linux_dsm_epyc7002/drivers/gpu/drm/i915/i915_gem_gtt.c

3821 lines
99 KiB
C
Raw Normal View History

/*
* Copyright © 2010 Daniel Vetter
* Copyright © 2011-2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*
*/
#include <linux/slab.h> /* fault-inject.h is not standalone! */
#include <linux/fault-inject.h>
#include <linux/log2.h>
drm/i915: Prefer random replacement before eviction search Performing an eviction search can be very, very slow especially for a range restricted replacement. For example, a workload like gem_concurrent_blit will populate the entire GTT and then cause aperture thrashing. Since the GTT is a mix of active and inactive tiny objects, we have to search through almost 400k objects before finding anything inside the mappable region, and as this search is required before every operation performance falls off a cliff. Instead of performing the full search, we do a trial replacement of the node at a random location fitting the specified restrictions. We lose the strict LRU property of the GTT in exchange for avoiding the slow search (several orders of runtime improvement for gem_concurrent_blit 4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is (later) mitigated firstly by only doing replacement if we find no freespace and secondly by execbuf doing a PIN_NONBLOCK search first before it starts thrashing (i.e. the random replacement will only occur from the already inactive set of objects). v2: Ascii-art, and check preconditionst v3: Rephrase final sentence in comment to explain why we don't bother with if (i915_is_ggtt(vm)) for preferring random replacement. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
2017-01-11 18:23:12 +07:00
#include <linux/random.h>
#include <linux/seq_file.h>
#include <linux/stop_machine.h>
#include <asm/set_memory.h>
#include <asm/smp.h>
#include <drm/i915_drm.h>
#include "display/intel_frontbuffer.h"
#include "gt/intel_gt.h"
#include "i915_drv.h"
#include "i915_scatterlist.h"
#include "i915_trace.h"
#include "i915_vgpu.h"
#define I915_GFP_ALLOW_FAIL (GFP_KERNEL | __GFP_RETRY_MAYFAIL | __GFP_NOWARN)
#if IS_ENABLED(CONFIG_DRM_I915_TRACE_GTT)
#define DBG(...) trace_printk(__VA_ARGS__)
#else
#define DBG(...)
#endif
/**
* DOC: Global GTT views
*
* Background and previous state
*
* Historically objects could exists (be bound) in global GTT space only as
* singular instances with a view representing all of the object's backing pages
* in a linear fashion. This view will be called a normal view.
*
* To support multiple views of the same object, where the number of mapped
* pages is not equal to the backing store, or where the layout of the pages
* is not linear, concept of a GGTT view was added.
*
* One example of an alternative view is a stereo display driven by a single
* image. In this case we would have a framebuffer looking like this
* (2x2 pages):
*
* 12
* 34
*
* Above would represent a normal GGTT view as normally mapped for GPU or CPU
* rendering. In contrast, fed to the display engine would be an alternative
* view which could look something like this:
*
* 1212
* 3434
*
* In this example both the size and layout of pages in the alternative view is
* different from the normal view.
*
* Implementation and usage
*
* GGTT views are implemented using VMAs and are distinguished via enum
* i915_ggtt_view_type and struct i915_ggtt_view.
*
* A new flavour of core GEM functions which work with GGTT bound objects were
* added with the _ggtt_ infix, and sometimes with _view postfix to avoid
* renaming in large amounts of code. They take the struct i915_ggtt_view
* parameter encapsulating all metadata required to implement a view.
*
* As a helper for callers which are only interested in the normal view,
* globally const i915_ggtt_view_normal singleton instance exists. All old core
* GEM API functions, the ones not taking the view parameter, are operating on,
* or with the normal GGTT view.
*
* Code wanting to add or use a new GGTT view needs to:
*
* 1. Add a new enum with a suitable name.
* 2. Extend the metadata in the i915_ggtt_view structure if required.
* 3. Add support to i915_get_vma_pages().
*
* New views are required to build a scatter-gather table from within the
* i915_get_vma_pages function. This table is stored in the vma.ggtt_view and
* exists for the lifetime of an VMA.
*
* Core API is designed to have copy semantics which means that passed in
* struct i915_ggtt_view does not need to be persistent (left around after
* calling the core API functions).
*
*/
#define as_pd(x) container_of((x), typeof(struct i915_page_directory), pt)
static int
i915_get_ggtt_vma_pages(struct i915_vma *vma);
static void gen6_ggtt_invalidate(struct i915_ggtt *ggtt)
{
struct intel_uncore *uncore = ggtt->vm.gt->uncore;
/*
* Note that as an uncached mmio write, this will flush the
* WCB of the writes into the GGTT before it triggers the invalidate.
*/
intel_uncore_write_fw(uncore, GFX_FLSH_CNTL_GEN6, GFX_FLSH_CNTL_EN);
}
static void guc_ggtt_invalidate(struct i915_ggtt *ggtt)
{
struct intel_uncore *uncore = ggtt->vm.gt->uncore;
struct drm_i915_private *i915 = ggtt->vm.i915;
gen6_ggtt_invalidate(ggtt);
if (INTEL_GEN(i915) >= 12)
intel_uncore_write_fw(uncore, GEN12_GUC_TLB_INV_CR,
GEN12_GUC_TLB_INV_CR_INVALIDATE);
else
intel_uncore_write_fw(uncore, GEN8_GTCR, GEN8_GTCR_INVALIDATE);
}
static void gmch_ggtt_invalidate(struct i915_ggtt *ggtt)
{
intel_gtt_chipset_flush();
}
static int ppgtt_bind_vma(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 unused)
{
u32 pte_flags;
int err;
if (!i915_vma_is_bound(vma, I915_VMA_LOCAL_BIND)) {
err = vma->vm->allocate_va_range(vma->vm,
vma->node.start, vma->size);
if (err)
return err;
}
/* Applicable to VLV, and gen8+ */
pte_flags = 0;
if (i915_gem_object_is_readonly(vma->obj))
pte_flags |= PTE_READ_ONLY;
vma->vm->insert_entries(vma->vm, vma, cache_level, pte_flags);
wmb();
return 0;
}
static void ppgtt_unbind_vma(struct i915_vma *vma)
{
vma->vm->clear_range(vma->vm, vma->node.start, vma->size);
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 05:10:56 +07:00
static int ppgtt_set_pages(struct i915_vma *vma)
{
GEM_BUG_ON(vma->pages);
vma->pages = vma->obj->mm.pages;
vma->page_sizes = vma->obj->mm.page_sizes;
return 0;
}
static void clear_pages(struct i915_vma *vma)
{
GEM_BUG_ON(!vma->pages);
if (vma->pages != vma->obj->mm.pages) {
sg_free_table(vma->pages);
kfree(vma->pages);
}
vma->pages = NULL;
memset(&vma->page_sizes, 0, sizeof(vma->page_sizes));
}
static u64 gen8_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
gen8_pte_t pte = addr | _PAGE_PRESENT | _PAGE_RW;
if (unlikely(flags & PTE_READ_ONLY))
pte &= ~_PAGE_RW;
switch (level) {
case I915_CACHE_NONE:
pte |= PPAT_UNCACHED;
break;
case I915_CACHE_WT:
pte |= PPAT_DISPLAY_ELLC;
break;
default:
pte |= PPAT_CACHED;
break;
}
return pte;
}
static u64 gen8_pde_encode(const dma_addr_t addr,
const enum i915_cache_level level)
{
u64 pde = _PAGE_PRESENT | _PAGE_RW;
pde |= addr;
if (level != I915_CACHE_NONE)
pde |= PPAT_CACHED_PDE;
else
pde |= PPAT_UNCACHED;
return pde;
}
static u64 snb_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
gen6_pte_t pte = GEN6_PTE_VALID;
pte |= GEN6_PTE_ADDR_ENCODE(addr);
switch (level) {
case I915_CACHE_L3_LLC:
case I915_CACHE_LLC:
pte |= GEN6_PTE_CACHE_LLC;
break;
case I915_CACHE_NONE:
pte |= GEN6_PTE_UNCACHED;
break;
default:
drm/i915: Use BUILD_BUG if possible in the i915 WARN_ON Faster feedback to errors is always better. This is inspired by the addition to WARN_ONs to mask/enable helpers for registers to make sure callers have the arguments ordered correctly: Pretty much always the arguments are static. We use WARN_ON(1) a lot in default switch statements though where we should always handle all cases. So add a new macro specifically for that. The idea to use __builtin_constant_p is from Chris Wilson. v2: Use the ({}) gcc-ism to avoid the static inline, suggested by Dave. My first attempt used __cond as the temp var, which is the same used by BUILD_BUG_ON, but with inverted sense. Hilarity ensued, so sprinkle i915 into the name. Also use a temporary variable to only evaluate the condition once, suggested by Damien. v3: It's crazy but apparently 32bit gcc can't compile out the BUILD_BUG_ON in a lot of cases and just falls over. I have no idea why, but until clue grows just disable this nifty idea on 32bit builds. Reported by 0-day builder. v4: Got it all wrong, apparently its the gcc version. We need 4.9+. Now reported by Imre. v5: Chris suggested to add the case to MISSING_CASE for speedier debug. v6: Even some gcc 4.9 versions don't see through the maze, so give up for now. Keep the skeleton and MISSING_CASE stuff though. Cc: Imre Deak <imre.deak@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-12-08 22:40:10 +07:00
MISSING_CASE(level);
}
return pte;
}
static u64 ivb_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
gen6_pte_t pte = GEN6_PTE_VALID;
pte |= GEN6_PTE_ADDR_ENCODE(addr);
switch (level) {
case I915_CACHE_L3_LLC:
pte |= GEN7_PTE_CACHE_L3_LLC;
break;
case I915_CACHE_LLC:
pte |= GEN6_PTE_CACHE_LLC;
break;
case I915_CACHE_NONE:
pte |= GEN6_PTE_UNCACHED;
break;
default:
drm/i915: Use BUILD_BUG if possible in the i915 WARN_ON Faster feedback to errors is always better. This is inspired by the addition to WARN_ONs to mask/enable helpers for registers to make sure callers have the arguments ordered correctly: Pretty much always the arguments are static. We use WARN_ON(1) a lot in default switch statements though where we should always handle all cases. So add a new macro specifically for that. The idea to use __builtin_constant_p is from Chris Wilson. v2: Use the ({}) gcc-ism to avoid the static inline, suggested by Dave. My first attempt used __cond as the temp var, which is the same used by BUILD_BUG_ON, but with inverted sense. Hilarity ensued, so sprinkle i915 into the name. Also use a temporary variable to only evaluate the condition once, suggested by Damien. v3: It's crazy but apparently 32bit gcc can't compile out the BUILD_BUG_ON in a lot of cases and just falls over. I have no idea why, but until clue grows just disable this nifty idea on 32bit builds. Reported by 0-day builder. v4: Got it all wrong, apparently its the gcc version. We need 4.9+. Now reported by Imre. v5: Chris suggested to add the case to MISSING_CASE for speedier debug. v6: Even some gcc 4.9 versions don't see through the maze, so give up for now. Keep the skeleton and MISSING_CASE stuff though. Cc: Imre Deak <imre.deak@intel.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Dave Gordon <david.s.gordon@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2014-12-08 22:40:10 +07:00
MISSING_CASE(level);
}
return pte;
}
static u64 byt_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
gen6_pte_t pte = GEN6_PTE_VALID;
pte |= GEN6_PTE_ADDR_ENCODE(addr);
if (!(flags & PTE_READ_ONLY))
pte |= BYT_PTE_WRITEABLE;
if (level != I915_CACHE_NONE)
pte |= BYT_PTE_SNOOPED_BY_CPU_CACHES;
return pte;
}
static u64 hsw_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
gen6_pte_t pte = GEN6_PTE_VALID;
pte |= HSW_PTE_ADDR_ENCODE(addr);
if (level != I915_CACHE_NONE)
drm/i915/hsw: Change default LLC age to 3 The default LLC age was changed: commit 0d8ff15e9a15f2b393e53337a107b7a1e5919b6d Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Thu Jul 4 11:02:03 2013 -0700 drm/i915/hsw: Set correct Haswell PTE encodings. On the surface it would seem setting a default age wouldn't matter because all GEM BOs are aged similarly, so the order in which objects are evicted would not be subject to aging. The current working theory as to why this caused a regression though is that LLC is a bit special in that it is shared with the CPU. Presumably (not verified) the CPU fetches cachelines with age 3, and therefore recently cached GPU objects would be evicted before similar CPU object first when the LLC is full. It stands to reason therefore that this would negatively impact CPU bound benchmarks - but those seem to be low on the priority list. eLLC OTOH does not have this same property as LLC. It should be used entirely for the GPU, and so the age really shouldn't matter. Furthermore, we have no evidence to suggest one is better than another on eLLC. Since we've never properly supported eLLC before no, there should be no regression. If the GPU client really wants "younger" objects, they should use MOCS. v2: Drop the extra #define (Chad) v3: Actually git add v4: Pimped commit message Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=67062 Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Chad Versace <chad.versace@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-08-05 13:47:29 +07:00
pte |= HSW_WB_LLC_AGE3;
return pte;
}
static u64 iris_pte_encode(dma_addr_t addr,
enum i915_cache_level level,
u32 flags)
{
gen6_pte_t pte = GEN6_PTE_VALID;
pte |= HSW_PTE_ADDR_ENCODE(addr);
switch (level) {
case I915_CACHE_NONE:
break;
case I915_CACHE_WT:
pte |= HSW_WT_ELLC_LLC_AGE3;
break;
default:
pte |= HSW_WB_ELLC_LLC_AGE3;
break;
}
return pte;
}
static void stash_init(struct pagestash *stash)
{
pagevec_init(&stash->pvec);
spin_lock_init(&stash->lock);
}
static struct page *stash_pop_page(struct pagestash *stash)
{
struct page *page = NULL;
spin_lock(&stash->lock);
if (likely(stash->pvec.nr))
page = stash->pvec.pages[--stash->pvec.nr];
spin_unlock(&stash->lock);
return page;
}
static void stash_push_pagevec(struct pagestash *stash, struct pagevec *pvec)
{
unsigned int nr;
spin_lock_nested(&stash->lock, SINGLE_DEPTH_NESTING);
nr = min_t(typeof(nr), pvec->nr, pagevec_space(&stash->pvec));
memcpy(stash->pvec.pages + stash->pvec.nr,
pvec->pages + pvec->nr - nr,
sizeof(pvec->pages[0]) * nr);
stash->pvec.nr += nr;
spin_unlock(&stash->lock);
pvec->nr -= nr;
}
static struct page *vm_alloc_page(struct i915_address_space *vm, gfp_t gfp)
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
{
struct pagevec stack;
struct page *page;
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
if (I915_SELFTEST_ONLY(should_fail(&vm->fault_attr, 1)))
i915_gem_shrink_all(vm->i915);
page = stash_pop_page(&vm->free_pages);
if (page)
return page;
if (!vm->pt_kmap_wc)
return alloc_page(gfp);
/* Look in our global stash of WC pages... */
page = stash_pop_page(&vm->i915->mm.wc_stash);
if (page)
return page;
/*
* Otherwise batch allocate pages to amortize cost of set_pages_wc.
*
* We have to be careful as page allocation may trigger the shrinker
* (via direct reclaim) which will fill up the WC stash underneath us.
* So we add our WB pages into a temporary pvec on the stack and merge
* them into the WC stash after all the allocations are complete.
*/
pagevec_init(&stack);
do {
struct page *page;
page = alloc_page(gfp);
if (unlikely(!page))
break;
stack.pages[stack.nr++] = page;
} while (pagevec_space(&stack));
if (stack.nr && !set_pages_array_wc(stack.pages, stack.nr)) {
page = stack.pages[--stack.nr];
/* Merge spare WC pages to the global stash */
if (stack.nr)
stash_push_pagevec(&vm->i915->mm.wc_stash, &stack);
/* Push any surplus WC pages onto the local VM stash */
if (stack.nr)
stash_push_pagevec(&vm->free_pages, &stack);
}
/* Return unwanted leftovers */
if (unlikely(stack.nr)) {
WARN_ON_ONCE(set_pages_array_wb(stack.pages, stack.nr));
__pagevec_release(&stack);
}
return page;
}
static void vm_free_pages_release(struct i915_address_space *vm,
bool immediate)
{
struct pagevec *pvec = &vm->free_pages.pvec;
struct pagevec stack;
lockdep_assert_held(&vm->free_pages.lock);
GEM_BUG_ON(!pagevec_count(pvec));
if (vm->pt_kmap_wc) {
/*
* When we use WC, first fill up the global stash and then
* only if full immediately free the overflow.
*/
stash_push_pagevec(&vm->i915->mm.wc_stash, pvec);
/*
* As we have made some room in the VM's free_pages,
* we can wait for it to fill again. Unless we are
* inside i915_address_space_fini() and must
* immediately release the pages!
*/
if (pvec->nr <= (immediate ? 0 : PAGEVEC_SIZE - 1))
return;
/*
* We have to drop the lock to allow ourselves to sleep,
* so take a copy of the pvec and clear the stash for
* others to use it as we sleep.
*/
stack = *pvec;
pagevec_reinit(pvec);
spin_unlock(&vm->free_pages.lock);
pvec = &stack;
set_pages_array_wb(pvec->pages, pvec->nr);
spin_lock(&vm->free_pages.lock);
}
__pagevec_release(pvec);
}
static void vm_free_page(struct i915_address_space *vm, struct page *page)
{
/*
* On !llc, we need to change the pages back to WB. We only do so
* in bulk, so we rarely need to change the page attributes here,
* but doing so requires a stop_machine() from deep inside arch/x86/mm.
* To make detection of the possible sleep more likely, use an
* unconditional might_sleep() for everybody.
*/
might_sleep();
spin_lock(&vm->free_pages.lock);
while (!pagevec_space(&vm->free_pages.pvec))
vm_free_pages_release(vm, false);
GEM_BUG_ON(pagevec_count(&vm->free_pages.pvec) >= PAGEVEC_SIZE);
pagevec_add(&vm->free_pages.pvec, page);
spin_unlock(&vm->free_pages.lock);
}
static void i915_address_space_fini(struct i915_address_space *vm)
{
spin_lock(&vm->free_pages.lock);
if (pagevec_count(&vm->free_pages.pvec))
vm_free_pages_release(vm, true);
GEM_BUG_ON(pagevec_count(&vm->free_pages.pvec));
spin_unlock(&vm->free_pages.lock);
drm_mm_takedown(&vm->mm);
mutex_destroy(&vm->mutex);
}
static void ppgtt_destroy_vma(struct i915_address_space *vm)
{
struct list_head *phases[] = {
&vm->bound_list,
&vm->unbound_list,
NULL,
}, **phase;
mutex_lock(&vm->i915->drm.struct_mutex);
for (phase = phases; *phase; phase++) {
struct i915_vma *vma, *vn;
list_for_each_entry_safe(vma, vn, *phase, vm_link)
i915_vma_destroy(vma);
}
mutex_unlock(&vm->i915->drm.struct_mutex);
}
static void __i915_vm_release(struct work_struct *work)
{
struct i915_address_space *vm =
container_of(work, struct i915_address_space, rcu.work);
ppgtt_destroy_vma(vm);
GEM_BUG_ON(!list_empty(&vm->bound_list));
GEM_BUG_ON(!list_empty(&vm->unbound_list));
vm->cleanup(vm);
i915_address_space_fini(vm);
kfree(vm);
}
void i915_vm_release(struct kref *kref)
{
struct i915_address_space *vm =
container_of(kref, struct i915_address_space, ref);
GEM_BUG_ON(i915_is_ggtt(vm));
trace_i915_ppgtt_release(vm);
vm->closed = true;
queue_rcu_work(vm->i915->wq, &vm->rcu);
}
static void i915_address_space_init(struct i915_address_space *vm, int subclass)
{
kref_init(&vm->ref);
INIT_RCU_WORK(&vm->rcu, __i915_vm_release);
/*
* The vm->mutex must be reclaim safe (for use in the shrinker).
* Do a dummy acquire now under fs_reclaim so that any allocation
* attempt holding the lock is immediately reported by lockdep.
*/
mutex_init(&vm->mutex);
lockdep_set_subclass(&vm->mutex, subclass);
drm/i915: Return immediately if trylock fails for direct-reclaim Ignore trying to shrink from i915 if we fail to acquire the struct_mutex in the shrinker while performing direct-reclaim. The trade-off being (much) lower latency for non-i915 clients at an increased risk of being unable to obtain a page from direct-reclaim without hitting the oom-notifier. The proviso being that we still keep trying to hard obtain the lock for kswapd so that we can reap under heavy memory pressure. v2: Taint all mutexes taken within the shrinker with the struct_mutex subclass as an early warning system, and drop I915_SHRINK_ACTIVE from vmap to reduce the number of dangerous paths. We also have to drop I915_SHRINK_ACTIVE from oom-notifier to be able to make the same claim that ACTIVE is only used from outside context, which fits in with a longer strategy of avoiding stalls due to scanning active during shrinking. The danger in using the subclass struct_mutex is that we declare ourselves more knowledgable than lockdep and deprive ourselves of automatic coverage. Instead, we require ourselves to mark up any mutex taken inside the shrinker in order to detect lock-inversion, and if we miss any we are doomed to a deadlock at the worst possible moment. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-1-chris@chris-wilson.co.uk
2019-01-07 18:54:24 +07:00
i915_gem_shrinker_taints_mutex(vm->i915, &vm->mutex);
GEM_BUG_ON(!vm->total);
drm_mm_init(&vm->mm, 0, vm->total);
vm->mm.head_node.color = I915_COLOR_UNEVICTABLE;
stash_init(&vm->free_pages);
INIT_LIST_HEAD(&vm->unbound_list);
drm/i915: Stop tracking MRU activity on VMA Our goal is to remove struct_mutex and replace it with fine grained locking. One of the thorny issues is our eviction logic for reclaiming space for an execbuffer (or GTT mmaping, among a few other examples). While eviction itself is easy to move under a per-VM mutex, performing the activity tracking is less agreeable. One solution is not to do any MRU tracking and do a simple coarse evaluation during eviction of active/inactive, with a loose temporal ordering of last insertion/evaluation. That keeps all the locking constrained to when we are manipulating the VM itself, neatly avoiding the tricky handling of possible recursive locking during execbuf and elsewhere. Note that discarding the MRU (currently implemented as a pair of lists, to avoid scanning the active list for a NONBLOCKING search) is unlikely to impact upon our efficiency to reclaim VM space (where we think a LRU model is best) as our current strategy is to use random idle replacement first before doing a search, and over time the use of softpinned 48b per-ppGTT is growing (thereby eliminating any need to perform any eviction searches, in theory at least) with the remaining users being found on much older devices (gen2-gen6). v2: Changelog and commentary rewritten to elaborate on the duality of a single list being both an inactive and active list. v3: Consolidate bool parameters into a single set of flags; don't comment on the duality of a single variable being a multiplicity of bits. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-1-chris@chris-wilson.co.uk
2019-01-28 17:23:52 +07:00
INIT_LIST_HEAD(&vm->bound_list);
}
static int __setup_page_dma(struct i915_address_space *vm,
struct i915_page_dma *p,
gfp_t gfp)
{
p->page = vm_alloc_page(vm, gfp | I915_GFP_ALLOW_FAIL);
if (unlikely(!p->page))
return -ENOMEM;
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
p->daddr = dma_map_page_attrs(vm->dma,
p->page, 0, PAGE_SIZE,
PCI_DMA_BIDIRECTIONAL,
DMA_ATTR_SKIP_CPU_SYNC |
DMA_ATTR_NO_WARN);
if (unlikely(dma_mapping_error(vm->dma, p->daddr))) {
vm_free_page(vm, p->page);
return -ENOMEM;
}
return 0;
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
}
static int setup_page_dma(struct i915_address_space *vm,
struct i915_page_dma *p)
{
return __setup_page_dma(vm, p, __GFP_HIGHMEM);
}
static void cleanup_page_dma(struct i915_address_space *vm,
struct i915_page_dma *p)
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
{
dma_unmap_page(vm->dma, p->daddr, PAGE_SIZE, PCI_DMA_BIDIRECTIONAL);
vm_free_page(vm, p->page);
}
#define kmap_atomic_px(px) kmap_atomic(px_base(px)->page)
static void
fill_page_dma(const struct i915_page_dma *p, const u64 val, unsigned int count)
{
kunmap_atomic(memset64(kmap_atomic(p->page), val, count));
}
#define fill_px(px, v) fill_page_dma(px_base(px), (v), PAGE_SIZE / sizeof(u64))
#define fill32_px(px, v) do { \
u64 v__ = lower_32_bits(v); \
fill_px((px), v__ << 32 | v__); \
} while (0)
static int
setup_scratch_page(struct i915_address_space *vm, gfp_t gfp)
{
unsigned long size;
/*
* In order to utilize 64K pages for an object with a size < 2M, we will
* need to support a 64K scratch page, given that every 16th entry for a
* page-table operating in 64K mode must point to a properly aligned 64K
* region, including any PTEs which happen to point to scratch.
*
* This is only relevant for the 48b PPGTT where we support
* huge-gtt-pages, see also i915_vma_insert(). However, as we share the
* scratch (read-only) between all vm, we create one 64k scratch page
* for all.
