AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-27 00:20:58 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
cab7562a92
linux_dsm_epyc7002/arch/arm/boot/dts/tegra114-tn7.dts

352 lines
7.4 KiB
Plaintext
Raw Normal View History

ARM: tegra: add Tegra Note 7 device tree Tegra Note 7 is a consumer tablet embedding a Tegra 4 SoC with 1GB RAM and a 720p panel. The following hardware is enabled by this device tree: UART, eMMC, USB (needs external power), PMIC, backlight, DSI panel, keys. SD card, HDMI, charger, self-powered USB, audio, wifi, bluetooth are not yet supported but might be by future patches (likely in that order). Touch panel, sensors & cameras will probably never be supported. Pinctrl is not set yet, as the bootloader-provided values allow us to use the currently supported hardware. Initrd addresses are hardcoded to match the static values used by the bootloader, since it won't add them for us. All the same, a kernel command-line is provided to replace the one passed by the bootloader which is filled with garbage. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> [treding@nvidia.com: DT fixes, DSI panel support] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-05-02 14:59:08 +07:00
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "tegra114.dtsi"
/ {
model = "Tegra Note 7";
compatible = "nvidia,tn7", "nvidia,tegra114";
chosen {
/* TN7's bootloader's arguments need to be overridden */
bootargs = "console=ttyS0,115200n8 console=tty1 gpt fbcon=rotate:2";
/* TN7's bootloader will place initrd at this address */
linux,initrd-start = <0x82000000>;
linux,initrd-end = <0x82800000>;
};
ARM: dts: tegra: move serial aliases to per-board There are general changes pending to make the /aliases/serial* entries number the serial ports on the system. On Tegra, so far the ports have been just numbered dynamically as they are configured so that makes them change. To avoid this, add specific aliases per board to keep the old numbers. This allows us to change the numbering by default on future SoCs while keeping the numbering on existing boards. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-12 03:49:30 +07:00
aliases {
serial0 = &uartd;
};
ARM: tegra: add Tegra Note 7 device tree Tegra Note 7 is a consumer tablet embedding a Tegra 4 SoC with 1GB RAM and a 720p panel. The following hardware is enabled by this device tree: UART, eMMC, USB (needs external power), PMIC, backlight, DSI panel, keys. SD card, HDMI, charger, self-powered USB, audio, wifi, bluetooth are not yet supported but might be by future patches (likely in that order). Touch panel, sensors & cameras will probably never be supported. Pinctrl is not set yet, as the bootloader-provided values allow us to use the currently supported hardware. Initrd addresses are hardcoded to match the static values used by the bootloader, since it won't add them for us. All the same, a kernel command-line is provided to replace the one passed by the bootloader which is filled with garbage. Signed-off-by: Alexandre Courbot <acourbot@nvidia.com> [treding@nvidia.com: DT fixes, DSI panel support] Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2014-05-02 14:59:08 +07:00
firmware {
trusted-foundations {
compatible = "tlm,trusted-foundations";
tlm,version-major = <2>;
tlm,version-minor = <8>;
};
};
memory {
/* memory >= 0x37e00000 is reserved for firmware usage */
reg = <0x80000000 0x37e00000>;
};
host1x@50000000 {
dsi@54300000 {
status = "okay";
vdd-supply = <&vdd_1v2_ap>;
panel@0 {
compatible = "lg,ld070wx3-sl01";
reg = <0>;
power-supply = <&vdd_lcd>;
backlight = <&backlight>;
};
};
};
serial@70006300 {
status = "okay";
};
pwm@7000a000 {
status = "okay";
};
i2c@7000d000 {
status = "okay";
clock-frequency = <400000>;
palmas: pmic@58 {
compatible = "ti,palmas";
reg = <0x58>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
#interrupt-cells = <2>;
interrupt-controller;
ti,system-power-controller;
palmas_gpio: gpio {
compatible = "ti,palmas-gpio";
gpio-controller;
#gpio-cells = <2>;
};
pmic {
compatible = "ti,tps65913-pmic", "ti,palmas-pmic";
