linux_dsm_epyc7002/net/wireless/scan.c

2522 lines
66 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
/*
* cfg80211 scan result handling
*
* Copyright 2008 Johannes Berg <johannes@sipsolutions.net>
* Copyright 2013-2014 Intel Mobile Communications GmbH
* Copyright 2016 Intel Deutschland GmbH
* Copyright (C) 2018-2019 Intel Corporation
*/
#include <linux/kernel.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <linux/nl80211.h>
#include <linux/etherdevice.h>
#include <net/arp.h>
#include <net/cfg80211.h>
#include <net/cfg80211-wext.h>
#include <net/iw_handler.h>
#include "core.h"
#include "nl80211.h"
#include "wext-compat.h"
#include "rdev-ops.h"
/**
* DOC: BSS tree/list structure
*
* At the top level, the BSS list is kept in both a list in each
* registered device (@bss_list) as well as an RB-tree for faster
* lookup. In the RB-tree, entries can be looked up using their
* channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID
* for other BSSes.
*
* Due to the possibility of hidden SSIDs, there's a second level
* structure, the "hidden_list" and "hidden_beacon_bss" pointer.
* The hidden_list connects all BSSes belonging to a single AP
* that has a hidden SSID, and connects beacon and probe response
* entries. For a probe response entry for a hidden SSID, the
* hidden_beacon_bss pointer points to the BSS struct holding the
* beacon's information.
*
* Reference counting is done for all these references except for
* the hidden_list, so that a beacon BSS struct that is otherwise
* not referenced has one reference for being on the bss_list and
* one for each probe response entry that points to it using the
* hidden_beacon_bss pointer. When a BSS struct that has such a
* pointer is get/put, the refcount update is also propagated to
* the referenced struct, this ensure that it cannot get removed
* while somebody is using the probe response version.
*
* Note that the hidden_beacon_bss pointer never changes, due to
* the reference counting. Therefore, no locking is needed for
* it.
*
* Also note that the hidden_beacon_bss pointer is only relevant
* if the driver uses something other than the IEs, e.g. private
* data stored stored in the BSS struct, since the beacon IEs are
* also linked into the probe response struct.
*/
/*
* Limit the number of BSS entries stored in mac80211. Each one is
* a bit over 4k at most, so this limits to roughly 4-5M of memory.
* If somebody wants to really attack this though, they'd likely
* use small beacons, and only one type of frame, limiting each of
* the entries to a much smaller size (in order to generate more
* entries in total, so overhead is bigger.)
*/
static int bss_entries_limit = 1000;
module_param(bss_entries_limit, int, 0644);
MODULE_PARM_DESC(bss_entries_limit,
"limit to number of scan BSS entries (per wiphy, default 1000)");
#define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ)
static void bss_free(struct cfg80211_internal_bss *bss)
{
struct cfg80211_bss_ies *ies;
if (WARN_ON(atomic_read(&bss->hold)))
return;
ies = (void *)rcu_access_pointer(bss->pub.beacon_ies);
if (ies && !bss->pub.hidden_beacon_bss)
kfree_rcu(ies, rcu_head);
ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies);
if (ies)
kfree_rcu(ies, rcu_head);
/*
* This happens when the module is removed, it doesn't
* really matter any more save for completeness
*/
if (!list_empty(&bss->hidden_list))
list_del(&bss->hidden_list);
kfree(bss);
}
static inline void bss_ref_get(struct cfg80211_registered_device *rdev,
struct cfg80211_internal_bss *bss)
{
lockdep_assert_held(&rdev->bss_lock);
bss->refcount++;
if (bss->pub.hidden_beacon_bss) {
bss = container_of(bss->pub.hidden_beacon_bss,
struct cfg80211_internal_bss,
pub);
bss->refcount++;
}
if (bss->pub.transmitted_bss) {
bss = container_of(bss->pub.transmitted_bss,
struct cfg80211_internal_bss,
pub);
bss->refcount++;
}
}
static inline void bss_ref_put(struct cfg80211_registered_device *rdev,
struct cfg80211_internal_bss *bss)
{
lockdep_assert_held(&rdev->bss_lock);
if (bss->pub.hidden_beacon_bss) {
struct cfg80211_internal_bss *hbss;
hbss = container_of(bss->pub.hidden_beacon_bss,
struct cfg80211_internal_bss,
pub);
hbss->refcount--;
if (hbss->refcount == 0)
bss_free(hbss);
}
if (bss->pub.transmitted_bss) {
struct cfg80211_internal_bss *tbss;
tbss = container_of(bss->pub.transmitted_bss,
struct cfg80211_internal_bss,
pub);
tbss->refcount--;
if (tbss->refcount == 0)
bss_free(tbss);
}
bss->refcount--;
if (bss->refcount == 0)
bss_free(bss);
}
static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *rdev,
struct cfg80211_internal_bss *bss)
{
lockdep_assert_held(&rdev->bss_lock);
if (!list_empty(&bss->hidden_list)) {
/*
* don't remove the beacon entry if it has
* probe responses associated with it
*/
if (!bss->pub.hidden_beacon_bss)
return false;
/*
* if it's a probe response entry break its
* link to the other entries in the group
*/
list_del_init(&bss->hidden_list);
}
list_del_init(&bss->list);
list_del_init(&bss->pub.nontrans_list);
rb_erase(&bss->rbn, &rdev->bss_tree);
rdev->bss_entries--;
WARN_ONCE((rdev->bss_entries == 0) ^ list_empty(&rdev->bss_list),
"rdev bss entries[%d]/list[empty:%d] corruption\n",
rdev->bss_entries, list_empty(&rdev->bss_list));
bss_ref_put(rdev, bss);
return true;
}
bool cfg80211_is_element_inherited(const struct element *elem,
const struct element *non_inherit_elem)
{
u8 id_len, ext_id_len, i, loop_len, id;
const u8 *list;
if (elem->id == WLAN_EID_MULTIPLE_BSSID)
return false;
if (!non_inherit_elem || non_inherit_elem->datalen < 2)
return true;
/*
* non inheritance element format is:
* ext ID (56) | IDs list len | list | extension IDs list len | list
* Both lists are optional. Both lengths are mandatory.
* This means valid length is:
* elem_len = 1 (extension ID) + 2 (list len fields) + list lengths
*/
id_len = non_inherit_elem->data[1];
if (non_inherit_elem->datalen < 3 + id_len)
return true;
ext_id_len = non_inherit_elem->data[2 + id_len];
if (non_inherit_elem->datalen < 3 + id_len + ext_id_len)
return true;
if (elem->id == WLAN_EID_EXTENSION) {
if (!ext_id_len)
return true;
loop_len = ext_id_len;
list = &non_inherit_elem->data[3 + id_len];
id = elem->data[0];
} else {
if (!id_len)
return true;
loop_len = id_len;
list = &non_inherit_elem->data[2];
id = elem->id;
}
for (i = 0; i < loop_len; i++) {
if (list[i] == id)
return false;
}
return true;
}
EXPORT_SYMBOL(cfg80211_is_element_inherited);
static size_t cfg80211_gen_new_ie(const u8 *ie, size_t ielen,
const u8 *subelement, size_t subie_len,
u8 *new_ie, gfp_t gfp)
{
u8 *pos, *tmp;
const u8 *tmp_old, *tmp_new;
const struct element *non_inherit_elem;
u8 *sub_copy;
/* copy subelement as we need to change its content to
* mark an ie after it is processed.
*/
sub_copy = kmemdup(subelement, subie_len, gfp);
if (!sub_copy)
return 0;
pos = &new_ie[0];
/* set new ssid */
tmp_new = cfg80211_find_ie(WLAN_EID_SSID, sub_copy, subie_len);
if (tmp_new) {
memcpy(pos, tmp_new, tmp_new[1] + 2);
pos += (tmp_new[1] + 2);
}
/* get non inheritance list if exists */
non_inherit_elem =
cfg80211_find_ext_elem(WLAN_EID_EXT_NON_INHERITANCE,
sub_copy, subie_len);
/* go through IEs in ie (skip SSID) and subelement,
* merge them into new_ie
*/
tmp_old = cfg80211_find_ie(WLAN_EID_SSID, ie, ielen);
tmp_old = (tmp_old) ? tmp_old + tmp_old[1] + 2 : ie;
while (tmp_old + tmp_old[1] + 2 - ie <= ielen) {
if (tmp_old[0] == 0) {
tmp_old++;
continue;
}
if (tmp_old[0] == WLAN_EID_EXTENSION)
tmp = (u8 *)cfg80211_find_ext_ie(tmp_old[2], sub_copy,
subie_len);
else
tmp = (u8 *)cfg80211_find_ie(tmp_old[0], sub_copy,
subie_len);
if (!tmp) {
const struct element *old_elem = (void *)tmp_old;
/* ie in old ie but not in subelement */
if (cfg80211_is_element_inherited(old_elem,
non_inherit_elem)) {
memcpy(pos, tmp_old, tmp_old[1] + 2);
pos += tmp_old[1] + 2;
}
} else {
/* ie in transmitting ie also in subelement,
* copy from subelement and flag the ie in subelement
* as copied (by setting eid field to WLAN_EID_SSID,
* which is skipped anyway).
* For vendor ie, compare OUI + type + subType to
* determine if they are the same ie.
