linux_dsm_epyc7002/drivers/gpu/drm/omapdrm/dss/display-sysfs.c

357 lines
8.1 KiB
C
Raw Normal View History

/*
* Copyright (C) 2009 Nokia Corporation
* Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
*
* Some code and ideas taken from drivers/video/omap/ driver
* by Imre Deak.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*/
#define DSS_SUBSYS_NAME "DISPLAY"
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/sysfs.h>
#include <video/omapdss.h>
#include "dss.h"
static ssize_t display_name_show(struct omap_dss_device *dssdev, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%s\n",
dssdev->name ?
dssdev->name : "");
}
static ssize_t display_enabled_show(struct omap_dss_device *dssdev, char *buf)
{
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 20:23:32 +07:00
return snprintf(buf, PAGE_SIZE, "%d\n",
omapdss_device_is_enabled(dssdev));
}
static ssize_t display_enabled_store(struct omap_dss_device *dssdev,
const char *buf, size_t size)
{
int r;
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 20:23:32 +07:00
bool enable;
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 20:23:32 +07:00
r = strtobool(buf, &enable);
if (r)
return r;
OMAPDSS: Implement display (dis)connect support We currently have two steps in panel initialization and startup: probing and enabling. After the panel has been probed, it's ready and can be configured and later enabled. This model is not enough with more complex display pipelines, where we may have, for example, two panels, of which only one can be used at a time, connected to the same video output. To support that kind of scenarios, we need to add new step to the initialization: connect. This patch adds support for connecting and disconnecting panels. After probe, but before connect, no panel ops should be called. When the connect is called, a proper video pipeline is established, and the panel is ready for use. If some part in the video pipeline is already connected (by some other panel), the connect call fails. One key difference with the old style setup is that connect() handles also connecting to the overlay manager. This means that the omapfb (or omapdrm) no longer needs to figure out which overlay manager to use, but it can just call connect() on the panel, and the proper overlay manager is connected by omapdss. This also allows us to add back the support for dynamic switching between two exclusive panels. However, the current panel device model is not changed to support this, as the new device model is implemented in the following patches and the old model will be removed. The new device model supports dynamic switching. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2013-05-08 20:23:32 +07:00
if (enable == omapdss_device_is_enabled(dssdev))
return size;
if (omapdss_device_is_connected(dssdev) == false)
return -ENODEV;
if (enable) {
r = dssdev->driver->enable(dssdev);
if (r)
return r;
} else {
dssdev->driver->disable(dssdev);
}
return size;
}
static ssize_t display_tear_show(struct omap_dss_device *dssdev, char *buf)
{
return snprintf(buf, PAGE_SIZE, "%d\n",
dssdev->driver->get_te ?
dssdev->driver->get_te(dssdev) : 0);
}
static ssize_t display_tear_store(struct omap_dss_device *dssdev,
const char *buf, size_t size)
{
int r;
bool te;
if (!dssdev->driver->enable_te || !dssdev->driver->get_te)
return -ENOENT;
r = strtobool(buf, &te);
if (r)
return r;
r = dssdev->driver->enable_te(dssdev, te);
if (r)
return r;
return size;
}
static ssize_t display_timings_show(struct omap_dss_device *dssdev, char *buf)
{
struct omap_video_timings t;
if (!dssdev->driver->get_timings)
return -ENOENT;
dssdev->driver->get_timings(dssdev, &t);
return snprintf(buf, PAGE_SIZE, "%u,%u/%u/%u/%u,%u/%u/%u/%u\n",
t.pixelclock,
t.x_res, t.hfp, t.hbp, t.hsw,
t.y_res, t.vfp, t.vbp, t.vsw);
}
static ssize_t display_timings_store(struct omap_dss_device *dssdev,
const char *buf, size_t size)
{
struct omap_video_timings t = dssdev->panel.timings;
int r, found;
if (!dssdev->driver->set_timings || !dssdev->driver->check_timings)
return -ENOENT;
found = 0;
#ifdef CONFIG_OMAP2_DSS_VENC
if (strncmp("pal", buf, 3) == 0) {
t = omap_dss_pal_timings;
found = 1;
} else if (strncmp("ntsc", buf, 4) == 0) {
t = omap_dss_ntsc_timings;
found = 1;
}
#endif
if (!found && sscanf(buf, "%u,%hu/%hu/%hu/%hu,%hu/%hu/%hu/%hu",
&t.pixelclock,
&t.x_res, &t.hfp, &t.hbp, &t.hsw,
&t.y_res, &t.vfp, &t.vbp, &t.vsw) != 9)
return -EINVAL;
r = dssdev->driver->check_timings(dssdev, &t);
if (r)
return r;
dssdev->driver->disable(dssdev);
dssdev->driver->set_timings(dssdev, &t);
r = dssdev->driver->enable(dssdev);
if (r)
return r;
