AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 11:35:07 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d7290cd04b
linux_dsm_epyc7002/drivers/usb/core/hcd.c

2987 lines
85 KiB
C
Raw Normal View History

USB: add SPDX identifiers to all remaining files in drivers/usb/ It's good to have SPDX identifiers in all files to make it easier to audit the kernel tree for correct licenses. Update the drivers/usb/ and include/linux/usb* files with the correct SPDX license identifier based on the license text in the file itself. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This work is based on a script and data from Thomas Gleixner, Philippe Ombredanne, and Kate Stewart. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Felipe Balbi <felipe.balbi@linux.intel.com> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-03 17:28:30 +07:00
// SPDX-License-Identifier: GPL-2.0+
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* (C) Copyright Linus Torvalds 1999
* (C) Copyright Johannes Erdfelt 1999-2001
* (C) Copyright Andreas Gal 1999
* (C) Copyright Gregory P. Smith 1999
* (C) Copyright Deti Fliegl 1999
* (C) Copyright Randy Dunlap 2000
* (C) Copyright David Brownell 2000-2002
*/
usb/core: use bin2bcd() for bcdDevice in RH The kernel's version number is used as decimal in the bcdDevice field of the RH descriptor. For kernel version v3.12 we would see 3.0c in lsusb. I am not sure how important it is to stick with bcd values since this is this way since we started git history and nobody complained (however back then we reported only 2.6). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07 19:31:45 +07:00
#include <linux/bcd.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <linux/module.h>
#include <linux/version.h>
#include <linux/kernel.h>
usb: core: Check URB setup_packet and transfer_buffer sanity Update usb_hcd_map_urb_for_dma() to check for an URB's setup_packet and transfer_buffer sanity. We first check that urb->setup_packet is neither coming from vmalloc space nor is an on stack buffer, and if that's the case, produce a warning and return an error. For urb->transfer_buffer there is an existing is_vmalloc_addr() check so we just supplement that with an object_is_on_stack() check, produce a warning if that is the case and also return an error. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26 07:56:11 +07:00
#include <linux/sched/task_stack.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <linux/slab.h>
#include <linux/completion.h>
#include <linux/utsname.h>
#include <linux/mm.h>
#include <asm/io.h>
#include <linux/device.h>
#include <linux/dma-mapping.h>
[PATCH] USB: convert a bunch of USB semaphores to mutexes the patch below converts a bunch of semaphores-used-as-mutex in the USB code to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-11 21:55:29 +07:00
#include <linux/mutex.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <asm/irq.h>
#include <asm/byteorder.h>
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
#include <asm/unaligned.h>
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 07:24:08 +07:00
#include <linux/platform_device.h>
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 03:37:30 +07:00
#include <linux/workqueue.h>
USB: add usb_hcd_{start,end}_port_resume This patch (as1649) adds a mechanism for host controller drivers to inform usbcore when they have begun or ended resume signalling on a particular root-hub port. The core will then make sure that the root hub does not get runtime-suspended while the port resume is going on. Since commit 596d789a211d134dc5f94d1e5957248c204ef850 (USB: set hub's default autosuspend delay as 0), the system tries to suspend hubs whenever they aren't in use. While a root-hub port is being resumed, the root hub does not appear to be in use. Attempted runtime suspends fail because of the ongoing port resume, but the PM core just keeps on trying over and over again. We want to prevent this wasteful effort. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-26 05:09:42 +07:00
#include <linux/pm_runtime.h>
drivers: usb: core: hcd.c: converted busmap from struct to bitmap The DECLARE_BITMAP macro should be used for declaring this bitmap. This commit converts the busmap from a struct to a simple (static) bitmap, using the DECLARE_BITMAP macro from linux/types.h. Please review, as I'm new to kernel development, I don't know if this has any hidden side effects! Suggested by joe@perches.com Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-06 04:09:15 +07:00
#include <linux/types.h>
USB: use genalloc for USB HCs with local memory For HCs that have local memory, replace the current DMA API usage with a genalloc generic allocator to manage the mappings for these devices. To help users, introduce a new HCD API, usb_hcd_setup_local_mem() that will setup up the genalloc backing up the device local memory. It will be used in subsequent patches. This is in preparation for dropping the existing "coherent" dma mem declaration APIs. The current implementation was relying on a short circuit in the DMA API that in the end, was acting as an allocator for these type of devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:40 +07:00
#include <linux/genalloc.h>
#include <linux/io.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: hcd: add generic PHY support Add the generic PHY support, analogous to the USB PHY support. Intended it to be used with the PCI EHCI/OHCI drivers and the xHCI platform driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-25 02:09:44 +07:00
#include <linux/phy/phy.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include <linux/usb.h>
USB: make hcd.h public (drivers dependency) The usbcore headers: hcd.h and hub.h are shared between usbcore, HCDs and a couple of other drivers (e.g. USBIP modules). So, it makes sense to move them into a more public location and to cleanup dependency of those modules on kernel internal headers. This patch moves hcd.h from drivers/usb/core into include/linux/usb/ Signed-of-by: Eric Lescouet <eric@lescouet.org> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-25 04:21:52 +07:00
#include <linux/usb/hcd.h>
usb: core: hcd: add missing header dependencies We get 1 warning when building kernel with W=1: drivers/usb/core/hcd.c:2390:5: warning: no previous prototype for 'usb_bus_start_enum' [-Wmissing-prototypes] In fact, these functions are declared in linux/usb/otg.h, so this patch adds the missing header dependencies. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-23 20:44:13 +07:00
#include <linux/usb/otg.h>
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#include "usb.h"
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
#include "phy.h"
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
/*
* USB Host Controller Driver framework
*
* Plugs into usbcore (usb_bus) and lets HCDs share code, minimizing
* HCD-specific behaviors/bugs.
*
* This does error checks, tracks devices and urbs, and delegates to a
* "hc_driver" only for code (and data) that really needs to know about
* hardware differences. That includes root hub registers, i/o queues,
* and so on ... but as little else as possible.
*
* Shared code includes most of the "root hub" code (these are emulated,
* though each HC's hardware works differently) and PCI glue, plus request
* tracking overhead. The HCD code should only block on spinlocks or on
* hardware handshaking; blocking on software events (such as other kernel
* threads releasing resources, or completing actions) is all generic.
*
* Happens the USB 2.0 spec says this would be invisible inside the "USBD",
* and includes mostly a "HCDI" (HCD Interface) along with some APIs used
* only by the hub driver ... and that neither should be seen or used by
* usb client device drivers.
*
* Contributors of ideas or unattributed patches include: David Brownell,
* Roman Weissgaerber, Rory Bolt, Greg Kroah-Hartman, ...
*
* HISTORY:
* 2002-02-21 Pull in most of the usb_bus support from usb.c; some
* associated cleanup. "usb_hcd" still != "usb_bus".
* 2001-12-12 Initial patch version for Linux 2.5.1 kernel.
*/
/*-------------------------------------------------------------------------*/
USB: EHCI: log a warning if ehci-hcd is not loaded first This patch (as1139) adds a warning to the system log whenever ehci-hcd is loaded after ohci-hcd or uhci-hcd. Nowadays most distributions are pretty good about not doing this; maybe the warning will help convince anyone still doing it wrong. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> [2.6.27] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-02 22:48:13 +07:00
/* Keep track of which host controller drivers are loaded */
unsigned long usb_hcds_loaded;
EXPORT_SYMBOL_GPL(usb_hcds_loaded);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* host controllers we manage */
usb: core: switch bus numbering to using idr USB bus numbering is based on directly dealing with bitmaps and defines a separate list of busses. This can be simplified and unified by using existing idr functionality. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-26 02:30:30 +07:00
DEFINE_IDR (usb_bus_idr);
EXPORT_SYMBOL_GPL (usb_bus_idr);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* used when allocating bus numbers */
#define USB_MAXBUS 64
/* used when updating list of hcds */
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
DEFINE_MUTEX(usb_bus_idr_lock); /* exported only for usbfs */
EXPORT_SYMBOL_GPL (usb_bus_idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* used for controlling access to virtual root hubs */
static DEFINE_SPINLOCK(hcd_root_hub_lock);
USB: change name of spinlock in hcd.c This patch (as940 renames hcd_data_lock in hcd.c to hcd_urb_list_lock, which is more descriptive of the lock's job. It also introduces a convenient inline routine for testing whether a particular USB device is a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:14:24 +07:00
/* used when updating an endpoint's URB list */
static DEFINE_SPINLOCK(hcd_urb_list_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: fix crash when URBs are unlinked after the device is gone This patch (as1151) protects usbcore against drivers that try to unlink an URB after the URB's device or bus have been removed. The core does not currently check for this, and certain drivers can cause a crash if they are running while an HCD is unloaded. Certainly it would be best to fix the guilty drivers. But a little defensive programming doesn't hurt, especially since it appears that quite a few drivers need to be fixed. The patch prevents the problem by grabbing a reference to the device while an unlink is in progress and using a new spinlock to synchronize unlinks with device removal. (There's no need to acquire a reference to the bus as well, since the device structure itself keeps a reference to the bus.) In addition, the kerneldoc is updated to indicate that URBs should not be unlinked after the disconnect method returns. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 02:28:46 +07:00
/* used to protect against unlinking URBs after the device is gone */
static DEFINE_SPINLOCK(hcd_urb_unlink_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* wait queue for synchronous unlinks */
DECLARE_WAIT_QUEUE_HEAD(usb_kill_urb_queue);
/*-------------------------------------------------------------------------*/
/*
* Sharable chunks of root hub code.
*/
/*-------------------------------------------------------------------------*/
usb/core: use bin2bcd() for bcdDevice in RH The kernel's version number is used as decimal in the bcdDevice field of the RH descriptor. For kernel version v3.12 we would see 3.0c in lsusb. I am not sure how important it is to stick with bcd values since this is this way since we started git history and nobody complained (however back then we reported only 2.6). Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-07 19:31:45 +07:00
#define KERNEL_REL bin2bcd(((LINUX_VERSION_CODE >> 16) & 0x0ff))
#define KERNEL_VER bin2bcd(((LINUX_VERSION_CODE >> 8) & 0x0ff))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: add device descriptor for usb 3.1 root hub Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-10 14:59:28 +07:00
/* usb 3.1 root hub device descriptor */
static const u8 usb31_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
0x10, 0x03, /* __le16 bcdUSB; v3.1 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x03, /* __u8 bDeviceProtocol; USB 3 hub */
0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
0x03, 0x00, /* __le16 idProduct; device 0x0003 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x02, /* __u8 iProduct; */
0x01, /* __u8 iSerialNumber; */
0x01 /* __u8 bNumConfigurations; */
};
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
/* usb 3.0 root hub device descriptor */
static const u8 usb3_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
0x00, 0x03, /* __le16 bcdUSB; v3.0 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x03, /* __u8 bDeviceProtocol; USB 3.0 hub */
0x09, /* __u8 bMaxPacketSize0; 2^9 = 512 Bytes */
USB: make vendor id of root hubs greppable It took me surprisingly long to find the location where the Linux Foundation vendor id (0x1d6b) is set for the root hubs. A minor update to three comments makes those locations (trivially) greppable. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-05 18:16:51 +07:00
0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
USB: fix the idProduct value for USB-3.0 root hubs This patch (as1346) changes the idProduct value for USB-3.0 root hubs from 0x0002 (which we already use for USB-2.0 root hubs) to 0x0003. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-02-26 01:19:37 +07:00
0x03, 0x00, /* __le16 idProduct; device 0x0003 */
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x02, /* __u8 iProduct; */
0x01, /* __u8 iSerialNumber; */
0x01 /* __u8 bNumConfigurations; */
};
Allow the USB HCD to create Wireless USB root hubs This patch adds Wireless USB root hub support to the USB HCD. It allows the HWA to create its root hub which previously failed because the HCD treated wireless root hubs the same as USB2 high speed hubs. The creation of the root hub would fail in that case due to lack of TTs which wireless root hubs do not support. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-01 02:16:13 +07:00
/* usb 2.5 (wireless USB 1.0) root hub device descriptor */
static const u8 usb25_rh_dev_descriptor[18] = {
0x12, /* __u8 bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
Allow the USB HCD to create Wireless USB root hubs This patch adds Wireless USB root hub support to the USB HCD. It allows the HWA to create its root hub which previously failed because the HCD treated wireless root hubs the same as USB2 high speed hubs. The creation of the root hub would fail in that case due to lack of TTs which wireless root hubs do not support. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-01 02:16:13 +07:00
0x50, 0x02, /* __le16 bcdUSB; v2.5 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
0xFF, /* __u8 bMaxPacketSize0; always 0xFF (WUSB Spec 7.4.1). */
0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
0x02, 0x00, /* __le16 idProduct; device 0x0002 */
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x02, /* __u8 iProduct; */
0x01, /* __u8 iSerialNumber; */
0x01 /* __u8 bNumConfigurations; */
};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* usb 2.0 root hub device descriptor */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
static const u8 usb2_rh_dev_descriptor[18] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x12, /* __u8 bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x00, 0x02, /* __le16 bcdUSB; v2.0 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
USB: root hubs don't lie about their number of TTs Currently EHCI root hubs enumerate with a bDeviceProtocol code indicating that they possess a Transaction Translator. However the vast majority of controllers do not; they rely on a companion controller to handle full- and low-speed communications. This patch (as1064) changes the root-hub device descriptor to match the actual situation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-04 05:02:56 +07:00
0x00, /* __u8 bDeviceProtocol; [ usb 2.0 no TT ] */
[PATCH] USB: Fix maxpacket length for ep0 on root hubs This patch (as591) fixes a rather innocuous bug that has been around for quite a long time: Virtual root hubs should have a maxpacket length of 64 for endpoint 0. I didn't realize it was wrong until I started looking through the endpoint attribute files. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-25 02:41:19 +07:00
0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: make vendor id of root hubs greppable It took me surprisingly long to find the location where the Linux Foundation vendor id (0x1d6b) is set for the root hubs. A minor update to three comments makes those locations (trivially) greppable. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-05 18:16:51 +07:00
0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
USB: use a real vendor and product id for root hubs Turns out that a company is out there using the vendor id of 0x0000 in the wild, so use a real vendor/product id for the root hubs. Now that the Linux Foundation has a real vendor id, we use that, and the first product id: 0x1d6b is the vendor id of the Linux Foundation 0x0001 is the product id for Linux 1.1 root hubs 0x0002 is the product id for Linux 2.0 root hubs The usb.ids file has already been updated with these values. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-29 00:50:12 +07:00
0x02, 0x00, /* __le16 idProduct; device 0x0002 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x02, /* __u8 iProduct; */
0x01, /* __u8 iSerialNumber; */
0x01 /* __u8 bNumConfigurations; */
};
/* no usb 2.0 root hub "device qualifier" descriptor: one speed only */
/* usb 1.1 root hub device descriptor */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
static const u8 usb11_rh_dev_descriptor[18] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x12, /* __u8 bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_DEVICE, /* __u8 bDescriptorType; Device */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x10, 0x01, /* __le16 bcdUSB; v1.1 */
0x09, /* __u8 bDeviceClass; HUB_CLASSCODE */
0x00, /* __u8 bDeviceSubClass; */
0x00, /* __u8 bDeviceProtocol; [ low/full speeds only ] */
[PATCH] USB: Fix maxpacket length for ep0 on root hubs This patch (as591) fixes a rather innocuous bug that has been around for quite a long time: Virtual root hubs should have a maxpacket length of 64 for endpoint 0. I didn't realize it was wrong until I started looking through the endpoint attribute files. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-25 02:41:19 +07:00
0x40, /* __u8 bMaxPacketSize0; 64 Bytes */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: make vendor id of root hubs greppable It took me surprisingly long to find the location where the Linux Foundation vendor id (0x1d6b) is set for the root hubs. A minor update to three comments makes those locations (trivially) greppable. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-05-05 18:16:51 +07:00
0x6b, 0x1d, /* __le16 idVendor; Linux Foundation 0x1d6b */
USB: use a real vendor and product id for root hubs Turns out that a company is out there using the vendor id of 0x0000 in the wild, so use a real vendor/product id for the root hubs. Now that the Linux Foundation has a real vendor id, we use that, and the first product id: 0x1d6b is the vendor id of the Linux Foundation 0x0001 is the product id for Linux 1.1 root hubs 0x0002 is the product id for Linux 2.0 root hubs The usb.ids file has already been updated with these values. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-29 00:50:12 +07:00
0x01, 0x00, /* __le16 idProduct; device 0x0001 */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
KERNEL_VER, KERNEL_REL, /* __le16 bcdDevice */
0x03, /* __u8 iManufacturer; */
0x02, /* __u8 iProduct; */
0x01, /* __u8 iSerialNumber; */
0x01 /* __u8 bNumConfigurations; */
};
/*-------------------------------------------------------------------------*/
/* Configuration descriptors for our root hubs */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
static const u8 fs_rh_config_descriptor[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* one configuration */
0x09, /* __u8 bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x19, 0x00, /* __le16 wTotalLength; */
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
0xc0, /* __u8 bmAttributes;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* USB 1.1:
* USB 2.0, single TT organization (mandatory):
* one interface, protocol 0
*
* USB 2.0, multiple TT organization (optional):
* two interfaces, protocols 1 (like single TT)
* and 2 (multiple TT mode) ... config is
* sometimes settable
* NOT IMPLEMENTED
*/
/* one interface */
0x09, /* __u8 if_bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x00, /* __u8 if_bInterfaceNumber; */
0x00, /* __u8 if_bAlternateSetting; */
0x01, /* __u8 if_bNumEndpoints; */
0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
0x00, /* __u8 if_bInterfaceSubClass; */
0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
0x00, /* __u8 if_iInterface; */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
0x03, /* __u8 ep_bmAttributes; Interrupt */
0x02, 0x00, /* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8) */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0xff /* __u8 ep_bInterval; (255ms -- usb 2.0 spec) */
};
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
static const u8 hs_rh_config_descriptor[] = {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* one configuration */
0x09, /* __u8 bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x19, 0x00, /* __le16 wTotalLength; */
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
0xc0, /* __u8 bmAttributes;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* USB 1.1:
* USB 2.0, single TT organization (mandatory):
* one interface, protocol 0
*
* USB 2.0, multiple TT organization (optional):
* two interfaces, protocols 1 (like single TT)
* and 2 (multiple TT mode) ... config is
* sometimes settable
* NOT IMPLEMENTED
*/
/* one interface */
0x09, /* __u8 if_bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x00, /* __u8 if_bInterfaceNumber; */
0x00, /* __u8 if_bAlternateSetting; */
0x01, /* __u8 if_bNumEndpoints; */
0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
0x00, /* __u8 if_bInterfaceSubClass; */
0x00, /* __u8 if_bInterfaceProtocol; [usb1.1 or single tt] */
0x00, /* __u8 if_iInterface; */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
0x03, /* __u8 ep_bmAttributes; Interrupt */
usb hub: fix root hub code so it takes more than 15 devices per root hub Wireless USB Host Controllers accept a large number of devices per host, which shows up as a large number of ports in its root hub. When the number of ports in a hub device goes over 16, the activation of the hub fails with the cryptic message in klogd. hub 2-0:1.0: activate --> -22 Following this further, it was seen that: hub_probe() hub_configure() generates pipe number pseudo allocates buffer 'maxp' bytes in size using usb_maxpacket() The endpoint descriptor for a root hub interrupt endpoint is declared in drivers/usb/core/hcd.c:hs_rh_config_descriptor and declares it to be size two (supporting 15 devices max). hub_activate() usb_hcd_submit_urb() rh_urb_enqueue() urb->pipe is neither int nor ctl, so it errors out rh_queue_status() Returns -EINVAL because the buffer length is smaller than the minimum needed to report all the hub port bits as in accordance with USB2.0[11.12.3]. There has to be trunc((PORTS + 1 + 7) / 8) bytes of space at least. Alan Stern confirmed that the reason for reading maxpktsize and not the right amount is because some hubs are known to return more data and thus cause overflow. So this patch simply changes the code to make the interrupt endpoint's max packet size be at least the minimum required by USB_MAXCHILDREN (instead of a fixed magic number) and add documentation for that. This way we are always ahead of the limit. Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-12 10:05:59 +07:00
/* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
* see hub.c:hub_configure() for details. */
(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
0x0c /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
};
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
static const u8 ss_rh_config_descriptor[] = {
/* one configuration */
0x09, /* __u8 bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_CONFIG, /* __u8 bDescriptorType; Configuration */
usb: Make USB 3.0 roothub have a SS EP comp descriptor. Make the USB 3.0 roothub registered by the USB core have a SuperSpeed Endpoint Companion Descriptor after the interrupt endpoint. All USB 3.0 devices are required to have this, and the USB 3.0 bus specification (section 10.13.1) says which values the descriptor should have. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-09-14 02:01:02 +07:00
0x1f, 0x00, /* __le16 wTotalLength; */
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
0x01, /* __u8 bNumInterfaces; (1) */
0x01, /* __u8 bConfigurationValue; */
0x00, /* __u8 iConfiguration; */
0xc0, /* __u8 bmAttributes;
Bit 7: must be set,
6: Self-powered,
5: Remote wakeup,
4..0: resvd */
0x00, /* __u8 MaxPower; */
/* one interface */
0x09, /* __u8 if_bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_INTERFACE, /* __u8 if_bDescriptorType; Interface */
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
0x00, /* __u8 if_bInterfaceNumber; */
0x00, /* __u8 if_bAlternateSetting; */
0x01, /* __u8 if_bNumEndpoints; */
0x09, /* __u8 if_bInterfaceClass; HUB_CLASSCODE */
0x00, /* __u8 if_bInterfaceSubClass; */
0x00, /* __u8 if_bInterfaceProtocol; */
0x00, /* __u8 if_iInterface; */
/* one endpoint (status change endpoint) */
0x07, /* __u8 ep_bLength; */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_ENDPOINT, /* __u8 ep_bDescriptorType; Endpoint */
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
0x81, /* __u8 ep_bEndpointAddress; IN Endpoint 1 */
0x03, /* __u8 ep_bmAttributes; Interrupt */
/* __le16 ep_wMaxPacketSize; 1 + (MAX_ROOT_PORTS / 8)
* see hub.c:hub_configure() for details. */
(USB_MAXCHILDREN + 1 + 7) / 8, 0x00,
usb: Make USB 3.0 roothub have a SS EP comp descriptor. Make the USB 3.0 roothub registered by the USB core have a SuperSpeed Endpoint Companion Descriptor after the interrupt endpoint. All USB 3.0 devices are required to have this, and the USB 3.0 bus specification (section 10.13.1) says which values the descriptor should have. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-09-14 02:01:02 +07:00
0x0c, /* __u8 ep_bInterval; (256ms -- usb 2.0 spec) */
/* one SuperSpeed endpoint companion descriptor */
0x06, /* __u8 ss_bLength */
usb: hcd: use USB_DT_* Fix using the bare numbers to set the 'bDescriptorType' descriptor fields while the values are #define'd in <linux/usb/ch9.h>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-05 01:11:35 +07:00
USB_DT_SS_ENDPOINT_COMP, /* __u8 ss_bDescriptorType; SuperSpeed EP */
/* Companion */
usb: Make USB 3.0 roothub have a SS EP comp descriptor. Make the USB 3.0 roothub registered by the USB core have a SuperSpeed Endpoint Companion Descriptor after the interrupt endpoint. All USB 3.0 devices are required to have this, and the USB 3.0 bus specification (section 10.13.1) says which values the descriptor should have. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-09-14 02:01:02 +07:00
0x00, /* __u8 ss_bMaxBurst; allows 1 TX between ACKs */
0x00, /* __u8 ss_bmAttributes; 1 packet per service interval */
0x02, 0x00 /* __le16 ss_wBytesPerInterval; 15 bits for max 15 ports */
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
};
USB: Add "authorized_default" parameter to the usbcore module The "authorized_default" module parameter of usbcore controls the default for the authorized_default variable of each USB host controller. -1 is authorized for all devices except wireless (default, old behaviour) 0 is unauthorized for all devices 1 is authorized for all devices Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-01 02:31:08 +07:00
/* authorized_default behaviour:
* -1 is authorized for all devices except wireless (old behaviour)
* 0 is unauthorized for all devices
* 1 is authorized for all devices
usb: core: add option of only authorizing internal devices On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-17 14:21:51 +07:00
* 2 is authorized for internal devices
USB: Add "authorized_default" parameter to the usbcore module The "authorized_default" module parameter of usbcore controls the default for the authorized_default variable of each USB host controller. -1 is authorized for all devices except wireless (default, old behaviour) 0 is unauthorized for all devices 1 is authorized for all devices Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-01 02:31:08 +07:00
*/
usb: core: add option of only authorizing internal devices On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-17 14:21:51 +07:00
#define USB_AUTHORIZE_WIRED -1
#define USB_AUTHORIZE_NONE 0
#define USB_AUTHORIZE_ALL 1
#define USB_AUTHORIZE_INTERNAL 2
static int authorized_default = USB_AUTHORIZE_WIRED;
USB: Add "authorized_default" parameter to the usbcore module The "authorized_default" module parameter of usbcore controls the default for the authorized_default variable of each USB host controller. -1 is authorized for all devices except wireless (default, old behaviour) 0 is unauthorized for all devices 1 is authorized for all devices Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-06-01 02:31:08 +07:00
module_param(authorized_default, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(authorized_default,
"Default USB device authorization: 0 is not authorized, 1 is "
usb: core: add option of only authorizing internal devices On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-17 14:21:51 +07:00
"authorized, 2 is authorized for internal devices, -1 is "
usb: core: Fix typo in description of "authorized_default" Add missing right parenthesis. Signed-off-by: Jakub Wilk <jwilk@jwilk.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-28 00:52:39 +07:00
"authorized except for wireless USB (default, old behaviour)");
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
/**
* ascii2desc() - Helper routine for producing UTF-16LE string descriptors
* @s: Null-terminated ASCII (actually ISO-8859-1) string
* @buf: Buffer for USB string descriptor (header + UTF-16LE)
* @len: Length (in bytes; may be odd) of descriptor buffer.
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Return: The number of bytes filled in: 2 + 2*strlen(s) or @len,
* whichever is less.
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Note:
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
* USB String descriptors can contain at most 126 characters; input
* strings longer than that are truncated.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
static unsigned
ascii2desc(char const *s, u8 *buf, unsigned len)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
unsigned n, t = 2 + 2*strlen(s);
if (t > 254)
t = 254; /* Longest possible UTF string descriptor */
if (len > t)
len = t;
t += USB_DT_STRING << 8; /* Now t is first 16 bits to store */
n = len;
while (n--) {
*buf++ = t;
if (!n--)
break;
*buf++ = t >> 8;
t = (unsigned char)*s++;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
return len;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
/**
* rh_string() - provides string descriptors for root hub
* @id: the string ID number (0: langids, 1: serial #, 2: product, 3: vendor)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
* @hcd: the host controller for this root hub
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
* @data: buffer for output packet
* @len: length of the provided buffer
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*
* Produces either a manufacturer, product or serial number string for the
* virtual root hub device.
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
*
* Return: The number of bytes filled in: the length of the descriptor or
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
* of the provided buffer, whichever is less.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
static unsigned
rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len)
USB: more u32 conversion after transfer_buffer_length and actual_length transfer_buffer_length and actual_length have become unsigned, therefore some additional conversion of local variables, function arguments and print specifications is desired. A test for a negative urb->transfer_buffer_length became obsolete; instead we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always less than urb->transfer_buffer_length. rh_string() does no longer return -EPIPE in the case of an unsupported ID. Instead its only caller, rh_call_control() does the check. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 18:19:18 +07:00
{
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
char buf[100];
char const *s;
static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04};
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
drivers: usb: core: hcd: replaced C99 // comments Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:08 +07:00
/* language ids */
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
switch (id) {
case 0:
/* Array of LANGID codes (0x0409 is MSFT-speak for "en-us") */
/* See http://www.usb.org/developers/docs/USB_LANGIDs.pdf */
if (len > 4)
len = 4;
memcpy(data, langids, len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return len;
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
case 1:
/* Serial number */
s = hcd->self.bus_name;
break;
case 2:
/* Product name */
s = hcd->product_desc;
break;
case 3:
/* Manufacturer */
[PATCH] namespaces: utsname: use init_utsname when appropriate In some places, particularly drivers and __init code, the init utsns is the appropriate one to use. This patch replaces those with a the init_utsname helper. Changes: Removed several uses of init_utsname(). Hope I picked all the right ones in net/ipv4/ipconfig.c. These are now changed to utsname() (the per-process namespace utsname) in the previous patch (2/7) [akpm@osdl.org: CIFS fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-02 16:18:13 +07:00
snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname,
init_utsname()->release, hcd->driver->description);
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
s = buf;
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
default:
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
/* Can't happen; caller guarantees it */
return 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: Clean up root hub string descriptors The previous code had a bug that would add a trailing null byte to the returned descriptor. Signed-off-by: George Spelvin <linux@horizon.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-08-25 09:06:41 +07:00
return ascii2desc(s, data, len);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
/* Root hub control transfers execute synchronously */
static int rh_call_control (struct usb_hcd *hcd, struct urb *urb)
{
struct usb_ctrlrequest *cmd;
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
u16 typeReq, wValue, wIndex, wLength;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
u8 *ubuf = urb->transfer_buffer;
USB: more u32 conversion after transfer_buffer_length and actual_length transfer_buffer_length and actual_length have become unsigned, therefore some additional conversion of local variables, function arguments and print specifications is desired. A test for a negative urb->transfer_buffer_length became obsolete; instead we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always less than urb->transfer_buffer_length. rh_string() does no longer return -EPIPE in the case of an unsupported ID. Instead its only caller, rh_call_control() does the check. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 18:19:18 +07:00
unsigned len = 0;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
int status;
USB: root hubs don't lie about their number of TTs Currently EHCI root hubs enumerate with a bDeviceProtocol code indicating that they possess a Transaction Translator. However the vast majority of controllers do not; they rely on a companion controller to handle full- and low-speed communications. This patch (as1064) changes the root-hub device descriptor to match the actual situation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-04 05:02:56 +07:00
u8 patch_wakeup = 0;
u8 patch_protocol = 0;
usb: rh_call_control tbuf overflow fix rh_call_control() contains a buffer, tbuf, which it uses to hold USB descriptors. These discriptors are eventually copied into the transfer_buffer in the URB. The buffer in the URB is dynamically defined and is always large enough to hold the amount of data it requests. tbuf is currently statically allocated on the stack with a size of 15 bytes, regardless of the size specified in the URB. This patch dynamically allocates tbuf, and ensures that tbuf is at least as big as the buffer in the URB. If an hcd attempts to write a descriptor containing more than 15 bytes ( such as the Standard BOS Descriptor for hubs, defined in the USB3.0 Spec, section 10.13.1 ) the write would overflow the buffer and corrupt the stack. This patch addresses this behavior. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 00:36:12 +07:00
u16 tbuf_size;
u8 *tbuf = NULL;
const u8 *bufp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
might_sleep();
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
spin_lock_irq(&hcd_root_hub_lock);
status = usb_hcd_link_urb_to_ep(hcd, urb);
spin_unlock_irq(&hcd_root_hub_lock);
if (status)
return status;
USB: centralize -EREMOTEIO handling This patch (as969) continues the ongoing changes to the way HCDs report URB statuses. The programming interface has been simplified by making usbcore responsible for clearing urb->hcpriv and for setting -EREMOTEIO status when an URB with the URB_SHORT_NOT_OK flag ends up as a short transfer. By moving the work out of the HCDs, this removes a fair amount of repeated code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:39:21 +07:00
urb->hcpriv = hcd; /* Indicate it's queued */
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
cmd = (struct usb_ctrlrequest *) urb->setup_packet;
typeReq = (cmd->bRequestType << 8) | cmd->bRequest;
wValue = le16_to_cpu (cmd->wValue);
wIndex = le16_to_cpu (cmd->wIndex);
wLength = le16_to_cpu (cmd->wLength);
if (wLength > urb->transfer_buffer_length)
goto error;
usb: rh_call_control tbuf overflow fix rh_call_control() contains a buffer, tbuf, which it uses to hold USB descriptors. These discriptors are eventually copied into the transfer_buffer in the URB. The buffer in the URB is dynamically defined and is always large enough to hold the amount of data it requests. tbuf is currently statically allocated on the stack with a size of 15 bytes, regardless of the size specified in the URB. This patch dynamically allocates tbuf, and ensures that tbuf is at least as big as the buffer in the URB. If an hcd attempts to write a descriptor containing more than 15 bytes ( such as the Standard BOS Descriptor for hubs, defined in the USB3.0 Spec, section 10.13.1 ) the write would overflow the buffer and corrupt the stack. This patch addresses this behavior. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 00:36:12 +07:00
/*
* tbuf should be at least as big as the
* USB hub descriptor.
*/
tbuf_size = max_t(u16, sizeof(struct usb_hub_descriptor), wLength);
tbuf = kzalloc(tbuf_size, GFP_KERNEL);
USB: fix linked-list corruption in rh_call_control() Using KASAN, Dmitry found a bug in the rh_call_control() routine: If buffer allocation fails, the routine returns immediately without unlinking its URB from the control endpoint, eventually leading to linked-list corruption. This patch fixes the problem by jumping to the end of the routine (where the URB is unlinked) when an allocation failure occurs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-25 00:38:28 +07:00
if (!tbuf) {
status = -ENOMEM;
goto err_alloc;
}
usb: rh_call_control tbuf overflow fix rh_call_control() contains a buffer, tbuf, which it uses to hold USB descriptors. These discriptors are eventually copied into the transfer_buffer in the URB. The buffer in the URB is dynamically defined and is always large enough to hold the amount of data it requests. tbuf is currently statically allocated on the stack with a size of 15 bytes, regardless of the size specified in the URB. This patch dynamically allocates tbuf, and ensures that tbuf is at least as big as the buffer in the URB. If an hcd attempts to write a descriptor containing more than 15 bytes ( such as the Standard BOS Descriptor for hubs, defined in the USB3.0 Spec, section 10.13.1 ) the write would overflow the buffer and corrupt the stack. This patch addresses this behavior. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 00:36:12 +07:00
bufp = tbuf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
urb->actual_length = 0;
switch (typeReq) {
/* DEVICE REQUESTS */
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 23:40:27 +07:00
/* The root hub's remote wakeup enable bit is implemented using
* driver model wakeup flags. If this system supports wakeup
* through USB, userspace may change the default "allow wakeup"
* policy through sysfs or these calls.
*
* Most root hubs support wakeup from downstream devices, for
* runtime power management (disabling USB clocks and reducing
* VBUS power usage). However, not all of them do so; silicon,
* board, and BIOS bugs here are not uncommon, so these can't
* be treated quite like external hubs.
*
* Likewise, not all root hubs will pass wakeup events upstream,
* to wake up the whole system. So don't assume root hub and
* controller capabilities are identical.
