linux_dsm_epyc7002/arch/arm/mach-omap2/io.c

718 lines
16 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/mach-omap2/io.c
*
* OMAP2 I/O mapping code
*
* Copyright (C) 2005 Nokia Corporation
* Copyright (C) 2007-2009 Texas Instruments
*
* Author:
* Juha Yrjola <juha.yrjola@nokia.com>
* Syed Khasim <x0khasim@ti.com>
*
* Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <asm/tlb.h>
#include <asm/mach/map.h>
ARM: OMAP: Move plat-omap/dma-omap.h to include/linux/omap-dma.h Based on earlier discussions[1] we attempted to find a suitable location for the omap DMA header in commit 2b6c4e73 (ARM: OMAP: DMA: Move plat/dma.h to plat-omap/dma-omap.h) until the conversion to dmaengine is complete. Unfortunately that was before I was able to try to test compile of the ARM multiplatform builds for omap2+, and the end result was not very good. So I'm creating yet another all over the place patch to cut the last dependency for building omap2+ for ARM multiplatform. After this, we have finally removed the driver dependencies to the arch/arm code, except for few drivers that are being worked on. The other option was to make the <plat-omap/dma-omap.h> path to work, but we'd have to add some new header directory to for multiplatform builds. Or we would have to manually include arch/arm/plat-omap/include again from arch/arm/Makefile for omap2+. Neither of these alternatives sound appealing as they will likely lead addition of various other headers exposed to the drivers, which we want to avoid for the multiplatform kernels. Since we already have a minimal include/linux/omap-dma.h, let's just use that instead and add a note to it to not use the custom omap DMA functions any longer where possible. Note that converting omap DMA to dmaengine depends on dmaengine supporting automatically incrementing the FIFO address at the device end, and converting all the remaining legacy drivers. So it's going to be few more merge windows. [1] https://patchwork.kernel.org/patch/1519591/# cc: Russell King <linux@arm.linux.org.uk> cc: Kevin Hilman <khilman@ti.com> cc: "Benoît Cousson" <b-cousson@ti.com> cc: Herbert Xu <herbert@gondor.apana.org.au> cc: "David S. Miller" <davem@davemloft.net> cc: Vinod Koul <vinod.koul@intel.com> cc: Dan Williams <djbw@fb.com> cc: Mauro Carvalho Chehab <mchehab@infradead.org> cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> cc: David Woodhouse <dwmw2@infradead.org> cc: Kyungmin Park <kyungmin.park@samsung.com> cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Tomi Valkeinen <tomi.valkeinen@ti.com> cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> cc: Hans Verkuil <hans.verkuil@cisco.com> cc: Vaibhav Hiremath <hvaibhav@ti.com> cc: Lokesh Vutla <lokeshvutla@ti.com> cc: Rusty Russell <rusty@rustcorp.com.au> cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> cc: Afzal Mohammed <afzal@ti.com> cc: linux-crypto@vger.kernel.org cc: linux-media@vger.kernel.org cc: linux-mtd@lists.infradead.org cc: linux-usb@vger.kernel.org cc: linux-fbdev@vger.kernel.org Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-11-30 23:41:50 +07:00
#include <linux/omap-dma.h>
#include "omap_hwmod.h"
ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ As the plat and mach includes need to disappear for single zImage work, we need to remove plat/hardware.h. Do this by splitting plat/hardware.h into omap1 and omap2+ specific files. The old plat/hardware.h already has omap1 only defines, so it gets moved to mach/hardware.h for omap1. For omap2+, we use the local soc.h that for now just includes the related SoC headers to keep this patch more readable. Note that the local soc.h still includes plat/cpu.h that can be dealt with in later patches. Let's also include plat/serial.h from common.h for all the board-*.c files. This allows making the include files local later on without patching these files again. Note that only minimal changes are done in this patch for the drivers/watchdog/omap_wdt.c driver to keep things compiling. Further patches are needed to eventually remove cpu_is_omap usage in the drivers. Also only minimal changes are done to sound/soc/omap/* to remove the unneeded includes and to define OMAP44XX_MCPDM_L3_BASE locally so there's no need to include omap44xx.h. While at it, also sort some of the includes in the standard way. Cc: linux-watchdog@vger.kernel.org Cc: alsa-devel@alsa-project.org Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-01 00:59:07 +07:00
#include "soc.h"
#include "iomap.h"
#include "voltage.h"
#include "powerdomain.h"
#include "clockdomain.h"
#include "common.h"
#include "clock.h"
#include "clock2xxx.h"
#include "clock3xxx.h"
#include "sdrc.h"
#include "control.h"
#include "serial.h"
#include "sram.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm33xx.h"
#include "cm44xx.h"
#include "prm.h"
#include "cm.h"
#include "prcm_mpu44xx.h"
#include "prminst44xx.h"
#include "prm2xxx.h"
#include "prm3xxx.h"
#include "prm33xx.h"
#include "prm44xx.h"
#include "opp2xxx.h"
ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-21 18:04:52 +07:00
/*
* omap_clk_soc_init: points to a function that does the SoC-specific
ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-21 18:04:52 +07:00
* clock initializations
*/
static int (*omap_clk_soc_init)(void);
ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized clk inits on OMAP happen quite early, even before slab is available. The dependency comes from the fact that the timer init code starts to use clocks and hwmod and we need clocks to be initialized by then. There are various problems doing clk inits this early, one is, not being able to do dynamic clk registrations and hence the dependency on clk-private.h. The other is, inability to debug early kernel crashes without enabling DEBUG_LL and earlyprintk. Doing early clk init also exposed another instance of a kernel panic due to a BUG() when CONFIG_DEBUG_SLAB is enabled. [ 0.000000] Kernel BUG at c01174f8 [verbose debug info unavailable] [ 0.000000] Internal error: Oops - BUG: 0 [#1] SMP ARM [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.9.0-rc1-12179-g72d48f9 #6) [ 0.000000] PC is at __kmalloc+0x1d4/0x248 [ 0.000000] LR is at __clk_init+0x2e0/0x364 [ 0.000000] pc : [<c01174f8>] lr : [<c0441f54>] psr: 600001d3 [ 0.000000] sp : c076ff28 ip : c065cefc fp : c0441f54 [ 0.000000] r10: 0000001c r9 : 000080d0 r8 : c076ffd4 [ 0.000000] r7 : c074b578 r6 : c0794d88 r5 : 00000040 r4 : 00000000 [ 0.000000] r3 : 00000000 r2 : c07cac70 r1 : 000080d0 r0 : 0000001c [ 0.000000] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment kernel [ 0.000000] Control: 10c53c7d Table: 8000404a DAC: 00000017 [ 0.000000] Process swapper (pid: 0, stack limit = 0xc076e240) [ 0.000000] Stack: (0xc076ff28 to 0xc0770000) [ 0.000000] ff20: 22222222 c0794ec8 c06546e8 00000000 00000040 c0794d88 [ 0.000000] ff40: c074b578 c076ffd4 c07951c8 c076e000 00000000 c0441f54 c074b578 c076ffd4 [ 0.000000] ff60: c0793828 00000040 c0794d88 c074b578 c076ffd4 c0776900 c076e000 c07272ac [ 0.000000] ff80: 2f800000 c074c968 c07f93d0 c0719780 c076ffa0 c076ff98 00000000 00000000 [ 0.000000] ffa0: 00000000 00000000 00000000 00000001 c074cd6c c077b1ec 8000406a c0715724 [ 0.000000] ffc0: 00000000 00000000 00000000 00000000 