Deactivate a task's hardwall. Must hold lock for hardwall_type.
* This method may be called from exit_thread(), so we don't want to
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
* rely on too many fields of struct task_struct still being valid.
* We assume the cpus_allowed, pid, and comm fields are still valid.
*/
static void _hardwall_deactivate(struct hardwall_type *hwt,
struct task_struct *task)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
struct thread_struct *ts = &task->thread;
if (cpumask_weight(&task->cpus_allowed) != 1) {
pr_err("pid %d (%s) releasing %s hardwall with an affinity mask containing %d cpus!\n",
task->pid, task->comm, hwt->name,
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
cpumask_weight(&task->cpus_allowed));
BUG();
}
BUG_ON(ts->hardwall[hwt->index].info == NULL);
ts->hardwall[hwt->index].info = NULL;
list_del(&ts->hardwall[hwt->index].list);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
if (task == current)
restrict_hardwall_mpls(hwt);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/* Deactivate a task's hardwall. */
static int hardwall_deactivate(struct hardwall_type *hwt,
struct task_struct *task)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
unsigned long flags;
int activated;
spin_lock_irqsave(&hwt->lock, flags);
activated = (task->thread.hardwall[hwt->index].info != NULL);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
if (activated)
_hardwall_deactivate(hwt, task);
spin_unlock_irqrestore(&hwt->lock, flags);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
if (!activated)
return -EINVAL;
printk(KERN_DEBUG "Pid %d (%s) deactivated for %s hardwall: cpu %d\n",
task->pid, task->comm, hwt->name, raw_smp_processor_id());
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return 0;
}
void hardwall_deactivate_all(struct task_struct *task)
{
int i;
for (i = 0; i < HARDWALL_TYPES; ++i)
if (task->thread.hardwall[i].info)
hardwall_deactivate(&hardwall_types[i], task);
}
/* Stop the switch before draining the network. */
static void stop_xdn_switch(void *arg)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
#if !CHIP_HAS_REV1_XDN()
/* Freeze the switch and the demux. */
__insn_mtspr(SPR_UDN_SP_FREEZE,
SPR_UDN_SP_FREEZE__SP_FRZ_MASK |
SPR_UDN_SP_FREEZE__DEMUX_FRZ_MASK |
SPR_UDN_SP_FREEZE__NON_DEST_EXT_MASK);
#else
/*
* Drop all packets bound for the core or off the edge.
* We rely on the normal hardwall protection setup code
* to have set the low four bits to trigger firewall interrupts,
* and shift those bits up to trigger "drop on send" semantics,
* plus adding "drop on send to core" for all switches.
* In practice it seems the switches latch the DIRECTION_PROTECT
* SPR so they won't start dropping if they're already
* delivering the last message to the core, but it doesn't
* hurt to enable it here.
*/
struct hardwall_type *hwt = arg;
unsigned long protect = mfspr_XDN(hwt, DIRECTION_PROTECT);
mtspr_XDN(hwt, DIRECTION_PROTECT, (protect | C_PROTECT) << 5);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
#endif
}
static void empty_xdn_demuxes(struct hardwall_type *hwt)
{
#ifndef __tilepro__
if (hwt->is_idn) {
while (__insn_mfspr(SPR_IDN_DATA_AVAIL) & (1 << 0))
(void) __tile_idn0_receive();
while (__insn_mfspr(SPR_IDN_DATA_AVAIL) & (1 << 1))
(void) __tile_idn1_receive();
return;
}
#endif
while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 0))
(void) __tile_udn0_receive();
while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 1))
(void) __tile_udn1_receive();
while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 2))
(void) __tile_udn2_receive();
while (__insn_mfspr(SPR_UDN_DATA_AVAIL) & (1 << 3))
(void) __tile_udn3_receive();
}
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Drain all the state from a stopped switch. */
static void drain_xdn_switch(void *arg)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
struct hardwall_info *info = arg;
struct hardwall_type *hwt = info->type;
#if CHIP_HAS_REV1_XDN()
/*
* The switches have been configured to drop any messages
* destined for cores (or off the edge of the rectangle).
