linux_dsm_epyc7002/drivers/media/dvb-frontends/rtl2830.c

939 lines
21 KiB
C
Raw Normal View History

/*
* Realtek RTL2830 DVB-T demodulator driver
*
* Copyright (C) 2011 Antti Palosaari <crope@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include "rtl2830_priv.h"
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 15:11:47 +07:00
/* Max transfer size done by I2C transfer functions */
#define MAX_XFER_SIZE 64
/* write multiple hardware registers */
static int rtl2830_wr(struct i2c_client *client, u8 reg, const u8 *val, int len)
{
int ret;
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 15:11:47 +07:00
u8 buf[MAX_XFER_SIZE];
struct i2c_msg msg[1] = {
{
.addr = client->addr,
.flags = 0,
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 15:11:47 +07:00
.len = 1 + len,
.buf = buf,
}
};
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 15:11:47 +07:00
if (1 + len > sizeof(buf)) {
dev_warn(&client->dev, "i2c wr reg=%04x: len=%d is too big!\n",
reg, len);
[media] dvb-frontends: Don't use dynamic static allocation Dynamic static allocation is evil, as Kernel stack is too low, and compilation complains about it on some archs: drivers/media/dvb-frontends/af9013.c:77:1: warning: 'af9013_wr_regs_i2c' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:188:1: warning: 'af9033_wr_reg_val_tab' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/af9033.c:68:1: warning: 'af9033_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/bcm3510.c:230:1: warning: 'bcm3510_do_hab_cmd' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/cxd2820r_core.c:84:1: warning: 'cxd2820r_rd_regs_i2c.isra.1' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2830.c:56:1: warning: 'rtl2830_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/rtl2832.c:187:1: warning: 'rtl2832_wr' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:52:1: warning: 'tda10071_wr_regs' uses dynamic stack allocation [enabled by default] drivers/media/dvb-frontends/tda10071.c:84:1: warning: 'tda10071_rd_regs' uses dynamic stack allocation [enabled by default] Instead, let's enforce a limit for the buffer. Considering that I2C transfers are generally limited, and that devices used on USB has a max data length of 64 bytes for the control URBs. So, it seem safe to use 64 bytes as the hard limit for all those devices. On most cases, the limit is a way lower than that, but this limit is small enough to not affect the Kernel stack, and it is a no brain limit, as using smaller ones would require to either carefully each driver or to take a look on each datasheet. Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-11-02 15:11:47 +07:00
return -EINVAL;
}
buf[0] = reg;
memcpy(&buf[1], val, len);
ret = i2c_transfer(client->adapter, msg, 1);
if (ret == 1) {
ret = 0;
} else {
dev_warn(&client->dev, "i2c wr failed=%d reg=%02x len=%d\n",
ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* read multiple hardware registers */
static int rtl2830_rd(struct i2c_client *client, u8 reg, u8 *val, int len)