*/
size = I915_GTT_PAGE_SIZE_4K;
if (i915_vm_is_4lvl(vm) &&
HAS_PAGE_SIZES(vm->i915, I915_GTT_PAGE_SIZE_64K)) {
size = I915_GTT_PAGE_SIZE_64K;
gfp |= __GFP_NOWARN;
}
gfp |= __GFP_ZERO | __GFP_RETRY_MAYFAIL;
do {
unsigned int order = get_order(size);
struct page *page;
dma_addr_t addr;
page = alloc_pages(gfp, order);
if (unlikely(!page))
goto skip;
addr = dma_map_page_attrs(vm->dma,
page, 0, size,
PCI_DMA_BIDIRECTIONAL,
DMA_ATTR_SKIP_CPU_SYNC |
DMA_ATTR_NO_WARN);
if (unlikely(dma_mapping_error(vm->dma, addr)))
goto free_page;
if (unlikely(!IS_ALIGNED(addr, size)))
goto unmap_page;
vm->scratch[0].base.page = page;
vm->scratch[0].base.daddr = addr;
vm->scratch_order = order;
return 0;
unmap_page:
dma_unmap_page(vm->dma, addr, size, PCI_DMA_BIDIRECTIONAL);
free_page:
__free_pages(page, order);
skip:
if (size == I915_GTT_PAGE_SIZE_4K)
return -ENOMEM;
size = I915_GTT_PAGE_SIZE_4K;
gfp &= ~__GFP_NOWARN;
} while (1);
}
static void cleanup_scratch_page(struct i915_address_space *vm)
{
struct i915_page_dma *p = px_base(&vm->scratch[0]);
unsigned int order = vm->scratch_order;
dma_unmap_page(vm->dma, p->daddr, BIT(order) << PAGE_SHIFT,
PCI_DMA_BIDIRECTIONAL);
__free_pages(p->page, order);
}
static void free_scratch(struct i915_address_space *vm)
{
int i;
if (!px_dma(&vm->scratch[0])) /* set to 0 on clones */
return;
for (i = 1; i <= vm->top; i++) {
if (!px_dma(&vm->scratch[i]))
break;
cleanup_page_dma(vm, px_base(&vm->scratch[i]));
}
cleanup_scratch_page(vm);
}
static struct i915_page_table *alloc_pt(struct i915_address_space *vm)
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
{
struct i915_page_table *pt;
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
pt = kmalloc(sizeof(*pt), I915_GFP_ALLOW_FAIL);
if (unlikely(!pt))
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
return ERR_PTR(-ENOMEM);
if (unlikely(setup_page_dma(vm, &pt->base))) {
kfree(pt);
return ERR_PTR(-ENOMEM);
}
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
atomic_set(&pt->used, 0);
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
return pt;
}
static struct i915_page_directory *__alloc_pd(size_t sz)
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
{
struct i915_page_directory *pd;
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
pd = kzalloc(sz, I915_GFP_ALLOW_FAIL);
if (unlikely(!pd))
return NULL;
spin_lock_init(&pd->lock);
return pd;
}
static struct i915_page_directory *alloc_pd(struct i915_address_space *vm)
{
struct i915_page_directory *pd;
pd = __alloc_pd(sizeof(*pd));
if (unlikely(!pd))
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
return ERR_PTR(-ENOMEM);
if (unlikely(setup_page_dma(vm, px_base(pd)))) {
kfree(pd);
return ERR_PTR(-ENOMEM);
}
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
return pd;
}
static void free_pd(struct i915_address_space *vm, struct i915_page_dma *pd)
{
cleanup_page_dma(vm, pd);
kfree(pd);
}
#define free_px(vm, px) free_pd(vm, px_base(px))
static inline void
write_dma_entry(struct i915_page_dma * const pdma,
const unsigned short idx,
const u64 encoded_entry)
{
u64 * const vaddr = kmap_atomic(pdma->page);
vaddr[idx] = encoded_entry;
kunmap_atomic(vaddr);
}
static inline void
__set_pd_entry(struct i915_page_directory * const pd,
const unsigned short idx,
struct i915_page_dma * const to,
u64 (*encode)(const dma_addr_t, const enum i915_cache_level))
{
/* Each thread pre-pins the pd, and we may have a thread per pde. */
GEM_BUG_ON(atomic_read(px_used(pd)) > 2 * ARRAY_SIZE(pd->entry));
atomic_inc(px_used(pd));
pd->entry[idx] = to;
write_dma_entry(px_base(pd), idx, encode(to->daddr, I915_CACHE_LLC));
drm/i915/gen8: Make pdp allocation more dynamic This transitional patch doesn't do much for the existing code. However, it should make upcoming patches to use the full 48b address space a bit easier. 32-bit ppgtt uses just 4 PDPs, while 48-bit ppgtt will have up-to 512; this patch prepares the existing functions to query the right number of pdps at run-time. This also means that used_pdpes should also be allocated during ppgtt_init, as the bitmap size will depend on the ppgtt address range selected. v2: Renamed pdp_free to be similar to pd/pt (unmap_and_free_pdp). v3: To facilitate testing, 48b mode will be available on Broadwell and GEN9+, when i915.enable_ppgtt = 3. v4: Rebase after s/page_tables/page_table/, added extra information about 4-level page table formats and use IS_ENABLED macro. v5: Check CONFIG_X86_64 instead of CONFIG_64BIT. v6: Rebase after Mika's ppgtt cleanup / scratch merge patch series, and follow his nomenclature in pdp functions (there is no alloc_pdp yet). v7: Rebase after merged version of Mika's ppgtt cleanup patch series. v8: Rebase after final merged version of Mika's ppgtt/scratch patches. v9: Introduce PML4 (and 48-bit checks) until next patch (Akash). v10: Also use test_bit to detect when pd/pt are already allocated (Akash) Cc: Akash Goel <akash.goel@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Akash Goel <akash.goel@intel.com> [danvet: Amend commit message as suggested by Michel.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-29 23:23:46 +07:00
}
#define set_pd_entry(pd, idx, to) \
__set_pd_entry((pd), (idx), px_base(to), gen8_pde_encode)
static inline void
clear_pd_entry(struct i915_page_directory * const pd,
const unsigned short idx,
const struct i915_page_scratch * const scratch)
{
GEM_BUG_ON(atomic_read(px_used(pd)) == 0);
write_dma_entry(px_base(pd), idx, scratch->encode);
pd->entry[idx] = NULL;
atomic_dec(px_used(pd));
drm/i915/gen8: Make pdp allocation more dynamic This transitional patch doesn't do much for the existing code. However, it should make upcoming patches to use the full 48b address space a bit easier. 32-bit ppgtt uses just 4 PDPs, while 48-bit ppgtt will have up-to 512; this patch prepares the existing functions to query the right number of pdps at run-time. This also means that used_pdpes should also be allocated during ppgtt_init, as the bitmap size will depend on the ppgtt address range selected. v2: Renamed pdp_free to be similar to pd/pt (unmap_and_free_pdp). v3: To facilitate testing, 48b mode will be available on Broadwell and GEN9+, when i915.enable_ppgtt = 3. v4: Rebase after s/page_tables/page_table/, added extra information about 4-level page table formats and use IS_ENABLED macro. v5: Check CONFIG_X86_64 instead of CONFIG_64BIT. v6: Rebase after Mika's ppgtt cleanup / scratch merge patch series, and follow his nomenclature in pdp functions (there is no alloc_pdp yet). v7: Rebase after merged version of Mika's ppgtt cleanup patch series. v8: Rebase after final merged version of Mika's ppgtt/scratch patches. v9: Introduce PML4 (and 48-bit checks) until next patch (Akash). v10: Also use test_bit to detect when pd/pt are already allocated (Akash) Cc: Akash Goel <akash.goel@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Akash Goel <akash.goel@intel.com> [danvet: Amend commit message as suggested by Michel.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-29 23:23:46 +07:00
}
static bool
release_pd_entry(struct i915_page_directory * const pd,
const unsigned short idx,
struct i915_page_table * const pt,
const struct i915_page_scratch * const scratch)
{
bool free = false;
if (atomic_add_unless(&pt->used, -1, 1))
return false;
spin_lock(&pd->lock);
if (atomic_dec_and_test(&pt->used)) {
clear_pd_entry(pd, idx, scratch);
free = true;
}
spin_unlock(&pd->lock);
return free;
}
static void gen8_ppgtt_notify_vgt(struct i915_ppgtt *ppgtt, bool create)
{
struct drm_i915_private *dev_priv = ppgtt->vm.i915;
enum vgt_g2v_type msg;
int i;
if (create)
atomic_inc(px_used(ppgtt->pd)); /* never remove */
else
atomic_dec(px_used(ppgtt->pd));
mutex_lock(&dev_priv->vgpu.lock);
if (i915_vm_is_4lvl(&ppgtt->vm)) {
const u64 daddr = px_dma(ppgtt->pd);
I915_WRITE(vgtif_reg(pdp[0].lo), lower_32_bits(daddr));
I915_WRITE(vgtif_reg(pdp[0].hi), upper_32_bits(daddr));
msg = (create ? VGT_G2V_PPGTT_L4_PAGE_TABLE_CREATE :
VGT_G2V_PPGTT_L4_PAGE_TABLE_DESTROY);
} else {
for (i = 0; i < GEN8_3LVL_PDPES; i++) {
const u64 daddr = i915_page_dir_dma_addr(ppgtt, i);
I915_WRITE(vgtif_reg(pdp[i].lo), lower_32_bits(daddr));
I915_WRITE(vgtif_reg(pdp[i].hi), upper_32_bits(daddr));
}
msg = (create ? VGT_G2V_PPGTT_L3_PAGE_TABLE_CREATE :
VGT_G2V_PPGTT_L3_PAGE_TABLE_DESTROY);
}
/* g2v_notify atomically (via hv trap) consumes the message packet. */
I915_WRITE(vgtif_reg(g2v_notify), msg);
mutex_unlock(&dev_priv->vgpu.lock);
}
/* Index shifts into the pagetable are offset by GEN8_PTE_SHIFT [12] */
#define GEN8_PAGE_SIZE (SZ_4K) /* page and page-directory sizes are the same */
#define GEN8_PTE_SHIFT (ilog2(GEN8_PAGE_SIZE))
#define GEN8_PDES (GEN8_PAGE_SIZE / sizeof(u64))
#define gen8_pd_shift(lvl) ((lvl) * ilog2(GEN8_PDES))
#define gen8_pd_index(i, lvl) i915_pde_index((i), gen8_pd_shift(lvl))
#define __gen8_pte_shift(lvl) (GEN8_PTE_SHIFT + gen8_pd_shift(lvl))
#define __gen8_pte_index(a, lvl) i915_pde_index((a), __gen8_pte_shift(lvl))
static inline unsigned int
gen8_pd_range(u64 start, u64 end, int lvl, unsigned int *idx)
{
const int shift = gen8_pd_shift(lvl);
const u64 mask = ~0ull << gen8_pd_shift(lvl + 1);
GEM_BUG_ON(start >= end);
end += ~mask >> gen8_pd_shift(1);
*idx = i915_pde_index(start, shift);
if ((start ^ end) & mask)
return GEN8_PDES - *idx;
else
return i915_pde_index(end, shift) - *idx;
}
static inline bool gen8_pd_contains(u64 start, u64 end, int lvl)
{
const u64 mask = ~0ull << gen8_pd_shift(lvl + 1);
GEM_BUG_ON(start >= end);
return (start ^ end) & mask && (start & ~mask) == 0;
}
static inline unsigned int gen8_pt_count(u64 start, u64 end)
{
GEM_BUG_ON(start >= end);
if ((start ^ end) >> gen8_pd_shift(1))
return GEN8_PDES - (start & (GEN8_PDES - 1));
else
return end - start;
}
static inline unsigned int gen8_pd_top_count(const struct i915_address_space *vm)
{
unsigned int shift = __gen8_pte_shift(vm->top);
return (vm->total + (1ull << shift) - 1) >> shift;
}
static inline struct i915_page_directory *
gen8_pdp_for_page_index(struct i915_address_space * const vm, const u64 idx)
{
struct i915_ppgtt * const ppgtt = i915_vm_to_ppgtt(vm);
if (vm->top == 2)
return ppgtt->pd;
else
return i915_pd_entry(ppgtt->pd, gen8_pd_index(idx, vm->top));
}
static inline struct i915_page_directory *
gen8_pdp_for_page_address(struct i915_address_space * const vm, const u64 addr)
{
return gen8_pdp_for_page_index(vm, addr >> GEN8_PTE_SHIFT);
}
static void __gen8_ppgtt_cleanup(struct i915_address_space *vm,
struct i915_page_directory *pd,
int count, int lvl)
{
if (lvl) {
void **pde = pd->entry;
do {
if (!*pde)
continue;
__gen8_ppgtt_cleanup(vm, *pde, GEN8_PDES, lvl - 1);
} while (pde++, --count);
}
free_px(vm, pd);
}
static void gen8_ppgtt_cleanup(struct i915_address_space *vm)
{
struct i915_ppgtt *ppgtt = i915_vm_to_ppgtt(vm);
if (intel_vgpu_active(vm->i915))
gen8_ppgtt_notify_vgt(ppgtt, false);
__gen8_ppgtt_cleanup(vm, ppgtt->pd, gen8_pd_top_count(vm), vm->top);
free_scratch(vm);
}
static u64 __gen8_ppgtt_clear(struct i915_address_space * const vm,
struct i915_page_directory * const pd,
u64 start, const u64 end, int lvl)
{
const struct i915_page_scratch * const scratch = &vm->scratch[lvl];
unsigned int idx, len;
GEM_BUG_ON(end > vm->total >> GEN8_PTE_SHIFT);
len = gen8_pd_range(start, end, lvl--, &idx);
DBG("%s(%p):{ lvl:%d, start:%llx, end:%llx, idx:%d, len:%d, used:%d }\n",
__func__, vm, lvl + 1, start, end,
idx, len, atomic_read(px_used(pd)));
GEM_BUG_ON(!len || len >= atomic_read(px_used(pd)));
drm/i915/gtt: Free unused lower-level page tables Since "Dynamic page table allocations" were introduced, our page tables can grow (being dynamically allocated) with address space range usage. Unfortunately, their lifetime is bound to vm. This is not a huge problem when we're not using softpin - drm_mm is creating an upper bound on used range by causing addresses for our VMAs to eventually be reused. With softpin, long lived contexts can drain the system out of memory even with a single "small" object. For example: bo = bo_alloc(size); while(true) offset += size; exec(bo, offset); Will cause us to create new allocations until all memory in the system is used for tracking GPU pages (even though almost all PTEs in this vm are pointing to scratch). Let's free unused page tables in clear_range to prevent this - if no entries are used, we can safely free it and return this information to the caller (so that higher-level entry is pointing to scratch). v2: Document return value and free semantics (Joonas) v3: No newlines in vars block (Joonas) v4: Drop redundant local 'reduce' variable v5: Handle CI fail with enable_ppgtt=2 Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-3-git-send-email-michal.winiarski@intel.com
2016-10-13 19:02:42 +07:00
do {
struct i915_page_table *pt = pd->entry[idx];
if (atomic_fetch_inc(&pt->used) >> gen8_pd_shift(1) &&
gen8_pd_contains(start, end, lvl)) {
DBG("%s(%p):{ lvl:%d, idx:%d, start:%llx, end:%llx } removing pd\n",
__func__, vm, lvl + 1, idx, start, end);
clear_pd_entry(pd, idx, scratch);
__gen8_ppgtt_cleanup(vm, as_pd(pt), I915_PDES, lvl);
start += (u64)I915_PDES << gen8_pd_shift(lvl);
continue;
}
if (lvl) {
start = __gen8_ppgtt_clear(vm, as_pd(pt),
start, end, lvl);
} else {
unsigned int count;
u64 *vaddr;
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
count = gen8_pt_count(start, end);
DBG("%s(%p):{ lvl:%d, start:%llx, end:%llx, idx:%d, len:%d, used:%d } removing pte\n",
__func__, vm, lvl, start, end,
gen8_pd_index(start, 0), count,
atomic_read(&pt->used));
GEM_BUG_ON(!count || count >= atomic_read(&pt->used));
vaddr = kmap_atomic_px(pt);
memset64(vaddr + gen8_pd_index(start, 0),
vm->scratch[0].encode,
count);
kunmap_atomic(vaddr);
atomic_sub(count, &pt->used);
start += count;
}
if (release_pd_entry(pd, idx, pt, scratch))
free_px(vm, pt);
} while (idx++, --len);
return start;
}
drm/i915/gtt: Free unused lower-level page tables Since "Dynamic page table allocations" were introduced, our page tables can grow (being dynamically allocated) with address space range usage. Unfortunately, their lifetime is bound to vm. This is not a huge problem when we're not using softpin - drm_mm is creating an upper bound on used range by causing addresses for our VMAs to eventually be reused. With softpin, long lived contexts can drain the system out of memory even with a single "small" object. For example: bo = bo_alloc(size); while(true) offset += size; exec(bo, offset); Will cause us to create new allocations until all memory in the system is used for tracking GPU pages (even though almost all PTEs in this vm are pointing to scratch). Let's free unused page tables in clear_range to prevent this - if no entries are used, we can safely free it and return this information to the caller (so that higher-level entry is pointing to scratch). v2: Document return value and free semantics (Joonas) v3: No newlines in vars block (Joonas) v4: Drop redundant local 'reduce' variable v5: Handle CI fail with enable_ppgtt=2 Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/1476360162-24062-3-git-send-email-michal.winiarski@intel.com
2016-10-13 19:02:42 +07:00
static void gen8_ppgtt_clear(struct i915_address_space *vm,
u64 start, u64 length)
{
GEM_BUG_ON(!IS_ALIGNED(start, BIT_ULL(GEN8_PTE_SHIFT)));
GEM_BUG_ON(!IS_ALIGNED(length, BIT_ULL(GEN8_PTE_SHIFT)));
GEM_BUG_ON(range_overflows(start, length, vm->total));
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
start >>= GEN8_PTE_SHIFT;
length >>= GEN8_PTE_SHIFT;
GEM_BUG_ON(length == 0);
__gen8_ppgtt_clear(vm, i915_vm_to_ppgtt(vm)->pd,
start, start + length, vm->top);
}
static int __gen8_ppgtt_alloc(struct i915_address_space * const vm,
struct i915_page_directory * const pd,
u64 * const start, const u64 end, int lvl)
{
const struct i915_page_scratch * const scratch = &vm->scratch[lvl];
struct i915_page_table *alloc = NULL;
unsigned int idx, len;
int ret = 0;
GEM_BUG_ON(end > vm->total >> GEN8_PTE_SHIFT);
len = gen8_pd_range(*start, end, lvl--, &idx);
DBG("%s(%p):{ lvl:%d, start:%llx, end:%llx, idx:%d, len:%d, used:%d }\n",
__func__, vm, lvl + 1, *start, end,
idx, len, atomic_read(px_used(pd)));
GEM_BUG_ON(!len || (idx + len - 1) >> gen8_pd_shift(1));
spin_lock(&pd->lock);
GEM_BUG_ON(!atomic_read(px_used(pd))); /* Must be pinned! */
do {
struct i915_page_table *pt = pd->entry[idx];
if (!pt) {
spin_unlock(&pd->lock);
DBG("%s(%p):{ lvl:%d, idx:%d } allocating new tree\n",
__func__, vm, lvl + 1, idx);
drm/i915/bdw: Reorganize PT allocations The previous allocation mechanism would get 2 contiguous allocations, one for the page directories, and one for the page tables. As each page table is 1 page, and there are 512 of these per page directory, this goes to 2MB. An unfriendly request at best. Worse still, our HW now supports 4 page directories, and a 2MB allocation is not allowed. In order to fix this, this patch attempts to split up each page table allocation into a single, discrete allocation. There is nothing really fancy about the patch itself, it just has to manage an extra pointer indirection, and have a fancier bit of logic to free up the pages. To accommodate some of the added complexity, two new helpers are introduced to allocate, and free the page table pages. NOTE: I really wanted to split the way we do allocations, and the way in which we identify the page table/page directory being used. I found splitting this functionality up to be too unwieldy. I apologize in advance to the reviewer. I'd recommend looking at the result, rather than the diff. v2/NOTE2: This patch predated commit: 6f1cc993518462ccf039e195fabd47e7aa5bfd13 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Dec 31 15:50:31 2013 +0000 drm/i915: Avoid dereference past end of page arr It fixed the same issue as that patch, but because of the limbo state of PPGTT, Chris patch was merged instead. The excess churn is a result of my using my original patch, which has my preferred naming. Primarily act_* is changed to which_*, but it's mostly the same otherwise. I've kept the convention Chris used for the pte wrap (I had something slightly different, and broken - but fixable) v3: Rename which_p[..]e to drop which_ (Chris) Remove BUG_ON in inner loop (Chris) Redo the pde/pdpe wrap logic (Chris) v4: s/1MB/2MB in commit message (Imre) Plug leaking gen8_pt_pages in both the error path, as well as general free case (Imre) v5: Rename leftover "which_" variables (Imre) Add the pde = 0 wrap that was missed from v3 (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Squash in fixup from Ben.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-21 02:51:21 +07:00
pt = fetch_and_zero(&alloc);
if (lvl) {
if (!pt) {
pt = &alloc_pd(vm)->pt;
if (IS_ERR(pt)) {
ret = PTR_ERR(pt);
goto out;
}
}
fill_px(pt, vm->scratch[lvl].encode);
} else {
if (!pt) {
pt = alloc_pt(vm);
if (IS_ERR(pt)) {
ret = PTR_ERR(pt);
goto out;
}
}
if (intel_vgpu_active(vm->i915) ||
gen8_pt_count(*start, end) < I915_PDES)
fill_px(pt, vm->scratch[lvl].encode);
}
spin_lock(&pd->lock);
if (likely(!pd->entry[idx]))
set_pd_entry(pd, idx, pt);
else
alloc = pt, pt = pd->entry[idx];
}
if (lvl) {
atomic_inc(&pt->used);
spin_unlock(&pd->lock);
ret = __gen8_ppgtt_alloc(vm, as_pd(pt),
start, end, lvl);
if (unlikely(ret)) {
if (release_pd_entry(pd, idx, pt, scratch))
free_px(vm, pt);
goto out;
drm/i915/bdw: Reorganize PT allocations The previous allocation mechanism would get 2 contiguous allocations, one for the page directories, and one for the page tables. As each page table is 1 page, and there are 512 of these per page directory, this goes to 2MB. An unfriendly request at best. Worse still, our HW now supports 4 page directories, and a 2MB allocation is not allowed. In order to fix this, this patch attempts to split up each page table allocation into a single, discrete allocation. There is nothing really fancy about the patch itself, it just has to manage an extra pointer indirection, and have a fancier bit of logic to free up the pages. To accommodate some of the added complexity, two new helpers are introduced to allocate, and free the page table pages. NOTE: I really wanted to split the way we do allocations, and the way in which we identify the page table/page directory being used. I found splitting this functionality up to be too unwieldy. I apologize in advance to the reviewer. I'd recommend looking at the result, rather than the diff. v2/NOTE2: This patch predated commit: 6f1cc993518462ccf039e195fabd47e7aa5bfd13 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Dec 31 15:50:31 2013 +0000 drm/i915: Avoid dereference past end of page arr It fixed the same issue as that patch, but because of the limbo state of PPGTT, Chris patch was merged instead. The excess churn is a result of my using my original patch, which has my preferred naming. Primarily act_* is changed to which_*, but it's mostly the same otherwise. I've kept the convention Chris used for the pte wrap (I had something slightly different, and broken - but fixable) v3: Rename which_p[..]e to drop which_ (Chris) Remove BUG_ON in inner loop (Chris) Redo the pde/pdpe wrap logic (Chris) v4: s/1MB/2MB in commit message (Imre) Plug leaking gen8_pt_pages in both the error path, as well as general free case (Imre) v5: Rename leftover "which_" variables (Imre) Add the pde = 0 wrap that was missed from v3 (Imre) Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> [danvet: Squash in fixup from Ben.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-02-21 02:51:21 +07:00
}
spin_lock(&pd->lock);
atomic_dec(&pt->used);
GEM_BUG_ON(!atomic_read(&pt->used));
} else {
unsigned int count = gen8_pt_count(*start, end);
DBG("%s(%p):{ lvl:%d, start:%llx, end:%llx, idx:%d, len:%d, used:%d } inserting pte\n",
__func__, vm, lvl, *start, end,
gen8_pd_index(*start, 0), count,
atomic_read(&pt->used));
atomic_add(count, &pt->used);
/* All other pdes may be simultaneously removed */
GEM_BUG_ON(atomic_read(&pt->used) > 2 * I915_PDES);
*start += count;
}
} while (idx++, --len);
spin_unlock(&pd->lock);
out:
if (alloc)
free_px(vm, alloc);
return ret;
}
static int gen8_ppgtt_alloc(struct i915_address_space *vm,
u64 start, u64 length)
{
u64 from;
int err;
GEM_BUG_ON(!IS_ALIGNED(start, BIT_ULL(GEN8_PTE_SHIFT)));
GEM_BUG_ON(!IS_ALIGNED(length, BIT_ULL(GEN8_PTE_SHIFT)));
GEM_BUG_ON(range_overflows(start, length, vm->total));
start >>= GEN8_PTE_SHIFT;
length >>= GEN8_PTE_SHIFT;
GEM_BUG_ON(length == 0);
from = start;
err = __gen8_ppgtt_alloc(vm, i915_vm_to_ppgtt(vm)->pd,
&start, start + length, vm->top);
if (unlikely(err && from != start))
__gen8_ppgtt_clear(vm, i915_vm_to_ppgtt(vm)->pd,
from, start, vm->top);
return err;
}
static inline struct sgt_dma {
struct scatterlist *sg;
dma_addr_t dma, max;
} sgt_dma(struct i915_vma *vma) {
struct scatterlist *sg = vma->pages->sgl;
dma_addr_t addr = sg_dma_address(sg);
return (struct sgt_dma) { sg, addr, addr + sg->length };
}
static __always_inline u64
gen8_ppgtt_insert_pte(struct i915_ppgtt *ppgtt,
struct i915_page_directory *pdp,
struct sgt_dma *iter,
u64 idx,
enum i915_cache_level cache_level,
u32 flags)
{
struct i915_page_directory *pd;
const gen8_pte_t pte_encode = gen8_pte_encode(0, cache_level, flags);
gen8_pte_t *vaddr;
pd = i915_pd_entry(pdp, gen8_pd_index(idx, 2));
vaddr = kmap_atomic_px(i915_pt_entry(pd, gen8_pd_index(idx, 1)));
do {
vaddr[gen8_pd_index(idx, 0)] = pte_encode | iter->dma;
iter->dma += I915_GTT_PAGE_SIZE;
if (iter->dma >= iter->max) {
iter->sg = __sg_next(iter->sg);
if (!iter->sg) {
idx = 0;
break;
}
iter->dma = sg_dma_address(iter->sg);
iter->max = iter->dma + iter->sg->length;
}
if (gen8_pd_index(++idx, 0) == 0) {
if (gen8_pd_index(idx, 1) == 0) {
/* Limited by sg length for 3lvl */
if (gen8_pd_index(idx, 2) == 0)
break;
pd = pdp->entry[gen8_pd_index(idx, 2)];
}
kunmap_atomic(vaddr);
vaddr = kmap_atomic_px(i915_pt_entry(pd, gen8_pd_index(idx, 1)));
}
} while (1);
kunmap_atomic(vaddr);
return idx;
}
static void gen8_ppgtt_insert_huge(struct i915_vma *vma,
struct sgt_dma *iter,
enum i915_cache_level cache_level,
u32 flags)
{
const gen8_pte_t pte_encode = gen8_pte_encode(0, cache_level, flags);
u64 start = vma->node.start;
dma_addr_t rem = iter->sg->length;
GEM_BUG_ON(!i915_vm_is_4lvl(vma->vm));
do {
struct i915_page_directory * const pdp =
gen8_pdp_for_page_address(vma->vm, start);
struct i915_page_directory * const pd =
i915_pd_entry(pdp, __gen8_pte_index(start, 2));
gen8_pte_t encode = pte_encode;
unsigned int maybe_64K = -1;
unsigned int page_size;
gen8_pte_t *vaddr;
u16 index;
if (vma->page_sizes.sg & I915_GTT_PAGE_SIZE_2M &&
IS_ALIGNED(iter->dma, I915_GTT_PAGE_SIZE_2M) &&
rem >= I915_GTT_PAGE_SIZE_2M &&
!__gen8_pte_index(start, 0)) {
index = __gen8_pte_index(start, 1);
encode |= GEN8_PDE_PS_2M;
page_size = I915_GTT_PAGE_SIZE_2M;
vaddr = kmap_atomic_px(pd);
} else {
struct i915_page_table *pt =
i915_pt_entry(pd, __gen8_pte_index(start, 1));
index = __gen8_pte_index(start, 0);
page_size = I915_GTT_PAGE_SIZE;
if (!index &&
vma->page_sizes.sg & I915_GTT_PAGE_SIZE_64K &&
IS_ALIGNED(iter->dma, I915_GTT_PAGE_SIZE_64K) &&
(IS_ALIGNED(rem, I915_GTT_PAGE_SIZE_64K) ||
rem >= (I915_PDES - index) * I915_GTT_PAGE_SIZE))
maybe_64K = __gen8_pte_index(start, 1);
vaddr = kmap_atomic_px(pt);
}
do {
GEM_BUG_ON(iter->sg->length < page_size);
vaddr[index++] = encode | iter->dma;
start += page_size;
iter->dma += page_size;
rem -= page_size;
if (iter->dma >= iter->max) {
iter->sg = __sg_next(iter->sg);
if (!iter->sg)
break;
rem = iter->sg->length;
iter->dma = sg_dma_address(iter->sg);
iter->max = iter->dma + rem;
if (maybe_64K != -1 && index < I915_PDES &&
!(IS_ALIGNED(iter->dma, I915_GTT_PAGE_SIZE_64K) &&
(IS_ALIGNED(rem, I915_GTT_PAGE_SIZE_64K) ||
rem >= (I915_PDES - index) * I915_GTT_PAGE_SIZE)))
maybe_64K = -1;
if (unlikely(!IS_ALIGNED(iter->dma, page_size)))
break;
}
} while (rem >= page_size && index < I915_PDES);
kunmap_atomic(vaddr);
/*
* Is it safe to mark the 2M block as 64K? -- Either we have
* filled whole page-table with 64K entries, or filled part of
* it and have reached the end of the sg table and we have
* enough padding.
