linux_dsm_epyc7002/drivers/platform/mellanox/mlxbf-bootctl.c

322 lines
8.3 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0+
/*
* Mellanox boot control driver
*
* This driver provides a sysfs interface for systems management
* software to manage reset-time actions.
*
* Copyright (C) 2019 Mellanox Technologies
*/
#include <linux/acpi.h>
#include <linux/arm-smccc.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "mlxbf-bootctl.h"
#define MLXBF_BOOTCTL_SB_SECURE_MASK 0x03
#define MLXBF_BOOTCTL_SB_TEST_MASK 0x0c
#define MLXBF_SB_KEY_NUM 4
/* UUID used to probe ATF service. */
static const char *mlxbf_bootctl_svc_uuid_str =
"89c036b4-e7d7-11e6-8797-001aca00bfc4";
struct mlxbf_bootctl_name {
u32 value;
const char *name;
};
static struct mlxbf_bootctl_name boot_names[] = {
{ MLXBF_BOOTCTL_EXTERNAL, "external" },
{ MLXBF_BOOTCTL_EMMC, "emmc" },
{ MLNX_BOOTCTL_SWAP_EMMC, "swap_emmc" },
{ MLXBF_BOOTCTL_EMMC_LEGACY, "emmc_legacy" },
{ MLXBF_BOOTCTL_NONE, "none" },
};
static const char * const mlxbf_bootctl_lifecycle_states[] = {
[0] = "Production",
[1] = "GA Secured",
[2] = "GA Non-Secured",
[3] = "RMA",
};
/* ARM SMC call which is atomic and no need for lock. */
static int mlxbf_bootctl_smc(unsigned int smc_op, int smc_arg)
{
struct arm_smccc_res res;
arm_smccc_smc(smc_op, smc_arg, 0, 0, 0, 0, 0, 0, &res);
return res.a0;
}
/* Return the action in integer or an error code. */
static int mlxbf_bootctl_reset_action_to_val(const char *action)
{
int i;
for (i = 0; i < ARRAY_SIZE(boot_names); i++)
if (sysfs_streq(boot_names[i].name, action))
return boot_names[i].value;
return -EINVAL;
}
/* Return the action in string. */
static const char *mlxbf_bootctl_action_to_string(int action)
{
int i;
for (i = 0; i < ARRAY_SIZE(boot_names); i++)
if (boot_names[i].value == action)
return boot_names[i].name;
return "invalid action";
}
static ssize_t post_reset_wdog_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int ret;
ret = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_POST_RESET_WDOG, 0);
if (ret < 0)
return ret;
return sprintf(buf, "%d\n", ret);
}
static ssize_t post_reset_wdog_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
unsigned long value;
int ret;
ret = kstrtoul(buf, 10, &value);
if (ret)
return ret;
ret = mlxbf_bootctl_smc(MLXBF_BOOTCTL_SET_POST_RESET_WDOG, value);
if (ret < 0)
return ret;
return count;
}
static ssize_t mlxbf_bootctl_show(int smc_op, char *buf)
{
int action;
action = mlxbf_bootctl_smc(smc_op, 0);
if (action < 0)
return action;
return sprintf(buf, "%s\n", mlxbf_bootctl_action_to_string(action));
}
static int mlxbf_bootctl_store(int smc_op, const char *buf, size_t count)
{
int ret, action;
action = mlxbf_bootctl_reset_action_to_val(buf);
if (action < 0)
return action;
ret = mlxbf_bootctl_smc(smc_op, action);
if (ret < 0)
return ret;
return count;
}
static ssize_t reset_action_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return mlxbf_bootctl_show(MLXBF_BOOTCTL_GET_RESET_ACTION, buf);
}
static ssize_t reset_action_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return mlxbf_bootctl_store(MLXBF_BOOTCTL_SET_RESET_ACTION, buf, count);
}
static ssize_t second_reset_action_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
return mlxbf_bootctl_show(MLXBF_BOOTCTL_GET_SECOND_RESET_ACTION, buf);
}
static ssize_t second_reset_action_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return mlxbf_bootctl_store(MLXBF_BOOTCTL_SET_SECOND_RESET_ACTION, buf,
count);
}
static ssize_t lifecycle_state_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
int lc_state;
lc_state = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS,
MLXBF_BOOTCTL_FUSE_STATUS_LIFECYCLE);
if (lc_state < 0)
return lc_state;
lc_state &=
MLXBF_BOOTCTL_SB_TEST_MASK | MLXBF_BOOTCTL_SB_SECURE_MASK;
/*
* If the test bits are set, we specify that the current state may be
* due to using the test bits.