{
int ret;
struct i2c_msg msg[2] = {
{
.addr = client->addr,
.flags = 0,
.len = 1,
.buf = &reg,
}, {
.addr = client->addr,
.flags = I2C_M_RD,
.len = len,
.buf = val,
}
};
ret = i2c_transfer(client->adapter, msg, 2);
if (ret == 2) {
ret = 0;
} else {
dev_warn(&client->dev, "i2c rd failed=%d reg=%02x len=%d\n",
ret, reg, len);
ret = -EREMOTEIO;
}
return ret;
}
/* write multiple registers */
static int rtl2830_wr_regs(struct i2c_client *client, u16 reg, const u8 *val, int len)
{
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
u8 reg2 = (reg >> 0) & 0xff;
u8 page = (reg >> 8) & 0xff;
/* switch bank if needed */
if (page != dev->page) {
ret = rtl2830_wr(client, 0x00, &page, 1);
if (ret)
return ret;
dev->page = page;
}
return rtl2830_wr(client, reg2, val, len);
}
/* read multiple registers */
static int rtl2830_rd_regs(struct i2c_client *client, u16 reg, u8 *val, int len)
{
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
u8 reg2 = (reg >> 0) & 0xff;
u8 page = (reg >> 8) & 0xff;
/* switch bank if needed */
if (page != dev->page) {
ret = rtl2830_wr(client, 0x00, &page, 1);
if (ret)
return ret;
dev->page = page;
}
return rtl2830_rd(client, reg2, val, len);
}
/* read single register */
static int rtl2830_rd_reg(struct i2c_client *client, u16 reg, u8 *val)
{
return rtl2830_rd_regs(client, reg, val, 1);
}
/* write single register with mask */
static int rtl2830_wr_reg_mask(struct i2c_client *client, u16 reg, u8 val, u8 mask)
{
int ret;
u8 tmp;
/* no need for read if whole reg is written */
if (mask != 0xff) {
ret = rtl2830_rd_regs(client, reg, &tmp, 1);
if (ret)
return ret;
val &= mask;
tmp &= ~mask;
val |= tmp;
}
return rtl2830_wr_regs(client, reg, &val, 1);
}
/* read single register with mask */
static int rtl2830_rd_reg_mask(struct i2c_client *client, u16 reg, u8 *val, u8 mask)
{
int ret, i;
u8 tmp;
ret = rtl2830_rd_regs(client, reg, &tmp, 1);
if (ret)
return ret;
tmp &= mask;
/* find position of the first bit */
for (i = 0; i < 8; i++) {
if ((mask >> i) & 0x01)
break;
}
*val = tmp >> i;
return 0;
}
static int rtl2830_init(struct dvb_frontend *fe)
{
struct i2c_client *client = fe->demodulator_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
int ret, i;
struct rtl2830_reg_val_mask tab[] = {
{0x00d, 0x01, 0x03},
{0x00d, 0x10, 0x10},
{0x104, 0x00, 0x1e},
{0x105, 0x80, 0x80},
{0x110, 0x02, 0x03},
{0x110, 0x08, 0x0c},
{0x17b, 0x00, 0x40},
{0x17d, 0x05, 0x0f},
{0x17d, 0x50, 0xf0},
{0x18c, 0x08, 0x0f},
{0x18d, 0x00, 0xc0},
{0x188, 0x05, 0x0f},
{0x189, 0x00, 0xfc},
{0x2d5, 0x02, 0x02},
{0x2f1, 0x02, 0x06},
{0x2f1, 0x20, 0xf8},
{0x16d, 0x00, 0x01},
{0x1a6, 0x00, 0x80},
{0x106, dev->pdata->vtop, 0x3f},
{0x107, dev->pdata->krf, 0x3f},
{0x112, 0x28, 0xff},
{0x103, dev->pdata->agc_targ_val, 0xff},
{0x00a, 0x02, 0x07},
{0x140, 0x0c, 0x3c},
{0x140, 0x40, 0xc0},
{0x15b, 0x05, 0x07},
{0x15b, 0x28, 0x38},
{0x15c, 0x05, 0x07},
{0x15c, 0x28, 0x38},
{0x115, dev->pdata->spec_inv, 0x01},
{0x16f, 0x01, 0x07},