*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
case DeviceRequest | USB_REQ_GET_STATUS:
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
tbuf[0] = (device_may_wakeup(&hcd->self.root_hub->dev)
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 23:40:27 +07:00
<< USB_DEVICE_REMOTE_WAKEUP)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
| (1 << USB_DEVICE_SELF_POWERED);
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
tbuf[1] = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
len = 2;
break;
case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
if (wValue == USB_DEVICE_REMOTE_WAKEUP)
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 23:40:27 +07:00
device_set_wakeup_enable(&hcd->self.root_hub->dev, 0);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
else
goto error;
break;
case DeviceOutRequest | USB_REQ_SET_FEATURE:
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 23:40:27 +07:00
if (device_can_wakeup(&hcd->self.root_hub->dev)
&& wValue == USB_DEVICE_REMOTE_WAKEUP)
device_set_wakeup_enable(&hcd->self.root_hub->dev, 1);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
else
goto error;
break;
case DeviceRequest | USB_REQ_GET_CONFIGURATION:
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
tbuf[0] = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
len = 1;
/* FALLTHROUGH */
case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
break;
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
switch (wValue & 0xff00) {
case USB_DT_DEVICE << 8:
usb: Store bus type in usb_hcd, not in driver flags. The xHCI driver essentially has both a USB 2.0 and a USB 3.0 roothub. So setting the HCD_USB3 bits in the hcd->driver->flags is a bit misleading. Add a new field to usb_hcd, bcdUSB. Store the result of hcd->driver->flags & HCD_MASK in it. Later, when we have the xHCI driver register the two roothubs, we'll set the usb_hcd->bcdUSB field to HCD_USB2 for the USB 2.0 roothub, and HCD_USB3 for the USB 3.0 roothub. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-12-03 05:45:18 +07:00
switch (hcd->speed) {
usb: define HCD_USB32 speed option for hosts that support USB 3.2 dual-lane Hosts that support USB 3.2 Enhaned SuperSpeed can set their hcd speed to HCD_USB32 to let usb core and host drivers know that the controller supports new USB 3.2 dual-lane features. make sure usb core handle HCD_USB32 hosts correctly, for now similar to HCD_USB32. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 23:05:50 +07:00
case HCD_USB32:
usb: define HCD_USB31 speed option for hosts that support USB 3.1 features Hosts that support USB 3.1 Enhaned SuperSpeed can set their speed to HCD_USB31 to let usb core and host drivers know that the controller supports new USB 3.1 features. make sure usb core handle HCD_USB31 hosts correctly, for now similar to HCD_USB3. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01 22:40:37 +07:00
case HCD_USB31:
usb: add device descriptor for usb 3.1 root hub Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-10 14:59:28 +07:00
bufp = usb31_rh_dev_descriptor;
break;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
case HCD_USB3:
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
bufp = usb3_rh_dev_descriptor;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
break;
Allow the USB HCD to create Wireless USB root hubs This patch adds Wireless USB root hub support to the USB HCD. It allows the HWA to create its root hub which previously failed because the HCD treated wireless root hubs the same as USB2 high speed hubs. The creation of the root hub would fail in that case due to lack of TTs which wireless root hubs do not support. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-01 02:16:13 +07:00
case HCD_USB25:
bufp = usb25_rh_dev_descriptor;
break;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
case HCD_USB2:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bufp = usb2_rh_dev_descriptor;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
break;
case HCD_USB11:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bufp = usb11_rh_dev_descriptor;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
break;
default:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
goto error;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
len = 18;
USB: root hubs don't lie about their number of TTs Currently EHCI root hubs enumerate with a bDeviceProtocol code indicating that they possess a Transaction Translator. However the vast majority of controllers do not; they rely on a companion controller to handle full- and low-speed communications. This patch (as1064) changes the root-hub device descriptor to match the actual situation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-04 05:02:56 +07:00
if (hcd->has_tt)
patch_protocol = 1;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
case USB_DT_CONFIG << 8:
usb: Store bus type in usb_hcd, not in driver flags. The xHCI driver essentially has both a USB 2.0 and a USB 3.0 roothub. So setting the HCD_USB3 bits in the hcd->driver->flags is a bit misleading. Add a new field to usb_hcd, bcdUSB. Store the result of hcd->driver->flags & HCD_MASK in it. Later, when we have the xHCI driver register the two roothubs, we'll set the usb_hcd->bcdUSB field to HCD_USB2 for the USB 2.0 roothub, and HCD_USB3 for the USB 3.0 roothub. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-12-03 05:45:18 +07:00
switch (hcd->speed) {
usb: define HCD_USB32 speed option for hosts that support USB 3.2 dual-lane Hosts that support USB 3.2 Enhaned SuperSpeed can set their hcd speed to HCD_USB32 to let usb core and host drivers know that the controller supports new USB 3.2 dual-lane features. make sure usb core handle HCD_USB32 hosts correctly, for now similar to HCD_USB32. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 23:05:50 +07:00
case HCD_USB32:
usb: define HCD_USB31 speed option for hosts that support USB 3.1 features Hosts that support USB 3.1 Enhaned SuperSpeed can set their speed to HCD_USB31 to let usb core and host drivers know that the controller supports new USB 3.1 features. make sure usb core handle HCD_USB31 hosts correctly, for now similar to HCD_USB3. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01 22:40:37 +07:00
case HCD_USB31:
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
case HCD_USB3:
USB: Add USB 3.0 roothub support to USB core. Add USB 3.0 root hub descriptors. This is a kludge because I reused the old USB 2.0 descriptors, instead of using the new USB 3.0 hub descriptors with endpoint companion descriptors and other descriptors. I did this because I wasn't ready to add USB 3.0 hub changes to khubd. For now, a USB 3.0 roothub looks like a USB 2.0 roothub, with a higher speed. USB 3.0 hubs have no transaction translator (TT). Make USB core debugging handle super speed ports. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:55:01 +07:00
bufp = ss_rh_config_descriptor;
len = sizeof ss_rh_config_descriptor;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
break;
Allow the USB HCD to create Wireless USB root hubs This patch adds Wireless USB root hub support to the USB HCD. It allows the HWA to create its root hub which previously failed because the HCD treated wireless root hubs the same as USB2 high speed hubs. The creation of the root hub would fail in that case due to lack of TTs which wireless root hubs do not support. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-01 02:16:13 +07:00
case HCD_USB25:
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
case HCD_USB2:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bufp = hs_rh_config_descriptor;
len = sizeof hs_rh_config_descriptor;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
break;
case HCD_USB11:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
bufp = fs_rh_config_descriptor;
len = sizeof fs_rh_config_descriptor;
USB: xhci: replace if-elseif-else with switch-case Replace if-elseif-else with switch-case to keep the code consistent which is semantically same Switch-case is used here, http://www.spinics.net/lists/linux-usb/msg17201.html Making consistent at other places in usb/core Also easier to read and maintain when USB4.0, 5.0, ... comes Signed-off-by: Viral Mehta <viral.mehta@einfochips.com> Tested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-05-05 17:24:23 +07:00
break;
default:
goto error;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 23:40:27 +07:00
if (device_can_wakeup(&hcd->self.root_hub->dev))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
patch_wakeup = 1;
break;
case USB_DT_STRING << 8:
USB: more u32 conversion after transfer_buffer_length and actual_length transfer_buffer_length and actual_length have become unsigned, therefore some additional conversion of local variables, function arguments and print specifications is desired. A test for a negative urb->transfer_buffer_length became obsolete; instead we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always less than urb->transfer_buffer_length. rh_string() does no longer return -EPIPE in the case of an unsupported ID. Instead its only caller, rh_call_control() does the check. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 18:19:18 +07:00
if ((wValue & 0xff) < 4)
urb->actual_length = rh_string(wValue & 0xff,
hcd, ubuf, wLength);
else /* unsupported IDs --> "protocol stall" */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
goto error;
break;
xHCI/USB: Make xHCI driver have a BOS descriptor. To add USB 3.0 link power management (LPM), we need to know what the U1 and U2 exit latencies are for the xHCI host controller. External USB 3.0 hubs report these values through the SuperSpeed Capabilities descriptor in the BOS descriptor. Make the USB 3.0 roothub for the xHCI host behave like an external hub and return the BOS descriptors. The U1 and U2 exit latencies will vary across each host controller, so we need to dynamically fill those values in by reading the exit latencies out of the xHC registers. Make the roothub code in the USB core handle hub_control() returning the length of the data copied. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-07 01:54:23 +07:00
case USB_DT_BOS << 8:
goto nongeneric;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
default:
goto error;
}
break;
case DeviceRequest | USB_REQ_GET_INTERFACE:
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
tbuf[0] = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
len = 1;
/* FALLTHROUGH */
case DeviceOutRequest | USB_REQ_SET_INTERFACE:
break;
case DeviceOutRequest | USB_REQ_SET_ADDRESS:
drivers: usb: core: hcd: replaced C99 // comments Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:08 +07:00
/* wValue == urb->dev->devaddr */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
dev_dbg (hcd->self.controller, "root hub device address %d\n",
wValue);
break;
/* INTERFACE REQUESTS (no defined feature/status flags) */
/* ENDPOINT REQUESTS */
case EndpointRequest | USB_REQ_GET_STATUS:
drivers: usb: core: hcd: replaced C99 // comments Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:08 +07:00
/* ENDPOINT_HALT flag */
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
tbuf[0] = 0;
tbuf[1] = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
len = 2;
/* FALLTHROUGH */
case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
case EndpointOutRequest | USB_REQ_SET_FEATURE:
dev_dbg (hcd->self.controller, "no endpoint features yet\n");
break;
/* CLASS REQUESTS (and errors) */
default:
xHCI/USB: Make xHCI driver have a BOS descriptor. To add USB 3.0 link power management (LPM), we need to know what the U1 and U2 exit latencies are for the xHCI host controller. External USB 3.0 hubs report these values through the SuperSpeed Capabilities descriptor in the BOS descriptor. Make the USB 3.0 roothub for the xHCI host behave like an external hub and return the BOS descriptors. The U1 and U2 exit latencies will vary across each host controller, so we need to dynamically fill those values in by reading the exit latencies out of the xHC registers. Make the roothub code in the USB core handle hub_control() returning the length of the data copied. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-07 01:54:23 +07:00
nongeneric:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* non-generic request */
[PATCH] updates for "controller suspended" handling Reject URBs to _all_ devices when their host controllers are suspended; even root hub registers will be unavailable. Also, don't reject urbs to root hubs in other cases; the only upstream link is through that controller (on PCI or whatever SOC bus is in use). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-)
2005-09-28 00:38:54 +07:00
switch (typeReq) {
case GetHubStatus:
len = 4;
break;
usb: Support USB 3.1 extended port status request usb 3.1 extend the hub get-port-status request by adding different request types. the new request types return 4 additional bytes called extended port status, these bytes are returned after the regular portstatus and portchange values. The extended port status contains a speed ID for the currently used sublink speed. A table of supported Speed IDs with details about the link is provided by the hub in the device descriptor BOS SuperSpeedPlus device capability Sublink Speed Attributes. Support this new request. Ask for the extended port status after port reset if hub supports USB 3.1. If link is running at SuperSpeedPlus set the device speed to USB_SPEED_SUPER_PLUS Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-10 14:59:29 +07:00
case GetPortStatus:
if (wValue == HUB_PORT_STATUS)
len = 4;
else
/* other port status types return 8 bytes */
len = 8;
break;
[PATCH] updates for "controller suspended" handling Reject URBs to _all_ devices when their host controllers are suspended; even root hub registers will be unavailable. Also, don't reject urbs to root hubs in other cases; the only upstream link is through that controller (on PCI or whatever SOC bus is in use). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-)
2005-09-28 00:38:54 +07:00
case GetHubDescriptor:
len = sizeof (struct usb_hub_descriptor);
break;
xHCI/USB: Make xHCI driver have a BOS descriptor. To add USB 3.0 link power management (LPM), we need to know what the U1 and U2 exit latencies are for the xHCI host controller. External USB 3.0 hubs report these values through the SuperSpeed Capabilities descriptor in the BOS descriptor. Make the USB 3.0 roothub for the xHCI host behave like an external hub and return the BOS descriptors. The U1 and U2 exit latencies will vary across each host controller, so we need to dynamically fill those values in by reading the exit latencies out of the xHC registers. Make the roothub code in the USB core handle hub_control() returning the length of the data copied. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-07 01:54:23 +07:00
case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
/* len is returned by hub_control */
break;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[PATCH] updates for "controller suspended" handling Reject URBs to _all_ devices when their host controllers are suspended; even root hub registers will be unavailable. Also, don't reject urbs to root hubs in other cases; the only upstream link is through that controller (on PCI or whatever SOC bus is in use). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-)
2005-09-28 00:38:54 +07:00
status = hcd->driver->hub_control (hcd,
typeReq, wValue, wIndex,
tbuf, wLength);
USB: Set usb port's DeviceRemovable according acpi information ACPI provide "_PLD" and "_UPC" aml methods to describe usb port visibility and connectability. This patch is to add usb_hub_adjust_DeviceRemovable() to adjust usb hub port's DeviceRemovable according ACPI information and invoke it in the rh_call_control(). When hub descriptor request is issued at first time, usb port device isn't created and usb port is not bound with acpi. So first hub descriptor request is not changed based on ACPI information. After usb port devices being created, call usb_hub_adjust_DeviceRemovable in the hub_configure() and then set hub port's DeviceRemovable according ACPI information and this also works for non-root hub. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-21 21:18:00 +07:00
if (typeReq == GetHubDescriptor)
usb_hub_adjust_deviceremovable(hcd->self.root_hub,
(struct usb_hub_descriptor *)tbuf);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
break;
error:
/* "protocol stall" on error */
status = -EPIPE;
}
xHCI/USB: Make xHCI driver have a BOS descriptor. To add USB 3.0 link power management (LPM), we need to know what the U1 and U2 exit latencies are for the xHCI host controller. External USB 3.0 hubs report these values through the SuperSpeed Capabilities descriptor in the BOS descriptor. Make the USB 3.0 roothub for the xHCI host behave like an external hub and return the BOS descriptors. The U1 and U2 exit latencies will vary across each host controller, so we need to dynamically fill those values in by reading the exit latencies out of the xHC registers. Make the roothub code in the USB core handle hub_control() returning the length of the data copied. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-07 01:54:23 +07:00
if (status < 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
len = 0;
if (status != -EPIPE) {
dev_dbg (hcd->self.controller,
"CTRL: TypeReq=0x%x val=0x%x "
"idx=0x%x len=%d ==> %d\n",
typeReq, wValue, wIndex,
[PATCH] updates for "controller suspended" handling Reject URBs to _all_ devices when their host controllers are suspended; even root hub registers will be unavailable. Also, don't reject urbs to root hubs in other cases; the only upstream link is through that controller (on PCI or whatever SOC bus is in use). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 28 ++++++++++++---------------- drivers/usb/core/urb.c | 3 ++- 2 files changed, 14 insertions(+), 17 deletions(-)
2005-09-28 00:38:54 +07:00
wLength, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
xHCI/USB: Make xHCI driver have a BOS descriptor. To add USB 3.0 link power management (LPM), we need to know what the U1 and U2 exit latencies are for the xHCI host controller. External USB 3.0 hubs report these values through the SuperSpeed Capabilities descriptor in the BOS descriptor. Make the USB 3.0 roothub for the xHCI host behave like an external hub and return the BOS descriptors. The U1 and U2 exit latencies will vary across each host controller, so we need to dynamically fill those values in by reading the exit latencies out of the xHC registers. Make the roothub code in the USB core handle hub_control() returning the length of the data copied. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-10-07 01:54:23 +07:00
} else if (status > 0) {
/* hub_control may return the length of data copied. */
len = status;
status = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
if (len) {
if (urb->transfer_buffer_length < len)
len = urb->transfer_buffer_length;
urb->actual_length = len;
drivers: usb: core: hcd: replaced C99 // comments Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:08 +07:00
/* always USB_DIR_IN, toward host */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
memcpy (ubuf, bufp, len);
/* report whether RH hardware supports remote wakeup */
if (patch_wakeup &&
len > offsetof (struct usb_config_descriptor,
bmAttributes))
((struct usb_config_descriptor *)ubuf)->bmAttributes
|= USB_CONFIG_ATT_WAKEUP;
USB: root hubs don't lie about their number of TTs Currently EHCI root hubs enumerate with a bDeviceProtocol code indicating that they possess a Transaction Translator. However the vast majority of controllers do not; they rely on a companion controller to handle full- and low-speed communications. This patch (as1064) changes the root-hub device descriptor to match the actual situation. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-04 05:02:56 +07:00
/* report whether RH hardware has an integrated TT */
if (patch_protocol &&
len > offsetof(struct usb_device_descriptor,
bDeviceProtocol))
((struct usb_device_descriptor *) ubuf)->
USB: Adding #define in hub_configure() and hcd.c file This patch is in succession of previous patch commit c8421147926fcacf53081a36438a0bed394da9f5 xHCI: Adding #define values used for hub descriptor Hub descriptors characteristics #defines values are added in hub_configure() in place of magic numbers as asked by Alan Stern. And the indentation for switch and case is changed to be same. Some #defines values are added in ch11.h for defining hub class protocols and used in hub.c and hcd.c in which magic values were used for hub class protocols. Signed-off-by: Aman Deep <amandeep3986@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-08 13:35:22 +07:00
bDeviceProtocol = USB_HUB_PR_HS_SINGLE_TT;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
usb: rh_call_control tbuf overflow fix rh_call_control() contains a buffer, tbuf, which it uses to hold USB descriptors. These discriptors are eventually copied into the transfer_buffer in the URB. The buffer in the URB is dynamically defined and is always large enough to hold the amount of data it requests. tbuf is currently statically allocated on the stack with a size of 15 bytes, regardless of the size specified in the URB. This patch dynamically allocates tbuf, and ensures that tbuf is at least as big as the buffer in the URB. If an hcd attempts to write a descriptor containing more than 15 bytes ( such as the Standard BOS Descriptor for hubs, defined in the USB3.0 Spec, section 10.13.1 ) the write would overflow the buffer and corrupt the stack. This patch addresses this behavior. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 00:36:12 +07:00
kfree(tbuf);
USB: fix linked-list corruption in rh_call_control() Using KASAN, Dmitry found a bug in the rh_call_control() routine: If buffer allocation fails, the routine returns immediately without unlinking its URB from the control endpoint, eventually leading to linked-list corruption. This patch fixes the problem by jumping to the end of the routine (where the URB is unlinked) when an allocation failure occurs. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-25 00:38:28 +07:00
err_alloc:
usb: rh_call_control tbuf overflow fix rh_call_control() contains a buffer, tbuf, which it uses to hold USB descriptors. These discriptors are eventually copied into the transfer_buffer in the URB. The buffer in the URB is dynamically defined and is always large enough to hold the amount of data it requests. tbuf is currently statically allocated on the stack with a size of 15 bytes, regardless of the size specified in the URB. This patch dynamically allocates tbuf, and ensures that tbuf is at least as big as the buffer in the URB. If an hcd attempts to write a descriptor containing more than 15 bytes ( such as the Standard BOS Descriptor for hubs, defined in the USB3.0 Spec, section 10.13.1 ) the write would overflow the buffer and corrupt the stack. This patch addresses this behavior. Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Sean O. Stalley <sean.stalley@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-14 00:36:12 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* any errors get returned through the urb completion */
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
spin_lock_irq(&hcd_root_hub_lock);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
usb_hcd_unlink_urb_from_ep(hcd, urb);
USB: Eliminate urb->status usage! This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 02:42:24 +07:00
usb_hcd_giveback_urb(hcd, urb, status);
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
spin_unlock_irq(&hcd_root_hub_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
}
/*-------------------------------------------------------------------------*/
/*
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
* Root Hub interrupt transfers are polled using a timer if the
* driver requests it; otherwise the driver is responsible for
* calling usb_hcd_poll_rh_status() when an event occurs.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
* Completions are called in_interrupt(), but they may or may not
* be in_irq().
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
void usb_hcd_poll_rh_status(struct usb_hcd *hcd)
{
struct urb *urb;
int length;
unsigned long flags;
Remove multiple KERN_ prefixes from printk formats Commit 5fd29d6ccbc98884569d6f3105aeca70858b3e0f ("printk: clean up handling of log-levels and newlines") changed printk semantics. printk lines with multiple KERN_<level> prefixes are no longer emitted as before the patch. <level> is now included in the output on each additional use. Remove all uses of multiple KERN_<level>s in formats. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-07 03:05:40 +07:00
char buffer[6]; /* Any root hubs with > 31 ports? */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
if (unlikely(!hcd->rh_pollable))
USB: fix race in HCD removal This patch (as865) fixes a race in the HCD removal code discovered by Milan Plzik. Arrival of an interrupt after the root hub was unregistered could cause the root-hub status timer to start up, even after it was supposed to have been shut down. The problem is fixed by moving the del_timer_sync() call to after the HCD's stop() method, at which time IRQ generation should be disabled. Cc: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-13 22:10:52 +07:00
return;
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
if (!hcd->uses_new_polling && !hcd->status_urb)
return;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
length = hcd->driver->hub_status_data(hcd, buffer);
if (length > 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
/* try to complete the status urb */
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
spin_lock_irqsave(&hcd_root_hub_lock, flags);
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
urb = hcd->status_urb;
if (urb) {
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
clear_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
hcd->status_urb = NULL;
urb->actual_length = length;
memcpy(urb->transfer_buffer, buffer, length);
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
usb_hcd_unlink_urb_from_ep(hcd, urb);
USB: Eliminate urb->status usage! This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 02:42:24 +07:00
usb_hcd_giveback_urb(hcd, urb, 0);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
} else {
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
length = 0;
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
set_bit(HCD_FLAG_POLL_PENDING, &hcd->flags);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
}
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
/* The USB 2.0 spec says 256 ms. This is close enough and won't
USB: Patch to align the various USB timers to fire at the same time This patch modifies the USB regular 250ms timer to be "perfectly aligned" to the second and quarters thereof. This change is there to make sure that if you have multiple USB ports, the timers for all these ports will fire at the same time rather than all spread out. All spread out wakes the CPU up from power saving idle a lot more than needed... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-23 02:42:56 +07:00
* exceed that limit if HZ is 100. The math is more clunky than
* maybe expected, this is to make sure that all timers for USB devices
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 08:57:33 +07:00
* fire at the same time to give the CPU a break in between */
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
if (hcd->uses_new_polling ? HCD_POLL_RH(hcd) :
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
(length == 0 && hcd->status_urb != NULL))
USB: Patch to align the various USB timers to fire at the same time This patch modifies the USB regular 250ms timer to be "perfectly aligned" to the second and quarters thereof. This change is there to make sure that if you have multiple USB ports, the timers for all these ports will fire at the same time rather than all spread out. All spread out wakes the CPU up from power saving idle a lot more than needed... Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-23 02:42:56 +07:00
mod_timer (&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/* timer callback */
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-17 04:43:17 +07:00
static void rh_timer_func (struct timer_list *t)
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
{
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-17 04:43:17 +07:00
struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer);
usb_hcd_poll_rh_status(_hcd);
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
}
/*-------------------------------------------------------------------------*/
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
int retval;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
unsigned long flags;
USB: more u32 conversion after transfer_buffer_length and actual_length transfer_buffer_length and actual_length have become unsigned, therefore some additional conversion of local variables, function arguments and print specifications is desired. A test for a negative urb->transfer_buffer_length became obsolete; instead we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always less than urb->transfer_buffer_length. rh_string() does no longer return -EPIPE in the case of an unsupported ID. Instead its only caller, rh_call_control() does the check. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-03-13 18:19:18 +07:00
unsigned len = 1 + (urb->dev->maxchild / 8);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
spin_lock_irqsave (&hcd_root_hub_lock, flags);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
if (hcd->status_urb || urb->transfer_buffer_length < len) {
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
dev_dbg (hcd->self.controller, "not queuing rh status urb\n");
retval = -EINVAL;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
goto done;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
retval = usb_hcd_link_urb_to_ep(hcd, urb);
if (retval)
goto done;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
hcd->status_urb = urb;
urb->hcpriv = hcd; /* indicate it's queued */
if (!hcd->uses_new_polling)
mod_timer(&hcd->rh_timer, (jiffies/(HZ/4) + 1) * (HZ/4));
/* If a status change has already occurred, report it ASAP */
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
else if (HCD_POLL_PENDING(hcd))
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
mod_timer(&hcd->rh_timer, jiffies);
retval = 0;
done:
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
return retval;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
static int rh_urb_enqueue (struct usb_hcd *hcd, struct urb *urb)
{
USB: avoid using urb->pipe in usbcore This patch (as946) eliminates many of the uses of urb->pipe in usbcore. Unfortunately there will have to be a significant API change, affecting all USB drivers, before we can remove it entirely. This patch contents itself with changing only the interface to usb_buffer_map_sg() and friends: The pipe argument is replaced with a direction flag. That can be done easily because those routines get used in only one place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 04:07:21 +07:00
if (usb_endpoint_xfer_int(&urb->ep->desc))
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
return rh_queue_status (hcd, urb);
USB: avoid using urb->pipe in usbcore This patch (as946) eliminates many of the uses of urb->pipe in usbcore. Unfortunately there will have to be a significant API change, affecting all USB drivers, before we can remove it entirely. This patch contents itself with changing only the interface to usb_buffer_map_sg() and friends: The pipe argument is replaced with a direction flag. That can be done easily because those routines get used in only one place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 04:07:21 +07:00
if (usb_endpoint_xfer_control(&urb->ep->desc))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return rh_call_control (hcd, urb);
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
return -EINVAL;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
/*-------------------------------------------------------------------------*/
usbcore: make hcd_endpoint_disable wait for queue to drain The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-12 03:01:45 +07:00
/* Unlinks of root-hub control URBs are legal, but they don't do anything
* since these URBs always execute synchronously.
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
*/
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
usbcore: make hcd_endpoint_disable wait for queue to drain The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-12 03:01:45 +07:00
unsigned long flags;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
int rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
spin_lock_irqsave(&hcd_root_hub_lock, flags);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
rc = usb_hcd_check_unlink_urb(hcd, urb, status);
if (rc)
goto done;
USB: avoid using urb->pipe in usbcore This patch (as946) eliminates many of the uses of urb->pipe in usbcore. Unfortunately there will have to be a significant API change, affecting all USB drivers, before we can remove it entirely. This patch contents itself with changing only the interface to usb_buffer_map_sg() and friends: The pipe argument is replaced with a direction flag. That can be done easily because those routines get used in only one place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 04:07:21 +07:00
if (usb_endpoint_num(&urb->ep->desc) == 0) { /* Control URB */
usbcore: make hcd_endpoint_disable wait for queue to drain The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-12 03:01:45 +07:00
; /* Do nothing */
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
} else { /* Status URB */
if (!hcd->uses_new_polling)
usbcore: make hcd_endpoint_disable wait for queue to drain The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-12 03:01:45 +07:00
del_timer (&hcd->rh_timer);
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
if (urb == hcd->status_urb) {
hcd->status_urb = NULL;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
usb_hcd_unlink_urb_from_ep(hcd, urb);
USB: Eliminate urb->status usage! This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 02:42:24 +07:00
usb_hcd_giveback_urb(hcd, urb, status);
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
}
}
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
done:
USB: update spinlock usage for root-hub URBs This patch (as952) adjusts the spinlock usage in the root-hub emulation part of usbcore, to make it match more closely the pattern used by regular host controller drivers. To wit: The private lock (usb_hcd_root_hub_lock) is held throughout the important parts, and it is dropped temporarily without re-enabling interrupts around the call to usb_hcd_giveback_urb(). A nice side effect is that the code now avoids calling local_irq_save(), thereby becoming more RT-friendly. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:05:45 +07:00
spin_unlock_irqrestore(&hcd_root_hub_lock, flags);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
usb: add the concept of default authorization to USB hosts This introduces /sys/bus/devices/usb*/authorized_default; it dictates what is going to be the default authorization state for devices connected to the host. User space can set that using the sysfs file. We hook to the root hub instead of to the device controller as it is quite easy to get to it in sysfs from the device structure (device 5-4.3 is usb5) vs. backtracking to the controller device. By default it is set to be 'authorized' (!0) for normal, wired USB devices and 'unauthorized' (0) for Wireless USB devices. As suggested by Adrian Bunk, make authorized_default static Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 10:33:58 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
/**
* usb_bus_init - shared initialization code
* @bus: the bus structure being initialized
*
* This code is used to initialize a usb_bus structure, memory for which is
* separately managed.
*/
static void usb_bus_init (struct usb_bus *bus)
{
memset (&bus->devmap, 0, sizeof(struct usb_devmap));
bus->devnum_next = 1;
bus->root_hub = NULL;
bus->busnum = -1;
bus->bandwidth_allocated = 0;
bus->bandwidth_int_reqs = 0;
bus->bandwidth_isoc_reqs = 0;
usb: core: hub: hub_port_init lock controller instead of bus The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [<ffffffff81b9bab7>] schedule+0x37/0x90 [<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0 [<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30 [<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150 [<ffffffff817db10c>] usb_control_msg+0xbc/0xf0 [<ffffffff817d07de>] hub_port_init+0x51e/0xb70 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Call Trace: [<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40 [<ffffffff817fd87e>] xhci_address_device+0xe/0x10 [<ffffffff817d047f>] hub_port_init+0x1bf/0xb70 [<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-25 19:48:38 +07:00
mutex_init(&bus->devnum_next_mutex);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
/*-------------------------------------------------------------------------*/
/**
* usb_register_bus - registers the USB host controller with the usb core
* @bus: pointer to the bus to register
* Context: !in_interrupt()
*
* Assigns a bus number, and links the controller into usbcore data
* structures so that it can be seen by scanning the bus list.
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
*
* Return: 0 if successful. A negative error code otherwise.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
static int usb_register_bus(struct usb_bus *bus)
{
usb: cleanup usb_register_bus() and hook up sysfs group This path cleans the exit paths of usb_register_bus() [to use a goto schema], maximum line length (keeping it under ~75). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 10:33:59 +07:00
int result = -E2BIG;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
int busnum;
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_lock(&usb_bus_idr_lock);
usb: core: switch bus numbering to using idr USB bus numbering is based on directly dealing with bitmaps and defines a separate list of busses. This can be simplified and unified by using existing idr functionality. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-26 02:30:30 +07:00
busnum = idr_alloc(&usb_bus_idr, bus, 1, USB_MAXBUS, GFP_KERNEL);
if (busnum < 0) {
pr_err("%s: failed to get bus number\n", usbcore_name);
usb: cleanup usb_register_bus() and hook up sysfs group This path cleans the exit paths of usb_register_bus() [to use a goto schema], maximum line length (keeping it under ~75). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 10:33:59 +07:00
goto error_find_busnum;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
usb: cleanup usb_register_bus() and hook up sysfs group This path cleans the exit paths of usb_register_bus() [to use a goto schema], maximum line length (keeping it under ~75). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 10:33:59 +07:00
bus->busnum = busnum;
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_unlock(&usb_bus_idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[PATCH] USB: add notifier functions to the USB core for devices and busses This should let us get rid of all of the different hooks in the USB core for when something has changed. Also, some other parts of the kernel have wanted to know this kind of information at times. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 11:15:16 +07:00
usb_notify_add_bus(bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: cleanup usb_register_bus() and hook up sysfs group This path cleans the exit paths of usb_register_bus() [to use a goto schema], maximum line length (keeping it under ~75). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 10:33:59 +07:00
dev_info (bus->controller, "new USB bus registered, assigned bus "
"number %d\n", bus->busnum);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return 0;
usb: cleanup usb_register_bus() and hook up sysfs group This path cleans the exit paths of usb_register_bus() [to use a goto schema], maximum line length (keeping it under ~75). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 10:33:59 +07:00
error_find_busnum:
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_unlock(&usb_bus_idr_lock);
usb: cleanup usb_register_bus() and hook up sysfs group This path cleans the exit paths of usb_register_bus() [to use a goto schema], maximum line length (keeping it under ~75). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01 10:33:59 +07:00
return result;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
/**
* usb_deregister_bus - deregisters the USB host controller
* @bus: pointer to the bus to deregister
* Context: !in_interrupt()
*
* Recycles the bus number, and unlinks the controller from usbcore data
* structures so that it won't be seen by scanning the bus list.
*/
static void usb_deregister_bus (struct usb_bus *bus)
{
dev_info (bus->controller, "USB bus %d deregistered\n", bus->busnum);
/*
* NOTE: make sure that all the devices are removed by the
* controller code, as well as having it call this when cleaning
* itself up
*/
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_lock(&usb_bus_idr_lock);
usb: core: switch bus numbering to using idr USB bus numbering is based on directly dealing with bitmaps and defines a separate list of busses. This can be simplified and unified by using existing idr functionality. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-26 02:30:30 +07:00
idr_remove(&usb_bus_idr, bus->busnum);
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_unlock(&usb_bus_idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
[PATCH] USB: add notifier functions to the USB core for devices and busses This should let us get rid of all of the different hooks in the USB core for when something has changed. Also, some other parts of the kernel have wanted to know this kind of information at times. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-21 11:15:16 +07:00
usb_notify_remove_bus(bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
/**
[PATCH] usbcore: register root hub in usb_add_hcd This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 22:25:17 +07:00
* register_root_hub - called by usb_add_hcd() to register a root hub
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
* @hcd: host controller for this root hub
*
[PATCH] usbcore: register root hub in usb_add_hcd This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 22:25:17 +07:00
* This function registers the root hub with the USB subsystem. It sets up
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
* the device properly in the device tree and then calls usb_new_device()
* to register the usb device. It also assigns the root hub's USB address
* (always 1).
