2009-04-01 05:25:39 +07:00
|
|
|
/* linux/drivers/video/s3c-fb.c
|
|
|
|
*
|
|
|
|
* Copyright 2008 Openmoko Inc.
|
|
|
|
* Copyright 2008 Simtec Electronics
|
|
|
|
* Ben Dooks <ben@simtec.co.uk>
|
|
|
|
* http://armlinux.simtec.co.uk/
|
|
|
|
*
|
|
|
|
* Samsung SoC Framebuffer driver
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify
|
|
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
|
|
* published by the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/kernel.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <linux/init.h>
|
|
|
|
#include <linux/gfp.h>
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/fb.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include <mach/regs-fb.h>
|
|
|
|
#include <plat/fb.h>
|
|
|
|
|
|
|
|
/* This driver will export a number of framebuffer interfaces depending
|
|
|
|
* on the configuration passed in via the platform data. Each fb instance
|
|
|
|
* maps to a hardware window. Currently there is no support for runtime
|
|
|
|
* setting of the alpha-blending functions that each window has, so only
|
|
|
|
* window 0 is actually useful.
|
|
|
|
*
|
|
|
|
* Window 0 is treated specially, it is used for the basis of the LCD
|
|
|
|
* output timings and as the control for the output power-down state.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* note, some of the functions that get called are derived from including
|
|
|
|
* <mach/regs-fb.h> as they are specific to the architecture that the code
|
|
|
|
* is being built for.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifdef CONFIG_FB_S3C_DEBUG_REGWRITE
|
|
|
|
#undef writel
|
|
|
|
#define writel(v, r) do { \
|
|
|
|
printk(KERN_DEBUG "%s: %08x => %p\n", __func__, (unsigned int)v, r); \
|
|
|
|
__raw_writel(v, r); } while(0)
|
|
|
|
#endif /* FB_S3C_DEBUG_REGWRITE */
|
|
|
|
|
|
|
|
struct s3c_fb;
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct s3c_fb_win - per window private data for each framebuffer.
|
|
|
|
* @windata: The platform data supplied for the window configuration.
|
|
|
|
* @parent: The hardware that this window is part of.
|
|
|
|
* @fbinfo: Pointer pack to the framebuffer info for this window.
|
|
|
|
* @palette_buffer: Buffer/cache to hold palette entries.
|
|
|
|
* @pseudo_palette: For use in TRUECOLOUR modes for entries 0..15/
|
|
|
|
* @index: The window number of this window.
|
|
|
|
* @palette: The bitfields for changing r/g/b into a hardware palette entry.
|
|
|
|
*/
|
|
|
|
struct s3c_fb_win {
|
|
|
|
struct s3c_fb_pd_win *windata;
|
|
|
|
struct s3c_fb *parent;
|
|
|
|
struct fb_info *fbinfo;
|
|
|
|
struct s3c_fb_palette palette;
|
|
|
|
|
|
|
|
u32 *palette_buffer;
|
|
|
|
u32 pseudo_palette[16];
|
|
|
|
unsigned int index;
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* struct s3c_fb - overall hardware state of the hardware
|
|
|
|
* @dev: The device that we bound to, for printing, etc.
|
|
|
|
* @regs_res: The resource we claimed for the IO registers.
|
|
|
|
* @bus_clk: The clk (hclk) feeding our interface and possibly pixclk.
|
|
|
|
* @regs: The mapped hardware registers.
|
|
|
|
* @enabled: A bitmask of enabled hardware windows.
|
|
|
|
* @pdata: The platform configuration data passed with the device.
|
|
|
|
* @windows: The hardware windows that have been claimed.
|
|
|
|
*/
|
|
|
|
struct s3c_fb {
|
|
|
|
struct device *dev;
|
|
|
|
struct resource *regs_res;
|
|
|
|
struct clk *bus_clk;
|
|
|
|
void __iomem *regs;
|
|
|
|
|
|
|
|
unsigned char enabled;
|
|
|
|
|
|
|
|
struct s3c_fb_platdata *pdata;
|
|
|
|
struct s3c_fb_win *windows[S3C_FB_MAX_WIN];
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_win_has_palette() - determine if a mode has a palette
|
|
|
|
* @win: The window number being queried.
|
|
|
|
* @bpp: The number of bits per pixel to test.
|
|
|
|
*
|
|
|
|
* Work out if the given window supports palletised data at the specified bpp.
|
|
|
|
*/
|
|
|
|
static int s3c_fb_win_has_palette(unsigned int win, unsigned int bpp)
|
|
|
|
{
|
|
|
|
return s3c_fb_win_pal_size(win) <= (1 << bpp);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_check_var() - framebuffer layer request to verify a given mode.
|
|
|
|
* @var: The screen information to verify.
|
|
|
|
* @info: The framebuffer device.
|
|
|
|
*
|
|
|
|
* Framebuffer layer call to verify the given information and allow us to
|
|
|
|
* update various information depending on the hardware capabilities.