*/
if (tmp_old[0] == WLAN_EID_VENDOR_SPECIFIC) {
if (!memcmp(tmp_old + 2, tmp + 2, 5)) {
/* same vendor ie, copy from
* subelement
*/
memcpy(pos, tmp, tmp[1] + 2);
pos += tmp[1] + 2;
tmp[0] = WLAN_EID_SSID;
} else {
memcpy(pos, tmp_old, tmp_old[1] + 2);
pos += tmp_old[1] + 2;
}
} else {
/* copy ie from subelement into new ie */
memcpy(pos, tmp, tmp[1] + 2);
pos += tmp[1] + 2;
tmp[0] = WLAN_EID_SSID;
}
}
if (tmp_old + tmp_old[1] + 2 - ie == ielen)
break;
tmp_old += tmp_old[1] + 2;
}
/* go through subelement again to check if there is any ie not
* copied to new ie, skip ssid, capability, bssid-index ie
*/
tmp_new = sub_copy;
while (tmp_new + tmp_new[1] + 2 - sub_copy <= subie_len) {
if (!(tmp_new[0] == WLAN_EID_NON_TX_BSSID_CAP ||
tmp_new[0] == WLAN_EID_SSID)) {
memcpy(pos, tmp_new, tmp_new[1] + 2);
pos += tmp_new[1] + 2;
}
if (tmp_new + tmp_new[1] + 2 - sub_copy == subie_len)
break;
tmp_new += tmp_new[1] + 2;
}
kfree(sub_copy);
return pos - new_ie;
}
static bool is_bss(struct cfg80211_bss *a, const u8 *bssid,
const u8 *ssid, size_t ssid_len)
{
const struct cfg80211_bss_ies *ies;
const u8 *ssidie;
if (bssid && !ether_addr_equal(a->bssid, bssid))
return false;
if (!ssid)
return true;
ies = rcu_access_pointer(a->ies);
if (!ies)
return false;
ssidie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len);
if (!ssidie)
return false;
if (ssidie[1] != ssid_len)
return false;
return memcmp(ssidie + 2, ssid, ssid_len) == 0;
}
static int
cfg80211_add_nontrans_list(struct cfg80211_bss *trans_bss,
struct cfg80211_bss *nontrans_bss)
{
const u8 *ssid;
size_t ssid_len;
struct cfg80211_bss *bss = NULL;
rcu_read_lock();
ssid = ieee80211_bss_get_ie(nontrans_bss, WLAN_EID_SSID);
if (!ssid) {
rcu_read_unlock();
return -EINVAL;
}
ssid_len = ssid[1];
ssid = ssid + 2;
rcu_read_unlock();
/* check if nontrans_bss is in the list */
list_for_each_entry(bss, &trans_bss->nontrans_list, nontrans_list) {
if (is_bss(bss, nontrans_bss->bssid, ssid, ssid_len))
return 0;
}
/* add to the list */
list_add_tail(&nontrans_bss->nontrans_list, &trans_bss->nontrans_list);
return 0;
}
static void __cfg80211_bss_expire(struct cfg80211_registered_device *rdev,
unsigned long expire_time)
{
struct cfg80211_internal_bss *bss, *tmp;
bool expired = false;
lockdep_assert_held(&rdev->bss_lock);
list_for_each_entry_safe(bss, tmp, &rdev->bss_list, list) {
if (atomic_read(&bss->hold))
continue;
if (!time_after(expire_time, bss->ts))
continue;
if (__cfg80211_unlink_bss(rdev, bss))
expired = true;
}
if (expired)
rdev->bss_generation++;
}
static bool cfg80211_bss_expire_oldest(struct cfg80211_registered_device *rdev)
{
struct cfg80211_internal_bss *bss, *oldest = NULL;
bool ret;
lockdep_assert_held(&rdev->bss_lock);
list_for_each_entry(bss, &rdev->bss_list, list) {
if (atomic_read(&bss->hold))
continue;
if (!list_empty(&bss->hidden_list) &&
!bss->pub.hidden_beacon_bss)
continue;
if (oldest && time_before(oldest->ts, bss->ts))
continue;
oldest = bss;
}
if (WARN_ON(!oldest))
return false;
/*
* The callers make sure to increase rdev->bss_generation if anything
* gets removed (and a new entry added), so there's no need to also do
* it here.
*/
ret = __cfg80211_unlink_bss(rdev, oldest);
WARN_ON(!ret);
return ret;
}
void ___cfg80211_scan_done(struct cfg80211_registered_device *rdev,
bool send_message)
{
struct cfg80211_scan_request *request;
struct wireless_dev *wdev;
struct sk_buff *msg;
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_RTNL();
if (rdev->scan_msg) {
nl80211_send_scan_msg(rdev, rdev->scan_msg);
rdev->scan_msg = NULL;
return;
}
request = rdev->scan_req;
if (!request)
return;
wdev = request->wdev;
/*
* This must be before sending the other events!
* Otherwise, wpa_supplicant gets completely confused with
* wext events.
*/
if (wdev->netdev)
cfg80211_sme_scan_done(wdev->netdev);
if (!request->info.aborted &&
request->flags & NL80211_SCAN_FLAG_FLUSH) {
/* flush entries from previous scans */
spin_lock_bh(&rdev->bss_lock);
__cfg80211_bss_expire(rdev, request->scan_start);
spin_unlock_bh(&rdev->bss_lock);
}
msg = nl80211_build_scan_msg(rdev, wdev, request->info.aborted);
#ifdef CONFIG_CFG80211_WEXT
if (wdev->netdev && !request->info.aborted) {
memset(&wrqu, 0, sizeof(wrqu));
wireless_send_event(wdev->netdev, SIOCGIWSCAN, &wrqu, NULL);
}
#endif
if (wdev->netdev)
dev_put(wdev->netdev);
rdev->scan_req = NULL;
kfree(request);
if (!send_message)
rdev->scan_msg = msg;
else
nl80211_send_scan_msg(rdev, msg);
}
void __cfg80211_scan_done(struct work_struct *wk)
{
struct cfg80211_registered_device *rdev;
rdev = container_of(wk, struct cfg80211_registered_device,
scan_done_wk);
rtnl_lock();
___cfg80211_scan_done(rdev, true);
rtnl_unlock();
}
void cfg80211_scan_done(struct cfg80211_scan_request *request,
struct cfg80211_scan_info *info)
{
trace_cfg80211_scan_done(request, info);
WARN_ON(request != wiphy_to_rdev(request->wiphy)->scan_req);
request->info = *info;
request->notified = true;
queue_work(cfg80211_wq, &wiphy_to_rdev(request->wiphy)->scan_done_wk);
}
EXPORT_SYMBOL(cfg80211_scan_done);
void cfg80211_add_sched_scan_req(struct cfg80211_registered_device *rdev,
struct cfg80211_sched_scan_request *req)
{
ASSERT_RTNL();
list_add_rcu(&req->list, &rdev->sched_scan_req_list);
}
static void cfg80211_del_sched_scan_req(struct cfg80211_registered_device *rdev,
struct cfg80211_sched_scan_request *req)
{
ASSERT_RTNL();
list_del_rcu(&req->list);
kfree_rcu(req, rcu_head);
}
static struct cfg80211_sched_scan_request *
cfg80211_find_sched_scan_req(struct cfg80211_registered_device *rdev, u64 reqid)
{
struct cfg80211_sched_scan_request *pos;
cfg80211: make cfg80211_sched_scan_results() work from atomic context Drivers should be able to call cfg80211_sched_scan_results() from atomic context. However, with the introduction of multiple scheduled scan feature this requirement was not taken into account resulting in regression shown below. [ 119.021594] BUG: scheduling while atomic: irq/47-iwlwifi/517/0x00000200 [ 119.021604] Modules linked in: [...] [ 119.021759] CPU: 1 PID: 517 Comm: irq/47-iwlwifi Not tainted 4.12.0-rc2-t440s-20170522+ #1 [ 119.021763] Hardware name: LENOVO 20AQS03H00/20AQS03H00, BIOS GJET91WW (2.41 ) 09/21/2016 [ 119.021766] Call Trace: [ 119.021778] ? dump_stack+0x5c/0x84 [ 119.021784] ? __schedule_bug+0x4c/0x70 [ 119.021792] ? __schedule+0x496/0x5c0 [ 119.021798] ? schedule+0x2d/0x80 [ 119.021804] ? schedule_preempt_disabled+0x5/0x10 [ 119.021810] ? __mutex_lock.isra.0+0x18e/0x4c0 [ 119.021817] ? __wake_up+0x2f/0x50 [ 119.021833] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021844] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021859] ? iwl_mvm_rx_lmac_scan_iter_complete_notif+0x17/0x30 [iwlmvm] [ 119.021869] ? iwl_pcie_rx_handle+0x2a9/0x7e0 [iwlwifi] [ 119.021878] ? iwl_pcie_irq_handler+0x17c/0x730 [iwlwifi] [ 119.021884] ? irq_forced_thread_fn+0x60/0x60 [ 119.021887] ? irq_thread_fn+0x16/0x40 [ 119.021892] ? irq_thread+0x109/0x180 [ 119.021896] ? wake_threads_waitq+0x30/0x30 [ 119.021901] ? kthread+0xf2/0x130 [ 119.021905] ? irq_thread_dtor+0x90/0x90 [ 119.021910] ? kthread_create_on_node+0x40/0x40 [ 119.021915] ? ret_from_fork+0x26/0x40 Fixes: b34939b98369 ("cfg80211: add request id to cfg80211_sched_scan_*() api") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-23 15:58:07 +07:00
WARN_ON_ONCE(!rcu_read_lock_held() && !lockdep_rtnl_is_held());
cfg80211: make cfg80211_sched_scan_results() work from atomic context Drivers should be able to call cfg80211_sched_scan_results() from atomic context. However, with the introduction of multiple scheduled scan feature this requirement was not taken into account resulting in regression shown below. [ 119.021594] BUG: scheduling while atomic: irq/47-iwlwifi/517/0x00000200 [ 119.021604] Modules linked in: [...] [ 119.021759] CPU: 1 PID: 517 Comm: irq/47-iwlwifi Not tainted 4.12.0-rc2-t440s-20170522+ #1 [ 119.021763] Hardware name: LENOVO 20AQS03H00/20AQS03H00, BIOS GJET91WW (2.41 ) 09/21/2016 [ 119.021766] Call Trace: [ 119.021778] ? dump_stack+0x5c/0x84 [ 119.021784] ? __schedule_bug+0x4c/0x70 [ 119.021792] ? __schedule+0x496/0x5c0 [ 119.021798] ? schedule+0x2d/0x80 [ 119.021804] ? schedule_preempt_disabled+0x5/0x10 [ 119.021810] ? __mutex_lock.isra.0+0x18e/0x4c0 [ 119.021817] ? __wake_up+0x2f/0x50 [ 119.021833] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021844] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021859] ? iwl_mvm_rx_lmac_scan_iter_complete_notif+0x17/0x30 [iwlmvm] [ 119.021869] ? iwl_pcie_rx_handle+0x2a9/0x7e0 [iwlwifi] [ 119.021878] ? iwl_pcie_irq_handler+0x17c/0x730 [iwlwifi] [ 119.021884] ? irq_forced_thread_fn+0x60/0x60 [ 119.021887] ? irq_thread_fn+0x16/0x40 [ 119.021892] ? irq_thread+0x109/0x180 [ 119.021896] ? wake_threads_waitq+0x30/0x30 [ 119.021901] ? kthread+0xf2/0x130 [ 119.021905] ? irq_thread_dtor+0x90/0x90 [ 119.021910] ? kthread_create_on_node+0x40/0x40 [ 119.021915] ? ret_from_fork+0x26/0x40 Fixes: b34939b98369 ("cfg80211: add request id to cfg80211_sched_scan_*() api") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-23 15:58:07 +07:00
list_for_each_entry_rcu(pos, &rdev->sched_scan_req_list, list) {
if (pos->reqid == reqid)
return pos;
}
return NULL;
}
/*
* Determines if a scheduled scan request can be handled. When a legacy
* scheduled scan is running no other scheduled scan is allowed regardless
* whether the request is for legacy or multi-support scan. When a multi-support
* scheduled scan is running a request for legacy scan is not allowed. In this
* case a request for multi-support scan can be handled if resources are
* available, ie. struct wiphy::max_sched_scan_reqs limit is not yet reached.