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
*
* Return: 0 if successful. A negative error code otherwise.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
static int register_root_hub(struct usb_hcd *hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
struct device *parent_dev = hcd->self.controller;
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
struct usb_device *usb_dev = hcd->self.root_hub;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
const int devnum = 1;
int retval;
usb_dev->devnum = devnum;
usb_dev->bus->devnum_next = devnum + 1;
set_bit (devnum, usb_dev->bus->devmap.devicemap);
usb_set_device_state(usb_dev, USB_STATE_ADDRESS);
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_lock(&usb_bus_idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: replace uses of __constant_{endian} The base versions handle constant folding now. Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-02-12 05:11:36 +07:00
usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE);
if (retval != sizeof usb_dev->descriptor) {
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_unlock(&usb_bus_idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
dev_dbg (parent_dev, "can't read %s device descriptor %d\n",
USB: usb dev_name() instead of dev->bus_id The bus_id field is going away, use the dev_name() function instead. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 11:02:41 +07:00
dev_name(&usb_dev->dev), retval);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return (retval < 0) ? retval : -EMSGSIZE;
}
usb: core: lpm: set lpm_capable for root hub device Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed root hub. The intention of that change was to avoid touching usb core internal field, a.k.a. lpm_capable, and let usb core to set it by checking U1 and U2 exit latency values in the descriptor. Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately, root hub is a special usb device as it has no parent. Hub_port_init() will never be called for a root hub device. That means lpm_capable will by no means be set for the root hub. As the result, lpm isn't functional at all in Linux kernel. This patch add the code to check and set lpm_capable when registering a root hub device. It could be back-ported to kernels as old as v3.15, that contains the Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM."). Cc: stable@vger.kernel.org # 3.15 Reported-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-16 08:08:26 +07:00
if (le16_to_cpu(usb_dev->descriptor.bcdUSB) >= 0x0201) {
USB: Make sure to fetch the BOS desc for roothubs. The BOS descriptor is normally fetched and stored in the usb_device->bos during enumeration. USB 3.0 roothubs don't undergo enumeration, but we need them to have a BOS descriptor, since each xHCI host has a different U1 and U2 exit latency. Make sure to fetch the BOS descriptor for USB 3.0 roothubs. It will be freed when the roothub usb_device is released. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Andiry Xu <andiry.xu@amd.com>
2012-05-16 06:58:45 +07:00
retval = usb_get_bos_descriptor(usb_dev);
usb: core: lpm: set lpm_capable for root hub device Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM.") removed the code to set lpm_capable for USB 3.0 super-speed root hub. The intention of that change was to avoid touching usb core internal field, a.k.a. lpm_capable, and let usb core to set it by checking U1 and U2 exit latency values in the descriptor. Usb core checks and sets lpm_capable in hub_port_init(). Unfortunately, root hub is a special usb device as it has no parent. Hub_port_init() will never be called for a root hub device. That means lpm_capable will by no means be set for the root hub. As the result, lpm isn't functional at all in Linux kernel. This patch add the code to check and set lpm_capable when registering a root hub device. It could be back-ported to kernels as old as v3.15, that contains the Commit 25cd2882e2fc ("usb/xhci: Change how we indicate a host supports Link PM."). Cc: stable@vger.kernel.org # 3.15 Reported-by: Kevin Strasser <kevin.strasser@linux.intel.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-16 08:08:26 +07:00
if (!retval) {
usb_dev->lpm_capable = usb_device_supports_lpm(usb_dev);
usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-10 14:59:25 +07:00
} else if (usb_dev->speed >= USB_SPEED_SUPER) {
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_unlock(&usb_bus_idr_lock);
USB: Make sure to fetch the BOS desc for roothubs. The BOS descriptor is normally fetched and stored in the usb_device->bos during enumeration. USB 3.0 roothubs don't undergo enumeration, but we need them to have a BOS descriptor, since each xHCI host has a different U1 and U2 exit latency. Make sure to fetch the BOS descriptor for USB 3.0 roothubs. It will be freed when the roothub usb_device is released. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Andiry Xu <andiry.xu@amd.com>
2012-05-16 06:58:45 +07:00
dev_dbg(parent_dev, "can't read %s bos descriptor %d\n",
dev_name(&usb_dev->dev), retval);
return retval;
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
retval = usb_new_device (usb_dev);
if (retval) {
dev_err (parent_dev, "can't register root hub for %s, %d\n",
USB: usb dev_name() instead of dev->bus_id The bus_id field is going away, use the dev_name() function instead. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-05-02 11:02:41 +07:00
dev_name(&usb_dev->dev), retval);
USB: Fix race condition when removing host controllers This patch (as1607) fixes a race that can occur if a USB host controller is removed while a process is reading the /sys/kernel/debug/usb/devices file. The usb_device_read() routine uses the bus->root_hub pointer to determine whether or not the root hub is registered. The is not a valid test, because the pointer is set before the root hub gets registered and remains set even after the root hub is unregistered and deallocated. As a result, usb_device_read() or usb_device_dump() can access freed memory, causing an oops. The patch changes the test to use the hcd->rh_registered flag, which does get set and cleared at the appropriate times. It also makes sure to hold the usb_bus_list_lock mutex while setting the flag, so that usb_device_read() will become aware of new root hubs as soon as they are registered. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Don Zickus <dzickus@redhat.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-09-27 00:09:53 +07:00
} else {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
spin_lock_irq (&hcd_root_hub_lock);
hcd->rh_registered = 1;
spin_unlock_irq (&hcd_root_hub_lock);
/* Did the HC die before the root hub was registered? */
USB: remove remaining usages of hcd->state from usbcore and fix regression This patch (as1467) removes the last usages of hcd->state from usbcore. We no longer check to see if an interrupt handler finds that a controller has died; instead we rely on host controller drivers to make an explicit call to usb_hc_died(). This fixes a regression introduced by commit 9b37596a2e860404503a3f2a6513db60c296bfdc (USB: move usbcore away from hcd->state). It used to be that when a controller shared an IRQ with another device and an interrupt arrived while hcd->state was set to HC_STATE_HALT, the interrupt handler would be skipped. The commit removed that test; as a result the current code doesn't skip calling the handler and ends up believing the controller has died, even though it's only temporarily stopped. The solution is to ignore HC_STATE_HALT following the handler's return. As a consequence of this change, several of the host controller drivers need to be modified. They can no longer implicitly rely on usbcore realizing that a controller has died because of hcd->state. The patch adds calls to usb_hc_died() in the appropriate places. The patch also changes a few of the interrupt handlers. They don't expect to be called when hcd->state is equal to HC_STATE_HALT, even if the controller is still alive. Early returns were added to avoid any confusion. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Manuel Lauss <manuel.lauss@googlemail.com> CC: Rodolfo Giometti <giometti@linux.it> CC: Olav Kongas <ok@artecdesign.ee> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-18 04:27:12 +07:00
if (HCD_DEAD(hcd))
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb_hc_died (hcd); /* This time clean up */
}
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_unlock(&usb_bus_idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return retval;
}
USB: add usb_hcd_{start,end}_port_resume This patch (as1649) adds a mechanism for host controller drivers to inform usbcore when they have begun or ended resume signalling on a particular root-hub port. The core will then make sure that the root hub does not get runtime-suspended while the port resume is going on. Since commit 596d789a211d134dc5f94d1e5957248c204ef850 (USB: set hub's default autosuspend delay as 0), the system tries to suspend hubs whenever they aren't in use. While a root-hub port is being resumed, the root hub does not appear to be in use. Attempted runtime suspends fail because of the ongoing port resume, but the PM core just keeps on trying over and over again. We want to prevent this wasteful effort. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-01-26 05:09:42 +07:00
/*
* usb_hcd_start_port_resume - a root-hub port is sending a resume signal
* @bus: the bus which the root hub belongs to
* @portnum: the port which is being resumed
*
* HCDs should call this function when they know that a resume signal is
* being sent to a root-hub port. The root hub will be prevented from
* going into autosuspend until usb_hcd_end_port_resume() is called.
*
* The bus's private lock must be held by the caller.
*/
void usb_hcd_start_port_resume(struct usb_bus *bus, int portnum)
{
unsigned bit = 1 << portnum;
if (!(bus->resuming_ports & bit)) {
bus->resuming_ports |= bit;
pm_runtime_get_noresume(&bus->root_hub->dev);
}
}
EXPORT_SYMBOL_GPL(usb_hcd_start_port_resume);
/*
* usb_hcd_end_port_resume - a root-hub port has stopped sending a resume signal
* @bus: the bus which the root hub belongs to
* @portnum: the port which is being resumed
*
* HCDs should call this function when they know that a resume signal has
* stopped being sent to a root-hub port. The root hub will be allowed to
* autosuspend again.
*
* The bus's private lock must be held by the caller.
*/
void usb_hcd_end_port_resume(struct usb_bus *bus, int portnum)
{
unsigned bit = 1 << portnum;
if (bus->resuming_ports & bit) {
bus->resuming_ports &= ~bit;
pm_runtime_put_noidle(&bus->root_hub->dev);
}
}
EXPORT_SYMBOL_GPL(usb_hcd_end_port_resume);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
/**
* usb_calc_bus_time - approximate periodic transaction time in nanoseconds
* @speed: from dev->speed; USB_SPEED_{LOW,FULL,HIGH}
* @is_input: true iff the transaction sends data to the host
* @isoc: true for isochronous transactions, false for interrupt ones
* @bytecount: how many bytes in the transaction.
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Return: Approximate bus time in nanoseconds for a periodic transaction.
*
* Note:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
* See USB 2.0 spec section 5.11.3; only periodic transfers need to be
* scheduled in software, this function is only used for such scheduling.
*/
long usb_calc_bus_time (int speed, int is_input, int isoc, int bytecount)
{
unsigned long tmp;
switch (speed) {
case USB_SPEED_LOW: /* INTR only */
if (is_input) {
tmp = (67667L * (31L + 10L * BitTime (bytecount))) / 1000L;
drivers: usb: core: hcd: removed braces for return statements Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:09 +07:00
return 64060L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
} else {
tmp = (66700L * (31L + 10L * BitTime (bytecount))) / 1000L;
drivers: usb: core: hcd: removed braces for return statements Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:09 +07:00
return 64107L + (2 * BW_HUB_LS_SETUP) + BW_HOST_DELAY + tmp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
case USB_SPEED_FULL: /* ISOC or INTR */
if (isoc) {
tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
drivers: usb: core: hcd: removed braces for return statements Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:09 +07:00
return ((is_input) ? 7268L : 6265L) + BW_HOST_DELAY + tmp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
} else {
tmp = (8354L * (31L + 10L * BitTime (bytecount))) / 1000L;
drivers: usb: core: hcd: removed braces for return statements Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:09 +07:00
return 9107L + BW_HOST_DELAY + tmp;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
case USB_SPEED_HIGH: /* ISOC or INTR */
drivers: usb: core: hcd: replaced C99 // comments Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:08 +07:00
/* FIXME adjust for input vs output */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (isoc)
[PATCH] USB: fix in usb_calc_bus_time This patch does the same swap, i.e. use the ISO macro if (isoc). Additionally, it fixes the return value - the usb_calc_bus_time function returns the time in nanoseconds (I didn't notice that before) while the HS_USECS and HS_USECS_ISO are microseconds. This fixes the function to return nanoseconds always, and adjusts ehci-q.c (the only high-speed caller of the function) to wrap the call in NS_TO_US(). Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 02:18:28 +07:00
tmp = HS_NSECS_ISO (bytecount);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
else
[PATCH] USB: fix in usb_calc_bus_time This patch does the same swap, i.e. use the ISO macro if (isoc). Additionally, it fixes the return value - the usb_calc_bus_time function returns the time in nanoseconds (I didn't notice that before) while the HS_USECS and HS_USECS_ISO are microseconds. This fixes the function to return nanoseconds always, and adjusts ehci-q.c (the only high-speed caller of the function) to wrap the call in NS_TO_US(). Signed-off-by: Dan Streetman <ddstreet@ieee.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30 02:18:28 +07:00
tmp = HS_NSECS (bytecount);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return tmp;
default:
pr_debug ("%s: bogus device speed!\n", usbcore_name);
return -1;
}
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_calc_bus_time);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
/*
* Generic HC operations.
*/
/*-------------------------------------------------------------------------*/
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
/**
* usb_hcd_link_urb_to_ep - add an URB to its endpoint queue
* @hcd: host controller to which @urb was submitted
* @urb: URB being submitted
*
* Host controller drivers should call this routine in their enqueue()
* method. The HCD's private spinlock must be held and interrupts must
* be disabled. The actions carried out here are required for URB
* submission, as well as for endpoint shutdown and for usb_kill_urb.
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Return: 0 for no error, otherwise a negative error code (in which case
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
* the enqueue() method must fail). If no error occurs but enqueue() fails
* anyway, it must call usb_hcd_unlink_urb_from_ep() before releasing
* the private spinlock and returning.
*/
int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
int rc = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
spin_lock(&hcd_urb_list_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
/* Check that the URB isn't being killed */
USB: mark "reject" field of struct urb as atomic_t It is enough to protect accesses to reject field of urb by marking it as atomic_t,also it is the only reason of existence of usb_reject_lock,so remove the lock to make code more clean. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-12 20:38:45 +07:00
if (unlikely(atomic_read(&urb->reject))) {
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
rc = -EPERM;
goto done;
usb: free DMA mappings if enqueue fails This patch releases DMA resources if enqueue fails in the HCD. Linux had this bug ever since we converted from virt_to_bus for 2.4. It is difficult to hit. A user would need a significant memory pressure or some other unusual condition. It was reported to me by IBM. They ran a management application for RSA II adapters which sent Bulk requests to an Interrupt endpoint. Submissions got rejected by HCD due to an invalid interval value and the swiotlb pool became depleted in the matter of hours. We fixed the invalid interval issue in devio.c separately, but this seems to be a bug worth fixing as well. Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-09 03:37:49 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
if (unlikely(!urb->ep->enabled)) {
rc = -ENOENT;
goto done;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: flush outstanding URBs when suspending This patch (as989) makes usbcore flush all outstanding URBs for each device as the device is suspended. This will be true even when CONFIG_USB_SUSPEND is not enabled. In addition, an extra can_submit flag is added to the usb_device structure. That flag will be turned off whenever a suspend request has been received for the device, even if the device isn't actually suspended because CONFIG_USB_SUSPEND isn't set. It's no longer necessary to check for the device state being equal to USB_STATE_SUSPENDED during URB submission; that check can be replaced by a check of the can_submit flag. This also permits us to remove some questionable references to the deprecated power.power_state field. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 22:34:26 +07:00
if (unlikely(!urb->dev->can_submit)) {
rc = -EHOSTUNREACH;
goto done;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
* Check the host controller's state and add the URB to the
* endpoint's queue.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
if (HCD_RH_RUNNING(hcd)) {
USB: add urb->unlinked field This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:40:36 +07:00
urb->unlinked = 0;
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
list_add_tail(&urb->urb_list, &urb->ep->urb_list);
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
} else {
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
rc = -ESHUTDOWN;
goto done;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
done:
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
spin_unlock(&hcd_urb_list_lock);
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
return rc;
}
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_link_urb_to_ep);
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
/**
* usb_hcd_check_unlink_urb - check whether an URB may be unlinked
* @hcd: host controller to which @urb was submitted
* @urb: URB being checked for unlinkability
* @status: error code to store in @urb if the unlink succeeds
*
* Host controller drivers should call this routine in their dequeue()
* method. The HCD's private spinlock must be held and interrupts must
* be disabled. The actions carried out here are required for making
* sure than an unlink is valid.
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Return: 0 for no error, otherwise a negative error code (in which case
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
* the dequeue() method must fail). The possible error codes are:
*
* -EIDRM: @urb was not submitted or has already completed.
* The completion function may not have been called yet.
*
* -EBUSY: @urb has already been unlinked.
*/
int usb_hcd_check_unlink_urb(struct usb_hcd *hcd, struct urb *urb,
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
int status)
{
struct list_head *tmp;
/* insist the urb is still queued */
list_for_each(tmp, &urb->ep->urb_list) {
if (tmp == &urb->urb_list)
break;
}
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
if (tmp != &urb->urb_list)
return -EIDRM;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
/* Any status except -EINPROGRESS means something already started to
* unlink this URB from the hardware. So there's no more work to do.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
USB: add urb->unlinked field This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:40:36 +07:00
if (urb->unlinked)
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
return -EBUSY;
USB: add urb->unlinked field This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:40:36 +07:00
urb->unlinked = status;
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
return 0;
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
}
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_check_unlink_urb);
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
/**
* usb_hcd_unlink_urb_from_ep - remove an URB from its endpoint queue
* @hcd: host controller to which @urb was submitted
* @urb: URB being unlinked
*
* Host controller drivers should call this routine before calling
* usb_hcd_giveback_urb(). The HCD's private spinlock must be held and
* interrupts must be disabled. The actions carried out here are required
* for URB completion.
*/
void usb_hcd_unlink_urb_from_ep(struct usb_hcd *hcd, struct urb *urb)
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
{
/* clear all state linking urb to this dev (and hcd) */
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
spin_lock(&hcd_urb_list_lock);
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
list_del_init(&urb->urb_list);
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
spin_unlock(&hcd_urb_list_lock);
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
}
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_unlink_urb_from_ep);
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
/*
* Some usb host controllers can only perform dma using a small SRAM area.
* The usb core itself is however optimized for host controllers that can dma
* using regular system memory - like pci devices doing bus mastering.
*
usb: Fixed a few typos Fixed typos in comments of various drivers/usb files Signed-off-by: Mickael Maison <mickael.maison@gmail.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-18 16:25:04 +07:00
* To support host controllers with limited dma capabilities we provide dma
USB: drop HCD_LOCAL_MEM flag With the addition of the local memory allocator, the HCD_LOCAL_MEM flag can be dropped and the checks against it replaced with a check for the localmem_pool ptr being initialized. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:43 +07:00
* bounce buffers. This feature can be enabled by initializing
* hcd->localmem_pool using usb_hcd_setup_local_mem().
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
*
USB: drop HCD_LOCAL_MEM flag With the addition of the local memory allocator, the HCD_LOCAL_MEM flag can be dropped and the checks against it replaced with a check for the localmem_pool ptr being initialized. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:43 +07:00
* The initialized hcd->localmem_pool then tells the usb code to allocate all
* data for dma using the genalloc API.
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
*
* So, to summarize...
*
* - We need "local" memory, canonical example being
* a small SRAM on a discrete controller being the
* only memory that the controller can read ...
* (a) "normal" kernel memory is no good, and
* (b) there's not enough to share
*
* - So we use that, even though the primary requirement
USB: core: correct spelling mistakes in comments and warning Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-01-04 12:54:41 +07:00
* is that the memory be "local" (hence addressable
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
* by that device), not "coherent".
*
*/
static int hcd_alloc_coherent(struct usb_bus *bus,
gfp_t mem_flags, dma_addr_t *dma_handle,
void **vaddr_handle, size_t size,
enum dma_data_direction dir)
{
unsigned char *vaddr;
USB: EHCI: fix NULL pointer dererence in HCDs that use HCD_LOCAL_MEM If we use the HCD_LOCAL_MEM flag and dma_declare_coherent_memory() to enforce the host controller's local memory utilization we also need to disable native scatter-gather support, otherwise hcd_alloc_coherent() in map_urb_for_dma() is called with urb->transfer_buffer == NULL, that triggers a NULL pointer dereference. We can also consider to add a WARN_ON() and return an error code to better catch this problem in the future. At the moment no driver seems to hit this bug, so I should consider this a low-priority fix. Signed-off-by: Andrea Righi <arighi@develer.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-28 21:56:45 +07:00
if (*vaddr_handle == NULL) {
WARN_ON_ONCE(1);
return -EFAULT;
}
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
vaddr = hcd_buffer_alloc(bus, size + sizeof(vaddr),
mem_flags, dma_handle);
if (!vaddr)
return -ENOMEM;
/*
* Store the virtual address of the buffer at the end
* of the allocated dma buffer. The size of the buffer
* may be uneven so use unaligned functions instead
* of just rounding up. It makes sense to optimize for
* memory footprint over access speed since the amount
* of memory available for dma may be limited.
*/
put_unaligned((unsigned long)*vaddr_handle,
(unsigned long *)(vaddr + size));
if (dir == DMA_TO_DEVICE)
memcpy(vaddr, *vaddr_handle, size);
*vaddr_handle = vaddr;
return 0;
}
static void hcd_free_coherent(struct usb_bus *bus, dma_addr_t *dma_handle,
void **vaddr_handle, size_t size,
enum dma_data_direction dir)
{
unsigned char *vaddr = *vaddr_handle;
vaddr = (void *)get_unaligned((unsigned long *)(vaddr + size));
if (dir == DMA_FROM_DEVICE)
memcpy(vaddr, *vaddr_handle, size);
hcd_buffer_free(bus, size + sizeof(vaddr), *vaddr_handle, *dma_handle);
*vaddr_handle = vaddr;
*dma_handle = 0;
}
USB: HCD: Add usb_hcd prefix to exported functions The convention is to prefix symbols exported from the USB HCD core with "usb_hcd". This change makes unmap_urb_setup_for_dma() and unmap_urb_for_dma() consistent with that. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:47 +07:00
void usb_hcd_unmap_urb_setup_for_dma(struct usb_hcd *hcd, struct urb *urb)
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
{
usb: core: Allow compilation on platforms where NO_DMA=y Some platforms don't have DMA, but we should still be able to build USB drivers for these platforms. They could still be used through vhci_hcd, usbip_host, or maybe something like USB passthrough in UML from a capable host. If NO_DMA=y: ERROR: "dma_pool_destroy" [drivers/usb/core/usbcore.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/core/usbcore.ko] undefined! Add a few checks for CONFIG_HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-16 22:10:57 +07:00
if (IS_ENABLED(CONFIG_HAS_DMA) &&
(urb->transfer_flags & URB_SETUP_MAP_SINGLE))
usb: hcd: use correct device pointer for dma ops commit a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller but forgot to do it for one instance. This gets caught when DMA debugging is enabled since dma map and unmap end up using different device pointers. Fix it. Fixes: a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") Reported-by: Carlos Hernandez <ceh@ti.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-03 15:26:52 +07:00
dma_unmap_single(hcd->self.sysdev,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->setup_dma,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
else if (urb->transfer_flags & URB_SETUP_MAP_LOCAL)
hcd_free_coherent(urb->dev->bus,
&urb->setup_dma,
(void **) &urb->setup_packet,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
USB: introduce unmap_urb_setup_for_dma() Split unmap_urb_for_dma() to allow just the setup buffer to be unmapped. This allows HCDs to use PIO for the setup buffer if it is not suitable for DMA. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-01 05:21:55 +07:00
/* Make it safe to call this routine more than once */
urb->transfer_flags &= ~(URB_SETUP_MAP_SINGLE | URB_SETUP_MAP_LOCAL);
}
USB: HCD: Add usb_hcd prefix to exported functions The convention is to prefix symbols exported from the USB HCD core with "usb_hcd". This change makes unmap_urb_setup_for_dma() and unmap_urb_for_dma() consistent with that. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:47 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_setup_for_dma);
USB: introduce unmap_urb_setup_for_dma() Split unmap_urb_for_dma() to allow just the setup buffer to be unmapped. This allows HCDs to use PIO for the setup buffer if it is not suitable for DMA. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-01 05:21:55 +07:00
USB: HCD: Add driver hooks for (un)?map_urb_for_dma Provide optional hooks for the host controller driver to override the default DMA mapping and unmapping routines. In general, these shouldn't be necessary unless the host controller has special DMA requirements, such as alignment contraints. If these are not specified, the general usb_hcd_(un)?map_urb_for_dma functions will be used instead. Also, pass the status to unmap_urb_for_dma so it can know whether the DMA buffer has been overwritten. Finally, add a flag to be used by these implementations if they allocated a temporary buffer so it can be freed properly when unmapping. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:48 +07:00
static void unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
{
if (hcd->driver->unmap_urb_for_dma)
hcd->driver->unmap_urb_for_dma(hcd, urb);
else
usb_hcd_unmap_urb_for_dma(hcd, urb);
}
USB: HCD: Add usb_hcd prefix to exported functions The convention is to prefix symbols exported from the USB HCD core with "usb_hcd". This change makes unmap_urb_setup_for_dma() and unmap_urb_for_dma() consistent with that. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:47 +07:00
void usb_hcd_unmap_urb_for_dma(struct usb_hcd *hcd, struct urb *urb)
USB: introduce unmap_urb_setup_for_dma() Split unmap_urb_for_dma() to allow just the setup buffer to be unmapped. This allows HCDs to use PIO for the setup buffer if it is not suitable for DMA. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-01 05:21:55 +07:00
{
enum dma_data_direction dir;
USB: HCD: Add usb_hcd prefix to exported functions The convention is to prefix symbols exported from the USB HCD core with "usb_hcd". This change makes unmap_urb_setup_for_dma() and unmap_urb_for_dma() consistent with that. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:47 +07:00
usb_hcd_unmap_urb_setup_for_dma(hcd, urb);
USB: introduce unmap_urb_setup_for_dma() Split unmap_urb_for_dma() to allow just the setup buffer to be unmapped. This allows HCDs to use PIO for the setup buffer if it is not suitable for DMA. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-01 05:21:55 +07:00
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
usb: core: Allow compilation on platforms where NO_DMA=y Some platforms don't have DMA, but we should still be able to build USB drivers for these platforms. They could still be used through vhci_hcd, usbip_host, or maybe something like USB passthrough in UML from a capable host. If NO_DMA=y: ERROR: "dma_pool_destroy" [drivers/usb/core/usbcore.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/core/usbcore.ko] undefined! Add a few checks for CONFIG_HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-16 22:10:57 +07:00
if (IS_ENABLED(CONFIG_HAS_DMA) &&
(urb->transfer_flags & URB_DMA_MAP_SG))
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
dma_unmap_sg(hcd->self.sysdev,
USB: Change the scatterlist type in struct urb Change the type of the URB's 'sg' pointer from a usb_sg_request to a scatterlist. This allows drivers to submit scatter-gather lists without using the usb_sg_wait() interface. It has the added benefit of removing the typecasts that were added as part of patch as1368 (and slightly decreasing the number of pointer dereferences). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-02 01:20:01 +07:00
urb->sg,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->num_sgs,
dir);
usb: core: Allow compilation on platforms where NO_DMA=y Some platforms don't have DMA, but we should still be able to build USB drivers for these platforms. They could still be used through vhci_hcd, usbip_host, or maybe something like USB passthrough in UML from a capable host. If NO_DMA=y: ERROR: "dma_pool_destroy" [drivers/usb/core/usbcore.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/core/usbcore.ko] undefined! Add a few checks for CONFIG_HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-16 22:10:57 +07:00
else if (IS_ENABLED(CONFIG_HAS_DMA) &&
(urb->transfer_flags & URB_DMA_MAP_PAGE))
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
dma_unmap_page(hcd->self.sysdev,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->transfer_dma,
urb->transfer_buffer_length,
dir);
usb: core: Allow compilation on platforms where NO_DMA=y Some platforms don't have DMA, but we should still be able to build USB drivers for these platforms. They could still be used through vhci_hcd, usbip_host, or maybe something like USB passthrough in UML from a capable host. If NO_DMA=y: ERROR: "dma_pool_destroy" [drivers/usb/core/usbcore.ko] undefined! ERROR: "bad_dma_ops" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_free" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_alloc" [drivers/usb/core/usbcore.ko] undefined! ERROR: "dma_pool_create" [drivers/usb/core/usbcore.ko] undefined! Add a few checks for CONFIG_HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-16 22:10:57 +07:00
else if (IS_ENABLED(CONFIG_HAS_DMA) &&
(urb->transfer_flags & URB_DMA_MAP_SINGLE))
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
dma_unmap_single(hcd->self.sysdev,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->transfer_dma,
urb->transfer_buffer_length,
dir);
else if (urb->transfer_flags & URB_MAP_LOCAL)
hcd_free_coherent(urb->dev->bus,
&urb->transfer_dma,
&urb->transfer_buffer,
urb->transfer_buffer_length,
dir);
/* Make it safe to call this routine more than once */
USB: introduce unmap_urb_setup_for_dma() Split unmap_urb_for_dma() to allow just the setup buffer to be unmapped. This allows HCDs to use PIO for the setup buffer if it is not suitable for DMA. Signed-off-by: Martin Fuzzey <mfuzzey@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-10-01 05:21:55 +07:00
urb->transfer_flags &= ~(URB_DMA_MAP_SG | URB_DMA_MAP_PAGE |
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
URB_DMA_MAP_SINGLE | URB_MAP_LOCAL);
}
USB: HCD: Add usb_hcd prefix to exported functions The convention is to prefix symbols exported from the USB HCD core with "usb_hcd". This change makes unmap_urb_setup_for_dma() and unmap_urb_for_dma() consistent with that. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:47 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_unmap_urb_for_dma);
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
static int map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags)
USB: HCD: Add driver hooks for (un)?map_urb_for_dma Provide optional hooks for the host controller driver to override the default DMA mapping and unmapping routines. In general, these shouldn't be necessary unless the host controller has special DMA requirements, such as alignment contraints. If these are not specified, the general usb_hcd_(un)?map_urb_for_dma functions will be used instead. Also, pass the status to unmap_urb_for_dma so it can know whether the DMA buffer has been overwritten. Finally, add a flag to be used by these implementations if they allocated a temporary buffer so it can be freed properly when unmapping. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:48 +07:00
{
if (hcd->driver->map_urb_for_dma)
return hcd->driver->map_urb_for_dma(hcd, urb, mem_flags);
else
return usb_hcd_map_urb_for_dma(hcd, urb, mem_flags);
}
int usb_hcd_map_urb_for_dma(struct usb_hcd *hcd, struct urb *urb,
gfp_t mem_flags)
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
{
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
enum dma_data_direction dir;
int ret = 0;
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
/* Map the URB's buffers for DMA access.
* Lower level HCD code should use *_dma exclusively,
USB: Push scatter gather lists down to host controller drivers. This is the original patch I created before David Vrabel posted a better patch (http://marc.info/?l=linux-usb&m=123377477209109&w=2) that does basically the same thing. This patch will get replaced with his (modified) patch later. Allow USB device drivers that use usb_sg_init() and usb_sg_wait() to push bulk endpoint scatter gather lists down to the host controller drivers. This allows host controller drivers to more efficiently enqueue these transfers, and allows the xHCI host controller to better take advantage of USB 3.0 "bursts" for bulk endpoints. This patch currently only enables scatter gather lists for bulk endpoints. Other endpoint types that use the usb_sg_* functions will not have their scatter gather lists pushed down to the host controller. For periodic endpoints, we want each scatterlist entry to be a separate transfer. Eventually, HCDs could parse these scatter-gather lists for periodic endpoints also. For now, we use the old code and call usb_submit_urb() for each scatterlist entry. The caller of usb_sg_init() can request that all bytes in the scatter gather list be transferred by passing in a length of zero. Handle that request for a bulk endpoint under xHCI by walking the scatter gather list and calculating the length. We could let the HCD handle a zero length in this case, but I'm not sure if the core layers in between will get confused by this. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:59:01 +07:00
* unless it uses pio or talks to another transport,
* or uses the provided scatter gather list for bulk.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
USB: remove URB_NO_SETUP_DMA_MAP Now that URB_NO_SETUP_DMA_MAP is no longer in use, this patch (as1376) removes all references to it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-01 03:35:37 +07:00
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
usb: musb: do not use dma for control transfers The Inventra DMA engine used with the MUSB controller in many SoCs cannot use DMA for control transfers on EP0, but can use DMA for all other transfers. The USB core maps urbs for DMA if hcd->self.uses_dma is true. (hcd->self.uses_dma is true for MUSB as well). Split the uses_dma flag into two - one that says if the controller needs to use PIO for control transfers, and another which says if the controller uses DMA (for all other transfers). Also, populate this flag for all MUSB by default. (Tested on OMAP3 and OMAP4 boards, with EHCI and MUSB HCDs simultaneously in use). Signed-off-by: Maulik Mankad <x0082077@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Cc: Oliver Neukum <oliver@neukum.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Cc: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2010-11-18 20:24:17 +07:00
if (hcd->self.uses_pio_for_control)
return ret;
usb: add a hcd_uses_dma helper The USB buffer allocation code is the only place in the usb core (and in fact the whole kernel) that uses is_device_dma_capable, while the URB mapping code uses the uses_dma flag in struct usb_bus. Switch the buffer allocation to use the uses_dma flag used by the rest of the USB code, and create a helper in hcd.h that checks this flag as well as the CONFIG_HAS_DMA to simplify the caller a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190811080520.21712-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-11 15:05:16 +07:00
if (hcd_uses_dma(hcd)) {
usb: core: Check URB setup_packet and transfer_buffer sanity Update usb_hcd_map_urb_for_dma() to check for an URB's setup_packet and transfer_buffer sanity. We first check that urb->setup_packet is neither coming from vmalloc space nor is an on stack buffer, and if that's the case, produce a warning and return an error. For urb->transfer_buffer there is an existing is_vmalloc_addr() check so we just supplement that with an object_is_on_stack() check, produce a warning if that is the case and also return an error. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26 07:56:11 +07:00
if (is_vmalloc_addr(urb->setup_packet)) {
WARN_ONCE(1, "setup packet is not dma capable\n");
return -EAGAIN;
} else if (object_is_on_stack(urb->setup_packet)) {
WARN_ONCE(1, "setup packet is on stack\n");
return -EAGAIN;
}
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
urb->setup_dma = dma_map_single(
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
hcd->self.sysdev,
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
urb->setup_packet,
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
sizeof(struct usb_ctrlrequest),
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
DMA_TO_DEVICE);
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
if (dma_mapping_error(hcd->self.sysdev,
USB: Check results of dma_map_single In map_urb_for_dma(), the DMA address returned by dma_map_single() is not checked to determine if it is legal. This lack of checking contributed to a problem with the libertas wireless driver (http://marc.info/?l=linux-wireless&m=125695331205062&w=2). The difficulty was not detected until the buffer was unmapped. By this time memory corruption had occurred. The situation is fixed by testing the returned DMA address, and returning -EAGAIN if the address is invalid. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-05 23:37:03 +07:00
urb->setup_dma))
return -EAGAIN;
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->transfer_flags |= URB_SETUP_MAP_SINGLE;
USB: drop HCD_LOCAL_MEM flag With the addition of the local memory allocator, the HCD_LOCAL_MEM flag can be dropped and the checks against it replaced with a check for the localmem_pool ptr being initialized. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:43 +07:00
} else if (hcd->localmem_pool) {
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
ret = hcd_alloc_coherent(
urb->dev->bus, mem_flags,
&urb->setup_dma,
(void **)&urb->setup_packet,
sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
if (ret)
return ret;
urb->transfer_flags |= URB_SETUP_MAP_LOCAL;
USB: add missing "{}" in map_urb_for_dma Obviously, {} is needed in the branch of "else if (hcd->driver->flags & HCD_LOCAL_MEM)" for handling of setup packet mapping. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-12 22:38:12 +07:00
}
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
}
dir = usb_urb_dir_in(urb) ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
if (urb->transfer_buffer_length != 0
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
&& !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP)) {
usb: add a hcd_uses_dma helper The USB buffer allocation code is the only place in the usb core (and in fact the whole kernel) that uses is_device_dma_capable, while the URB mapping code uses the uses_dma flag in struct usb_bus. Switch the buffer allocation to use the uses_dma flag used by the rest of the USB code, and create a helper in hcd.h that checks this flag as well as the CONFIG_HAS_DMA to simplify the caller a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20190811080520.21712-3-hch@lst.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-08-11 15:05:16 +07:00
if (hcd_uses_dma(hcd)) {
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
if (urb->num_sgs) {
usb/hcd: Ensure scatter-gather is not used for isoc transfers We don't support sg for isoc transfers, enforce this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-07-09 20:57:00 +07:00
int n;
/* We don't support sg for isoc transfers ! */
if (usb_endpoint_xfer_isoc(&urb->ep->desc)) {
WARN_ON(1);
return -EINVAL;
}
n = dma_map_sg(
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
hcd->self.sysdev,
USB: Change the scatterlist type in struct urb Change the type of the URB's 'sg' pointer from a usb_sg_request to a scatterlist. This allows drivers to submit scatter-gather lists without using the usb_sg_wait() interface. It has the added benefit of removing the typecasts that were added as part of patch as1368 (and slightly decreasing the number of pointer dereferences). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-02 01:20:01 +07:00
urb->sg,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->num_sgs,
dir);
if (n <= 0)
ret = -EAGAIN;
else
urb->transfer_flags |= URB_DMA_MAP_SG;
usb: fix number of mapped SG DMA entries Add a new field num_mapped_sgs to struct urb so that we have a place to store the number of mapped entries and can also retain the original value of entries in num_sgs. Previously, usb_hcd_map_urb_for_dma() would overwrite this with the number of mapped entries, which would break dma_unmap_sg() because it requires the original number of entries. This fixes warnings like the following when using USB storage devices: ------------[ cut here ]------------ WARNING: at lib/dma-debug.c:902 check_unmap+0x4e4/0x695() ehci_hcd 0000:00:12.2: DMA-API: device driver frees DMA sg list with different entry count [map count=4] [unmap count=1] Modules linked in: ohci_hcd ehci_hcd Pid: 0, comm: kworker/0:1 Not tainted 3.2.0-rc2+ #319 Call Trace: <IRQ> [<ffffffff81036d3b>] warn_slowpath_common+0x80/0x98 [<ffffffff81036de7>] warn_slowpath_fmt+0x41/0x43 [<ffffffff811fa5ae>] check_unmap+0x4e4/0x695 [<ffffffff8105e92c>] ? trace_hardirqs_off+0xd/0xf [<ffffffff8147208b>] ? _raw_spin_unlock_irqrestore+0x33/0x50 [<ffffffff811fa84a>] debug_dma_unmap_sg+0xeb/0x117 [<ffffffff8137b02f>] usb_hcd_unmap_urb_for_dma+0x71/0x188 [<ffffffff8137b166>] unmap_urb_for_dma+0x20/0x22 [<ffffffff8137b1c5>] usb_hcd_giveback_urb+0x5d/0xc0 [<ffffffffa0000d02>] ehci_urb_done+0xf7/0x10c [ehci_hcd] [<ffffffffa0001140>] qh_completions+0x429/0x4bd [ehci_hcd] [<ffffffffa000340a>] ehci_work+0x95/0x9c0 [ehci_hcd] ... ---[ end trace f29ac88a5a48c580 ]--- Mapped at: [<ffffffff811faac4>] debug_dma_map_sg+0x45/0x139 [<ffffffff8137bc0b>] usb_hcd_map_urb_for_dma+0x22e/0x478 [<ffffffff8137c494>] usb_hcd_submit_urb+0x63f/0x6fa [<ffffffff8137d01c>] usb_submit_urb+0x2c7/0x2de [<ffffffff8137dcd4>] usb_sg_wait+0x55/0x161 Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-12-04 05:41:31 +07:00
urb->num_mapped_sgs = n;
if (n != urb->num_sgs)
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->transfer_flags |=
URB_DMA_SG_COMBINED;
} else if (urb->sg) {
USB: Change the scatterlist type in struct urb Change the type of the URB's 'sg' pointer from a usb_sg_request to a scatterlist. This allows drivers to submit scatter-gather lists without using the usb_sg_wait() interface. It has the added benefit of removing the typecasts that were added as part of patch as1368 (and slightly decreasing the number of pointer dereferences). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-02 01:20:01 +07:00
struct scatterlist *sg = urb->sg;
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->transfer_dma = dma_map_page(
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
hcd->self.sysdev,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
sg_page(sg),
sg->offset,
urb->transfer_buffer_length,
dir);
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
if (dma_mapping_error(hcd->self.sysdev,
USB: Check results of dma_map_single In map_urb_for_dma(), the DMA address returned by dma_map_single() is not checked to determine if it is legal. This lack of checking contributed to a problem with the libertas wireless driver (http://marc.info/?l=linux-wireless&m=125695331205062&w=2). The difficulty was not detected until the buffer was unmapped. By this time memory corruption had occurred. The situation is fixed by testing the returned DMA address, and returning -EAGAIN if the address is invalid. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-05 23:37:03 +07:00
urb->transfer_dma))
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
ret = -EAGAIN;
else
urb->transfer_flags |= URB_DMA_MAP_PAGE;
usb: catch attempts to submit urbs with a vmalloc'd transfer buffer Save someone else the debug cycles of figuring out why a driver's transfer request is failing or causing undefined system behavior. Buffers submitted for dma must come from GFP allocated / DMA-able memory. Return -EAGAIN matching the return value for dma_mapping_error() cases. Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-08 23:25:56 +07:00
} else if (is_vmalloc_addr(urb->transfer_buffer)) {
WARN_ONCE(1, "transfer buffer not dma capable\n");
ret = -EAGAIN;
usb: core: Check URB setup_packet and transfer_buffer sanity Update usb_hcd_map_urb_for_dma() to check for an URB's setup_packet and transfer_buffer sanity. We first check that urb->setup_packet is neither coming from vmalloc space nor is an on stack buffer, and if that's the case, produce a warning and return an error. For urb->transfer_buffer there is an existing is_vmalloc_addr() check so we just supplement that with an object_is_on_stack() check, produce a warning if that is the case and also return an error. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-04-26 07:56:11 +07:00
} else if (object_is_on_stack(urb->transfer_buffer)) {
WARN_ONCE(1, "transfer buffer is on stack\n");
ret = -EAGAIN;
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
} else {
urb->transfer_dma = dma_map_single(
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
hcd->self.sysdev,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->transfer_buffer,
urb->transfer_buffer_length,
dir);
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
if (dma_mapping_error(hcd->self.sysdev,
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
urb->transfer_dma))
ret = -EAGAIN;
else
urb->transfer_flags |= URB_DMA_MAP_SINGLE;
}
USB: drop HCD_LOCAL_MEM flag With the addition of the local memory allocator, the HCD_LOCAL_MEM flag can be dropped and the checks against it replaced with a check for the localmem_pool ptr being initialized. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:43 +07:00
} else if (hcd->localmem_pool) {
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
ret = hcd_alloc_coherent(
urb->dev->bus, mem_flags,
&urb->transfer_dma,
&urb->transfer_buffer,
urb->transfer_buffer_length,
dir);
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
if (ret == 0)
urb->transfer_flags |= URB_MAP_LOCAL;
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
}
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
if (ret && (urb->transfer_flags & (URB_SETUP_MAP_SINGLE |
URB_SETUP_MAP_LOCAL)))
USB: HCD: Add usb_hcd prefix to exported functions The convention is to prefix symbols exported from the USB HCD core with "usb_hcd". This change makes unmap_urb_setup_for_dma() and unmap_urb_for_dma() consistent with that. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:47 +07:00
usb_hcd_unmap_urb_for_dma(hcd, urb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
return ret;
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
}
USB: HCD: Add driver hooks for (un)?map_urb_for_dma Provide optional hooks for the host controller driver to override the default DMA mapping and unmapping routines. In general, these shouldn't be necessary unless the host controller has special DMA requirements, such as alignment contraints. If these are not specified, the general usb_hcd_(un)?map_urb_for_dma functions will be used instead. Also, pass the status to unmap_urb_for_dma so it can know whether the DMA buffer has been overwritten. Finally, add a flag to be used by these implementations if they allocated a temporary buffer so it can be freed properly when unmapping. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:48 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_map_urb_for_dma);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
/*-------------------------------------------------------------------------*/
/* may be called in any context with a valid urb->dev usecount
* caller surrenders "ownership" of urb
* expects usb_submit_urb() to have sanity checked and conditioned all
* inputs in the urb
*/
int usb_hcd_submit_urb (struct urb *urb, gfp_t mem_flags)
{
int status;
struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
/* increment urb's reference count as part of giving it to the HCD
* (which will control it). HCD guarantees that it either returns
* an error or calls giveback(), but not both.