00000000 c074c968 10c53c7d c0776974 [ 0.000000] ffe0: c074cd6c c077b1ec 8000406a 411fc092 00000000 80008074 00000000 00000000 [ 0.000000] [<c01174f8>] (__kmalloc+0x1d4/0x248) from [<c0441f54>] (__clk_init+0x2e0/0x364) [ 0.000000] [<c0441f54>] (__clk_init+0x2e0/0x364) from [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) [ 0.000000] [<c07272ac>] (omap4xxx_clk_init+0xbc/0x140) from [<c0719780>] (setup_arch+0x15c/0x284) [ 0.000000] [<c0719780>] (setup_arch+0x15c/0x284) from [<c0715724>] (start_kernel+0x7c/0x334) [ 0.000000] [<c0715724>] (start_kernel+0x7c/0x334) from [<80008074>] (0x80008074) [ 0.000000] Code: e5883004 e1a00006 e28dd00c e8bd8ff0 (e7f001f2) [ 0.000000] ---[ end trace 1b75b31a2719ed1c ]--- [ 0.000000] Kernel panic - not syncing: Attempted to kill the idle task! It was a know issue, that slab allocations would fail when common clock core tries to cache parent pointers for mux clocks on OMAP, and hence a patch 'clk: Allow late cache allocation for clk->parents, commit 7975059d' was added to work this problem around. A BUG() within kmalloc() with CONFIG_DEBUG_SLAB enabled was completely overlooked causing this regression. More details on the issue reported can be found here, http://www.mail-archive.com/linux-omap@vger.kernel.org/msg85932.html With all these issues around clk inits happening way too early, it makes sense to at least move them to a point where dynamic memory allocations are possible. So move them to a point just before the timer code starts using clocks and hwmod. This should at least pave way for clk inits on OMAP moving to dynamic clock registrations instead of using the static macros defined in clk-private.h. The issue with kernel panic while CONFIG_DEBUG_SLAB is enabled was reported by Piotr Haber and Tony Lindgren and this patch fixes the reported issue as well. Reported-by: Piotr Haber <phaber@broadcom.com> Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Reviewed-by: Mike Turquette <mturquette@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: stable@vger.kernel.org # v3.8 Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-21 18:04:52 +07:00
/*
* The machine specific code may provide the extra mapping besides the
* default mapping provided here.
*/
#if defined(CONFIG_SOC_OMAP2420) || defined(CONFIG_SOC_OMAP2430)
static struct map_desc omap24xx_io_desc[] __initdata = {
{
.virtual = L3_24XX_VIRT,
.pfn = __phys_to_pfn(L3_24XX_PHYS),
.length = L3_24XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_24XX_VIRT,
.pfn = __phys_to_pfn(L4_24XX_PHYS),
.length = L4_24XX_SIZE,
.type = MT_DEVICE
},
};
#ifdef CONFIG_SOC_OMAP2420
static struct map_desc omap242x_io_desc[] __initdata = {
{
.virtual = DSP_MEM_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MEM_2420_PHYS),
.length = DSP_MEM_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_IPI_2420_VIRT,
.pfn = __phys_to_pfn(DSP_IPI_2420_PHYS),
.length = DSP_IPI_2420_SIZE,
.type = MT_DEVICE
},
{
.virtual = DSP_MMU_2420_VIRT,
.pfn = __phys_to_pfn(DSP_MMU_2420_PHYS),
.length = DSP_MMU_2420_SIZE,
.type = MT_DEVICE
},
};
#endif
#ifdef CONFIG_SOC_OMAP2430
static struct map_desc omap243x_io_desc[] __initdata = {
{
.virtual = L4_WK_243X_VIRT,
.pfn = __phys_to_pfn(L4_WK_243X_PHYS),
.length = L4_WK_243X_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS),
.length = OMAP243X_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SDRC_PHYS),
.length = OMAP243X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP243X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP243X_SMS_PHYS),
.length = OMAP243X_SMS_SIZE,
.type = MT_DEVICE
},
};
#endif
