linux_dsm_epyc7002/net/bridge/br_netlink_tunnel.c

295 lines
6.8 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
/*
* Bridge per vlan tunnel port dst_metadata netlink control interface
*
* Authors:
* Roopa Prabhu <roopa@cumulusnetworks.com>
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/etherdevice.h>
#include <net/rtnetlink.h>
#include <net/net_namespace.h>
#include <net/sock.h>
#include <uapi/linux/if_bridge.h>
#include <net/dst_metadata.h>
#include "br_private.h"
#include "br_private_tunnel.h"
static size_t __get_vlan_tinfo_size(void)
{
return nla_total_size(0) + /* nest IFLA_BRIDGE_VLAN_TUNNEL_INFO */
nla_total_size(sizeof(u32)) + /* IFLA_BRIDGE_VLAN_TUNNEL_ID */
nla_total_size(sizeof(u16)) + /* IFLA_BRIDGE_VLAN_TUNNEL_VID */
nla_total_size(sizeof(u16)); /* IFLA_BRIDGE_VLAN_TUNNEL_FLAGS */
}
bool vlan_tunid_inrange(const struct net_bridge_vlan *v_curr,
const struct net_bridge_vlan *v_last)
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
{
__be32 tunid_curr = tunnel_id_to_key32(v_curr->tinfo.tunnel_id);
__be32 tunid_last = tunnel_id_to_key32(v_last->tinfo.tunnel_id);
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
return (be32_to_cpu(tunid_curr) - be32_to_cpu(tunid_last)) == 1;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
}
static int __get_num_vlan_tunnel_infos(struct net_bridge_vlan_group *vg)
{
struct net_bridge_vlan *v, *vtbegin = NULL, *vtend = NULL;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
int num_tinfos = 0;
/* Count number of vlan infos */
list_for_each_entry_rcu(v, &vg->vlan_list, vlist) {
/* only a context, bridge vlan not activated */
if (!br_vlan_should_use(v) || !v->tinfo.tunnel_id)
continue;
if (!vtbegin) {
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
goto initvars;
} else if ((v->vid - vtend->vid) == 1 &&
vlan_tunid_inrange(v, vtend)) {
vtend = v;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
continue;
} else {
if ((vtend->vid - vtbegin->vid) > 0)
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
num_tinfos += 2;
else
num_tinfos += 1;
}
initvars:
vtbegin = v;
vtend = v;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
}
if (vtbegin && vtend) {
if ((vtend->vid - vtbegin->vid) > 0)
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
num_tinfos += 2;
else
num_tinfos += 1;
}
return num_tinfos;
}
int br_get_vlan_tunnel_info_size(struct net_bridge_vlan_group *vg)
{
int num_tinfos;
if (!vg)
return 0;
rcu_read_lock();
num_tinfos = __get_num_vlan_tunnel_infos(vg);
rcu_read_unlock();
return num_tinfos * __get_vlan_tinfo_size();
}
static int br_fill_vlan_tinfo(struct sk_buff *skb, u16 vid,
__be64 tunnel_id, u16 flags)
{
__be32 tid = tunnel_id_to_key32(tunnel_id);
struct nlattr *tmap;
tmap = nla_nest_start_noflag(skb, IFLA_BRIDGE_VLAN_TUNNEL_INFO);
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
if (!tmap)
return -EMSGSIZE;
if (nla_put_u32(skb, IFLA_BRIDGE_VLAN_TUNNEL_ID,
be32_to_cpu(tid)))
goto nla_put_failure;
if (nla_put_u16(skb, IFLA_BRIDGE_VLAN_TUNNEL_VID,
vid))
goto nla_put_failure;
if (nla_put_u16(skb, IFLA_BRIDGE_VLAN_TUNNEL_FLAGS,
flags))
goto nla_put_failure;
nla_nest_end(skb, tmap);
return 0;
nla_put_failure:
nla_nest_cancel(skb, tmap);
return -EMSGSIZE;
}
static int br_fill_vlan_tinfo_range(struct sk_buff *skb,
struct net_bridge_vlan *vtbegin,
struct net_bridge_vlan *vtend)
{
int err;
if (vtend && (vtend->vid - vtbegin->vid) > 0) {
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
/* add range to skb */
err = br_fill_vlan_tinfo(skb, vtbegin->vid,
vtbegin->tinfo.tunnel_id,
BRIDGE_VLAN_INFO_RANGE_BEGIN);
if (err)
return err;
err = br_fill_vlan_tinfo(skb, vtend->vid,
vtend->tinfo.tunnel_id,
BRIDGE_VLAN_INFO_RANGE_END);
if (err)
return err;
} else {
err = br_fill_vlan_tinfo(skb, vtbegin->vid,
vtbegin->tinfo.tunnel_id,
0);
if (err)
return err;
}
return 0;
}
int br_fill_vlan_tunnel_info(struct sk_buff *skb,
struct net_bridge_vlan_group *vg)
{
struct net_bridge_vlan *vtbegin = NULL;
struct net_bridge_vlan *vtend = NULL;
struct net_bridge_vlan *v;
int err;
/* Count number of vlan infos */
list_for_each_entry_rcu(v, &vg->vlan_list, vlist) {
/* only a context, bridge vlan not activated */