*/
usb_get_urb(urb);
atomic_inc(&urb->use_count);
USB: Export URB statistics for powertop powertop currently tracks interrupts generated by uhci, ehci, and ohci, but it has no way of telling which USB device to blame USB bus activity on. This patch exports the number of URBs that are submitted for a given device. Cat the file 'urbnum' in /sys/bus/usb/devices/.../ Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-04 04:56:03 +07:00
atomic_inc(&urb->dev->urbnum);
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
usbmon_urb_submit(&hcd->self, urb);
/* NOTE requirements on root-hub callers (usbfs and the hub
* driver, for now): URBs' urb->transfer_buffer must be
* valid and usb_buffer_{sync,unmap}() not be needed, since
* they could clobber root hub response data. Also, control
* URBs must be submitted in process context with interrupts
* enabled.
*/
usb: dma bounce buffer support usb: dma bounce buffer support V4 This patch adds dma bounce buffer support to the usb core. These buffers can be enabled with the HCD_LOCAL_MEM flag, and they make sure that all data passed to the host controller is allocated using dma_alloc_coherent(). Signed-off-by: Magnus Damm <damm@igel.co.jp> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23 13:58:35 +07:00
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
if (is_root_hub(urb->dev)) {
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
status = rh_urb_enqueue(hcd, urb);
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
} else {
status = map_urb_for_dma(hcd, urb, mem_flags);
if (likely(status == 0)) {
status = hcd->driver->urb_enqueue(hcd, urb, mem_flags);
if (unlikely(status))
USB: HCD: Add driver hooks for (un)?map_urb_for_dma Provide optional hooks for the host controller driver to override the default DMA mapping and unmapping routines. In general, these shouldn't be necessary unless the host controller has special DMA requirements, such as alignment contraints. If these are not specified, the general usb_hcd_(un)?map_urb_for_dma functions will be used instead. Also, pass the status to unmap_urb_for_dma so it can know whether the DMA buffer has been overwritten. Finally, add a flag to be used by these implementations if they allocated a temporary buffer so it can be freed properly when unmapping. Signed-off-by: Robert Morell <rmorell@nvidia.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-01-27 10:06:48 +07:00
unmap_urb_for_dma(hcd, urb);
USB: fix usbmon and DMA mapping for scatter-gather URBs This patch (as1368) fixes a rather obscure bug in usbmon: When tracing URBs sent by the scatter-gather library, it accesses the data buffers while they are still mapped for DMA. The solution is to move the mapping and unmapping out of the s-g library and into the usual place in hcd.c. This requires the addition of new URB flag bits to describe the kind of mapping needed, since we have to call dma_map_sg() if the HCD supports native scatter-gather operation and dma_map_page() if it doesn't. The nice thing about having the new flags is that they simplify the testing for unmapping. The patch removes the only caller of usb_buffer_[un]map_sg(), so those functions are #if'ed out. A later patch will remove them entirely. As a result of this change, urb->sg will be set in situations where it wasn't set previously. Hence the xhci and whci drivers are adjusted to test urb->num_sgs instead, which retains its original meaning and is nonzero only when the HCD has to handle a scatterlist. Finally, even when a submission error occurs we don't want to hand URBs to usbmon before they are unmapped. The submission path is rearranged so that map_urb_for_dma() is called only for non-root-hub URBs and unmap_urb_for_dma() is called immediately after a submission error. This simplifies the error handling. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-03 00:27:28 +07:00
}
}
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
if (unlikely(status)) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usbmon_urb_submit_error(&hcd->self, urb, status);
USB: centralize -EREMOTEIO handling This patch (as969) continues the ongoing changes to the way HCDs report URB statuses. The programming interface has been simplified by making usbcore responsible for clearing urb->hcpriv and for setting -EREMOTEIO status when an URB with the URB_SHORT_NOT_OK flag ends up as a short transfer. By moving the work out of the HCDs, this removes a fair amount of repeated code. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:39:21 +07:00
urb->hcpriv = NULL;
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
INIT_LIST_HEAD(&urb->urb_list);
atomic_dec(&urb->use_count);
USB: Export URB statistics for powertop powertop currently tracks interrupts generated by uhci, ehci, and ohci, but it has no way of telling which USB device to blame USB bus activity on. This patch exports the number of URBs that are submitted for a given device. Cat the file 'urbnum' in /sys/bus/usb/devices/.../ Signed-off-by: Sarah Sharp <sarah.a.sharp@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-04 04:56:03 +07:00
atomic_dec(&urb->dev->urbnum);
USB: mark "reject" field of struct urb as atomic_t It is enough to protect accesses to reject field of urb by marking it as atomic_t,also it is the only reason of existence of usb_reject_lock,so remove the lock to make code more clean. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Acked-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-12-12 20:38:45 +07:00
if (atomic_read(&urb->reject))
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
wake_up(&usb_kill_urb_queue);
usb_put_urb(urb);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
return status;
}
/*-------------------------------------------------------------------------*/
/* this makes the hcd giveback() the urb more quickly, by kicking it
* off hardware queues (which may take a while) and returning it as
* soon as practical. we've already set up the urb's return status,
* but we can't know if the callback completed already.
*/
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
static int unlink1(struct usb_hcd *hcd, struct urb *urb, int status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
int value;
USB: change name of spinlock in hcd.c This patch (as940 renames hcd_data_lock in hcd.c to hcd_urb_list_lock, which is more descriptive of the lock's job. It also introduces a convenient inline routine for testing whether a particular USB device is a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:14:24 +07:00
if (is_root_hub(urb->dev))
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
value = usb_rh_urb_dequeue(hcd, urb, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
else {
/* The only reason an HCD might fail this call is if
* it has not yet fully queued the urb to begin with.
* Such failures should be harmless. */
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
value = hcd->driver->urb_dequeue(hcd, urb, status);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
return value;
}
/*
* called in any context
*
* caller guarantees urb won't be recycled till both unlink()
* and the urb's completion function return
*/
USB: remove struct usb_operations All of the currently-supported USB host controller drivers use the HCD bus-glue framework. As part of the program for flattening out the glue layer, this patch (as769) removes the usb_operations structure. All function calls now go directly to the HCD routines (slightly renamed to remain within the "usb_" namespace). The patch also removes usb_alloc_bus(), because it's not useful in the HCD framework and it wasn't referenced anywhere. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:27:36 +07:00
int usb_hcd_unlink_urb (struct urb *urb, int status)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
struct usb_hcd *hcd;
USB: fix use-after-free bug in usb_hcd_unlink_urb() The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31 00:58:26 +07:00
struct usb_device *udev = urb->dev;
USB: fix crash when URBs are unlinked after the device is gone This patch (as1151) protects usbcore against drivers that try to unlink an URB after the URB's device or bus have been removed. The core does not currently check for this, and certain drivers can cause a crash if they are running while an HCD is unloaded. Certainly it would be best to fix the guilty drivers. But a little defensive programming doesn't hurt, especially since it appears that quite a few drivers need to be fixed. The patch prevents the problem by grabbing a reference to the device while an unlink is in progress and using a new spinlock to synchronize unlinks with device removal. (There's no need to acquire a reference to the bus as well, since the device structure itself keeps a reference to the bus.) In addition, the kerneldoc is updated to indicate that URBs should not be unlinked after the disconnect method returns. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 02:28:46 +07:00
int retval = -EIDRM;
unsigned long flags;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: fix crash when URBs are unlinked after the device is gone This patch (as1151) protects usbcore against drivers that try to unlink an URB after the URB's device or bus have been removed. The core does not currently check for this, and certain drivers can cause a crash if they are running while an HCD is unloaded. Certainly it would be best to fix the guilty drivers. But a little defensive programming doesn't hurt, especially since it appears that quite a few drivers need to be fixed. The patch prevents the problem by grabbing a reference to the device while an unlink is in progress and using a new spinlock to synchronize unlinks with device removal. (There's no need to acquire a reference to the bus as well, since the device structure itself keeps a reference to the bus.) In addition, the kerneldoc is updated to indicate that URBs should not be unlinked after the disconnect method returns. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 02:28:46 +07:00
/* Prevent the device and bus from going away while
* the unlink is carried out. If they are already gone
* then urb->use_count must be 0, since disconnected
* devices can't have any active URBs.
*/
spin_lock_irqsave(&hcd_urb_unlink_lock, flags);
if (atomic_read(&urb->use_count) > 0) {
retval = 0;
USB: fix use-after-free bug in usb_hcd_unlink_urb() The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31 00:58:26 +07:00
usb_get_dev(udev);
USB: fix crash when URBs are unlinked after the device is gone This patch (as1151) protects usbcore against drivers that try to unlink an URB after the URB's device or bus have been removed. The core does not currently check for this, and certain drivers can cause a crash if they are running while an HCD is unloaded. Certainly it would be best to fix the guilty drivers. But a little defensive programming doesn't hurt, especially since it appears that quite a few drivers need to be fixed. The patch prevents the problem by grabbing a reference to the device while an unlink is in progress and using a new spinlock to synchronize unlinks with device removal. (There's no need to acquire a reference to the bus as well, since the device structure itself keeps a reference to the bus.) In addition, the kerneldoc is updated to indicate that URBs should not be unlinked after the disconnect method returns. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 02:28:46 +07:00
}
spin_unlock_irqrestore(&hcd_urb_unlink_lock, flags);
if (retval == 0) {
hcd = bus_to_hcd(urb->dev->bus);
retval = unlink1(hcd, urb, status);
USB: fix use-after-free bug in usb_hcd_unlink_urb() The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31 00:58:26 +07:00
if (retval == 0)
retval = -EINPROGRESS;
else if (retval != -EIDRM && retval != -EBUSY)
USB: core: replace %p with %pK Format specifier %p can leak kernel addresses while not valuing the kptr_restrict system settings. When kptr_restrict is set to (1), kernel pointers printed using the %pK format specifier will be replaced with Zeros. Debugging Note : &pK prints only Zeros as address. If you need actual address information, write 0 to kptr_restrict. echo 0 > /proc/sys/kernel/kptr_restrict [Found by poking around in a random vendor kernel tree, it would be nice if someone would actually send these types of patches upstream - gkh] Signed-off-by: Vamsi Krishna Samavedam <vskrishn@codeaurora.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-16 19:38:08 +07:00
dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
USB: fix use-after-free bug in usb_hcd_unlink_urb() The usb_hcd_unlink_urb() routine in hcd.c contains two possible use-after-free errors. The dev_dbg() statement at the end of the routine dereferences urb and urb->dev even though both structures may have been deallocated. This patch fixes the problem by storing urb->dev in a local variable (avoiding the dereference of urb) and moving the dev_dbg() up before the usb_put_dev() call. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Joe Lawrence <joe.lawrence@stratus.com> Tested-by: Joe Lawrence <joe.lawrence@stratus.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <greg@kroah.com>
2015-01-31 00:58:26 +07:00
urb, retval);
usb_put_dev(udev);
USB: fix crash when URBs are unlinked after the device is gone This patch (as1151) protects usbcore against drivers that try to unlink an URB after the URB's device or bus have been removed. The core does not currently check for this, and certain drivers can cause a crash if they are running while an HCD is unloaded. Certainly it would be best to fix the guilty drivers. But a little defensive programming doesn't hurt, especially since it appears that quite a few drivers need to be fixed. The patch prevents the problem by grabbing a reference to the device while an unlink is in progress and using a new spinlock to synchronize unlinks with device removal. (There's no need to acquire a reference to the bus as well, since the device structure itself keeps a reference to the bus.) In addition, the kerneldoc is updated to indicate that URBs should not be unlinked after the disconnect method returns. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 02:28:46 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return retval;
}
/*-------------------------------------------------------------------------*/
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
static void __usb_hcd_giveback_urb(struct urb *urb)
{
struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus);
usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done usb_wait_anchor_empty_timeout() should wait till the completion handler has run. Both the zd1211rw driver and the uas driver (in its task mgmt) depend on the completion handler having completed when usb_wait_anchor_empty_timeout() returns, as they read state set by the completion handler after an usb_wait_anchor_empty_timeout() call. But __usb_hcd_giveback_urb() calls usb_unanchor_urb before calling the completion handler. This is necessary as the completion handler may re-submit and re-anchor the urb. But this introduces a race where the state these drivers want to read has not been set yet by the completion handler (this race is easily triggered with the uas task mgmt code). I've considered adding an anchor_count to struct urb, which would be incremented on anchor and decremented on unanchor, and then only actually do the anchor / unanchor on 0 -> 1 and 1 -> 0 transtions, combined with moving the unanchor call in hcd_giveback_urb to after calling the completion handler. But this will only work if urb's are only re-anchored to the same anchor as they were anchored to before the completion handler ran. And at least one driver re-anchors to another anchor from the completion handler (rtlwifi). So I have come up with this patch instead, which adds the ability to suspend wakeups of usb_wait_anchor_empty_timeout() waiters to the usb_anchor functionality, and uses this in __usb_hcd_giveback_urb() to delay wake-ups until the completion handler has run. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-09 22:01:41 +07:00
struct usb_anchor *anchor = urb->anchor;
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
int status = urb->unlinked;
urb->hcpriv = NULL;
if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) &&
urb->actual_length < urb->transfer_buffer_length &&
!status))
status = -EREMOTEIO;
unmap_urb_for_dma(hcd, urb);
usbmon_urb_complete(&hcd->self, urb, status);
usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done usb_wait_anchor_empty_timeout() should wait till the completion handler has run. Both the zd1211rw driver and the uas driver (in its task mgmt) depend on the completion handler having completed when usb_wait_anchor_empty_timeout() returns, as they read state set by the completion handler after an usb_wait_anchor_empty_timeout() call. But __usb_hcd_giveback_urb() calls usb_unanchor_urb before calling the completion handler. This is necessary as the completion handler may re-submit and re-anchor the urb. But this introduces a race where the state these drivers want to read has not been set yet by the completion handler (this race is easily triggered with the uas task mgmt code). I've considered adding an anchor_count to struct urb, which would be incremented on anchor and decremented on unanchor, and then only actually do the anchor / unanchor on 0 -> 1 and 1 -> 0 transtions, combined with moving the unanchor call in hcd_giveback_urb to after calling the completion handler. But this will only work if urb's are only re-anchored to the same anchor as they were anchored to before the completion handler ran. And at least one driver re-anchors to another anchor from the completion handler (rtlwifi). So I have come up with this patch instead, which adds the ability to suspend wakeups of usb_wait_anchor_empty_timeout() waiters to the usb_anchor functionality, and uses this in __usb_hcd_giveback_urb() to delay wake-ups until the completion handler has run. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-09 22:01:41 +07:00
usb_anchor_suspend_wakeups(anchor);
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
usb_unanchor_urb(urb);
usb: Add LED triggers for USB activity With this patch, USB activity can be signaled by blinking a LED. There are two triggers, one for activity on USB host and one for USB gadget. Both triggers should work with all host/device controllers. Tested only with musb. Performace: I measured performance overheads on ARM Cortex-A8 (TI AM335x) running on 600 MHz. Duration of usb_led_activity(): - with no LED attached to the trigger: 2 ± 1 µs - with one GPIO LED attached to the trigger: 2 ± 1 µs or 8 ± 2 µs (two peaks in histogram) Duration of functions calling usb_led_activity() (with this patch applied and no LED attached to the trigger): - __usb_hcd_giveback_urb(): 10 - 25 µs - usb_gadget_giveback_request(): 2 - 6 µs Signed-off-by: Michal Sojka <sojka@merica.cz> Acked-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-25 03:43:21 +07:00
if (likely(status == 0))
usb_led_activity(USB_LED_EVENT_HOST);
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
/* pass ownership to the completion handler */
urb->status = status;
urb->complete(urb);
usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done usb_wait_anchor_empty_timeout() should wait till the completion handler has run. Both the zd1211rw driver and the uas driver (in its task mgmt) depend on the completion handler having completed when usb_wait_anchor_empty_timeout() returns, as they read state set by the completion handler after an usb_wait_anchor_empty_timeout() call. But __usb_hcd_giveback_urb() calls usb_unanchor_urb before calling the completion handler. This is necessary as the completion handler may re-submit and re-anchor the urb. But this introduces a race where the state these drivers want to read has not been set yet by the completion handler (this race is easily triggered with the uas task mgmt code). I've considered adding an anchor_count to struct urb, which would be incremented on anchor and decremented on unanchor, and then only actually do the anchor / unanchor on 0 -> 1 and 1 -> 0 transtions, combined with moving the unanchor call in hcd_giveback_urb to after calling the completion handler. But this will only work if urb's are only re-anchored to the same anchor as they were anchored to before the completion handler ran. And at least one driver re-anchors to another anchor from the completion handler (rtlwifi). So I have come up with this patch instead, which adds the ability to suspend wakeups of usb_wait_anchor_empty_timeout() waiters to the usb_anchor functionality, and uses this in __usb_hcd_giveback_urb() to delay wake-ups until the completion handler has run. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Oliver Neukum <oliver@neukum.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-09 22:01:41 +07:00
usb_anchor_resume_wakeups(anchor);
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
atomic_dec(&urb->use_count);
if (unlikely(atomic_read(&urb->reject)))
wake_up(&usb_kill_urb_queue);
usb_put_urb(urb);
}
static void usb_giveback_urb_bh(unsigned long param)
{
struct giveback_urb_bh *bh = (struct giveback_urb_bh *)param;
struct list_head local_list;
spin_lock_irq(&bh->lock);
bh->running = true;
restart:
list_replace_init(&bh->head, &local_list);
spin_unlock_irq(&bh->lock);
while (!list_empty(&local_list)) {
struct urb *urb;
urb = list_entry(local_list.next, struct urb, urb_list);
list_del_init(&urb->urb_list);
USB: see if URB comes from a completion handler Now that URBs can be completed inside tasklets, we need a way of determining whether a completion handler for a given endpoint is currently running. Otherwise it's not possible to maintain the API guarantee about keeping isochronous streams synchronous when an underrun occurs. This patch adds a field and a routine to check whether a completion handler for a periodic endpoint is running. At the moment no analogous routine appears to be necessary for async endpoints, but one can always be added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-04 00:58:43 +07:00
bh->completing_ep = urb->ep;
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
__usb_hcd_giveback_urb(urb);
USB: see if URB comes from a completion handler Now that URBs can be completed inside tasklets, we need a way of determining whether a completion handler for a given endpoint is currently running. Otherwise it's not possible to maintain the API guarantee about keeping isochronous streams synchronous when an underrun occurs. This patch adds a field and a routine to check whether a completion handler for a periodic endpoint is running. At the moment no analogous routine appears to be necessary for async endpoints, but one can always be added. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-04 00:58:43 +07:00
bh->completing_ep = NULL;
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
}
/* check if there are new URBs to giveback */
spin_lock_irq(&bh->lock);
if (!list_empty(&bh->head))
goto restart;
bh->running = false;
spin_unlock_irq(&bh->lock);
}
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
/**
* usb_hcd_giveback_urb - return URB from HCD to device driver
* @hcd: host controller returning the URB
* @urb: urb being returned to the USB device driver.
USB: Eliminate urb->status usage! This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 02:42:24 +07:00
* @status: completion status code for the URB.
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
* Context: in_interrupt()
*
* This hands the URB from HCD to its USB device driver, using its
* completion function. The HCD has freed all per-urb resources
* (and is done using urb->hcpriv). It also released all HCD locks;
* the device driver won't cause problems if it frees, modifies,
* or resubmits this URB.
USB: add urb->unlinked field This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:40:36 +07:00
*
USB: Eliminate urb->status usage! This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 02:42:24 +07:00
* If @urb was unlinked, the value of @status will be overridden by
USB: add urb->unlinked field This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:40:36 +07:00
* @urb->unlinked. Erroneous short transfers are detected in case
* the HCD hasn't checked for them.
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
*/
USB: Eliminate urb->status usage! This patch (as979) removes the last vestiges of urb->status from the host controller drivers and the root-hub emulator. Now the field doesn't get set until just before the URB's completion routine is called. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-25 02:42:24 +07:00
void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status)
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
{
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
struct giveback_urb_bh *bh;
bool running, high_prio_bh;
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
/* pass status to tasklet via unlinked */
if (likely(!urb->unlinked))
urb->unlinked = status;
USB: fix mistake in usb_hcd_giveback_urb This patch (as971) fixes a small mistake: The URB's completion status needs to be adjusted before the URB is passed to usmon_urb_complete(), not afterward. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-23 00:06:53 +07:00
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
if (!hcd_giveback_urb_in_bh(hcd) && !is_root_hub(urb->dev)) {
__usb_hcd_giveback_urb(urb);
return;
}
if (usb_pipeisoc(urb->pipe) || usb_pipeint(urb->pipe)) {
bh = &hcd->high_prio_bh;
high_prio_bh = true;
} else {
bh = &hcd->low_prio_bh;
high_prio_bh = false;
}
spin_lock(&bh->lock);
list_add_tail(&urb->urb_list, &bh->head);
running = bh->running;
spin_unlock(&bh->lock);
if (running)
;
else if (high_prio_bh)
tasklet_hi_schedule(&bh->bh);
else
tasklet_schedule(&bh->bh);
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb);
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
/*-------------------------------------------------------------------------*/
USB: break apart flush_endpoint and disable_endpoint This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 22:33:05 +07:00
/* Cancel all URBs pending on this endpoint and wait for the endpoint's
* queue to drain completely. The caller must first insure that no more
* URBs can be submitted for this endpoint.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
USB: break apart flush_endpoint and disable_endpoint This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 22:33:05 +07:00
void usb_hcd_flush_endpoint(struct usb_device *udev,
USB: remove struct usb_operations All of the currently-supported USB host controller drivers use the HCD bus-glue framework. As part of the program for flattening out the glue layer, this patch (as769) removes the usb_operations structure. All function calls now go directly to the HCD routines (slightly renamed to remain within the "usb_" namespace). The patch also removes usb_alloc_bus(), because it's not useful in the HCD framework and it wasn't referenced anywhere. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:27:36 +07:00
struct usb_host_endpoint *ep)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
struct usb_hcd *hcd;
struct urb *urb;
USB: break apart flush_endpoint and disable_endpoint This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 22:33:05 +07:00
if (!ep)
return;
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
might_sleep();
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:32:52 +07:00
hcd = bus_to_hcd(udev->bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: break apart flush_endpoint and disable_endpoint This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 22:33:05 +07:00
/* No more submits can occur */
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
spin_lock_irq(&hcd_urb_list_lock);
USB HCD: avoid duplicate local_irq_disable() Arnd Bergmann wrote: usb_hcd_flush_endpoint() has a retry loop that starts with a spin_lock_irq(), but only gives up the spinlock, not the irq_disable before jumping to the rescan label. Alan Stern: I agree with your sentiment, but it would be better to solve this problem without using local_irq_disable(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-22 06:13:10 +07:00
rescan:
usb: core: unlink urbs from the tail of the endpoint's urb_list While unlink an urb, if the urb has been programmed in the controller, the controller driver might do some hw related actions to tear down the urb. Currently usb_hcd_flush_endpoint() passes each urb from the head of the endpoint's urb_list to the controller driver, which could make the controller driver think each urb has been programmed and take the unnecessary actions for each urb. This patch changes the behavior in usb_hcd_flush_endpoint() to pass the urbs from the tail of the list, to avoid any unnecessary actions in an controller driver. Cc: stable@vger.kernel.org # v4.4+ Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-25 21:31:33 +07:00
list_for_each_entry_reverse(urb, &ep->urb_list, urb_list) {
USB: avoid using urb->pipe in usbcore This patch (as946) eliminates many of the uses of urb->pipe in usbcore. Unfortunately there will have to be a significant API change, affecting all USB drivers, before we can remove it entirely. This patch contents itself with changing only the interface to usb_buffer_map_sg() and friends: The pipe argument is replaced with a direction flag. That can be done easily because those routines get used in only one place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 04:07:21 +07:00
int is_in;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: add urb->unlinked field This patch (as970) adds a new urb->unlinked field, which is used to store the status of unlinked URBs since we can't use urb->status for that purpose any more. To help simplify the HCDs, usbcore will check urb->unlinked before calling the completion handler; if the value is set it will automatically override the status reported by the HCD. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> CC: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-22 02:40:36 +07:00
if (urb->unlinked)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
continue;
usb_get_urb (urb);
USB: avoid using urb->pipe in usbcore This patch (as946) eliminates many of the uses of urb->pipe in usbcore. Unfortunately there will have to be a significant API change, affecting all USB drivers, before we can remove it entirely. This patch contents itself with changing only the interface to usb_buffer_map_sg() and friends: The pipe argument is replaced with a direction flag. That can be done easily because those routines get used in only one place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-31 04:07:21 +07:00
is_in = usb_urb_dir_in(urb);
USB: change name of spinlock in hcd.c This patch (as940 renames hcd_data_lock in hcd.c to hcd_urb_list_lock, which is more descriptive of the lock's job. It also introduces a convenient inline routine for testing whether a particular USB device is a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:14:24 +07:00
spin_unlock(&hcd_urb_list_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
/* kick hcd */
unlink1(hcd, urb, -ESHUTDOWN);
dev_dbg (hcd->self.controller,
usb: introduce usb_ep_type_string() function In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-21 09:27:56 +07:00
"shutdown urb %pK ep%d%s-%s\n",
USB: make HCDs responsible for managing endpoint queues This patch (as954) implements a suggestion of David Brownell's. Now the host controller drivers are responsible for linking and unlinking URBs to/from their endpoint queues. This eliminates the possiblity of strange situations where usbcore thinks an URB is linked but the HCD thinks it isn't. It also means HCDs no longer have to check for URBs being dequeued before they were fully enqueued. In addition to the core changes, this requires changing every host controller driver and the root-hub URB handler. For the most part the required changes are fairly small; drivers have to call usb_hcd_link_urb_to_ep() in their urb_enqueue method, usb_hcd_check_unlink_urb() in their urb_dequeue method, and usb_hcd_unlink_urb_from_ep() before giving URBs back. A few HCDs make matters more complicated by the way they split up the flow of control. In addition some method interfaces get changed. The endpoint argument for urb_enqueue is now redundant so it is removed. The unlink status is required by usb_hcd_check_unlink_urb(), so it has been added to urb_dequeue. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: David Brownell <david-b@pacbell.net> CC: Olav Kongas <ok@artecdesign.ee> CC: Tony Olech <tony.olech@elandigitalsystems.com> CC: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-08 22:48:02 +07:00
urb, usb_endpoint_num(&ep->desc),
is_in ? "in" : "out",
usb: introduce usb_ep_type_string() function In some places, the code prints a human-readable USB endpoint transfer type (e.g. "bulk"). This involves a switch statement sometimes wrapped around in ({ ... }) block leading to code repetition. To make this scenario easier, here introduces usb_ep_type_string() function, which returns a human-readable name of provided endpoint type. It also changes a few places switch was used to use this new function. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-21 09:27:56 +07:00
usb_ep_type_string(usb_endpoint_type(&ep->desc)));
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb_put_urb (urb);
/* list contents may have changed */
USB HCD: avoid duplicate local_irq_disable() Arnd Bergmann wrote: usb_hcd_flush_endpoint() has a retry loop that starts with a spin_lock_irq(), but only gives up the spinlock, not the irq_disable before jumping to the rescan label. Alan Stern: I agree with your sentiment, but it would be better to solve this problem without using local_irq_disable(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-11-22 06:13:10 +07:00
spin_lock(&hcd_urb_list_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
goto rescan;
}
USB: separate out endpoint queue management and DMA mapping routines This patch (as953) separates out three key portions from usb_hcd_submit_urb(), usb_hcd_unlink_urb(), and usb_hcd_giveback_urb() and puts them in separate functions of their own. In the next patch, these functions will be called directly by host controller drivers while holding their private spinlocks, which will remove the possibility of some unpleasant races. The code responsible for mapping and unmapping DMA buffers is also placed into a couple of separate subroutines, for the sake of cleanliness and consistency. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-03 02:06:54 +07:00
spin_unlock_irq(&hcd_urb_list_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: break apart flush_endpoint and disable_endpoint This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 22:33:05 +07:00
/* Wait until the endpoint queue is completely empty */
usbcore: make hcd_endpoint_disable wait for queue to drain The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-12 03:01:45 +07:00
while (!list_empty (&ep->urb_list)) {
USB: change name of spinlock in hcd.c This patch (as940 renames hcd_data_lock in hcd.c to hcd_urb_list_lock, which is more descriptive of the lock's job. It also introduces a convenient inline routine for testing whether a particular USB device is a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:14:24 +07:00
spin_lock_irq(&hcd_urb_list_lock);
usbcore: make hcd_endpoint_disable wait for queue to drain The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-12 03:01:45 +07:00
/* The list may have changed while we acquired the spinlock */
urb = NULL;
if (!list_empty (&ep->urb_list)) {
urb = list_entry (ep->urb_list.prev, struct urb,
urb_list);
usb_get_urb (urb);
}
USB: change name of spinlock in hcd.c This patch (as940 renames hcd_data_lock in hcd.c to hcd_urb_list_lock, which is more descriptive of the lock's job. It also introduces a convenient inline routine for testing whether a particular USB device is a root hub. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:14:24 +07:00
spin_unlock_irq(&hcd_urb_list_lock);
usbcore: make hcd_endpoint_disable wait for queue to drain The inconsistent lock state problem in usbcore (the one that shows up when an HCD is unloaded) comes down to two inter-related problems: usb_rh_urb_dequeue() isn't set up to be called with interrupts disabled. hcd_endpoint_disable() doesn't wait for all URBs on the endpoint's queue to complete. The two problems are related because the one type of URB that isn't likely to be complete when hcd_endpoint_disable() returns is a root-hub URB. Right now usb_rh_urb_dequeue() waits for them to complete, and it assumes interrupts are enabled so it can wait. But hcd_endpoint_disable() calls it with interrupts disabled. Now, it should be legal to unlink root-hub URBs with interrupts disabled. The solution is to move the waiting into hcd_endpoint_disable(), where it belongs. This patch (as754) does that. It turns out to be completely safe to replace the del_timer_sync() with a simple del_timer(). It doesn't matter if the timer routine is running; hcd_root_hub_lock will synchronize the two threads and the status URB will complete with an unlink error, as it should. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-12 03:01:45 +07:00
if (urb) {
usb_kill_urb (urb);
usb_put_urb (urb);
}
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
/**
USB core: fix recent kernel-doc warnings Fix new kernel-doc warnings in usb core: Warning(drivers/usb/core/usb.c:79): No description found for parameter 'config' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'iface_num' Warning(drivers/usb/core/usb.c:79): No description found for parameter 'alt_num' Warning(drivers/usb/core/hcd.c:1622): No description found for parameter 'udev' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-14 01:17:16 +07:00
* usb_hcd_alloc_bandwidth - check whether a new bandwidth setting exceeds
* the bus bandwidth
* @udev: target &usb_device
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
* @new_config: new configuration to install
* @cur_alt: the current alternate interface setting
* @new_alt: alternate interface setting that is being installed
*
* To change configurations, pass in the new configuration in new_config,
* and pass NULL for cur_alt and new_alt.
