AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
d05e4c8600
linux_dsm_epyc7002/arch/arm/mach-bcm/board_bcm2835.c

30 lines
525 B
C
Raw Normal View History

ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier Adopt the SPDX license identifier headers to ease license compliance management. Cc: Simon Arlott <simon@arlott.org> Cc: Kapil Hali <kapilh@broadcom.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2018-10-23 03:18:39 +07:00
// SPDX-License-Identifier: GPL-2.0+
ARM: add infra-structure for BCM2835 and Raspberry Pi The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC. http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note that the documentation in the latter .pdf assumes the MMU setup that's used on the "VideoCore" companion processor, and does not document physical peripheral addresses. Subtract 0x5e000000 to obtain the physical addresses. This is accounted for by the ranges property in the /soc node in the device tree. The BCM2835 SoC is used in the Raspberry Pi. This patch also adds a minimal device tree for this board; enough to see some very early kernel boot messages through earlyprintk. However, this patch does not yet provide a useful booting system. http://www.raspberrypi.org/. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split from 3-4 months ago, and significantly stripped down and modified since. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 14:04:43 +07:00
/*
* Copyright (C) 2010 Broadcom
*/
#include <linux/init.h>
irqchip: bcm2835: Convert to use IRQCHIP_DECLARE macro This patch converts irq-bcm2835 driver to use the new IRQCHIP_DECLARE and irqchip_init. Signed-off-by: Axel Lin <axel.lin@ingics.com> Tested-by: Stephen Warren <swarren@wwwdotorg.org> Cc: Simon Arlott <simon@fire.lp0.eu> Cc: Olof Johansson <olof@lixom.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: linux-rpi-kernel@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-07-04 23:31:36 +07:00
#include <linux/irqchip.h>
ARM: bcm2835: implement machine restart hook Implement the machine restart hook using the SoC's watchdog timer module. To support this, define a DT binding for the watchdog module, and add it to the device tree. The downstream rpi-split branch contains a full watchdog timer driver implementation, which also implements the restart hook. However, the restart function is largely separate from the watchdog driver, so for simplicity, the restart hook is implemented here directly in the main machine source file. Overall structure (separate setup/restart) functions derived from the picoxcell ARM support. Watchdog register IO sequence taken from code by Simon Arlott. Note that the watchdog module is not documented in BCM2835-ARM-Peripherals.pdf. Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
2012-09-16 11:18:10 +07:00
#include <linux/of_address.h>
ARM: add infra-structure for BCM2835 and Raspberry Pi The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC. http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note that the documentation in the latter .pdf assumes the MMU setup that's used on the "VideoCore" companion processor, and does not document physical peripheral addresses. Subtract 0x5e000000 to obtain the physical addresses. This is accounted for by the ranges property in the /soc node in the device tree. The BCM2835 SoC is used in the Raspberry Pi. This patch also adds a minimal device tree for this board; enough to see some very early kernel boot messages through earlyprintk. However, this patch does not yet provide a useful booting system. http://www.raspberrypi.org/. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split from 3-4 months ago, and significantly stripped down and modified since. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 14:04:43 +07:00
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
irqchip: bcm2836: Move SMP startup code to arch/arm (v2) In order to easily provide SMP for BCM2837 on 32-bit and 64-bit the SMP startup code was placed in irq-bcm2836. That's not the right approach. So move this code where it belongs. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836") Tested-by: Eric Anholt <eric@anholt.net> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-06 22:52:02 +07:00
#include "platsmp.h"
ARM: add infra-structure for BCM2835 and Raspberry Pi The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC. http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note that the documentation in the latter .pdf assumes the MMU setup that's used on the "VideoCore" companion processor, and does not document physical peripheral addresses. Subtract 0x5e000000 to obtain the physical addresses. This is accounted for by the ranges property in the /soc node in the device tree. The BCM2835 SoC is used in the Raspberry Pi. This patch also adds a minimal device tree for this board; enough to see some very early kernel boot messages through earlyprintk. However, this patch does not yet provide a useful booting system. http://www.raspberrypi.org/. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split from 3-4 months ago, and significantly stripped down and modified since. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 14:04:43 +07:00