if (!br_vlan_should_use(v))
continue;
if (!v->tinfo.tunnel_dst)
continue;
if (!vtbegin) {
goto initvars;
} else if ((v->vid - vtend->vid) == 1 &&
vlan_tunid_inrange(v, vtend)) {
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
vtend = v;
continue;
} else {
err = br_fill_vlan_tinfo_range(skb, vtbegin, vtend);
if (err)
return err;
}
initvars:
vtbegin = v;
vtend = v;
}
if (vtbegin) {
err = br_fill_vlan_tinfo_range(skb, vtbegin, vtend);
if (err)
return err;
}
return 0;
}
static const struct nla_policy vlan_tunnel_policy[IFLA_BRIDGE_VLAN_TUNNEL_MAX + 1] = {
[IFLA_BRIDGE_VLAN_TUNNEL_ID] = { .type = NLA_U32 },
[IFLA_BRIDGE_VLAN_TUNNEL_VID] = { .type = NLA_U16 },
[IFLA_BRIDGE_VLAN_TUNNEL_FLAGS] = { .type = NLA_U16 },
};
int br_vlan_tunnel_info(const struct net_bridge_port *p, int cmd,
u16 vid, u32 tun_id, bool *changed)
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
{
int err = 0;
if (!p)
return -EINVAL;
switch (cmd) {
case RTM_SETLINK:
err = nbp_vlan_tunnel_info_add(p, vid, tun_id);
if (!err)
*changed = true;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
break;
case RTM_DELLINK:
if (!nbp_vlan_tunnel_info_delete(p, vid))
*changed = true;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
break;
}
return err;
}
int br_parse_vlan_tunnel_info(struct nlattr *attr,
struct vtunnel_info *tinfo)
{
struct nlattr *tb[IFLA_BRIDGE_VLAN_TUNNEL_MAX + 1];
u32 tun_id;
u16 vid, flags = 0;
int err;
memset(tinfo, 0, sizeof(*tinfo));
netlink: make validation more configurable for future strictness We currently have two levels of strict validation: 1) liberal (default) - undefined (type >= max) & NLA_UNSPEC attributes accepted - attribute length >= expected accepted - garbage at end of message accepted 2) strict (opt-in) - NLA_UNSPEC attributes accepted - attribute length >= expected accepted Split out parsing strictness into four different options: * TRAILING - check that there's no trailing data after parsing attributes (in message or nested) * MAXTYPE - reject attrs > max known type * UNSPEC - reject attributes with NLA_UNSPEC policy entries * STRICT_ATTRS - strictly validate attribute size The default for future things should be *everything*. The current *_strict() is a combination of TRAILING and MAXTYPE, and is renamed to _deprecated_strict(). The current regular parsing has none of this, and is renamed to *_parse_deprecated(). Additionally it allows us to selectively set one of the new flags even on old policies. Notably, the UNSPEC flag could be useful in this case, since it can be arranged (by filling in the policy) to not be an incompatible userspace ABI change, but would then going forward prevent forgetting attribute entries. Similar can apply to the POLICY flag. We end up with the following renames: * nla_parse -> nla_parse_deprecated * nla_parse_strict -> nla_parse_deprecated_strict * nlmsg_parse -> nlmsg_parse_deprecated * nlmsg_parse_strict -> nlmsg_parse_deprecated_strict * nla_parse_nested -> nla_parse_nested_deprecated * nla_validate_nested -> nla_validate_nested_deprecated Using spatch, of course: @@ expression TB, MAX, HEAD, LEN, POL, EXT; @@ -nla_parse(TB, MAX, HEAD, LEN, POL, EXT) +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression NLH, HDRLEN, TB, MAX, POL, EXT; @@ -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT) +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT) @@ expression TB, MAX, NLA, POL, EXT; @@ -nla_parse_nested(TB, MAX, NLA, POL, EXT) +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT) @@ expression START, MAX, POL, EXT; @@ -nla_validate_nested(START, MAX, POL, EXT) +nla_validate_nested_deprecated(START, MAX, POL, EXT) @@ expression NLH, HDRLEN, MAX, POL, EXT; @@ -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT) +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT) For this patch, don't actually add the strict, non-renamed versions yet so that it breaks compile if I get it wrong. Also, while at it, make nla_validate and nla_parse go down to a common __nla_validate_parse() function to avoid code duplication. Ultimately, this allows us to have very strict validation for every new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the next patch, while existing things will continue to work as is. In effect then, this adds fully strict validation for any new command. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-26 19:07:28 +07:00
