drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 10:17:46 +07:00
|
|
|
/*
|
|
|
|
*
|
|
|
|
* (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
|
|
|
|
*
|
|
|
|
*
|
|
|
|
* Parts of this file were based on sources as follows:
|
|
|
|
*
|
|
|
|
* Copyright (c) 2006-2008 Intel Corporation
|
|
|
|
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
|
|
|
|
* Copyright (C) 2011 Texas Instruments
|
|
|
|
*
|
|
|
|
* This program is free software and is provided to you under the terms of the
|
|
|
|
* GNU General Public License version 2 as published by the Free Software
|
|
|
|
* Foundation, and any use by you of this program is subject to the terms of
|
|
|
|
* such GNU licence.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _PL111_DRM_H_
|
|
|
|
#define _PL111_DRM_H_
|
|
|
|
|
|
|
|
#include <drm/drm_gem.h>
|
|
|
|
#include <drm/drm_simple_kms_helper.h>
|
2017-09-08 19:47:05 +07:00
|
|
|
#include <drm/drm_connector.h>
|
|
|
|
#include <drm/drm_encoder.h>
|
|
|
|
#include <drm/drm_panel.h>
|
|
|
|
#include <drm/drm_bridge.h>
|
2017-05-09 02:33:48 +07:00
|
|
|
#include <linux/clk-provider.h>
|
2017-09-08 19:47:08 +07:00
|
|
|
#include <linux/interrupt.h>
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 10:17:46 +07:00
|
|
|
|
|
|
|
#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)
|
|
|
|
|
2017-05-18 07:56:40 +07:00
|
|
|
struct drm_minor;
|
|
|
|
|
2017-09-08 19:47:06 +07:00
|
|
|
/**
|
|
|
|
* struct pl111_variant_data - encodes IP differences
|
|
|
|
* @name: the name of this variant
|
|
|
|
* @is_pl110: this is the early PL110 variant
|
2018-02-06 16:35:36 +07:00
|
|
|
* @external_bgr: this is the Versatile Pl110 variant with external
|
|
|
|
* BGR/RGB routing
|
2018-02-06 16:35:38 +07:00
|
|
|
* @broken_clockdivider: the clock divider is broken and we need to
|
|
|
|
* use the supplied clock directly
|
2018-02-06 16:35:39 +07:00
|
|
|
* @broken_vblank: the vblank IRQ is broken on this variant
|
2017-09-08 19:47:06 +07:00
|
|
|
* @formats: array of supported pixel formats on this variant
|
|
|
|
* @nformats: the length of the array of supported pixel formats
|
2018-03-02 16:09:45 +07:00
|
|
|
* @fb_bpp: desired bits per pixel on the default framebuffer
|
2017-09-08 19:47:06 +07:00
|
|
|
*/
|
|
|
|
struct pl111_variant_data {
|
|
|
|
const char *name;
|
|
|
|
bool is_pl110;
|
2018-02-06 16:35:36 +07:00
|
|
|
bool external_bgr;
|
2018-02-06 16:35:38 +07:00
|
|
|
bool broken_clockdivider;
|
2018-02-06 16:35:39 +07:00
|
|
|
bool broken_vblank;
|
2017-09-08 19:47:06 +07:00
|
|
|
const u32 *formats;
|
|
|
|
unsigned int nformats;
|
2018-03-02 16:09:45 +07:00
|
|
|
unsigned int fb_bpp;
|
2017-09-08 19:47:06 +07:00
|
|
|
};
|
|
|
|
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 10:17:46 +07:00
|
|
|
struct pl111_drm_dev_private {
|
|
|
|
struct drm_device *drm;
|
|
|
|
|
2017-09-08 19:47:05 +07:00
|
|
|
struct drm_connector *connector;
|
|
|
|
struct drm_panel *panel;
|
|
|
|
struct drm_bridge *bridge;
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 10:17:46 +07:00
|
|
|
struct drm_simple_display_pipe pipe;
|
|
|
|
|
|
|
|
void *regs;
|
2018-03-08 04:58:19 +07:00
|
|
|
u32 memory_bw;
|
2017-09-08 19:47:06 +07:00
|
|
|
u32 ienb;
|
|
|
|
u32 ctrl;
|
2017-05-09 02:33:48 +07:00
|
|
|
/* The pixel clock (a reference to our clock divider off of CLCDCLK). */
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 10:17:46 +07:00
|
|
|
struct clk *clk;
|
2017-05-09 02:33:48 +07:00
|
|
|
/* pl111's internal clock divider. */
|
|
|
|
struct clk_hw clk_div;
|
|
|
|
/* Lock to sync access to CLCD_TIM2 between the common clock
|
|
|
|
* subsystem and pl111_display_enable().
|
|
|
|
*/
|
|
|
|
spinlock_t tim2_lock;
|
2017-09-08 19:47:06 +07:00
|
|
|
const struct pl111_variant_data *variant;
|
2017-09-08 19:47:08 +07:00
|
|
|
void (*variant_display_enable) (struct drm_device *drm, u32 format);
|
|
|
|
void (*variant_display_disable) (struct drm_device *drm);
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 10:17:46 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
int pl111_display_init(struct drm_device *dev);
|
|
|
|
irqreturn_t pl111_irq(int irq, void *data);
|
2017-05-18 07:56:40 +07:00
|
|
|
int pl111_debugfs_init(struct drm_minor *minor);
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 10:17:46 +07:00
|
|
|
|
|
|
|
#endif /* _PL111_DRM_H_ */
|