|
|
|
|
*/
|
|
|
|
static int s3c_fb_check_var(struct fb_var_screeninfo *var,
|
|
|
|
struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct s3c_fb_win *win = info->par;
|
|
|
|
struct s3c_fb_pd_win *windata = win->windata;
|
|
|
|
struct s3c_fb *sfb = win->parent;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "checking parameters\n");
|
|
|
|
|
|
|
|
var->xres_virtual = max((unsigned int)windata->virtual_x, var->xres);
|
|
|
|
var->yres_virtual = max((unsigned int)windata->virtual_y, var->yres);
|
|
|
|
|
|
|
|
if (!s3c_fb_validate_win_bpp(win->index, var->bits_per_pixel)) {
|
|
|
|
dev_dbg(sfb->dev, "win %d: unsupported bpp %d\n",
|
|
|
|
win->index, var->bits_per_pixel);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* always ensure these are zero, for drop through cases below */
|
|
|
|
var->transp.offset = 0;
|
|
|
|
var->transp.length = 0;
|
|
|
|
|
|
|
|
switch (var->bits_per_pixel) {
|
|
|
|
case 1:
|
|
|
|
case 2:
|
|
|
|
case 4:
|
|
|
|
case 8:
|
|
|
|
if (!s3c_fb_win_has_palette(win->index, var->bits_per_pixel)) {
|
|
|
|
/* non palletised, A:1,R:2,G:3,B:2 mode */
|
|
|
|
var->red.offset = 4;
|
|
|
|
var->green.offset = 2;
|
|
|
|
var->blue.offset = 0;
|
|
|
|
var->red.length = 5;
|
|
|
|
var->green.length = 3;
|
|
|
|
var->blue.length = 2;
|
|
|
|
var->transp.offset = 7;
|
|
|
|
var->transp.length = 1;
|
|
|
|
} else {
|
|
|
|
var->red.offset = 0;
|
|
|
|
var->red.length = var->bits_per_pixel;
|
|
|
|
var->green = var->red;
|
|
|
|
var->blue = var->red;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 19:
|
|
|
|
/* 666 with one bit alpha/transparency */
|
|
|
|
var->transp.offset = 18;
|
|
|
|
var->transp.length = 1;
|
|
|
|
case 18:
|
|
|
|
var->bits_per_pixel = 32;
|
|
|
|
|
|
|
|
/* 666 format */
|
|
|
|
var->red.offset = 12;
|
|
|
|
var->green.offset = 6;
|
|
|
|
var->blue.offset = 0;
|
|
|
|
var->red.length = 6;
|
|
|
|
var->green.length = 6;
|
|
|
|
var->blue.length = 6;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 16:
|
|
|
|
/* 16 bpp, 565 format */
|
|
|
|
var->red.offset = 11;
|
|
|
|
var->green.offset = 5;
|
|
|
|
var->blue.offset = 0;
|
|
|
|
var->red.length = 5;
|
|
|
|
var->green.length = 6;
|
|
|
|
var->blue.length = 5;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 28:
|
|
|
|
case 25:
|
|
|
|
var->transp.length = var->bits_per_pixel - 24;
|
|
|
|
var->transp.offset = 24;
|
|
|
|
/* drop through */
|
|
|
|
case 24:
|
|
|
|
/* our 24bpp is unpacked, so 32bpp */
|
|
|
|
var->bits_per_pixel = 32;
|
|
|
|
case 32:
|
|
|
|
var->red.offset = 16;
|
|
|
|
var->red.length = 8;
|
|
|
|
var->green.offset = 8;
|
|
|
|
var->green.length = 8;
|
|
|
|
var->blue.offset = 0;
|
|
|
|
var->blue.length = 8;
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
dev_err(sfb->dev, "invalid bpp\n");
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "%s: verified parameters\n", __func__);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_calc_pixclk() - calculate the divider to create the pixel clock.
|
drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer
Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.
Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).
therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".
for this, I added refresh value in platform data like below.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 60,
.pixclock = (66+4+2+480)*(15+5+3+800),
.left_margin = 66,
.right_margin = 2,
.upper_margin = 15,
.lower_margin = 3,
.hsync_len = 4,
.vsync_len = 5,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &xxx_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pc1xx_fb_gpio_setup_24bpp,
};
xxx_machine_init()
{
.
.
.
s3c_fb_set_platdata(&xxx_lcd_pdata);
}
platform data defined in machine code should be setting using
s3c_fb_set_platdata().
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 02:08:21 +07:00
|
|
|
* @id: window id.
|
2009-04-01 05:25:39 +07:00
|
|
|
* @sfb: The hardware state.
|
|
|
|
* @pixclock: The pixel clock wanted, in picoseconds.
|
|
|
|
*
|
|
|
|
* Given the specified pixel clock, work out the necessary divider to get
|
|
|
|
* close to the output frequency.
|
|
|
|
*/
|
drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer
Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.
Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).
therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".
for this, I added refresh value in platform data like below.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 60,
.pixclock = (66+4+2+480)*(15+5+3+800),
.left_margin = 66,
.right_margin = 2,
.upper_margin = 15,
.lower_margin = 3,
.hsync_len = 4,
.vsync_len = 5,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &xxx_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pc1xx_fb_gpio_setup_24bpp,
};
xxx_machine_init()
{
.