* But the current message may continue to be delivered,
* so we wait until all the cores have finished any pending
* messages before we stop draining.
*/
int pending = mfspr_XDN(hwt, PENDING);
while (pending--) {
empty_xdn_demuxes(hwt);
if (hwt->is_idn)
__tile_idn_send(0);
else
__tile_udn_send(0);
}
atomic_dec(&info->xdn_pending_count);
while (atomic_read(&info->xdn_pending_count))
empty_xdn_demuxes(hwt);
#else
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
int i;
int from_tile_words, ca_count;
/* Empty out the 5 switch point fifos. */
for (i = 0; i < 5; i++) {
int words, j;
__insn_mtspr(SPR_UDN_SP_FIFO_SEL, i);
words = __insn_mfspr(SPR_UDN_SP_STATE) & 0xF;
for (j = 0; j < words; j++)
(void) __insn_mfspr(SPR_UDN_SP_FIFO_DATA);
BUG_ON((__insn_mfspr(SPR_UDN_SP_STATE) & 0xF) != 0);
}
/* Dump out the 3 word fifo at top. */
from_tile_words = (__insn_mfspr(SPR_UDN_DEMUX_STATUS) >> 10) & 0x3;
for (i = 0; i < from_tile_words; i++)
(void) __insn_mfspr(SPR_UDN_DEMUX_WRITE_FIFO);
/* Empty out demuxes. */
empty_xdn_demuxes(hwt);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Empty out catch all. */
ca_count = __insn_mfspr(SPR_UDN_DEMUX_CA_COUNT);
for (i = 0; i < ca_count; i++)
(void) __insn_mfspr(SPR_UDN_CA_DATA);
BUG_ON(__insn_mfspr(SPR_UDN_DEMUX_CA_COUNT) != 0);
/* Clear demux logic. */
__insn_mtspr(SPR_UDN_DEMUX_CTL, 1);
/*
* Write switch state; experimentation indicates that 0xc3000
* is an idle switch point.
*/
for (i = 0; i < 5; i++) {
__insn_mtspr(SPR_UDN_SP_FIFO_SEL, i);
__insn_mtspr(SPR_UDN_SP_STATE, 0xc3000);
}
#endif
}
/* Reset random XDN state registers at boot up and during hardwall teardown. */
static void reset_xdn_network_state(struct hardwall_type *hwt)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
if (hwt->disabled)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return;
/* Clear out other random registers so we have a clean slate. */
mtspr_XDN(hwt, DIRECTION_PROTECT, 0);
mtspr_XDN(hwt, AVAIL_EN, 0);
mtspr_XDN(hwt, DEADLOCK_TIMEOUT, 0);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
#if !CHIP_HAS_REV1_XDN()
/* Reset UDN coordinates to their standard value */
{
unsigned int cpu = smp_processor_id();
unsigned int x = cpu_x(cpu);
unsigned int y = cpu_y(cpu);
__insn_mtspr(SPR_UDN_TILE_COORD, (x << 18) | (y << 7));
}
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Set demux tags to predefined values and enable them. */
__insn_mtspr(SPR_UDN_TAG_VALID, 0xf);
__insn_mtspr(SPR_UDN_TAG_0, (1 << 0));
__insn_mtspr(SPR_UDN_TAG_1, (1 << 1));
__insn_mtspr(SPR_UDN_TAG_2, (1 << 2));
__insn_mtspr(SPR_UDN_TAG_3, (1 << 3));
/* Set other rev0 random registers to a clean state. */
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
__insn_mtspr(SPR_UDN_REFILL_EN, 0);
__insn_mtspr(SPR_UDN_DEMUX_QUEUE_SEL, 0);
__insn_mtspr(SPR_UDN_SP_FIFO_SEL, 0);
/* Start the switch and demux. */
__insn_mtspr(SPR_UDN_SP_FREEZE, 0);
#endif
}
void reset_network_state(void)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
reset_xdn_network_state(&hardwall_types[HARDWALL_UDN]);
#ifndef __tilepro__
reset_xdn_network_state(&hardwall_types[HARDWALL_IDN]);
#endif
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/* Restart an XDN switch after draining. */
static void restart_xdn_switch(void *arg)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
struct hardwall_type *hwt = arg;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
#if CHIP_HAS_REV1_XDN()
/* One last drain step to avoid races with injection and draining. */
empty_xdn_demuxes(hwt);
#endif
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
reset_xdn_network_state(hwt);
/* Disable firewall interrupts. */
disable_firewall_interrupts(hwt);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
/* Last reference to a hardwall is gone, so clear the network. */
static void hardwall_destroy(struct hardwall_info *info)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
struct task_struct *task;
struct hardwall_type *hwt;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