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct map_desc omap34xx_io_desc[] __initdata = {
{
.virtual = L3_34XX_VIRT,
.pfn = __phys_to_pfn(L3_34XX_PHYS),
.length = L3_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP34XX_GPMC_VIRT,
.pfn = __phys_to_pfn(OMAP34XX_GPMC_PHYS),
.length = OMAP34XX_GPMC_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SMS_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SMS_PHYS),
.length = OMAP343X_SMS_SIZE,
.type = MT_DEVICE
},
{
.virtual = OMAP343X_SDRC_VIRT,
.pfn = __phys_to_pfn(OMAP343X_SDRC_PHYS),
.length = OMAP343X_SDRC_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_PER_34XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_34XX_PHYS),
.length = L4_PER_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_EMU_34XX_VIRT,
.pfn = __phys_to_pfn(L4_EMU_34XX_PHYS),
.length = L4_EMU_34XX_SIZE,
.type = MT_DEVICE
},
};
#endif
#ifdef CONFIG_SOC_TI81XX
static struct map_desc omapti81xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
}
};
#endif
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static struct map_desc omapam33xx_io_desc[] __initdata = {
{
.virtual = L4_34XX_VIRT,
.pfn = __phys_to_pfn(L4_34XX_PHYS),
.length = L4_34XX_SIZE,
.type = MT_DEVICE
},
{
.virtual = L4_WK_AM33XX_VIRT,
.pfn = __phys_to_pfn(L4_WK_AM33XX_PHYS),
.length = L4_WK_AM33XX_SIZE,
.type = MT_DEVICE
}
};
#endif
#ifdef CONFIG_ARCH_OMAP4
static struct map_desc omap44xx_io_desc[] __initdata = {
{
.virtual = L3_44XX_VIRT,
.pfn = __phys_to_pfn(L3_44XX_PHYS),
.length = L3_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_44XX_VIRT,
.pfn = __phys_to_pfn(L4_44XX_PHYS),
.length = L4_44XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER_44XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_44XX_PHYS),
.length = L4_PER_44XX_SIZE,
.type = MT_DEVICE,
},
};
#endif
#ifdef CONFIG_SOC_OMAP5
static struct map_desc omap54xx_io_desc[] __initdata = {
{
.virtual = L3_54XX_VIRT,
.pfn = __phys_to_pfn(L3_54XX_PHYS),
.length = L3_54XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_54XX_VIRT,
.pfn = __phys_to_pfn(L4_54XX_PHYS),
.length = L4_54XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_WK_54XX_VIRT,
.pfn = __phys_to_pfn(L4_WK_54XX_PHYS),
.length = L4_WK_54XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER_54XX_VIRT,
.pfn = __phys_to_pfn(L4_PER_54XX_PHYS),
.length = L4_PER_54XX_SIZE,
.type = MT_DEVICE,
},
};
#endif
#ifdef CONFIG_SOC_DRA7XX
static struct map_desc dra7xx_io_desc[] __initdata = {
{
.virtual = L4_CFG_MPU_DRA7XX_VIRT,
.pfn = __phys_to_pfn(L4_CFG_MPU_DRA7XX_PHYS),
.length = L4_CFG_MPU_DRA7XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L3_MAIN_SN_DRA7XX_VIRT,
.pfn = __phys_to_pfn(L3_MAIN_SN_DRA7XX_PHYS),
.length = L3_MAIN_SN_DRA7XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER1_DRA7XX_VIRT,
.pfn = __phys_to_pfn(L4_PER1_DRA7XX_PHYS),
.length = L4_PER1_DRA7XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER2_DRA7XX_VIRT,
.pfn = __phys_to_pfn(L4_PER2_DRA7XX_PHYS),
.length = L4_PER2_DRA7XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_PER3_DRA7XX_VIRT,
.pfn = __phys_to_pfn(L4_PER3_DRA7XX_PHYS),
.length = L4_PER3_DRA7XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_CFG_DRA7XX_VIRT,
.pfn = __phys_to_pfn(L4_CFG_DRA7XX_PHYS),
.length = L4_CFG_DRA7XX_SIZE,
.type = MT_DEVICE,
},
{
.virtual = L4_WKUP_DRA7XX_VIRT,
.pfn = __phys_to_pfn(L4_WKUP_DRA7XX_PHYS),
.length = L4_WKUP_DRA7XX_SIZE,
.type = MT_DEVICE,
},
};
#endif
#ifdef CONFIG_SOC_OMAP2420
void __init omap242x_map_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap242x_io_desc, ARRAY_SIZE(omap242x_io_desc));
}
#endif
#ifdef CONFIG_SOC_OMAP2430