*/
if (maybe_64K != -1 &&
(index == I915_PDES ||
(i915_vm_has_scratch_64K(vma->vm) &&
!iter->sg && IS_ALIGNED(vma->node.start +
vma->node.size,
I915_GTT_PAGE_SIZE_2M)))) {
vaddr = kmap_atomic_px(pd);
vaddr[maybe_64K] |= GEN8_PDE_IPS_64K;
kunmap_atomic(vaddr);
page_size = I915_GTT_PAGE_SIZE_64K;
/*
* We write all 4K page entries, even when using 64K
* pages. In order to verify that the HW isn't cheating
* by using the 4K PTE instead of the 64K PTE, we want
* to remove all the surplus entries. If the HW skipped
* the 64K PTE, it will read/write into the scratch page
* instead - which we detect as missing results during
* selftests.
*/
if (I915_SELFTEST_ONLY(vma->vm->scrub_64K)) {
u16 i;
encode = vma->vm->scratch[0].encode;
vaddr = kmap_atomic_px(i915_pt_entry(pd, maybe_64K));
for (i = 1; i < index; i += 16)
memset64(vaddr + i, encode, 15);
kunmap_atomic(vaddr);
}
}
vma->page_sizes.gtt |= page_size;
} while (iter->sg);
}
static void gen8_ppgtt_insert(struct i915_address_space *vm,
struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 flags)
{
struct i915_ppgtt * const ppgtt = i915_vm_to_ppgtt(vm);
drm/i915: Deconstruct struct sgt_dma initialiser gcc-4.4 complains about: struct sgt_dma iter = { .sg = vma->pages->sgl, .dma = sg_dma_address(iter.sg), .max = iter.dma + iter.sg->length, }; drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘gen8_ppgtt_insert_4lvl’: drivers/gpu/drm/i915/i915_gem_gtt.c:938: error: ‘iter.sg’ is used uninitialized in this function drivers/gpu/drm/i915/i915_gem_gtt.c:939: error: ‘iter.dma’ is used uninitialized in this function and worse generates invalid code that triggers a GPF: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] PGD 0 Oops: 0000 [#1] SMP Modules linked in: snd_aloop nf_conntrack_ipv6 nf_defrag_ipv6 nf_log_ipv6 ip6table_filter ip6_tables ctr ccm xt_state nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_recent xt_owner xt_addrtype iptable_filter ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c ip_tables dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm irqbypass uas usb_storage hid_multitouch btusb btrtl uvcvideo videobuf2_v4l2 videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops sg ppdev dell_wmi sparse_keymap mei_wdt sd_mod iTCO_wdt iTCO_vendor_support rtsx_pci_ms memstick rtsx_pci_sdmmc mmc_core dell_smm_hwmon hwmon dell_laptop dell_smbios dcdbas joydev input_leds hci_uart btintel btqca btbcm bluetooth parport_pc parport i2c_hid intel_lpss_acpi intel_lpss pcspkr wmi int3400_thermal acpi_thermal_rel dell_rbtn mei_me mei snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ahci libahci acpi_pad xhci_pci xhci_hcd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore int3403_thermal arc4 e1000e ptp pps_core i2c_i801 iwlmvm mac80211 rtsx_pci iwlwifi cfg80211 rfkill intel_pch_thermal processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf i915 video fjes CPU: 2 PID: 2408 Comm: X Not tainted 4.10.0-rc5+ #1 Hardware name: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.11.3 11/09/2016 task: ffff880219fe4740 task.stack: ffffc90005f98000 RIP: 0010:gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: 0018:ffffc90005f9b8c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8802167d8000 RCX: 0000000000000001 RDX: 00000000ffff7000 RSI: ffff880219f94140 RDI: ffff880228444000 RBP: ffffc90005f9b948 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000080 R13: 0000000000000001 R14: ffffc90005f9bcd7 R15: ffff88020c9a83c0 FS: 00007fb53e1ee920(0000) GS:ffff88024dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000022ef95000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ppgtt_bind_vma+0x40/0x50 [i915] i915_vma_bind+0xcb/0x1c0 [i915] __i915_vma_do_pin+0x6e/0xd0 [i915] i915_gem_execbuffer_reserve_vma+0x162/0x1d0 [i915] i915_gem_execbuffer_reserve+0x4fc/0x510 [i915] ? __kmalloc+0x134/0x250 ? i915_gem_wait_for_error+0x25/0x100 [i915] ? i915_gem_wait_for_error+0x25/0x100 [i915] i915_gem_do_execbuffer+0x2df/0xa00 [i915] ? drm_malloc_gfp.clone.0+0x42/0x80 [i915] ? path_put+0x22/0x30 ? __check_object_size+0x62/0x1f0 ? terminate_walk+0x44/0x90 i915_gem_execbuffer2+0x95/0x1e0 [i915] drm_ioctl+0x243/0x490 ? handle_pte_fault+0x1d7/0x220 ? i915_gem_do_execbuffer+0xa00/0xa00 [i915] ? handle_mm_fault+0x10d/0x2a0 vfs_ioctl+0x18/0x30 do_vfs_ioctl+0x14b/0x3f0 SyS_ioctl+0x92/0xa0 entry_SYSCALL_64_fastpath+0x1a/0xa9 RIP: 0033:0x7fb53b4fcb77 RSP: 002b:00007ffe0c572898 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fb53e17c038 RCX: 00007fb53b4fcb77 RDX: 00007ffe0c572900 RSI: 0000000040406469 RDI: 000000000000000b RBP: 00007fb5376d67e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000028 R11: 0000000000003246 R12: 0000000000000000 R13: 0000000000000000 R14: 000055eecb314d00 R15: 000055eecb315460 Code: 0f 84 5d ff ff ff eb a2 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 58 0f 1f 44 00 00 31 c0 89 4d b0 <4c> 8b 60 10 44 8b 70 0c 48 89 d0 4c 8b 2e 48 c1 e8 27 25 ff 01 RIP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: ffffc90005f9b8c8 CR2: 0000000000000010 Recent gccs, such as 4.9, 6.3 or 7.2, do not generate the warning nor do they explode on use. If we manually create the struct using locals from the stack, this should eliminate this issue, and does not alter code generation with gcc-7.2. Fixes: 894ccebee2b0 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()") Reported-by: Kelly French <kfrench@federalhill.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kelly French <kfrench@federalhill.net> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171106211128.12538-1-chris@chris-wilson.co.uk Tested-by: Kelly French <kfrench@federalhill.net> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-11-07 04:11:28 +07:00
struct sgt_dma iter = sgt_dma(vma);
drm/i915/gen8: Add 4 level support in insert_entries and clear_range When 48b is enabled, gen8_ppgtt_insert_entries needs to read the Page Map Level 4 (PML4), before it selects which Page Directory Pointer (PDP) it will write to. Similarly, gen8_ppgtt_clear_range needs to get the correct PDP/PD range. This patch was inspired by Ben's "Depend exclusively on map and unmap_vma". v2: Rebase after s/page_tables/page_table/. v3: Remove unnecessary pdpe loop in gen8_ppgtt_clear_range_4lvl and use clamp_pdp in gen8_ppgtt_insert_entries (Akash). v4: Merge gen8_ppgtt_clear_range_4lvl into gen8_ppgtt_clear_range to maintain symmetry with gen8_ppgtt_insert_entries (Akash). v5: Do not mix pages and bytes in insert_entries (Akash). v6: Prevent overflow in sg_nents << PAGE_SHIFT, when inserting 4GB at once. v7: Rebase after Mika's ppgtt cleanup / scratch merge patch series. Use gen8_px_index functions, and remove unnecessary number of pages parameter in insert_pte_entries. v8: Change gen8_ppgtt_clear_pte_range to stop at PDP boundary, instead of adding and extra clamp function; remove unnecessary pdp_start/pdp_len variables (Akash). v9: pages->orig_nents instead of sg_nents(pages->sgl) to get the length (Akash). v10: Remove pdp warning check ingen8_ppgtt_insert_pte_entries until this commit (Akash). Reviewed-by: Akash Goel <akash.goel@intel.com> (v9) Cc: Akash Goel <akash.goel@intel.com> Signed-off-by: Michel Thierry <michel.thierry@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-08-03 15:53:27 +07:00
if (vma->page_sizes.sg > I915_GTT_PAGE_SIZE) {
gen8_ppgtt_insert_huge(vma, &iter, cache_level, flags);
} else {
u64 idx = vma->node.start >> GEN8_PTE_SHIFT;
do {
struct i915_page_directory * const pdp =
gen8_pdp_for_page_index(vm, idx);
idx = gen8_ppgtt_insert_pte(ppgtt, pdp, &iter, idx,
cache_level, flags);
} while (idx);
vma->page_sizes.gtt = I915_GTT_PAGE_SIZE;
}
}
static int gen8_init_scratch(struct i915_address_space *vm)
{
int ret;
int i;
/*
* If everybody agrees to not to write into the scratch page,
* we can reuse it for all vm, keeping contexts and processes separate.
*/
if (vm->has_read_only &&
vm->i915->kernel_context &&
vm->i915->kernel_context->vm) {
struct i915_address_space *clone = vm->i915->kernel_context->vm;
GEM_BUG_ON(!clone->has_read_only);
vm->scratch_order = clone->scratch_order;
memcpy(vm->scratch, clone->scratch, sizeof(vm->scratch));
px_dma(&vm->scratch[0]) = 0; /* no xfer of ownership */
return 0;
}
ret = setup_scratch_page(vm, __GFP_HIGHMEM);
if (ret)
return ret;
vm->scratch[0].encode =
gen8_pte_encode(px_dma(&vm->scratch[0]),
I915_CACHE_LLC, vm->has_read_only);
for (i = 1; i <= vm->top; i++) {
if (unlikely(setup_page_dma(vm, px_base(&vm->scratch[i]))))
goto free_scratch;
fill_px(&vm->scratch[i], vm->scratch[i - 1].encode);
vm->scratch[i].encode =
gen8_pde_encode(px_dma(&vm->scratch[i]),
I915_CACHE_LLC);
}
return 0;
free_scratch:
free_scratch(vm);
return -ENOMEM;
}
static int gen8_preallocate_top_level_pdp(struct i915_ppgtt *ppgtt)
{
struct i915_address_space *vm = &ppgtt->vm;
struct i915_page_directory *pd = ppgtt->pd;
unsigned int idx;
GEM_BUG_ON(vm->top != 2);
GEM_BUG_ON(gen8_pd_top_count(vm) != GEN8_3LVL_PDPES);
for (idx = 0; idx < GEN8_3LVL_PDPES; idx++) {
struct i915_page_directory *pde;
pde = alloc_pd(vm);
if (IS_ERR(pde))
return PTR_ERR(pde);
fill_px(pde, vm->scratch[1].encode);
set_pd_entry(pd, idx, pde);
atomic_inc(px_used(pde)); /* keep pinned */
}
wmb();
return 0;
}
static void ppgtt_init(struct i915_ppgtt *ppgtt, struct intel_gt *gt)
{
struct drm_i915_private *i915 = gt->i915;
ppgtt->vm.gt = gt;
ppgtt->vm.i915 = i915;
ppgtt->vm.dma = &i915->drm.pdev->dev;
ppgtt->vm.total = BIT_ULL(INTEL_INFO(i915)->ppgtt_size);
i915_address_space_init(&ppgtt->vm, VM_CLASS_PPGTT);
ppgtt->vm.vma_ops.bind_vma = ppgtt_bind_vma;
ppgtt->vm.vma_ops.unbind_vma = ppgtt_unbind_vma;
ppgtt->vm.vma_ops.set_pages = ppgtt_set_pages;
ppgtt->vm.vma_ops.clear_pages = clear_pages;
}
static struct i915_page_directory *
gen8_alloc_top_pd(struct i915_address_space *vm)
{
const unsigned int count = gen8_pd_top_count(vm);
struct i915_page_directory *pd;
GEM_BUG_ON(count > ARRAY_SIZE(pd->entry));
pd = __alloc_pd(offsetof(typeof(*pd), entry[count]));
if (unlikely(!pd))
return ERR_PTR(-ENOMEM);
if (unlikely(setup_page_dma(vm, px_base(pd)))) {
kfree(pd);
return ERR_PTR(-ENOMEM);
}
fill_page_dma(px_base(pd), vm->scratch[vm->top].encode, count);
atomic_inc(px_used(pd)); /* mark as pinned */
return pd;
}
/*
* GEN8 legacy ppgtt programming is accomplished through a max 4 PDP registers
* with a net effect resembling a 2-level page table in normal x86 terms. Each
* PDP represents 1GB of memory 4 * 512 * 512 * 4096 = 4GB legacy 32b address
* space.
*
*/
static struct i915_ppgtt *gen8_ppgtt_create(struct drm_i915_private *i915)
{
struct i915_ppgtt *ppgtt;
int err;
ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL);
if (!ppgtt)
return ERR_PTR(-ENOMEM);
ppgtt_init(ppgtt, &i915->gt);
ppgtt->vm.top = i915_vm_is_4lvl(&ppgtt->vm) ? 3 : 2;
/*
* From bdw, there is hw support for read-only pages in the PPGTT.
*
* Gen11 has HSDES#:1807136187 unresolved. Disable ro support
* for now.
*/
ppgtt->vm.has_read_only = INTEL_GEN(i915) != 11;
/* There are only few exceptions for gen >=6. chv and bxt.
* And we are not sure about the latter so play safe for now.
*/
if (IS_CHERRYVIEW(i915) || IS_BROXTON(i915))
ppgtt->vm.pt_kmap_wc = true;
err = gen8_init_scratch(&ppgtt->vm);
if (err)
goto err_free;
ppgtt->pd = gen8_alloc_top_pd(&ppgtt->vm);
if (IS_ERR(ppgtt->pd)) {
err = PTR_ERR(ppgtt->pd);
goto err_free_scratch;
}
drm/i915/gen8: Make pdp allocation more dynamic This transitional patch doesn't do much for the existing code. However, it should make upcoming patches to use the full 48b address space a bit easier. 32-bit ppgtt uses just 4 PDPs, while 48-bit ppgtt will have up-to 512; this patch prepares the existing functions to query the right number of pdps at run-time. This also means that used_pdpes should also be allocated during ppgtt_init, as the bitmap size will depend on the ppgtt address range selected. v2: Renamed pdp_free to be similar to pd/pt (unmap_and_free_pdp). v3: To facilitate testing, 48b mode will be available on Broadwell and GEN9+, when i915.enable_ppgtt = 3. v4: Rebase after s/page_tables/page_table/, added extra information about 4-level page table formats and use IS_ENABLED macro. v5: Check CONFIG_X86_64 instead of CONFIG_64BIT. v6: Rebase after Mika's ppgtt cleanup / scratch merge patch series, and follow his nomenclature in pdp functions (there is no alloc_pdp yet). v7: Rebase after merged version of Mika's ppgtt cleanup patch series. v8: Rebase after final merged version of Mika's ppgtt/scratch patches. v9: Introduce PML4 (and 48-bit checks) until next patch (Akash). v10: Also use test_bit to detect when pd/pt are already allocated (Akash) Cc: Akash Goel <akash.goel@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Akash Goel <akash.goel@intel.com> [danvet: Amend commit message as suggested by Michel.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-29 23:23:46 +07:00
if (!i915_vm_is_4lvl(&ppgtt->vm)) {
err = gen8_preallocate_top_level_pdp(ppgtt);
if (err)
goto err_free_pd;
}
drm/i915/gen8: Make pdp allocation more dynamic This transitional patch doesn't do much for the existing code. However, it should make upcoming patches to use the full 48b address space a bit easier. 32-bit ppgtt uses just 4 PDPs, while 48-bit ppgtt will have up-to 512; this patch prepares the existing functions to query the right number of pdps at run-time. This also means that used_pdpes should also be allocated during ppgtt_init, as the bitmap size will depend on the ppgtt address range selected. v2: Renamed pdp_free to be similar to pd/pt (unmap_and_free_pdp). v3: To facilitate testing, 48b mode will be available on Broadwell and GEN9+, when i915.enable_ppgtt = 3. v4: Rebase after s/page_tables/page_table/, added extra information about 4-level page table formats and use IS_ENABLED macro. v5: Check CONFIG_X86_64 instead of CONFIG_64BIT. v6: Rebase after Mika's ppgtt cleanup / scratch merge patch series, and follow his nomenclature in pdp functions (there is no alloc_pdp yet). v7: Rebase after merged version of Mika's ppgtt cleanup patch series. v8: Rebase after final merged version of Mika's ppgtt/scratch patches. v9: Introduce PML4 (and 48-bit checks) until next patch (Akash). v10: Also use test_bit to detect when pd/pt are already allocated (Akash) Cc: Akash Goel <akash.goel@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Akash Goel <akash.goel@intel.com> [danvet: Amend commit message as suggested by Michel.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-29 23:23:46 +07:00
ppgtt->vm.insert_entries = gen8_ppgtt_insert;
ppgtt->vm.allocate_va_range = gen8_ppgtt_alloc;
ppgtt->vm.clear_range = gen8_ppgtt_clear;
if (intel_vgpu_active(i915))
gen8_ppgtt_notify_vgt(ppgtt, true);
ppgtt->vm.cleanup = gen8_ppgtt_cleanup;
return ppgtt;
drm/i915/gen8: Make pdp allocation more dynamic This transitional patch doesn't do much for the existing code. However, it should make upcoming patches to use the full 48b address space a bit easier. 32-bit ppgtt uses just 4 PDPs, while 48-bit ppgtt will have up-to 512; this patch prepares the existing functions to query the right number of pdps at run-time. This also means that used_pdpes should also be allocated during ppgtt_init, as the bitmap size will depend on the ppgtt address range selected. v2: Renamed pdp_free to be similar to pd/pt (unmap_and_free_pdp). v3: To facilitate testing, 48b mode will be available on Broadwell and GEN9+, when i915.enable_ppgtt = 3. v4: Rebase after s/page_tables/page_table/, added extra information about 4-level page table formats and use IS_ENABLED macro. v5: Check CONFIG_X86_64 instead of CONFIG_64BIT. v6: Rebase after Mika's ppgtt cleanup / scratch merge patch series, and follow his nomenclature in pdp functions (there is no alloc_pdp yet). v7: Rebase after merged version of Mika's ppgtt cleanup patch series. v8: Rebase after final merged version of Mika's ppgtt/scratch patches. v9: Introduce PML4 (and 48-bit checks) until next patch (Akash). v10: Also use test_bit to detect when pd/pt are already allocated (Akash) Cc: Akash Goel <akash.goel@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Akash Goel <akash.goel@intel.com> [danvet: Amend commit message as suggested by Michel.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-07-29 23:23:46 +07:00
err_free_pd:
__gen8_ppgtt_cleanup(&ppgtt->vm, ppgtt->pd,
gen8_pd_top_count(&ppgtt->vm), ppgtt->vm.top);
err_free_scratch:
free_scratch(&ppgtt->vm);
err_free:
kfree(ppgtt);
return ERR_PTR(err);
drm/i915/gen8: Dynamic page table allocations This finishes off the dynamic page tables allocations, in the legacy 3 level style that already exists. Most everything has already been setup to this point, the patch finishes off the enabling by setting the appropriate function pointers. In LRC mode, contexts need to know the PDPs when they are populated. With dynamic page table allocations, these PDPs may not exist yet. Check if PDPs have been allocated and use the scratch page if they do not exist yet. Before submission, update the PDPs in the logic ring context as PDPs have been allocated. v2: Update aliasing/true ppgtt allocate/teardown/clear functions for gen 6 & 7. v3: Rebase. v4: Remove BUG() from ppgtt_unbind_vma, but keep checking that either teardown_va_range or clear_range functions exist (Daniel). v5: Similar to gen6, in init, gen8_ppgtt_clear_range call is only needed for aliasing ppgtt. Zombie tracking was originally added for teardown function and is no longer required. v6: Update err_out case in gen8_alloc_va_range (missed from lastest rebase). v7: Rebase after s/page_tables/page_table/. v8: Updated scratch_pt check after scratch flag was removed in previous patch. v9: Note that lrc mode needs to be updated to support init state without any PDP. v10: Unmap correct page_table in gen8_alloc_va_range's error case, clean-up gen8_aliasing_ppgtt_init (remove duplicated map), and initialize PTs during page table allocation. v11: Squashed LRC enabling commit, otherwise LRC mode would be left broken until it was updated to handle the init case without any PDP. v12: Do not overallocate new_pts bitmap, make alloc_gen8_temp_bitmaps static and don't abuse of inline functions. (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v2+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-04-08 18:13:34 +07:00
}
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
/* Write pde (index) from the page directory @pd to the page table @pt */
static inline void gen6_write_pde(const struct gen6_ppgtt *ppgtt,
const unsigned int pde,
const struct i915_page_table *pt)
{
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
/* Caller needs to make sure the write completes if necessary */
iowrite32(GEN6_PDE_ADDR_ENCODE(px_dma(pt)) | GEN6_PDE_VALID,
ppgtt->pd_addr + pde);
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
}
static void gen7_ppgtt_enable(struct intel_gt *gt)
{
struct drm_i915_private *i915 = gt->i915;
struct intel_uncore *uncore = gt->uncore;
struct intel_engine_cs *engine;
drm/i915: Allocate intel_engine_cs structure only for the enabled engines With the possibility of addition of many more number of rings in future, the drm_i915_private structure could bloat as an array, of type intel_engine_cs, is embedded inside it. struct intel_engine_cs engine[I915_NUM_ENGINES]; Though this is still fine as generally there is only a single instance of drm_i915_private structure used, but not all of the possible rings would be enabled or active on most of the platforms. Some memory can be saved by allocating intel_engine_cs structure only for the enabled/active engines. Currently the engine/ring ID is kept static and dev_priv->engine[] is simply indexed using the enums defined in intel_engine_id. To save memory and continue using the static engine/ring IDs, 'engine' is defined as an array of pointers. struct intel_engine_cs *engine[I915_NUM_ENGINES]; dev_priv->engine[engine_ID] will be NULL for disabled engine instances. There is a text size reduction of 928 bytes, from 1028200 to 1027272, for i915.o file (but for i915.ko file text size remain same as 1193131 bytes). v2: - Remove the engine iterator field added in drm_i915_private structure, instead pass a local iterator variable to the for_each_engine** macros. (Chris) - Do away with intel_engine_initialized() and instead directly use the NULL pointer check on engine pointer. (Chris) v3: - Remove for_each_engine_id() macro, as the updated macro for_each_engine() can be used in place of it. (Chris) - Protect the access to Render engine Fault register with a NULL check, as engine specific init is done later in Driver load sequence. v4: - Use !!dev_priv->engine[VCS] style for the engine check in getparam. (Chris) - Kill the superfluous init_engine_lists(). v5: - Cleanup the intel_engines_init() & intel_engines_setup(), with respect to allocation of intel_engine_cs structure. (Chris) v6: - Rebase. v7: - Optimize the for_each_engine_masked() macro. (Chris) - Change the type of 'iter' local variable to enum intel_engine_id. (Chris) - Rebase. v8: Rebase. v9: Rebase. v10: - For index calculation use engine ID instead of pointer based arithmetic in intel_engine_sync_index() as engine pointers are not contiguous now (Chris) - For appropriateness, rename local enum variable 'iter' to 'id'. (Joonas) - Use for_each_engine macro for cleanup in intel_engines_init() and remove check for NULL engine pointer in cleanup() routines. (Joonas) v11: Rebase. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Akash Goel <akash.goel@intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476378888-7372-1-git-send-email-akash.goel@intel.com
2016-10-14 00:14:48 +07:00
enum intel_engine_id id;
u32 ecochk;
intel_uncore_rmw(uncore, GAC_ECO_BITS, 0, ECOBITS_PPGTT_CACHE64B);
ecochk = intel_uncore_read(uncore, GAM_ECOCHK);
if (IS_HASWELL(i915)) {
ecochk |= ECOCHK_PPGTT_WB_HSW;
} else {
ecochk |= ECOCHK_PPGTT_LLC_IVB;
ecochk &= ~ECOCHK_PPGTT_GFDT_IVB;
}
intel_uncore_write(uncore, GAM_ECOCHK, ecochk);
for_each_engine(engine, i915, id) {
/* GFX_MODE is per-ring on gen7+ */
ENGINE_WRITE(engine,
RING_MODE_GEN7,
_MASKED_BIT_ENABLE(GFX_PPGTT_ENABLE));
}
}
static void gen6_ppgtt_enable(struct intel_gt *gt)
{
struct intel_uncore *uncore = gt->uncore;
intel_uncore_rmw(uncore,
GAC_ECO_BITS,
0,
ECOBITS_SNB_BIT | ECOBITS_PPGTT_CACHE64B);
intel_uncore_rmw(uncore,
GAB_CTL,
0,
GAB_CTL_CONT_AFTER_PAGEFAULT);
intel_uncore_rmw(uncore,
GAM_ECOCHK,
0,
ECOCHK_SNB_BIT | ECOCHK_PPGTT_CACHE64B);
if (HAS_PPGTT(uncore->i915)) /* may be disabled for VT-d */
intel_uncore_write(uncore,
GFX_MODE,
_MASKED_BIT_ENABLE(GFX_PPGTT_ENABLE));
}
/* PPGTT support for Sandybdrige/Gen6 and later */
static void gen6_ppgtt_clear_range(struct i915_address_space *vm,
u64 start, u64 length)
{
struct gen6_ppgtt * const ppgtt = to_gen6_ppgtt(i915_vm_to_ppgtt(vm));
const unsigned int first_entry = start / I915_GTT_PAGE_SIZE;
const gen6_pte_t scratch_pte = vm->scratch[0].encode;
unsigned int pde = first_entry / GEN6_PTES;
unsigned int pte = first_entry % GEN6_PTES;
unsigned int num_entries = length / I915_GTT_PAGE_SIZE;
while (num_entries) {
struct i915_page_table * const pt =
i915_pt_entry(ppgtt->base.pd, pde++);
const unsigned int count = min(num_entries, GEN6_PTES - pte);
gen6_pte_t *vaddr;
GEM_BUG_ON(px_base(pt) == px_base(&vm->scratch[1]));
num_entries -= count;
GEM_BUG_ON(count > atomic_read(&pt->used));
if (!atomic_sub_return(count, &pt->used))
ppgtt->scan_for_unused_pt = true;
/*
* Note that the hw doesn't support removing PDE on the fly
* (they are cached inside the context with no means to
* invalidate the cache), so we can only reset the PTE
* entries back to scratch.