*/
int cfg80211_sched_scan_req_possible(struct cfg80211_registered_device *rdev,
bool want_multi)
{
struct cfg80211_sched_scan_request *pos;
int i = 0;
list_for_each_entry(pos, &rdev->sched_scan_req_list, list) {
/* request id zero means legacy in progress */
if (!i && !pos->reqid)
return -EINPROGRESS;
i++;
}
if (i) {
/* no legacy allowed when multi request(s) are active */
if (!want_multi)
return -EINPROGRESS;
/* resource limit reached */
if (i == rdev->wiphy.max_sched_scan_reqs)
return -ENOSPC;
}
return 0;
}
void cfg80211_sched_scan_results_wk(struct work_struct *work)
{
struct cfg80211_registered_device *rdev;
struct cfg80211_sched_scan_request *req, *tmp;
rdev = container_of(work, struct cfg80211_registered_device,
sched_scan_res_wk);
rtnl_lock();
list_for_each_entry_safe(req, tmp, &rdev->sched_scan_req_list, list) {
if (req->report_results) {
req->report_results = false;
if (req->flags & NL80211_SCAN_FLAG_FLUSH) {
/* flush entries from previous scans */
spin_lock_bh(&rdev->bss_lock);
__cfg80211_bss_expire(rdev, req->scan_start);
spin_unlock_bh(&rdev->bss_lock);
req->scan_start = jiffies;
}
nl80211_send_sched_scan(req,
NL80211_CMD_SCHED_SCAN_RESULTS);
}
}
rtnl_unlock();
}
void cfg80211_sched_scan_results(struct wiphy *wiphy, u64 reqid)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_sched_scan_request *request;
trace_cfg80211_sched_scan_results(wiphy, reqid);
/* ignore if we're not scanning */
cfg80211: make cfg80211_sched_scan_results() work from atomic context Drivers should be able to call cfg80211_sched_scan_results() from atomic context. However, with the introduction of multiple scheduled scan feature this requirement was not taken into account resulting in regression shown below. [ 119.021594] BUG: scheduling while atomic: irq/47-iwlwifi/517/0x00000200 [ 119.021604] Modules linked in: [...] [ 119.021759] CPU: 1 PID: 517 Comm: irq/47-iwlwifi Not tainted 4.12.0-rc2-t440s-20170522+ #1 [ 119.021763] Hardware name: LENOVO 20AQS03H00/20AQS03H00, BIOS GJET91WW (2.41 ) 09/21/2016 [ 119.021766] Call Trace: [ 119.021778] ? dump_stack+0x5c/0x84 [ 119.021784] ? __schedule_bug+0x4c/0x70 [ 119.021792] ? __schedule+0x496/0x5c0 [ 119.021798] ? schedule+0x2d/0x80 [ 119.021804] ? schedule_preempt_disabled+0x5/0x10 [ 119.021810] ? __mutex_lock.isra.0+0x18e/0x4c0 [ 119.021817] ? __wake_up+0x2f/0x50 [ 119.021833] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021844] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021859] ? iwl_mvm_rx_lmac_scan_iter_complete_notif+0x17/0x30 [iwlmvm] [ 119.021869] ? iwl_pcie_rx_handle+0x2a9/0x7e0 [iwlwifi] [ 119.021878] ? iwl_pcie_irq_handler+0x17c/0x730 [iwlwifi] [ 119.021884] ? irq_forced_thread_fn+0x60/0x60 [ 119.021887] ? irq_thread_fn+0x16/0x40 [ 119.021892] ? irq_thread+0x109/0x180 [ 119.021896] ? wake_threads_waitq+0x30/0x30 [ 119.021901] ? kthread+0xf2/0x130 [ 119.021905] ? irq_thread_dtor+0x90/0x90 [ 119.021910] ? kthread_create_on_node+0x40/0x40 [ 119.021915] ? ret_from_fork+0x26/0x40 Fixes: b34939b98369 ("cfg80211: add request id to cfg80211_sched_scan_*() api") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-23 15:58:07 +07:00
rcu_read_lock();
request = cfg80211_find_sched_scan_req(rdev, reqid);
if (request) {
request->report_results = true;
queue_work(cfg80211_wq, &rdev->sched_scan_res_wk);
}
cfg80211: make cfg80211_sched_scan_results() work from atomic context Drivers should be able to call cfg80211_sched_scan_results() from atomic context. However, with the introduction of multiple scheduled scan feature this requirement was not taken into account resulting in regression shown below. [ 119.021594] BUG: scheduling while atomic: irq/47-iwlwifi/517/0x00000200 [ 119.021604] Modules linked in: [...] [ 119.021759] CPU: 1 PID: 517 Comm: irq/47-iwlwifi Not tainted 4.12.0-rc2-t440s-20170522+ #1 [ 119.021763] Hardware name: LENOVO 20AQS03H00/20AQS03H00, BIOS GJET91WW (2.41 ) 09/21/2016 [ 119.021766] Call Trace: [ 119.021778] ? dump_stack+0x5c/0x84 [ 119.021784] ? __schedule_bug+0x4c/0x70 [ 119.021792] ? __schedule+0x496/0x5c0 [ 119.021798] ? schedule+0x2d/0x80 [ 119.021804] ? schedule_preempt_disabled+0x5/0x10 [ 119.021810] ? __mutex_lock.isra.0+0x18e/0x4c0 [ 119.021817] ? __wake_up+0x2f/0x50 [ 119.021833] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021844] ? cfg80211_sched_scan_results+0x19/0x60 [cfg80211] [ 119.021859] ? iwl_mvm_rx_lmac_scan_iter_complete_notif+0x17/0x30 [iwlmvm] [ 119.021869] ? iwl_pcie_rx_handle+0x2a9/0x7e0 [iwlwifi] [ 119.021878] ? iwl_pcie_irq_handler+0x17c/0x730 [iwlwifi] [ 119.021884] ? irq_forced_thread_fn+0x60/0x60 [ 119.021887] ? irq_thread_fn+0x16/0x40 [ 119.021892] ? irq_thread+0x109/0x180 [ 119.021896] ? wake_threads_waitq+0x30/0x30 [ 119.021901] ? kthread+0xf2/0x130 [ 119.021905] ? irq_thread_dtor+0x90/0x90 [ 119.021910] ? kthread_create_on_node+0x40/0x40 [ 119.021915] ? ret_from_fork+0x26/0x40 Fixes: b34939b98369 ("cfg80211: add request id to cfg80211_sched_scan_*() api") Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-05-23 15:58:07 +07:00
rcu_read_unlock();
}
EXPORT_SYMBOL(cfg80211_sched_scan_results);
void cfg80211_sched_scan_stopped_rtnl(struct wiphy *wiphy, u64 reqid)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
ASSERT_RTNL();
trace_cfg80211_sched_scan_stopped(wiphy, reqid);
__cfg80211_stop_sched_scan(rdev, reqid, true);
}
EXPORT_SYMBOL(cfg80211_sched_scan_stopped_rtnl);
void cfg80211_sched_scan_stopped(struct wiphy *wiphy, u64 reqid)
{
rtnl_lock();
cfg80211_sched_scan_stopped_rtnl(wiphy, reqid);
rtnl_unlock();
}
EXPORT_SYMBOL(cfg80211_sched_scan_stopped);
int cfg80211_stop_sched_scan_req(struct cfg80211_registered_device *rdev,
struct cfg80211_sched_scan_request *req,
bool driver_initiated)
{
ASSERT_RTNL();
if (!driver_initiated) {
int err = rdev_sched_scan_stop(rdev, req->dev, req->reqid);
if (err)
return err;
}
nl80211_send_sched_scan(req, NL80211_CMD_SCHED_SCAN_STOPPED);
cfg80211_del_sched_scan_req(rdev, req);
return 0;
}
int __cfg80211_stop_sched_scan(struct cfg80211_registered_device *rdev,
u64 reqid, bool driver_initiated)
{
struct cfg80211_sched_scan_request *sched_scan_req;
ASSERT_RTNL();
sched_scan_req = cfg80211_find_sched_scan_req(rdev, reqid);
if (!sched_scan_req)
return -ENOENT;
return cfg80211_stop_sched_scan_req(rdev, sched_scan_req,
driver_initiated);
}
void cfg80211_bss_age(struct cfg80211_registered_device *rdev,
unsigned long age_secs)
{
struct cfg80211_internal_bss *bss;
unsigned long age_jiffies = msecs_to_jiffies(age_secs * MSEC_PER_SEC);
spin_lock_bh(&rdev->bss_lock);
list_for_each_entry(bss, &rdev->bss_list, list)
bss->ts -= age_jiffies;
spin_unlock_bh(&rdev->bss_lock);
}
void cfg80211_bss_expire(struct cfg80211_registered_device *rdev)
{
__cfg80211_bss_expire(rdev, jiffies - IEEE80211_SCAN_RESULT_EXPIRE);
}
const struct element *
cfg80211_find_elem_match(u8 eid, const u8 *ies, unsigned int len,
const u8 *match, unsigned int match_len,
unsigned int match_offset)
{
const struct element *elem;
for_each_element_id(elem, eid, ies, len) {
if (elem->datalen >= match_offset + match_len &&
!memcmp(elem->data + match_offset, match, match_len))
return elem;
}
return NULL;
}
EXPORT_SYMBOL(cfg80211_find_elem_match);
const struct element *cfg80211_find_vendor_elem(unsigned int oui, int oui_type,
const u8 *ies,
unsigned int len)
{
const struct element *elem;
u8 match[] = { oui >> 16, oui >> 8, oui, oui_type };
int match_len = (oui_type < 0) ? 3 : sizeof(match);
if (WARN_ON(oui_type > 0xff))
return NULL;
elem = cfg80211_find_elem_match(WLAN_EID_VENDOR_SPECIFIC, ies, len,
match, match_len, 0);
if (!elem || elem->datalen < 4)
return NULL;
return elem;
}
EXPORT_SYMBOL(cfg80211_find_vendor_elem);
/**
* enum bss_compare_mode - BSS compare mode
* @BSS_CMP_REGULAR: regular compare mode (for insertion and normal find)
* @BSS_CMP_HIDE_ZLEN: find hidden SSID with zero-length mode
* @BSS_CMP_HIDE_NUL: find hidden SSID with NUL-ed out mode
*/
enum bss_compare_mode {
BSS_CMP_REGULAR,
BSS_CMP_HIDE_ZLEN,
BSS_CMP_HIDE_NUL,
};
static int cmp_bss(struct cfg80211_bss *a,
struct cfg80211_bss *b,
enum bss_compare_mode mode)
{
const struct cfg80211_bss_ies *a_ies, *b_ies;
const u8 *ie1 = NULL;
const u8 *ie2 = NULL;
int i, r;
if (a->channel != b->channel)
return b->channel->center_freq - a->channel->center_freq;
a_ies = rcu_access_pointer(a->ies);
if (!a_ies)
return -1;
b_ies = rcu_access_pointer(b->ies);
if (!b_ies)
return 1;
if (WLAN_CAPABILITY_IS_STA_BSS(a->capability))
ie1 = cfg80211_find_ie(WLAN_EID_MESH_ID,
a_ies->data, a_ies->len);
if (WLAN_CAPABILITY_IS_STA_BSS(b->capability))
ie2 = cfg80211_find_ie(WLAN_EID_MESH_ID,
b_ies->data, b_ies->len);
if (ie1 && ie2) {
int mesh_id_cmp;
if (ie1[1] == ie2[1])
mesh_id_cmp = memcmp(ie1 + 2, ie2 + 2, ie1[1]);
else
mesh_id_cmp = ie2[1] - ie1[1];
ie1 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
a_ies->data, a_ies->len);
ie2 = cfg80211_find_ie(WLAN_EID_MESH_CONFIG,
b_ies->data, b_ies->len);
if (ie1 && ie2) {
if (mesh_id_cmp)
return mesh_id_cmp;
if (ie1[1] != ie2[1])
return ie2[1] - ie1[1];
return memcmp(ie1 + 2, ie2 + 2, ie1[1]);
}
}
r = memcmp(a->bssid, b->bssid, sizeof(a->bssid));
if (r)
return r;
ie1 = cfg80211_find_ie(WLAN_EID_SSID, a_ies->data, a_ies->len);
ie2 = cfg80211_find_ie(WLAN_EID_SSID, b_ies->data, b_ies->len);
if (!ie1 && !ie2)
return 0;
/*
* Note that with "hide_ssid", the function returns a match if
* the already-present BSS ("b") is a hidden SSID beacon for
* the new BSS ("a").