static const char * const bcm2835_compat[] = {
ARM: bcm2835: Add a compat string for bcm2836 machine probe Supporting the 2836 requires using the new interrupt controller, which we have support for. Signed-off-by: Eric Anholt <eric@anholt.net>
2015-12-17 06:55:14 +07:00
#ifdef CONFIG_ARCH_MULTI_V6
ARM: add infra-structure for BCM2835 and Raspberry Pi The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC. http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note that the documentation in the latter .pdf assumes the MMU setup that's used on the "VideoCore" companion processor, and does not document physical peripheral addresses. Subtract 0x5e000000 to obtain the physical addresses. This is accounted for by the ranges property in the /soc node in the device tree. The BCM2835 SoC is used in the Raspberry Pi. This patch also adds a minimal device tree for this board; enough to see some very early kernel boot messages through earlyprintk. However, this patch does not yet provide a useful booting system. http://www.raspberrypi.org/. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split from 3-4 months ago, and significantly stripped down and modified since. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 14:04:43 +07:00
"brcm,bcm2835",
ARM: bcm2835: Add a compat string for bcm2836 machine probe Supporting the 2836 requires using the new interrupt controller, which we have support for. Signed-off-by: Eric Anholt <eric@anholt.net>
2015-12-17 06:55:14 +07:00
#endif
#ifdef CONFIG_ARCH_MULTI_V7
"brcm,bcm2836",
irqchip: bcm2836: Move SMP startup code to arch/arm (v2) In order to easily provide SMP for BCM2837 on 32-bit and 64-bit the SMP startup code was placed in irq-bcm2836. That's not the right approach. So move this code where it belongs. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836") Tested-by: Eric Anholt <eric@anholt.net> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-06 22:52:02 +07:00
"brcm,bcm2837",
ARM: bcm2835: Add a compat string for bcm2836 machine probe Supporting the 2836 requires using the new interrupt controller, which we have support for. Signed-off-by: Eric Anholt <eric@anholt.net>
2015-12-17 06:55:14 +07:00
#endif
ARM: add infra-structure for BCM2835 and Raspberry Pi The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC. http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note that the documentation in the latter .pdf assumes the MMU setup that's used on the "VideoCore" companion processor, and does not document physical peripheral addresses. Subtract 0x5e000000 to obtain the physical addresses. This is accounted for by the ranges property in the /soc node in the device tree. The BCM2835 SoC is used in the Raspberry Pi. This patch also adds a minimal device tree for this board; enough to see some very early kernel boot messages through earlyprintk. However, this patch does not yet provide a useful booting system. http://www.raspberrypi.org/. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split from 3-4 months ago, and significantly stripped down and modified since. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 14:04:43 +07:00
NULL
};
DT_MACHINE_START(BCM2835, "BCM2835")
irqchip: bcm2836: Move SMP startup code to arch/arm (v2) In order to easily provide SMP for BCM2837 on 32-bit and 64-bit the SMP startup code was placed in irq-bcm2836. That's not the right approach. So move this code where it belongs. Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Fixes: 41f4988cc287 ("irqchip/bcm2836: Add SMP support for the 2836") Tested-by: Eric Anholt <eric@anholt.net> Acked-by: Marc Zyngier <marc.zyngier@arm.com>
2017-08-06 22:52:02 +07:00
.dt_compat = bcm2835_compat,
.smp = smp_ops(bcm2836_smp_ops),
ARM: add infra-structure for BCM2835 and Raspberry Pi The BCM2835 is an ARM SoC from Broadcom. This patch adds very basic support for this SoC. http://www.broadcom.com/products/BCM2835 http://www.raspberrypi.org/wp-content/uploads/2012/02/BCM2835-ARM-Peripherals.pdf Note that the documentation in the latter .pdf assumes the MMU setup that's used on the "VideoCore" companion processor, and does not document physical peripheral addresses. Subtract 0x5e000000 to obtain the physical addresses. This is accounted for by the ranges property in the /soc node in the device tree. The BCM2835 SoC is used in the Raspberry Pi. This patch also adds a minimal device tree for this board; enough to see some very early kernel boot messages through earlyprintk. However, this patch does not yet provide a useful booting system. http://www.raspberrypi.org/. This patch was extracted from git://github.com/lp0/linux.git branch rpi-split from 3-4 months ago, and significantly stripped down and modified since. Signed-off-by: Chris Boot <bootc@bootc.net> Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Dom Cobley <popcornmix@gmail.com> Signed-off-by: Dom Cobley <dc4@broadcom.com> Signed-off-by: Stephen Warren <swarren@wwwdotorg.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2012-05-26 14:04:43 +07:00
MACHINE_END
Reference in New Issue Copy Permalink