*/
vaddr = kmap_atomic_px(pt);
memset32(vaddr + pte, scratch_pte, count);
kunmap_atomic(vaddr);
pte = 0;
}
}
static void gen6_ppgtt_insert_entries(struct i915_address_space *vm,
struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 flags)
{
struct i915_ppgtt *ppgtt = i915_vm_to_ppgtt(vm);
struct i915_page_directory * const pd = ppgtt->pd;
unsigned first_entry = vma->node.start / I915_GTT_PAGE_SIZE;
unsigned act_pt = first_entry / GEN6_PTES;
unsigned act_pte = first_entry % GEN6_PTES;
const u32 pte_encode = vm->pte_encode(0, cache_level, flags);
drm/i915: Deconstruct struct sgt_dma initialiser gcc-4.4 complains about: struct sgt_dma iter = { .sg = vma->pages->sgl, .dma = sg_dma_address(iter.sg), .max = iter.dma + iter.sg->length, }; drivers/gpu/drm/i915/i915_gem_gtt.c: In function ‘gen8_ppgtt_insert_4lvl’: drivers/gpu/drm/i915/i915_gem_gtt.c:938: error: ‘iter.sg’ is used uninitialized in this function drivers/gpu/drm/i915/i915_gem_gtt.c:939: error: ‘iter.dma’ is used uninitialized in this function and worse generates invalid code that triggers a GPF: BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 IP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] PGD 0 Oops: 0000 [#1] SMP Modules linked in: snd_aloop nf_conntrack_ipv6 nf_defrag_ipv6 nf_log_ipv6 ip6table_filter ip6_tables ctr ccm xt_state nf_log_ipv4 nf_log_common xt_LOG xt_limit xt_recent xt_owner xt_addrtype iptable_filter ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack libcrc32c ip_tables dm_mod vhost_net macvtap macvlan vhost tun kvm_intel kvm irqbypass uas usb_storage hid_multitouch btusb btrtl uvcvideo videobuf2_v4l2 videobuf2_core videodev media videobuf2_vmalloc videobuf2_memops sg ppdev dell_wmi sparse_keymap mei_wdt sd_mod iTCO_wdt iTCO_vendor_support rtsx_pci_ms memstick rtsx_pci_sdmmc mmc_core dell_smm_hwmon hwmon dell_laptop dell_smbios dcdbas joydev input_leds hci_uart btintel btqca btbcm bluetooth parport_pc parport i2c_hid intel_lpss_acpi intel_lpss pcspkr wmi int3400_thermal acpi_thermal_rel dell_rbtn mei_me mei snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic ahci libahci acpi_pad xhci_pci xhci_hcd snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer snd soundcore int3403_thermal arc4 e1000e ptp pps_core i2c_i801 iwlmvm mac80211 rtsx_pci iwlwifi cfg80211 rfkill intel_pch_thermal processor_thermal_device int340x_thermal_zone intel_soc_dts_iosf i915 video fjes CPU: 2 PID: 2408 Comm: X Not tainted 4.10.0-rc5+ #1 Hardware name: Dell Inc. Latitude E7470/0T6HHJ, BIOS 1.11.3 11/09/2016 task: ffff880219fe4740 task.stack: ffffc90005f98000 RIP: 0010:gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: 0018:ffffc90005f9b8c8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8802167d8000 RCX: 0000000000000001 RDX: 00000000ffff7000 RSI: ffff880219f94140 RDI: ffff880228444000 RBP: ffffc90005f9b948 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000080 R13: 0000000000000001 R14: ffffc90005f9bcd7 R15: ffff88020c9a83c0 FS: 00007fb53e1ee920(0000) GS:ffff88024dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000022ef95000 CR4: 00000000003406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ppgtt_bind_vma+0x40/0x50 [i915] i915_vma_bind+0xcb/0x1c0 [i915] __i915_vma_do_pin+0x6e/0xd0 [i915] i915_gem_execbuffer_reserve_vma+0x162/0x1d0 [i915] i915_gem_execbuffer_reserve+0x4fc/0x510 [i915] ? __kmalloc+0x134/0x250 ? i915_gem_wait_for_error+0x25/0x100 [i915] ? i915_gem_wait_for_error+0x25/0x100 [i915] i915_gem_do_execbuffer+0x2df/0xa00 [i915] ? drm_malloc_gfp.clone.0+0x42/0x80 [i915] ? path_put+0x22/0x30 ? __check_object_size+0x62/0x1f0 ? terminate_walk+0x44/0x90 i915_gem_execbuffer2+0x95/0x1e0 [i915] drm_ioctl+0x243/0x490 ? handle_pte_fault+0x1d7/0x220 ? i915_gem_do_execbuffer+0xa00/0xa00 [i915] ? handle_mm_fault+0x10d/0x2a0 vfs_ioctl+0x18/0x30 do_vfs_ioctl+0x14b/0x3f0 SyS_ioctl+0x92/0xa0 entry_SYSCALL_64_fastpath+0x1a/0xa9 RIP: 0033:0x7fb53b4fcb77 RSP: 002b:00007ffe0c572898 EFLAGS: 00003246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007fb53e17c038 RCX: 00007fb53b4fcb77 RDX: 00007ffe0c572900 RSI: 0000000040406469 RDI: 000000000000000b RBP: 00007fb5376d67e0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000028 R11: 0000000000003246 R12: 0000000000000000 R13: 0000000000000000 R14: 000055eecb314d00 R15: 000055eecb315460 Code: 0f 84 5d ff ff ff eb a2 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 58 0f 1f 44 00 00 31 c0 89 4d b0 <4c> 8b 60 10 44 8b 70 0c 48 89 d0 4c 8b 2e 48 c1 e8 27 25 ff 01 RIP: gen8_ppgtt_insert_4lvl+0x1b/0x1e0 [i915] RSP: ffffc90005f9b8c8 CR2: 0000000000000010 Recent gccs, such as 4.9, 6.3 or 7.2, do not generate the warning nor do they explode on use. If we manually create the struct using locals from the stack, this should eliminate this issue, and does not alter code generation with gcc-7.2. Fixes: 894ccebee2b0 ("drm/i915: Micro-optimise gen8_ppgtt_insert_entries()") Reported-by: Kelly French <kfrench@federalhill.net> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kelly French <kfrench@federalhill.net> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171106211128.12538-1-chris@chris-wilson.co.uk Tested-by: Kelly French <kfrench@federalhill.net> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
2017-11-07 04:11:28 +07:00
struct sgt_dma iter = sgt_dma(vma);
gen6_pte_t *vaddr;
GEM_BUG_ON(pd->entry[act_pt] == &vm->scratch[1]);
vaddr = kmap_atomic_px(i915_pt_entry(pd, act_pt));
do {
vaddr[act_pte] = pte_encode | GEN6_PTE_ADDR_ENCODE(iter.dma);
iter.dma += I915_GTT_PAGE_SIZE;
if (iter.dma == iter.max) {
iter.sg = __sg_next(iter.sg);
if (!iter.sg)
break;
iter.dma = sg_dma_address(iter.sg);
iter.max = iter.dma + iter.sg->length;
}
if (++act_pte == GEN6_PTES) {
kunmap_atomic(vaddr);
vaddr = kmap_atomic_px(i915_pt_entry(pd, ++act_pt));
act_pte = 0;
}
} while (1);
kunmap_atomic(vaddr);
vma->page_sizes.gtt = I915_GTT_PAGE_SIZE;
}
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
static int gen6_alloc_va_range(struct i915_address_space *vm,
u64 start, u64 length)
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
{
struct gen6_ppgtt *ppgtt = to_gen6_ppgtt(i915_vm_to_ppgtt(vm));
struct i915_page_directory * const pd = ppgtt->base.pd;
struct i915_page_table *pt, *alloc = NULL;
intel_wakeref_t wakeref;
u64 from = start;
unsigned int pde;
bool flush = false;
int ret = 0;
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
wakeref = intel_runtime_pm_get(&vm->i915->runtime_pm);
spin_lock(&pd->lock);
gen6_for_each_pde(pt, pd, start, length, pde) {
const unsigned int count = gen6_pte_count(start, length);
if (px_base(pt) == px_base(&vm->scratch[1])) {
spin_unlock(&pd->lock);
pt = fetch_and_zero(&alloc);
if (!pt)
pt = alloc_pt(vm);
if (IS_ERR(pt)) {
ret = PTR_ERR(pt);
goto unwind_out;
}
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
fill32_px(pt, vm->scratch[0].encode);
spin_lock(&pd->lock);
if (pd->entry[pde] == &vm->scratch[1]) {
pd->entry[pde] = pt;
if (i915_vma_is_bound(ppgtt->vma,
I915_VMA_GLOBAL_BIND)) {
gen6_write_pde(ppgtt, pde, pt);
flush = true;
}
} else {
alloc = pt;
pt = pd->entry[pde];
}
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
}
atomic_add(count, &pt->used);
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
}
spin_unlock(&pd->lock);
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
if (flush)
gen6_ggtt_invalidate(vm->gt->ggtt);
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
goto out;
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
unwind_out:
gen6_ppgtt_clear_range(vm, from, start - from);
out:
if (alloc)
free_px(vm, alloc);
intel_runtime_pm_put(&vm->i915->runtime_pm, wakeref);
return ret;
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
}
static int gen6_ppgtt_init_scratch(struct gen6_ppgtt *ppgtt)
{
struct i915_address_space * const vm = &ppgtt->base.vm;
struct i915_page_directory * const pd = ppgtt->base.pd;
int ret;
ret = setup_scratch_page(vm, __GFP_HIGHMEM);
if (ret)
return ret;
vm->scratch[0].encode =
vm->pte_encode(px_dma(&vm->scratch[0]),
I915_CACHE_NONE, PTE_READ_ONLY);
if (unlikely(setup_page_dma(vm, px_base(&vm->scratch[1])))) {
cleanup_scratch_page(vm);
return -ENOMEM;
}
fill32_px(&vm->scratch[1], vm->scratch[0].encode);
memset_p(pd->entry, &vm->scratch[1], I915_PDES);
return 0;
}
static void gen6_ppgtt_free_pd(struct gen6_ppgtt *ppgtt)
{
struct i915_page_directory * const pd = ppgtt->base.pd;
struct i915_page_dma * const scratch =
px_base(&ppgtt->base.vm.scratch[1]);
struct i915_page_table *pt;
u32 pde;
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
gen6_for_all_pdes(pt, pd, pde)
if (px_base(pt) != scratch)
free_px(&ppgtt->base.vm, pt);
}
static void gen6_ppgtt_cleanup(struct i915_address_space *vm)
{
struct gen6_ppgtt *ppgtt = to_gen6_ppgtt(i915_vm_to_ppgtt(vm));
struct drm_i915_private *i915 = vm->i915;
drm/i915: Create page table allocators As we move toward dynamic page table allocation, it becomes much easier to manage our data structures if break do things less coarsely by breaking up all of our actions into individual tasks. This makes the code easier to write, read, and verify. Aside from the dissection of the allocation functions, the patch statically allocates the page table structures without a page directory. This remains the same for all platforms, The patch itself should not have much functional difference. The primary noticeable difference is the fact that page tables are no longer allocated, but rather statically declared as part of the page directory. This has non-zero overhead, but things gain additional complexity as a result. This patch exists for a few reasons: 1. Splitting out the functions allows easily combining GEN6 and GEN8 code. Page tables have no difference based on GEN8. As we'll see in a future patch when we add the DMA mappings to the allocations, it requires only one small change to make work, and error handling should just fall into place. 2. Unless we always want to allocate all page tables under a given PDE, we'll have to eventually break this up into an array of pointers (or pointer to pointer). 3. Having the discrete functions is easier to review, and understand. All allocations and frees now take place in just a couple of locations. Reviewing, and catching leaks should be easy. 4. Less important: the GFP flags are confined to one location, which makes playing around with such things trivial. v2: Updated commit message to explain why this patch exists v3: For lrc, s/pdp.page_directory[i].daddr/pdp.page_directory[i]->daddr/ v4: Renamed free_pt/pd_single functions to unmap_and_free_pt/pd (Daniel) v5: Added additional safety checks in gen8 clear/free/unmap. v6: Use WARN_ON and return -EINVAL in alloc_pt_range (Mika). v7: Make err_out loop symmetrical to the way we allocate in alloc_pt_range. Also s/page_tables/page_table and correct commit message (Mika) Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-02-24 23:22:36 +07:00
drm/i915/gtt: Always acquire struct_mutex for gen6_ppgtt_cleanup We rearranged the vm_destroy_ioctl to avoid taking struct_mutex, little realising that buried underneath the gen6 ppgtt release path was a struct_mutex requirement (to remove its GGTT vma). Until that struct_mutex is vanquished, take a detour in gen6_ppgtt_cleanup to do the i915_vma_destroy from inside a worker under the struct_mutex. <4> [257.740160] WARN_ON(debug_locks && !lock_is_held(&(&vma->vm->i915->drm.struct_mutex)->dep_map)) <4> [257.740213] WARNING: CPU: 3 PID: 1507 at drivers/gpu/drm/i915/i915_vma.c:841 i915_vma_destroy+0x1ae/0x3a0 [i915] <4> [257.740214] Modules linked in: snd_hda_codec_hdmi i915 x86_pkg_temp_thermal mei_hdcp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core r8169 realtek snd_pcm mei_me mei prime_numbers lpc_ich <4> [257.740224] CPU: 3 PID: 1507 Comm: gem_vm_create Tainted: G U 5.2.0-rc1-CI-CI_DRM_6118+ #1 <4> [257.740225] Hardware name: MSI MS-7924/Z97M-G43(MS-7924), BIOS V1.12 02/15/2016 <4> [257.740249] RIP: 0010:i915_vma_destroy+0x1ae/0x3a0 [i915] <4> [257.740250] Code: 00 00 00 48 81 c7 c8 00 00 00 e8 ed 08 f0 e0 85 c0 0f 85 78 fe ff ff 48 c7 c6 e8 ec 30 a0 48 c7 c7 da 55 33 a0 e8 42 8c e9 e0 <0f> 0b 8b 83 40 01 00 00 85 c0 0f 84 63 fe ff ff 48 c7 c1 c1 58 33 <4> [257.740251] RSP: 0018:ffffc90000aafc68 EFLAGS: 00010282 <4> [257.740252] RAX: 0000000000000000 RBX: ffff8883f7957840 RCX: 0000000000000003 <4> [257.740253] RDX: 0000000000000046 RSI: 0000000000000006 RDI: ffffffff8212d1b9 <4> [257.740254] RBP: ffffc90000aafcc8 R08: 0000000000000000 R09: 0000000000000000 <4> [257.740255] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8883f4d5c2a8 <4> [257.740256] R13: ffff8883f4d5d680 R14: ffff8883f4d5c668 R15: ffff8883f4d5c2f0 <4> [257.740257] FS: 00007f777fa8fe40(0000) GS:ffff88840f780000(0000) knlGS:0000000000000000 <4> [257.740258] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4> [257.740259] CR2: 00007f777f6522b0 CR3: 00000003c612a006 CR4: 00000000001606e0 <4> [257.740260] Call Trace: <4> [257.740283] gen6_ppgtt_cleanup+0x25/0x60 [i915] <4> [257.740306] i915_ppgtt_release+0x102/0x290 [i915] <4> [257.740330] i915_gem_vm_destroy_ioctl+0x7c/0xa0 [i915] <4> [257.740376] ? i915_gem_vm_create_ioctl+0x160/0x160 [i915] <4> [257.740379] drm_ioctl_kernel+0x83/0xf0 <4> [257.740382] drm_ioctl+0x2f3/0x3b0 <4> [257.740422] ? i915_gem_vm_create_ioctl+0x160/0x160 [i915] <4> [257.740426] ? _raw_spin_unlock_irqrestore+0x39/0x60 <4> [257.740430] do_vfs_ioctl+0xa0/0x6e0 <4> [257.740433] ? lock_acquire+0xa6/0x1c0 <4> [257.740436] ? __task_pid_nr_ns+0xb9/0x1f0 <4> [257.740439] ksys_ioctl+0x35/0x60 <4> [257.740441] __x64_sys_ioctl+0x11/0x20 <4> [257.740443] do_syscall_64+0x55/0x1c0 <4> [257.740445] entry_SYSCALL_64_after_hwframe+0x49/0xbe References: e0695db7298e ("drm/i915: Create/destroy VM (ppGTT) for use with contexts") Fixes: 7f3f317a66ca ("drm/i915: Restore control over ppgtt for context creation ABI") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190523064933.23604-1-chris@chris-wilson.co.uk
2019-05-23 13:49:33 +07:00
/* FIXME remove the struct_mutex to bring the locking under control */
mutex_lock(&i915->drm.struct_mutex);
i915_vma_destroy(ppgtt->vma);
mutex_unlock(&i915->drm.struct_mutex);
gen6_ppgtt_free_pd(ppgtt);
free_scratch(vm);
kfree(ppgtt->base.pd);
}
static int pd_vma_set_pages(struct i915_vma *vma)
{
vma->pages = ERR_PTR(-ENODEV);
return 0;
}
static void pd_vma_clear_pages(struct i915_vma *vma)
{
GEM_BUG_ON(!vma->pages);
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
vma->pages = NULL;
}
static int pd_vma_bind(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 unused)
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vma->vm);
struct gen6_ppgtt *ppgtt = vma->private;
u32 ggtt_offset = i915_ggtt_offset(vma) / I915_GTT_PAGE_SIZE;
struct i915_page_table *pt;
unsigned int pde;
drm/i915: Track GEN6 page table usage Instead of implementing the full tracking + dynamic allocation, this patch does a bit less than half of the work, by tracking and warning on unexpected conditions. The tracking itself follows which PTEs within a page table are currently being used for objects. The next patch will modify this to actually allocate the page tables only when necessary. With the current patch there isn't much in the way of making a gen agnostic range allocation function. However, in the next patch we'll add more specificity which makes having separate functions a bit easier to manage. One important change introduced here is that DMA mappings are created/destroyed at the same page directories/tables are allocated/deallocated. Notice that aliasing PPGTT is not managed here. The patch which actually begins dynamic allocation/teardown explains the reasoning for this. v2: s/pdp.page_directory/pdp.page_directories Make a scratch page allocation helper v3: Rebase and expand commit message. v4: Allocate required pagetables only when it is needed, _bind_to_vm instead of bind_vma (Daniel). v5: Rebased to remove the unnecessary noise in the diff, also: - PDE mask is GEN agnostic, renamed GEN6_PDE_MASK to I915_PDE_MASK. - Removed unnecessary checks in gen6_alloc_va_range. - Changed map/unmap_px_single macros to use dma functions directly and be part of a static inline function instead. - Moved drm_device plumbing through page tables operation to its own patch. - Moved allocate/teardown_va_range calls until they are fully implemented (in subsequent patch). - Merged pt and scratch_pt unmap_and_free path. - Moved scratch page allocator helper to the patch that will use it. v6: Reduce complexity by not tearing down pagetables dynamically, the same can be achieved while freeing empty vms. (Daniel) v7: s/i915_dma_map_px_single/i915_dma_map_single s/gen6_write_pdes/gen6_write_pde Prevent a NULL case when only GGTT is available. (Mika) v8: Rebased after s/page_tables/page_table/. v9: Reworked i915_pte_index and i915_pte_count. Also exercise bitmap allocation here (gen6_alloc_va_range) and fix incorrect write_page_range in i915_gem_restore_gtt_mappings (Mika). Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v3+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-16 23:00:56 +07:00
px_base(ppgtt->base.pd)->ggtt_offset = ggtt_offset * sizeof(gen6_pte_t);
ppgtt->pd_addr = (gen6_pte_t __iomem *)ggtt->gsm + ggtt_offset;
gen6_for_all_pdes(pt, ppgtt->base.pd, pde)
gen6_write_pde(ppgtt, pde, pt);
gen6_ggtt_invalidate(ggtt);
return 0;
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
}
static void pd_vma_unbind(struct i915_vma *vma)
drm/i915: Finish gen6/7 dynamic page table allocation This patch continues on the idea from "Track GEN6 page table usage". From here on, in the steady state, PDEs are all pointing to the scratch page table (as recommended in the spec). When an object is allocated in the VA range, the code will determine if we need to allocate a page for the page table. Similarly when the object is destroyed, we will remove, and free the page table pointing the PDE back to the scratch page. Following patches will work to unify the code a bit as we bring in GEN8 support. GEN6 and GEN8 are different enough that I had a hard time to get to this point with as much common code as I do. The aliasing PPGTT must pre-allocate all of the page tables. There are a few reasons for this. Two trivial ones: aliasing ppgtt goes through the ggtt paths, so it's hard to maintain, we currently do not restore the default context (assuming the previous force reload is indeed necessary). Most importantly though, the only way (it seems from empirical evidence) to invalidate the CS TLBs on non-render ring is to either use ring sync (which requires actually stopping the rings in order to synchronize when the sync completes vs. where you are in execution), or to reload DCLV. Since without full PPGTT we do not ever reload the DCLV register, there is no good way to achieve this. The simplest solution is just to not support dynamic page table creation/destruction in the aliasing PPGTT. We could always reload DCLV, but this seems like quite a bit of excess overhead only to save at most 2MB-4k of memory for the aliasing PPGTT page tables. v2: Make the page table bitmap declared inside the function (Chris) Simplify the way scratching address space works. Move the alloc/teardown tracepoints up a level in the call stack so that both all implementations get the trace. v3: Updated trace event to spit out a name v4: Aliasing ppgtt is now initialized differently (in setup global gtt) v5: Rebase to latest code. Also removed unnecessary aliasing ppgtt check for trace, as it is no longer possible after the PPGTT cleanup patch series of a couple of months ago (Daniel). v6: Implement changes from code review (Daniel): - allocate/teardown_va_range calls added. - Add a scratch page allocation helper (only need the address). - Move trace events to a new patch. - Use updated mark_tlbs_dirty. - Moved pt preallocation for aliasing ppgtt into gen6_ppgtt_init. v7: teardown_va_range removed (Daniel). In init, gen6_ppgtt_clear_range call is only needed for aliasing ppgtt. v8: Rebase after s/page_tables/page_table/. v9: Remove unnecessary scratch flag in page_table struct, future patches can just compare against ppgtt->scratch_pt, and alloc_pt_scratch becomes redundant. Initialize scratch_pt and pt. (Mika) v10: Clean up aliasing ppgtt init error path and prevent leaking the ppgtt obj when init fails. (Mika) Updated commit author. (Daniel) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Michel Thierry <michel.thierry@intel.com> (v4+) Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-24 22:46:22 +07:00
{
struct gen6_ppgtt *ppgtt = vma->private;
struct i915_page_directory * const pd = ppgtt->base.pd;
struct i915_page_dma * const scratch =
px_base(&ppgtt->base.vm.scratch[1]);
struct i915_page_table *pt;
unsigned int pde;
if (!ppgtt->scan_for_unused_pt)
return;
/* Free all no longer used page tables */
gen6_for_all_pdes(pt, ppgtt->base.pd, pde) {
if (px_base(pt) == scratch || atomic_read(&pt->used))
continue;
free_px(&ppgtt->base.vm, pt);
pd->entry[pde] = scratch;
}
ppgtt->scan_for_unused_pt = false;
}
static const struct i915_vma_ops pd_vma_ops = {
.set_pages = pd_vma_set_pages,
.clear_pages = pd_vma_clear_pages,
.bind_vma = pd_vma_bind,
.unbind_vma = pd_vma_unbind,
};
static struct i915_vma *pd_vma_create(struct gen6_ppgtt *ppgtt, int size)
{
struct drm_i915_private *i915 = ppgtt->base.vm.i915;
struct i915_ggtt *ggtt = ppgtt->base.vm.gt->ggtt;
struct i915_vma *vma;
GEM_BUG_ON(!IS_ALIGNED(size, I915_GTT_PAGE_SIZE));
GEM_BUG_ON(size > ggtt->vm.total);
vma = i915_vma_alloc();
if (!vma)
return ERR_PTR(-ENOMEM);
i915_active_init(i915, &vma->active, NULL, NULL);
vma->vm = &ggtt->vm;
vma->ops = &pd_vma_ops;
vma->private = ppgtt;
vma->size = size;
vma->fence_size = size;
atomic_set(&vma->flags, I915_VMA_GGTT);
vma->ggtt_view.type = I915_GGTT_VIEW_ROTATED; /* prevent fencing */
INIT_LIST_HEAD(&vma->obj_link);
INIT_LIST_HEAD(&vma->closed_link);
mutex_lock(&vma->vm->mutex);
list_add(&vma->vm_link, &vma->vm->unbound_list);
mutex_unlock(&vma->vm->mutex);
return vma;
}
int gen6_ppgtt_pin(struct i915_ppgtt *base)
{
struct gen6_ppgtt *ppgtt = to_gen6_ppgtt(base);
int err;
GEM_BUG_ON(ppgtt->base.vm.closed);
/*
* Workaround the limited maximum vma->pin_count and the aliasing_ppgtt
* which will be pinned into every active context.
* (When vma->pin_count becomes atomic, I expect we will naturally
* need a larger, unpacked, type and kill this redundancy.)
*/
if (ppgtt->pin_count++)
return 0;
/*
* PPGTT PDEs reside in the GGTT and consists of 512 entries. The
* allocator works in address space sizes, so it's multiplied by page
* size. We allocate at the top of the GTT to avoid fragmentation.
*/
err = i915_vma_pin(ppgtt->vma,
0, GEN6_PD_ALIGN,
PIN_GLOBAL | PIN_HIGH);
if (err)
goto unpin;
return 0;
unpin:
ppgtt->pin_count = 0;
return err;
}
void gen6_ppgtt_unpin(struct i915_ppgtt *base)
{
struct gen6_ppgtt *ppgtt = to_gen6_ppgtt(base);
GEM_BUG_ON(!ppgtt->pin_count);
if (--ppgtt->pin_count)
return;
i915_vma_unpin(ppgtt->vma);
}
void gen6_ppgtt_unpin_all(struct i915_ppgtt *base)
{
struct gen6_ppgtt *ppgtt = to_gen6_ppgtt(base);
if (!ppgtt->pin_count)
return;
ppgtt->pin_count = 0;
i915_vma_unpin(ppgtt->vma);
}
static struct i915_ppgtt *gen6_ppgtt_create(struct drm_i915_private *i915)
{
struct i915_ggtt * const ggtt = &i915->ggtt;
struct gen6_ppgtt *ppgtt;
int err;
ppgtt = kzalloc(sizeof(*ppgtt), GFP_KERNEL);
if (!ppgtt)
return ERR_PTR(-ENOMEM);
ppgtt_init(&ppgtt->base, &i915->gt);
ppgtt->base.vm.top = 1;
ppgtt->base.vm.allocate_va_range = gen6_alloc_va_range;
ppgtt->base.vm.clear_range = gen6_ppgtt_clear_range;
ppgtt->base.vm.insert_entries = gen6_ppgtt_insert_entries;
ppgtt->base.vm.cleanup = gen6_ppgtt_cleanup;
ppgtt->base.vm.pte_encode = ggtt->vm.pte_encode;
ppgtt->base.pd = __alloc_pd(sizeof(*ppgtt->base.pd));
if (!ppgtt->base.pd) {
err = -ENOMEM;
goto err_free;
}
err = gen6_ppgtt_init_scratch(ppgtt);
if (err)
goto err_pd;
ppgtt->vma = pd_vma_create(ppgtt, GEN6_PD_SIZE);
if (IS_ERR(ppgtt->vma)) {
err = PTR_ERR(ppgtt->vma);
goto err_scratch;
}
return &ppgtt->base;
err_scratch:
free_scratch(&ppgtt->base.vm);
err_pd:
kfree(ppgtt->base.pd);
err_free:
kfree(ppgtt);
return ERR_PTR(err);
}
static void gtt_write_workarounds(struct intel_gt *gt)
{
struct drm_i915_private *i915 = gt->i915;
struct intel_uncore *uncore = gt->uncore;
/* This function is for gtt related workarounds. This function is
* called on driver load and after a GPU reset, so you can place
* workarounds here even if they get overwritten by GPU reset.