*/
/* sort missing IE before (left of) present IE */
if (!ie1)
return -1;
if (!ie2)
return 1;
switch (mode) {
case BSS_CMP_HIDE_ZLEN:
/*
* In ZLEN mode we assume the BSS entry we're
* looking for has a zero-length SSID. So if
* the one we're looking at right now has that,
* return 0. Otherwise, return the difference
* in length, but since we're looking for the
* 0-length it's really equivalent to returning
* the length of the one we're looking at.
*
* No content comparison is needed as we assume
* the content length is zero.
*/
return ie2[1];
case BSS_CMP_REGULAR:
default:
/* sort by length first, then by contents */
if (ie1[1] != ie2[1])
return ie2[1] - ie1[1];
return memcmp(ie1 + 2, ie2 + 2, ie1[1]);
case BSS_CMP_HIDE_NUL:
if (ie1[1] != ie2[1])
return ie2[1] - ie1[1];
/* this is equivalent to memcmp(zeroes, ie2 + 2, len) */
for (i = 0; i < ie2[1]; i++)
if (ie2[i + 2])
return -1;
return 0;
}
}
static bool cfg80211_bss_type_match(u16 capability,
enum nl80211_band band,
enum ieee80211_bss_type bss_type)
{
bool ret = true;
u16 mask, val;
if (bss_type == IEEE80211_BSS_TYPE_ANY)
return ret;
if (band == NL80211_BAND_60GHZ) {
mask = WLAN_CAPABILITY_DMG_TYPE_MASK;
switch (bss_type) {
case IEEE80211_BSS_TYPE_ESS:
val = WLAN_CAPABILITY_DMG_TYPE_AP;
break;
case IEEE80211_BSS_TYPE_PBSS:
val = WLAN_CAPABILITY_DMG_TYPE_PBSS;
break;
case IEEE80211_BSS_TYPE_IBSS:
val = WLAN_CAPABILITY_DMG_TYPE_IBSS;
break;
default:
return false;
}
} else {
mask = WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS;
switch (bss_type) {
case IEEE80211_BSS_TYPE_ESS:
val = WLAN_CAPABILITY_ESS;
break;
case IEEE80211_BSS_TYPE_IBSS:
val = WLAN_CAPABILITY_IBSS;
break;
case IEEE80211_BSS_TYPE_MBSS:
val = 0;
break;
default:
return false;
}
}
ret = ((capability & mask) == val);
return ret;
}
/* Returned bss is reference counted and must be cleaned up appropriately. */
struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy,
struct ieee80211_channel *channel,
const u8 *bssid,
const u8 *ssid, size_t ssid_len,
enum ieee80211_bss_type bss_type,
enum ieee80211_privacy privacy)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_internal_bss *bss, *res = NULL;
unsigned long now = jiffies;
int bss_privacy;
trace_cfg80211_get_bss(wiphy, channel, bssid, ssid, ssid_len, bss_type,
privacy);
spin_lock_bh(&rdev->bss_lock);
list_for_each_entry(bss, &rdev->bss_list, list) {
if (!cfg80211_bss_type_match(bss->pub.capability,
bss->pub.channel->band, bss_type))
continue;
bss_privacy = (bss->pub.capability & WLAN_CAPABILITY_PRIVACY);
if ((privacy == IEEE80211_PRIVACY_ON && !bss_privacy) ||
(privacy == IEEE80211_PRIVACY_OFF && bss_privacy))
continue;
if (channel && bss->pub.channel != channel)
continue;
if (!is_valid_ether_addr(bss->pub.bssid))
continue;
/* Don't get expired BSS structs */
if (time_after(now, bss->ts + IEEE80211_SCAN_RESULT_EXPIRE) &&
!atomic_read(&bss->hold))
continue;
if (is_bss(&bss->pub, bssid, ssid, ssid_len)) {
res = bss;
bss_ref_get(rdev, res);
break;
}
}
spin_unlock_bh(&rdev->bss_lock);
if (!res)
return NULL;
trace_cfg80211_return_bss(&res->pub);
return &res->pub;
}
EXPORT_SYMBOL(cfg80211_get_bss);
static void rb_insert_bss(struct cfg80211_registered_device *rdev,
struct cfg80211_internal_bss *bss)
{
struct rb_node **p = &rdev->bss_tree.rb_node;
struct rb_node *parent = NULL;
struct cfg80211_internal_bss *tbss;
int cmp;
while (*p) {
parent = *p;
tbss = rb_entry(parent, struct cfg80211_internal_bss, rbn);
cmp = cmp_bss(&bss->pub, &tbss->pub, BSS_CMP_REGULAR);
if (WARN_ON(!cmp)) {
/* will sort of leak this BSS */
return;
}
if (cmp < 0)
p = &(*p)->rb_left;
else
p = &(*p)->rb_right;
}
rb_link_node(&bss->rbn, parent, p);
rb_insert_color(&bss->rbn, &rdev->bss_tree);
}
static struct cfg80211_internal_bss *
rb_find_bss(struct cfg80211_registered_device *rdev,
struct cfg80211_internal_bss *res,
enum bss_compare_mode mode)
{
struct rb_node *n = rdev->bss_tree.rb_node;
struct cfg80211_internal_bss *bss;
int r;
while (n) {
bss = rb_entry(n, struct cfg80211_internal_bss, rbn);
r = cmp_bss(&res->pub, &bss->pub, mode);
if (r == 0)
return bss;
else if (r < 0)
n = n->rb_left;
else
n = n->rb_right;
}
return NULL;
}
static bool cfg80211_combine_bsses(struct cfg80211_registered_device *rdev,
struct cfg80211_internal_bss *new)
{
const struct cfg80211_bss_ies *ies;
struct cfg80211_internal_bss *bss;
const u8 *ie;
int i, ssidlen;
u8 fold = 0;
u32 n_entries = 0;
ies = rcu_access_pointer(new->pub.beacon_ies);
if (WARN_ON(!ies))
return false;
ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len);
if (!ie) {
/* nothing to do */
return true;
}
ssidlen = ie[1];
for (i = 0; i < ssidlen; i++)
fold |= ie[2 + i];
if (fold) {
/* not a hidden SSID */
return true;
}
/* This is the bad part ... */
list_for_each_entry(bss, &rdev->bss_list, list) {
/*
* we're iterating all the entries anyway, so take the
* opportunity to validate the list length accounting
*/
n_entries++;
if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid))
continue;
if (bss->pub.channel != new->pub.channel)
continue;
if (bss->pub.scan_width != new->pub.scan_width)
continue;
if (rcu_access_pointer(bss->pub.beacon_ies))
continue;
ies = rcu_access_pointer(bss->pub.ies);
if (!ies)
continue;
ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len);
if (!ie)
continue;
if (ssidlen && ie[1] != ssidlen)
continue;
if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss))
continue;
if (WARN_ON_ONCE(!list_empty(&bss->hidden_list)))
list_del(&bss->hidden_list);
/* combine them */
list_add(&bss->hidden_list, &new->hidden_list);
bss->pub.hidden_beacon_bss = &new->pub;
new->refcount += bss->refcount;
rcu_assign_pointer(bss->pub.beacon_ies,
new->pub.beacon_ies);
}
WARN_ONCE(n_entries != rdev->bss_entries,
"rdev bss entries[%d]/list[len:%d] corruption\n",
rdev->bss_entries, n_entries);
return true;
}
struct cfg80211_non_tx_bss {
struct cfg80211_bss *tx_bss;
u8 max_bssid_indicator;
u8 bssid_index;
};
/* Returned bss is reference counted and must be cleaned up appropriately. */
struct cfg80211_internal_bss *
cfg80211_bss_update(struct cfg80211_registered_device *rdev,
struct cfg80211_internal_bss *tmp,
bool signal_valid, unsigned long ts)
{
struct cfg80211_internal_bss *found = NULL;
if (WARN_ON(!tmp->pub.channel))
return NULL;
tmp->ts = ts;
spin_lock_bh(&rdev->bss_lock);
if (WARN_ON(!rcu_access_pointer(tmp->pub.ies))) {
spin_unlock_bh(&rdev->bss_lock);
return NULL;
}
found = rb_find_bss(rdev, tmp, BSS_CMP_REGULAR);
if (found) {
/* Update IEs */
if (rcu_access_pointer(tmp->pub.proberesp_ies)) {
const struct cfg80211_bss_ies *old;
old = rcu_access_pointer(found->pub.proberesp_ies);
rcu_assign_pointer(found->pub.proberesp_ies,
tmp->pub.proberesp_ies);
/* Override possible earlier Beacon frame IEs */
rcu_assign_pointer(found->pub.ies,
tmp->pub.proberesp_ies);
if (old)
kfree_rcu((struct cfg80211_bss_ies *)old,
rcu_head);
} else if (rcu_access_pointer(tmp->pub.beacon_ies)) {
const struct cfg80211_bss_ies *old;
struct cfg80211_internal_bss *bss;
if (found->pub.hidden_beacon_bss &&
!list_empty(&found->hidden_list)) {
const struct cfg80211_bss_ies *f;
/*
* The found BSS struct is one of the probe
* response members of a group, but we're
* receiving a beacon (beacon_ies in the tmp
* bss is used). This can only mean that the
* AP changed its beacon from not having an
* SSID to showing it, which is confusing so
* drop this information.