ldoln-in-supply = <&vdd_smps10_out2>;
regulators {
smps123 {
regulator-name = "vd-cpu";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
};
smps45 {
regulator-name = "vd-soc";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
};
smps6 {
regulator-name = "va-lcd-hv";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
regulator-boot-on;
};
smps7 {
regulator-name = "vd-ddr";
regulator-min-microvolt = <1350000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v8: smps8 {
regulator-name = "vs-pmu-1v8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
vdd_2v9_sys: smps9 {
regulator-name = "vs-sys-2v9";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
regulator-always-on;
regulator-boot-on;
};
vdd_smps10_out1: smps10_out1 {
regulator-name = "vd-smps10-out1";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vdd_smps10_out2: smps10_out2 {
regulator-name = "vd-smps10-out2";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
ldo1 {
regulator-name = "va-pllx";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
};
vdd_1v2_ap: ldo2 {
regulator-name = "va-ap-1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
regulator-boot-on;
};
ldo3 {
regulator-name = "vd-fuse";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
};
ldo4 {
regulator-name = "vd-ts-hv";
regulator-min-microvolt = <3200000>;
regulator-max-microvolt = <3200000>;
regulator-always-on;
regulator-boot-on;
};
ldo5 {
regulator-name = "va-cam2-hv";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
ldo6 {
regulator-name = "va-sns-hv";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
};
ldo7 {
regulator-name = "va-cam1-hv";
regulator-min-microvolt = <2700000>;
regulator-max-microvolt = <2700000>;
};
ldo8 {
regulator-name = "va-ap-rtc";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
ti,enable-ldo8-tracking;
regulator-always-on;
regulator-boot-on;
};
ldo9 {
regulator-name = "vi-sdcard";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
};
ldousb {
regulator-name = "avdd-usb";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
ldoln {
regulator-name = "va-hdmi";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
};
};
rtc {
compatible = "ti,palmas-rtc";
interrupt-parent = <&palmas>;
interrupts = <8 0>;
};
};
};
pmc@7000e400 {
nvidia,invert-interrupt;
};
/* eMMC */
sdhci@78000600 {
status = "okay";
bus-width = <8>;
non-removable;
};
usb@7d000000 {
status = "okay";
};
usb-phy@7d000000 {
status = "okay";
nvidia,xcvr-setup = <7>;
nvidia,xcvr-lsfslew = <2>;
nvidia,xcvr-lsrslew = <2>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
/* Should be changed to "otg" once we have vbus_supply */
/* As of now, USB devices need to be powered externally */
dr_mode = "host";
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 1 40000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <6>;
power-supply = <&lcd_bl_en>;
};
clocks {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
clk32k_in: clock {
compatible = "fixed-clock";
reg = <0>;
#clock-cells = <0>;
clock-frequency = <32768>;
};
};
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
volume_down {
label = "Volume Down";
gpios = <&gpio TEGRA_GPIO(Q, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEDOWN>;
};
volume_up {
label = "Volume Up";
gpios = <&gpio TEGRA_GPIO(R, 2) GPIO_ACTIVE_LOW>;
linux,code = <KEY_VOLUMEUP>;
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
/* FIXME: output of BQ24192 */
vs_sys: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "VS_SYS";
regulator-min-microvolt = <4200000>;
regulator-max-microvolt = <4200000>;
regulator-always-on;
regulator-boot-on;
};
lcd_bl_en: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "VDD_LCD_BL";
regulator-min-microvolt = <16500000>;
regulator-max-microvolt = <16500000>;
gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vs_sys>;
regulator-boot-on;
};
vdd_lcd: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "VD_LCD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
gpio = <&palmas_gpio 4 GPIO_ACTIVE_HIGH>;
enable-active-high;
vin-supply = <&vdd_1v8>;
regulator-boot-on;
};
};
};
Reference in New Issue Copy Permalink