void __init omap243x_map_io(void)
{
iotable_init(omap24xx_io_desc, ARRAY_SIZE(omap24xx_io_desc));
iotable_init(omap243x_io_desc, ARRAY_SIZE(omap243x_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP3
void __init omap3_map_io(void)
{
iotable_init(omap34xx_io_desc, ARRAY_SIZE(omap34xx_io_desc));
}
#endif
#ifdef CONFIG_SOC_TI81XX
void __init ti81xx_map_io(void)
{
iotable_init(omapti81xx_io_desc, ARRAY_SIZE(omapti81xx_io_desc));
}
#endif
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
void __init am33xx_map_io(void)
{
iotable_init(omapam33xx_io_desc, ARRAY_SIZE(omapam33xx_io_desc));
}
#endif
#ifdef CONFIG_ARCH_OMAP4
void __init omap4_map_io(void)
{
iotable_init(omap44xx_io_desc, ARRAY_SIZE(omap44xx_io_desc));
omap_barriers_init();
}
#endif
#ifdef CONFIG_SOC_OMAP5
void __init omap5_map_io(void)
{
iotable_init(omap54xx_io_desc, ARRAY_SIZE(omap54xx_io_desc));
omap_barriers_init();
}
#endif
#ifdef CONFIG_SOC_DRA7XX
void __init dra7xx_map_io(void)
{
iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
omap_barriers_init();
}
#endif
/*
* omap2_init_reprogram_sdrc - reprogram SDRC timing parameters
*
* Sets the CORE DPLL3 M2 divider to the same value that it's at
* currently. This has the effect of setting the SDRC SDRAM AC timing
* registers to the values currently defined by the kernel. Currently
* only defined for OMAP3; will return 0 if called on OMAP2. Returns
* -EINVAL if the dpll3_m2_ck cannot be found, 0 if called on OMAP2,
* or passes along the return value of clk_set_rate().
*/
static int __init _omap2_init_reprogram_sdrc(void)
{
struct clk *dpll3_m2_ck;
int v = -EINVAL;
long rate;
if (!cpu_is_omap34xx())
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
pr_info("Reprogramming SDRC clock to %ld Hz\n", rate);
v = clk_set_rate(dpll3_m2_ck, rate);
if (v)
pr_err("dpll3_m2_clk rate change failed: %d\n", v);
clk_put(dpll3_m2_ck);
return v;
}
static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data)
{
return omap_hwmod_set_postsetup_state(oh, *(u8 *)data);
}
static void __init __maybe_unused omap_hwmod_init_postsetup(void)
{
u8 postsetup_state = _HWMOD_STATE_DEFAULT;
/* Set the default postsetup state for all hwmods */
omap_hwmod_for_each(_set_hwmod_postsetup_state, &postsetup_state);
}
#ifdef CONFIG_SOC_OMAP2420
void __init omap2420_init_early(void)
{
omap2_set_globals_tap(OMAP242X_CLASS, OMAP2_L4_IO_ADDRESS(0x48014000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE));
omap2_control_base_init();
omap2xxx_check_revision();
omap2_prcm_base_init();
omap2xxx_voltagedomains_init();
omap242x_powerdomains_init();
omap242x_clockdomains_init();
omap2420_hwmod_init();
omap_hwmod_init_postsetup();
omap_clk_soc_init = omap2420_dt_clk_init;
rate_table = omap2420_rate_table;
}
void __init omap2420_init_late(void)
{
omap_pm_soc_init = omap2_pm_init;
}
#endif
#ifdef CONFIG_SOC_OMAP2430
void __init omap2430_init_early(void)
{
omap2_set_globals_tap(OMAP243X_CLASS, OMAP2_L4_IO_ADDRESS(0x4900a000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE));
omap2_control_base_init();
omap2xxx_check_revision();
omap2_prcm_base_init();
omap2xxx_voltagedomains_init();
omap243x_powerdomains_init();
omap243x_clockdomains_init();
omap2430_hwmod_init();
omap_hwmod_init_postsetup();
omap_clk_soc_init = omap2430_dt_clk_init;
rate_table = omap2430_rate_table;
}
void __init omap2430_init_late(void)
{
omap_pm_soc_init = omap2_pm_init;
}
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 23:14:10 +07:00
#endif
/*
* Currently only board-omap3beagle.c should call this because of the
* same machine_id for 34xx and 36xx beagle.. Will get fixed with DT.