*/
f = rcu_access_pointer(tmp->pub.beacon_ies);
kfree_rcu((struct cfg80211_bss_ies *)f,
rcu_head);
goto drop;
}
old = rcu_access_pointer(found->pub.beacon_ies);
rcu_assign_pointer(found->pub.beacon_ies,
tmp->pub.beacon_ies);
/* Override IEs if they were from a beacon before */
if (old == rcu_access_pointer(found->pub.ies))
rcu_assign_pointer(found->pub.ies,
tmp->pub.beacon_ies);
/* Assign beacon IEs to all sub entries */
list_for_each_entry(bss, &found->hidden_list,
hidden_list) {
const struct cfg80211_bss_ies *ies;
ies = rcu_access_pointer(bss->pub.beacon_ies);
WARN_ON(ies != old);
rcu_assign_pointer(bss->pub.beacon_ies,
tmp->pub.beacon_ies);
}
if (old)
kfree_rcu((struct cfg80211_bss_ies *)old,
rcu_head);
}
found->pub.beacon_interval = tmp->pub.beacon_interval;
/*
* don't update the signal if beacon was heard on
* adjacent channel.
*/
if (signal_valid)
found->pub.signal = tmp->pub.signal;
found->pub.capability = tmp->pub.capability;
found->ts = tmp->ts;
found->ts_boottime = tmp->ts_boottime;
found->parent_tsf = tmp->parent_tsf;
found->pub.chains = tmp->pub.chains;
memcpy(found->pub.chain_signal, tmp->pub.chain_signal,
IEEE80211_MAX_CHAINS);
ether_addr_copy(found->parent_bssid, tmp->parent_bssid);
found->pub.max_bssid_indicator = tmp->pub.max_bssid_indicator;
found->pub.bssid_index = tmp->pub.bssid_index;
} else {
struct cfg80211_internal_bss *new;
struct cfg80211_internal_bss *hidden;
struct cfg80211_bss_ies *ies;
/*
* create a copy -- the "res" variable that is passed in
* is allocated on the stack since it's not needed in the
* more common case of an update
*/
new = kzalloc(sizeof(*new) + rdev->wiphy.bss_priv_size,
GFP_ATOMIC);
if (!new) {
ies = (void *)rcu_dereference(tmp->pub.beacon_ies);
if (ies)
kfree_rcu(ies, rcu_head);
ies = (void *)rcu_dereference(tmp->pub.proberesp_ies);
if (ies)
kfree_rcu(ies, rcu_head);
goto drop;
}
memcpy(new, tmp, sizeof(*new));
new->refcount = 1;
INIT_LIST_HEAD(&new->hidden_list);
INIT_LIST_HEAD(&new->pub.nontrans_list);
if (rcu_access_pointer(tmp->pub.proberesp_ies)) {
hidden = rb_find_bss(rdev, tmp, BSS_CMP_HIDE_ZLEN);
if (!hidden)
hidden = rb_find_bss(rdev, tmp,
BSS_CMP_HIDE_NUL);
if (hidden) {
new->pub.hidden_beacon_bss = &hidden->pub;
list_add(&new->hidden_list,
&hidden->hidden_list);
hidden->refcount++;
rcu_assign_pointer(new->pub.beacon_ies,
hidden->pub.beacon_ies);
}
} else {
/*
* Ok so we found a beacon, and don't have an entry. If
* it's a beacon with hidden SSID, we might be in for an
* expensive search for any probe responses that should
* be grouped with this beacon for updates ...
*/
if (!cfg80211_combine_bsses(rdev, new)) {
kfree(new);
goto drop;
}
}
if (rdev->bss_entries >= bss_entries_limit &&
!cfg80211_bss_expire_oldest(rdev)) {
kfree(new);
goto drop;
}
/* This must be before the call to bss_ref_get */
if (tmp->pub.transmitted_bss) {
struct cfg80211_internal_bss *pbss =
container_of(tmp->pub.transmitted_bss,
struct cfg80211_internal_bss,
pub);
new->pub.transmitted_bss = tmp->pub.transmitted_bss;
bss_ref_get(rdev, pbss);
}
list_add_tail(&new->list, &rdev->bss_list);
rdev->bss_entries++;
rb_insert_bss(rdev, new);
found = new;
}
rdev->bss_generation++;
bss_ref_get(rdev, found);
spin_unlock_bh(&rdev->bss_lock);
return found;
drop:
spin_unlock_bh(&rdev->bss_lock);
return NULL;
}
/*
* Update RX channel information based on the available frame payload
* information. This is mainly for the 2.4 GHz band where frames can be received
* from neighboring channels and the Beacon frames use the DSSS Parameter Set
* element to indicate the current (transmitting) channel, but this might also
* be needed on other bands if RX frequency does not match with the actual
* operating channel of a BSS.
*/
static struct ieee80211_channel *
cfg80211_get_bss_channel(struct wiphy *wiphy, const u8 *ie, size_t ielen,
struct ieee80211_channel *channel,
enum nl80211_bss_scan_width scan_width)
{
const u8 *tmp;
u32 freq;
int channel_number = -1;
struct ieee80211_channel *alt_channel;
tmp = cfg80211_find_ie(WLAN_EID_DS_PARAMS, ie, ielen);
if (tmp && tmp[1] == 1) {
channel_number = tmp[2];
} else {
tmp = cfg80211_find_ie(WLAN_EID_HT_OPERATION, ie, ielen);
if (tmp && tmp[1] >= sizeof(struct ieee80211_ht_operation)) {
struct ieee80211_ht_operation *htop = (void *)(tmp + 2);
channel_number = htop->primary_chan;
}
}
if (channel_number < 0) {
/* No channel information in frame payload */
return channel;
}
freq = ieee80211_channel_to_frequency(channel_number, channel->band);
alt_channel = ieee80211_get_channel(wiphy, freq);
if (!alt_channel) {
if (channel->band == NL80211_BAND_2GHZ) {
/*
* Better not allow unexpected channels when that could
* be going beyond the 1-11 range (e.g., discovering
* BSS on channel 12 when radio is configured for
* channel 11.
*/
return NULL;
}
/* No match for the payload channel number - ignore it */
return channel;
}
if (scan_width == NL80211_BSS_CHAN_WIDTH_10 ||
scan_width == NL80211_BSS_CHAN_WIDTH_5) {
/*
* Ignore channel number in 5 and 10 MHz channels where there
* may not be an n:1 or 1:n mapping between frequencies and
* channel numbers.
*/
return channel;
}
/*
* Use the channel determined through the payload channel number
* instead of the RX channel reported by the driver.
*/
if (alt_channel->flags & IEEE80211_CHAN_DISABLED)
return NULL;
return alt_channel;
}
/* Returned bss is reference counted and must be cleaned up appropriately. */
static struct cfg80211_bss *
cfg80211_inform_single_bss_data(struct wiphy *wiphy,
struct cfg80211_inform_bss *data,
enum cfg80211_bss_frame_type ftype,
const u8 *bssid, u64 tsf, u16 capability,
u16 beacon_interval, const u8 *ie, size_t ielen,
struct cfg80211_non_tx_bss *non_tx_data,
gfp_t gfp)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_bss_ies *ies;
struct ieee80211_channel *channel;
struct cfg80211_internal_bss tmp = {}, *res;
int bss_type;
bool signal_valid;
if (WARN_ON(!wiphy))
return NULL;
if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC &&
(data->signal < 0 || data->signal > 100)))
return NULL;
channel = cfg80211_get_bss_channel(wiphy, ie, ielen, data->chan,
data->scan_width);
if (!channel)
return NULL;
memcpy(tmp.pub.bssid, bssid, ETH_ALEN);
tmp.pub.channel = channel;
tmp.pub.scan_width = data->scan_width;
tmp.pub.signal = data->signal;
tmp.pub.beacon_interval = beacon_interval;
tmp.pub.capability = capability;
tmp.ts_boottime = data->boottime_ns;
if (non_tx_data) {
tmp.pub.transmitted_bss = non_tx_data->tx_bss;
tmp.pub.bssid_index = non_tx_data->bssid_index;
tmp.pub.max_bssid_indicator = non_tx_data->max_bssid_indicator;
}
/*
* If we do not know here whether the IEs are from a Beacon or Probe
* Response frame, we need to pick one of the options and only use it
* with the driver that does not provide the full Beacon/Probe Response
* frame. Use Beacon frame pointer to avoid indicating that this should
* override the IEs pointer should we have received an earlier
* indication of Probe Response data.
*/
ies = kzalloc(sizeof(*ies) + ielen, gfp);
if (!ies)
return NULL;
ies->len = ielen;
ies->tsf = tsf;
ies->from_beacon = false;
memcpy(ies->data, ie, ielen);
switch (ftype) {
case CFG80211_BSS_FTYPE_BEACON:
ies->from_beacon = true;
/* fall through */
case CFG80211_BSS_FTYPE_UNKNOWN:
rcu_assign_pointer(tmp.pub.beacon_ies, ies);
break;
case CFG80211_BSS_FTYPE_PRESP:
rcu_assign_pointer(tmp.pub.proberesp_ies, ies);
break;
}
rcu_assign_pointer(tmp.pub.ies, ies);
signal_valid = abs(data->chan->center_freq - channel->center_freq) <=
wiphy->max_adj_channel_rssi_comp;
res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid,
jiffies);
if (!res)
return NULL;
if (channel->band == NL80211_BAND_60GHZ) {
bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK;
if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP ||
bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS)
regulatory_hint_found_beacon(wiphy, channel, gfp);
} else {
if (res->pub.capability & WLAN_CAPABILITY_ESS)
regulatory_hint_found_beacon(wiphy, channel, gfp);
}
if (non_tx_data && non_tx_data->tx_bss) {
/* this is a nontransmitting bss, we need to add it to
* transmitting bss' list if it is not there
*/
if (cfg80211_add_nontrans_list(non_tx_data->tx_bss,
&res->pub)) {
if (__cfg80211_unlink_bss(rdev, res))
rdev->bss_generation++;
}
}
trace_cfg80211_return_bss(&res->pub);
/* cfg80211_bss_update gives us a referenced result */
return &res->pub;
}
static const struct element
*cfg80211_get_profile_continuation(const u8 *ie, size_t ielen,
const struct element *mbssid_elem,
const struct element *sub_elem)
{
const u8 *mbssid_end = mbssid_elem->data + mbssid_elem->datalen;
const struct element *next_mbssid;
const struct element *next_sub;
next_mbssid = cfg80211_find_elem(WLAN_EID_MULTIPLE_BSSID,
mbssid_end,
ielen - (mbssid_end - ie));
/*
* If is is not the last subelement in current MBSSID IE or there isn't
* a next MBSSID IE - profile is complete.