*/
2018-05-09 04:29:23 +07:00
/* WaIncreaseDefaultTLBEntries:chv,bdw,skl,bxt,kbl,glk,cfl,cnl,icl */
if (IS_BROADWELL(i915))
intel_uncore_write(uncore,
GEN8_L3_LRA_1_GPGPU,
GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_BDW);
else if (IS_CHERRYVIEW(i915))
intel_uncore_write(uncore,
GEN8_L3_LRA_1_GPGPU,
GEN8_L3_LRA_1_GPGPU_DEFAULT_VALUE_CHV);
else if (IS_GEN9_LP(i915))
intel_uncore_write(uncore,
GEN8_L3_LRA_1_GPGPU,
GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_BXT);
else if (INTEL_GEN(i915) >= 9 && INTEL_GEN(i915) <= 11)
intel_uncore_write(uncore,
GEN8_L3_LRA_1_GPGPU,
GEN9_L3_LRA_1_GPGPU_DEFAULT_VALUE_SKL);
/*
* To support 64K PTEs we need to first enable the use of the
* Intermediate-Page-Size(IPS) bit of the PDE field via some magical
* mmio, otherwise the page-walker will simply ignore the IPS bit. This
* shouldn't be needed after GEN10.
*
* 64K pages were first introduced from BDW+, although technically they
* only *work* from gen9+. For pre-BDW we instead have the option for
* 32K pages, but we don't currently have any support for it in our
* driver.
*/
if (HAS_PAGE_SIZES(i915, I915_GTT_PAGE_SIZE_64K) &&
INTEL_GEN(i915) <= 10)
intel_uncore_rmw(uncore,
GEN8_GAMW_ECO_DEV_RW_IA,
0,
GAMW_ECO_ENABLE_64K_IPS_FIELD);
if (IS_GEN_RANGE(i915, 8, 11)) {
bool can_use_gtt_cache = true;
/*
* According to the BSpec if we use 2M/1G pages then we also
* need to disable the GTT cache. At least on BDW we can see
* visual corruption when using 2M pages, and not disabling the
* GTT cache.
*/
if (HAS_PAGE_SIZES(i915, I915_GTT_PAGE_SIZE_2M))
can_use_gtt_cache = false;
/* WaGttCachingOffByDefault */
intel_uncore_write(uncore,
HSW_GTT_CACHE_EN,
can_use_gtt_cache ? GTT_CACHE_EN_ALL : 0);
WARN_ON_ONCE(can_use_gtt_cache &&
intel_uncore_read(uncore,
HSW_GTT_CACHE_EN) == 0);
}
}
int i915_ppgtt_init_hw(struct intel_gt *gt)
{
struct drm_i915_private *i915 = gt->i915;
gtt_write_workarounds(gt);
if (IS_GEN(i915, 6))
gen6_ppgtt_enable(gt);
else if (IS_GEN(i915, 7))
gen7_ppgtt_enable(gt);
return 0;
}
static struct i915_ppgtt *
__ppgtt_create(struct drm_i915_private *i915)
{
if (INTEL_GEN(i915) < 8)
return gen6_ppgtt_create(i915);
else
return gen8_ppgtt_create(i915);
}
struct i915_ppgtt *
i915_ppgtt_create(struct drm_i915_private *i915)
{
struct i915_ppgtt *ppgtt;
ppgtt = __ppgtt_create(i915);
if (IS_ERR(ppgtt))
return ppgtt;
trace_i915_ppgtt_create(&ppgtt->vm);
return ppgtt;
}
/* Certain Gen5 chipsets require require idling the GPU before
* unmapping anything from the GTT when VT-d is enabled.
*/
static bool needs_idle_maps(struct drm_i915_private *dev_priv)
{
/* Query intel_iommu to see if we need the workaround. Presumably that
* was loaded first.
*/
return IS_GEN(dev_priv, 5) && IS_MOBILE(dev_priv) && intel_vtd_active();
}
static void ggtt_suspend_mappings(struct i915_ggtt *ggtt)
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 23:21:30 +07:00
{
struct drm_i915_private *i915 = ggtt->vm.i915;
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 23:21:30 +07:00
/* Don't bother messing with faults pre GEN6 as we have little
* documentation supporting that it's a good idea.
*/
if (INTEL_GEN(i915) < 6)
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 23:21:30 +07:00
return;
intel_gt_check_and_clear_faults(ggtt->vm.gt);
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 23:21:30 +07:00
ggtt->vm.clear_range(&ggtt->vm, 0, ggtt->vm.total);
ggtt->invalidate(ggtt);
drm/i915: Disable GGTT PTEs on GEN6+ suspend Once the machine gets to a certain point in the suspend process, we expect the GPU to be idle. If it is not, we might corrupt memory. Empirically (with an early version of this patch) we have seen this is not the case. We cannot currently explain why the latent GPU writes occur. In the technical sense, this patch is a workaround in that we have an issue we can't explain, and the patch indirectly solves the issue. However, it's really better than a workaround because we understand why it works, and it really should be a safe thing to do in all cases. The noticeable effect other than the debug messages would be an increase in the suspend time. I have not measure how expensive it actually is. I think it would be good to spend further time to root cause why we're seeing these latent writes, but it shouldn't preclude preventing the fallout. NOTE: It should be safe (and makes some sense IMO) to also keep the VALID bit unset on resume when we clear_range(). I've opted not to do this as properly clearing those bits at some later point would be extra work. v2: Fix bugzilla link Bugzilla: http://bugs.freedesktop.org/show_bug.cgi?id=65496 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59321 Tested-by: Takashi Iwai <tiwai@suse.de> Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Tested-By: Todd Previte <tprevite@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-10-16 23:21:30 +07:00
}
void i915_gem_suspend_gtt_mappings(struct drm_i915_private *i915)
{
ggtt_suspend_mappings(&i915->ggtt);
}
int i915_gem_gtt_prepare_pages(struct drm_i915_gem_object *obj,
struct sg_table *pages)
{
do {
if (dma_map_sg_attrs(&obj->base.dev->pdev->dev,
pages->sgl, pages->nents,
PCI_DMA_BIDIRECTIONAL,
DMA_ATTR_NO_WARN))
return 0;
drm/i915: Return immediately if trylock fails for direct-reclaim Ignore trying to shrink from i915 if we fail to acquire the struct_mutex in the shrinker while performing direct-reclaim. The trade-off being (much) lower latency for non-i915 clients at an increased risk of being unable to obtain a page from direct-reclaim without hitting the oom-notifier. The proviso being that we still keep trying to hard obtain the lock for kswapd so that we can reap under heavy memory pressure. v2: Taint all mutexes taken within the shrinker with the struct_mutex subclass as an early warning system, and drop I915_SHRINK_ACTIVE from vmap to reduce the number of dangerous paths. We also have to drop I915_SHRINK_ACTIVE from oom-notifier to be able to make the same claim that ACTIVE is only used from outside context, which fits in with a longer strategy of avoiding stalls due to scanning active during shrinking. The danger in using the subclass struct_mutex is that we declare ourselves more knowledgable than lockdep and deprive ourselves of automatic coverage. Instead, we require ourselves to mark up any mutex taken inside the shrinker in order to detect lock-inversion, and if we miss any we are doomed to a deadlock at the worst possible moment. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-1-chris@chris-wilson.co.uk
2019-01-07 18:54:24 +07:00
/*
* If the DMA remap fails, one cause can be that we have
* too many objects pinned in a small remapping table,
* such as swiotlb. Incrementally purge all other objects and
* try again - if there are no more pages to remove from
* the DMA remapper, i915_gem_shrink will return 0.
*/
GEM_BUG_ON(obj->mm.pages == pages);
} while (i915_gem_shrink(to_i915(obj->base.dev),
obj->base.size >> PAGE_SHIFT, NULL,
I915_SHRINK_BOUND |
drm/i915: Return immediately if trylock fails for direct-reclaim Ignore trying to shrink from i915 if we fail to acquire the struct_mutex in the shrinker while performing direct-reclaim. The trade-off being (much) lower latency for non-i915 clients at an increased risk of being unable to obtain a page from direct-reclaim without hitting the oom-notifier. The proviso being that we still keep trying to hard obtain the lock for kswapd so that we can reap under heavy memory pressure. v2: Taint all mutexes taken within the shrinker with the struct_mutex subclass as an early warning system, and drop I915_SHRINK_ACTIVE from vmap to reduce the number of dangerous paths. We also have to drop I915_SHRINK_ACTIVE from oom-notifier to be able to make the same claim that ACTIVE is only used from outside context, which fits in with a longer strategy of avoiding stalls due to scanning active during shrinking. The danger in using the subclass struct_mutex is that we declare ourselves more knowledgable than lockdep and deprive ourselves of automatic coverage. Instead, we require ourselves to mark up any mutex taken inside the shrinker in order to detect lock-inversion, and if we miss any we are doomed to a deadlock at the worst possible moment. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190107115509.12523-1-chris@chris-wilson.co.uk
2019-01-07 18:54:24 +07:00
I915_SHRINK_UNBOUND));
return -ENOSPC;
}
static void gen8_set_pte(void __iomem *addr, gen8_pte_t pte)
{
writeq(pte, addr);
}
static void gen8_ggtt_insert_page(struct i915_address_space *vm,
dma_addr_t addr,
u64 offset,
enum i915_cache_level level,
u32 unused)
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
gen8_pte_t __iomem *pte =
(gen8_pte_t __iomem *)ggtt->gsm + offset / I915_GTT_PAGE_SIZE;
gen8_set_pte(pte, gen8_pte_encode(addr, level, 0));
ggtt->invalidate(ggtt);
}
static void gen8_ggtt_insert_entries(struct i915_address_space *vm,
struct i915_vma *vma,
enum i915_cache_level level,
u32 flags)
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
struct sgt_iter sgt_iter;
gen8_pte_t __iomem *gtt_entries;
const gen8_pte_t pte_encode = gen8_pte_encode(0, level, 0);
dma_addr_t addr;
/*
* Note that we ignore PTE_READ_ONLY here. The caller must be careful
* not to allow the user to override access to a read only page.
*/
gtt_entries = (gen8_pte_t __iomem *)ggtt->gsm;
gtt_entries += vma->node.start / I915_GTT_PAGE_SIZE;
for_each_sgt_daddr(addr, sgt_iter, vma->pages)
gen8_set_pte(gtt_entries++, pte_encode | addr);
/*
* We want to flush the TLBs only after we're certain all the PTE
* updates have finished.
*/
ggtt->invalidate(ggtt);
}
static void gen6_ggtt_insert_page(struct i915_address_space *vm,
dma_addr_t addr,
u64 offset,
enum i915_cache_level level,
u32 flags)
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
gen6_pte_t __iomem *pte =
(gen6_pte_t __iomem *)ggtt->gsm + offset / I915_GTT_PAGE_SIZE;
iowrite32(vm->pte_encode(addr, level, flags), pte);
ggtt->invalidate(ggtt);
}
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
/*
* Binds an object into the global gtt with the specified cache level. The object
* will be accessible to the GPU via commands whose operands reference offsets
* within the global GTT as well as accessible by the GPU through the GMADR
* mapped BAR (dev_priv->mm.gtt->gtt).
*/
static void gen6_ggtt_insert_entries(struct i915_address_space *vm,
struct i915_vma *vma,
enum i915_cache_level level,
u32 flags)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
gen6_pte_t __iomem *entries = (gen6_pte_t __iomem *)ggtt->gsm;
unsigned int i = vma->node.start / I915_GTT_PAGE_SIZE;
struct sgt_iter iter;
dma_addr_t addr;
for_each_sgt_daddr(addr, iter, vma->pages)
iowrite32(vm->pte_encode(addr, level, flags), &entries[i++]);
/*
* We want to flush the TLBs only after we're certain all the PTE
* updates have finished.
*/
ggtt->invalidate(ggtt);
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
}
static void nop_clear_range(struct i915_address_space *vm,
u64 start, u64 length)
{
}
static void gen8_ggtt_clear_range(struct i915_address_space *vm,
u64 start, u64 length)
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
unsigned first_entry = start / I915_GTT_PAGE_SIZE;
unsigned num_entries = length / I915_GTT_PAGE_SIZE;
const gen8_pte_t scratch_pte = vm->scratch[0].encode;
gen8_pte_t __iomem *gtt_base =
(gen8_pte_t __iomem *)ggtt->gsm + first_entry;
const int max_entries = ggtt_total_entries(ggtt) - first_entry;
int i;
if (WARN(num_entries > max_entries,
"First entry = %d; Num entries = %d (max=%d)\n",
first_entry, num_entries, max_entries))
num_entries = max_entries;
for (i = 0; i < num_entries; i++)
gen8_set_pte(&gtt_base[i], scratch_pte);
}
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
static void bxt_vtd_ggtt_wa(struct i915_address_space *vm)
{
struct drm_i915_private *dev_priv = vm->i915;
/*
* Make sure the internal GAM fifo has been cleared of all GTT
* writes before exiting stop_machine(). This guarantees that
* any aperture accesses waiting to start in another process
* cannot back up behind the GTT writes causing a hang.
* The register can be any arbitrary GAM register.
*/
POSTING_READ(GFX_FLSH_CNTL_GEN6);
}
struct insert_page {
struct i915_address_space *vm;
dma_addr_t addr;
u64 offset;
enum i915_cache_level level;
};
static int bxt_vtd_ggtt_insert_page__cb(void *_arg)
{
struct insert_page *arg = _arg;
gen8_ggtt_insert_page(arg->vm, arg->addr, arg->offset, arg->level, 0);
bxt_vtd_ggtt_wa(arg->vm);
return 0;
}
static void bxt_vtd_ggtt_insert_page__BKL(struct i915_address_space *vm,
dma_addr_t addr,
u64 offset,
enum i915_cache_level level,
u32 unused)
{
struct insert_page arg = { vm, addr, offset, level };
stop_machine(bxt_vtd_ggtt_insert_page__cb, &arg, NULL);
}
struct insert_entries {
struct i915_address_space *vm;
struct i915_vma *vma;
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
enum i915_cache_level level;
u32 flags;
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
};
static int bxt_vtd_ggtt_insert_entries__cb(void *_arg)
{
struct insert_entries *arg = _arg;
gen8_ggtt_insert_entries(arg->vm, arg->vma, arg->level, arg->flags);
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
bxt_vtd_ggtt_wa(arg->vm);
return 0;
}
static void bxt_vtd_ggtt_insert_entries__BKL(struct i915_address_space *vm,
struct i915_vma *vma,
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
enum i915_cache_level level,
u32 flags)
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
{
struct insert_entries arg = { vm, vma, level, flags };
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
stop_machine(bxt_vtd_ggtt_insert_entries__cb, &arg, NULL);
}
struct clear_range {
struct i915_address_space *vm;
u64 start;
u64 length;
};
static int bxt_vtd_ggtt_clear_range__cb(void *_arg)
{
struct clear_range *arg = _arg;
gen8_ggtt_clear_range(arg->vm, arg->start, arg->length);
bxt_vtd_ggtt_wa(arg->vm);
return 0;
}
static void bxt_vtd_ggtt_clear_range__BKL(struct i915_address_space *vm,
u64 start,
u64 length)
{
struct clear_range arg = { vm, start, length };
stop_machine(bxt_vtd_ggtt_clear_range__cb, &arg, NULL);
}
static void gen6_ggtt_clear_range(struct i915_address_space *vm,
u64 start, u64 length)
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
unsigned first_entry = start / I915_GTT_PAGE_SIZE;
unsigned num_entries = length / I915_GTT_PAGE_SIZE;
gen6_pte_t scratch_pte, __iomem *gtt_base =
(gen6_pte_t __iomem *)ggtt->gsm + first_entry;
const int max_entries = ggtt_total_entries(ggtt) - first_entry;
int i;
if (WARN(num_entries > max_entries,
"First entry = %d; Num entries = %d (max=%d)\n",
first_entry, num_entries, max_entries))
num_entries = max_entries;
scratch_pte = vm->scratch[0].encode;
for (i = 0; i < num_entries; i++)
iowrite32(scratch_pte, &gtt_base[i]);
}
static void i915_ggtt_insert_page(struct i915_address_space *vm,
dma_addr_t addr,
u64 offset,
enum i915_cache_level cache_level,
u32 unused)
{
unsigned int flags = (cache_level == I915_CACHE_NONE) ?
AGP_USER_MEMORY : AGP_USER_CACHED_MEMORY;
intel_gtt_insert_page(addr, offset >> PAGE_SHIFT, flags);
}
static void i915_ggtt_insert_entries(struct i915_address_space *vm,
struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 unused)
{
unsigned int flags = (cache_level == I915_CACHE_NONE) ?
AGP_USER_MEMORY : AGP_USER_CACHED_MEMORY;
intel_gtt_insert_sg_entries(vma->pages, vma->node.start >> PAGE_SHIFT,
flags);
}
static void i915_ggtt_clear_range(struct i915_address_space *vm,
u64 start, u64 length)
{
intel_gtt_clear_range(start >> PAGE_SHIFT, length >> PAGE_SHIFT);
}
static int ggtt_bind_vma(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 flags)
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
{
struct drm_i915_private *i915 = vma->vm->i915;
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
struct drm_i915_gem_object *obj = vma->obj;
intel_wakeref_t wakeref;
u32 pte_flags;
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
/* Applicable to VLV (gen8+ do not support RO in the GGTT) */
pte_flags = 0;
if (i915_gem_object_is_readonly(obj))
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
pte_flags |= PTE_READ_ONLY;
with_intel_runtime_pm(&i915->runtime_pm, wakeref)
vma->vm->insert_entries(vma->vm, vma, cache_level, pte_flags);
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
vma->page_sizes.gtt = I915_GTT_PAGE_SIZE;
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
/*
* Without aliasing PPGTT there's no difference between
* GLOBAL/LOCAL_BIND, it's all the same ptes. Hence unconditionally
* upgrade to both bound if we bind either to avoid double-binding.
*/
atomic_or(I915_VMA_GLOBAL_BIND | I915_VMA_LOCAL_BIND, &vma->flags);
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
return 0;
}
static void ggtt_unbind_vma(struct i915_vma *vma)
{
struct drm_i915_private *i915 = vma->vm->i915;
intel_wakeref_t wakeref;
with_intel_runtime_pm(&i915->runtime_pm, wakeref)
vma->vm->clear_range(vma->vm, vma->node.start, vma->size);
}
drm/i915: restore ggtt double-bind avoidance This was accidentally lost in commit 75d04a3773ecee617847de963ae4195d6aa74c28 Author: Mika Kuoppala <mika.kuoppala@linux.intel.com> Date: Tue Apr 28 17:56:17 2015 +0300 drm/i915/gtt: Allocate va range only if vma is not bound While at it implement an improved version suggested by Chris which avoids the double-bind irrespective of what type of bind is done first. Note that this exact bug was already addressed in commit d0e30adc42d979e4adc36b6c112b57337423b70c Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Wed Jul 29 20:02:48 2015 +0100 drm/i915: Mark PIN_USER binding as GLOBAL_BIND without the aliasing ppgtt but the problem is still that originally in commit 0875546c5318c85c13d07014af5350e9000bc9e9 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Apr 20 09:04:05 2015 -0700 drm/i915: Fix up the vma aliasing ppgtt binding if forgotten to take into account there case where we have a GLOBAL_BIND before a LOCAL_BIND. This patch here fixes that. v2: Pimp commit message and revert the partial fix. v3: Split into two functions to specialize on aliasing_ppgtt y/n. v4: WARN_ON for paranoia in the init sequence, since the ggtt probe and aliasing ppgtt setup are far apart. v5: Style nits. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michel Thierry <michel.thierry@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://mid.gmane.org/1444911781-32607-1-git-send-email-daniel.vetter@ffwll.ch Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-10-15 19:23:01 +07:00
static int aliasing_gtt_bind_vma(struct i915_vma *vma,
enum i915_cache_level cache_level,
u32 flags)
{
struct drm_i915_private *i915 = vma->vm->i915;
u32 pte_flags;
int ret;
/* Currently applicable only to VLV */
pte_flags = 0;
if (i915_gem_object_is_readonly(vma->obj))
pte_flags |= PTE_READ_ONLY;
if (flags & I915_VMA_LOCAL_BIND) {
struct i915_ppgtt *alias = i915_vm_to_ggtt(vma->vm)->alias;
if (!i915_vma_is_bound(vma, I915_VMA_LOCAL_BIND)) {
ret = alias->vm.allocate_va_range(&alias->vm,
vma->node.start,
vma->size);
if (ret)
return ret;
}
alias->vm.insert_entries(&alias->vm, vma,
cache_level, pte_flags);
}
if (flags & I915_VMA_GLOBAL_BIND) {
intel_wakeref_t wakeref;
with_intel_runtime_pm(&i915->runtime_pm, wakeref) {
vma->vm->insert_entries(vma->vm, vma,
cache_level, pte_flags);
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 05:10:56 +07:00
}
return 0;
}
static void aliasing_gtt_unbind_vma(struct i915_vma *vma)
{
struct drm_i915_private *i915 = vma->vm->i915;
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 05:10:56 +07:00
if (i915_vma_is_bound(vma, I915_VMA_GLOBAL_BIND)) {
struct i915_address_space *vm = vma->vm;
intel_wakeref_t wakeref;
with_intel_runtime_pm(&i915->runtime_pm, wakeref)
vm->clear_range(vm, vma->node.start, vma->size);
}
if (i915_vma_is_bound(vma, I915_VMA_LOCAL_BIND)) {
struct i915_address_space *vm =
&i915_vm_to_ggtt(vma->vm)->alias->vm;
vm->clear_range(vm, vma->node.start, vma->size);
}
}
void i915_gem_gtt_finish_pages(struct drm_i915_gem_object *obj,
struct sg_table *pages)
{
struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
struct device *kdev = &dev_priv->drm.pdev->dev;
struct i915_ggtt *ggtt = &dev_priv->ggtt;
if (unlikely(ggtt->do_idle_maps)) {
drm/i915: Provide a timeout to i915_gem_wait_for_idle() Usually we have no idea about the upper bound we need to wait to catch up with userspace when idling the device, but in a few situations we know the system was idle beforehand and can provide a short timeout in order to very quickly catch a failure, long before hangcheck kicks in. In the following patches, we will use the timeout to curtain two overly long waits, where we know we can expect the GPU to complete within a reasonable time or declare it broken. In particular, with a broken GPU we expect it to fail during the initial GPU setup where do a couple of context switches to record the defaults. This is a task that takes a few milliseconds even on the slowest of devices, but we may have to wait 60s for hangcheck to give in and declare the machine inoperable. In this a case where any gpu hang is unacceptable, both from a timeliness and practical standpoint. The other improvement is that in selftests, we do not need to arm an independent timer to inject a wedge, as we can just limit the timeout on the wait directly. v2: Include the timeout parameter in the trace. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709122044.7028-1-chris@chris-wilson.co.uk
2018-07-09 19:20:42 +07:00
if (i915_gem_wait_for_idle(dev_priv, 0, MAX_SCHEDULE_TIMEOUT)) {
DRM_ERROR("Failed to wait for idle; VT'd may hang.\n");
/* Wait a bit, in hopes it avoids the hang */
udelay(10);
}
}
dma_unmap_sg(kdev, pages->sgl, pages->nents, PCI_DMA_BIDIRECTIONAL);
}
static int ggtt_set_pages(struct i915_vma *vma)
{
int ret;
GEM_BUG_ON(vma->pages);
ret = i915_get_ggtt_vma_pages(vma);
if (ret)
return ret;
vma->page_sizes = vma->obj->mm.page_sizes;
return 0;
}
static void i915_ggtt_color_adjust(const struct drm_mm_node *node,
unsigned long color,
u64 *start,
u64 *end)
{
if (i915_node_color_differs(node, color))
*start += I915_GTT_PAGE_SIZE;
/* Also leave a space between the unallocated reserved node after the
* GTT and any objects within the GTT, i.e. we use the color adjustment
* to insert a guard page to prevent prefetches crossing over the
* GTT boundary.
*/
node = list_next_entry(node, node_list);
if (node->color != color)
*end -= I915_GTT_PAGE_SIZE;
}
static int init_aliasing_ppgtt(struct i915_ggtt *ggtt)
{
struct i915_ppgtt *ppgtt;
int err;
ppgtt = i915_ppgtt_create(ggtt->vm.i915);
if (IS_ERR(ppgtt))
return PTR_ERR(ppgtt);
if (GEM_WARN_ON(ppgtt->vm.total < ggtt->vm.total)) {
err = -ENODEV;
goto err_ppgtt;
}
/*
* Note we only pre-allocate as far as the end of the global
* GTT. On 48b / 4-level page-tables, the difference is very,
* very significant! We have to preallocate as GVT/vgpu does
* not like the page directory disappearing.
*/
err = ppgtt->vm.allocate_va_range(&ppgtt->vm, 0, ggtt->vm.total);
if (err)
goto err_ppgtt;
ggtt->alias = ppgtt;
GEM_BUG_ON(ggtt->vm.vma_ops.bind_vma != ggtt_bind_vma);
ggtt->vm.vma_ops.bind_vma = aliasing_gtt_bind_vma;
GEM_BUG_ON(ggtt->vm.vma_ops.unbind_vma != ggtt_unbind_vma);
ggtt->vm.vma_ops.unbind_vma = aliasing_gtt_unbind_vma;
ppgtt->vm.total = ggtt->vm.total;
return 0;
err_ppgtt:
i915_vm_put(&ppgtt->vm);
return err;
}
static void fini_aliasing_ppgtt(struct i915_ggtt *ggtt)
{
struct drm_i915_private *i915 = ggtt->vm.i915;
struct i915_ppgtt *ppgtt;
mutex_lock(&i915->drm.struct_mutex);
ppgtt = fetch_and_zero(&ggtt->alias);
if (!ppgtt)
goto out;
i915_vm_put(&ppgtt->vm);
ggtt->vm.vma_ops.bind_vma = ggtt_bind_vma;
ggtt->vm.vma_ops.unbind_vma = ggtt_unbind_vma;
out:
mutex_unlock(&i915->drm.struct_mutex);
}
static int ggtt_reserve_guc_top(struct i915_ggtt *ggtt)
{
u64 size;
int ret;
if (!USES_GUC(ggtt->vm.i915))
return 0;
GEM_BUG_ON(ggtt->vm.total <= GUC_GGTT_TOP);
size = ggtt->vm.total - GUC_GGTT_TOP;
ret = i915_gem_gtt_reserve(&ggtt->vm, &ggtt->uc_fw, size,
GUC_GGTT_TOP, I915_COLOR_UNEVICTABLE,
PIN_NOEVICT);
if (ret)
DRM_DEBUG_DRIVER("Failed to reserve top of GGTT for GuC\n");
return ret;
}
static void ggtt_release_guc_top(struct i915_ggtt *ggtt)
{
if (drm_mm_node_allocated(&ggtt->uc_fw))
drm_mm_remove_node(&ggtt->uc_fw);
}
static void cleanup_init_ggtt(struct i915_ggtt *ggtt)
{
ggtt_release_guc_top(ggtt);
drm_mm_remove_node(&ggtt->error_capture);
}
static int init_ggtt(struct i915_ggtt *ggtt)
{
/* Let GEM Manage all of the aperture.