{0x170, 0x18, 0x38},
{0x172, 0x0f, 0x0f},
{0x173, 0x08, 0x38},
{0x175, 0x01, 0x07},
{0x176, 0x00, 0xc0},
};
for (i = 0; i < ARRAY_SIZE(tab); i++) {
ret = rtl2830_wr_reg_mask(client, tab[i].reg, tab[i].val,
tab[i].mask);
if (ret)
goto err;
}
ret = rtl2830_wr_regs(client, 0x18f, "\x28\x00", 2);
if (ret)
goto err;
ret = rtl2830_wr_regs(client, 0x195,
"\x04\x06\x0a\x12\x0a\x12\x1e\x28", 8);
if (ret)
goto err;
/* TODO: spec init */
/* soft reset */
ret = rtl2830_wr_reg_mask(client, 0x101, 0x04, 0x04);
if (ret)
goto err;
ret = rtl2830_wr_reg_mask(client, 0x101, 0x00, 0x04);
if (ret)
goto err;
/* init stats here in order signal app which stats are supported */
c->strength.len = 1;
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
c->cnr.len = 1;
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
c->post_bit_error.len = 1;
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
c->post_bit_count.len = 1;
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
/* start statistics polling */
schedule_delayed_work(&dev->stat_work, msecs_to_jiffies(2000));
dev->sleeping = false;
return ret;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int rtl2830_sleep(struct dvb_frontend *fe)
{
struct i2c_client *client = fe->demodulator_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
dev->sleeping = true;
/* stop statistics polling */
cancel_delayed_work_sync(&dev->stat_work);
dev->fe_status = 0;
return 0;
}
static int rtl2830_get_tune_settings(struct dvb_frontend *fe,
struct dvb_frontend_tune_settings *s)
{
s->min_delay_ms = 500;
s->step_size = fe->ops.info.frequency_stepsize * 2;
s->max_drift = (fe->ops.info.frequency_stepsize * 2) + 1;
return 0;
}
static int rtl2830_set_frontend(struct dvb_frontend *fe)
{
struct i2c_client *client = fe->demodulator_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret, i;
u64 num;
u8 buf[3], tmp;
u32 if_ctl, if_frequency;
static const u8 bw_params1[3][34] = {
{
0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41,
0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a,
0x1f, 0x47, 0x1f, 0x7c, 0x00, 0x30, 0x01, 0x4b, 0x02, 0x82,
0x03, 0x73, 0x03, 0xcf, /* 6 MHz */
}, {
0x1f, 0xfa, 0x1f, 0xda, 0x1f, 0xc1, 0x1f, 0xb3, 0x1f, 0xca,
0x00, 0x07, 0x00, 0x4d, 0x00, 0x6d, 0x00, 0x40, 0x1f, 0xca,
0x1f, 0x4d, 0x1f, 0x2a, 0x1f, 0xb2, 0x00, 0xec, 0x02, 0x7e,
0x03, 0xd0, 0x04, 0x53, /* 7 MHz */
}, {
0x00, 0x10, 0x00, 0x0e, 0x1f, 0xf7, 0x1f, 0xc9, 0x1f, 0xa0,
0x1f, 0xa6, 0x1f, 0xec, 0x00, 0x4e, 0x00, 0x7d, 0x00, 0x3a,
0x1f, 0x98, 0x1f, 0x10, 0x1f, 0x40, 0x00, 0x75, 0x02, 0x5f,
0x04, 0x24, 0x04, 0xdb, /* 8 MHz */
},
};
static const u8 bw_params2[3][6] = {
{0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30}, /* 6 MHz */
{0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98}, /* 7 MHz */
{0xae, 0xba, 0xf3, 0x26, 0x66, 0x64}, /* 8 MHz */
};
dev_dbg(&client->dev, "frequency=%u bandwidth_hz=%u inversion=%u\n",
c->frequency, c->bandwidth_hz, c->inversion);
/* program tuner */