*/
if ((sub_elem->data + sub_elem->datalen < mbssid_end - 1) ||
!next_mbssid)
return NULL;
/* For any length error, just return NULL */
if (next_mbssid->datalen < 4)
return NULL;
next_sub = (void *)&next_mbssid->data[1];
if (next_mbssid->data + next_mbssid->datalen <
next_sub->data + next_sub->datalen)
return NULL;
if (next_sub->id != 0 || next_sub->datalen < 2)
return NULL;
/*
* Check if the first element in the next sub element is a start
* of a new profile
*/
return next_sub->data[0] == WLAN_EID_NON_TX_BSSID_CAP ?
NULL : next_mbssid;
}
size_t cfg80211_merge_profile(const u8 *ie, size_t ielen,
const struct element *mbssid_elem,
const struct element *sub_elem,
u8 *merged_ie, size_t max_copy_len)
{
size_t copied_len = sub_elem->datalen;
const struct element *next_mbssid;
if (sub_elem->datalen > max_copy_len)
return 0;
memcpy(merged_ie, sub_elem->data, sub_elem->datalen);
while ((next_mbssid = cfg80211_get_profile_continuation(ie, ielen,
mbssid_elem,
sub_elem))) {
const struct element *next_sub = (void *)&next_mbssid->data[1];
if (copied_len + next_sub->datalen > max_copy_len)
break;
memcpy(merged_ie + copied_len, next_sub->data,
next_sub->datalen);
copied_len += next_sub->datalen;
}
return copied_len;
}
EXPORT_SYMBOL(cfg80211_merge_profile);
static void cfg80211_parse_mbssid_data(struct wiphy *wiphy,
struct cfg80211_inform_bss *data,
enum cfg80211_bss_frame_type ftype,
const u8 *bssid, u64 tsf,
u16 beacon_interval, const u8 *ie,
size_t ielen,
struct cfg80211_non_tx_bss *non_tx_data,
gfp_t gfp)
{
const u8 *mbssid_index_ie;
const struct element *elem, *sub;
size_t new_ie_len;
u8 new_bssid[ETH_ALEN];
u8 *new_ie, *profile;
u64 seen_indices = 0;
u16 capability;
struct cfg80211_bss *bss;
if (!non_tx_data)
return;
if (!cfg80211_find_ie(WLAN_EID_MULTIPLE_BSSID, ie, ielen))
return;
if (!wiphy->support_mbssid)
return;
if (wiphy->support_only_he_mbssid &&
!cfg80211_find_ext_ie(WLAN_EID_EXT_HE_CAPABILITY, ie, ielen))
return;
new_ie = kmalloc(IEEE80211_MAX_DATA_LEN, gfp);
if (!new_ie)
return;
profile = kmalloc(ielen, gfp);
if (!profile)
goto out;
for_each_element_id(elem, WLAN_EID_MULTIPLE_BSSID, ie, ielen) {
if (elem->datalen < 4)
continue;
for_each_element(sub, elem->data + 1, elem->datalen - 1) {
u8 profile_len;
if (sub->id != 0 || sub->datalen < 4) {
/* not a valid BSS profile */
continue;
}
if (sub->data[0] != WLAN_EID_NON_TX_BSSID_CAP ||
sub->data[1] != 2) {
/* The first element within the Nontransmitted
* BSSID Profile is not the Nontransmitted
* BSSID Capability element.
*/
continue;
}
memset(profile, 0, ielen);
profile_len = cfg80211_merge_profile(ie, ielen,
elem,
sub,
profile,
ielen);
/* found a Nontransmitted BSSID Profile */
mbssid_index_ie = cfg80211_find_ie
(WLAN_EID_MULTI_BSSID_IDX,
profile, profile_len);
if (!mbssid_index_ie || mbssid_index_ie[1] < 1 ||
mbssid_index_ie[2] == 0 ||
mbssid_index_ie[2] > 46) {
/* No valid Multiple BSSID-Index element */
continue;
}
if (seen_indices & BIT_ULL(mbssid_index_ie[2]))
/* We don't support legacy split of a profile */
net_dbg_ratelimited("Partial info for BSSID index %d\n",
mbssid_index_ie[2]);
seen_indices |= BIT_ULL(mbssid_index_ie[2]);
non_tx_data->bssid_index = mbssid_index_ie[2];
non_tx_data->max_bssid_indicator = elem->data[0];
cfg80211_gen_new_bssid(bssid,
non_tx_data->max_bssid_indicator,
non_tx_data->bssid_index,
new_bssid);
memset(new_ie, 0, IEEE80211_MAX_DATA_LEN);
new_ie_len = cfg80211_gen_new_ie(ie, ielen,
profile,
profile_len, new_ie,
gfp);
if (!new_ie_len)
continue;
capability = get_unaligned_le16(profile + 2);
bss = cfg80211_inform_single_bss_data(wiphy, data,
ftype,
new_bssid, tsf,
capability,
beacon_interval,
new_ie,
new_ie_len,
non_tx_data,
gfp);
if (!bss)
break;
cfg80211_put_bss(wiphy, bss);
}
}
out:
kfree(new_ie);
kfree(profile);
}
struct cfg80211_bss *
cfg80211_inform_bss_data(struct wiphy *wiphy,
struct cfg80211_inform_bss *data,
enum cfg80211_bss_frame_type ftype,
const u8 *bssid, u64 tsf, u16 capability,
u16 beacon_interval, const u8 *ie, size_t ielen,
gfp_t gfp)
{
struct cfg80211_bss *res;
struct cfg80211_non_tx_bss non_tx_data;
res = cfg80211_inform_single_bss_data(wiphy, data, ftype, bssid, tsf,
capability, beacon_interval, ie,
ielen, NULL, gfp);
non_tx_data.tx_bss = res;
cfg80211_parse_mbssid_data(wiphy, data, ftype, bssid, tsf,
beacon_interval, ie, ielen, &non_tx_data,
gfp);
return res;
}
EXPORT_SYMBOL(cfg80211_inform_bss_data);
static void
cfg80211_parse_mbssid_frame_data(struct wiphy *wiphy,
struct cfg80211_inform_bss *data,
struct ieee80211_mgmt *mgmt, size_t len,
struct cfg80211_non_tx_bss *non_tx_data,
gfp_t gfp)
{
enum cfg80211_bss_frame_type ftype;
const u8 *ie = mgmt->u.probe_resp.variable;
size_t ielen = len - offsetof(struct ieee80211_mgmt,
u.probe_resp.variable);
ftype = ieee80211_is_beacon(mgmt->frame_control) ?