*
* To reset a device's configuration (put the device in the ADDRESSED state),
* pass in NULL for new_config, cur_alt, and new_alt.
*
* To change alternate interface settings, pass in NULL for new_config,
* pass in the current alternate interface setting in cur_alt,
* and pass in the new alternate interface setting in new_alt.
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Return: An error if the requested bandwidth change exceeds the
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
* bus bandwidth or host controller internal resources.
USB: Support for bandwidth allocation. Originally, the USB core had no support for allocating bandwidth when a particular configuration or alternate setting for an interface was selected. Instead, the device driver's URB submission would fail if there was not enough bandwidth for a periodic endpoint. Drivers could work around this, by using the scatter-gather list API to guarantee bandwidth. This patch adds host controller API to allow the USB core to allocate or deallocate bandwidth for an endpoint. Endpoints are added to or dropped from a copy of the current schedule by calling add_endpoint() or drop_endpoint(), and then the schedule is atomically evaluated with a call to check_bandwidth(). This allows all the endpoints for a new configuration or alternate setting to be added at the same time that the endpoints from the old configuration or alt setting are dropped. Endpoints must be added to the schedule before any URBs are submitted to them. The HCD must be allowed to reject a new configuration or alt setting before the control transfer is sent to the device requesting the change. It may reject the change because there is not enough bandwidth, not enough internal resources (such as memory on an embedded host controller), or perhaps even for security reasons in a virtualized environment. If the call to check_bandwidth() fails, the USB core must call reset_bandwidth(). This causes the schedule to be reverted back to the state it was in just after the last successful check_bandwidth() call. If the call succeeds, the host controller driver (and hardware) will have changed its internal state to match the new configuration or alternate setting. The USB core can then issue a control transfer to the device to change the configuration or alt setting. This allows the core to test new configurations or alternate settings before unbinding drivers bound to interfaces in the old configuration. WIP: The USB core must add endpoints from all interfaces in a configuration to the schedule, because a driver may claim that interface at any time. A slight optimization might be to add the endpoints to the schedule once a driver claims that interface. FIXME This patch does not cover changing alternate settings, but it does handle a configuration change or de-configuration. FIXME The code for managing the schedule is currently HCD specific. A generic scheduling algorithm could be added for host controllers without built-in scheduling support. For now, if a host controller does not define the check_bandwidth() function, the call to usb_hcd_check_bandwidth() will always succeed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:58:26 +07:00
*/
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
int usb_hcd_alloc_bandwidth(struct usb_device *udev,
USB: Support for bandwidth allocation. Originally, the USB core had no support for allocating bandwidth when a particular configuration or alternate setting for an interface was selected. Instead, the device driver's URB submission would fail if there was not enough bandwidth for a periodic endpoint. Drivers could work around this, by using the scatter-gather list API to guarantee bandwidth. This patch adds host controller API to allow the USB core to allocate or deallocate bandwidth for an endpoint. Endpoints are added to or dropped from a copy of the current schedule by calling add_endpoint() or drop_endpoint(), and then the schedule is atomically evaluated with a call to check_bandwidth(). This allows all the endpoints for a new configuration or alternate setting to be added at the same time that the endpoints from the old configuration or alt setting are dropped. Endpoints must be added to the schedule before any URBs are submitted to them. The HCD must be allowed to reject a new configuration or alt setting before the control transfer is sent to the device requesting the change. It may reject the change because there is not enough bandwidth, not enough internal resources (such as memory on an embedded host controller), or perhaps even for security reasons in a virtualized environment. If the call to check_bandwidth() fails, the USB core must call reset_bandwidth(). This causes the schedule to be reverted back to the state it was in just after the last successful check_bandwidth() call. If the call succeeds, the host controller driver (and hardware) will have changed its internal state to match the new configuration or alternate setting. The USB core can then issue a control transfer to the device to change the configuration or alt setting. This allows the core to test new configurations or alternate settings before unbinding drivers bound to interfaces in the old configuration. WIP: The USB core must add endpoints from all interfaces in a configuration to the schedule, because a driver may claim that interface at any time. A slight optimization might be to add the endpoints to the schedule once a driver claims that interface. FIXME This patch does not cover changing alternate settings, but it does handle a configuration change or de-configuration. FIXME The code for managing the schedule is currently HCD specific. A generic scheduling algorithm could be added for host controllers without built-in scheduling support. For now, if a host controller does not define the check_bandwidth() function, the call to usb_hcd_check_bandwidth() will always succeed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:58:26 +07:00
struct usb_host_config *new_config,
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
struct usb_host_interface *cur_alt,
struct usb_host_interface *new_alt)
USB: Support for bandwidth allocation. Originally, the USB core had no support for allocating bandwidth when a particular configuration or alternate setting for an interface was selected. Instead, the device driver's URB submission would fail if there was not enough bandwidth for a periodic endpoint. Drivers could work around this, by using the scatter-gather list API to guarantee bandwidth. This patch adds host controller API to allow the USB core to allocate or deallocate bandwidth for an endpoint. Endpoints are added to or dropped from a copy of the current schedule by calling add_endpoint() or drop_endpoint(), and then the schedule is atomically evaluated with a call to check_bandwidth(). This allows all the endpoints for a new configuration or alternate setting to be added at the same time that the endpoints from the old configuration or alt setting are dropped. Endpoints must be added to the schedule before any URBs are submitted to them. The HCD must be allowed to reject a new configuration or alt setting before the control transfer is sent to the device requesting the change. It may reject the change because there is not enough bandwidth, not enough internal resources (such as memory on an embedded host controller), or perhaps even for security reasons in a virtualized environment. If the call to check_bandwidth() fails, the USB core must call reset_bandwidth(). This causes the schedule to be reverted back to the state it was in just after the last successful check_bandwidth() call. If the call succeeds, the host controller driver (and hardware) will have changed its internal state to match the new configuration or alternate setting. The USB core can then issue a control transfer to the device to change the configuration or alt setting. This allows the core to test new configurations or alternate settings before unbinding drivers bound to interfaces in the old configuration. WIP: The USB core must add endpoints from all interfaces in a configuration to the schedule, because a driver may claim that interface at any time. A slight optimization might be to add the endpoints to the schedule once a driver claims that interface. FIXME This patch does not cover changing alternate settings, but it does handle a configuration change or de-configuration. FIXME The code for managing the schedule is currently HCD specific. A generic scheduling algorithm could be added for host controllers without built-in scheduling support. For now, if a host controller does not define the check_bandwidth() function, the call to usb_hcd_check_bandwidth() will always succeed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:58:26 +07:00
{
int num_intfs, i, j;
USB: hcd.c: quiet NULL pointer sparse noise Quiet the following sparse noise: warning: Using plain integer as NULL pointer Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-11-18 05:53:41 +07:00
struct usb_host_interface *alt = NULL;
USB: Support for bandwidth allocation. Originally, the USB core had no support for allocating bandwidth when a particular configuration or alternate setting for an interface was selected. Instead, the device driver's URB submission would fail if there was not enough bandwidth for a periodic endpoint. Drivers could work around this, by using the scatter-gather list API to guarantee bandwidth. This patch adds host controller API to allow the USB core to allocate or deallocate bandwidth for an endpoint. Endpoints are added to or dropped from a copy of the current schedule by calling add_endpoint() or drop_endpoint(), and then the schedule is atomically evaluated with a call to check_bandwidth(). This allows all the endpoints for a new configuration or alternate setting to be added at the same time that the endpoints from the old configuration or alt setting are dropped. Endpoints must be added to the schedule before any URBs are submitted to them. The HCD must be allowed to reject a new configuration or alt setting before the control transfer is sent to the device requesting the change. It may reject the change because there is not enough bandwidth, not enough internal resources (such as memory on an embedded host controller), or perhaps even for security reasons in a virtualized environment. If the call to check_bandwidth() fails, the USB core must call reset_bandwidth(). This causes the schedule to be reverted back to the state it was in just after the last successful check_bandwidth() call. If the call succeeds, the host controller driver (and hardware) will have changed its internal state to match the new configuration or alternate setting. The USB core can then issue a control transfer to the device to change the configuration or alt setting. This allows the core to test new configurations or alternate settings before unbinding drivers bound to interfaces in the old configuration. WIP: The USB core must add endpoints from all interfaces in a configuration to the schedule, because a driver may claim that interface at any time. A slight optimization might be to add the endpoints to the schedule once a driver claims that interface. FIXME This patch does not cover changing alternate settings, but it does handle a configuration change or de-configuration. FIXME The code for managing the schedule is currently HCD specific. A generic scheduling algorithm could be added for host controllers without built-in scheduling support. For now, if a host controller does not define the check_bandwidth() function, the call to usb_hcd_check_bandwidth() will always succeed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:58:26 +07:00
int ret = 0;
struct usb_hcd *hcd;
struct usb_host_endpoint *ep;
hcd = bus_to_hcd(udev->bus);
if (!hcd->driver->check_bandwidth)
return 0;
/* Configuration is being removed - set configuration 0 */
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
if (!new_config && !cur_alt) {
USB: Support for bandwidth allocation. Originally, the USB core had no support for allocating bandwidth when a particular configuration or alternate setting for an interface was selected. Instead, the device driver's URB submission would fail if there was not enough bandwidth for a periodic endpoint. Drivers could work around this, by using the scatter-gather list API to guarantee bandwidth. This patch adds host controller API to allow the USB core to allocate or deallocate bandwidth for an endpoint. Endpoints are added to or dropped from a copy of the current schedule by calling add_endpoint() or drop_endpoint(), and then the schedule is atomically evaluated with a call to check_bandwidth(). This allows all the endpoints for a new configuration or alternate setting to be added at the same time that the endpoints from the old configuration or alt setting are dropped. Endpoints must be added to the schedule before any URBs are submitted to them. The HCD must be allowed to reject a new configuration or alt setting before the control transfer is sent to the device requesting the change. It may reject the change because there is not enough bandwidth, not enough internal resources (such as memory on an embedded host controller), or perhaps even for security reasons in a virtualized environment. If the call to check_bandwidth() fails, the USB core must call reset_bandwidth(). This causes the schedule to be reverted back to the state it was in just after the last successful check_bandwidth() call. If the call succeeds, the host controller driver (and hardware) will have changed its internal state to match the new configuration or alternate setting. The USB core can then issue a control transfer to the device to change the configuration or alt setting. This allows the core to test new configurations or alternate settings before unbinding drivers bound to interfaces in the old configuration. WIP: The USB core must add endpoints from all interfaces in a configuration to the schedule, because a driver may claim that interface at any time. A slight optimization might be to add the endpoints to the schedule once a driver claims that interface. FIXME This patch does not cover changing alternate settings, but it does handle a configuration change or de-configuration. FIXME The code for managing the schedule is currently HCD specific. A generic scheduling algorithm could be added for host controllers without built-in scheduling support. For now, if a host controller does not define the check_bandwidth() function, the call to usb_hcd_check_bandwidth() will always succeed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:58:26 +07:00
for (i = 1; i < 16; ++i) {
ep = udev->ep_out[i];
if (ep)
hcd->driver->drop_endpoint(hcd, udev, ep);
ep = udev->ep_in[i];
if (ep)
hcd->driver->drop_endpoint(hcd, udev, ep);
}
hcd->driver->check_bandwidth(hcd, udev);
return 0;
}
/* Check if the HCD says there's enough bandwidth. Enable all endpoints
* each interface's alt setting 0 and ask the HCD to check the bandwidth
* of the bus. There will always be bandwidth for endpoint 0, so it's
* ok to exclude it.
*/
if (new_config) {
num_intfs = new_config->desc.bNumInterfaces;
/* Remove endpoints (except endpoint 0, which is always on the
* schedule) from the old config from the schedule
*/
for (i = 1; i < 16; ++i) {
ep = udev->ep_out[i];
if (ep) {
ret = hcd->driver->drop_endpoint(hcd, udev, ep);
if (ret < 0)
goto reset;
}
ep = udev->ep_in[i];
if (ep) {
ret = hcd->driver->drop_endpoint(hcd, udev, ep);
if (ret < 0)
goto reset;
}
}
for (i = 0; i < num_intfs; ++i) {
USB: Use bInterfaceNumber in bandwidth allocations. USB devices do not have to sort interfaces in their descriptors based on the interface number, and they may choose to skip interface numbers. The USB bandwidth allocation code for installing a new configuration assumes the for loop variable will match the interface number. Make it use the interface number (bInterfaceNumber) in the descriptor instead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-06 05:33:29 +07:00
struct usb_host_interface *first_alt;
int iface_num;
first_alt = &new_config->intf_cache[i]->altsetting[0];
iface_num = first_alt->desc.bInterfaceNumber;
USB: Refactor code to find alternate interface settings. Refactor out the code to find alternate interface settings into usb_find_alt_setting(). Print a debugging message and return null if the alt setting is not found. While we're at it, correct a bug in the refactored code. The interfaces in the configuration's interface cache are not necessarily in numerical order, so we can't just use the interface number as an array index. Loop through the interface caches, looking for the correct interface. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:34 +07:00
/* Set up endpoints for alternate interface setting 0 */
USB: Use bInterfaceNumber in bandwidth allocations. USB devices do not have to sort interfaces in their descriptors based on the interface number, and they may choose to skip interface numbers. The USB bandwidth allocation code for installing a new configuration assumes the for loop variable will match the interface number. Make it use the interface number (bInterfaceNumber) in the descriptor instead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-06 05:33:29 +07:00
alt = usb_find_alt_setting(new_config, iface_num, 0);
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
if (!alt)
/* No alt setting 0? Pick the first setting. */
USB: Use bInterfaceNumber in bandwidth allocations. USB devices do not have to sort interfaces in their descriptors based on the interface number, and they may choose to skip interface numbers. The USB bandwidth allocation code for installing a new configuration assumes the for loop variable will match the interface number. Make it use the interface number (bInterfaceNumber) in the descriptor instead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-06 05:33:29 +07:00
alt = first_alt;
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
USB: Support for bandwidth allocation. Originally, the USB core had no support for allocating bandwidth when a particular configuration or alternate setting for an interface was selected. Instead, the device driver's URB submission would fail if there was not enough bandwidth for a periodic endpoint. Drivers could work around this, by using the scatter-gather list API to guarantee bandwidth. This patch adds host controller API to allow the USB core to allocate or deallocate bandwidth for an endpoint. Endpoints are added to or dropped from a copy of the current schedule by calling add_endpoint() or drop_endpoint(), and then the schedule is atomically evaluated with a call to check_bandwidth(). This allows all the endpoints for a new configuration or alternate setting to be added at the same time that the endpoints from the old configuration or alt setting are dropped. Endpoints must be added to the schedule before any URBs are submitted to them. The HCD must be allowed to reject a new configuration or alt setting before the control transfer is sent to the device requesting the change. It may reject the change because there is not enough bandwidth, not enough internal resources (such as memory on an embedded host controller), or perhaps even for security reasons in a virtualized environment. If the call to check_bandwidth() fails, the USB core must call reset_bandwidth(). This causes the schedule to be reverted back to the state it was in just after the last successful check_bandwidth() call. If the call succeeds, the host controller driver (and hardware) will have changed its internal state to match the new configuration or alternate setting. The USB core can then issue a control transfer to the device to change the configuration or alt setting. This allows the core to test new configurations or alternate settings before unbinding drivers bound to interfaces in the old configuration. WIP: The USB core must add endpoints from all interfaces in a configuration to the schedule, because a driver may claim that interface at any time. A slight optimization might be to add the endpoints to the schedule once a driver claims that interface. FIXME This patch does not cover changing alternate settings, but it does handle a configuration change or de-configuration. FIXME The code for managing the schedule is currently HCD specific. A generic scheduling algorithm could be added for host controllers without built-in scheduling support. For now, if a host controller does not define the check_bandwidth() function, the call to usb_hcd_check_bandwidth() will always succeed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:58:26 +07:00
for (j = 0; j < alt->desc.bNumEndpoints; j++) {
ret = hcd->driver->add_endpoint(hcd, udev, &alt->endpoint[j]);
if (ret < 0)
goto reset;
}
}
}
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
if (cur_alt && new_alt) {
USB: Fix duplicate sysfs problem after device reset. Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-07 01:16:51 +07:00
struct usb_interface *iface = usb_ifnum_to_if(udev,
cur_alt->desc.bInterfaceNumber);
USB: Avoid NULL pointer deref in usb_hcd_alloc_bandwidth. usb_ifnum_to_if() can return NULL if the USB device does not have a configuration installed (usb_device->actconfig == NULL), or if we can't find the interface number in the installed configuration. Return an error instead of crashing. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-08-10 06:31:54 +07:00
if (!iface)
return -EINVAL;
USB: Fix duplicate sysfs problem after device reset. Borislav Petkov reports issues with duplicate sysfs endpoint files after a resume from a hibernate. It turns out that the code to support alternate settings under xHCI has issues when a device with a non-default alternate setting is reset during the hibernate: [ 427.681810] Restarting tasks ... [ 427.681995] hub 1-0:1.0: state 7 ports 6 chg 0004 evt 0000 [ 427.682019] usb usb3: usb resume [ 427.682030] ohci_hcd 0000:00:12.0: wakeup root hub [ 427.682191] hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s [ 427.682205] usb 1-2: usb wakeup-resume [ 427.682226] usb 1-2: finish reset-resume [ 427.682886] done. [ 427.734658] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.734663] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.746682] hub 3-0:1.0: hub_reset_resume [ 427.746693] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 427.786715] usb 1-2: reset high speed USB device using ehci_hcd and address 2 [ 427.839653] ehci_hcd 0000:00:12.2: port 2 high speed [ 427.839666] ehci_hcd 0000:00:12.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT [ 427.847717] ohci_hcd 0000:00:12.0: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS [ 427.915497] hub 1-2:1.0: remove_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 1 [ 427.915774] hub 1-2:1.0: remove_intf_ep_devs: bNumEndpoints: 1 [ 427.915934] hub 1-2:1.0: if: ffff88022f9e8800: endpoint devs removed. [ 427.916158] hub 1-2:1.0: create_intf_ep_devs: if: ffff88022f9e8800 ->ep_devs_created: 0, ->unregistering: 0 [ 427.916434] hub 1-2:1.0: create_intf_ep_devs: bNumEndpoints: 1 [ 427.916609] ep_81: create, parent hub [ 427.916632] ------------[ cut here ]------------ [ 427.916644] WARNING: at fs/sysfs/dir.c:477 sysfs_add_one+0x82/0x96() [ 427.916649] Hardware name: System Product Name [ 427.916653] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.0/ep_81' [ 427.916658] Modules linked in: binfmt_misc kvm_amd kvm powernow_k8 cpufreq_ondemand cpufreq_powersave cpufreq_userspace freq_table cpufreq_conservative ipv6 vfat fat +8250_pnp 8250 pcspkr ohci_hcd serial_core k10temp edac_core [ 427.916694] Pid: 278, comm: khubd Not tainted 2.6.33-rc2-00187-g08d869a-dirty #13 [ 427.916699] Call Trace: The problem is caused by a mismatch between the USB core's view of the device state and the USB device and xHCI host's view of the device state. After the device reset and re-configuration, the device and the xHCI host think they are using alternate setting 0 of all interfaces. However, the USB core keeps track of the old state, which may include non-zero alternate settings. It uses intf->cur_altsetting to keep the endpoint sysfs files for the old state across the reset. The bandwidth allocation functions need to know what the xHCI host thinks the current alternate settings are, so original patch set intf->cur_altsetting to the alternate setting 0. This caused duplicate endpoint files to be created. The solution is to not set intf->cur_altsetting before calling usb_set_interface() in usb_reset_and_verify_device(). Instead, we add a new flag to struct usb_interface to tell usb_hcd_alloc_bandwidth() to use alternate setting 0 as the currently installed alternate setting. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Tested-by: Borislav Petkov <petkovbb@googlemail.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-07 01:16:51 +07:00
if (iface->resetting_device) {
/*
* The USB core just reset the device, so the xHCI host
* and the device will think alt setting 0 is installed.
* However, the USB core will pass in the alternate
* setting installed before the reset as cur_alt. Dig
* out the alternate setting 0 structure, or the first
* alternate setting if a broken device doesn't have alt
* setting 0.
*/
cur_alt = usb_altnum_to_altsetting(iface, 0);
if (!cur_alt)
cur_alt = &iface->altsetting[0];
}
USB: Check bandwidth when switching alt settings. Make the USB core check the bandwidth when switching from one interface alternate setting to another. Also check the bandwidth when resetting a configuration (so that alt setting 0 is used). If this check fails, the device's state is unchanged. If the device refuses the new alt setting, re-instate the old alt setting in the host controller hardware. If a USB device doesn't have an alternate interface setting 0, install the first alt setting in its descriptors when a new configuration is requested, or the device is reset. Add a mutex per root hub to protect bandwidth operations: adding/reseting/changing configurations, and changing alternate interface settings. We want to ensure that the xHCI host controller and the USB device are set up for the same configurations and alternate settings. There are two (possibly three) steps to do this: 1. The host controller needs to check that bandwidth is available for a different setting, by issuing and waiting for a configure endpoint command. 2. Once that returns successfully, a control message is sent to the device. 3. If that fails, the host controller must be notified through another configure endpoint command. The mutex is used to make these three operations seem atomic, to prevent another driver from using more bandwidth for a different device while we're in the middle of these operations. While we're touching the bandwidth code, rename usb_hcd_check_bandwidth() to usb_hcd_alloc_bandwidth(). This function does more than just check that the bandwidth change won't exceed the bus bandwidth; it actually changes the bandwidth configuration in the xHCI host controller. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-04 00:44:36 +07:00
/* Drop all the endpoints in the current alt setting */
for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) {
ret = hcd->driver->drop_endpoint(hcd, udev,
&cur_alt->endpoint[i]);
if (ret < 0)
goto reset;
}
/* Add all the endpoints in the new alt setting */
for (i = 0; i < new_alt->desc.bNumEndpoints; i++) {
ret = hcd->driver->add_endpoint(hcd, udev,
&new_alt->endpoint[i]);
if (ret < 0)
goto reset;
}
}
USB: Support for bandwidth allocation. Originally, the USB core had no support for allocating bandwidth when a particular configuration or alternate setting for an interface was selected. Instead, the device driver's URB submission would fail if there was not enough bandwidth for a periodic endpoint. Drivers could work around this, by using the scatter-gather list API to guarantee bandwidth. This patch adds host controller API to allow the USB core to allocate or deallocate bandwidth for an endpoint. Endpoints are added to or dropped from a copy of the current schedule by calling add_endpoint() or drop_endpoint(), and then the schedule is atomically evaluated with a call to check_bandwidth(). This allows all the endpoints for a new configuration or alternate setting to be added at the same time that the endpoints from the old configuration or alt setting are dropped. Endpoints must be added to the schedule before any URBs are submitted to them. The HCD must be allowed to reject a new configuration or alt setting before the control transfer is sent to the device requesting the change. It may reject the change because there is not enough bandwidth, not enough internal resources (such as memory on an embedded host controller), or perhaps even for security reasons in a virtualized environment. If the call to check_bandwidth() fails, the USB core must call reset_bandwidth(). This causes the schedule to be reverted back to the state it was in just after the last successful check_bandwidth() call. If the call succeeds, the host controller driver (and hardware) will have changed its internal state to match the new configuration or alternate setting. The USB core can then issue a control transfer to the device to change the configuration or alt setting. This allows the core to test new configurations or alternate settings before unbinding drivers bound to interfaces in the old configuration. WIP: The USB core must add endpoints from all interfaces in a configuration to the schedule, because a driver may claim that interface at any time. A slight optimization might be to add the endpoints to the schedule once a driver claims that interface. FIXME This patch does not cover changing alternate settings, but it does handle a configuration change or de-configuration. FIXME The code for managing the schedule is currently HCD specific. A generic scheduling algorithm could be added for host controllers without built-in scheduling support. For now, if a host controller does not define the check_bandwidth() function, the call to usb_hcd_check_bandwidth() will always succeed. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:58:26 +07:00
ret = hcd->driver->check_bandwidth(hcd, udev);
reset:
if (ret < 0)
hcd->driver->reset_bandwidth(hcd, udev);
return ret;
}
USB: break apart flush_endpoint and disable_endpoint This patch (as988) breaks usb_hcd_endpoint_disable() apart into two routines. The first, usb_hcd_flush_endpoint() does the -ESHUTDOWN unlinking of all URBs in the endpoint's queue and waits for them to complete. The second, usb_hcd_disable_endpoint() -- renamed for better grammatical style -- merely calls the HCD's endpoint_disable method. The changeover is easy because the routine currently has only one caller. This separation of function will be exploited in the following patch: When a device is suspended, the core will be able to cancel all outstanding URBs for that device while leaving the HCD's endpoint-related data structures intact for later. As an added benefit, HCDs no longer need to check for existing URBs in their endpoint_disable methods. It is now guaranteed that there will be none. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-09-10 22:33:05 +07:00
/* Disables the endpoint: synchronizes with the hcd to make sure all
* endpoint state is gone from hardware. usb_hcd_flush_endpoint() must
* have been called previously. Use for set_configuration, set_interface,
* driver removal, physical disconnect.
*
* example: a qh stored in ep->hcpriv, holding state related to endpoint
* type, maxpacket size, toggle, halt status, and scheduling.
*/
void usb_hcd_disable_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct usb_hcd *hcd;
might_sleep();
hcd = bus_to_hcd(udev->bus);
if (hcd->driver->endpoint_disable)
hcd->driver->endpoint_disable(hcd, ep);
}
USB: add reset endpoint operations Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel <david.vrabel@csr.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-09 00:36:28 +07:00
/**
* usb_hcd_reset_endpoint - reset host endpoint state
* @udev: USB device.
* @ep: the endpoint to reset.
*
* Resets any host endpoint state such as the toggle bit, sequence
* number and current window.
*/
void usb_hcd_reset_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep)
{
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
if (hcd->driver->endpoint_reset)
hcd->driver->endpoint_reset(hcd, ep);
else {
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
int is_control = usb_endpoint_xfer_control(&ep->desc);
usb_settoggle(udev, epnum, is_out, 0);
if (is_control)
usb_settoggle(udev, epnum, !is_out, 0);
}
}
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
/**
* usb_alloc_streams - allocate bulk endpoint stream IDs.
* @interface: alternate setting that includes all endpoints.
* @eps: array of endpoints that need streams.
* @num_eps: number of endpoints in the array.
* @num_streams: number of streams to allocate.
* @mem_flags: flags hcd should use to allocate memory.
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Sets up a group of bulk endpoints to have @num_streams stream IDs available.
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
* Drivers may queue multiple transfers to different stream IDs, which may
* complete in a different order than they were queued.
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
*
* Return: On success, the number of allocated streams. On failure, a negative
* error code.
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
*/
int usb_alloc_streams(struct usb_interface *interface,
struct usb_host_endpoint **eps, unsigned int num_eps,
unsigned int num_streams, gfp_t mem_flags)
{
struct usb_hcd *hcd;
struct usb_device *dev;
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
int i, ret;
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
dev = interface_to_usbdev(interface);
hcd = bus_to_hcd(dev->bus);
if (!hcd->driver->alloc_streams || !hcd->driver->free_streams)
return -EINVAL;
usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-10 14:59:25 +07:00
if (dev->speed < USB_SPEED_SUPER)
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
return -EINVAL;
usb: Do not allow usb_alloc_streams on unconfigured devices This commit fixes the following oops: [10238.622067] scsi host3: uas_eh_bus_reset_handler start [10240.766164] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd [10245.779365] usb 3-4: device descriptor read/8, error -110 [10245.883331] usb 3-4: reset SuperSpeed USB device number 3 using xhci_hcd [10250.897603] usb 3-4: device descriptor read/8, error -110 [10251.058200] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [10251.058244] IP: [<ffffffff815ac6e1>] xhci_check_streams_endpoint+0x91/0x140 <snip> [10251.059473] Call Trace: [10251.059487] [<ffffffff815aca6c>] xhci_calculate_streams_and_bitmask+0xbc/0x130 [10251.059520] [<ffffffff815aeb5f>] xhci_alloc_streams+0x10f/0x5a0 [10251.059548] [<ffffffff810a4685>] ? check_preempt_curr+0x75/0xa0 [10251.059575] [<ffffffff810a46dc>] ? ttwu_do_wakeup+0x2c/0x100 [10251.059601] [<ffffffff810a49e6>] ? ttwu_do_activate.constprop.111+0x66/0x70 [10251.059635] [<ffffffff815779ab>] usb_alloc_streams+0xab/0xf0 [10251.059662] [<ffffffffc0616b48>] uas_configure_endpoints+0x128/0x150 [uas] [10251.059694] [<ffffffffc0616bac>] uas_post_reset+0x3c/0xb0 [uas] [10251.059722] [<ffffffff815727d9>] usb_reset_device+0x1b9/0x2a0 [10251.059749] [<ffffffffc0616f42>] uas_eh_bus_reset_handler+0xb2/0x190 [uas] [10251.059781] [<ffffffff81514293>] scsi_try_bus_reset+0x53/0x110 [10251.059808] [<ffffffff815163b7>] scsi_eh_bus_reset+0xf7/0x270 <snip> The problem is the following call sequence (simplified): 1) usb_reset_device 2) usb_reset_and_verify_device 2) hub_port_init 3) hub_port_finish_reset 3) xhci_discover_or_reset_device This frees xhci->devs[slot_id]->eps[ep_index].ring for all eps but 0 4) usb_get_device_descriptor This fails 5) hub_port_init fails 6) usb_reset_and_verify_device fails, does not restore device config 7) uas_post_reset 8) xhci_alloc_streams NULL deref on the free-ed ring This commit fixes this by not allowing usb_alloc_streams to continue if the device is not configured. Note that we do allow usb_free_streams to continue after a (logical) disconnect, as it is necessary to explicitly free the streams at the xhci controller level. Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-10-01 16:29:14 +07:00
if (dev->state < USB_STATE_CONFIGURED)
return -ENODEV;
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
for (i = 0; i < num_eps; i++) {
/* Streams only apply to bulk endpoints. */
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
if (!usb_endpoint_xfer_bulk(&eps[i]->desc))
return -EINVAL;
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
/* Re-alloc is not allowed */
if (eps[i]->streams)
return -EINVAL;
}
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps,
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
num_streams, mem_flags);
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
if (ret < 0)
return ret;
for (i = 0; i < num_eps; i++)
eps[i]->streams = ret;
return ret;
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
}
EXPORT_SYMBOL_GPL(usb_alloc_streams);
/**
* usb_free_streams - free bulk endpoint stream IDs.
* @interface: alternate setting that includes all endpoints.
* @eps: array of endpoints to remove streams from.
* @num_eps: number of endpoints in the array.
* @mem_flags: flags hcd should use to allocate memory.
*
* Reverts a group of bulk endpoints back to not using stream IDs.
* Can fail if we are given bad arguments, or HCD is broken.
usb-core: Make usb_free_streams return an error The hcd-driver free_streams method can return an error, so lets properly propagate that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30 19:03:59 +07:00
*
usb-core: Fix usb_free_streams return value documentation Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:23 +07:00
* Return: 0 on success. On failure, a negative error code.
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
*/
usb-core: Make usb_free_streams return an error The hcd-driver free_streams method can return an error, so lets properly propagate that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30 19:03:59 +07:00
int usb_free_streams(struct usb_interface *interface,
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
struct usb_host_endpoint **eps, unsigned int num_eps,
gfp_t mem_flags)
{
struct usb_hcd *hcd;
struct usb_device *dev;
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
int i, ret;
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
dev = interface_to_usbdev(interface);
hcd = bus_to_hcd(dev->bus);
usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus USB3.1 devices Add a new USB_SPEED_SUPER_PLUS device speed, and make sure usb core can handle the new speed. In most cases the behaviour is the same as with USB_SPEED_SUPER SuperSpeed devices. In a few places we add a "Plus" string to inform the user of the new speed. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-10 14:59:25 +07:00
if (dev->speed < USB_SPEED_SUPER)
usb-core: Make usb_free_streams return an error The hcd-driver free_streams method can return an error, so lets properly propagate that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30 19:03:59 +07:00
return -EINVAL;
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
/* Double-free is not allowed */
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
for (i = 0; i < num_eps; i++)
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
if (!eps[i] || !eps[i]->streams)
usb-core: Make usb_free_streams return an error The hcd-driver free_streams method can return an error, so lets properly propagate that. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-30 19:03:59 +07:00
return -EINVAL;
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
usb-core: Track if an endpoint has streams This is a preparation patch for adding support for bulk streams to usbfs. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-10-09 22:19:25 +07:00
ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags);
if (ret < 0)
return ret;
for (i = 0; i < num_eps; i++)
eps[i]->streams = 0;
return ret;
USB: Support for allocating USB 3.0 streams. Bulk endpoint streams were added in the USB 3.0 specification. Streams allow a device driver to overload a bulk endpoint so that multiple transfers can be queued at once. The device then decides which transfer it wants to work on first, and can queue part of a transfer before it switches to a new stream. All this switching is invisible to the device driver, which just gets a completion for the URB. Drivers that use streams must be able to handle URBs completing in a different order than they were submitted to the endpoint. This requires adding new API to set up xHCI data structures to support multiple queues ("stream rings") per endpoint. Drivers will allocate a number of stream IDs before enqueueing URBs to the bulk endpoints of the device, and free the stream IDs in their disconnect function. See Documentation/usb/bulk-streams.txt for details. The new mass storage device class, USB Attached SCSI Protocol (UASP), uses these streams API. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-06 00:55:58 +07:00
}
EXPORT_SYMBOL_GPL(usb_free_streams);
USB: fix crash when URBs are unlinked after the device is gone This patch (as1151) protects usbcore against drivers that try to unlink an URB after the URB's device or bus have been removed. The core does not currently check for this, and certain drivers can cause a crash if they are running while an HCD is unloaded. Certainly it would be best to fix the guilty drivers. But a little defensive programming doesn't hurt, especially since it appears that quite a few drivers need to be fixed. The patch prevents the problem by grabbing a reference to the device while an unlink is in progress and using a new spinlock to synchronize unlinks with device removal. (There's no need to acquire a reference to the bus as well, since the device structure itself keeps a reference to the bus.) In addition, the kerneldoc is updated to indicate that URBs should not be unlinked after the disconnect method returns. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-10-22 02:28:46 +07:00
/* Protect against drivers that try to unlink URBs after the device
* is gone, by waiting until all unlinks for @udev are finished.