*
* However, leave one page at the end still bound to the scratch page.
* There are a number of places where the hardware apparently prefetches
* past the end of the object, and we've seen multiple hangs with the
* GPU head pointer stuck in a batchbuffer bound at the last page of the
* aperture. One page should be enough to keep any prefetching inside
* of the aperture.
*/
unsigned long hole_start, hole_end;
struct drm_mm_node *entry;
int ret;
drm/i915/guc: Move the pin bias value from GuC to GGTT Removing the pin bias from GuC allows us to not check for GuC every time we pin a context, which fixes the assertion error on unresolved GuC platform default in mock contexts selftest. It also seems that we were using uninitialized WOPCM variables when setting the GuC pin bias. The pin bias has to be set after the WOPCM, but before the call to i915_gem_contexts_init where the first contexts are pinned. v2: This also makes it so that there's no need to set GuC variables from within the WOPCM init function or to move the WOPCM init, while keeping the correct initialization order. Also for mock tests the pin bias is left at 0 and we make sure that the pin bias with GuC will not be smaller than without GuC. v3: Avoid unused i915 in intel_guc_ggtt_offset if debug is disabled. v4: Squash with WOPCM init reordering. Moved the i915_ggtt_pin_bias helper to this patch, and made some functions use it instead of directly dereferencing i915->ggtt. v5: Since we now don't use wopcm.guc.base for the pin bias there's no need to validate it. It also has already been verified in WOPCM init. v6: Deleted the now unnecessarily introduced includes from previous versions. Dropped naming changes from dev_priv to i915 for better patch readability. v7: Changed some comments to make more sense in the context they're in. v8: Moved and renamed the function which now returns the wopcm.guc.size to intel_guc.c:intel_guc_reserved_gtt_size to avoid any possible confusion with the pin_bias in ggtt, which should be used for pinning. Fixed patch not applying or the most recent upstream. Fixes: f7dc0157e4b5 ("drm/i915/uc: Fetch GuC/HuC firmwares from guc/huc specific init") Testcase: igt/drv_selftest/mock_contexts #GuC Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-3-jakub.bartminski@intel.com
2018-07-27 21:11:45 +07:00
/*
* GuC requires all resources that we're sharing with it to be placed in
* non-WOPCM memory. If GuC is not present or not in use we still need a
* small bias as ring wraparound at offset 0 sometimes hangs. No idea
* why.
*/
ggtt->pin_bias = max_t(u32, I915_GTT_PAGE_SIZE,
intel_wopcm_guc_size(&ggtt->vm.i915->wopcm));
drm/i915/guc: Move the pin bias value from GuC to GGTT Removing the pin bias from GuC allows us to not check for GuC every time we pin a context, which fixes the assertion error on unresolved GuC platform default in mock contexts selftest. It also seems that we were using uninitialized WOPCM variables when setting the GuC pin bias. The pin bias has to be set after the WOPCM, but before the call to i915_gem_contexts_init where the first contexts are pinned. v2: This also makes it so that there's no need to set GuC variables from within the WOPCM init function or to move the WOPCM init, while keeping the correct initialization order. Also for mock tests the pin bias is left at 0 and we make sure that the pin bias with GuC will not be smaller than without GuC. v3: Avoid unused i915 in intel_guc_ggtt_offset if debug is disabled. v4: Squash with WOPCM init reordering. Moved the i915_ggtt_pin_bias helper to this patch, and made some functions use it instead of directly dereferencing i915->ggtt. v5: Since we now don't use wopcm.guc.base for the pin bias there's no need to validate it. It also has already been verified in WOPCM init. v6: Deleted the now unnecessarily introduced includes from previous versions. Dropped naming changes from dev_priv to i915 for better patch readability. v7: Changed some comments to make more sense in the context they're in. v8: Moved and renamed the function which now returns the wopcm.guc.size to intel_guc.c:intel_guc_reserved_gtt_size to avoid any possible confusion with the pin_bias in ggtt, which should be used for pinning. Fixed patch not applying or the most recent upstream. Fixes: f7dc0157e4b5 ("drm/i915/uc: Fetch GuC/HuC firmwares from guc/huc specific init") Testcase: igt/drv_selftest/mock_contexts #GuC Signed-off-by: Jakub Bartmiński <jakub.bartminski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20180727141148.30874-3-jakub.bartminski@intel.com
2018-07-27 21:11:45 +07:00
ret = intel_vgt_balloon(ggtt);
if (ret)
return ret;
/* Reserve a mappable slot for our lockless error capture */
ret = drm_mm_insert_node_in_range(&ggtt->vm.mm, &ggtt->error_capture,
drm: Improve drm_mm search (and fix topdown allocation) with rbtrees The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03 04:04:38 +07:00
PAGE_SIZE, 0, I915_COLOR_UNEVICTABLE,
0, ggtt->mappable_end,
DRM_MM_INSERT_LOW);
if (ret)
return ret;
/*
* The upper portion of the GuC address space has a sizeable hole
* (several MB) that is inaccessible by GuC. Reserve this range within
* GGTT as it can comfortably hold GuC/HuC firmware images.
*/
ret = ggtt_reserve_guc_top(ggtt);
if (ret)
goto err;
/* Clear any non-preallocated blocks */
drm_mm_for_each_hole(entry, &ggtt->vm.mm, hole_start, hole_end) {
DRM_DEBUG_KMS("clearing unused GTT space: [%lx, %lx]\n",
hole_start, hole_end);
ggtt->vm.clear_range(&ggtt->vm, hole_start,
hole_end - hole_start);
}
/* And finally clear the reserved guard page */
ggtt->vm.clear_range(&ggtt->vm, ggtt->vm.total - PAGE_SIZE, PAGE_SIZE);
return 0;
err:
cleanup_init_ggtt(ggtt);
return ret;
}
int i915_init_ggtt(struct drm_i915_private *i915)
{
int ret;
ret = init_ggtt(&i915->ggtt);
if (ret)
return ret;
if (INTEL_PPGTT(i915) == INTEL_PPGTT_ALIASING) {
ret = init_aliasing_ppgtt(&i915->ggtt);
if (ret)
cleanup_init_ggtt(&i915->ggtt);
}
return 0;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
}
static void ggtt_cleanup_hw(struct i915_ggtt *ggtt)
{
struct drm_i915_private *i915 = ggtt->vm.i915;
struct i915_vma *vma, *vn;
ggtt->vm.closed = true;
rcu_barrier(); /* flush the RCU'ed__i915_vm_release */
flush_workqueue(i915->wq);
mutex_lock(&i915->drm.struct_mutex);
drm/i915: Stop tracking MRU activity on VMA Our goal is to remove struct_mutex and replace it with fine grained locking. One of the thorny issues is our eviction logic for reclaiming space for an execbuffer (or GTT mmaping, among a few other examples). While eviction itself is easy to move under a per-VM mutex, performing the activity tracking is less agreeable. One solution is not to do any MRU tracking and do a simple coarse evaluation during eviction of active/inactive, with a loose temporal ordering of last insertion/evaluation. That keeps all the locking constrained to when we are manipulating the VM itself, neatly avoiding the tricky handling of possible recursive locking during execbuf and elsewhere. Note that discarding the MRU (currently implemented as a pair of lists, to avoid scanning the active list for a NONBLOCKING search) is unlikely to impact upon our efficiency to reclaim VM space (where we think a LRU model is best) as our current strategy is to use random idle replacement first before doing a search, and over time the use of softpinned 48b per-ppGTT is growing (thereby eliminating any need to perform any eviction searches, in theory at least) with the remaining users being found on much older devices (gen2-gen6). v2: Changelog and commentary rewritten to elaborate on the duality of a single list being both an inactive and active list. v3: Consolidate bool parameters into a single set of flags; don't comment on the duality of a single variable being a multiplicity of bits. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-1-chris@chris-wilson.co.uk
2019-01-28 17:23:52 +07:00
list_for_each_entry_safe(vma, vn, &ggtt->vm.bound_list, vm_link)
WARN_ON(i915_vma_unbind(vma));
if (drm_mm_node_allocated(&ggtt->error_capture))
drm_mm_remove_node(&ggtt->error_capture);
ggtt_release_guc_top(ggtt);
if (drm_mm_initialized(&ggtt->vm.mm)) {
intel_vgt_deballoon(ggtt);
i915_address_space_fini(&ggtt->vm);
}
ggtt->vm.cleanup(&ggtt->vm);
mutex_unlock(&i915->drm.struct_mutex);
arch_phys_wc_del(ggtt->mtrr);
io_mapping_fini(&ggtt->iomap);
}
/**
* i915_ggtt_driver_release - Clean up GGTT hardware initialization
* @i915: i915 device
*/
void i915_ggtt_driver_release(struct drm_i915_private *i915)
{
struct pagevec *pvec;
fini_aliasing_ppgtt(&i915->ggtt);
ggtt_cleanup_hw(&i915->ggtt);
pvec = &i915->mm.wc_stash.pvec;
if (pvec->nr) {
set_pages_array_wb(pvec->pages, pvec->nr);
__pagevec_release(pvec);
}
i915_gem_cleanup_stolen(i915);
}
static unsigned int gen6_get_total_gtt_size(u16 snb_gmch_ctl)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
{
snb_gmch_ctl >>= SNB_GMCH_GGMS_SHIFT;
snb_gmch_ctl &= SNB_GMCH_GGMS_MASK;
return snb_gmch_ctl << 20;
}
static unsigned int gen8_get_total_gtt_size(u16 bdw_gmch_ctl)
{
bdw_gmch_ctl >>= BDW_GMCH_GGMS_SHIFT;
bdw_gmch_ctl &= BDW_GMCH_GGMS_MASK;
if (bdw_gmch_ctl)
bdw_gmch_ctl = 1 << bdw_gmch_ctl;
#ifdef CONFIG_X86_32
/* Limit 32b platforms to a 2GB GGTT: 4 << 20 / pte size * I915_GTT_PAGE_SIZE */
if (bdw_gmch_ctl > 4)
bdw_gmch_ctl = 4;
#endif
return bdw_gmch_ctl << 20;
}
static unsigned int chv_get_total_gtt_size(u16 gmch_ctrl)
{
gmch_ctrl >>= SNB_GMCH_GGMS_SHIFT;
gmch_ctrl &= SNB_GMCH_GGMS_MASK;
if (gmch_ctrl)
return 1 << (20 + gmch_ctrl);
return 0;
}
static int ggtt_probe_common(struct i915_ggtt *ggtt, u64 size)
{
struct drm_i915_private *dev_priv = ggtt->vm.i915;
struct pci_dev *pdev = dev_priv->drm.pdev;
phys_addr_t phys_addr;
int ret;
/* For Modern GENs the PTEs and register space are split in the BAR */
phys_addr = pci_resource_start(pdev, 0) + pci_resource_len(pdev, 0) / 2;
/*
* On BXT+/CNL+ writes larger than 64 bit to the GTT pagetable range
* will be dropped. For WC mappings in general we have 64 byte burst
* writes when the WC buffer is flushed, so we can't use it, but have to
* resort to an uncached mapping. The WC issue is easily caught by the
* readback check when writing GTT PTE entries.
*/
if (IS_GEN9_LP(dev_priv) || INTEL_GEN(dev_priv) >= 10)
ggtt->gsm = ioremap_nocache(phys_addr, size);
else
ggtt->gsm = ioremap_wc(phys_addr, size);
if (!ggtt->gsm) {
DRM_ERROR("Failed to map the ggtt page table\n");
return -ENOMEM;
}
ret = setup_scratch_page(&ggtt->vm, GFP_DMA32);
if (ret) {
DRM_ERROR("Scratch setup failed\n");
/* iounmap will also get called at remove, but meh */
iounmap(ggtt->gsm);
return ret;
}
ggtt->vm.scratch[0].encode =
ggtt->vm.pte_encode(px_dma(&ggtt->vm.scratch[0]),
I915_CACHE_NONE, 0);
return 0;
}
static void tgl_setup_private_ppat(struct drm_i915_private *dev_priv)
{
/* TGL doesn't support LLC or AGE settings */
I915_WRITE(GEN12_PAT_INDEX(0), GEN8_PPAT_WB);
I915_WRITE(GEN12_PAT_INDEX(1), GEN8_PPAT_WC);
I915_WRITE(GEN12_PAT_INDEX(2), GEN8_PPAT_WT);
I915_WRITE(GEN12_PAT_INDEX(3), GEN8_PPAT_UC);
I915_WRITE(GEN12_PAT_INDEX(4), GEN8_PPAT_WB);
I915_WRITE(GEN12_PAT_INDEX(5), GEN8_PPAT_WB);
I915_WRITE(GEN12_PAT_INDEX(6), GEN8_PPAT_WB);
I915_WRITE(GEN12_PAT_INDEX(7), GEN8_PPAT_WB);
}
static void cnl_setup_private_ppat(struct drm_i915_private *dev_priv)
{
I915_WRITE(GEN10_PAT_INDEX(0), GEN8_PPAT_WB | GEN8_PPAT_LLC);
I915_WRITE(GEN10_PAT_INDEX(1), GEN8_PPAT_WC | GEN8_PPAT_LLCELLC);
I915_WRITE(GEN10_PAT_INDEX(2), GEN8_PPAT_WT | GEN8_PPAT_LLCELLC);
I915_WRITE(GEN10_PAT_INDEX(3), GEN8_PPAT_UC);
I915_WRITE(GEN10_PAT_INDEX(4), GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(0));
I915_WRITE(GEN10_PAT_INDEX(5), GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(1));
I915_WRITE(GEN10_PAT_INDEX(6), GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(2));
I915_WRITE(GEN10_PAT_INDEX(7), GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(3));
}
/* The GGTT and PPGTT need a private PPAT setup in order to handle cacheability
* bits. When using advanced contexts each context stores its own PAT, but
* writing this data shouldn't be harmful even in those cases. */
static void bdw_setup_private_ppat(struct drm_i915_private *dev_priv)
{
u64 pat;
pat = GEN8_PPAT(0, GEN8_PPAT_WB | GEN8_PPAT_LLC) | /* for normal objects, no eLLC */
GEN8_PPAT(1, GEN8_PPAT_WC | GEN8_PPAT_LLCELLC) | /* for something pointing to ptes? */
GEN8_PPAT(2, GEN8_PPAT_WT | GEN8_PPAT_LLCELLC) | /* for scanout with eLLC */
GEN8_PPAT(3, GEN8_PPAT_UC) | /* Uncached objects, mostly for scanout */
GEN8_PPAT(4, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(0)) |
GEN8_PPAT(5, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(1)) |
GEN8_PPAT(6, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(2)) |
GEN8_PPAT(7, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(3));
I915_WRITE(GEN8_PRIVATE_PAT_LO, lower_32_bits(pat));
I915_WRITE(GEN8_PRIVATE_PAT_HI, upper_32_bits(pat));
}
static void chv_setup_private_ppat(struct drm_i915_private *dev_priv)
{
u64 pat;
/*
* Map WB on BDW to snooped on CHV.
*
* Only the snoop bit has meaning for CHV, the rest is
* ignored.
*
* The hardware will never snoop for certain types of accesses:
* - CPU GTT (GMADR->GGTT->no snoop->memory)
* - PPGTT page tables
* - some other special cycles
*
* As with BDW, we also need to consider the following for GT accesses:
* "For GGTT, there is NO pat_sel[2:0] from the entry,
* so RTL will always use the value corresponding to
* pat_sel = 000".
* Which means we must set the snoop bit in PAT entry 0
* in order to keep the global status page working.
*/
pat = GEN8_PPAT(0, CHV_PPAT_SNOOP) |
GEN8_PPAT(1, 0) |
GEN8_PPAT(2, 0) |
GEN8_PPAT(3, 0) |
GEN8_PPAT(4, CHV_PPAT_SNOOP) |
GEN8_PPAT(5, CHV_PPAT_SNOOP) |
GEN8_PPAT(6, CHV_PPAT_SNOOP) |
GEN8_PPAT(7, CHV_PPAT_SNOOP);
I915_WRITE(GEN8_PRIVATE_PAT_LO, lower_32_bits(pat));
I915_WRITE(GEN8_PRIVATE_PAT_HI, upper_32_bits(pat));
}
static void gen6_gmch_remove(struct i915_address_space *vm)
{
struct i915_ggtt *ggtt = i915_vm_to_ggtt(vm);
iounmap(ggtt->gsm);
cleanup_scratch_page(vm);
}
static void setup_private_pat(struct drm_i915_private *dev_priv)
{
GEM_BUG_ON(INTEL_GEN(dev_priv) < 8);
if (INTEL_GEN(dev_priv) >= 12)
tgl_setup_private_ppat(dev_priv);
else if (INTEL_GEN(dev_priv) >= 10)
cnl_setup_private_ppat(dev_priv);
else if (IS_CHERRYVIEW(dev_priv) || IS_GEN9_LP(dev_priv))
chv_setup_private_ppat(dev_priv);
else
bdw_setup_private_ppat(dev_priv);
}
static int gen8_gmch_probe(struct i915_ggtt *ggtt)
{
struct drm_i915_private *dev_priv = ggtt->vm.i915;
struct pci_dev *pdev = dev_priv->drm.pdev;
unsigned int size;
u16 snb_gmch_ctl;
int err;
/* TODO: We're not aware of mappable constraints on gen8 yet */
ggtt->gmadr =
(struct resource) DEFINE_RES_MEM(pci_resource_start(pdev, 2),
pci_resource_len(pdev, 2));
ggtt->mappable_end = resource_size(&ggtt->gmadr);
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(39));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(39));
if (err)
DRM_ERROR("Can't set DMA mask/consistent mask (%d)\n", err);
pci_read_config_word(pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
if (IS_CHERRYVIEW(dev_priv))
size = chv_get_total_gtt_size(snb_gmch_ctl);
else
size = gen8_get_total_gtt_size(snb_gmch_ctl);
ggtt->vm.total = (size / sizeof(gen8_pte_t)) * I915_GTT_PAGE_SIZE;
ggtt->vm.cleanup = gen6_gmch_remove;
ggtt->vm.insert_page = gen8_ggtt_insert_page;
ggtt->vm.clear_range = nop_clear_range;
if (intel_scanout_needs_vtd_wa(dev_priv))
ggtt->vm.clear_range = gen8_ggtt_clear_range;
ggtt->vm.insert_entries = gen8_ggtt_insert_entries;
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
/* Serialize GTT updates with aperture access on BXT if VT-d is on. */
drm/i915: Prevent concurrent GGTT update and use on Braswell (again) On Braswell, under heavy stress, if we update the GGTT while simultaneously accessing another region inside the GTT, we are returned the wrong values. To prevent this we stop the machine to update the GGTT entries so that no memory traffic can occur at the same time. This was first spotted in commit 5bab6f60cb4d1417ad7c599166bcfec87529c1a2 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Fri Oct 23 18:43:32 2015 +0100 drm/i915: Serialise updates to GGTT with access through GGTT on Braswell but removed again in forlorn hope with commit 4509276ee824bb967885c095c610767e42345c36 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Mon Feb 20 12:47:18 2017 +0000 drm/i915: Remove Braswell GGTT update w/a However, gem_concurrent_blit is once again only stable with the patch applied and CI is detecting the odd failure in forked gem_mmap_gtt tests (which smell like the same issue). Fwiw, a wide variety of CPU memory barriers (around GGTT flushing, fence updates, PTE updates) and GPU flushes/invalidates (between requests, after PTE updates) were tried as part of the investigation to find an alternate cause, nothing comes close to serialised GGTT updates. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105591 Testcase: igt/gem_concurrent_blit Testcase: igt/gem_mmap_gtt/*forked* References: 5bab6f60cb4d ("drm/i915: Serialise updates to GGTT with access through GGTT on Braswell") References: 4509276ee824 ("drm/i915: Remove Braswell GGTT update w/a") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190114211729.30352-1-chris@chris-wilson.co.uk
2019-01-15 04:17:27 +07:00
if (intel_ggtt_update_needs_vtd_wa(dev_priv) ||
IS_CHERRYVIEW(dev_priv) /* fails with concurrent use/update */) {
ggtt->vm.insert_entries = bxt_vtd_ggtt_insert_entries__BKL;
ggtt->vm.insert_page = bxt_vtd_ggtt_insert_page__BKL;
if (ggtt->vm.clear_range != nop_clear_range)
ggtt->vm.clear_range = bxt_vtd_ggtt_clear_range__BKL;
drm/i915: Serialize GTT/Aperture accesses on BXT BXT has a H/W issue with IOMMU which can lead to system hangs when Aperture accesses are queued within the GAM behind GTT Accesses. This patch avoids the condition by wrapping all GTT updates in stop_machine and using a flushing read prior to restarting the machine. The stop_machine guarantees no new Aperture accesses can begin while the PTE writes are being emmitted. The flushing read ensures that any following Aperture accesses cannot begin until the PTE writes have been cleared out of the GAM's fifo. Only FOLLOWING Aperture accesses need to be separated from in flight PTE updates. PTE Writes may follow tightly behind already in flight Aperture accesses, so no flushing read is required at the start of a PTE update sequence. This issue was reproduced by running igt/gem_readwrite and igt/gem_render_copy simultaneously from different processes, each in a tight loop, with INTEL_IOMMU enabled. This patch was originally published as: drm/i915: Serialize GTT Updates on BXT v2: Move bxt/iommu detection into static function Remove #ifdef CONFIG_INTEL_IOMMU protection Make function names more reflective of purpose Move flushing read into static function v3: Tidy up for checkpatch.pl Testcase: igt/gem_concurrent_blit Signed-off-by: Jon Bloomfield <jon.bloomfield@intel.com> Cc: John Harrison <john.C.Harrison@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1495641251-30022-1-git-send-email-jon.bloomfield@intel.com Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-05-24 22:54:11 +07:00
}
ggtt->invalidate = gen6_ggtt_invalidate;
ggtt->vm.vma_ops.bind_vma = ggtt_bind_vma;
ggtt->vm.vma_ops.unbind_vma = ggtt_unbind_vma;
ggtt->vm.vma_ops.set_pages = ggtt_set_pages;
ggtt->vm.vma_ops.clear_pages = clear_pages;
ggtt->vm.pte_encode = gen8_pte_encode;
setup_private_pat(dev_priv);
return ggtt_probe_common(ggtt, size);
}
static int gen6_gmch_probe(struct i915_ggtt *ggtt)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
{
struct drm_i915_private *dev_priv = ggtt->vm.i915;
struct pci_dev *pdev = dev_priv->drm.pdev;
unsigned int size;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
u16 snb_gmch_ctl;
int err;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
ggtt->gmadr =
(struct resource) DEFINE_RES_MEM(pci_resource_start(pdev, 2),
pci_resource_len(pdev, 2));
ggtt->mappable_end = resource_size(&ggtt->gmadr);
/* 64/512MB is the current min/max we actually know of, but this is just
* a coarse sanity check.