CFG80211_BSS_FTYPE_BEACON : CFG80211_BSS_FTYPE_PRESP;
cfg80211_parse_mbssid_data(wiphy, data, ftype, mgmt->bssid,
le64_to_cpu(mgmt->u.probe_resp.timestamp),
le16_to_cpu(mgmt->u.probe_resp.beacon_int),
ie, ielen, non_tx_data, gfp);
}
static void
cfg80211_update_notlisted_nontrans(struct wiphy *wiphy,
struct cfg80211_bss *nontrans_bss,
struct ieee80211_mgmt *mgmt, size_t len,
gfp_t gfp)
{
u8 *ie, *new_ie, *pos;
const u8 *nontrans_ssid, *trans_ssid, *mbssid;
size_t ielen = len - offsetof(struct ieee80211_mgmt,
u.probe_resp.variable);
size_t new_ie_len;
struct cfg80211_bss_ies *new_ies;
const struct cfg80211_bss_ies *old;
u8 cpy_len;
ie = mgmt->u.probe_resp.variable;
new_ie_len = ielen;
trans_ssid = cfg80211_find_ie(WLAN_EID_SSID, ie, ielen);
if (!trans_ssid)
return;
new_ie_len -= trans_ssid[1];
mbssid = cfg80211_find_ie(WLAN_EID_MULTIPLE_BSSID, ie, ielen);
if (!mbssid)
return;
new_ie_len -= mbssid[1];
rcu_read_lock();
nontrans_ssid = ieee80211_bss_get_ie(nontrans_bss, WLAN_EID_SSID);
if (!nontrans_ssid) {
rcu_read_unlock();
return;
}
new_ie_len += nontrans_ssid[1];
rcu_read_unlock();
/* generate new ie for nontrans BSS
* 1. replace SSID with nontrans BSS' SSID
* 2. skip MBSSID IE
*/
new_ie = kzalloc(new_ie_len, gfp);
if (!new_ie)
return;
new_ies = kzalloc(sizeof(*new_ies) + new_ie_len, gfp);
if (!new_ies)
goto out_free;
pos = new_ie;
/* copy the nontransmitted SSID */
cpy_len = nontrans_ssid[1] + 2;
memcpy(pos, nontrans_ssid, cpy_len);
pos += cpy_len;
/* copy the IEs between SSID and MBSSID */
cpy_len = trans_ssid[1] + 2;
memcpy(pos, (trans_ssid + cpy_len), (mbssid - (trans_ssid + cpy_len)));
pos += (mbssid - (trans_ssid + cpy_len));
/* copy the IEs after MBSSID */
cpy_len = mbssid[1] + 2;
memcpy(pos, mbssid + cpy_len, ((ie + ielen) - (mbssid + cpy_len)));
/* update ie */
new_ies->len = new_ie_len;
new_ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp);
new_ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control);
memcpy(new_ies->data, new_ie, new_ie_len);
if (ieee80211_is_probe_resp(mgmt->frame_control)) {
old = rcu_access_pointer(nontrans_bss->proberesp_ies);
rcu_assign_pointer(nontrans_bss->proberesp_ies, new_ies);
rcu_assign_pointer(nontrans_bss->ies, new_ies);
if (old)
kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head);
} else {
old = rcu_access_pointer(nontrans_bss->beacon_ies);
rcu_assign_pointer(nontrans_bss->beacon_ies, new_ies);
rcu_assign_pointer(nontrans_bss->ies, new_ies);
if (old)
kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head);
}
out_free:
kfree(new_ie);
}
/* cfg80211_inform_bss_width_frame helper */
static struct cfg80211_bss *
cfg80211_inform_single_bss_frame_data(struct wiphy *wiphy,
struct cfg80211_inform_bss *data,
struct ieee80211_mgmt *mgmt, size_t len,
struct cfg80211_non_tx_bss *non_tx_data,
gfp_t gfp)
{
struct cfg80211_internal_bss tmp = {}, *res;
struct cfg80211_bss_ies *ies;
struct ieee80211_channel *channel;
bool signal_valid;
size_t ielen = len - offsetof(struct ieee80211_mgmt,
u.probe_resp.variable);
int bss_type;
BUILD_BUG_ON(offsetof(struct ieee80211_mgmt, u.probe_resp.variable) !=
offsetof(struct ieee80211_mgmt, u.beacon.variable));
trace_cfg80211_inform_bss_frame(wiphy, data, mgmt, len);
if (WARN_ON(!mgmt))
return NULL;
if (WARN_ON(!wiphy))
return NULL;
if (WARN_ON(wiphy->signal_type == CFG80211_SIGNAL_TYPE_UNSPEC &&
(data->signal < 0 || data->signal > 100)))
return NULL;
if (WARN_ON(len < offsetof(struct ieee80211_mgmt, u.probe_resp.variable)))
return NULL;
channel = cfg80211_get_bss_channel(wiphy, mgmt->u.beacon.variable,
ielen, data->chan, data->scan_width);
if (!channel)
return NULL;
ies = kzalloc(sizeof(*ies) + ielen, gfp);
if (!ies)
return NULL;
ies->len = ielen;
ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp);
ies->from_beacon = ieee80211_is_beacon(mgmt->frame_control);
memcpy(ies->data, mgmt->u.probe_resp.variable, ielen);
if (ieee80211_is_probe_resp(mgmt->frame_control))
rcu_assign_pointer(tmp.pub.proberesp_ies, ies);
else
rcu_assign_pointer(tmp.pub.beacon_ies, ies);
rcu_assign_pointer(tmp.pub.ies, ies);
memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN);
tmp.pub.channel = channel;
tmp.pub.scan_width = data->scan_width;
tmp.pub.signal = data->signal;
tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int);
tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info);
tmp.ts_boottime = data->boottime_ns;
tmp.parent_tsf = data->parent_tsf;
tmp.pub.chains = data->chains;
memcpy(tmp.pub.chain_signal, data->chain_signal, IEEE80211_MAX_CHAINS);
ether_addr_copy(tmp.parent_bssid, data->parent_bssid);
if (non_tx_data) {
tmp.pub.transmitted_bss = non_tx_data->tx_bss;
tmp.pub.bssid_index = non_tx_data->bssid_index;
tmp.pub.max_bssid_indicator = non_tx_data->max_bssid_indicator;
}
signal_valid = abs(data->chan->center_freq - channel->center_freq) <=
wiphy->max_adj_channel_rssi_comp;
res = cfg80211_bss_update(wiphy_to_rdev(wiphy), &tmp, signal_valid,
jiffies);
if (!res)
return NULL;
if (channel->band == NL80211_BAND_60GHZ) {
bss_type = res->pub.capability & WLAN_CAPABILITY_DMG_TYPE_MASK;
if (bss_type == WLAN_CAPABILITY_DMG_TYPE_AP ||
bss_type == WLAN_CAPABILITY_DMG_TYPE_PBSS)
regulatory_hint_found_beacon(wiphy, channel, gfp);
} else {
if (res->pub.capability & WLAN_CAPABILITY_ESS)
regulatory_hint_found_beacon(wiphy, channel, gfp);
}
trace_cfg80211_return_bss(&res->pub);
/* cfg80211_bss_update gives us a referenced result */
return &res->pub;
}
struct cfg80211_bss *
cfg80211_inform_bss_frame_data(struct wiphy *wiphy,
struct cfg80211_inform_bss *data,
struct ieee80211_mgmt *mgmt, size_t len,
gfp_t gfp)
{
struct cfg80211_bss *res, *tmp_bss;
const u8 *ie = mgmt->u.probe_resp.variable;
const struct cfg80211_bss_ies *ies1, *ies2;
size_t ielen = len - offsetof(struct ieee80211_mgmt,
u.probe_resp.variable);
struct cfg80211_non_tx_bss non_tx_data;
res = cfg80211_inform_single_bss_frame_data(wiphy, data, mgmt,
len, NULL, gfp);
if (!res || !wiphy->support_mbssid ||
!cfg80211_find_ie(WLAN_EID_MULTIPLE_BSSID, ie, ielen))
return res;
if (wiphy->support_only_he_mbssid &&
!cfg80211_find_ext_ie(WLAN_EID_EXT_HE_CAPABILITY, ie, ielen))
return res;
non_tx_data.tx_bss = res;
/* process each non-transmitting bss */
cfg80211_parse_mbssid_frame_data(wiphy, data, mgmt, len,
&non_tx_data, gfp);
/* check if the res has other nontransmitting bss which is not
* in MBSSID IE
*/
ies1 = rcu_access_pointer(res->ies);
/* go through nontrans_list, if the timestamp of the BSS is
* earlier than the timestamp of the transmitting BSS then
* update it
*/
list_for_each_entry(tmp_bss, &res->nontrans_list,
nontrans_list) {
ies2 = rcu_access_pointer(tmp_bss->ies);
if (ies2->tsf < ies1->tsf)
cfg80211_update_notlisted_nontrans(wiphy, tmp_bss,
mgmt, len, gfp);
}
return res;
}
EXPORT_SYMBOL(cfg80211_inform_bss_frame_data);
void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_internal_bss *bss;
if (!pub)
return;
bss = container_of(pub, struct cfg80211_internal_bss, pub);
spin_lock_bh(&rdev->bss_lock);
bss_ref_get(rdev, bss);
spin_unlock_bh(&rdev->bss_lock);
}
EXPORT_SYMBOL(cfg80211_ref_bss);
void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_internal_bss *bss;
if (!pub)
return;
bss = container_of(pub, struct cfg80211_internal_bss, pub);
spin_lock_bh(&rdev->bss_lock);
bss_ref_put(rdev, bss);
spin_unlock_bh(&rdev->bss_lock);
}
EXPORT_SYMBOL(cfg80211_put_bss);
void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_internal_bss *bss, *tmp1;
struct cfg80211_bss *nontrans_bss, *tmp;
if (WARN_ON(!pub))
return;
bss = container_of(pub, struct cfg80211_internal_bss, pub);
spin_lock_bh(&rdev->bss_lock);
if (list_empty(&bss->list))
goto out;
list_for_each_entry_safe(nontrans_bss, tmp,
&pub->nontrans_list,
nontrans_list) {
tmp1 = container_of(nontrans_bss,
struct cfg80211_internal_bss, pub);
if (__cfg80211_unlink_bss(rdev, tmp1))
rdev->bss_generation++;
}
if (__cfg80211_unlink_bss(rdev, bss))
rdev->bss_generation++;
out:
spin_unlock_bh(&rdev->bss_lock);
}
EXPORT_SYMBOL(cfg80211_unlink_bss);
void cfg80211_bss_iter(struct wiphy *wiphy,
struct cfg80211_chan_def *chandef,
void (*iter)(struct wiphy *wiphy,
struct cfg80211_bss *bss,
void *data),
void *iter_data)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct cfg80211_internal_bss *bss;
spin_lock_bh(&rdev->bss_lock);
list_for_each_entry(bss, &rdev->bss_list, list) {
if (!chandef || cfg80211_is_sub_chan(chandef, bss->pub.channel))
iter(wiphy, &bss->pub, iter_data);
}
spin_unlock_bh(&rdev->bss_lock);
}
EXPORT_SYMBOL(cfg80211_bss_iter);
#ifdef CONFIG_CFG80211_WEXT
static struct cfg80211_registered_device *
cfg80211_get_dev_from_ifindex(struct net *net, int ifindex)
{
struct cfg80211_registered_device *rdev;
struct net_device *dev;
ASSERT_RTNL();
dev = dev_get_by_index(net, ifindex);
if (!dev)
return ERR_PTR(-ENODEV);
if (dev->ieee80211_ptr)
rdev = wiphy_to_rdev(dev->ieee80211_ptr->wiphy);
else
rdev = ERR_PTR(-ENODEV);
dev_put(dev);
return rdev;
}
int cfg80211_wext_siwscan(struct net_device *dev,
struct iw_request_info *info,
union iwreq_data *wrqu, char *extra)
{
struct cfg80211_registered_device *rdev;
struct wiphy *wiphy;
struct iw_scan_req *wreq = NULL;
struct cfg80211_scan_request *creq = NULL;
int i, err, n_channels = 0;
enum nl80211_band band;
if (!netif_running(dev))
return -ENETDOWN;
if (wrqu->data.length == sizeof(struct iw_scan_req))
wreq = (struct iw_scan_req *)extra;
rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
if (rdev->scan_req || rdev->scan_msg) {
err = -EBUSY;
goto out;
}
wiphy = &rdev->wiphy;
/* Determine number of channels, needed to allocate creq */
if (wreq && wreq->num_channels)
n_channels = wreq->num_channels;
else
n_channels = ieee80211_get_num_supported_channels(wiphy);
creq = kzalloc(sizeof(*creq) + sizeof(struct cfg80211_ssid) +
n_channels * sizeof(void *),
GFP_ATOMIC);
if (!creq) {
err = -ENOMEM;
goto out;
}
creq->wiphy = wiphy;
creq->wdev = dev->ieee80211_ptr;
/* SSIDs come after channels */
creq->ssids = (void *)&creq->channels[n_channels];
creq->n_channels = n_channels;
creq->n_ssids = 1;
creq->scan_start = jiffies;
/* translate "Scan on frequencies" request */
i = 0;
for (band = 0; band < NUM_NL80211_BANDS; band++) {
int j;
if (!wiphy->bands[band])
continue;
for (j = 0; j < wiphy->bands[band]->n_channels; j++) {
/* ignore disabled channels */
if (wiphy->bands[band]->channels[j].flags &
IEEE80211_CHAN_DISABLED)
continue;
/* If we have a wireless request structure and the
* wireless request specifies frequencies, then search
* for the matching hardware channel.