unsigned long flags;
/* Make sure this file actually represents a hardwall. */
if (info == NULL)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return;
/*
* Deactivate any remaining tasks. It's possible to race with
* some other thread that is exiting and hasn't yet called
* deactivate (when freeing its thread_info), so we carefully
* deactivate any remaining tasks before freeing the
* hardwall_info object itself.
*/
hwt = info->type;
info->teardown_in_progress = 1;
spin_lock_irqsave(&hwt->lock, flags);
list_for_each_entry(task, &info->task_head,
thread.hardwall[hwt->index].list)
_hardwall_deactivate(hwt, task);
spin_unlock_irqrestore(&hwt->lock, flags);
if (hwt->is_xdn) {
/* Configure the switches for draining the user network. */
printk(KERN_DEBUG
"Clearing %s hardwall rectangle %dx%d %d,%d\n",
hwt->name, info->width, info->height,
info->ulhc_x, info->ulhc_y);
on_each_cpu_mask(&info->cpumask, stop_xdn_switch, hwt, 1);
/* Drain the network. */
#if CHIP_HAS_REV1_XDN()
atomic_set(&info->xdn_pending_count,
cpumask_weight(&info->cpumask));
on_each_cpu_mask(&info->cpumask, drain_xdn_switch, info, 0);
#else
on_each_cpu_mask(&info->cpumask, drain_xdn_switch, info, 1);
#endif
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/* Restart switch and disable firewall. */
on_each_cpu_mask(&info->cpumask, restart_xdn_switch, hwt, 1);
}
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
/* Remove the /proc/tile/hardwall entry. */
hardwall_remove_proc(info);
/* Now free the hardwall from the list. */
spin_lock_irqsave(&hwt->lock, flags);
BUG_ON(!list_empty(&info->task_head));
list_del(&info->list);
spin_unlock_irqrestore(&hwt->lock, flags);
kfree(info);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
static int hardwall_proc_show(struct seq_file *sf, void *v)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
{
struct hardwall_info *info = sf->private;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
seq_printf(sf, "%*pbl\n", cpumask_pr_args(&info->cpumask));
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return 0;
}
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
static int hardwall_proc_open(struct inode *inode,
struct file *file)
{
return single_open(file, hardwall_proc_show, PDE_DATA(inode));
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
}
static const struct file_operations hardwall_proc_fops = {
.open = hardwall_proc_open,
.read = seq_read,
.llseek = seq_lseek,
.release = single_release,
};
static void hardwall_add_proc(struct hardwall_info *info)
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
{
char buf[64];
snprintf(buf, sizeof(buf), "%d", info->id);
proc_create_data(buf, 0444, info->type->proc_dir,
&hardwall_proc_fops, info);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
}
static void hardwall_remove_proc(struct hardwall_info *info)
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
{
char buf[64];
snprintf(buf, sizeof(buf), "%d", info->id);
remove_proc_entry(buf, info->type->proc_dir);
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
}
int proc_pid_hardwall(struct seq_file *m, struct pid_namespace *ns,
struct pid *pid, struct task_struct *task)
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
{
int i;
int n = 0;
for (i = 0; i < HARDWALL_TYPES; ++i) {
struct hardwall_info *info = task->thread.hardwall[i].info;
if (info)
seq_printf(m, "%s: %d\n", info->type->name, info->id);
}
return n;
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
}
void proc_tile_hardwall_init(struct proc_dir_entry *root)
{
int i;
for (i = 0; i < HARDWALL_TYPES; ++i) {
struct hardwall_type *hwt = &hardwall_types[i];
if (hwt->disabled)
continue;
if (hardwall_proc_dir == NULL)
hardwall_proc_dir = proc_mkdir("hardwall", root);
hwt->proc_dir = proc_mkdir(hwt->name, hardwall_proc_dir);
}
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
}
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/*
* Character device support via ioctl/close.
