linux_dsm_epyc7002/arch/mips/kvm/Makefile

# Makefile for KVM support for MIPS
#

common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)

EXTRA_CFLAGS += -Ivirt/kvm -Iarch/mips/kvm

common-objs-$(CONFIG_CPU_HAS_MSA) += msa.o

kvm-objs := $(common-objs-y) mips.o emulate.o entry.o \
	    interrupt.o stats.o commpage.o \
	    dyntrans.o trap_emul.o fpu.o
kvm-objs += hypcall.o
kvm-objs += mmu.o

obj-$(CONFIG_KVM)	+= kvm.o
obj-y			+= callback.o tlb.o
KVM/MIPS32: Release notes and KVM module Makefile Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2012-11-22 09:34:06 +07:00			`# Makefile for KVM support for MIPS`
			`#`

MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org 2015-03-05 18:43:36 +07:00			`common-objs-y = $(addprefix ../../../virt/kvm/, kvm_main.o coalesced_mmio.o)`
KVM/MIPS32: Release notes and KVM module Makefile Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2012-11-22 09:34:06 +07:00
			`EXTRA_CFLAGS += -Ivirt/kvm -Iarch/mips/kvm`

MIPS: KVM: Add base guest MSA support Add base code for supporting the MIPS SIMD Architecture (MSA) in MIPS KVM guests. MSA cannot yet be enabled in the guest, we're just laying the groundwork. As with the FPU, whether the guest's MSA context is loaded is stored in another bit in the fpu_inuse vcpu member. This allows MSA to be disabled when the guest disables it, but keeping the MSA context loaded so it doesn't have to be reloaded if the guest re-enables it. New assembly code is added for saving and restoring the MSA context, restoring only the upper half of the MSA context (for if the FPU context is already loaded) and for saving/clearing and restoring MSACSR (which can itself cause an MSA FP exception depending on the value). The MSACSR is restored before returning to the guest if MSA is already enabled, and the existing FP exception die notifier is extended to catch the possible MSA FP exception and step over the ctcmsa instruction. The helper function kvm_own_msa() is added to enable MSA and restore the MSA context if it isn't already loaded, which will be used in a later patch when the guest attempts to use MSA for the first time and triggers an MSA disabled exception. The existing FPU helpers are extended to handle MSA. kvm_lose_fpu() saves the full MSA context if it is loaded (which includes the FPU context) and both kvm_lose_fpu() and kvm_drop_fpu() disable MSA. kvm_own_fpu() also needs to lose any MSA context if FR=0, since there would be a risk of getting reserved instruction exceptions if CU1 is enabled and we later try and save the MSA context. We shouldn't usually hit this case since it will be handled when emulating CU1 changes, however there's nothing to stop the guest modifying the Status register directly via the comm page, which will cause this case to get hit. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org 2015-03-05 18:43:36 +07:00			`common-objs-$(CONFIG_CPU_HAS_MSA) += msa.o`

MIPS; KVM: Convert exception entry to uasm Convert the whole of locore.S (assembly to enter guest and handle exception entry) to be generated dynamically with uasm. This is done with minimal changes to the resulting code. The main changes are: - Some constants are generated by uasm using LUI+ADDIU instead of LUI+ORI. - Loading of lo and hi are swapped around in vcpu_run but not when resuming the guest after an exit. Both bits of logic are now generated by the same code. - Register MOVEs in uasm use different ADDU operand ordering to GNU as, putting zero register into rs instead of rt. - The JALR.HB to call the C exit handler is switched to JALR, since the hazard barrier would appear to be unnecessary. This will allow further optimisation in the future to dynamically handle the capabilities of the CPU. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim KrÄmÃ¡Å™ <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2016-06-23 23:34:39 +07:00			`kvm-objs := $(common-objs-y) mips.o emulate.o entry.o \`
MIPS: KVM: Rename files to remove the prefix "kvm_" and "kvm_mips_" Since all the files are in arch/mips/kvm/, there's no need of the prefixes "kvm_" and "kvm_mips_". Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2014-06-27 02:11:38 +07:00			`interrupt.o stats.o commpage.o \`
MIPS: KVM: Add base guest FPU support Add base code for supporting FPU in MIPS KVM guests. The FPU cannot yet be enabled in the guest, we're just laying the groundwork. Whether the guest's FPU context is loaded is stored in a bit in the fpu_inuse vcpu member. This allows the FPU to be disabled when the guest disables it, but keeping the FPU context loaded so it doesn't have to be reloaded if the guest re-enables it. An fpu_enabled vcpu member stores whether userland has enabled the FPU capability (which will be wired up in a later patch). New assembly code is added for saving and restoring the FPU context, and for saving/clearing and restoring FCSR (which can itself cause an FP exception depending on the value). The FCSR is restored before returning to the guest if the FPU is already enabled, and a die notifier is registered to catch the possible FP exception and step over the ctc1 instruction. The helper function kvm_lose_fpu() is added to save FPU context and disable the FPU, which is used when saving hardware state before a context switch or KVM exit (the vcpu_get_regs() callback). The helper function kvm_own_fpu() is added to enable the FPU and restore the FPU context if it isn't already loaded, which will be used in a later patch when the guest attempts to use the FPU for the first time and triggers a co-processor unusable exception. The helper function kvm_drop_fpu() is added to discard the FPU context and disable the FPU, which will be used in a later patch when the FPU state will become architecturally UNPREDICTABLE (change of FR mode) to force a reload of [stale] context in the new FR mode. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org 2014-11-18 21:09:12 +07:00			`dyntrans.o trap_emul.o fpu.o`
KVM: MIPS: Implement HYPCALL emulation Emulate the HYPCALL instruction added in the VZ ASE and used by the MIPS paravirtualised guest support that is already merged. The new hypcall.c handles arguments and the return value. No actual hypercalls are yet supported, but this still allows us to safely step over hypercalls and set an error code in the return value for forward compatibility. Non-zero HYPCALL codes are not handled. We also document the hypercall ABI which asm/kvm_para.h uses. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Andreas Herrmann <andreas.herrmann@caviumnetworks.com> Cc: David Daney <david.daney@cavium.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: linux-doc@vger.kernel.org 2017-03-14 17:15:14 +07:00			`kvm-objs += hypcall.o`
MIPS: KVM: Move non-TLB handling code out of tlb.c Various functions in tlb.c perform higher level MMU handling, but don't strictly need to be statically built into the kernel as they don't directly manipulate TLB entries. Move these functions out into a separate mmu.c which will be built into the KVM kernel module. This allows them to directly reference KVM functions in the KVM kernel module in future. Module exports of these functions have been removed, since they aren't needed outside of KVM. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2016-06-09 20:19:10 +07:00			`kvm-objs += mmu.o`
KVM/MIPS32: Release notes and KVM module Makefile Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by: Ralf Baechle <ralf@linux-mips.org> 2012-11-22 09:34:06 +07:00
			`obj-$(CONFIG_KVM) += kvm.o`
MIPS: KVM: Rename files to remove the prefix "kvm_" and "kvm_mips_" Since all the files are in arch/mips/kvm/, there's no need of the prefixes "kvm_" and "kvm_mips_". Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> 2014-06-27 02:11:38 +07:00			`obj-y += callback.o tlb.o`