*/
if (lc_state & MLXBF_BOOTCTL_SB_TEST_MASK) {
lc_state &= MLXBF_BOOTCTL_SB_SECURE_MASK;
return sprintf(buf, "%s(test)\n",
mlxbf_bootctl_lifecycle_states[lc_state]);
}
return sprintf(buf, "%s\n", mlxbf_bootctl_lifecycle_states[lc_state]);
}
static ssize_t secure_boot_fuse_state_show(struct device *dev,
struct device_attribute *attr,
char *buf)
{
int burnt, valid, key, key_state, buf_len = 0, upper_key_used = 0;
const char *status;
key_state = mlxbf_bootctl_smc(MLXBF_BOOTCTL_GET_TBB_FUSE_STATUS,
MLXBF_BOOTCTL_FUSE_STATUS_KEYS);
if (key_state < 0)
return key_state;
/*
* key_state contains the bits for 4 Key versions, loaded from eFuses
* after a hard reset. Lower 4 bits are a thermometer code indicating
* key programming has started for key n (0000 = none, 0001 = version 0,
* 0011 = version 1, 0111 = version 2, 1111 = version 3). Upper 4 bits
* are a thermometer code indicating key programming has completed for
* key n (same encodings as the start bits). This allows for detection
* of an interruption in the progamming process which has left the key
* partially programmed (and thus invalid). The process is to burn the
* eFuse for the new key start bit, burn the key eFuses, then burn the
* eFuse for the new key complete bit.
*
* For example 0000_0000: no key valid, 0001_0001: key version 0 valid,
* 0011_0011: key 1 version valid, 0011_0111: key version 2 started
* programming but did not complete, etc. The most recent key for which
* both start and complete bit is set is loaded. On soft reset, this
* register is not modified.
*/
for (key = MLXBF_SB_KEY_NUM - 1; key >= 0; key--) {
burnt = key_state & BIT(key);
valid = key_state & BIT(key + MLXBF_SB_KEY_NUM);
if (burnt && valid)
upper_key_used = 1;
if (upper_key_used) {
if (burnt)
status = valid ? "Used" : "Wasted";
else
status = valid ? "Invalid" : "Skipped";
} else {
if (burnt)
status = valid ? "InUse" : "Incomplete";
else
status = valid ? "Invalid" : "Free";
}
buf_len += sprintf(buf + buf_len, "%d:%s ", key, status);
}
buf_len += sprintf(buf + buf_len, "\n");
return buf_len;
}
static DEVICE_ATTR_RW(post_reset_wdog);
static DEVICE_ATTR_RW(reset_action);
static DEVICE_ATTR_RW(second_reset_action);
static DEVICE_ATTR_RO(lifecycle_state);
static DEVICE_ATTR_RO(secure_boot_fuse_state);
static struct attribute *mlxbf_bootctl_attrs[] = {
&dev_attr_post_reset_wdog.attr,
&dev_attr_reset_action.attr,
&dev_attr_second_reset_action.attr,
&dev_attr_lifecycle_state.attr,
&dev_attr_secure_boot_fuse_state.attr,
NULL
};
ATTRIBUTE_GROUPS(mlxbf_bootctl);
static const struct acpi_device_id mlxbf_bootctl_acpi_ids[] = {
{"MLNXBF04", 0},
{}
};
MODULE_DEVICE_TABLE(acpi, mlxbf_bootctl_acpi_ids);
static bool mlxbf_bootctl_guid_match(const guid_t *guid,
const struct arm_smccc_res *res)
{
guid_t id = GUID_INIT(res->a0, res->a1, res->a1 >> 16,
res->a2, res->a2 >> 8, res->a2 >> 16,
res->a2 >> 24, res->a3, res->a3 >> 8,
res->a3 >> 16, res->a3 >> 24);
return guid_equal(guid, &id);
}
static int mlxbf_bootctl_probe(struct platform_device *pdev)
{
struct arm_smccc_res res = { 0 };
guid_t guid;
int ret;
/* Ensure we have the UUID we expect for this service. */
arm_smccc_smc(MLXBF_BOOTCTL_SIP_SVC_UID, 0, 0, 0, 0, 0, 0, 0, &res);
guid_parse(mlxbf_bootctl_svc_uuid_str, &guid);
if (!mlxbf_bootctl_guid_match(&guid, &res))
return -ENODEV;
/*
* When watchdog is used, it sets boot mode to MLXBF_BOOTCTL_SWAP_EMMC
* in case of boot failures. However it doesn't clear the state if there
* is no failure. Restore the default boot mode here to avoid any
* unnecessary boot partition swapping.
*/
ret = mlxbf_bootctl_smc(MLXBF_BOOTCTL_SET_RESET_ACTION,
MLXBF_BOOTCTL_EMMC);
if (ret < 0)
dev_warn(&pdev->dev, "Unable to reset the EMMC boot mode\n");
return 0;
}
static struct platform_driver mlxbf_bootctl_driver = {
.probe = mlxbf_bootctl_probe,
.driver = {
.name = "mlxbf-bootctl",
.groups = mlxbf_bootctl_groups,
.acpi_match_table = mlxbf_bootctl_acpi_ids,
}
};
module_platform_driver(mlxbf_bootctl_driver);
MODULE_DESCRIPTION("Mellanox boot control driver");
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Mellanox Technologies");