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
*/
if (ggtt->mappable_end < (64<<20) || ggtt->mappable_end > (512<<20)) {
DRM_ERROR("Unknown GMADR size (%pa)\n", &ggtt->mappable_end);
return -ENXIO;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
}
err = pci_set_dma_mask(pdev, DMA_BIT_MASK(40));
if (!err)
err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(40));
if (err)
DRM_ERROR("Can't set DMA mask/consistent mask (%d)\n", err);
pci_read_config_word(pdev, SNB_GMCH_CTRL, &snb_gmch_ctl);
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
size = gen6_get_total_gtt_size(snb_gmch_ctl);
ggtt->vm.total = (size / sizeof(gen6_pte_t)) * I915_GTT_PAGE_SIZE;
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
ggtt->vm.clear_range = nop_clear_range;
if (!HAS_FULL_PPGTT(dev_priv) || intel_scanout_needs_vtd_wa(dev_priv))
ggtt->vm.clear_range = gen6_ggtt_clear_range;
ggtt->vm.insert_page = gen6_ggtt_insert_page;
ggtt->vm.insert_entries = gen6_ggtt_insert_entries;
ggtt->vm.cleanup = gen6_gmch_remove;
ggtt->invalidate = gen6_ggtt_invalidate;
if (HAS_EDRAM(dev_priv))
ggtt->vm.pte_encode = iris_pte_encode;
else if (IS_HASWELL(dev_priv))
ggtt->vm.pte_encode = hsw_pte_encode;
else if (IS_VALLEYVIEW(dev_priv))
ggtt->vm.pte_encode = byt_pte_encode;
else if (INTEL_GEN(dev_priv) >= 7)
ggtt->vm.pte_encode = ivb_pte_encode;
else
ggtt->vm.pte_encode = snb_pte_encode;
ggtt->vm.vma_ops.bind_vma = ggtt_bind_vma;
ggtt->vm.vma_ops.unbind_vma = ggtt_unbind_vma;
ggtt->vm.vma_ops.set_pages = ggtt_set_pages;
ggtt->vm.vma_ops.clear_pages = clear_pages;
return ggtt_probe_common(ggtt, size);
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
}
static void i915_gmch_remove(struct i915_address_space *vm)
drm/i915: Stop using AGP layer for GEN6+ As a quick hack we make the old intel_gtt structure mutable so we can fool a bunch of the existing code which depends on elements in that data structure. We can/should try to remove this in a subsequent patch. This should preserve the old gtt init behavior which upon writing these patches seems incorrect. The next patch will fix these things. The one exception is VLV which doesn't have the preserved flush control write behavior. Since we want to do that for all GEN6+ stuff, we'll handle that in a later patch. Mainstream VLV support doesn't actually exist yet anyway. v2: Update the comment to remove the "voodoo" Check that the last pte written matches what we readback v3: actually kill cache_level_to_agp_type since most of the flags will disappear in an upcoming patch v4: v3 was actually not what we wanted (Daniel) Make the ggtt bind assertions better and stricter (Chris) Fix some uncaught errors at gtt init (Chris) Some other random stuff that Chris wanted v5: check for i==0 in gen6_ggtt_bind_object to shut up gcc (Ben) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by [v4]: Chris Wilson <chris@chris-wilson.co.uk> [danvet: Make the cache_level -> agp_flags conversion for pre-gen6 a tad more robust by mapping everything != CACHE_NONE to the cached agp flag - we have a 1:1 uncached mapping, but different modes of cacheable (at least on later generations). Suggested by Chris Wilson.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-11-05 00:21:27 +07:00
{
intel_gmch_remove();
}
static int i915_gmch_probe(struct i915_ggtt *ggtt)
{
struct drm_i915_private *dev_priv = ggtt->vm.i915;
phys_addr_t gmadr_base;
int ret;
ret = intel_gmch_probe(dev_priv->bridge_dev, dev_priv->drm.pdev, NULL);
if (!ret) {
DRM_ERROR("failed to set up gmch\n");
return -EIO;
}
intel_gtt_get(&ggtt->vm.total, &gmadr_base, &ggtt->mappable_end);
ggtt->gmadr =
(struct resource) DEFINE_RES_MEM(gmadr_base,
ggtt->mappable_end);
ggtt->do_idle_maps = needs_idle_maps(dev_priv);
ggtt->vm.insert_page = i915_ggtt_insert_page;
ggtt->vm.insert_entries = i915_ggtt_insert_entries;
ggtt->vm.clear_range = i915_ggtt_clear_range;
ggtt->vm.cleanup = i915_gmch_remove;
ggtt->invalidate = gmch_ggtt_invalidate;
ggtt->vm.vma_ops.bind_vma = ggtt_bind_vma;
ggtt->vm.vma_ops.unbind_vma = ggtt_unbind_vma;
ggtt->vm.vma_ops.set_pages = ggtt_set_pages;
ggtt->vm.vma_ops.clear_pages = clear_pages;
if (unlikely(ggtt->do_idle_maps))
dev_notice(dev_priv->drm.dev,
"Applying Ironlake quirks for intel_iommu\n");
return 0;
}
static int ggtt_probe_hw(struct i915_ggtt *ggtt, struct intel_gt *gt)
{
struct drm_i915_private *i915 = gt->i915;
int ret;
ggtt->vm.gt = gt;
ggtt->vm.i915 = i915;
ggtt->vm.dma = &i915->drm.pdev->dev;
if (INTEL_GEN(i915) <= 5)
ret = i915_gmch_probe(ggtt);
else if (INTEL_GEN(i915) < 8)
ret = gen6_gmch_probe(ggtt);
else
ret = gen8_gmch_probe(ggtt);
if (ret)
return ret;
if ((ggtt->vm.total - 1) >> 32) {
DRM_ERROR("We never expected a Global GTT with more than 32bits"
" of address space! Found %lldM!\n",
ggtt->vm.total >> 20);
ggtt->vm.total = 1ULL << 32;
ggtt->mappable_end =
min_t(u64, ggtt->mappable_end, ggtt->vm.total);
}
if (ggtt->mappable_end > ggtt->vm.total) {
DRM_ERROR("mappable aperture extends past end of GGTT,"
" aperture=%pa, total=%llx\n",
&ggtt->mappable_end, ggtt->vm.total);
ggtt->mappable_end = ggtt->vm.total;
}
/* GMADR is the PCI mmio aperture into the global GTT. */
DRM_DEBUG_DRIVER("GGTT size = %lluM\n", ggtt->vm.total >> 20);
DRM_DEBUG_DRIVER("GMADR size = %lluM\n", (u64)ggtt->mappable_end >> 20);
DRM_DEBUG_DRIVER("DSM size = %lluM\n",
(u64)resource_size(&intel_graphics_stolen_res) >> 20);
return 0;
}
/**
* i915_ggtt_probe_hw - Probe GGTT hardware location
* @i915: i915 device
*/
int i915_ggtt_probe_hw(struct drm_i915_private *i915)
{
int ret;
ret = ggtt_probe_hw(&i915->ggtt, &i915->gt);
if (ret)
return ret;
if (intel_vtd_active())
dev_info(i915->drm.dev, "VT-d active for gfx access\n");
return 0;
}
static int ggtt_init_hw(struct i915_ggtt *ggtt)
{
struct drm_i915_private *i915 = ggtt->vm.i915;
int ret = 0;
mutex_lock(&i915->drm.struct_mutex);
i915_address_space_init(&ggtt->vm, VM_CLASS_GGTT);
ggtt->vm.is_ggtt = true;
/* Only VLV supports read-only GGTT mappings */
ggtt->vm.has_read_only = IS_VALLEYVIEW(i915);
if (!HAS_LLC(i915) && !HAS_PPGTT(i915))
ggtt->vm.mm.color_adjust = i915_ggtt_color_adjust;
if (!io_mapping_init_wc(&ggtt->iomap,
ggtt->gmadr.start,
ggtt->mappable_end)) {
ggtt->vm.cleanup(&ggtt->vm);
ret = -EIO;
goto out;
}
ggtt->mtrr = arch_phys_wc_add(ggtt->gmadr.start, ggtt->mappable_end);
i915_ggtt_init_fences(ggtt);
out:
mutex_unlock(&i915->drm.struct_mutex);
return ret;
}
/**
* i915_ggtt_init_hw - Initialize GGTT hardware
* @dev_priv: i915 device
*/
int i915_ggtt_init_hw(struct drm_i915_private *dev_priv)
{
int ret;
stash_init(&dev_priv->mm.wc_stash);
/* Note that we use page colouring to enforce a guard page at the
* end of the address space. This is required as the CS may prefetch
* beyond the end of the batch buffer, across the page boundary,
* and beyond the end of the GTT if we do not provide a guard.
*/
ret = ggtt_init_hw(&dev_priv->ggtt);
if (ret)
return ret;
/*
* Initialise stolen early so that we may reserve preallocated
* objects for the BIOS to KMS transition.
*/
ret = i915_gem_init_stolen(dev_priv);
if (ret)
goto out_gtt_cleanup;
return 0;
out_gtt_cleanup:
dev_priv->ggtt.vm.cleanup(&dev_priv->ggtt.vm);
return ret;
}
drm/i915: Create bind/unbind abstraction for VMAs To sum up what goes on here, we abstract the vma binding, similarly to the previous object binding. This helps for distinguishing legacy binding, versus modern binding. To keep the code churn as minimal as possible, I am leaving in insert_entries(). It serves as the per platform pte writing basically. bind_vma and insert_entries do share a lot of similarities, and I did have designs to combine the two, but as mentioned already... too much churn in an already massive patchset. What follows are the 3 commits which existed discretely in the original submissions. Upon rebasing on Broadwell support, it became clear that separation was not good, and only made for more error prone code. Below are the 3 commit messages with all their history. drm/i915: Add bind/unbind object functions to VMA drm/i915: Use the new vm [un]bind functions drm/i915: reduce vm->insert_entries() usage drm/i915: Add bind/unbind object functions to VMA As we plumb the code with more VM information, it has become more obvious that the easiest way to deal with bind and unbind is to simply put the function pointers in the vm, and let those choose the correct way to handle the page table updates. This change allows many places in the code to simply be vm->bind, and not have to worry about distinguishing PPGTT vs GGTT. Notice that this patch has no impact on functionality. I've decided to save the actual change until the next patch because I think it's easier to review that way. I'm happy to squash the two, or let Daniel do it on merge. v2: Make ggtt handle the quirky aliasing ppgtt Add flags to bind object to support above Don't ever call bind/unbind directly for PPGTT until we have real, full PPGTT (use NULLs to assert this) Make sure we rebind the ggtt if there already is a ggtt binding. This happens on set cache levels. Use VMA for bind/unbind (Daniel, Ben) v3: Reorganize ggtt_vma_bind to be more concise and easier to read (Ville). Change logic in unbind to only unbind ggtt when there is a global mapping, and to remove a redundant check if the aliasing ppgtt exists. v4: Make the bind function a bit smarter about the cache levels to avoid unnecessary multiple remaps. "I accept it is a wart, I think unifying the pin_vma / bind_vma could be unified later" (Chris) Removed the git notes, and put version info here. (Daniel) v5: Update the comment to not suck (Chris) v6: Move bind/unbind to the VMA. It makes more sense in the VMA structure (always has, but I was previously lazy). With this change, it will allow us to keep a distinct insert_entries. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: Use the new vm [un]bind functions Building on the last patch which created the new function pointers in the VM for bind/unbind, here we actually put those new function pointers to use. Split out as a separate patch to aid in review. I'm fine with squashing into the previous patch if people request it. v2: Updated to address the smart ggtt which can do aliasing as needed Make sure we bind to global gtt when mappable and fenceable. I thought we could get away without this initialy, but we cannot. v3: Make the global GTT binding explicitly use the ggtt VM for bind_vma(). While at it, use the new ggtt_vma helper (Chris) At this point the original mailing list thread diverges. ie. v4^: use target_obj instead of obj for gen6 relocate_entry vma->bind_vma() can be called safely during pin. So simply do that instead of the complicated conditionals. Don't restore PPGTT bound objects on resume path Bug fix in resume path for globally bound Bos Properly handle secure dispatch Rebased on vma bind/unbind conversion Signed-off-by: Ben Widawsky <ben@bwidawsk.net> drm/i915: reduce vm->insert_entries() usage FKA: drm/i915: eliminate vm->insert_entries() With bind/unbind function pointers in place, we no longer need insert_entries. We could, and want, to remove clear_range, however it's not totally easy at this point. Since it's used in a couple of place still that don't only deal in objects: setup, ppgtt init, and restore gtt mappings. v2: Don't actually remove insert_entries, just limit its usage. It will be useful when we introduce gen8. It will always be called from the vma bind/unbind. Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> (v1) Signed-off-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2013-12-07 05:10:56 +07:00
int i915_ggtt_enable_hw(struct drm_i915_private *dev_priv)
2016-05-07 01:35:55 +07:00
{
if (INTEL_GEN(dev_priv) < 6 && !intel_enable_gtt())
2016-05-07 01:35:55 +07:00
return -EIO;
return 0;
}
void i915_ggtt_enable_guc(struct i915_ggtt *ggtt)
{
GEM_BUG_ON(ggtt->invalidate != gen6_ggtt_invalidate);
ggtt->invalidate = guc_ggtt_invalidate;
ggtt->invalidate(ggtt);
}
void i915_ggtt_disable_guc(struct i915_ggtt *ggtt)
{
/* XXX Temporary pardon for error unload */
if (ggtt->invalidate == gen6_ggtt_invalidate)
return;
/* We should only be called after i915_ggtt_enable_guc() */
GEM_BUG_ON(ggtt->invalidate != guc_ggtt_invalidate);
ggtt->invalidate = gen6_ggtt_invalidate;
ggtt->invalidate(ggtt);
}
static void ggtt_restore_mappings(struct i915_ggtt *ggtt)
{
struct i915_vma *vma, *vn;
bool flush = false;
intel_gt_check_and_clear_faults(ggtt->vm.gt);
mutex_lock(&ggtt->vm.mutex);
/* First fill our portion of the GTT with scratch pages */
ggtt->vm.clear_range(&ggtt->vm, 0, ggtt->vm.total);
ggtt->vm.closed = true; /* skip rewriting PTE on VMA unbind */
drm/i915: Flush to GTT domain all GGTT bound objects after hibernation Recently I have been applying an optimisation to avoid stalling and clflushing GGTT objects based on their current binding. That is we only set-to-gtt-domain upon first bind. However, on hibernation the objects remain bound, but they are in the CPU domain. Currently (since commit 975f7ff42edf ("drm/i915: Lazily migrate the objects after hibernation")) we only flush scanout objects as all other objects are expected to be flushed prior to use. That breaks down in the face of the runtime optimisation above - and we need to flush all GGTT pinned objects (essentially ringbuffers). To reduce the burden of extra clflushes, we only flush those objects we cannot discard from the GGTT. Everything pinned to the scanout, or current contexts or ringbuffers will be flushed and rebound. Other objects, such as inactive contexts, will be left unbound and in the CPU domain until first use after resuming. Fixes: 7abc98fadfdd ("drm/i915: Only change the context object's domain...") Fixes: 57e885318119 ("drm/i915: Use VMA for ringbuffer tracking") References: https://bugs.freedesktop.org/show_bug.cgi?id=94722 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: David Weinehall <david.weinehall@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160909201957.2499-1-chris@chris-wilson.co.uk
2016-09-10 03:19:57 +07:00
/* clflush objects bound into the GGTT and rebind them. */
drm/i915: Stop tracking MRU activity on VMA Our goal is to remove struct_mutex and replace it with fine grained locking. One of the thorny issues is our eviction logic for reclaiming space for an execbuffer (or GTT mmaping, among a few other examples). While eviction itself is easy to move under a per-VM mutex, performing the activity tracking is less agreeable. One solution is not to do any MRU tracking and do a simple coarse evaluation during eviction of active/inactive, with a loose temporal ordering of last insertion/evaluation. That keeps all the locking constrained to when we are manipulating the VM itself, neatly avoiding the tricky handling of possible recursive locking during execbuf and elsewhere. Note that discarding the MRU (currently implemented as a pair of lists, to avoid scanning the active list for a NONBLOCKING search) is unlikely to impact upon our efficiency to reclaim VM space (where we think a LRU model is best) as our current strategy is to use random idle replacement first before doing a search, and over time the use of softpinned 48b per-ppGTT is growing (thereby eliminating any need to perform any eviction searches, in theory at least) with the remaining users being found on much older devices (gen2-gen6). v2: Changelog and commentary rewritten to elaborate on the duality of a single list being both an inactive and active list. v3: Consolidate bool parameters into a single set of flags; don't comment on the duality of a single variable being a multiplicity of bits. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190128102356.15037-1-chris@chris-wilson.co.uk
2019-01-28 17:23:52 +07:00
list_for_each_entry_safe(vma, vn, &ggtt->vm.bound_list, vm_link) {
struct drm_i915_gem_object *obj = vma->obj;
drm/i915: Flush to GTT domain all GGTT bound objects after hibernation Recently I have been applying an optimisation to avoid stalling and clflushing GGTT objects based on their current binding. That is we only set-to-gtt-domain upon first bind. However, on hibernation the objects remain bound, but they are in the CPU domain. Currently (since commit 975f7ff42edf ("drm/i915: Lazily migrate the objects after hibernation")) we only flush scanout objects as all other objects are expected to be flushed prior to use. That breaks down in the face of the runtime optimisation above - and we need to flush all GGTT pinned objects (essentially ringbuffers). To reduce the burden of extra clflushes, we only flush those objects we cannot discard from the GGTT. Everything pinned to the scanout, or current contexts or ringbuffers will be flushed and rebound. Other objects, such as inactive contexts, will be left unbound and in the CPU domain until first use after resuming. Fixes: 7abc98fadfdd ("drm/i915: Only change the context object's domain...") Fixes: 57e885318119 ("drm/i915: Use VMA for ringbuffer tracking") References: https://bugs.freedesktop.org/show_bug.cgi?id=94722 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: David Weinehall <david.weinehall@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160909201957.2499-1-chris@chris-wilson.co.uk
2016-09-10 03:19:57 +07:00
if (!i915_vma_is_bound(vma, I915_VMA_GLOBAL_BIND))
continue;
drm/i915: Flush to GTT domain all GGTT bound objects after hibernation Recently I have been applying an optimisation to avoid stalling and clflushing GGTT objects based on their current binding. That is we only set-to-gtt-domain upon first bind. However, on hibernation the objects remain bound, but they are in the CPU domain. Currently (since commit 975f7ff42edf ("drm/i915: Lazily migrate the objects after hibernation")) we only flush scanout objects as all other objects are expected to be flushed prior to use. That breaks down in the face of the runtime optimisation above - and we need to flush all GGTT pinned objects (essentially ringbuffers). To reduce the burden of extra clflushes, we only flush those objects we cannot discard from the GGTT. Everything pinned to the scanout, or current contexts or ringbuffers will be flushed and rebound. Other objects, such as inactive contexts, will be left unbound and in the CPU domain until first use after resuming. Fixes: 7abc98fadfdd ("drm/i915: Only change the context object's domain...") Fixes: 57e885318119 ("drm/i915: Use VMA for ringbuffer tracking") References: https://bugs.freedesktop.org/show_bug.cgi?id=94722 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: David Weinehall <david.weinehall@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160909201957.2499-1-chris@chris-wilson.co.uk
2016-09-10 03:19:57 +07:00
mutex_unlock(&ggtt->vm.mutex);
if (!i915_vma_unbind(vma))
goto lock;
WARN_ON(i915_vma_bind(vma,
obj ? obj->cache_level : 0,
PIN_UPDATE));
if (obj) { /* only used during resume => exclusive access */
flush |= fetch_and_zero(&obj->write_domain);
obj->read_domains |= I915_GEM_DOMAIN_GTT;
}
lock:
mutex_lock(&ggtt->vm.mutex);
}
ggtt->vm.closed = false;
ggtt->invalidate(ggtt);
drm/i915: Flush to GTT domain all GGTT bound objects after hibernation Recently I have been applying an optimisation to avoid stalling and clflushing GGTT objects based on their current binding. That is we only set-to-gtt-domain upon first bind. However, on hibernation the objects remain bound, but they are in the CPU domain. Currently (since commit 975f7ff42edf ("drm/i915: Lazily migrate the objects after hibernation")) we only flush scanout objects as all other objects are expected to be flushed prior to use. That breaks down in the face of the runtime optimisation above - and we need to flush all GGTT pinned objects (essentially ringbuffers). To reduce the burden of extra clflushes, we only flush those objects we cannot discard from the GGTT. Everything pinned to the scanout, or current contexts or ringbuffers will be flushed and rebound. Other objects, such as inactive contexts, will be left unbound and in the CPU domain until first use after resuming. Fixes: 7abc98fadfdd ("drm/i915: Only change the context object's domain...") Fixes: 57e885318119 ("drm/i915: Use VMA for ringbuffer tracking") References: https://bugs.freedesktop.org/show_bug.cgi?id=94722 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: David Weinehall <david.weinehall@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20160909201957.2499-1-chris@chris-wilson.co.uk
2016-09-10 03:19:57 +07:00
mutex_unlock(&ggtt->vm.mutex);
if (flush)
wbinvd_on_all_cpus();
}
void i915_gem_restore_gtt_mappings(struct drm_i915_private *i915)
{
ggtt_restore_mappings(&i915->ggtt);
if (INTEL_GEN(i915) >= 8)
setup_private_pat(i915);
}
static struct scatterlist *
rotate_pages(struct drm_i915_gem_object *obj, unsigned int offset,
unsigned int width, unsigned int height,
unsigned int stride,
struct sg_table *st, struct scatterlist *sg)
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
{
unsigned int column, row;
unsigned int src_idx;
for (column = 0; column < width; column++) {
src_idx = stride * (height - 1) + column + offset;
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
for (row = 0; row < height; row++) {
st->nents++;
/* We don't need the pages, but need to initialize
* the entries so the sg list can be happily traversed.
* The only thing we need are DMA addresses.
*/
sg_set_page(sg, NULL, I915_GTT_PAGE_SIZE, 0);
sg_dma_address(sg) =
i915_gem_object_get_dma_address(obj, src_idx);
sg_dma_len(sg) = I915_GTT_PAGE_SIZE;
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
sg = sg_next(sg);
src_idx -= stride;
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
}
}
return sg;
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
}
static noinline struct sg_table *
intel_rotate_pages(struct intel_rotation_info *rot_info,
struct drm_i915_gem_object *obj)
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
{
drm/i915: Rewrite fb rotation GTT handling Redo the fb rotation handling in order to: - eliminate the NV12 special casing - handle fb->offsets[] properly - make the rotation handling easier for the plane code To achieve these goals we reduce intel_rotation_info to only contain (for each plane) the rotated view width,height,stride in tile units, and the page offset into the object where the plane starts. Each plane is handled exactly the same way, no special casing for NV12 or other formats. We then store the computed rotation_info under intel_framebuffer so that we don't have to recompute it again. To handle fb->offsets[] we treat them as a linear offsets and convert them to x/y offsets from the start of the relevant GTT mapping (either normal or rotated). We store the x/y offsets under intel_framebuffer, and for some extra convenience we also store the rotated pitch (ie. tile aligned plane height). So for each plane we have the normal x/y offsets, rotated x/y offsets, and the rotated pitch. The normal pitch is available already in fb->pitches[]. While we're gathering up all that extra information, we can also easily compute the storage requirements for the framebuffer, so that we can check that the object is big enough to hold it. When it comes time to deal with the plane source coordinates, we first rotate the clipped src coordinates to match the relevant GTT view orientation, then add to them the fb x/y offsets. Next we compute the aligned surface page offset, and as a result we're left with some residual x/y offsets. Finally, if required by the hardware, we convert the remaining x/y offsets into a linear offset. For gen2/3 we simply skip computing the final page offset, and just convert the src+fb x/y offsets directly into a linear offset since that's what the hardware wants. After this all platforms, incluing SKL+, compute these things in exactly the same way (excluding alignemnt differences). v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating plane src coordinates Drop some spurious changes that got left behind during development v3: Split out more changes to prep patches (Daniel) s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity Rename intel_surf_gtt_offset to intel_fb_gtt_offset Kill the pointless 'plane' parameter from intel_fb_gtt_offset() v4: Fix alignment vs. alignment-1 when calling _intel_compute_tile_offset() from intel_fill_fb_info() Pass the pitch in tiles in stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info() Pass the full width/height of the rotated area to drm_rect_rotate() for clarity Use u32 for more offsets v5: Preserve the upper_32_bits()/lower_32_bits() handling for the fb ggtt offset (Sivakumar) v6: Rebase due to drm_plane_state src/dst rects Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-15 17:16:41 +07:00
unsigned int size = intel_rotation_info_size(rot_info);
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
struct sg_table *st;
struct scatterlist *sg;
int ret = -ENOMEM;
int i;
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
/* Allocate target SG list. */
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (!st)
goto err_st_alloc;
drm/i915: Rewrite fb rotation GTT handling Redo the fb rotation handling in order to: - eliminate the NV12 special casing - handle fb->offsets[] properly - make the rotation handling easier for the plane code To achieve these goals we reduce intel_rotation_info to only contain (for each plane) the rotated view width,height,stride in tile units, and the page offset into the object where the plane starts. Each plane is handled exactly the same way, no special casing for NV12 or other formats. We then store the computed rotation_info under intel_framebuffer so that we don't have to recompute it again. To handle fb->offsets[] we treat them as a linear offsets and convert them to x/y offsets from the start of the relevant GTT mapping (either normal or rotated). We store the x/y offsets under intel_framebuffer, and for some extra convenience we also store the rotated pitch (ie. tile aligned plane height). So for each plane we have the normal x/y offsets, rotated x/y offsets, and the rotated pitch. The normal pitch is available already in fb->pitches[]. While we're gathering up all that extra information, we can also easily compute the storage requirements for the framebuffer, so that we can check that the object is big enough to hold it. When it comes time to deal with the plane source coordinates, we first rotate the clipped src coordinates to match the relevant GTT view orientation, then add to them the fb x/y offsets. Next we compute the aligned surface page offset, and as a result we're left with some residual x/y offsets. Finally, if required by the hardware, we convert the remaining x/y offsets into a linear offset. For gen2/3 we simply skip computing the final page offset, and just convert the src+fb x/y offsets directly into a linear offset since that's what the hardware wants. After this all platforms, incluing SKL+, compute these things in exactly the same way (excluding alignemnt differences). v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating plane src coordinates Drop some spurious changes that got left behind during development v3: Split out more changes to prep patches (Daniel) s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity Rename intel_surf_gtt_offset to intel_fb_gtt_offset Kill the pointless 'plane' parameter from intel_fb_gtt_offset() v4: Fix alignment vs. alignment-1 when calling _intel_compute_tile_offset() from intel_fill_fb_info() Pass the pitch in tiles in stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info() Pass the full width/height of the rotated area to drm_rect_rotate() for clarity Use u32 for more offsets v5: Preserve the upper_32_bits()/lower_32_bits() handling for the fb ggtt offset (Sivakumar) v6: Rebase due to drm_plane_state src/dst rects Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-15 17:16:41 +07:00
ret = sg_alloc_table(st, size, GFP_KERNEL);
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
if (ret)
goto err_sg_alloc;
st->nents = 0;
sg = st->sgl;
drm/i915: Rewrite fb rotation GTT handling Redo the fb rotation handling in order to: - eliminate the NV12 special casing - handle fb->offsets[] properly - make the rotation handling easier for the plane code To achieve these goals we reduce intel_rotation_info to only contain (for each plane) the rotated view width,height,stride in tile units, and the page offset into the object where the plane starts. Each plane is handled exactly the same way, no special casing for NV12 or other formats. We then store the computed rotation_info under intel_framebuffer so that we don't have to recompute it again. To handle fb->offsets[] we treat them as a linear offsets and convert them to x/y offsets from the start of the relevant GTT mapping (either normal or rotated). We store the x/y offsets under intel_framebuffer, and for some extra convenience we also store the rotated pitch (ie. tile aligned plane height). So for each plane we have the normal x/y offsets, rotated x/y offsets, and the rotated pitch. The normal pitch is available already in fb->pitches[]. While we're gathering up all that extra information, we can also easily compute the storage requirements for the framebuffer, so that we can check that the object is big enough to hold it. When it comes time to deal with the plane source coordinates, we first rotate the clipped src coordinates to match the relevant GTT view orientation, then add to them the fb x/y offsets. Next we compute the aligned surface page offset, and as a result we're left with some residual x/y offsets. Finally, if required by the hardware, we convert the remaining x/y offsets into a linear offset. For gen2/3 we simply skip computing the final page offset, and just convert the src+fb x/y offsets directly into a linear offset since that's what the hardware wants. After this all platforms, incluing SKL+, compute these things in exactly the same way (excluding alignemnt differences). v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating plane src coordinates Drop some spurious changes that got left behind during development v3: Split out more changes to prep patches (Daniel) s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity Rename intel_surf_gtt_offset to intel_fb_gtt_offset Kill the pointless 'plane' parameter from intel_fb_gtt_offset() v4: Fix alignment vs. alignment-1 when calling _intel_compute_tile_offset() from intel_fill_fb_info() Pass the pitch in tiles in stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info() Pass the full width/height of the rotated area to drm_rect_rotate() for clarity Use u32 for more offsets v5: Preserve the upper_32_bits()/lower_32_bits() handling for the fb ggtt offset (Sivakumar) v6: Rebase due to drm_plane_state src/dst rects Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-15 17:16:41 +07:00
for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++) {
sg = rotate_pages(obj, rot_info->plane[i].offset,
drm/i915: Rewrite fb rotation GTT handling Redo the fb rotation handling in order to: - eliminate the NV12 special casing - handle fb->offsets[] properly - make the rotation handling easier for the plane code To achieve these goals we reduce intel_rotation_info to only contain (for each plane) the rotated view width,height,stride in tile units, and the page offset into the object where the plane starts. Each plane is handled exactly the same way, no special casing for NV12 or other formats. We then store the computed rotation_info under intel_framebuffer so that we don't have to recompute it again. To handle fb->offsets[] we treat them as a linear offsets and convert them to x/y offsets from the start of the relevant GTT mapping (either normal or rotated). We store the x/y offsets under intel_framebuffer, and for some extra convenience we also store the rotated pitch (ie. tile aligned plane height). So for each plane we have the normal x/y offsets, rotated x/y offsets, and the rotated pitch. The normal pitch is available already in fb->pitches[]. While we're gathering up all that extra information, we can also easily compute the storage requirements for the framebuffer, so that we can check that the object is big enough to hold it. When it comes time to deal with the plane source coordinates, we first rotate the clipped src coordinates to match the relevant GTT view orientation, then add to them the fb x/y offsets. Next we compute the aligned surface page offset, and as a result we're left with some residual x/y offsets. Finally, if required by the hardware, we convert the remaining x/y offsets into a linear offset. For gen2/3 we simply skip computing the final page offset, and just convert the src+fb x/y offsets directly into a linear offset since that's what the hardware wants. After this all platforms, incluing SKL+, compute these things in exactly the same way (excluding alignemnt differences). v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating plane src coordinates Drop some spurious changes that got left behind during development v3: Split out more changes to prep patches (Daniel) s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity Rename intel_surf_gtt_offset to intel_fb_gtt_offset Kill the pointless 'plane' parameter from intel_fb_gtt_offset() v4: Fix alignment vs. alignment-1 when calling _intel_compute_tile_offset() from intel_fill_fb_info() Pass the pitch in tiles in stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info() Pass the full width/height of the rotated area to drm_rect_rotate() for clarity Use u32 for more offsets v5: Preserve the upper_32_bits()/lower_32_bits() handling for the fb ggtt offset (Sivakumar) v6: Rebase due to drm_plane_state src/dst rects Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-15 17:16:41 +07:00
rot_info->plane[i].width, rot_info->plane[i].height,
rot_info->plane[i].stride, st, sg);
}
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
return st;
err_sg_alloc:
kfree(st);
err_st_alloc:
DRM_DEBUG_DRIVER("Failed to create rotated mapping for object size %zu! (%ux%u tiles, %u pages)\n",
obj->base.size, rot_info->plane[0].width, rot_info->plane[0].height, size);
drm/i915: Rewrite fb rotation GTT handling Redo the fb rotation handling in order to: - eliminate the NV12 special casing - handle fb->offsets[] properly - make the rotation handling easier for the plane code To achieve these goals we reduce intel_rotation_info to only contain (for each plane) the rotated view width,height,stride in tile units, and the page offset into the object where the plane starts. Each plane is handled exactly the same way, no special casing for NV12 or other formats. We then store the computed rotation_info under intel_framebuffer so that we don't have to recompute it again. To handle fb->offsets[] we treat them as a linear offsets and convert them to x/y offsets from the start of the relevant GTT mapping (either normal or rotated). We store the x/y offsets under intel_framebuffer, and for some extra convenience we also store the rotated pitch (ie. tile aligned plane height). So for each plane we have the normal x/y offsets, rotated x/y offsets, and the rotated pitch. The normal pitch is available already in fb->pitches[]. While we're gathering up all that extra information, we can also easily compute the storage requirements for the framebuffer, so that we can check that the object is big enough to hold it. When it comes time to deal with the plane source coordinates, we first rotate the clipped src coordinates to match the relevant GTT view orientation, then add to them the fb x/y offsets. Next we compute the aligned surface page offset, and as a result we're left with some residual x/y offsets. Finally, if required by the hardware, we convert the remaining x/y offsets into a linear offset. For gen2/3 we simply skip computing the final page offset, and just convert the src+fb x/y offsets directly into a linear offset since that's what the hardware wants. After this all platforms, incluing SKL+, compute these things in exactly the same way (excluding alignemnt differences). v2: Use BIT(DRM_ROTATE_270) instead of ROTATE_270 when rotating plane src coordinates Drop some spurious changes that got left behind during development v3: Split out more changes to prep patches (Daniel) s/intel_fb->plane[].foo.bar/intel_fb->foo[].bar/ for brevity Rename intel_surf_gtt_offset to intel_fb_gtt_offset Kill the pointless 'plane' parameter from intel_fb_gtt_offset() v4: Fix alignment vs. alignment-1 when calling _intel_compute_tile_offset() from intel_fill_fb_info() Pass the pitch in tiles in stad of pixels to intel_adjust_tile_offset() from intel_fill_fb_info() Pass the full width/height of the rotated area to drm_rect_rotate() for clarity Use u32 for more offsets v5: Preserve the upper_32_bits()/lower_32_bits() handling for the fb ggtt offset (Sivakumar) v6: Rebase due to drm_plane_state src/dst rects Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1470821001-25272-2-git-send-email-ville.syrjala@linux.intel.com Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-09-15 17:16:41 +07:00
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
return ERR_PTR(ret);
}
static struct scatterlist *
remap_pages(struct drm_i915_gem_object *obj, unsigned int offset,
unsigned int width, unsigned int height,
unsigned int stride,
struct sg_table *st, struct scatterlist *sg)
{
unsigned int row;
for (row = 0; row < height; row++) {
unsigned int left = width * I915_GTT_PAGE_SIZE;
while (left) {
dma_addr_t addr;
unsigned int length;
/* We don't need the pages, but need to initialize
* the entries so the sg list can be happily traversed.