if (fe->ops.tuner_ops.set_params)
fe->ops.tuner_ops.set_params(fe);
switch (c->bandwidth_hz) {
case 6000000:
i = 0;
break;
case 7000000:
i = 1;
break;
case 8000000:
i = 2;
break;
default:
dev_err(&client->dev, "invalid bandwidth_hz %u\n",
c->bandwidth_hz);
return -EINVAL;
}
ret = rtl2830_wr_reg_mask(client, 0x008, i << 1, 0x06);
if (ret)
goto err;
/* program if frequency */
if (fe->ops.tuner_ops.get_if_frequency)
ret = fe->ops.tuner_ops.get_if_frequency(fe, &if_frequency);
else
ret = -EINVAL;
if (ret)
goto err;
num = if_frequency % dev->pdata->clk;
num *= 0x400000;
num = div_u64(num, dev->pdata->clk);
num = -num;
if_ctl = num & 0x3fffff;
dev_dbg(&client->dev, "if_frequency=%d if_ctl=%08x\n",
if_frequency, if_ctl);
ret = rtl2830_rd_reg_mask(client, 0x119, &tmp, 0xc0); /* b[7:6] */
if (ret)
goto err;
buf[0] = tmp << 6;
buf[0] |= (if_ctl >> 16) & 0x3f;
buf[1] = (if_ctl >> 8) & 0xff;
buf[2] = (if_ctl >> 0) & 0xff;
ret = rtl2830_wr_regs(client, 0x119, buf, 3);
if (ret)
goto err;
/* 1/2 split I2C write */
ret = rtl2830_wr_regs(client, 0x11c, &bw_params1[i][0], 17);
if (ret)
goto err;
/* 2/2 split I2C write */
ret = rtl2830_wr_regs(client, 0x12d, &bw_params1[i][17], 17);
if (ret)
goto err;
ret = rtl2830_wr_regs(client, 0x19d, bw_params2[i], 6);
if (ret)
goto err;
return ret;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int rtl2830_get_frontend(struct dvb_frontend *fe)
{
struct i2c_client *client = fe->demodulator_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
int ret;
u8 buf[3];
if (dev->sleeping)
return 0;
ret = rtl2830_rd_regs(client, 0x33c, buf, 2);
if (ret)
goto err;
ret = rtl2830_rd_reg(client, 0x351, &buf[2]);
if (ret)
goto err;
dev_dbg(&client->dev, "TPS=%*ph\n", 3, buf);
switch ((buf[0] >> 2) & 3) {
case 0:
c->modulation = QPSK;
break;
case 1:
c->modulation = QAM_16;
break;
case 2:
c->modulation = QAM_64;
break;
}
switch ((buf[2] >> 2) & 1) {
case 0:
c->transmission_mode = TRANSMISSION_MODE_2K;
break;
case 1:
c->transmission_mode = TRANSMISSION_MODE_8K;
}
switch ((buf[2] >> 0) & 3) {
case 0:
c->guard_interval = GUARD_INTERVAL_1_32;
break;
case 1:
c->guard_interval = GUARD_INTERVAL_1_16;
break;
case 2:
c->guard_interval = GUARD_INTERVAL_1_8;
break;
case 3:
c->guard_interval = GUARD_INTERVAL_1_4;
break;
}
switch ((buf[0] >> 4) & 7) {
case 0:
c->hierarchy = HIERARCHY_NONE;
break;
case 1:
c->hierarchy = HIERARCHY_1;
break;
case 2:
c->hierarchy = HIERARCHY_2;
break;
case 3:
c->hierarchy = HIERARCHY_4;
break;
}
switch ((buf[1] >> 3) & 7) {
case 0:
c->code_rate_HP = FEC_1_2;
break;
case 1:
c->code_rate_HP = FEC_2_3;
break;
case 2:
c->code_rate_HP = FEC_3_4;
break;
case 3:
c->code_rate_HP = FEC_5_6;
break;
case 4:
c->code_rate_HP = FEC_7_8;
break;
}
switch ((buf[1] >> 0) & 7) {
case 0:
c->code_rate_LP = FEC_1_2;
break;
case 1:
c->code_rate_LP = FEC_2_3;
break;
case 2:
c->code_rate_LP = FEC_3_4;
break;
case 3:
c->code_rate_LP = FEC_5_6;
break;
case 4:
c->code_rate_LP = FEC_7_8;
break;
}