return size;
}
static ssize_t display_rotate_show(struct omap_dss_device *dssdev, char *buf)
{
int rotate;
if (!dssdev->driver->get_rotate)
return -ENOENT;
rotate = dssdev->driver->get_rotate(dssdev);
return snprintf(buf, PAGE_SIZE, "%u\n", rotate);
}
static ssize_t display_rotate_store(struct omap_dss_device *dssdev,
const char *buf, size_t size)
{
int rot, r;
if (!dssdev->driver->set_rotate || !dssdev->driver->get_rotate)
return -ENOENT;
r = kstrtoint(buf, 0, &rot);
if (r)
return r;
r = dssdev->driver->set_rotate(dssdev, rot);
if (r)
return r;
return size;
}
static ssize_t display_mirror_show(struct omap_dss_device *dssdev, char *buf)
{
int mirror;
if (!dssdev->driver->get_mirror)
return -ENOENT;
mirror = dssdev->driver->get_mirror(dssdev);
return snprintf(buf, PAGE_SIZE, "%u\n", mirror);
}
static ssize_t display_mirror_store(struct omap_dss_device *dssdev,
const char *buf, size_t size)
{
int r;
bool mirror;
if (!dssdev->driver->set_mirror || !dssdev->driver->get_mirror)
return -ENOENT;
r = strtobool(buf, &mirror);
if (r)
return r;
r = dssdev->driver->set_mirror(dssdev, mirror);
if (r)
return r;
return size;
}
static ssize_t display_wss_show(struct omap_dss_device *dssdev, char *buf)
{
unsigned int wss;
if (!dssdev->driver->get_wss)
return -ENOENT;
wss = dssdev->driver->get_wss(dssdev);
return snprintf(buf, PAGE_SIZE, "0x%05x\n", wss);
}
static ssize_t display_wss_store(struct omap_dss_device *dssdev,
const char *buf, size_t size)
{
u32 wss;
int r;
if (!dssdev->driver->get_wss || !dssdev->driver->set_wss)
return -ENOENT;
r = kstrtou32(buf, 0, &wss);
if (r)
return r;
if (wss > 0xfffff)
return -EINVAL;
r = dssdev->driver->set_wss(dssdev, wss);
if (r)
return r;
return size;
}
struct display_attribute {
struct attribute attr;
ssize_t (*show)(struct omap_dss_device *, char *);
ssize_t (*store)(struct omap_dss_device *, const char *, size_t);
};
#define DISPLAY_ATTR(_name, _mode, _show, _store) \
struct display_attribute display_attr_##_name = \
__ATTR(_name, _mode, _show, _store)
static DISPLAY_ATTR(name, S_IRUGO, display_name_show, NULL);
static DISPLAY_ATTR(display_name, S_IRUGO, display_name_show, NULL);
static DISPLAY_ATTR(enabled, S_IRUGO|S_IWUSR,
display_enabled_show, display_enabled_store);
static DISPLAY_ATTR(tear_elim, S_IRUGO|S_IWUSR,
display_tear_show, display_tear_store);
static DISPLAY_ATTR(timings, S_IRUGO|S_IWUSR,
display_timings_show, display_timings_store);
static DISPLAY_ATTR(rotate, S_IRUGO|S_IWUSR,
display_rotate_show, display_rotate_store);
static DISPLAY_ATTR(mirror, S_IRUGO|S_IWUSR,
display_mirror_show, display_mirror_store);
static DISPLAY_ATTR(wss, S_IRUGO|S_IWUSR,
display_wss_show, display_wss_store);
static struct attribute *display_sysfs_attrs[] = {
&display_attr_name.attr,
&display_attr_display_name.attr,
&display_attr_enabled.attr,
&display_attr_tear_elim.attr,
&display_attr_timings.attr,
&display_attr_rotate.attr,
&display_attr_mirror.attr,
&display_attr_wss.attr,
NULL
};
static ssize_t display_attr_show(struct kobject *kobj, struct attribute *attr,
char *buf)
{
struct omap_dss_device *dssdev;
struct display_attribute *display_attr;
dssdev = container_of(kobj, struct omap_dss_device, kobj);
display_attr = container_of(attr, struct display_attribute, attr);
if (!display_attr->show)
return -ENOENT;
return display_attr->show(dssdev, buf);
}
static ssize_t display_attr_store(struct kobject *kobj, struct attribute *attr,
const char *buf, size_t size)
{
struct omap_dss_device *dssdev;
struct display_attribute *display_attr;
dssdev = container_of(kobj, struct omap_dss_device, kobj);
display_attr = container_of(attr, struct display_attribute, attr);
if (!display_attr->store)
return -ENOENT;
return display_attr->store(dssdev, buf, size);
}
static const struct sysfs_ops display_sysfs_ops = {
.show = display_attr_show,
.store = display_attr_store,
};
static struct kobj_type display_ktype = {
.sysfs_ops = &display_sysfs_ops,
.default_attrs = display_sysfs_attrs,
};
int display_init_sysfs(struct platform_device *pdev)
{
struct omap_dss_device *dssdev = NULL;
int r;
for_each_dss_dev(dssdev) {
r = kobject_init_and_add(&dssdev->kobj, &display_ktype,
&pdev->dev.kobj, "%s", dssdev->alias);
if (r) {
DSSERR("failed to create sysfs files\n");
omap_dss_put_device(dssdev);
goto err;
}
}
return 0;
err:
display_uninit_sysfs(pdev);
return r;
}
void display_uninit_sysfs(struct platform_device *pdev)
{
struct omap_dss_device *dssdev = NULL;
for_each_dss_dev(dssdev) {
if (kobject_name(&dssdev->kobj) == NULL)
continue;
kobject_del(&dssdev->kobj);
kobject_put(&dssdev->kobj);
memset(&dssdev->kobj, 0, sizeof(dssdev->kobj));
}
}