* The only thing we need are DMA addresses.
*/
addr = i915_gem_object_get_dma_address_len(obj, offset, &length);
length = min(left, length);
st->nents++;
sg_set_page(sg, NULL, length, 0);
sg_dma_address(sg) = addr;
sg_dma_len(sg) = length;
sg = sg_next(sg);
offset += length / I915_GTT_PAGE_SIZE;
left -= length;
}
offset += stride - width;
}
return sg;
}
static noinline struct sg_table *
intel_remap_pages(struct intel_remapped_info *rem_info,
struct drm_i915_gem_object *obj)
{
unsigned int size = intel_remapped_info_size(rem_info);
struct sg_table *st;
struct scatterlist *sg;
int ret = -ENOMEM;
int i;
/* Allocate target SG list. */
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (!st)
goto err_st_alloc;
ret = sg_alloc_table(st, size, GFP_KERNEL);
if (ret)
goto err_sg_alloc;
st->nents = 0;
sg = st->sgl;
for (i = 0 ; i < ARRAY_SIZE(rem_info->plane); i++) {
sg = remap_pages(obj, rem_info->plane[i].offset,
rem_info->plane[i].width, rem_info->plane[i].height,
rem_info->plane[i].stride, st, sg);
}
i915_sg_trim(st);
return st;
err_sg_alloc:
kfree(st);
err_st_alloc:
DRM_DEBUG_DRIVER("Failed to create remapped mapping for object size %zu! (%ux%u tiles, %u pages)\n",
obj->base.size, rem_info->plane[0].width, rem_info->plane[0].height, size);
return ERR_PTR(ret);
}
static noinline struct sg_table *
intel_partial_pages(const struct i915_ggtt_view *view,
struct drm_i915_gem_object *obj)
{
struct sg_table *st;
struct scatterlist *sg, *iter;
unsigned int count = view->partial.size;
unsigned int offset;
int ret = -ENOMEM;
st = kmalloc(sizeof(*st), GFP_KERNEL);
if (!st)
goto err_st_alloc;
ret = sg_alloc_table(st, count, GFP_KERNEL);
if (ret)
goto err_sg_alloc;
iter = i915_gem_object_get_sg(obj, view->partial.offset, &offset);
GEM_BUG_ON(!iter);
sg = st->sgl;
st->nents = 0;
do {
unsigned int len;
len = min(iter->length - (offset << PAGE_SHIFT),
count << PAGE_SHIFT);
sg_set_page(sg, NULL, len, 0);
sg_dma_address(sg) =
sg_dma_address(iter) + (offset << PAGE_SHIFT);
sg_dma_len(sg) = len;
st->nents++;
count -= len >> PAGE_SHIFT;
if (count == 0) {
sg_mark_end(sg);
i915_sg_trim(st); /* Drop any unused tail entries. */
return st;
}
sg = __sg_next(sg);
iter = __sg_next(iter);
offset = 0;
} while (1);
err_sg_alloc:
kfree(st);
err_st_alloc:
return ERR_PTR(ret);
}
static int
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
i915_get_ggtt_vma_pages(struct i915_vma *vma)
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 00:27:58 +07:00
{
int ret;
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
/* The vma->pages are only valid within the lifespan of the borrowed
* obj->mm.pages. When the obj->mm.pages sg_table is regenerated, so
* must be the vma->pages. A simple rule is that vma->pages must only
* be accessed when the obj->mm.pages are pinned.
*/
GEM_BUG_ON(!i915_gem_object_has_pinned_pages(vma->obj));
switch (vma->ggtt_view.type) {
default:
GEM_BUG_ON(vma->ggtt_view.type);
/* fall through */
case I915_GGTT_VIEW_NORMAL:
vma->pages = vma->obj->mm.pages;
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 00:27:58 +07:00
return 0;
case I915_GGTT_VIEW_ROTATED:
vma->pages =
intel_rotate_pages(&vma->ggtt_view.rotated, vma->obj);
break;
case I915_GGTT_VIEW_REMAPPED:
vma->pages =
intel_remap_pages(&vma->ggtt_view.remapped, vma->obj);
break;
case I915_GGTT_VIEW_PARTIAL:
vma->pages = intel_partial_pages(&vma->ggtt_view, vma->obj);
break;
}
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 00:27:58 +07:00
ret = 0;
if (IS_ERR(vma->pages)) {
ret = PTR_ERR(vma->pages);
vma->pages = NULL;
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
DRM_ERROR("Failed to get pages for VMA view type %u (%d)!\n",
vma->ggtt_view.type, ret);
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 00:27:58 +07:00
}
drm/i915/skl: Support secondary (rotated) frame buffer mapping 90/270 rotated scanout needs a rotated GTT view of the framebuffer. This is put in a separate VMA with a dedicated ggtt view and wired such that it is created when a framebuffer is pinned to a 90/270 rotated plane. Rotation is only possible with Yb/Yf buffers and error is propagated to user space in case of a mismatch. Special rotated page view is constructed at the VMA creation time by borrowing the DMA addresses from obj->pages. v2: * Do not bother with pages for rotated sg list, just populate the DMA addresses. (Daniel Vetter) * Checkpatch cleanup. v3: * Rebased on top of new plane handling (create rotated mapping when setting the rotation property). * Unpin rotated VMA on unpinning from display plane. * Simplify rotation check using bitwise AND. (Chris Wilson) v4: * Fix unpinning of optional rotated mapping so it is really considered to be optional. v5: * Rebased for fb modifier changes. * Rebased for atomic commit. * Only pin needed view for display. (Ville Syrjälä, Daniel Vetter) v6: * Rebased after preparatory work has been extracted out. (Daniel Vetter) v7: * Slightly simplified tiling geometry calculation. * Moved rotated GGTT view implementation into i915_gem_gtt.c (Daniel Vetter) v8: * Do not use i915_gem_obj_size to get object size since that actually returns the size of an VMA which may not exist. * Rebased for ggtt view changes. v9: * Rebased after code review changes on the preceding patches. * Tidy function definitions. (Joonas Lahtinen) For: VIZ-4726 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: Michel Thierry <michel.thierry@intel.com> (v4) Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2015-03-23 18:10:36 +07:00
return ret;
drm/i915: Infrastructure for supporting different GGTT views per object Things like reliable GGTT mappings and mirrored 2d-on-3d display will need to map objects into the same address space multiple times. Added a GGTT view concept and linked it with the VMA to distinguish between multiple instances per address space. New objects and GEM functions which do not take this new view as a parameter assume the default of zero (I915_GGTT_VIEW_NORMAL) which preserves the previous behaviour. This now means that objects can have multiple VMA entries so the code which assumed there will only be one also had to be modified. Alternative GGTT views are supposed to borrow DMA addresses from obj->pages which is DMA mapped on first VMA instantiation and unmapped on the last one going away. v2: * Removed per view special casing in i915_gem_ggtt_prepare / finish_object in favour of creating and destroying DMA mappings on first VMA instantiation and last VMA destruction. (Daniel Vetter) * Simplified i915_vma_unbind which does not need to count the GGTT views. (Daniel Vetter) * Also moved obj->map_and_fenceable reset under the same check. * Checkpatch cleanups. v3: * Only retire objects once the last VMA is unbound. v4: * Keep scatter-gather table for alternative views persistent for the lifetime of the VMA. * Propagate binding errors to callers and handle appropriately. v5: * Explicitly look for normal GGTT view in i915_gem_obj_bound to align usage in i915_gem_object_ggtt_unpin. (Michel Thierry) * Change to single if statement in i915_gem_obj_to_ggtt. (Michel Thierry) * Removed stray semi-colon in i915_gem_object_set_cache_level. For: VIZ-4544 Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Michel Thierry <michel.thierry@intel.com> [danvet: Drop hunk from i915_gem_shrink since it's just prettification but upsets a __must_check warning.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2014-12-11 00:27:58 +07:00
}
/**
* i915_gem_gtt_reserve - reserve a node in an address_space (GTT)
* @vm: the &struct i915_address_space
* @node: the &struct drm_mm_node (typically i915_vma.mode)
* @size: how much space to allocate inside the GTT,
* must be #I915_GTT_PAGE_SIZE aligned
* @offset: where to insert inside the GTT,
* must be #I915_GTT_MIN_ALIGNMENT aligned, and the node
* (@offset + @size) must fit within the address space
* @color: color to apply to node, if this node is not from a VMA,
* color must be #I915_COLOR_UNEVICTABLE
* @flags: control search and eviction behaviour
*
* i915_gem_gtt_reserve() tries to insert the @node at the exact @offset inside
* the address space (using @size and @color). If the @node does not fit, it
* tries to evict any overlapping nodes from the GTT, including any
* neighbouring nodes if the colors do not match (to ensure guard pages between
* differing domains). See i915_gem_evict_for_node() for the gory details
* on the eviction algorithm. #PIN_NONBLOCK may used to prevent waiting on
* evicting active overlapping objects, and any overlapping node that is pinned
* or marked as unevictable will also result in failure.
*
* Returns: 0 on success, -ENOSPC if no suitable hole is found, -EINTR if
* asked to wait for eviction and interrupted.
*/
int i915_gem_gtt_reserve(struct i915_address_space *vm,
struct drm_mm_node *node,
u64 size, u64 offset, unsigned long color,
unsigned int flags)
{
int err;
GEM_BUG_ON(!size);
GEM_BUG_ON(!IS_ALIGNED(size, I915_GTT_PAGE_SIZE));
GEM_BUG_ON(!IS_ALIGNED(offset, I915_GTT_MIN_ALIGNMENT));
GEM_BUG_ON(range_overflows(offset, size, vm->total));
GEM_BUG_ON(vm == &vm->i915->ggtt.alias->vm);
GEM_BUG_ON(drm_mm_node_allocated(node));
node->size = size;
node->start = offset;
node->color = color;
err = drm_mm_reserve_node(&vm->mm, node);
if (err != -ENOSPC)
return err;
if (flags & PIN_NOEVICT)
return -ENOSPC;
err = i915_gem_evict_for_node(vm, node, flags);
if (err == 0)
err = drm_mm_reserve_node(&vm->mm, node);
return err;
}
drm/i915: Prefer random replacement before eviction search Performing an eviction search can be very, very slow especially for a range restricted replacement. For example, a workload like gem_concurrent_blit will populate the entire GTT and then cause aperture thrashing. Since the GTT is a mix of active and inactive tiny objects, we have to search through almost 400k objects before finding anything inside the mappable region, and as this search is required before every operation performance falls off a cliff. Instead of performing the full search, we do a trial replacement of the node at a random location fitting the specified restrictions. We lose the strict LRU property of the GTT in exchange for avoiding the slow search (several orders of runtime improvement for gem_concurrent_blit 4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is (later) mitigated firstly by only doing replacement if we find no freespace and secondly by execbuf doing a PIN_NONBLOCK search first before it starts thrashing (i.e. the random replacement will only occur from the already inactive set of objects). v2: Ascii-art, and check preconditionst v3: Rephrase final sentence in comment to explain why we don't bother with if (i915_is_ggtt(vm)) for preferring random replacement. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
2017-01-11 18:23:12 +07:00
static u64 random_offset(u64 start, u64 end, u64 len, u64 align)
{
u64 range, addr;
GEM_BUG_ON(range_overflows(start, len, end));
GEM_BUG_ON(round_up(start, align) > round_down(end - len, align));
range = round_down(end - len, align) - round_up(start, align);
if (range) {
if (sizeof(unsigned long) == sizeof(u64)) {
addr = get_random_long();
} else {
addr = get_random_int();
if (range > U32_MAX) {
addr <<= 32;
addr |= get_random_int();
}
}
div64_u64_rem(addr, range, &addr);
start += addr;
}
return round_up(start, align);
}
/**
* i915_gem_gtt_insert - insert a node into an address_space (GTT)
* @vm: the &struct i915_address_space
* @node: the &struct drm_mm_node (typically i915_vma.node)
* @size: how much space to allocate inside the GTT,
* must be #I915_GTT_PAGE_SIZE aligned
* @alignment: required alignment of starting offset, may be 0 but
* if specified, this must be a power-of-two and at least
* #I915_GTT_MIN_ALIGNMENT
* @color: color to apply to node
* @start: start of any range restriction inside GTT (0 for all),
* must be #I915_GTT_PAGE_SIZE aligned
* @end: end of any range restriction inside GTT (U64_MAX for all),
* must be #I915_GTT_PAGE_SIZE aligned if not U64_MAX
* @flags: control search and eviction behaviour
*
* i915_gem_gtt_insert() first searches for an available hole into which
* is can insert the node. The hole address is aligned to @alignment and
* its @size must then fit entirely within the [@start, @end] bounds. The
* nodes on either side of the hole must match @color, or else a guard page
* will be inserted between the two nodes (or the node evicted). If no
drm/i915: Prefer random replacement before eviction search Performing an eviction search can be very, very slow especially for a range restricted replacement. For example, a workload like gem_concurrent_blit will populate the entire GTT and then cause aperture thrashing. Since the GTT is a mix of active and inactive tiny objects, we have to search through almost 400k objects before finding anything inside the mappable region, and as this search is required before every operation performance falls off a cliff. Instead of performing the full search, we do a trial replacement of the node at a random location fitting the specified restrictions. We lose the strict LRU property of the GTT in exchange for avoiding the slow search (several orders of runtime improvement for gem_concurrent_blit 4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is (later) mitigated firstly by only doing replacement if we find no freespace and secondly by execbuf doing a PIN_NONBLOCK search first before it starts thrashing (i.e. the random replacement will only occur from the already inactive set of objects). v2: Ascii-art, and check preconditionst v3: Rephrase final sentence in comment to explain why we don't bother with if (i915_is_ggtt(vm)) for preferring random replacement. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
2017-01-11 18:23:12 +07:00
* suitable hole is found, first a victim is randomly selected and tested
* for eviction, otherwise then the LRU list of objects within the GTT
* is scanned to find the first set of replacement nodes to create the hole.
* Those old overlapping nodes are evicted from the GTT (and so must be
* rebound before any future use). Any node that is currently pinned cannot
* be evicted (see i915_vma_pin()). Similar if the node's VMA is currently
* active and #PIN_NONBLOCK is specified, that node is also skipped when
* searching for an eviction candidate. See i915_gem_evict_something() for
* the gory details on the eviction algorithm.
*
* Returns: 0 on success, -ENOSPC if no suitable hole is found, -EINTR if
* asked to wait for eviction and interrupted.
*/
int i915_gem_gtt_insert(struct i915_address_space *vm,
struct drm_mm_node *node,
u64 size, u64 alignment, unsigned long color,
u64 start, u64 end, unsigned int flags)
{
drm: Improve drm_mm search (and fix topdown allocation) with rbtrees The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03 04:04:38 +07:00
enum drm_mm_insert_mode mode;
drm/i915: Prefer random replacement before eviction search Performing an eviction search can be very, very slow especially for a range restricted replacement. For example, a workload like gem_concurrent_blit will populate the entire GTT and then cause aperture thrashing. Since the GTT is a mix of active and inactive tiny objects, we have to search through almost 400k objects before finding anything inside the mappable region, and as this search is required before every operation performance falls off a cliff. Instead of performing the full search, we do a trial replacement of the node at a random location fitting the specified restrictions. We lose the strict LRU property of the GTT in exchange for avoiding the slow search (several orders of runtime improvement for gem_concurrent_blit 4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is (later) mitigated firstly by only doing replacement if we find no freespace and secondly by execbuf doing a PIN_NONBLOCK search first before it starts thrashing (i.e. the random replacement will only occur from the already inactive set of objects). v2: Ascii-art, and check preconditionst v3: Rephrase final sentence in comment to explain why we don't bother with if (i915_is_ggtt(vm)) for preferring random replacement. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
2017-01-11 18:23:12 +07:00
u64 offset;
int err;
lockdep_assert_held(&vm->i915->drm.struct_mutex);
GEM_BUG_ON(!size);
GEM_BUG_ON(!IS_ALIGNED(size, I915_GTT_PAGE_SIZE));
GEM_BUG_ON(alignment && !is_power_of_2(alignment));
GEM_BUG_ON(alignment && !IS_ALIGNED(alignment, I915_GTT_MIN_ALIGNMENT));
GEM_BUG_ON(start >= end);
GEM_BUG_ON(start > 0 && !IS_ALIGNED(start, I915_GTT_PAGE_SIZE));
GEM_BUG_ON(end < U64_MAX && !IS_ALIGNED(end, I915_GTT_PAGE_SIZE));
GEM_BUG_ON(vm == &vm->i915->ggtt.alias->vm);
GEM_BUG_ON(drm_mm_node_allocated(node));
if (unlikely(range_overflows(start, size, end)))
return -ENOSPC;
if (unlikely(round_up(start, alignment) > round_down(end - size, alignment)))
return -ENOSPC;
drm: Improve drm_mm search (and fix topdown allocation) with rbtrees The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03 04:04:38 +07:00
mode = DRM_MM_INSERT_BEST;
if (flags & PIN_HIGH)
mode = DRM_MM_INSERT_HIGHEST;
drm: Improve drm_mm search (and fix topdown allocation) with rbtrees The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03 04:04:38 +07:00
if (flags & PIN_MAPPABLE)
mode = DRM_MM_INSERT_LOW;
/* We only allocate in PAGE_SIZE/GTT_PAGE_SIZE (4096) chunks,
* so we know that we always have a minimum alignment of 4096.
* The drm_mm range manager is optimised to return results
* with zero alignment, so where possible use the optimal
* path.
*/
BUILD_BUG_ON(I915_GTT_MIN_ALIGNMENT > I915_GTT_PAGE_SIZE);
if (alignment <= I915_GTT_MIN_ALIGNMENT)
alignment = 0;
drm: Improve drm_mm search (and fix topdown allocation) with rbtrees The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03 04:04:38 +07:00
err = drm_mm_insert_node_in_range(&vm->mm, node,
size, alignment, color,
start, end, mode);
if (err != -ENOSPC)
return err;
if (mode & DRM_MM_INSERT_ONCE) {
err = drm_mm_insert_node_in_range(&vm->mm, node,
size, alignment, color,
start, end,
DRM_MM_INSERT_BEST);
if (err != -ENOSPC)
return err;
}
if (flags & PIN_NOEVICT)
return -ENOSPC;
/*
* No free space, pick a slot at random.
drm/i915: Prefer random replacement before eviction search Performing an eviction search can be very, very slow especially for a range restricted replacement. For example, a workload like gem_concurrent_blit will populate the entire GTT and then cause aperture thrashing. Since the GTT is a mix of active and inactive tiny objects, we have to search through almost 400k objects before finding anything inside the mappable region, and as this search is required before every operation performance falls off a cliff. Instead of performing the full search, we do a trial replacement of the node at a random location fitting the specified restrictions. We lose the strict LRU property of the GTT in exchange for avoiding the slow search (several orders of runtime improvement for gem_concurrent_blit 4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is (later) mitigated firstly by only doing replacement if we find no freespace and secondly by execbuf doing a PIN_NONBLOCK search first before it starts thrashing (i.e. the random replacement will only occur from the already inactive set of objects). v2: Ascii-art, and check preconditionst v3: Rephrase final sentence in comment to explain why we don't bother with if (i915_is_ggtt(vm)) for preferring random replacement. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
2017-01-11 18:23:12 +07:00
*
* There is a pathological case here using a GTT shared between
* mmap and GPU (i.e. ggtt/aliasing_ppgtt but not full-ppgtt):
*
* |<-- 256 MiB aperture -->||<-- 1792 MiB unmappable -->|
* (64k objects) (448k objects)
*
* Now imagine that the eviction LRU is ordered top-down (just because
* pathology meets real life), and that we need to evict an object to
* make room inside the aperture. The eviction scan then has to walk
* the 448k list before it finds one within range. And now imagine that
* it has to search for a new hole between every byte inside the memcpy,
* for several simultaneous clients.
*
* On a full-ppgtt system, if we have run out of available space, there
* will be lots and lots of objects in the eviction list! Again,
* searching that LRU list may be slow if we are also applying any
* range restrictions (e.g. restriction to low 4GiB) and so, for
* simplicity and similarilty between different GTT, try the single
* random replacement first.
*/
offset = random_offset(start, end,
size, alignment ?: I915_GTT_MIN_ALIGNMENT);
err = i915_gem_gtt_reserve(vm, node, size, offset, color, flags);
if (err != -ENOSPC)
return err;
if (flags & PIN_NOSEARCH)
return -ENOSPC;
drm/i915: Prefer random replacement before eviction search Performing an eviction search can be very, very slow especially for a range restricted replacement. For example, a workload like gem_concurrent_blit will populate the entire GTT and then cause aperture thrashing. Since the GTT is a mix of active and inactive tiny objects, we have to search through almost 400k objects before finding anything inside the mappable region, and as this search is required before every operation performance falls off a cliff. Instead of performing the full search, we do a trial replacement of the node at a random location fitting the specified restrictions. We lose the strict LRU property of the GTT in exchange for avoiding the slow search (several orders of runtime improvement for gem_concurrent_blit 4KiB-global-gtt, e.g. from 5000s to 20s). The loss of LRU replacement is (later) mitigated firstly by only doing replacement if we find no freespace and secondly by execbuf doing a PIN_NONBLOCK search first before it starts thrashing (i.e. the random replacement will only occur from the already inactive set of objects). v2: Ascii-art, and check preconditionst v3: Rephrase final sentence in comment to explain why we don't bother with if (i915_is_ggtt(vm)) for preferring random replacement. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111112312.31493-3-chris@chris-wilson.co.uk
2017-01-11 18:23:12 +07:00
/* Randomly selected placement is pinned, do a search */
err = i915_gem_evict_something(vm, size, alignment, color,
start, end, flags);
if (err)
return err;
drm: Improve drm_mm search (and fix topdown allocation) with rbtrees The drm_mm range manager claimed to support top-down insertion, but it was neither searching for the top-most hole that could fit the allocation request nor fitting the request to the hole correctly. In order to search the range efficiently, we create a secondary index for the holes using either their size or their address. This index allows us to find the smallest hole or the hole at the bottom or top of the range efficiently, whilst keeping the hole stack to rapidly service evictions. v2: Search for holes both high and low. Rename flags to mode. v3: Discover rb_entry_safe() and use it! v4: Kerneldoc for enum drm_mm_insert_mode. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: "Christian König" <christian.koenig@amd.com> Cc: David Airlie <airlied@linux.ie> Cc: Russell King <rmk+kernel@armlinux.org.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Eric Anholt <eric@anholt.net> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> # vmwgfx Reviewed-by: Lucas Stach <l.stach@pengutronix.de> #etnaviv Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202210438.28702-1-chris@chris-wilson.co.uk
2017-02-03 04:04:38 +07:00
return drm_mm_insert_node_in_range(&vm->mm, node,
size, alignment, color,
start, end, DRM_MM_INSERT_EVICT);
}
#if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
#include "selftests/mock_gtt.c"
#include "selftests/i915_gem_gtt.c"
#endif