* Since we don't currently track URBs by device, simply wait until
* nothing is running in the locked region of usb_hcd_unlink_urb().
*/
void usb_hcd_synchronize_unlinks(struct usb_device *udev)
{
spin_lock_irq(&hcd_urb_unlink_lock);
spin_unlock_irq(&hcd_urb_unlink_lock);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
/* called in any context */
int usb_hcd_get_frame_number (struct usb_device *udev)
{
struct usb_hcd *hcd = bus_to_hcd(udev->bus);
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
if (!HCD_RH_RUNNING(hcd))
USB: move routines in hcd.c This patch (as939) moves a couple of routine in hcd.c around. The purpose is to put all the general URB- and endpoint-related routines (submit, unlink, giveback, and disable) together in one spot. There are no functional changes. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-18 23:08:02 +07:00
return -ESHUTDOWN;
return hcd->driver->get_frame_number (hcd);
}
/*-------------------------------------------------------------------------*/
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
#ifdef CONFIG_PM
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-26 04:39:18 +07:00
int hcd_bus_suspend(struct usb_device *rhdev, pm_message_t msg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
USB: core, wusbcore: use bus_to_hcd Use bus_to_hcd() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-23 20:26:51 +07:00
struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
int status;
int old_state = hcd->state;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: Add wakeup info to debugging messages This patch (as1487) improves the usbcore debugging output for port suspend and bus suspend, by stating whether or not remote wakeup is enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-28 02:54:22 +07:00
dev_dbg(&rhdev->dev, "bus %ssuspend, wakeup %d\n",
(PMSG_IS_AUTO(msg) ? "auto-" : ""),
rhdev->do_remote_wakeup);
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
if (HCD_DEAD(hcd)) {
dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
return 0;
}
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
if (!hcd->driver->bus_suspend) {
status = -ENOENT;
} else {
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
hcd->state = HC_STATE_QUIESCING;
status = hcd->driver->bus_suspend(hcd);
}
if (status == 0) {
usb_set_device_state(rhdev, USB_STATE_SUSPENDED);
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
hcd->state = HC_STATE_SUSPENDED;
USB: fix race between root-hub suspend and remote wakeup This patch (as1533) fixes a race between root-hub suspend and remote wakeup. If a wakeup event occurs while a root hub is suspending, it might not cause the suspend to fail. Although the host controller drivers check for pending wakeup events at the start of their bus_suspend routines, they generally do not check for wakeup events while the routines are running. In addition, if a wakeup event occurs any time after khubd is frozen and before the root hub is fully suspended, it might not cause a system sleep transition to fail. For example, the host controller drivers do not fail root-hub suspends when a connect-change event is pending. To fix both these issues, this patch causes hcd_bus_suspend() to query the controller driver's hub_status_data method after a root hub is suspended, if the root hub is enabled for wakeup. Any pending status changes will count as wakeup events, causing the root hub to be resumed and the overall suspend to fail with -EBUSY. A significant point is that not all events are reflected immediately in the status bits. Both EHCI and UHCI controllers notify the CPU when remote wakeup begins on a port, but the port's suspend-change status bit doesn't get set until after the port has completed the transition out of the suspend state, some 25 milliseconds later. Consequently, the patch will interpret any nonzero return value from hub_status_data as indicating a pending event, even if none of the status bits are set in the data buffer. Follow-up patches make the necessary changes to ehci-hcd and uhci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Chen Peter-B29397 <B29397@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-04 02:24:18 +07:00
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
if (!PMSG_IS_AUTO(msg))
usb: core: use phy_exit during suspend if wake up is not supported If the USB controller can wake up the system (which is the case for example with the Mediatek USB3 IP) then we must not call phy_exit during suspend to ensure that the USB controller doesn't have to re-enumerate the devices during resume. However, if the USB controller cannot wake up the system (which is the case for example on various TI platforms using a dwc3 controller) then we must call phy_exit during suspend. Otherwise the PHY driver keeps the clocks enabled, which prevents the system from reaching the lowest power levels in the suspend state. Solve this by introducing two new functions in the PHY wrapper which are dedicated to the suspend and resume handling. If the controller can wake up the system the new usb_phy_roothub_suspend function will simply call usb_phy_roothub_power_off. However, if wake up is not supported by the controller it will also call usb_phy_roothub_exit. The also new usb_phy_roothub_resume function takes care of calling usb_phy_roothub_init (if the controller can't wake up the system) in addition to usb_phy_roothub_power_on. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Fixes: 178a0bce05cbc1 ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Reported-by: Roger Quadros <rogerq@ti.com> Suggested-by: Roger Quadros <rogerq@ti.com> Suggested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 02:39:48 +07:00
usb_phy_roothub_suspend(hcd->self.sysdev,
hcd->phy_roothub);
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
USB: fix race between root-hub suspend and remote wakeup This patch (as1533) fixes a race between root-hub suspend and remote wakeup. If a wakeup event occurs while a root hub is suspending, it might not cause the suspend to fail. Although the host controller drivers check for pending wakeup events at the start of their bus_suspend routines, they generally do not check for wakeup events while the routines are running. In addition, if a wakeup event occurs any time after khubd is frozen and before the root hub is fully suspended, it might not cause a system sleep transition to fail. For example, the host controller drivers do not fail root-hub suspends when a connect-change event is pending. To fix both these issues, this patch causes hcd_bus_suspend() to query the controller driver's hub_status_data method after a root hub is suspended, if the root hub is enabled for wakeup. Any pending status changes will count as wakeup events, causing the root hub to be resumed and the overall suspend to fail with -EBUSY. A significant point is that not all events are reflected immediately in the status bits. Both EHCI and UHCI controllers notify the CPU when remote wakeup begins on a port, but the port's suspend-change status bit doesn't get set until after the port has completed the transition out of the suspend state, some 25 milliseconds later. Consequently, the patch will interpret any nonzero return value from hub_status_data as indicating a pending event, even if none of the status bits are set in the data buffer. Follow-up patches make the necessary changes to ehci-hcd and uhci-hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> CC: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: Chen Peter-B29397 <B29397@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-04-04 02:24:18 +07:00
/* Did we race with a root-hub wakeup event? */
if (rhdev->do_remote_wakeup) {
char buffer[6];
status = hcd->driver->hub_status_data(hcd, buffer);
if (status != 0) {
dev_dbg(&rhdev->dev, "suspend raced with wakeup event\n");
hcd_bus_resume(rhdev, PMSG_AUTO_RESUME);
status = -EBUSY;
}
}
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
} else {
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
spin_lock_irq(&hcd_root_hub_lock);
if (!HCD_DEAD(hcd)) {
set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
hcd->state = old_state;
}
spin_unlock_irq(&hcd_root_hub_lock);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
"suspend", status);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
}
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
return status;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: Enhance usage of pm_message_t This patch (as1177) modifies the USB core suspend and resume routines. The resume functions now will take a pm_message_t argument, so they will know what sort of resume is occurring. The new argument is also passed to the port suspend/resume and bus suspend/resume routines (although they don't use it for anything but debugging). In addition, special pm_message_t values are used for user-initiated, device-initiated (i.e., remote wakeup), and automatic suspend/resume. By testing these values, drivers can tell whether or not a particular suspend was an autosuspend. Unfortunately, they can't do the same for resumes -- not until the pm_message_t argument is also passed to the drivers' resume methods. That will require a bigger change. IMO, the whole Power Management framework should have been set up this way in the first place. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-26 04:39:18 +07:00
int hcd_bus_resume(struct usb_device *rhdev, pm_message_t msg)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
USB: core, wusbcore: use bus_to_hcd Use bus_to_hcd() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-23 20:26:51 +07:00
struct usb_hcd *hcd = bus_to_hcd(rhdev->bus);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
int status;
USB: Don't resume root hub if the controller is suspended Root hubs can't be resumed if their parent controller device is still suspended. This patch (as925) adds a check for that condition in hcd_bus_resume() and prevents it from being treated as a fatal controller failure. ehci-hcd is updated to add the corresponding test. Unnecessary debugging messages are removed from uhci-hcd and dummy-hcd. The error return code from dummy-hcd is changed to -ESHUTDOWN, the same as the others. ohci-hcd doesn't need any changes. Suspend handling in the non-PCI host drivers is somewhat hit-and-miss. This patch shouldn't have any effect on them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-22 03:25:35 +07:00
int old_state = hcd->state;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: Add wakeup info to debugging messages This patch (as1487) improves the usbcore debugging output for port suspend and bus suspend, by stating whether or not remote wakeup is enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-09-28 02:54:22 +07:00
dev_dbg(&rhdev->dev, "usb %sresume\n",
(PMSG_IS_AUTO(msg) ? "auto-" : ""));
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
if (HCD_DEAD(hcd)) {
dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
return 0;
}
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
if (!PMSG_IS_AUTO(msg)) {
usb: core: use phy_exit during suspend if wake up is not supported If the USB controller can wake up the system (which is the case for example with the Mediatek USB3 IP) then we must not call phy_exit during suspend to ensure that the USB controller doesn't have to re-enumerate the devices during resume. However, if the USB controller cannot wake up the system (which is the case for example on various TI platforms using a dwc3 controller) then we must call phy_exit during suspend. Otherwise the PHY driver keeps the clocks enabled, which prevents the system from reaching the lowest power levels in the suspend state. Solve this by introducing two new functions in the PHY wrapper which are dedicated to the suspend and resume handling. If the controller can wake up the system the new usb_phy_roothub_suspend function will simply call usb_phy_roothub_power_off. However, if wake up is not supported by the controller it will also call usb_phy_roothub_exit. The also new usb_phy_roothub_resume function takes care of calling usb_phy_roothub_init (if the controller can't wake up the system) in addition to usb_phy_roothub_power_on. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Fixes: 178a0bce05cbc1 ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Reported-by: Roger Quadros <rogerq@ti.com> Suggested-by: Roger Quadros <rogerq@ti.com> Suggested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 02:39:48 +07:00
status = usb_phy_roothub_resume(hcd->self.sysdev,
hcd->phy_roothub);
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
if (status)
return status;
}
[PATCH] USB: Rename hcd->hub_suspend to hcd->bus_suspend This patch (as580) is perhaps the only result from the long discussion I had with David about his changes to the root-hub suspend/resume code. It renames the hub_suspend and hub_resume methods in struct usb_hcd to bus_suspend and bus_resume. These are more descriptive names, since the methods really do suspend or resume an entire USB bus, and less likely to be confused with the hub_suspend and hub_resume routines in hub.c. It also takes David's advice about removing the layer of bus glue, where those methods are called. And it implements a related change that David made to the other HCDs but forgot to put into dummy_hcd. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-14 04:08:02 +07:00
if (!hcd->driver->bus_resume)
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
return -ENOENT;
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
if (HCD_RH_RUNNING(hcd))
[PATCH] root hub changes (lesser half) This patch collects various small updates related to root hubs, to shrink later patches which build on them. - For root hub suspend/resume support: * Make the existing usb_hcd_resume_root_hub() routine respect pmcore locking, exporting and using the dpm_runtime_resume() method. * Add a new usb_hcd_suspend_root_hub() to pair with that routine. (Essential to make OHCI autosuspend behave again...) * HC_SUSPENDED by itself only refers to the root hub's downstream ports. So let HCDs see root hub URBs unless the parent device is suspended. - Remove an assertion we no longer need (and now, also don't want). - Generic suspend/resume updates to work better with swsusp. * Ignore the FREEZE vs SUSPEND distinction for hardware; trying to use it breaks the swsusp snapshots it's supposed to help (sigh). * On resume, mark devices as resumed right away, but then do nothing else if the device is marked NOTATTACHED. These changes shouldn't be very noticable by themselves. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/base/power/runtime.c | 1 drivers/usb/core/hcd.c | 64 ++++++++++++++++++++++++++++++++++++++----- drivers/usb/core/hcd.h | 1 drivers/usb/core/hub.c | 45 ++++++++++++++++++++++++------ drivers/usb/core/usb.c | 20 +++++++++---- drivers/usb/core/usb.h | 1 6 files changed, 111 insertions(+), 21 deletions(-)
2005-09-23 12:32:24 +07:00
return 0;
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
hcd->state = HC_STATE_RESUMING;
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
status = hcd->driver->bus_resume(hcd);
USB: fix race between root-hub resume and wakeup requests The USB core keeps track of pending resume requests for root hubs, in order to resolve races between wakeup requests and suspends. However the code that does this is subject to another race (between wakeup requests and resumes) because the WAKEUP_PENDING flag is cleared before the resume occurs, leaving a window in which another wakeup request might arrive. This patch (as1447) fixes the problem by clearing the WAKEUP_PENDING flag after the resume instead of before it. This fixes Bugzilla #24952. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Paul Bender <pebender@san.rr.com> Tested-by: warpme <warpme@o2.pl> Cc: stable <stable@kernel.org> [.36+] Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-02-03 01:59:33 +07:00
clear_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
if (status == 0) {
USB: speed up usb_bus_resume() This patch (as1620) speeds up USB root-hub resumes in the common case where every enabled port has its suspend feature set (which currently will be true for every runtime resume of the root hub). If all the enabled ports are suspended then resuming the root hub won't resume any of the downstream devices. In this case there's no need for a Resume Recovery delay, because that delay is meant to give devices a chance to get ready for active use. To keep track of the port suspend features, the patch adds a "port_is_suspended" flag to struct usb_device. This has to be tracked separately from the device's state; it's entirely possible for a USB-2 device to be suspended while the suspend feature on its parent port is clear. The reason is that devices will go into suspend whenever their parent hub does. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Peter Chen <peter.chen@freescale.com> Tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-19 22:03:39 +07:00
struct usb_device *udev;
int port1;
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
spin_lock_irq(&hcd_root_hub_lock);
if (!HCD_DEAD(hcd)) {
usb_set_device_state(rhdev, rhdev->actconfig
? USB_STATE_CONFIGURED
: USB_STATE_ADDRESS);
set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
hcd->state = HC_STATE_RUNNING;
}
spin_unlock_irq(&hcd_root_hub_lock);
USB: speed up usb_bus_resume() This patch (as1620) speeds up USB root-hub resumes in the common case where every enabled port has its suspend feature set (which currently will be true for every runtime resume of the root hub). If all the enabled ports are suspended then resuming the root hub won't resume any of the downstream devices. In this case there's no need for a Resume Recovery delay, because that delay is meant to give devices a chance to get ready for active use. To keep track of the port suspend features, the patch adds a "port_is_suspended" flag to struct usb_device. This has to be tracked separately from the device's state; it's entirely possible for a USB-2 device to be suspended while the suspend feature on its parent port is clear. The reason is that devices will go into suspend whenever their parent hub does. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reviewed-by: Peter Chen <peter.chen@freescale.com> Tested-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-10-19 22:03:39 +07:00
/*
* Check whether any of the enabled ports on the root hub are
* unsuspended. If they are then a TRSMRCY delay is needed
* (this is what the USB-2 spec calls a "global resume").
* Otherwise we can skip the delay.
*/
usb_hub_for_each_child(rhdev, port1, udev) {
if (udev->state != USB_STATE_NOTATTACHED &&
!udev->port_is_suspended) {
usleep_range(10000, 11000); /* TRSMRCY */
break;
}
}
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
} else {
USB: Don't resume root hub if the controller is suspended Root hubs can't be resumed if their parent controller device is still suspended. This patch (as925) adds a check for that condition in hcd_bus_resume() and prevents it from being treated as a fatal controller failure. ehci-hcd is updated to add the corresponding test. Unnecessary debugging messages are removed from uhci-hcd and dummy-hcd. The error return code from dummy-hcd is changed to -ESHUTDOWN, the same as the others. ohci-hcd doesn't need any changes. Suspend handling in the non-PCI host drivers is somewhat hit-and-miss. This patch shouldn't have any effect on them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-22 03:25:35 +07:00
hcd->state = old_state;
usb: core: use phy_exit during suspend if wake up is not supported If the USB controller can wake up the system (which is the case for example with the Mediatek USB3 IP) then we must not call phy_exit during suspend to ensure that the USB controller doesn't have to re-enumerate the devices during resume. However, if the USB controller cannot wake up the system (which is the case for example on various TI platforms using a dwc3 controller) then we must call phy_exit during suspend. Otherwise the PHY driver keeps the clocks enabled, which prevents the system from reaching the lowest power levels in the suspend state. Solve this by introducing two new functions in the PHY wrapper which are dedicated to the suspend and resume handling. If the controller can wake up the system the new usb_phy_roothub_suspend function will simply call usb_phy_roothub_power_off. However, if wake up is not supported by the controller it will also call usb_phy_roothub_exit. The also new usb_phy_roothub_resume function takes care of calling usb_phy_roothub_init (if the controller can't wake up the system) in addition to usb_phy_roothub_power_on. Fixes: 07dbff0ddbd86c ("usb: core: add a wrapper for the USB PHYs on the HCD") Fixes: 178a0bce05cbc1 ("usb: core: hcd: integrate the PHY wrapper into the HCD core") Reported-by: Roger Quadros <rogerq@ti.com> Suggested-by: Roger Quadros <rogerq@ti.com> Suggested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 02:39:48 +07:00
usb_phy_roothub_suspend(hcd->self.sysdev, hcd->phy_roothub);
USB: separate root and non-root suspend/resume This patch (as916) completes the separation of code paths for suspend and resume of root hubs as opposed to non-root devices. Root hubs will be power-managed through their bus_suspend and bus_resume methods, whereas normal devices will use usb_port_suspend() and usb_port_resume(). Changes to the hcd_bus_{suspend,resume} routines mostly represent motion of code that was already present elsewhere. They include: Adding debugging log messages, Setting the device state appropriately, and Adding a resume recovery time delay. Changes to the port-suspend and port-resume routines in hub.c include: Removal of checks for root devices (since they will never be triggered), and Removal of checks for NULL or invalid device pointers (these were left over from earlier kernel versions and aren't needed at all). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-05-31 02:34:36 +07:00
dev_dbg(&rhdev->dev, "bus %s fail, err %d\n",
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
"resume", status);
USB: Don't resume root hub if the controller is suspended Root hubs can't be resumed if their parent controller device is still suspended. This patch (as925) adds a check for that condition in hcd_bus_resume() and prevents it from being treated as a fatal controller failure. ehci-hcd is updated to add the corresponding test. Unnecessary debugging messages are removed from uhci-hcd and dummy-hcd. The error return code from dummy-hcd is changed to -ESHUTDOWN, the same as the others. ohci-hcd doesn't need any changes. Suspend handling in the non-PCI host drivers is somewhat hit-and-miss. This patch shouldn't have any effect on them. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-06-22 03:25:35 +07:00
if (status != -ESHUTDOWN)
usb_hc_died(hcd);
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
}
return status;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 03:37:30 +07:00
/* Workqueue routine for root-hub remote wakeup */
static void hcd_resume_work(struct work_struct *work)
{
struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
struct usb_device *udev = hcd->self.root_hub;
USB: consolidate remote wakeup routines This patch (as1324) makes a small change to the code used for remote wakeup of root hubs. hcd_resume_work() now calls the hub driver's remote-wakeup routine instead of implementing its own version. The patch is complicated by the need to rename remote_wakeup() to usb_remote_wakeup(), make it non-static, and declare it in a header file. There's also the additional complication required to make everything work when CONFIG_PM isn't set; the do-nothing inline routine had to be moved into the header file. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-09 00:56:30 +07:00
usb_remote_wakeup(udev);
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 03:37:30 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/**
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
* usb_hcd_resume_root_hub - called by HCD to resume its root hub
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
* @hcd: host controller for this root hub
*
* The USB host controller calls this function when its root hub is
* suspended (with the remote wakeup feature enabled) and a remote
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 03:37:30 +07:00
* wakeup request is received. The routine submits a workqueue request
* to resume the root hub (that is, manage its downstream ports again).
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
void usb_hcd_resume_root_hub (struct usb_hcd *hcd)
{
unsigned long flags;
spin_lock_irqsave (&hcd_root_hub_lock, flags);
USB: fix race between root-hub wakeup & controller suspend This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup races. This is another general race pattern, similar to the "open vs. unregister" race we're all familiar with. Here, the race is between suspending a device and receiving a wakeup request from one of the device's suspended children. In particular, if a root-hub wakeup is requested at about the same time as the corresponding USB controller is suspended, and if the controller is enabled for wakeup, then the controller should either fail to suspend or else wake right back up again. During system sleep this won't happen very much, especially since host controllers generally aren't enabled for wakeup during sleep. However it is definitely an issue for runtime PM. Something like this will be needed to prevent the controller from autosuspending while waiting for a root-hub resume to take place. (That is, in fact, the common case, for which there is an extra test.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-26 01:02:35 +07:00
if (hcd->rh_registered) {
USB: Increment wakeup count on remote wakeup. On chromebooks we depend on wakeup count to identify the wakeup source. But currently USB devices do not increment the wakeup count when they trigger the remote wake. This patch addresses the same. Resume condition is reported differently on USB 2.0 and USB 3.0 devices. On USB 2.0 devices, a wake capable device, if wake enabled, drives resume signal to indicate a remote wake (USB 2.0 spec section 7.1.7.7). The upstream facing port then sets C_PORT_SUSPEND bit and reports a port change event (USB 2.0 spec section 11.24.2.7.2.3). Thus if a port has resumed before driving the resume signal from the host and C_PORT_SUSPEND is set, then the device attached to the given port might be the reason for the last system wakeup. Increment the wakeup count for the same. On USB 3.0 devices, a function may signal that it wants to exit from device suspend by sending a Function Wake Device Notification to the host (USB3.0 spec section 8.5.6.4) Thus on receiving the Function Wake, increment the wakeup count. Signed-off-by: Ravi Chandra Sadineni <ravisadineni@chromium.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-21 01:08:21 +07:00
pm_wakeup_event(&hcd->self.root_hub->dev, 0);
USB: fix race between root-hub wakeup & controller suspend This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup races. This is another general race pattern, similar to the "open vs. unregister" race we're all familiar with. Here, the race is between suspending a device and receiving a wakeup request from one of the device's suspended children. In particular, if a root-hub wakeup is requested at about the same time as the corresponding USB controller is suspended, and if the controller is enabled for wakeup, then the controller should either fail to suspend or else wake right back up again. During system sleep this won't happen very much, especially since host controllers generally aren't enabled for wakeup during sleep. However it is definitely an issue for runtime PM. Something like this will be needed to prevent the controller from autosuspending while waiting for a root-hub resume to take place. (That is, in fact, the common case, for which there is an extra test.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-26 01:02:35 +07:00
set_bit(HCD_FLAG_WAKEUP_PENDING, &hcd->flags);
USB: convert to the runtime PM framework This patch (as1329) converts the USB stack over to the PM core's runtime PM framework. This involves numerous changes throughout usbcore, especially to hub.c and driver.c. Perhaps the most notable change is that CONFIG_USB_SUSPEND now depends on CONFIG_PM_RUNTIME instead of CONFIG_PM. Several fields in the usb_device and usb_interface structures are no longer needed. Some code which used to depend on CONFIG_USB_PM now depends on CONFIG_USB_SUSPEND (requiring some rearrangement of header files). The only visible change in behavior should be that following a system sleep (resume from RAM or resume from hibernation), autosuspended USB devices will be resumed just like everything else. They won't remain suspended. But if they aren't in use then they will naturally autosuspend again in a few seconds. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-01-09 00:57:28 +07:00
queue_work(pm_wq, &hcd->wakeup_work);
USB: fix race between root-hub wakeup & controller suspend This patch (as1395) adds code to hcd_pci_suspend() for handling wakeup races. This is another general race pattern, similar to the "open vs. unregister" race we're all familiar with. Here, the race is between suspending a device and receiving a wakeup request from one of the device's suspended children. In particular, if a root-hub wakeup is requested at about the same time as the corresponding USB controller is suspended, and if the controller is enabled for wakeup, then the controller should either fail to suspend or else wake right back up again. During system sleep this won't happen very much, especially since host controllers generally aren't enabled for wakeup during sleep. However it is definitely an issue for runtime PM. Something like this will be needed to prevent the controller from autosuspending while waiting for a root-hub resume to take place. (That is, in fact, the common case, for which there is an extra test.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-26 01:02:35 +07:00
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
}
[PATCH] all HCDs provide root hub suspend/resume methods This cleans up a small recent FIXME, ensuring that all the HCDs provide root hub suspend/resume methods. It also wraps the calls to those root suspend routines just like on the PCI "USB_SUSPEND not defined" cases, so non-PCI bus glue won't be as tempted to behave very differently. Several of the SOC based OHCI drivers forgot to list those methods; the patch also adds those missing declarations. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/usb/core/hcd.c | 42 +++++++++++++++++++++++++--------------- drivers/usb/host/ohci-au1xxx.c | 5 ++++ drivers/usb/host/ohci-lh7a404.c | 5 ++++ drivers/usb/host/ohci-pxa27x.c | 1 drivers/usb/host/ohci-s3c2410.c | 1 drivers/usb/host/ohci-sa1111.c | 1 6 files changed, 40 insertions(+), 15 deletions(-)
2005-09-23 12:32:11 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_resume_root_hub);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB / PM: Drop CONFIG_PM_RUNTIME from the USB core After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-30 05:47:05 +07:00
#endif /* CONFIG_PM */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_USB_OTG
/**
* usb_bus_start_enum - start immediate enumeration (for OTG)
* @bus: the bus (must use hcd framework)
* @port_num: 1-based number of port; usually bus->otg_port
* Context: in_interrupt()
*
* Starts enumeration, with an immediate reset followed later by
usb: hub: rename khubd to hub_wq in documentation and comments USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 22:32:23 +07:00
* hub_wq identifying and possibly configuring the device.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
* This is needed by OTG controller drivers, where it helps meet
* HNP protocol timing requirements for starting a port reset.
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
*
* Return: 0 if successful.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
int usb_bus_start_enum(struct usb_bus *bus, unsigned port_num)
{
struct usb_hcd *hcd;
int status = -EOPNOTSUPP;
/* NOTE: since HNP can't start by grabbing the bus's address0_sem,
* boards with root hubs hooked up to internal devices (instead of
* just the OTG port) may need more attention to resetting...
*/
USB: core, wusbcore: use bus_to_hcd Use bus_to_hcd() instead of open-coding it. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-23 20:26:51 +07:00
hcd = bus_to_hcd(bus);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (port_num && hcd->driver->start_port_reset)
status = hcd->driver->start_port_reset(hcd, port_num);
usb: hub: rename khubd to hub_wq in documentation and comments USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 22:32:23 +07:00
/* allocate hub_wq shortly after (first) root port reset finishes;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
* it may issue others, until at least 50 msecs have passed.
*/
if (status == 0)
mod_timer(&hcd->rh_timer, jiffies + msecs_to_jiffies(10));
return status;
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_bus_start_enum);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
#endif
/*-------------------------------------------------------------------------*/
/**
* usb_hcd_irq - hook IRQs to HCD framework (bus glue)
* @irq: the IRQ being raised
* @__hcd: pointer to the HCD whose IRQ is being signaled
*
* If the controller isn't HALTed, calls the driver's irq handler.
* Checks whether the controller is now dead.
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
*
* Return: %IRQ_HANDLED if the IRQ was handled. %IRQ_NONE otherwise.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 20:55:46 +07:00
irqreturn_t usb_hcd_irq (int irq, void *__hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
struct usb_hcd *hcd = __hcd;
USB: fix interrupt disabling for HCDs with shared interrupt handlers USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by: Stefan Becker <stefan.becker@nokia.com> Cc: stable <stable@kernel.org> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-01 23:19:22 +07:00
irqreturn_t rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: Remove the SAW_IRQ hcd flag The HCD_FLAG_SAW_IRQ flag was introduced in order to catch IRQ routing errors: If an URB was unlinked and the host controller hadn't gotten any IRQs, it seemed likely that the IRQs were directed to the wrong vector. This warning hasn't come up in many years, as far as I know; interrupt routing now seems to be well under control. Therefore there's no reason to keep the flag around any more. This patch (as1495) finally removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-03 23:03:38 +07:00
if (unlikely(HCD_DEAD(hcd) || !HCD_HW_ACCESSIBLE(hcd)))
USB: fix interrupt disabling for HCDs with shared interrupt handlers USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by: Stefan Becker <stefan.becker@nokia.com> Cc: stable <stable@kernel.org> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-01 23:19:22 +07:00
rc = IRQ_NONE;
USB: Remove the SAW_IRQ hcd flag The HCD_FLAG_SAW_IRQ flag was introduced in order to catch IRQ routing errors: If an URB was unlinked and the host controller hadn't gotten any IRQs, it seemed likely that the IRQs were directed to the wrong vector. This warning hasn't come up in many years, as far as I know; interrupt routing now seems to be well under control. Therefore there's no reason to keep the flag around any more. This patch (as1495) finally removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-03 23:03:38 +07:00
else if (hcd->driver->irq(hcd) == IRQ_NONE)
USB: fix interrupt disabling for HCDs with shared interrupt handlers USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by: Stefan Becker <stefan.becker@nokia.com> Cc: stable <stable@kernel.org> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-01 23:19:22 +07:00
rc = IRQ_NONE;
USB: Remove the SAW_IRQ hcd flag The HCD_FLAG_SAW_IRQ flag was introduced in order to catch IRQ routing errors: If an URB was unlinked and the host controller hadn't gotten any IRQs, it seemed likely that the IRQs were directed to the wrong vector. This warning hasn't come up in many years, as far as I know; interrupt routing now seems to be well under control. Therefore there's no reason to keep the flag around any more. This patch (as1495) finally removes it. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-11-03 23:03:38 +07:00
else
USB: fix interrupt disabling for HCDs with shared interrupt handlers USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by: Stefan Becker <stefan.becker@nokia.com> Cc: stable <stable@kernel.org> Acked-by: David Brownell <david-b@pacbell.net> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-07-01 23:19:22 +07:00
rc = IRQ_HANDLED;
return rc;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: xHCI: Supporting MSI/MSI-X Enable MSI/MSI-X supporting in xhci driver. Provide the mechanism to fall back using MSI and Legacy IRQs if MSI-X IRQs register failed. Signed-off-by: Dong Nguyen <Dong.Nguyen@amd.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>, Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-07-22 06:56:08 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_irq);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
usb/hcd: Send a uevent signaling that the host controller had died This change will send an OFFLINE event to udev with the ERROR=DEAD environment variable set when the HC dies. By notifying user space the appropriate policies can be applied. i.e., * Collect error logs. * Notify the user that USB is no longer functional. * Perform a graceful reboot. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19 22:30:22 +07:00
/* Workqueue routine for when the root-hub has died. */
static void hcd_died_work(struct work_struct *work)
{
struct usb_hcd *hcd = container_of(work, struct usb_hcd, died_work);
static char *env[] = {
"ERROR=DEAD",
NULL
};
/* Notify user space that the host controller has died */
kobject_uevent_env(&hcd->self.root_hub->dev.kobj, KOBJ_OFFLINE, env);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/**
* usb_hc_died - report abnormal shutdown of a host controller (bus glue)
* @hcd: pointer to the HCD representing the controller
*
* This is called by bus glue to report a USB host controller that died
* while operations may still have been pending. It's called automatically
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
* by the PCI glue, so only glue for non-PCI busses should need to call it.