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int rtl2830_read_status(struct dvb_frontend *fe, fe_status_t *status)
{
struct i2c_client *client = fe->demodulator_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
u8 tmp;
*status = 0;
if (dev->sleeping)
return 0;
ret = rtl2830_rd_reg_mask(client, 0x351, &tmp, 0x78); /* [6:3] */
if (ret)
goto err;
if (tmp == 11) {
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK;
} else if (tmp == 10) {
*status |= FE_HAS_SIGNAL | FE_HAS_CARRIER |
FE_HAS_VITERBI;
}
dev->fe_status = *status;
return ret;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int rtl2830_read_snr(struct dvb_frontend *fe, u16 *snr)
{
struct i2c_client *client = fe->demodulator_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret, hierarchy, constellation;
u8 buf[2], tmp;
u16 tmp16;
#define CONSTELLATION_NUM 3
#define HIERARCHY_NUM 4
static const u32 snr_constant[CONSTELLATION_NUM][HIERARCHY_NUM] = {
{70705899, 70705899, 70705899, 70705899},
{82433173, 82433173, 87483115, 94445660},
{92888734, 92888734, 95487525, 99770748},
};
if (dev->sleeping)
return 0;
/* reports SNR in resolution of 0.1 dB */
ret = rtl2830_rd_reg(client, 0x33c, &tmp);
if (ret)
goto err;
constellation = (tmp >> 2) & 0x03; /* [3:2] */
if (constellation > CONSTELLATION_NUM - 1)
goto err;
hierarchy = (tmp >> 4) & 0x07; /* [6:4] */
if (hierarchy > HIERARCHY_NUM - 1)
goto err;
ret = rtl2830_rd_regs(client, 0x40c, buf, 2);
if (ret)
goto err;
tmp16 = buf[0] << 8 | buf[1];
if (tmp16)
*snr = (snr_constant[constellation][hierarchy] -
intlog10(tmp16)) / ((1 << 24) / 100);
else
*snr = 0;
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int rtl2830_read_ber(struct dvb_frontend *fe, u32 *ber)
{
struct i2c_client *client = fe->demodulator_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
int ret;
u8 buf[2];
if (dev->sleeping)
return 0;
ret = rtl2830_rd_regs(client, 0x34e, buf, 2);
if (ret)
goto err;
*ber = buf[0] << 8 | buf[1];
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int rtl2830_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
{
*ucblocks = 0;
return 0;
}
static int rtl2830_read_signal_strength(struct dvb_frontend *fe, u16 *strength)
{
struct dtv_frontend_properties *c = &fe->dtv_property_cache;
if (c->strength.stat[0].scale == FE_SCALE_RELATIVE)
*strength = c->strength.stat[0].uvalue;
else
*strength = 0;
return 0;
}
static struct dvb_frontend_ops rtl2830_ops = {
.delsys = {SYS_DVBT},
.info = {
.name = "Realtek RTL2830 (DVB-T)",
.caps = FE_CAN_FEC_1_2 |
FE_CAN_FEC_2_3 |
FE_CAN_FEC_3_4 |
FE_CAN_FEC_5_6 |
FE_CAN_FEC_7_8 |
FE_CAN_FEC_AUTO |
FE_CAN_QPSK |
FE_CAN_QAM_16 |
FE_CAN_QAM_64 |
FE_CAN_QAM_AUTO |
FE_CAN_TRANSMISSION_MODE_AUTO |
FE_CAN_GUARD_INTERVAL_AUTO |
FE_CAN_HIERARCHY_AUTO |
FE_CAN_RECOVER |
FE_CAN_MUTE_TS
},
.init = rtl2830_init,
.sleep = rtl2830_sleep,
.get_tune_settings = rtl2830_get_tune_settings,
.set_frontend = rtl2830_set_frontend,
.get_frontend = rtl2830_get_frontend,
.read_status = rtl2830_read_status,
.read_snr = rtl2830_read_snr,