err = nla_parse_nested_deprecated(tb, IFLA_BRIDGE_VLAN_TUNNEL_MAX,
attr, vlan_tunnel_policy, NULL);
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
if (err < 0)
return err;
if (!tb[IFLA_BRIDGE_VLAN_TUNNEL_ID] ||
!tb[IFLA_BRIDGE_VLAN_TUNNEL_VID])
return -EINVAL;
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
tun_id = nla_get_u32(tb[IFLA_BRIDGE_VLAN_TUNNEL_ID]);
vid = nla_get_u16(tb[IFLA_BRIDGE_VLAN_TUNNEL_VID]);
if (vid >= VLAN_VID_MASK)
return -ERANGE;
if (tb[IFLA_BRIDGE_VLAN_TUNNEL_FLAGS])
flags = nla_get_u16(tb[IFLA_BRIDGE_VLAN_TUNNEL_FLAGS]);
tinfo->tunid = tun_id;
tinfo->vid = vid;
tinfo->flags = flags;
return 0;
}
int br_process_vlan_tunnel_info(const struct net_bridge *br,
const struct net_bridge_port *p, int cmd,
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
struct vtunnel_info *tinfo_curr,
struct vtunnel_info *tinfo_last,
bool *changed)
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
{
int err;
if (tinfo_curr->flags & BRIDGE_VLAN_INFO_RANGE_BEGIN) {
if (tinfo_last->flags & BRIDGE_VLAN_INFO_RANGE_BEGIN)
return -EINVAL;
memcpy(tinfo_last, tinfo_curr, sizeof(struct vtunnel_info));
} else if (tinfo_curr->flags & BRIDGE_VLAN_INFO_RANGE_END) {
int t, v;
if (!(tinfo_last->flags & BRIDGE_VLAN_INFO_RANGE_BEGIN))
return -EINVAL;
if ((tinfo_curr->vid - tinfo_last->vid) !=
(tinfo_curr->tunid - tinfo_last->tunid))
return -EINVAL;
t = tinfo_last->tunid;
for (v = tinfo_last->vid; v <= tinfo_curr->vid; v++) {
err = br_vlan_tunnel_info(p, cmd, v, t, changed);
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
if (err)
return err;
t++;
}
memset(tinfo_last, 0, sizeof(struct vtunnel_info));
memset(tinfo_curr, 0, sizeof(struct vtunnel_info));
} else {
if (tinfo_last->flags)
return -EINVAL;
err = br_vlan_tunnel_info(p, cmd, tinfo_curr->vid,
tinfo_curr->tunid, changed);
bridge: per vlan dst_metadata netlink support This patch adds support to attach per vlan tunnel info dst metadata. This enables bridge driver to map vlan to tunnel_info at ingress and egress. It uses the kernel dst_metadata infrastructure. The initial use case is vlan to vni bridging, but the api is generic to extend to any tunnel_info in the future: - Uapi to configure/unconfigure/dump per vlan tunnel data - netlink functions to configure vlan and tunnel_info mapping - Introduces bridge port flag BR_LWT_VLAN to enable attach/detach dst_metadata to bridged packets on ports. off by default. - changes to existing code is mainly refactor some existing vlan handling netlink code + hooks for new vlan tunnel code - I have kept the vlan tunnel code isolated in separate files. - most of the netlink vlan tunnel code is handling of vlan-tunid ranges (follows the vlan range handling code). To conserve space vlan-tunid by default are always dumped in ranges if applicable. Use case: example use for this is a vxlan bridging gateway or vtep which maps vlans to vn-segments (or vnis). iproute2 example (patched and pruned iproute2 output to just show relevant fdb entries): example shows same host mac learnt on two vni's and vlan 100 maps to vni 1000, vlan 101 maps to vni 1001 before (netdev per vni): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan1001 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan1000 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan1000 dst 12.0.0.8 self after this patch with collect metdata in bridged mode (single netdev): $bridge fdb show | grep "00:02:00:00:00:03" 00:02:00:00:00:03 dev vxlan0 vlan 101 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1001 dst 12.0.0.8 self 00:02:00:00:00:03 dev vxlan0 vlan 100 master bridge 00:02:00:00:00:03 dev vxlan0 src_vni 1000 dst 12.0.0.8 self CC: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-01 13:59:54 +07:00
if (err)
return err;
memset(tinfo_last, 0, sizeof(struct vtunnel_info));
memset(tinfo_curr, 0, sizeof(struct vtunnel_info));
}
return 0;
}