*/
if (wreq && wreq->num_channels) {
int k;
int wiphy_freq = wiphy->bands[band]->channels[j].center_freq;
for (k = 0; k < wreq->num_channels; k++) {
struct iw_freq *freq =
&wreq->channel_list[k];
int wext_freq =
cfg80211_wext_freq(freq);
if (wext_freq == wiphy_freq)
goto wext_freq_found;
}
goto wext_freq_not_found;
}
wext_freq_found:
creq->channels[i] = &wiphy->bands[band]->channels[j];
i++;
wext_freq_not_found: ;
}
}
/* No channels found? */
if (!i) {
err = -EINVAL;
goto out;
}
/* Set real number of channels specified in creq->channels[] */
creq->n_channels = i;
/* translate "Scan for SSID" request */
if (wreq) {
if (wrqu->data.flags & IW_SCAN_THIS_ESSID) {
if (wreq->essid_len > IEEE80211_MAX_SSID_LEN) {
err = -EINVAL;
goto out;
}
memcpy(creq->ssids[0].ssid, wreq->essid, wreq->essid_len);
creq->ssids[0].ssid_len = wreq->essid_len;
}
if (wreq->scan_type == IW_SCAN_TYPE_PASSIVE)
creq->n_ssids = 0;
}
for (i = 0; i < NUM_NL80211_BANDS; i++)
if (wiphy->bands[i])
creq->rates[i] = (1 << wiphy->bands[i]->n_bitrates) - 1;
eth_broadcast_addr(creq->bssid);
rdev->scan_req = creq;
err = rdev_scan(rdev, creq);
if (err) {
rdev->scan_req = NULL;
/* creq will be freed below */
} else {
nl80211_send_scan_start(rdev, dev->ieee80211_ptr);
/* creq now owned by driver */
creq = NULL;
dev_hold(dev);
}
out:
kfree(creq);
return err;
}
EXPORT_WEXT_HANDLER(cfg80211_wext_siwscan);
static char *ieee80211_scan_add_ies(struct iw_request_info *info,
const struct cfg80211_bss_ies *ies,
char *current_ev, char *end_buf)
{
const u8 *pos, *end, *next;
struct iw_event iwe;
if (!ies)
return current_ev;
/*
* If needed, fragment the IEs buffer (at IE boundaries) into short
* enough fragments to fit into IW_GENERIC_IE_MAX octet messages.
*/
pos = ies->data;
end = pos + ies->len;
while (end - pos > IW_GENERIC_IE_MAX) {
next = pos + 2 + pos[1];
while (next + 2 + next[1] - pos < IW_GENERIC_IE_MAX)
next = next + 2 + next[1];
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVGENIE;
iwe.u.data.length = next - pos;
current_ev = iwe_stream_add_point_check(info, current_ev,
end_buf, &iwe,
(void *)pos);
if (IS_ERR(current_ev))
return current_ev;
pos = next;
}
if (end > pos) {
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVGENIE;
iwe.u.data.length = end - pos;
current_ev = iwe_stream_add_point_check(info, current_ev,
end_buf, &iwe,
(void *)pos);
if (IS_ERR(current_ev))
return current_ev;
}
return current_ev;
}
static char *
ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info,
struct cfg80211_internal_bss *bss, char *current_ev,
char *end_buf)
{
const struct cfg80211_bss_ies *ies;
struct iw_event iwe;
const u8 *ie;
u8 buf[50];
u8 *cfg, *p, *tmp;
int rem, i, sig;
bool ismesh = false;
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWAP;
iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
memcpy(iwe.u.ap_addr.sa_data, bss->pub.bssid, ETH_ALEN);
current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe,
IW_EV_ADDR_LEN);
if (IS_ERR(current_ev))
return current_ev;
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
iwe.u.freq.m = ieee80211_frequency_to_channel(bss->pub.channel->center_freq);
iwe.u.freq.e = 0;
current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
if (IS_ERR(current_ev))
return current_ev;
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWFREQ;
iwe.u.freq.m = bss->pub.channel->center_freq;
iwe.u.freq.e = 6;
current_ev = iwe_stream_add_event_check(info, current_ev, end_buf, &iwe,
IW_EV_FREQ_LEN);
if (IS_ERR(current_ev))
return current_ev;
if (wiphy->signal_type != CFG80211_SIGNAL_TYPE_NONE) {
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVQUAL;
iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED |
IW_QUAL_NOISE_INVALID |
IW_QUAL_QUAL_UPDATED;
switch (wiphy->signal_type) {
case CFG80211_SIGNAL_TYPE_MBM:
sig = bss->pub.signal / 100;
iwe.u.qual.level = sig;
iwe.u.qual.updated |= IW_QUAL_DBM;
if (sig < -110) /* rather bad */
sig = -110;
else if (sig > -40) /* perfect */
sig = -40;
/* will give a range of 0 .. 70 */
iwe.u.qual.qual = sig + 110;
break;
case CFG80211_SIGNAL_TYPE_UNSPEC:
iwe.u.qual.level = bss->pub.signal;
/* will give range 0 .. 100 */
iwe.u.qual.qual = bss->pub.signal;
break;
default:
/* not reached */
break;
}
current_ev = iwe_stream_add_event_check(info, current_ev,
end_buf, &iwe,
IW_EV_QUAL_LEN);
if (IS_ERR(current_ev))
return current_ev;
}
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWENCODE;
if (bss->pub.capability & WLAN_CAPABILITY_PRIVACY)
iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
else
iwe.u.data.flags = IW_ENCODE_DISABLED;
iwe.u.data.length = 0;
current_ev = iwe_stream_add_point_check(info, current_ev, end_buf,
&iwe, "");
if (IS_ERR(current_ev))
return current_ev;
rcu_read_lock();
ies = rcu_dereference(bss->pub.ies);
rem = ies->len;
ie = ies->data;
while (rem >= 2) {
/* invalid data */
if (ie[1] > rem - 2)
break;
switch (ie[0]) {
case WLAN_EID_SSID:
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWESSID;
iwe.u.data.length = ie[1];
iwe.u.data.flags = 1;
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf, &iwe,
(u8 *)ie + 2);
if (IS_ERR(current_ev))
goto unlock;
break;
case WLAN_EID_MESH_ID:
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWESSID;
iwe.u.data.length = ie[1];
iwe.u.data.flags = 1;
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf, &iwe,
(u8 *)ie + 2);
if (IS_ERR(current_ev))
goto unlock;
break;
case WLAN_EID_MESH_CONFIG:
ismesh = true;
if (ie[1] != sizeof(struct ieee80211_meshconf_ie))
break;
cfg = (u8 *)ie + 2;
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
sprintf(buf, "Mesh Network Path Selection Protocol ID: "
"0x%02X", cfg[0]);
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
sprintf(buf, "Path Selection Metric ID: 0x%02X",
cfg[1]);
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
sprintf(buf, "Congestion Control Mode ID: 0x%02X",
cfg[2]);
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
sprintf(buf, "Synchronization ID: 0x%02X", cfg[3]);
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
sprintf(buf, "Authentication ID: 0x%02X", cfg[4]);
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
sprintf(buf, "Formation Info: 0x%02X", cfg[5]);
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
sprintf(buf, "Capabilities: 0x%02X", cfg[6]);
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info,
current_ev,
end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
break;
case WLAN_EID_SUPP_RATES:
case WLAN_EID_EXT_SUPP_RATES:
/* display all supported rates in readable format */
p = current_ev + iwe_stream_lcp_len(info);
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWRATE;
/* Those two flags are ignored... */
iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
for (i = 0; i < ie[1]; i++) {
iwe.u.bitrate.value =
((ie[i + 2] & 0x7f) * 500000);
tmp = p;
p = iwe_stream_add_value(info, current_ev, p,
end_buf, &iwe,
IW_EV_PARAM_LEN);
if (p == tmp) {
current_ev = ERR_PTR(-E2BIG);
goto unlock;
}
}
current_ev = p;
break;
}
rem -= ie[1] + 2;
ie += ie[1] + 2;
}
if (bss->pub.capability & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS) ||
ismesh) {
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = SIOCGIWMODE;
if (ismesh)
iwe.u.mode = IW_MODE_MESH;
else if (bss->pub.capability & WLAN_CAPABILITY_ESS)
iwe.u.mode = IW_MODE_MASTER;
else
iwe.u.mode = IW_MODE_ADHOC;
current_ev = iwe_stream_add_event_check(info, current_ev,
end_buf, &iwe,
IW_EV_UINT_LEN);
if (IS_ERR(current_ev))
goto unlock;
}
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf));
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info, current_ev, end_buf,
&iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
memset(&iwe, 0, sizeof(iwe));
iwe.cmd = IWEVCUSTOM;
sprintf(buf, " Last beacon: %ums ago",
elapsed_jiffies_msecs(bss->ts));
iwe.u.data.length = strlen(buf);
current_ev = iwe_stream_add_point_check(info, current_ev,
end_buf, &iwe, buf);
if (IS_ERR(current_ev))
goto unlock;
current_ev = ieee80211_scan_add_ies(info, ies, current_ev, end_buf);
unlock:
rcu_read_unlock();
return current_ev;
}
static int ieee80211_scan_results(struct cfg80211_registered_device *rdev,
struct iw_request_info *info,
char *buf, size_t len)
{
char *current_ev = buf;
char *end_buf = buf + len;
struct cfg80211_internal_bss *bss;
int err = 0;
spin_lock_bh(&rdev->bss_lock);
cfg80211_bss_expire(rdev);
list_for_each_entry(bss, &rdev->bss_list, list) {
if (buf + len - current_ev <= IW_EV_ADDR_LEN) {
err = -E2BIG;
break;
}
current_ev = ieee80211_bss(&rdev->wiphy, info, bss,
current_ev, end_buf);
if (IS_ERR(current_ev)) {
err = PTR_ERR(current_ev);
break;
}
}
spin_unlock_bh(&rdev->bss_lock);
if (err)
return err;
return current_ev - buf;
}
int cfg80211_wext_giwscan(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *data, char *extra)
{
struct cfg80211_registered_device *rdev;
int res;
if (!netif_running(dev))
return -ENETDOWN;
rdev = cfg80211_get_dev_from_ifindex(dev_net(dev), dev->ifindex);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
if (rdev->scan_req || rdev->scan_msg)
return -EAGAIN;
res = ieee80211_scan_results(rdev, info, extra, data->length);
data->length = 0;
if (res >= 0) {
data->length = res;
res = 0;
}
return res;
}
EXPORT_WEXT_HANDLER(cfg80211_wext_giwscan);
#endif