linux_dsm_epyc7002/drivers/gpu/drm/i915/intel_guc_fw.c

/*
 * Copyright © 2014 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 *
 * Authors:
 *    Vinit Azad <vinit.azad@intel.com>
 *    Ben Widawsky <ben@bwidawsk.net>
 *    Dave Gordon <david.s.gordon@intel.com>
 *    Alex Dai <yu.dai@intel.com>
 */

#include "intel_guc_fw.h"
#include "i915_drv.h"

#define SKL_FW_MAJOR 9
#define SKL_FW_MINOR 33

#define BXT_FW_MAJOR 9
#define BXT_FW_MINOR 29

#define KBL_FW_MAJOR 9
#define KBL_FW_MINOR 14

#define GLK_FW_MAJOR 10
#define GLK_FW_MINOR 56

#define GUC_FW_PATH(platform, major, minor) \
       "i915/" __stringify(platform) "_guc_ver" __stringify(major) "_" __stringify(minor) ".bin"

#define I915_SKL_GUC_UCODE GUC_FW_PATH(skl, SKL_FW_MAJOR, SKL_FW_MINOR)
MODULE_FIRMWARE(I915_SKL_GUC_UCODE);

#define I915_BXT_GUC_UCODE GUC_FW_PATH(bxt, BXT_FW_MAJOR, BXT_FW_MINOR)
MODULE_FIRMWARE(I915_BXT_GUC_UCODE);

#define I915_KBL_GUC_UCODE GUC_FW_PATH(kbl, KBL_FW_MAJOR, KBL_FW_MINOR)
MODULE_FIRMWARE(I915_KBL_GUC_UCODE);

#define I915_GLK_GUC_UCODE GUC_FW_PATH(glk, GLK_FW_MAJOR, GLK_FW_MINOR)

/**
 * intel_guc_fw_select() - selects GuC firmware for uploading
 *
 * @guc:	intel_guc struct
 *
 * Return: zero when we know firmware, non-zero in other case
 */
int intel_guc_fw_select(struct intel_guc *guc)
{
	struct drm_i915_private *dev_priv = guc_to_i915(guc);

	intel_uc_fw_init(&guc->fw, INTEL_UC_FW_TYPE_GUC);

	if (i915_modparams.guc_firmware_path) {
		guc->fw.path = i915_modparams.guc_firmware_path;
		guc->fw.major_ver_wanted = 0;
		guc->fw.minor_ver_wanted = 0;
	} else if (IS_SKYLAKE(dev_priv)) {
		guc->fw.path = I915_SKL_GUC_UCODE;
		guc->fw.major_ver_wanted = SKL_FW_MAJOR;
		guc->fw.minor_ver_wanted = SKL_FW_MINOR;
	} else if (IS_BROXTON(dev_priv)) {
		guc->fw.path = I915_BXT_GUC_UCODE;
		guc->fw.major_ver_wanted = BXT_FW_MAJOR;
		guc->fw.minor_ver_wanted = BXT_FW_MINOR;
	} else if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) {
		guc->fw.path = I915_KBL_GUC_UCODE;
		guc->fw.major_ver_wanted = KBL_FW_MAJOR;
		guc->fw.minor_ver_wanted = KBL_FW_MINOR;
	} else if (IS_GEMINILAKE(dev_priv)) {
		guc->fw.path = I915_GLK_GUC_UCODE;
		guc->fw.major_ver_wanted = GLK_FW_MAJOR;
		guc->fw.minor_ver_wanted = GLK_FW_MINOR;
	} else {
		DRM_ERROR("No GuC firmware known for platform with GuC!\n");
		return -ENOENT;
	}

	return 0;
}

static void guc_prepare_xfer(struct intel_guc *guc)
{
	struct drm_i915_private *dev_priv = guc_to_i915(guc);

	/* Must program this register before loading the ucode with DMA */
	I915_WRITE(GUC_SHIM_CONTROL, GUC_DISABLE_SRAM_INIT_TO_ZEROES |
				     GUC_ENABLE_READ_CACHE_LOGIC |
				     GUC_ENABLE_MIA_CACHING |
				     GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA |
				     GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA |
				     GUC_ENABLE_MIA_CLOCK_GATING);

	if (IS_GEN9_LP(dev_priv))
		I915_WRITE(GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
	else
		I915_WRITE(GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE);

	if (IS_GEN9(dev_priv)) {
		/* DOP Clock Gating Enable for GuC clocks */
		I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
					    I915_READ(GEN7_MISCCPCTL)));

		/* allows for 5us (in 10ns units) before GT can go to RC6 */
		I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
	}
}