*/
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 23:14:10 +07:00
#ifdef CONFIG_ARCH_OMAP3
void __init omap3_init_early(void)
{
omap2_set_globals_tap(OMAP343X_CLASS, OMAP2_L4_IO_ADDRESS(0x4830A000));
omap2_set_globals_sdrc(OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE));
omap2_control_base_init();
omap3xxx_check_revision();
omap3xxx_check_features();
omap2_prcm_base_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
omap3xxx_clockdomains_init();
omap3xxx_hwmod_init();
omap_hwmod_init_postsetup();
}
void __init omap3430_init_early(void)
{
omap3_init_early();
omap_clk_soc_init = omap3430_dt_clk_init;
}
void __init omap35xx_init_early(void)
{
omap3_init_early();
omap_clk_soc_init = omap3430_dt_clk_init;
}
void __init omap3630_init_early(void)
{
omap3_init_early();
omap_clk_soc_init = omap3630_dt_clk_init;
}
void __init am35xx_init_early(void)
{
omap3_init_early();
omap_clk_soc_init = am35xx_dt_clk_init;
}
void __init omap3_init_late(void)
{
omap_pm_soc_init = omap3_pm_init;
}
void __init ti81xx_init_late(void)
{
omap_pm_soc_init = omap_pm_nop_init;
}
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 23:14:10 +07:00
#endif
#ifdef CONFIG_SOC_TI81XX
void __init ti814x_init_early(void)
{
omap2_set_globals_tap(TI814X_CLASS,
OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
omap2_control_base_init();
omap3xxx_check_revision();
ti81xx_check_features();
omap2_prcm_base_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
ti814x_clockdomains_init();
dm814x_hwmod_init();
omap_hwmod_init_postsetup();
omap_clk_soc_init = dm814x_dt_clk_init;
}
void __init ti816x_init_early(void)
{
omap2_set_globals_tap(TI816X_CLASS,
OMAP2_L4_IO_ADDRESS(TI81XX_TAP_BASE));
omap2_control_base_init();
omap3xxx_check_revision();
ti81xx_check_features();
omap2_prcm_base_init();
omap3xxx_voltagedomains_init();
omap3xxx_powerdomains_init();
ti816x_clockdomains_init();
dm816x_hwmod_init();
omap_hwmod_init_postsetup();
omap_clk_soc_init = dm816x_dt_clk_init;
}
#endif
#ifdef CONFIG_SOC_AM33XX
void __init am33xx_init_early(void)
{
omap2_set_globals_tap(AM335X_CLASS,
AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
omap2_control_base_init();
omap3xxx_check_revision();
am33xx_check_features();
omap2_prcm_base_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_hwmod_init_postsetup();
omap_clk_soc_init = am33xx_dt_clk_init;
}
void __init am33xx_init_late(void)
{
omap_pm_soc_init = amx3_common_pm_init;
}
#endif
#ifdef CONFIG_SOC_AM43XX
void __init am43xx_init_early(void)
{
omap2_set_globals_tap(AM335X_CLASS,
AM33XX_L4_WK_IO_ADDRESS(AM33XX_TAP_BASE));
omap2_control_base_init();
omap3xxx_check_revision();
am33xx_check_features();
omap2_prcm_base_init();
am43xx_powerdomains_init();
am43xx_clockdomains_init();
am43xx_hwmod_init();
omap_hwmod_init_postsetup();
omap_l2_cache_init();
omap_clk_soc_init = am43xx_dt_clk_init;
}
void __init am43xx_init_late(void)
{
omap_pm_soc_init = amx3_common_pm_init;
}
#endif
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 23:14:10 +07:00
#ifdef CONFIG_ARCH_OMAP4
void __init omap4430_init_early(void)
{
omap2_set_globals_tap(OMAP443X_CLASS,
OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE));
omap2_control_base_init();
omap4xxx_check_revision();
omap4xxx_check_features();
omap2_prcm_base_init();
omap4_sar_ram_init();
omap4_mpuss_early_init();
omap4_pm_init_early();
omap44xx_voltagedomains_init();
omap44xx_powerdomains_init();
omap44xx_clockdomains_init();
omap44xx_hwmod_init();
omap_hwmod_init_postsetup();
omap_l2_cache_init();
omap_clk_soc_init = omap4xxx_dt_clk_init;
}