*
* Only call this function with the primary HCD.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
*/
void usb_hc_died (struct usb_hcd *hcd)
{
unsigned long flags;
dev_err (hcd->self.controller, "HC died; cleaning up\n");
spin_lock_irqsave (&hcd_root_hub_lock, flags);
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
set_bit(HCD_FLAG_DEAD, &hcd->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (hcd->rh_registered) {
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: hub: rename khubd to hub_wq in documentation and comments USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 22:32:23 +07:00
/* make hub_wq clean up old urbs and devices */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb_set_device_state (hcd->self.root_hub,
USB_STATE_NOTATTACHED);
usb: hub: rename usb_kick_khubd() to usb_kick_hub_wq() USB hub started to use a workqueue instead of kthread. Let's make it clear from the function names. Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 22:32:22 +07:00
usb_kick_hub_wq(hcd->self.root_hub);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
if (usb_hcd_is_primary_hcd(hcd) && hcd->shared_hcd) {
hcd = hcd->shared_hcd;
USB: hcd: Mark secondary HCD as dead if the primary one died Make usb_hc_died() clear the HCD_FLAG_RH_RUNNING flag for the shared HCD and set HCD_FLAG_DEAD for it, in analogy with what is done for the primary one. Among other thigs, this prevents check_root_hub_suspended() from returning -EBUSY for dead HCDs which helps to work around system suspend issues in some situations. This actually fixes occasional suspend failures on one of my test machines. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-07-26 04:58:50 +07:00
clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
set_bit(HCD_FLAG_DEAD, &hcd->flags);
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
if (hcd->rh_registered) {
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
usb: hub: rename khubd to hub_wq in documentation and comments USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 22:32:23 +07:00
/* make hub_wq clean up old urbs and devices */
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
usb_set_device_state(hcd->self.root_hub,
USB_STATE_NOTATTACHED);
usb: hub: rename usb_kick_khubd() to usb_kick_hub_wq() USB hub started to use a workqueue instead of kthread. Let's make it clear from the function names. Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 22:32:22 +07:00
usb_kick_hub_wq(hcd->self.root_hub);
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
}
}
usb/hcd: Send a uevent signaling that the host controller had died This change will send an OFFLINE event to udev with the ERROR=DEAD environment variable set when the HC dies. By notifying user space the appropriate policies can be applied. i.e., * Collect error logs. * Notify the user that USB is no longer functional. * Perform a graceful reboot. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19 22:30:22 +07:00
/* Handle the case where this function gets called with a shared HCD */
if (usb_hcd_is_primary_hcd(hcd))
schedule_work(&hcd->died_work);
else
schedule_work(&hcd->primary_hcd->died_work);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
spin_unlock_irqrestore (&hcd_root_hub_lock, flags);
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
/* Make sure that the other roothub is also deallocated. */
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
EXPORT_SYMBOL_GPL (usb_hc_died);
/*-------------------------------------------------------------------------*/
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
static void init_giveback_urb_bh(struct giveback_urb_bh *bh)
{
spin_lock_init(&bh->lock);
INIT_LIST_HEAD(&bh->head);
tasklet_init(&bh->bh, usb_giveback_urb_bh, (unsigned long)bh);
}
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
struct device *sysdev, struct device *dev, const char *bus_name,
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
struct usb_hcd *primary_hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
struct usb_hcd *hcd;
[PATCH] USB: convert kcalloc to kzalloc This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-07 05:18:34 +07:00
hcd = kzalloc(sizeof(*hcd) + driver->hcd_priv_size, GFP_KERNEL);
usb: core: hcd: don't print on ENOMEM All kmalloc-based functions print enough information on failures. Signed-off-by: Wolfram Sang <wsa-dev@sang-engineering.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-26 00:38:58 +07:00
if (!hcd)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return NULL;
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
if (primary_hcd == NULL) {
usb: core: hub: hub_port_init lock controller instead of bus The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [<ffffffff81b9bab7>] schedule+0x37/0x90 [<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0 [<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30 [<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150 [<ffffffff817db10c>] usb_control_msg+0xbc/0xf0 [<ffffffff817d07de>] hub_port_init+0x51e/0xb70 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Call Trace: [<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40 [<ffffffff817fd87e>] xhci_address_device+0xe/0x10 [<ffffffff817d047f>] hub_port_init+0x1bf/0xb70 [<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-25 19:48:38 +07:00
hcd->address0_mutex = kmalloc(sizeof(*hcd->address0_mutex),
GFP_KERNEL);
if (!hcd->address0_mutex) {
kfree(hcd);
dev_dbg(dev, "hcd address0 mutex alloc failed\n");
return NULL;
}
mutex_init(hcd->address0_mutex);
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
GFP_KERNEL);
if (!hcd->bandwidth_mutex) {
usb: core: fix potential memory leak in error path during hcd creation Free memory allocated for address0_mutex if allocation of bandwidth_mutex failed. Fixes: feb26ac31a2a ("usb: core: hub: hub_port_init lock controller instead of bus") Signed-off-by: Anton Bondarenko <anton.bondarenko.sama@gmail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-07 06:53:46 +07:00
kfree(hcd->address0_mutex);
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
kfree(hcd);
dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
return NULL;
}
mutex_init(hcd->bandwidth_mutex);
dev_set_drvdata(dev, hcd);
} else {
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
mutex_lock(&usb_port_peer_mutex);
usb: core: hub: hub_port_init lock controller instead of bus The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [<ffffffff81b9bab7>] schedule+0x37/0x90 [<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0 [<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30 [<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150 [<ffffffff817db10c>] usb_control_msg+0xbc/0xf0 [<ffffffff817d07de>] hub_port_init+0x51e/0xb70 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Call Trace: [<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40 [<ffffffff817fd87e>] xhci_address_device+0xe/0x10 [<ffffffff817d047f>] hub_port_init+0x1bf/0xb70 [<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-25 19:48:38 +07:00
hcd->address0_mutex = primary_hcd->address0_mutex;
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
hcd->bandwidth_mutex = primary_hcd->bandwidth_mutex;
hcd->primary_hcd = primary_hcd;
primary_hcd->primary_hcd = primary_hcd;
hcd->shared_hcd = primary_hcd;
primary_hcd->shared_hcd = hcd;
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
mutex_unlock(&usb_port_peer_mutex);
usb: Change usb_hcd->bandwidth_mutex to a pointer. Change the bandwith_mutex in struct usb_hcd to a pointer. This will allow the pointer to be shared across usb_hcds for the upcoming work to split the xHCI driver roothub into a USB 2.0/1.1 and a USB 3.0 bus. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-15 22:55:24 +07:00
}
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:32:52 +07:00
kref_init(&hcd->kref);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb_bus_init(&hcd->self);
hcd->self.controller = dev;
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
hcd->self.sysdev = sysdev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
hcd->self.bus_name = bus_name;
treewide: setup_timer() -> timer_setup() This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-17 04:43:17 +07:00
timer_setup(&hcd->rh_timer, rh_timer_func, 0);
USB / PM: Drop CONFIG_PM_RUNTIME from the USB core After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-30 05:47:05 +07:00
#ifdef CONFIG_PM
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 03:37:30 +07:00
INIT_WORK(&hcd->wakeup_work, hcd_resume_work);
#endif
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb/hcd: Send a uevent signaling that the host controller had died This change will send an OFFLINE event to udev with the ERROR=DEAD environment variable set when the HC dies. By notifying user space the appropriate policies can be applied. i.e., * Collect error logs. * Notify the user that USB is no longer functional. * Perform a graceful reboot. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19 22:30:22 +07:00
INIT_WORK(&hcd->died_work, hcd_died_work);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
hcd->driver = driver;
usb: Store bus type in usb_hcd, not in driver flags. The xHCI driver essentially has both a USB 2.0 and a USB 3.0 roothub. So setting the HCD_USB3 bits in the hcd->driver->flags is a bit misleading. Add a new field to usb_hcd, bcdUSB. Store the result of hcd->driver->flags & HCD_MASK in it. Later, when we have the xHCI driver register the two roothubs, we'll set the usb_hcd->bcdUSB field to HCD_USB2 for the USB 2.0 roothub, and HCD_USB3 for the USB 3.0 roothub. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-12-03 05:45:18 +07:00
hcd->speed = driver->flags & HCD_MASK;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
hcd->product_desc = (driver->product_desc) ? driver->product_desc :
"USB Host Controller";
return hcd;
}
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
EXPORT_SYMBOL_GPL(__usb_create_hcd);
/**
* usb_create_shared_hcd - create and initialize an HCD structure
* @driver: HC driver that will use this hcd
* @dev: device for this HC, stored in hcd->self.controller
* @bus_name: value to store in hcd->self.bus_name
* @primary_hcd: a pointer to the usb_hcd structure that is sharing the
* PCI device. Only allocate certain resources for the primary HCD
* Context: !in_interrupt()
*
* Allocate a struct usb_hcd, with extra space at the end for the
* HC driver's private data. Initialize the generic members of the
* hcd structure.
*
* Return: On success, a pointer to the created and initialized HCD structure.
* On failure (e.g. if memory is unavailable), %NULL.
*/
struct usb_hcd *usb_create_shared_hcd(const struct hc_driver *driver,
struct device *dev, const char *bus_name,
struct usb_hcd *primary_hcd)
{
return __usb_create_hcd(driver, dev, dev, bus_name, primary_hcd);
}
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
EXPORT_SYMBOL_GPL(usb_create_shared_hcd);
/**
* usb_create_hcd - create and initialize an HCD structure
* @driver: HC driver that will use this hcd
* @dev: device for this HC, stored in hcd->self.controller
* @bus_name: value to store in hcd->self.bus_name
* Context: !in_interrupt()
*
* Allocate a struct usb_hcd, with extra space at the end for the
* HC driver's private data. Initialize the generic members of the
* hcd structure.
*
usb: fix some scripts/kernel-doc warnings When building the htmldocs (in verbose mode), scripts/kernel-doc reports the following type of warnings: Warning(drivers/usb/core/usb.c:76): No description found for return value of 'usb_find_alt_setting' Fix them by: - adding some missing descriptions of return values - using "Return" sections for those descriptions Signed-off-by: Yacine Belkadi <yacine.belkadi.1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-08-03 01:10:04 +07:00
* Return: On success, a pointer to the created and initialized HCD
* structure. On failure (e.g. if memory is unavailable), %NULL.
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
*/
struct usb_hcd *usb_create_hcd(const struct hc_driver *driver,
struct device *dev, const char *bus_name)
{
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
return __usb_create_hcd(driver, dev, dev, bus_name, NULL);
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_create_hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
/*
* Roothubs that share one PCI device must also share the bandwidth mutex.
* Don't deallocate the bandwidth_mutex until the last shared usb_hcd is
* deallocated.
*
USB: don't free bandwidth_mutex too early The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-27 21:23:10 +07:00
* Make sure to deallocate the bandwidth_mutex only when the last HCD is
* freed. When hcd_release() is called for either hcd in a peer set,
* invalidate the peer's ->shared_hcd and ->primary_hcd pointers.
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
*/
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
static void hcd_release(struct kref *kref)
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:32:52 +07:00
{
struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref);
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
mutex_lock(&usb_port_peer_mutex);
if (hcd->shared_hcd) {
struct usb_hcd *peer = hcd->shared_hcd;
peer->shared_hcd = NULL;
USB: don't free bandwidth_mutex too early The USB core contains a bug that can show up when a USB-3 host controller is removed. If the primary (USB-2) hcd structure is released before the shared (USB-3) hcd, the core will try to do a double-free of the common bandwidth_mutex. The problem was described in graphical form by Chung-Geol Kim, who first reported it: ================================================= At *remove USB(3.0) Storage sequence <1> --> <5> ((Problem Case)) ================================================= VOLD ------------------------------------|------------ (uevent) ________|_________ |<1> | |dwc3_otg_sm_work | |usb_put_hcd | |peer_hcd(kref=2)| |__________________| ________|_________ |<2> | |New USB BUS #2 | | | |peer_hcd(kref=1) | | | --(Link)-bandXX_mutex| | |__________________| | ___________________ | |<3> | | |dwc3_otg_sm_work | | |usb_put_hcd | | |primary_hcd(kref=1)| | |___________________| | _________|_________ | |<4> | | |New USB BUS #1 | | |hcd_release | | |primary_hcd(kref=0)| | | | | |bandXX_mutex(free) |<- |___________________| (( VOLD )) ______|___________ |<5> | | SCSI | |usb_put_hcd | |peer_hcd(kref=0) | |*hcd_release | |bandXX_mutex(free*)|<- double free |__________________| ================================================= This happens because hcd_release() frees the bandwidth_mutex whenever it sees a primary hcd being released (which is not a very good idea in any case), but in the course of releasing the primary hcd, it changes the pointers in the shared hcd in such a way that the shared hcd will appear to be primary when it gets released. This patch fixes the problem by changing hcd_release() so that it deallocates the bandwidth_mutex only when the _last_ hcd structure referencing it is released. The patch also removes an unnecessary test, so that when an hcd is released, both the shared_hcd and primary_hcd pointers in the hcd's peer will be cleared. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Reported-by: Chung-Geol Kim <chunggeol.kim@samsung.com> Tested-by: Chung-Geol Kim <chunggeol.kim@samsung.com> CC: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-06-27 21:23:10 +07:00
peer->primary_hcd = NULL;
} else {
kfree(hcd->address0_mutex);
kfree(hcd->bandwidth_mutex);
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
}
mutex_unlock(&usb_port_peer_mutex);
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:32:52 +07:00
kfree(hcd);
}
struct usb_hcd *usb_get_hcd (struct usb_hcd *hcd)
{
if (hcd)
kref_get (&hcd->kref);
return hcd;
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_get_hcd);
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:32:52 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
void usb_put_hcd (struct usb_hcd *hcd)
{
usbcore: trim down usb_bus structure As part of the ongoing program to flatten out the HCD bus-glue layer, this patch (as771b) eliminates the hcpriv, release, and kref fields from struct usb_bus. hcpriv and release were not being used for anything worthwhile, and kref has been moved into the enclosing usb_hcd structure. Along with those changes, the patch gets rid of usb_bus_get and usb_bus_put, replacing them with usb_get_hcd and usb_put_hcd. The one interesting aspect is that the dev_set_drvdata call was removed from usb_put_hcd, where it clearly doesn't belong. This means the driver private data won't get reset to NULL. It shouldn't cause any problems, since the private data is undefined when no driver is bound. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-30 22:32:52 +07:00
if (hcd)
kref_put (&hcd->kref, hcd_release);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_put_hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
int usb_hcd_is_primary_hcd(struct usb_hcd *hcd)
{
if (!hcd->primary_hcd)
return 1;
return hcd == hcd->primary_hcd;
}
EXPORT_SYMBOL_GPL(usb_hcd_is_primary_hcd);
usb: add find_raw_port_number callback to struct hc_driver() xhci driver divides the root hub into two logical hubs which work respectively for usb 2.0 and usb 3.0 devices. They are independent devices in the usb core. But in the ACPI table, it's one device node and all usb2.0 and usb3.0 ports are under it. Binding usb port with its acpi node needs the raw port number which is reflected in the xhci extended capabilities table. This patch is to add find_raw_port_number callback to struct hc_driver(), fill it with xhci_find_raw_port_number() which will return raw port number and add a wrap usb_hcd_find_raw_port_number(). Otherwise, refactor xhci_find_real_port_number(). Using xhci_find_raw_port_number() to get real index in the HW port status registers instead of scanning through the xHCI roothub port array. This can help to speed up. All addresses in xhci->usb2_ports and xhci->usb3_ports array are kown good ports and don't include following bad ports in the extended capabilities talbe. (1) root port that doesn't have an entry (2) root port with unknown speed (3) root port that is listed twice and with different speeds. So xhci_find_raw_port_number() will only return port num of good ones and never touch bad ports above. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2013-03-19 15:48:12 +07:00
int usb_hcd_find_raw_port_number(struct usb_hcd *hcd, int port1)
{
if (!hcd->driver->find_raw_port_number)
return port1;
return hcd->driver->find_raw_port_number(hcd, port1);
}
usb: Refactor irq enabling out of usb_add_hcd() Refactor out the code in usb_add_hcd() to request the IRQ line for the HCD. This will only need to be called once for the two xHCI roothubs, so it's easier to refactor it into a function, rather than wrapping the long if-else block into another if statement. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-22 01:14:54 +07:00
static int usb_hcd_request_irqs(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags)
{
int retval;
if (hcd->driver->irq) {
Revert "USB/host: Cleanup unneccessary irq disable code" This reverts commit 73d4066055e0e2830533041f4b91df8e6e5976ff. Martin Steigerwald reported that this change caused a hard lockup when using USB if threadirqs are enabled. Thomas pointed out that this patch is incorrect, and can cause problems. So revert it to get the previously working functionality back. Reported-by: Martin Steigerwald <Martin@lichtvoll.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Chuansheng Liu <chuansheng.liu@intel.com> Cc: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-14 01:52:52 +07:00
usb: Refactor irq enabling out of usb_add_hcd() Refactor out the code in usb_add_hcd() to request the IRQ line for the HCD. This will only need to be called once for the two xHCI roothubs, so it's easier to refactor it into a function, rather than wrapping the long if-else block into another if statement. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-22 01:14:54 +07:00
snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d",
hcd->driver->description, hcd->self.busnum);
retval = request_irq(irqnum, &usb_hcd_irq, irqflags,
hcd->irq_descr, hcd);
if (retval != 0) {
dev_err(hcd->self.controller,
"request interrupt %d failed\n",
irqnum);
return retval;
}
hcd->irq = irqnum;
dev_info(hcd->self.controller, "irq %d, %s 0x%08llx\n", irqnum,
(hcd->driver->flags & HCD_MEMORY) ?
"io mem" : "io base",
(unsigned long long)hcd->rsrc_start);
} else {
usb: core: hcd: make hcd->irq unsigned There's really no point in having hcd->irq as a signed integer when we consider the fact that IRQ 0 means NO_IRQ. In order to avoid confusion, make hcd->irq unsigned and fix users who were passing -1 as the IRQ number to usb_add_hcd. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29 21:46:23 +07:00
hcd->irq = 0;
usb: Refactor irq enabling out of usb_add_hcd() Refactor out the code in usb_add_hcd() to request the IRQ line for the HCD. This will only need to be called once for the two xHCI roothubs, so it's easier to refactor it into a function, rather than wrapping the long if-else block into another if statement. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-22 01:14:54 +07:00
if (hcd->rsrc_start)
dev_info(hcd->self.controller, "%s 0x%08llx\n",
(hcd->driver->flags & HCD_MEMORY) ?
"io mem" : "io base",
(unsigned long long)hcd->rsrc_start);
}
return 0;
}
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
/*
* Before we free this root hub, flush in-flight peering attempts
* and disable peer lookups
*/
static void usb_put_invalidate_rhdev(struct usb_hcd *hcd)
{
struct usb_device *rhdev;
mutex_lock(&usb_port_peer_mutex);
rhdev = hcd->self.root_hub;
hcd->self.root_hub = NULL;
mutex_unlock(&usb_port_peer_mutex);
usb_put_dev(rhdev);
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/**
* usb_add_hcd - finish generic HCD structure initialization and register
* @hcd: the usb_hcd structure to initialize
* @irqnum: Interrupt line to allocate
* @irqflags: Interrupt type flags
*
* Finish the remaining parts of generic HCD initialization: allocate the
* buffers of consistent memory, register the bus, request the IRQ line,
* and call the driver's reset() and start() routines.
*/
int usb_add_hcd(struct usb_hcd *hcd,
unsigned int irqnum, unsigned long irqflags)
{
[PATCH] usbcore: register root hub in usb_add_hcd This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 22:25:17 +07:00
int retval;
struct usb_device *rhdev;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: skip phys initialization of shared hcd The phys has already been initialized when add primary hcd, including usb2 phys and usb3 phys also if exist, so needn't re-parse "phys" property again. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-22 19:12:50 +07:00
if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) {
usb: core: split usb_phy_roothub_{init,alloc} Before this patch usb_phy_roothub_init served two purposes (from a caller's point of view - like hcd.c): - parsing the PHYs and allocating the list entries - calling phy_init on each list entry While this worked so far it has one disadvantage: if we need to call phy_init for each PHY instance then the existing code cannot be re-used. Solve this by splitting off usb_phy_roothub_alloc which only parses the PHYs and allocates the list entries. usb_phy_roothub_init then gets a struct usb_phy_roothub and only calls phy_init on each PHY instance (along with the corresponding cleanup if that failed somewhere). This is a preparation step for adding proper suspend support for some hardware that requires phy_exit to be called during suspend and phy_init to be called during resume. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 02:39:47 +07:00
hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev);
USB: core: hcd: drop support for legacy phys Drop support for looking up and initialising legacy phys in USB core, something which hasn't been used by a mainline kernel since commit 9080b8dc761a ("ARM: OMAP2+: Remove legacy usb-host.c platform init code"). Specifically, since that commit usb_get_phy_dev() have always returned -ENODEV and consequently this code has not been used. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-18 16:26:20 +07:00
if (IS_ERR(hcd->phy_roothub))
return PTR_ERR(hcd->phy_roothub);
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
usb: core: split usb_phy_roothub_{init,alloc} Before this patch usb_phy_roothub_init served two purposes (from a caller's point of view - like hcd.c): - parsing the PHYs and allocating the list entries - calling phy_init on each list entry While this worked so far it has one disadvantage: if we need to call phy_init for each PHY instance then the existing code cannot be re-used. Solve this by splitting off usb_phy_roothub_alloc which only parses the PHYs and allocates the list entries. usb_phy_roothub_init then gets a struct usb_phy_roothub and only calls phy_init on each PHY instance (along with the corresponding cleanup if that failed somewhere). This is a preparation step for adding proper suspend support for some hardware that requires phy_exit to be called during suspend and phy_init to be called during resume. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 02:39:47 +07:00
retval = usb_phy_roothub_init(hcd->phy_roothub);
if (retval)
Merge 4.17-rc3 into usb-next This resolves the merge issue with drivers/usb/core/hcd.c Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-30 18:58:51 +07:00
return retval;
usb: core: split usb_phy_roothub_{init,alloc} Before this patch usb_phy_roothub_init served two purposes (from a caller's point of view - like hcd.c): - parsing the PHYs and allocating the list entries - calling phy_init on each list entry While this worked so far it has one disadvantage: if we need to call phy_init for each PHY instance then the existing code cannot be re-used. Solve this by splitting off usb_phy_roothub_alloc which only parses the PHYs and allocates the list entries. usb_phy_roothub_init then gets a struct usb_phy_roothub and only calls phy_init on each PHY instance (along with the corresponding cleanup if that failed somewhere). This is a preparation step for adding proper suspend support for some hardware that requires phy_exit to be called during suspend and phy_init to be called during resume. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Reviewed-by: Roger Quadros <rogerq@ti.com> Tested-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 02:39:47 +07:00
usb: core: comply to PHY framework Current implementation of the USB core does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-29 16:23:40 +07:00
retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
PHY_MODE_USB_HOST_SS);
usb: core: Try generic PHY_MODE_USB_HOST if usb_phy_roothub_set_mode fails Some PHYs do not support PHY_MODE_USB_HOST_SS, i.e. USB 3.0 or higher. Fall back and try the more generic PHY_MODE_USB_HOST if it fails. Fixes: b97a31348379 ("usb: core: comply to PHY framework") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-22 15:51:08 +07:00
if (retval)
retval = usb_phy_roothub_set_mode(hcd->phy_roothub,
PHY_MODE_USB_HOST);
usb: core: comply to PHY framework Current implementation of the USB core does not take into account the new PHY framework. Correct the situation by adding a call to phy_set_mode() before phy_power_on(). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-01-29 16:23:40 +07:00
if (retval)
goto err_usb_phy_roothub_power_on;
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
retval = usb_phy_roothub_power_on(hcd->phy_roothub);
if (retval)
goto err_usb_phy_roothub_power_on;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
dev_info(hcd->self.controller, "%s\n", hcd->product_desc);
usb: core: add option of only authorizing internal devices On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-17 14:21:51 +07:00
switch (authorized_default) {
case USB_AUTHORIZE_NONE:
hcd->dev_policy = USB_DEVICE_AUTHORIZE_NONE;
break;
case USB_AUTHORIZE_ALL:
hcd->dev_policy = USB_DEVICE_AUTHORIZE_ALL;
break;
case USB_AUTHORIZE_INTERNAL:
hcd->dev_policy = USB_DEVICE_AUTHORIZE_INTERNAL;
break;
case USB_AUTHORIZE_WIRED:
default:
hcd->dev_policy = hcd->wireless ?
USB_DEVICE_AUTHORIZE_NONE : USB_DEVICE_AUTHORIZE_ALL;
break;
usb: interface authorization: Use a flag for the default device authorization With this patch a flag instead of a variable is used for the default device authorization. Signed-off-by: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-26 02:10:11 +07:00
}
usb: core: add option of only authorizing internal devices On Chrome OS we want to use USBguard to potentially limit access to USB devices based on policy. We however to do not want to wait for userspace to come up before initializing fixed USB devices to not regress our boot times. This patch adds option to instruct the kernel to only authorize devices connected to the internal ports. Previously we could either authorize all or none (or, by default, we'd only authorize wired devices). The behavior is controlled via usbcore.authorized_default command line option. Signed-off-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-17 14:21:51 +07:00
[PATCH] USB: Fix USB suspend/resume crasher (#2) This patch closes the IRQ race and makes various other OHCI & EHCI code path safer vs. suspend/resume. I've been able to (finally !) successfully suspend and resume various Mac models, with or without USB mouse plugged, or plugging while asleep, or unplugging while asleep etc... all without a crash. Alan, please verify the UHCI bit I did, I only verified that it builds. It's very simple so I wouldn't expect any issue there. If you aren't confident, then just drop the hunks that change uhci-hcd.c I also made the patch a little bit more "safer" by making sure the store to the interrupt register that disables interrupts is not posted before I set the flag and drop the spinlock. Without this patch, you cannot reliably sleep/wakeup any recent Mac, and I suspect PCs have some more sneaky issues too (they don't frankly crash with machine checks because x86 tend to silently swallow PCI errors but that won't last afaik, at least PCI Express will blow up in those situations, but the USB code may still misbehave). Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-25 05:59:46 +07:00
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
usb: interface authorization: Introduces the default interface authorization Interfaces are allowed per default. This can disabled or enabled (again) by writing 0 or 1 to /sys/bus/usb/devices/usbX/interface_authorized_default Signed-off-by: Stefan Koch <stefan.koch10@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-26 02:10:06 +07:00
/* per default all interfaces are authorized */
set_bit(HCD_FLAG_INTF_AUTHORIZED, &hcd->flags);
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
/* HC is in reset state, but accessible. Now do the one-time init,
usb: hub: rename khubd to hub_wq in documentation and comments USB hub has started to use a workqueue instead of kthread. Let's update the documentation and comments here and there. This patch mostly just replaces "khubd" with "hub_wq". There are only few exceptions where the whole sentence was updated. These more complicated changes can be found in the following files: Documentation/usb/hotplug.txt drivers/net/usb/usbnet.c drivers/usb/core/hcd.c drivers/usb/host/ohci-hcd.c drivers/usb/host/xhci.c Signed-off-by: Petr Mladek <pmladek@suse.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-19 22:32:23 +07:00
* bottom up so that hcds can customize the root hubs before hub_wq
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
* starts talking to them. (Note, bus id is assigned early too.)
*/
usb: move assignment out of if condition Fix four occurrences of checkpatch.pl error: ERROR: do not use assignment in if condition The semantic patch that makes this change is: // <smpl> @@ identifier i; expression E; statement S; constant c; binary operator b; @@ + i = E; if ( - (i = E) + i b c ) S @@ identifier i, i2; expression E1, E2; constant c; @@ + if( E1->i ) { + i2 = E2; + if (i2 < c) { - if( E1->i && (i2 = E2) < c ) { ... - } + } + } // </smpl> Signed-off-by: Kris Borer <kborer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-14 20:28:30 +07:00
retval = hcd_buffer_create(hcd);
if (retval != 0) {
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
dev_dbg(hcd->self.sysdev, "pool alloc failed\n");
usb: hcd: add generic PHY support Add the generic PHY support, analogous to the USB PHY support. Intended it to be used with the PCI EHCI/OHCI drivers and the xHCI platform driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-25 02:09:44 +07:00
goto err_create_buf;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
usb: move assignment out of if condition Fix four occurrences of checkpatch.pl error: ERROR: do not use assignment in if condition The semantic patch that makes this change is: // <smpl> @@ identifier i; expression E; statement S; constant c; binary operator b; @@ + i = E; if ( - (i = E) + i b c ) S @@ identifier i, i2; expression E1, E2; constant c; @@ + if( E1->i ) { + i2 = E2; + if (i2 < c) { - if( E1->i && (i2 = E2) < c ) { ... - } + } + } // </smpl> Signed-off-by: Kris Borer <kborer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-14 20:28:30 +07:00
retval = usb_register_bus(&hcd->self);
if (retval < 0)
[PATCH] usbcore: register root hub in usb_add_hcd This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 22:25:17 +07:00
goto err_register_bus;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: hcd.c: move assignment out of if () block We should not be doing assignments within an if () block so fix up the code to not do this. change was created using Coccinelle. Acked-by: Alan Stern <stern@rowland.harvard.edu> CC: Dan Williams <dan.j.williams@intel.com> CC: Antoine Tenart <antoine.tenart@free-electrons.com> CC: Petr Mladek <pmladek@suse.cz> CC: Michal Sojka <sojka@merica.cz> CC: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> CC: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Felipe Balbi <balbi@ti.com>
2015-04-30 16:32:52 +07:00
rhdev = usb_alloc_dev(NULL, &hcd->self, 0);
if (rhdev == NULL) {
usb: separate out sysdev pointer from usb_bus For xhci-hcd platform device, all the DMA parameters are not configured properly, notably dma ops for dwc3 devices. The idea here is that you pass in the parent of_node along with the child device pointer, so it would behave exactly like the parent already does. The difference is that it also handles all the other attributes besides the mask. sysdev will represent the physical device, as seen from firmware or bus.Splitting the usb_bus->controller field into the Linux-internal device (used for the sysfs hierarchy, for printks and for power management) and a new pointer (used for DMA, DT enumeration and phy lookup) probably covers all that we really need. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sriram Dash <sriram.dash@nxp.com> Tested-by: Baolin Wang <baolin.wang@linaro.org> Tested-by: Brian Norris <briannorris@chromium.org> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Tested-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> Cc: Felipe Balbi <felipe.balbi@linux.intel.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Sinjan Kumar <sinjank@codeaurora.org> Cc: David Fisher <david.fisher1@synopsys.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: "Thang Q. Nguyen" <tqnguyen@apm.com> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jon Masters <jcm@redhat.com> Cc: Dann Frazier <dann.frazier@canonical.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Leo Li <pku.leo@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-03-13 09:18:41 +07:00
dev_err(hcd->self.sysdev, "unable to allocate root hub\n");
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
retval = -ENOMEM;
goto err_allocate_root_hub;
}
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
mutex_lock(&usb_port_peer_mutex);
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
hcd->self.root_hub = rhdev;
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
mutex_unlock(&usb_port_peer_mutex);
USB: Add SuperSpeed to the list of USB device speeds. Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed". This is 5.0 Gbps (wire speed). There are probably more places that check for speed that I've missed. SuperSpeed devices have a 512 byte endpoint 0 max packet size. This shows up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus spec). xHCI spec says that the xHC can handle intervals up to 2^15 microframes. That might change when real silicon becomes available. Add FIXME note for SuperSpeed isochronous endpoints. They can transmit up to 16 packets in one "burst" before they wait for an acknowledgment of the packets. They can do up to 3 bursts per microframe (determined by the mult value in the endpoint companion descriptor). The xHCI driver doesn't have support for isoc yet, so fix this later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:54:10 +07:00
usb: set root hub lane counts Set the the rx_lane and tx_lane count to "2" for USB 3.2 hosts. For all other older hosts set the default lane counts to 1 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 23:05:52 +07:00
rhdev->rx_lanes = 1;
rhdev->tx_lanes = 1;
usb: Store bus type in usb_hcd, not in driver flags. The xHCI driver essentially has both a USB 2.0 and a USB 3.0 roothub. So setting the HCD_USB3 bits in the hcd->driver->flags is a bit misleading. Add a new field to usb_hcd, bcdUSB. Store the result of hcd->driver->flags & HCD_MASK in it. Later, when we have the xHCI driver register the two roothubs, we'll set the usb_hcd->bcdUSB field to HCD_USB2 for the USB 2.0 roothub, and HCD_USB3 for the USB 3.0 roothub. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-12-03 05:45:18 +07:00
switch (hcd->speed) {
USB: Add SuperSpeed to the list of USB device speeds. Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed". This is 5.0 Gbps (wire speed). There are probably more places that check for speed that I've missed. SuperSpeed devices have a 512 byte endpoint 0 max packet size. This shows up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus spec). xHCI spec says that the xHC can handle intervals up to 2^15 microframes. That might change when real silicon becomes available. Add FIXME note for SuperSpeed isochronous endpoints. They can transmit up to 16 packets in one "burst" before they wait for an acknowledgment of the packets. They can do up to 3 bursts per microframe (determined by the mult value in the endpoint companion descriptor). The xHCI driver doesn't have support for isoc yet, so fix this later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:54:10 +07:00
case HCD_USB11:
rhdev->speed = USB_SPEED_FULL;
break;
case HCD_USB2:
rhdev->speed = USB_SPEED_HIGH;
break;
Allow the USB HCD to create Wireless USB root hubs This patch adds Wireless USB root hub support to the USB HCD. It allows the HWA to create its root hub which previously failed because the HCD treated wireless root hubs the same as USB2 high speed hubs. The creation of the root hub would fail in that case due to lack of TTs which wireless root hubs do not support. Signed-off-by: Thomas Pugliese <thomas.pugliese@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-01 02:16:13 +07:00
case HCD_USB25:
rhdev->speed = USB_SPEED_WIRELESS;
break;
USB: Add SuperSpeed to the list of USB device speeds. Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed". This is 5.0 Gbps (wire speed). There are probably more places that check for speed that I've missed. SuperSpeed devices have a 512 byte endpoint 0 max packet size. This shows up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus spec). xHCI spec says that the xHC can handle intervals up to 2^15 microframes. That might change when real silicon becomes available. Add FIXME note for SuperSpeed isochronous endpoints. They can transmit up to 16 packets in one "burst" before they wait for an acknowledgment of the packets. They can do up to 3 bursts per microframe (determined by the mult value in the endpoint companion descriptor). The xHCI driver doesn't have support for isoc yet, so fix this later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:54:10 +07:00
case HCD_USB3:
rhdev->speed = USB_SPEED_SUPER;
break;
usb: define HCD_USB32 speed option for hosts that support USB 3.2 dual-lane Hosts that support USB 3.2 Enhaned SuperSpeed can set their hcd speed to HCD_USB32 to let usb core and host drivers know that the controller supports new USB 3.2 dual-lane features. make sure usb core handle HCD_USB32 hosts correctly, for now similar to HCD_USB32. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 23:05:50 +07:00
case HCD_USB32:
usb: set root hub lane counts Set the the rx_lane and tx_lane count to "2" for USB 3.2 hosts. For all other older hosts set the default lane counts to 1 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-19 23:05:52 +07:00
rhdev->rx_lanes = 2;
rhdev->tx_lanes = 2;
usb: core: hcd: mark expected switch fall-through In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1468266 ("Missing break in switch") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-23 19:14:53 +07:00
/* fall through */
usb: set USB 3.1 roothub device speed to USB_SPEED_SUPER_PLUS A hcd roothub that supports HCD_USB31 is running at SuperSpeedPlus speed Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-10 14:59:26 +07:00
case HCD_USB31:
rhdev->speed = USB_SPEED_SUPER_PLUS;
break;
USB: Add SuperSpeed to the list of USB device speeds. Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed". This is 5.0 Gbps (wire speed). There are probably more places that check for speed that I've missed. SuperSpeed devices have a 512 byte endpoint 0 max packet size. This shows up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus spec). xHCI spec says that the xHC can handle intervals up to 2^15 microframes. That might change when real silicon becomes available. Add FIXME note for SuperSpeed isochronous endpoints. They can transmit up to 16 packets in one "burst" before they wait for an acknowledgment of the packets. They can do up to 3 bursts per microframe (determined by the mult value in the endpoint companion descriptor). The xHCI driver doesn't have support for isoc yet, so fix this later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:54:10 +07:00
default:
usb/hcd: don't return 0 on error in usb_add_hcd() If USB type detections fails, we run into default and return 0. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14 16:22:32 +07:00
retval = -EINVAL;
USB: fix failure path in usb_add_hcd() This patch (as1389) fixes some errors in the failure pathway of usb_add_hcd(). The actions it takes ought to be exactly the same as those taken by usb_remove_hcd(), but they aren't. In one case (removal of the usb_bus_attr_group), the two routines are brought into agreement by changing usb_remove_hcd(). All the other discrepancies are fixed by changing usb_add_hcd(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:05 +07:00
goto err_set_rh_speed;
USB: Add SuperSpeed to the list of USB device speeds. Modify the USB core to handle the new USB 3.0 speed, "SuperSpeed". This is 5.0 Gbps (wire speed). There are probably more places that check for speed that I've missed. SuperSpeed devices have a 512 byte endpoint 0 max packet size. This shows up as a bMaxPacketSize0 set to 0x09 (see table 9-8 of the USB 3.0 bus spec). xHCI spec says that the xHC can handle intervals up to 2^15 microframes. That might change when real silicon becomes available. Add FIXME note for SuperSpeed isochronous endpoints. They can transmit up to 16 packets in one "burst" before they wait for an acknowledgment of the packets. They can do up to 3 bursts per microframe (determined by the mult value in the endpoint companion descriptor). The xHCI driver doesn't have support for isoc yet, so fix this later. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-04-28 09:54:10 +07:00
}
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
[PATCH] USB: fix OHCI PM regression This fixes a small regression in USB controller power usage for many OHCI controllers, notably including every non-PCI version of OHCI: on those systems, the runtime autosuspend mechanism is no longer enabled. The change moves to saner defaults. All root hubs are expected to handle remote wakeup (and hence autosuspend), although drivers for buggy silicon may override that default. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-02 12:07:13 +07:00
/* wakeup flag init defaults to "everything works" for root hubs,
* but drivers can override it in reset() if needed, along with
* recording the overall controller's system wakeup capability.