.read_ber = rtl2830_read_ber,
.read_ucblocks = rtl2830_read_ucblocks,
.read_signal_strength = rtl2830_read_signal_strength,
};
static void rtl2830_stat_work(struct work_struct *work)
{
struct rtl2830_dev *dev = container_of(work, struct rtl2830_dev, stat_work.work);
struct i2c_client *client = dev->client;
struct dtv_frontend_properties *c = &dev->fe.dtv_property_cache;
int ret, tmp;
u8 u8tmp, buf[2];
u16 u16tmp;
dev_dbg(&client->dev, "\n");
/* signal strength */
if (dev->fe_status & FE_HAS_SIGNAL) {
struct {signed int x:14; } s;
/* read IF AGC */
ret = rtl2830_rd_regs(client, 0x359, buf, 2);
if (ret)
goto err;
u16tmp = buf[0] << 8 | buf[1] << 0;
u16tmp &= 0x3fff; /* [13:0] */
tmp = s.x = u16tmp; /* 14-bit bin to 2 complement */
u16tmp = clamp_val(-4 * tmp + 32767, 0x0000, 0xffff);
dev_dbg(&client->dev, "IF AGC=%d\n", tmp);
c->strength.stat[0].scale = FE_SCALE_RELATIVE;
c->strength.stat[0].uvalue = u16tmp;
} else {
c->strength.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
/* CNR */
if (dev->fe_status & FE_HAS_VITERBI) {
unsigned hierarchy, constellation;
#define CONSTELLATION_NUM 3
#define HIERARCHY_NUM 4
static const u32 constant[CONSTELLATION_NUM][HIERARCHY_NUM] = {
{70705899, 70705899, 70705899, 70705899},
{82433173, 82433173, 87483115, 94445660},
{92888734, 92888734, 95487525, 99770748},
};
ret = rtl2830_rd_reg(client, 0x33c, &u8tmp);
if (ret)
goto err;
constellation = (u8tmp >> 2) & 0x03; /* [3:2] */
if (constellation > CONSTELLATION_NUM - 1)
goto err_schedule_delayed_work;
hierarchy = (u8tmp >> 4) & 0x07; /* [6:4] */
if (hierarchy > HIERARCHY_NUM - 1)
goto err_schedule_delayed_work;
ret = rtl2830_rd_regs(client, 0x40c, buf, 2);
if (ret)
goto err;
u16tmp = buf[0] << 8 | buf[1] << 0;
if (u16tmp)
tmp = (constant[constellation][hierarchy] -
intlog10(u16tmp)) / ((1 << 24) / 10000);
else
tmp = 0;
dev_dbg(&client->dev, "CNR raw=%u\n", u16tmp);
c->cnr.stat[0].scale = FE_SCALE_DECIBEL;
c->cnr.stat[0].svalue = tmp;
} else {
c->cnr.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
/* BER */
if (dev->fe_status & FE_HAS_LOCK) {
ret = rtl2830_rd_regs(client, 0x34e, buf, 2);
if (ret)
goto err;
u16tmp = buf[0] << 8 | buf[1] << 0;
dev->post_bit_error += u16tmp;
dev->post_bit_count += 1000000;
dev_dbg(&client->dev, "BER errors=%u total=1000000\n", u16tmp);
c->post_bit_error.stat[0].scale = FE_SCALE_COUNTER;
c->post_bit_error.stat[0].uvalue = dev->post_bit_error;
c->post_bit_count.stat[0].scale = FE_SCALE_COUNTER;
c->post_bit_count.stat[0].uvalue = dev->post_bit_count;
} else {
c->post_bit_error.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
c->post_bit_count.stat[0].scale = FE_SCALE_NOT_AVAILABLE;
}
err_schedule_delayed_work:
schedule_delayed_work(&dev->stat_work, msecs_to_jiffies(2000));
return;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
}
/*
* I2C gate/repeater logic
* We must use unlocked i2c_transfer() here because I2C lock is already taken
* by tuner driver. Gate is closed automatically after single I2C xfer.