*/
static long hardwall_ioctl(struct file *file, unsigned int a, unsigned long b)
{
struct hardwall_info *info = file->private_data;
int minor = iminor(file->f_mapping->host);
struct hardwall_type* hwt;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
if (_IOC_TYPE(a) != HARDWALL_IOCTL_BASE)
return -EINVAL;
BUILD_BUG_ON(HARDWALL_TYPES != _HARDWALL_TYPES);
BUILD_BUG_ON(HARDWALL_TYPES !=
sizeof(hardwall_types)/sizeof(hardwall_types[0]));
if (minor < 0 || minor >= HARDWALL_TYPES)
return -EINVAL;
hwt = &hardwall_types[minor];
WARN_ON(info && hwt != info->type);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
switch (_IOC_NR(a)) {
case _HARDWALL_CREATE:
if (hwt->disabled)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return -ENOSYS;
if (info != NULL)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return -EALREADY;
info = hardwall_create(hwt, _IOC_SIZE(a),
(const unsigned char __user *)b);
if (IS_ERR(info))
return PTR_ERR(info);
file->private_data = info;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return 0;
case _HARDWALL_ACTIVATE:
return hardwall_activate(info);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
case _HARDWALL_DEACTIVATE:
if (current->thread.hardwall[hwt->index].info != info)
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
return -EINVAL;
return hardwall_deactivate(hwt, current);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
case _HARDWALL_GET_ID:
return info ? info->id : -EINVAL;
arch/tile: more /proc and /sys file support This change introduces a few of the less controversial /proc and /proc/sys interfaces for tile, along with sysfs attributes for various things that were originally proposed as /proc/tile files. It also adjusts the "hardwall" proc API. Arnd Bergmann reviewed the initial arch/tile submission, which included a complete set of all the /proc/tile and /proc/sys/tile knobs that we had added in a somewhat ad hoc way during initial development, and provided feedback on where most of them should go. One knob turned out to be similar enough to the existing /proc/sys/debug/exception-trace that it was re-implemented to use that model instead. Another knob was /proc/tile/grid, which reported the "grid" dimensions of a tile chip (e.g. 8x8 processors = 64-core chip). Arnd suggested looking at sysfs for that, so this change moves that information to a pair of sysfs attributes (chip_width and chip_height) in the /sys/devices/system/cpu directory. We also put the "chip_serial" and "chip_revision" information from our old /proc/tile/board file as attributes in /sys/devices/system/cpu. Other information collected via hypervisor APIs is now placed in /sys/hypervisor. We create a /sys/hypervisor/type file (holding the constant string "tilera") to be parallel with the Xen use of /sys/hypervisor/type holding "xen". We create three top-level files, "version" (the hypervisor's own version), "config_version" (the version of the configuration file), and "hvconfig" (the contents of the configuration file). The remaining information from our old /proc/tile/board and /proc/tile/switch files becomes an attribute group appearing under /sys/hypervisor/board/. Finally, after some feedback from Arnd Bergmann for the previous version of this patch, the /proc/tile/hardwall file is split up into two conceptual parts. First, a directory /proc/tile/hardwall/ which contains one file per active hardwall, each file named after the hardwall's ID and holding a cpulist that says which cpus are enclosed by the hardwall. Second, a /proc/PID file "hardwall" that is either empty (for non-hardwall-using processes) or contains the hardwall ID. Finally, this change pushes the /proc/sys/tile/unaligned_fixup/ directory, with knobs controlling the kernel code for handling the fixup of unaligned exceptions. Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
2011-05-26 23:40:09 +07:00
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
default:
return -EINVAL;
}
}
#ifdef CONFIG_COMPAT
static long hardwall_compat_ioctl(struct file *file,
unsigned int a, unsigned long b)
{
/* Sign-extend the argument so it can be used as a pointer. */
return hardwall_ioctl(file, a, (unsigned long)compat_ptr(b));
}
#endif
/* The user process closed the file; revoke access to user networks. */
static int hardwall_flush(struct file *file, fl_owner_t owner)
{
struct hardwall_info *info = file->private_data;
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
struct task_struct *task, *tmp;
unsigned long flags;
if (info) {
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
/*
* NOTE: if multiple threads are activated on this hardwall
* file, the other threads will continue having access to the
* user network until they are context-switched out and back
* in again.