*/
USB: Update USB default wakeup settings This patch (as1486) implements the kernel's new wakeup policy for USB host controllers. Since they don't generate wakeup requests on their but merely forward requests from their root hubs toward the CPU, they should be enabled for wakeup by default. Also, to be compliant with both the old and new policies, root hubs should not be enabled for remote wakeup by default. Userspace must enable it explicitly if it is desired. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 22:23:38 +07:00
device_set_wakeup_capable(&rhdev->dev, 1);
[PATCH] USB: fix OHCI PM regression This fixes a small regression in USB controller power usage for many OHCI controllers, notably including every non-PCI version of OHCI: on those systems, the runtime autosuspend mechanism is no longer enabled. The change moves to saner defaults. All root hubs are expected to handle remote wakeup (and hence autosuspend), although drivers for buggy silicon may override that default. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-05-02 12:07:13 +07:00
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
/* HCD_FLAG_RH_RUNNING doesn't matter until the root hub is
* registered. But since the controller can die at any time,
* let's initialize the flag before touching the hardware.
*/
set_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
/* "reset" is misnamed; its role is now one-time init. the controller
* should already have been reset (and boot firmware kicked off etc).
*/
usb: move assignment out of if condition Fix four occurrences of checkpatch.pl error: ERROR: do not use assignment in if condition The semantic patch that makes this change is: // <smpl> @@ identifier i; expression E; statement S; constant c; binary operator b; @@ + i = E; if ( - (i = E) + i b c ) S @@ identifier i, i2; expression E1, E2; constant c; @@ + if( E1->i ) { + i2 = E2; + if (i2 < c) { - if( E1->i && (i2 = E2) < c ) { ... - } + } + } // </smpl> Signed-off-by: Kris Borer <kborer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-14 20:28:30 +07:00
if (hcd->driver->reset) {
retval = hcd->driver->reset(hcd);
if (retval < 0) {
dev_err(hcd->self.controller, "can't setup: %d\n",
retval);
goto err_hcd_driver_setup;
}
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
}
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
hcd->rh_pollable = 1;
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
[PATCH] USB: remove usbcore-specific wakeup flags This makes usbcore use the driver model wakeup flags for host controllers and for their root hubs. Since previous patches have removed all users of the HCD flags they replace, this converts the last users of those flags. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 23:40:27 +07:00
/* NOTE: root hub and controller capabilities may not be the same */
if (device_can_wakeup(hcd->self.controller)
&& device_can_wakeup(&hcd->self.root_hub->dev))
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
dev_dbg(hcd->self.controller, "supports USB remote wakeup\n");
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
/* initialize tasklets */
init_giveback_urb_bh(&hcd->high_prio_bh);
init_giveback_urb_bh(&hcd->low_prio_bh);
USB: Don't fail USB3 probe on missing legacy PCI IRQ. Intel has a PCI USB xhci host controller on a new platform. It doesn't have a line IRQ definition in BIOS. The Linux driver refuses to initialize this controller, but Windows works well because it only depends on MSI. Actually, Linux also can work for MSI. This patch avoids the line IRQ checking for USB3 HCDs in usb core PCI probe. It allows the xHCI driver to try to enable MSI or MSI-X first. It will fail the probe if MSI enabling failed and there's no legacy PCI IRQ. This patch should be backported to kernels as old as 2.6.32. Signed-off-by: Alex Shi <alex.shi@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: stable@vger.kernel.org
2012-02-14 07:25:57 +07:00
/* enable irqs just before we start the controller,
* if the BIOS provides legacy PCI irqs.
*/
if (usb_hcd_is_primary_hcd(hcd) && irqnum) {
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
retval = usb_hcd_request_irqs(hcd, irqnum, irqflags);
if (retval)
goto err_request_irq;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb: Initialize hcd->state roothubs. We would like to allow host controller drivers to stop using hcd->state. Unfortunately, some host controller drivers use hcd->state as an implicit way of telling the core that a controller has died. The roothub registration functions must assume the host died if hcd->state equals HC_STATE_HALT. To facilitate drivers that don't want to set hcd->state to HC_STATE_RUNNING in their initialization routines, we set the state to running before calling the host controller's start function. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-03-12 04:46:17 +07:00
hcd->state = HC_STATE_RUNNING;
USB: Fix usb_add_hcd() checkpatch errors. The irq enabling code is going to be refactored into a new function, so clean up some checkpatch errors before moving it. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-12-02 00:22:05 +07:00
retval = hcd->driver->start(hcd);
if (retval < 0) {
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
dev_err(hcd->self.controller, "startup error %d\n", retval);
[PATCH] usbcore: register root hub in usb_add_hcd This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 22:25:17 +07:00
goto err_hcd_driver_start;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
/* starting here, usbcore will pay attention to this root hub */
usb: move assignment out of if condition Fix four occurrences of checkpatch.pl error: ERROR: do not use assignment in if condition The semantic patch that makes this change is: // <smpl> @@ identifier i; expression E; statement S; constant c; binary operator b; @@ + i = E; if ( - (i = E) + i b c ) S @@ identifier i, i2; expression E1, E2; constant c; @@ + if( E1->i ) { + i2 = E2; + if (i2 < c) { - if( E1->i && (i2 = E2) < c ) { ... - } + } + } // </smpl> Signed-off-by: Kris Borer <kborer@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-07-14 20:28:30 +07:00
retval = register_root_hub(hcd);
if (retval != 0)
[PATCH] usbcore: register root hub in usb_add_hcd This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 22:25:17 +07:00
goto err_register_root_hub;
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
if (hcd->uses_new_polling && HCD_POLL_RH(hcd))
[PATCH] usbcore support for root-hub IRQ instead of polling This is a revised version of an earlier patch to add support to usbcore for driving root hubs by interrupts rather than polling. There's a temporary flag added to struct usb_hcd, marking devices whose drivers are aware of the new mechanism. By default that flag doesn't get set so drivers will continue to see the same polling behavior as before. This way we can convert the HCDs one by one to use interrupt-based event reporting, and the temporary flag can be removed when they're all done. Also included is a small change to the hcd_disable_endpoint routine. Although endpoints normally shouldn't be disabled while a controller is suspended, it's legal to do so when the controller's driver is being rmmod'ed. Lastly the patch adds a new callback, .hub_irq_enable, for use by HCDs where the root hub's port-change interrupts are level-triggered rather than edge-triggered. The callback is invoked each time khubd has finished processing a root hub, to let the HCD know that the interrupt can safely be re-enabled. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 02:56:37 +07:00
usb_hcd_poll_rh_status(hcd);
USB: Update USB default wakeup settings This patch (as1486) implements the kernel's new wakeup policy for USB host controllers. Since they don't generate wakeup requests on their but merely forward requests from their root hubs toward the CPU, they should be enabled for wakeup by default. Also, to be compliant with both the old and new policies, root hubs should not be enabled for remote wakeup by default. Userspace must enable it explicitly if it is desired. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-09-26 22:23:38 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return retval;
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
err_register_root_hub:
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
hcd->rh_pollable = 0;
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
del_timer_sync(&hcd->rh_timer);
[PATCH] usbcore: register root hub in usb_add_hcd This patch makes usbcore automatically allocate and register the root hub device for a new host controller when the controller is registered. This way the HCDs don't all have to include the same boilerplate code. As a pleasant side benefit, the register_root_hub routine can now be made static and not EXPORTed. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-25 22:25:17 +07:00
hcd->driver->stop(hcd);
USB: fix failure path in usb_add_hcd() This patch (as1389) fixes some errors in the failure pathway of usb_add_hcd(). The actions it takes ought to be exactly the same as those taken by usb_remove_hcd(), but they aren't. In one case (removal of the usb_bus_attr_group), the two routines are brought into agreement by changing usb_remove_hcd(). All the other discrepancies are fixed by changing usb_add_hcd(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:05 +07:00
hcd->state = HC_STATE_HALT;
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
USB: fix failure path in usb_add_hcd() This patch (as1389) fixes some errors in the failure pathway of usb_add_hcd(). The actions it takes ought to be exactly the same as those taken by usb_remove_hcd(), but they aren't. In one case (removal of the usb_bus_attr_group), the two routines are brought into agreement by changing usb_remove_hcd(). All the other discrepancies are fixed by changing usb_add_hcd(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:05 +07:00
del_timer_sync(&hcd->rh_timer);
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
err_hcd_driver_start:
usb: core: hcd: make hcd->irq unsigned There's really no point in having hcd->irq as a signed integer when we consider the fact that IRQ 0 means NO_IRQ. In order to avoid confusion, make hcd->irq unsigned and fix users who were passing -1 as the IRQ number to usb_add_hcd. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29 21:46:23 +07:00
if (usb_hcd_is_primary_hcd(hcd) && hcd->irq > 0)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
free_irq(irqnum, hcd);
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
err_request_irq:
err_hcd_driver_setup:
USB: fix failure path in usb_add_hcd() This patch (as1389) fixes some errors in the failure pathway of usb_add_hcd(). The actions it takes ought to be exactly the same as those taken by usb_remove_hcd(), but they aren't. In one case (removal of the usb_bus_attr_group), the two routines are brought into agreement by changing usb_remove_hcd(). All the other discrepancies are fixed by changing usb_add_hcd(). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:05 +07:00
err_set_rh_speed:
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
usb_put_invalidate_rhdev(hcd);
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
err_allocate_root_hub:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb_deregister_bus(&hcd->self);
[PATCH] USB: usbcore sets up root hubs earlier Make the HCD initialization sequence more sane ... notably, setting up root hubs before HCDs are asked to do their one-time init. Among other things, that lets the HCDs do custom root hub init along with all the other one-time initialization done in the (now misnamed) reset() method. This also copies the controller wakeup flags into the root hub; it's done a bit later than would be ideal, but that'll be necessary until the PCI code initializes them correctly. (The PCI patch breaks on PPC due to how it sequences PCI initialization.) Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-24 06:25:40 +07:00
err_register_bus:
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
hcd_buffer_destroy(hcd);
usb: hcd: add generic PHY support Add the generic PHY support, analogous to the USB PHY support. Intended it to be used with the PCI EHCI/OHCI drivers and the xHCI platform driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-25 02:09:44 +07:00
err_create_buf:
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
usb_phy_roothub_power_off(hcd->phy_roothub);
err_usb_phy_roothub_power_on:
usb_phy_roothub_exit(hcd->phy_roothub);
USB: core: hcd: drop support for legacy phys Drop support for looking up and initialising legacy phys in USB core, something which hasn't been used by a mainline kernel since commit 9080b8dc761a ("ARM: OMAP2+: Remove legacy usb-host.c platform init code"). Specifically, since that commit usb_get_phy_dev() have always returned -ENODEV and consequently this code has not been used. Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-04-18 16:26:20 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
return retval;
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_add_hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/**
* usb_remove_hcd - shutdown processing for generic HCDs
* @hcd: the usb_hcd structure to remove
* Context: !in_interrupt()
*
* Disconnects the root hub, then reverses the effects of usb_add_hcd(),
* invoking the HCD's stop() method.
*/
void usb_remove_hcd(struct usb_hcd *hcd)
{
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
struct usb_device *rhdev = hcd->self.root_hub;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
dev_info(hcd->self.controller, "remove, state %x\n", hcd->state);
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
usb_get_dev(rhdev);
USB: move usbcore away from hcd->state The hcd->state variable is a disaster. It's not clearly owned by either usbcore or the host controller drivers, and they both change it from time to time, potentially stepping on each other's toes. It's not protected by any locks. And there's no mechanism to prevent it from going through an invalid transition. This patch (as1451) takes a first step toward fixing these problems. As it turns out, usbcore uses hcd->state for essentially only two things: checking whether the controller's root hub is running and checking whether the controller has died. Therefore the patch adds two new atomic bitflags to the hcd structure, to store these pieces of information. The new flags are used only by usbcore, and a private spinlock prevents invalid combinations (a dead controller's root hub cannot be running). The patch does not change the places where usbcore sets hcd->state, since HCDs may depend on them. Furthermore, there is one place in usb_hcd_irq() where usbcore still must use hcd->state: An HCD's interrupt handler can implicitly indicate that the controller died by setting hcd->state to HC_STATE_HALT. Nevertheless, the new code is a big improvement over the current code. The patch makes one other change. The hcd_bus_suspend() and hcd_bus_resume() routines now check first whether the host controller has died; if it has then they return immediately without calling the HCD's bus_suspend or bus_resume methods. This fixes the major problem reported in Bugzilla #29902: The system fails to suspend after a host controller dies during system resume. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Alex Terekhov <a.terekhov@gmail.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-07 23:11:52 +07:00
clear_bit(HCD_FLAG_RH_RUNNING, &hcd->flags);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
if (HC_IS_RUNNING (hcd->state))
hcd->state = HC_STATE_QUIESCING;
dev_dbg(hcd->self.controller, "roothub graceful disconnect\n");
spin_lock_irq (&hcd_root_hub_lock);
hcd->rh_registered = 0;
spin_unlock_irq (&hcd_root_hub_lock);
[PATCH] USB: Remove USB private semaphore This patch (as605) removes the private udev->serialize semaphore, relying instead on the locking provided by the embedded struct device's semaphore. The changes are confined to the core, except that the usb_trylock_device routine now uses the return convention of down_trylock rather than down_read_trylock (they return opposite values for no good reason). A couple of other associated changes are included as well: Now that we aren't concerned about HCDs that avoid using the hcd glue layer, usb_disconnect no longer needs to acquire the usb_bus_lock -- that can be done by usb_remove_hcd where it belongs. Devices aren't locked over the same scope of code in usb_new_device and hub_port_connect_change as they used to be. This shouldn't cause any trouble. Along with the preceding driver core patch, this needs a lot of testing. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-18 05:10:32 +07:00
USB / PM: Drop CONFIG_PM_RUNTIME from the USB core After commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so quite a few depend on CONFIG_PM (or even dropped in some cases). Replace CONFIG_PM_RUNTIME with CONFIG_PM in the USB core code and documentation. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-30 05:47:05 +07:00
#ifdef CONFIG_PM
USB: replace flush_workqueue with cancel_sync_work This patch (as912) replaces a couple of calls to flush_workqueue() with cancel_sync_work() and cancel_rearming_delayed_work(). Using a more directed approach allows us to avoid some nasty deadlocks. The prime example occurs when a first-level device (the parent is a root hub) is removed while at the same time the root hub gets a remote wakeup request. khubd would try to flush the autosuspend workqueue while holding the root-hub's lock, and the remote-wakeup workqueue routine would be waiting to lock the root hub. The patch also reorganizes the power management portion of usb_disconnect(), separating it out into its own routine. The autosuspend workqueue entry is cancelled immediately instead of waiting for the device's release routine. In addition, synchronization with the autosuspend thread is carried out even for root hubs (an oversight in the original code). Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <gregkh@suse.de> Cc: Mark Lord <lkml@rtr.ca> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-30 03:34:52 +07:00
cancel_work_sync(&hcd->wakeup_work);
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 03:37:30 +07:00
#endif
usb/hcd: Send a uevent signaling that the host controller had died This change will send an OFFLINE event to udev with the ERROR=DEAD environment variable set when the HC dies. By notifying user space the appropriate policies can be applied. i.e., * Collect error logs. * Notify the user that USB is no longer functional. * Perform a graceful reboot. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Raul E Rangel <rrangel@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-19 22:30:22 +07:00
cancel_work_sync(&hcd->died_work);
USB: separate autosuspend from external suspend This patch (as866) adds new entry points for external USB device suspend and resume requests, as opposed to internally-generated autosuspend or autoresume. It also changes the existing remote-wakeup code paths to use the new routines, since remote wakeup is not the same as autoresume. As part of the change, it turns out to be necessary to do remote wakeup of root hubs from a workqueue. We had been using khubd, but it does autoresume rather than an external resume. Using the ksuspend_usb_wq workqueue for this purpose seemed a logical choice. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-14 03:37:30 +07:00
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_lock(&usb_bus_idr_lock);
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
usb_disconnect(&rhdev); /* Sets rhdev to NULL */
usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock Now that usb_bus_list has been removed and switched to idr rename the related mutex accordingly. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-04 05:35:23 +07:00
mutex_unlock(&usb_bus_idr_lock);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: HCD: support giveback of URB in tasklet context This patch implements the mechanism of giveback of URB in tasklet context, so that hardware interrupt handling time for usb host controller can be saved much, and HCD interrupt handling can be simplified. Motivations: 1), on some arch(such as ARM), DMA mapping/unmapping is a bit time-consuming, for example: when accessing usb mass storage via EHCI on pandaboard, the common length of transfer buffer is 120KB, the time consumed on DMA unmapping may reach hundreds of microseconds; even on A15 based box, the time is still about scores of microseconds 2), on some arch, reading DMA coherent memoery is very time-consuming, the most common example is usb video class driver[1] 3), driver's complete() callback may do much things which is driver specific, so the time is consumed unnecessarily in hardware irq context. 4), running driver's complete() callback in hardware irq context causes that host controller driver has to release its lock in interrupt handler, so reacquiring the lock after return may busy wait a while and increase interrupt handling time. More seriously, releasing the HCD lock makes HCD becoming quite complicated to deal with introduced races. So the patch proposes to run giveback of URB in tasklet context, then time consumed in HCD irq handling doesn't depend on drivers' complete and DMA mapping/unmapping any more, also we can simplify HCD since the HCD lock isn't needed to be released during irq handling. The patch should be reasonable and doable: 1), for drivers, they don't care if the complete() is called in hard irq context or softirq context 2), the biggest change is the situation in which usb_submit_urb() is called in complete() callback, so the introduced tasklet schedule delay might be a con, but it shouldn't be a big deal: - control/bulk asynchronous transfer isn't sensitive to schedule delay - the patch schedules giveback of periodic URBs using tasklet_hi_schedule, so the introduced delay should be very small - for ISOC transfer, generally, drivers submit several URBs concurrently to avoid interrupt delay, so it is OK with the little schedule delay. - for interrupt transfer, generally, drivers only submit one URB at the same time, but interrupt transfer is often used in event report, polling, ... situations, and a little delay should be OK. Considered that HCDs may optimize on submitting URB in complete(), the patch may cause the optimization not working, so introduces one flag to mark if the HCD supports to run giveback URB in tasklet context. When all HCDs are ready, the flag can be removed. [1], http://marc.info/?t=136438111600010&r=1&w=2 Cc: Oliver Neukum <oliver@neukum.org> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-07-03 21:53:07 +07:00
/*
* tasklet_kill() isn't needed here because:
* - driver's disconnect() called from usb_disconnect() should
* make sure its URBs are completed during the disconnect()
* callback
*
* - it is too late to run complete() here since driver may have
* been removed already now
*/
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
/* Prevent any more root-hub status calls from the timer.
* The HCD might still restart the timer (if a port status change
* interrupt occurs), but usb_hcd_poll_rh_status() won't invoke
* the hub_status_data() callback.
*/
hcd->rh_pollable = 0;
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
del_timer_sync(&hcd->rh_timer);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
hcd->driver->stop(hcd);
hcd->state = HC_STATE_HALT;
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
/* In case the HCD restarted the timer, stop it again. */
USB: convert usb_hcd bitfields into atomic flags This patch (as1393) converts several of the single-bit fields in struct usb_hcd to atomic flags. This is for safety's sake; not all CPUs can update bitfield values atomically, and these flags are used in multiple contexts. The flag fields that are set only during registration or removal can remain as they are, since non-atomic accesses at those times will not cause any problems. (Strictly speaking, the authorized_default flag should become atomic as well. I didn't bother with it because it gets changed only via sysfs. It can be done later, if anyone wants.) Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-23 03:39:10 +07:00
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
USB: fix race in HCD removal This patch (as865) fixes a race in the HCD removal code discovered by Milan Plzik. Arrival of an interrupt after the root hub was unregistered could cause the root-hub status timer to start up, even after it was supposed to have been shut down. The problem is fixed by moving the del_timer_sync() call to after the HCD's stop() method, at which time IRQ generation should be disabled. Cc: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-03-13 22:10:52 +07:00
del_timer_sync(&hcd->rh_timer);
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
if (usb_hcd_is_primary_hcd(hcd)) {
usb: core: hcd: make hcd->irq unsigned There's really no point in having hcd->irq as a signed integer when we consider the fact that IRQ 0 means NO_IRQ. In order to avoid confusion, make hcd->irq unsigned and fix users who were passing -1 as the IRQ number to usb_add_hcd. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-02-29 21:46:23 +07:00
if (hcd->irq > 0)
usb: Make core allocate resources per PCI-device. Introduce the notion of a PCI device that may be associated with more than one USB host controller driver (struct usb_hcd). This patch is the start of the work to separate the xHCI host controller into two roothubs: a USB 3.0 roothub with SuperSpeed-only ports, and a USB 2.0 roothub with HS/FS/LS ports. One usb_hcd structure is designated to be the "primary HCD", and a pointer is added to the usb_hcd structure to keep track of that. A new function call, usb_hcd_is_primary_hcd() is added to check whether the USB hcd is marked as the primary HCD (or if it is not part of a roothub pair). To allow the USB core and xHCI driver to access either roothub in a pair, a "shared_hcd" pointer is added to the usb_hcd structure. Add a new function, usb_create_shared_hcd(), that does roothub allocation for paired roothubs. It will act just like usb_create_hcd() did if the primary_hcd pointer argument is NULL. If it is passed a non-NULL primary_hcd pointer, it sets usb_hcd->shared_hcd and usb_hcd->primary_hcd fields. It will also skip the bandwidth_mutex allocation, and set the secondary hcd's bandwidth_mutex pointer to the primary HCD's mutex. IRQs are only allocated once for the primary roothub. Introduce a new usb_hcd driver flag that indicates the host controller driver wants to create two roothubs. If the HCD_SHARED flag is set, then the USB core PCI probe methods will allocate a second roothub, and make sure that second roothub gets freed during rmmod and in initialization error paths. When usb_hc_died() is called with the primary HCD, make sure that any roothubs that share that host controller are also marked as being dead. Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2010-10-29 05:40:26 +07:00
free_irq(hcd->irq, hcd);
}
USB: don't stop root-hub status polls too soon This patch (as1390) fixes a problem that crops up when a UHCI host controller is unbound from uhci-hcd while there are still some active URBs. The URBs have to be unlinked when the root hub is unregistered, and uhci-hcd relies upon root-hub status polls as part of its unlinking procedure. But usb_hcd_poll_rh_status() won't make those status calls if hcd->rh_registered is clear, and the flag is cleared _before_ the unregistration takes place. Since hcd->rh_registered is used for other things and needs to be cleared early, the solution is to add a new flag (rh_pollable) and use it instead. It gets cleared _after_ the root hub is unregistered. Now that the status polls don't end too soon, we have to make sure they also don't occur too late -- after the root hub's usb_device structure or the HCD's private structures are deallocated. Therefore the patch adds usb_get_device() and usb_put_device() calls to protect the root hub structure, and it adds an extra del_timer_sync() to prevent the root-hub timer from causing an unexpected status poll. This additional complexity would not be needed if the HCD framework had provided separate stop() and release() callbacks instead of just stop(). This lack could be fixed at some future time (although it would require changes to every host controller driver); when that happens this patch won't be needed any more. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-06-10 04:34:17 +07:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
usb_deregister_bus(&hcd->self);
hcd_buffer_destroy(hcd);
usb: hcd: add generic PHY support Add the generic PHY support, analogous to the USB PHY support. Intended it to be used with the PCI EHCI/OHCI drivers and the xHCI platform driver. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-09-25 02:09:44 +07:00
usb: core: hcd: integrate the PHY wrapper into the HCD core This integrates the PHY wrapper into the core hcd infrastructure. Multiple PHYs which are part of the HCD's device tree node are now managed (= powered on/off when needed), by the new usb_phy_roothub code. Suspend and resume is also supported, however not for runtime/auto-suspend (which is triggered for example when no devices are connected to the USB bus). This is needed on some SoCs (for example Amlogic Meson GXL) because if the PHYs are disabled during auto-suspend then devices which are plugged in afterwards are not seen by the host. One example where this is required is the Amlogic GXL and GXM SoCs: They are using a dwc3 USB controller with up to three ports enabled on the internal roothub. Each port has it's own PHY which must be enabled (if one of the PHYs is left disabled then none of the USB ports works at all). The new logic works on the Amlogic GXL and GXM SoCs because the dwc3 driver internally creates a xhci-hcd which then registers a HCD which then triggers our new PHY wrapper. USB controller drivers can opt out of this by setting "skip_phy_initialization" in struct usb_hcd to true. This is identical to how it works for a single USB PHY, so the "multiple PHY" handling is disabled for drivers that opted out of the management logic of a single PHY. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Acked-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Tested-by: Yixun Lan <yixun.lan@amlogic.com> Tested-by: Neil Armstrong <narmstrong@baylibre.con> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-03-04 04:43:05 +07:00
usb_phy_roothub_power_off(hcd->phy_roothub);
usb_phy_roothub_exit(hcd->phy_roothub);
usb: assign default peer ports for root hubs Assume that the peer of a superspeed port is the port with the same id on the shared_hcd root hub. This identification scheme is required of external hubs by the USB3 spec [1]. However, for root hubs, tier mismatch may be in effect [2]. Tier mismatch can only be enumerated via platform firmware. For now, simply perform the nominal association. A new lock 'usb_port_peer_mutex' is introduced to synchronize port device add/remove with peer lookups. It protects peering against changes to hcd->shared_hcd, hcd->self.root_hub, hdev->maxchild, and port_dev->child pointers. [1]: usb 3.1 section 10.3.3 [2]: xhci 1.1 appendix D Cc: Alan Stern <stern@rowland.harvard.edu> [alan: usb_port_peer_mutex locking scheme] Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-05-21 08:08:28 +07:00
usb_put_invalidate_rhdev(hcd);
usb: hcd: initialize hcd->flags to 0 when rm hcd On some platforms(e.g. rk3399 board), we can call hcd_add/remove consecutively without calling usb_put_hcd/usb_create_hcd in between, so hcd->flags can be stale. If the HC dies due to whatever reason then without this patch we get the below error on next hcd_add. [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [173.297222] usb usb6: Product: xHCI Host Controller [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto [173.298680] hub 6-0:1.0: USB hub found [173.298749] hub 6-0:1.0: 1 port detected [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected [173.395418] hub 5-0:1.0: activate --> -19 [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 [173.603513] Hardware name: Google Kevin (DT) [173.603531] Call trace: [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 ... [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc [173.604607] [<0000000000b16000>] 0xb16000 [173.604622] handlers: [173.604648] [<ffffffc000642084>] usb_hcd_irq [173.604673] Disabling IRQ #228 Signed-off-by: William wu <wulf@rock-chips.com> Acked-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-13 10:04:22 +07:00
hcd->flags = 0;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_remove_hcd);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 07:24:08 +07:00
void
drivers: usb: core: hcd: moved asterix to variable instead of type Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:06 +07:00
usb_hcd_platform_shutdown(struct platform_device *dev)
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 07:24:08 +07:00
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
usb: core: Add PM runtime calls to usb_hcd_platform_shutdown If ohci-platform is runtime suspended, we can currently get an "imprecise external abort" on reboot with ohci-platform loaded when PM runtime is implemented for the SoC. Let's fix this by adding PM runtime support to usb_hcd_platform_shutdown. Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-03-23 04:54:05 +07:00
/* No need for pm_runtime_put(), we're shutting down */
pm_runtime_get_sync(&dev->dev);
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 07:24:08 +07:00
if (hcd->driver->shutdown)
hcd->driver->shutdown(hcd);
}
USB: mark USB drivers as being GPL only Over two years ago, the Linux USB developers stated that they believed there was no way to create a USB kernel driver that was not under the GPL. This patch moves the USB apis to enforce that decision. There are no known closed source USB drivers in the wild, so this patch should cause no problems. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-26 00:12:21 +07:00
EXPORT_SYMBOL_GPL(usb_hcd_platform_shutdown);
USB: Properly unregister reboot notifier in case of failure in ehci hcd If some problem occurs during ehci startup, for instance, request_irq fails, echi hcd driver tries it best to cleanup, but fails to unregister reboot notifier, which in turn leads to crash on reboot/poweroff. The following patch resolves this problem by not using reboot notifiers anymore, but instead making ehci/ohci driver get its own shutdown method. For PCI, it is done through pci glue, for everything else through platform driver glue. One downside: sa1111 does not use platform driver stuff, and does not have its own shutdown hook, so no 'shutdown' is called for it now. I'm not sure if it is really necessary on that platform, though. Signed-off-by: Aleks Gorelov <dared1st@yahoo.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-08-09 07:24:08 +07:00
USB: use genalloc for USB HCs with local memory For HCs that have local memory, replace the current DMA API usage with a genalloc generic allocator to manage the mappings for these devices. To help users, introduce a new HCD API, usb_hcd_setup_local_mem() that will setup up the genalloc backing up the device local memory. It will be used in subsequent patches. This is in preparation for dropping the existing "coherent" dma mem declaration APIs. The current implementation was relying on a short circuit in the DMA API that in the end, was acting as an allocator for these type of devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:40 +07:00
int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
dma_addr_t dma, size_t size)
{
int err;
void *local_mem;
usb: host: Fix excessive alignment restriction for local memory allocations The PAGE_SHIFT alignment restriction to devm_gen_pool_create() quickly exhaust local memory because most allocations are much smaller than PAGE_SIZE. This causes USB device failures such as usb 1-2.1: reset full-speed USB device number 4 using sm501-usb sd 1:0:0:0: [sda] tag#0 UNKNOWN(0x2003) Result: hostbyte=0x03 driverbyte=0x00 sd 1:0:0:0: [sda] tag#0 CDB: opcode=0x28 28 00 00 00 08 7c 00 00 f0 00 print_req_error: I/O error, dev sda, sector 2172 flags 80700 when trying to boot from the SM501 USB controller on SH4 with QEMU. Align allocations as required but not necessarily much more than that. The HCCA, TD and ED structures align with 256, 32 and 16 byte memory boundaries, as specified by the Open HCI[1]. The min_alloc_order argument to devm_gen_pool_create is now somewhat arbitrarily set to 4 (16 bytes). Perhaps it could be somewhat lower for general buffer allocations. Reference: [1] "Open Host Controller Interface Specification for USB", release 1.0a, Compaq, Microsoft, National Semiconductor, 1999, pp. 16, 19, 33. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Fredrik Noring <noring@nocrew.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 22:08:23 +07:00
hcd->localmem_pool = devm_gen_pool_create(hcd->self.sysdev, 4,
USB: use genalloc for USB HCs with local memory For HCs that have local memory, replace the current DMA API usage with a genalloc generic allocator to manage the mappings for these devices. To help users, introduce a new HCD API, usb_hcd_setup_local_mem() that will setup up the genalloc backing up the device local memory. It will be used in subsequent patches. This is in preparation for dropping the existing "coherent" dma mem declaration APIs. The current implementation was relying on a short circuit in the DMA API that in the end, was acting as an allocator for these type of devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:40 +07:00
dev_to_node(hcd->self.sysdev),
dev_name(hcd->self.sysdev));
if (IS_ERR(hcd->localmem_pool))
return PTR_ERR(hcd->localmem_pool);
local_mem = devm_memremap(hcd->self.sysdev, phys_addr,
size, MEMREMAP_WC);
usb/hcd: Fix a NULL vs IS_ERR() bug in usb_hcd_setup_local_mem() The devm_memremap() function doesn't return NULL, it returns error pointers. Fixes: b0310c2f09bb ("USB: use genalloc for USB HCs with local memory") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20190607135709.GC16718@mwanda Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-07 20:57:09 +07:00
if (IS_ERR(local_mem))
return PTR_ERR(local_mem);
USB: use genalloc for USB HCs with local memory For HCs that have local memory, replace the current DMA API usage with a genalloc generic allocator to manage the mappings for these devices. To help users, introduce a new HCD API, usb_hcd_setup_local_mem() that will setup up the genalloc backing up the device local memory. It will be used in subsequent patches. This is in preparation for dropping the existing "coherent" dma mem declaration APIs. The current implementation was relying on a short circuit in the DMA API that in the end, was acting as an allocator for these type of devices. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Tested-by: Fredrik Noring <noring@nocrew.org> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-05-29 17:28:40 +07:00
/*
* Here we pass a dma_addr_t but the arg type is a phys_addr_t.
* It's not backed by system memory and thus there's no kernel mapping
* for it.
*/
err = gen_pool_add_virt(hcd->localmem_pool, (unsigned long)local_mem,
dma, size, dev_to_node(hcd->self.sysdev));
if (err < 0) {
dev_err(hcd->self.sysdev, "gen_pool_add_virt failed with %d\n",
err);
return err;
}
return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_setup_local_mem);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*-------------------------------------------------------------------------*/
usb: core: use IS_ENABLED() instead of checking for built-in or module The IS_ENABLED() macro checks if a Kconfig symbol has been enabled either built-in or as a module, use that macro instead of open coding the same. Using the macro makes the code more readable by helping abstract away some of the Kconfig built-in and module enable details. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-08-18 20:45:04 +07:00
#if IS_ENABLED(CONFIG_USB_MON)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
USB: constify usb_mon_operations structure The usb_mon_operations structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-28 22:07:10 +07:00
const struct usb_mon_operations *mon_ops;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
/*
* The registration is unlocked.
* We do it this way because we do not want to lock in hot paths.
*
* Notice that the code is minimally error-proof. Because usbmon needs
* symbols from usbcore, usbcore gets referenced and cannot be unloaded first.
*/
drivers: usb: core: hcd: Whitespace fixes including - spaces to tabs - removing spaces before array indexing (foo [] to foo[]) - adding spaces around unary operator (foo? 1 : 0 to foo ? 1 : 0) - removed trailing whitespace Signed-off-by: Matthias Beyer <mail@beyermatthias.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-05 23:02:07 +07:00
USB: constify usb_mon_operations structure The usb_mon_operations structure is never modified, so declare it as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-28 22:07:10 +07:00
int usb_mon_register(const struct usb_mon_operations *ops)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 05:20:36 +07:00
{
if (mon_ops)
return -EBUSY;
mon_ops = ops;
mb();
return 0;
}
EXPORT_SYMBOL_GPL (usb_mon_register);
void usb_mon_deregister (void)
{
if (mon_ops == NULL) {
printk(KERN_ERR "USB: monitor was not registered\n");
return;
}
mon_ops = NULL;
mb();
}
EXPORT_SYMBOL_GPL (usb_mon_deregister);
USB: Allow usbmon as a module even if usbcore is builtin usbmon can only be built as a module if usbcore is a module too. Trivial changes to the relevant Kconfig and Makefile (and a few trivial changes elsewhere) allow usbmon to be built as a module even if usbcore is builtin. This is verified to work in all 9 permutations (3 correctly prohibited by Kconfig, 6 build a suitable result). Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-11-14 11:31:21 +07:00
#endif /* CONFIG_USB_MON || CONFIG_USB_MON_MODULE */
Reference in New Issue Copy Permalink