*/
static int rtl2830_select(struct i2c_adapter *adap, void *mux_priv, u32 chan_id)
{
struct i2c_client *client = mux_priv;
struct rtl2830_dev *dev = i2c_get_clientdata(client);
struct i2c_msg select_reg_page_msg[1] = {
{
.addr = client->addr,
.flags = 0,
.len = 2,
.buf = "\x00\x01",
}
};
struct i2c_msg gate_open_msg[1] = {
{
.addr = client->addr,
.flags = 0,
.len = 2,
.buf = "\x01\x08",
}
};
int ret;
/* select register page */
ret = __i2c_transfer(client->adapter, select_reg_page_msg, 1);
if (ret != 1) {
dev_warn(&client->dev, "i2c write failed %d\n", ret);
if (ret >= 0)
ret = -EREMOTEIO;
goto err;
}
dev->page = 1;
/* open tuner I2C repeater for 1 xfer, closes automatically */
ret = __i2c_transfer(client->adapter, gate_open_msg, 1);
if (ret != 1) {
dev_warn(&client->dev, "i2c write failed %d\n", ret);
if (ret >= 0)
ret = -EREMOTEIO;
goto err;
}
return 0;
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static struct dvb_frontend *rtl2830_get_dvb_frontend(struct i2c_client *client)
{
struct rtl2830_dev *dev = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
return &dev->fe;
}
static struct i2c_adapter *rtl2830_get_i2c_adapter(struct i2c_client *client)
{
struct rtl2830_dev *dev = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
return dev->adapter;
}
static int rtl2830_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct rtl2830_platform_data *pdata = client->dev.platform_data;
struct rtl2830_dev *dev;
int ret;
u8 u8tmp;
dev_dbg(&client->dev, "\n");
if (pdata == NULL) {
ret = -EINVAL;
goto err;
}
/* allocate memory for the internal state */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (dev == NULL) {
ret = -ENOMEM;
goto err;
}
/* setup the state */
i2c_set_clientdata(client, dev);
dev->client = client;
dev->pdata = client->dev.platform_data;
dev->sleeping = true;
INIT_DELAYED_WORK(&dev->stat_work, rtl2830_stat_work);
/* check if the demod is there */
ret = rtl2830_rd_reg(client, 0x000, &u8tmp);
if (ret)
goto err_kfree;
/* create muxed i2c adapter for tuner */
dev->adapter = i2c_add_mux_adapter(client->adapter, &client->dev,
client, 0, 0, 0, rtl2830_select, NULL);
if (dev->adapter == NULL) {
ret = -ENODEV;
goto err_kfree;
}
/* create dvb frontend */
memcpy(&dev->fe.ops, &rtl2830_ops, sizeof(dev->fe.ops));
dev->fe.demodulator_priv = client;
/* setup callbacks */
pdata->get_dvb_frontend = rtl2830_get_dvb_frontend;
pdata->get_i2c_adapter = rtl2830_get_i2c_adapter;
dev_info(&client->dev, "Realtek RTL2830 successfully attached\n");
return 0;
err_kfree:
kfree(dev);
err:
dev_dbg(&client->dev, "failed=%d\n", ret);
return ret;
}
static int rtl2830_remove(struct i2c_client *client)
{
struct rtl2830_dev *dev = i2c_get_clientdata(client);
dev_dbg(&client->dev, "\n");
i2c_del_mux_adapter(dev->adapter);
kfree(dev);
return 0;
}
static const struct i2c_device_id rtl2830_id_table[] = {
{"rtl2830", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, rtl2830_id_table);
static struct i2c_driver rtl2830_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "rtl2830",
},
.probe = rtl2830_probe,
.remove = rtl2830_remove,
.id_table = rtl2830_id_table,
};
module_i2c_driver(rtl2830_driver);
MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
MODULE_DESCRIPTION("Realtek RTL2830 DVB-T demodulator driver");
MODULE_LICENSE("GPL");