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
*
* NOTE: A NULL files pointer means the task is being torn
* down, so in that case we also deactivate it.
*/
struct hardwall_type *hwt = info->type;
spin_lock_irqsave(&hwt->lock, flags);
list_for_each_entry_safe(task, tmp, &info->task_head,
thread.hardwall[hwt->index].list) {
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
if (task->files == owner || task->files == NULL)
_hardwall_deactivate(hwt, task);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
spin_unlock_irqrestore(&hwt->lock, flags);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
}
return 0;
}
/* This hardwall is gone, so destroy it. */
static int hardwall_release(struct inode *inode, struct file *file)
{
hardwall_destroy(file->private_data);
return 0;
}
static const struct file_operations dev_hardwall_fops = {
.open = nonseekable_open,
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
.unlocked_ioctl = hardwall_ioctl,
#ifdef CONFIG_COMPAT
.compat_ioctl = hardwall_compat_ioctl,
#endif
.flush = hardwall_flush,
.release = hardwall_release,
};
static struct cdev hardwall_dev;
static int __init dev_hardwall_init(void)
{
int rc;
dev_t dev;
rc = alloc_chrdev_region(&dev, 0, HARDWALL_TYPES, "hardwall");
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
if (rc < 0)
return rc;
cdev_init(&hardwall_dev, &dev_hardwall_fops);
rc = cdev_add(&hardwall_dev, dev, HARDWALL_TYPES);
arch/tile: Add driver to enable access to the user dynamic network. This network (the "UDN") connects all the cpus on the chip in a wormhole-routed dynamic network. Subrectangles of the chip can be allocated by a "create" ioctl on /dev/hardwall, and then to access the UDN in that rectangle, tasks must perform an "activate" ioctl on that same file object after affinitizing themselves to a single cpu in the region. Sending a wormhole-routed message that tries to leave that subrectangle causes all activated tasks to receive a SIGILL (just as they would if they tried to access the UDN without first activating themselves to a hardwall rectangle). The original submission of this code to LKML had the driver instantiated under /proc/tile/hardwall. Now we just use a character device for this, conventionally /dev/hardwall. Some futures planning for the TILE-Gx chip suggests that we may want to have other types of devices that share the general model of "bind a task to a cpu, then 'activate' a file descriptor on a pseudo-device that gives access to some hardware resource". As such, we are using a device rather than, for example, a syscall, to set up and activate this code. As part of this change, the compat_ptr() declaration was fixed and used to pass the compat_ioctl argument to the normal ioctl. So far we limit compat code to 2GB, so the difference between zero-extend and sign-extend (the latter being correct, eventually) had been overlooked. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Acked-by: Arnd Bergmann <arnd@arndb.de>
2010-06-26 04:00:56 +07:00
if (rc < 0)
return rc;
return 0;
}
late_initcall(dev_hardwall_init);