void __init omap4430_init_late(void)
{
omap_pm_soc_init = omap4_pm_init;
}
ARM: OMAP: Fix errors and warnings when building for one board When customizing omap2plus_defconfig to build for only one board (omap3evm), I came across these warnings and errors (filenames truncated): arch/arm/mach-omap2/board-generic.c:76:20: warning: 'omap4_init' defined but not used arch/arm/mach-omap2/built-in.o: In function `omap2420_init_early': arch/arm/mach-omap2/io.c:364: undefined reference to `omap2_set_globals_242x' arch/arm/mach-omap2/io.c:366: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:367: undefined reference to `omap242x_powerdomains_init' arch/arm/mach-omap2/io.c:368: undefined reference to `omap242x_clockdomains_init' arch/arm/mach-omap2/io.c:369: undefined reference to `omap2420_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:376: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:378: undefined reference to `omap2xxx_voltagedomains_init' arch/arm/mach-omap2/io.c:379: undefined reference to `omap243x_powerdomains_init' arch/arm/mach-omap2/io.c:380: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:381: undefined reference to `omap2430_hwmod_init' arch/arm/mach-omap2/built-in.o: In function `omap4430_init_early': arch/arm/mach-omap2/io.c:436: undefined reference to `omap2_set_globals_443x' arch/arm/mach-omap2/io.c:438: undefined reference to `omap44xx_voltagedomains_init' arch/arm/mach-omap2/io.c:439: undefined reference to `omap44xx_powerdomains_init' arch/arm/mach-omap2/io.c:440: undefined reference to `omap44xx_clockdomains_init' arch/arm/mach-omap2/io.c:441: undefined reference to `omap44xx_hwmod_init' This patch fixes them. Signed-off-by: Sanjeev Premi <premi@ti.com> Acked-by: Thomas Weber <weber@corscience.de> [tony@atomide.com: updated to fix warnings for board-generic.c] Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-10-13 23:14:10 +07:00
#endif
#ifdef CONFIG_SOC_OMAP5
void __init omap5_init_early(void)
{
omap2_set_globals_tap(OMAP54XX_CLASS,
OMAP2_L4_IO_ADDRESS(OMAP54XX_SCM_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
omap2_control_base_init();
omap2_prcm_base_init();
omap5xxx_check_revision();
omap4_sar_ram_init();
omap4_mpuss_early_init();
omap4_pm_init_early();
omap54xx_voltagedomains_init();
omap54xx_powerdomains_init();
omap54xx_clockdomains_init();
omap54xx_hwmod_init();
omap_hwmod_init_postsetup();
omap_clk_soc_init = omap5xxx_dt_clk_init;
}
void __init omap5_init_late(void)
{
omap_pm_soc_init = omap4_pm_init;
}
#endif
#ifdef CONFIG_SOC_DRA7XX
void __init dra7xx_init_early(void)
{
omap2_set_globals_tap(DRA7XX_CLASS,
OMAP2_L4_IO_ADDRESS(DRA7XX_TAP_BASE));
omap2_set_globals_prcm_mpu(OMAP2_L4_IO_ADDRESS(OMAP54XX_PRCM_MPU_BASE));
omap2_control_base_init();
omap4_pm_init_early();
omap2_prcm_base_init();
dra7xxx_check_revision();
dra7xx_powerdomains_init();
dra7xx_clockdomains_init();
dra7xx_hwmod_init();
omap_hwmod_init_postsetup();
omap_clk_soc_init = dra7xx_dt_clk_init;
}
void __init dra7xx_init_late(void)
{
omap_pm_soc_init = omap4_pm_init;
}
#endif
void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1)
{
omap_sram_init();
if (cpu_is_omap24xx() || omap3_has_sdrc()) {
omap2_sdrc_init(sdrc_cs0, sdrc_cs1);
_omap2_init_reprogram_sdrc();
}
}
int __init omap_clk_init(void)
{
int ret = 0;
if (!omap_clk_soc_init)
return 0;
ti_clk_init_features();
omap2_clk_setup_ll_ops();
ret = omap_control_init();
if (ret)
return ret;
ret = omap_prcm_init();
if (ret)
return ret;
of_clk_init(NULL);
ti_dt_clk_init_retry_clks();
ti_dt_clockdomains_setup();
ret = omap_clk_soc_init();
return ret;
}