/* Copy RSA signature from the fw image to HW for verification */
static int guc_xfer_rsa(struct intel_guc *guc, struct i915_vma *vma)
{
	struct drm_i915_private *dev_priv = guc_to_i915(guc);
	struct intel_uc_fw *guc_fw = &guc->fw;
	struct sg_table *sg = vma->pages;
	u32 rsa[UOS_RSA_SCRATCH_COUNT];
	int i;

	if (sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, sizeof(rsa),
			       guc_fw->rsa_offset) != sizeof(rsa))
		return -EINVAL;

	for (i = 0; i < UOS_RSA_SCRATCH_COUNT; i++)
		I915_WRITE(UOS_RSA_SCRATCH(i), rsa[i]);

	return 0;
}

/*
 * Transfer the firmware image to RAM for execution by the microcontroller.
 *
 * Architecturally, the DMA engine is bidirectional, and can potentially even
 * transfer between GTT locations. This functionality is left out of the API
 * for now as there is no need for it.
 */
static int guc_xfer_ucode(struct intel_guc *guc, struct i915_vma *vma)
{
	struct drm_i915_private *dev_priv = guc_to_i915(guc);
	struct intel_uc_fw *guc_fw = &guc->fw;
	unsigned long offset;
	u32 status;
	int ret;

	/*
	 * The header plus uCode will be copied to WOPCM via DMA, excluding any
	 * other components
	 */
	I915_WRITE(DMA_COPY_SIZE, guc_fw->header_size + guc_fw->ucode_size);

	/* Set the source address for the new blob */
	offset = guc_ggtt_offset(vma) + guc_fw->header_offset;
	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);

	/*
	 * Set the DMA destination. Current uCode expects the code to be
	 * loaded at 8k; locations below this are used for the stack.
	 */
	I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);

	/* Finally start the DMA */
	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));

	/* Wait for DMA to finish */
	ret = __intel_wait_for_register_fw(dev_priv, DMA_CTRL, START_DMA, 0,
					   2, 100, &status);
	DRM_DEBUG_DRIVER("GuC DMA status %#x\n", status);

	return ret;
}

/*
 * Read the GuC status register (GUC_STATUS) and store it in the
 * specified location; then return a boolean indicating whether
 * the value matches either of two values representing completion
 * of the GuC boot process.
 *
 * This is used for polling the GuC status in a wait_for()
 * loop below.
 */
static inline bool guc_ready(struct intel_guc *guc, u32 *status)
{
	struct drm_i915_private *dev_priv = guc_to_i915(guc);
	u32 val = I915_READ(GUC_STATUS);
	u32 uk_val = val & GS_UKERNEL_MASK;

	*status = val;
	return (uk_val == GS_UKERNEL_READY) ||
		((val & GS_MIA_CORE_STATE) && (uk_val == GS_UKERNEL_LAPIC_DONE));
}

static int guc_wait_ucode(struct intel_guc *guc)
{
	u32 status;
	int ret;

	/*
	 * Wait for the GuC to start up.
	 * NB: Docs recommend not using the interrupt for completion.
	 * Measurements indicate this should take no more than 20ms, so a
	 * timeout here indicates that the GuC has failed and is unusable.
	 * (Higher levels of the driver will attempt to fall back to
	 * execlist mode if this happens.)
	 */
	ret = wait_for(guc_ready(guc, &status), 100);
	DRM_DEBUG_DRIVER("GuC status %#x\n", status);

	if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
		DRM_ERROR("GuC firmware signature verification failed\n");
		ret = -ENOEXEC;
	}

	return ret;
}

/*
 * Load the GuC firmware blob into the MinuteIA.
 */
static int guc_fw_xfer(struct intel_uc_fw *guc_fw, struct i915_vma *vma)
{
	struct intel_guc *guc = container_of(guc_fw, struct intel_guc, fw);
	struct drm_i915_private *dev_priv = guc_to_i915(guc);
	int ret;

	GEM_BUG_ON(guc_fw->type != INTEL_UC_FW_TYPE_GUC);

	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);

	guc_prepare_xfer(guc);

	/*
	 * Note that GuC needs the CSS header plus uKernel code to be copied
	 * by the DMA engine in one operation, whereas the RSA signature is
	 * loaded via MMIO.
	 */
	ret = guc_xfer_rsa(guc, vma);
	if (ret)
		DRM_WARN("GuC firmware signature xfer error %d\n", ret);

	ret = guc_xfer_ucode(guc, vma);
	if (ret)
		DRM_WARN("GuC firmware code xfer error %d\n", ret);

	ret = guc_wait_ucode(guc);
	if (ret)
		DRM_ERROR("GuC firmware xfer error %d\n", ret);

	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);

	return ret;
}

/**
 * intel_guc_fw_upload() - finish preparing the GuC for activity
 * @guc: intel_guc structure
 *
 * Called during driver loading and also after a GPU reset.
 *
 * The main action required here it to load the GuC uCode into the device.
 * The firmware image should have already been fetched into memory by the
 * earlier call to intel_guc_init(), so here we need only check that
 * worked, and then transfer the image to the h/w.
 *
 * Return:	non-zero code on error
 */
int intel_guc_fw_upload(struct intel_guc *guc)
{
	return intel_uc_fw_upload(&guc->fw, guc_fw_xfer);
}