.
.
s3c_fb_set_platdata(&xxx_lcd_pdata);
}
platform data defined in machine code should be setting using
s3c_fb_set_platdata().
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 02:08:21 +07:00
|
|
|
static int s3c_fb_calc_pixclk(unsigned char id, struct s3c_fb *sfb, unsigned int pixclk)
|
2009-04-01 05:25:39 +07:00
|
|
|
{
|
drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer
Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.
Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).
therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".
for this, I added refresh value in platform data like below.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 60,
.pixclock = (66+4+2+480)*(15+5+3+800),
.left_margin = 66,
.right_margin = 2,
.upper_margin = 15,
.lower_margin = 3,
.hsync_len = 4,
.vsync_len = 5,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &xxx_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pc1xx_fb_gpio_setup_24bpp,
};
xxx_machine_init()
{
.
.
.
s3c_fb_set_platdata(&xxx_lcd_pdata);
}
platform data defined in machine code should be setting using
s3c_fb_set_platdata().
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 02:08:21 +07:00
|
|
|
struct s3c_fb_pd_win *win = sfb->pdata->win[id];
|
2009-04-01 05:25:39 +07:00
|
|
|
unsigned long clk = clk_get_rate(sfb->bus_clk);
|
|
|
|
unsigned int result;
|
|
|
|
|
drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer
Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.
Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).
therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".
for this, I added refresh value in platform data like below.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 60,
.pixclock = (66+4+2+480)*(15+5+3+800),
.left_margin = 66,
.right_margin = 2,
.upper_margin = 15,
.lower_margin = 3,
.hsync_len = 4,
.vsync_len = 5,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &xxx_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pc1xx_fb_gpio_setup_24bpp,
};
xxx_machine_init()
{
.
.
.
s3c_fb_set_platdata(&xxx_lcd_pdata);
}
platform data defined in machine code should be setting using
s3c_fb_set_platdata().
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 02:08:21 +07:00
|
|
|
pixclk *= win->win_mode.refresh;
|
|
|
|
result = clk / pixclk;
|
2009-04-01 05:25:39 +07:00
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "pixclk=%u, clk=%lu, div=%d (%lu)\n",
|
|
|
|
pixclk, clk, result, clk / result);
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_align_word() - align pixel count to word boundary
|
|
|
|
* @bpp: The number of bits per pixel
|
|
|
|
* @pix: The value to be aligned.
|
|
|
|
*
|
|
|
|
* Align the given pixel count so that it will start on an 32bit word
|
|
|
|
* boundary.
|
|
|
|
*/
|
|
|
|
static int s3c_fb_align_word(unsigned int bpp, unsigned int pix)
|
|
|
|
{
|
|
|
|
int pix_per_word;
|
|
|
|
|
|
|
|
if (bpp > 16)
|
|
|
|
return pix;
|
|
|
|
|
|
|
|
pix_per_word = (8 * 32) / bpp;
|
|
|
|
return ALIGN(pix, pix_per_word);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_set_par() - framebuffer request to set new framebuffer state.
|
|
|
|
* @info: The framebuffer to change.
|
|
|
|
*
|
|
|
|
* Framebuffer layer request to set a new mode for the specified framebuffer
|
|
|
|
*/
|
|
|
|
static int s3c_fb_set_par(struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct fb_var_screeninfo *var = &info->var;
|
|
|
|
struct s3c_fb_win *win = info->par;
|
|
|
|
struct s3c_fb *sfb = win->parent;
|
|
|
|
void __iomem *regs = sfb->regs;
|
|
|
|
int win_no = win->index;
|
drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer
Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.
Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).
therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".
for this, I added refresh value in platform data like below.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 60,
.pixclock = (66+4+2+480)*(15+5+3+800),
.left_margin = 66,
.right_margin = 2,
.upper_margin = 15,
.lower_margin = 3,
.hsync_len = 4,
.vsync_len = 5,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &xxx_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pc1xx_fb_gpio_setup_24bpp,
};
xxx_machine_init()
{
.
.
.
s3c_fb_set_platdata(&xxx_lcd_pdata);
}
platform data defined in machine code should be setting using
s3c_fb_set_platdata().
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 02:08:21 +07:00
|
|
|
u32 osdc_data = 0;
|
2009-04-01 05:25:39 +07:00
|
|
|
u32 data;
|
|
|
|
u32 pagewidth;
|
|
|
|
int clkdiv;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "setting framebuffer parameters\n");
|
|
|
|
|
|
|
|
switch (var->bits_per_pixel) {
|
|
|
|
case 32:
|
|
|
|
case 24:
|
|
|
|
case 16:
|
|
|
|
case 12:
|
|
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
if (s3c_fb_win_has_palette(win_no, 8))
|
|
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
|
|
else
|
|
|
|
info->fix.visual = FB_VISUAL_TRUECOLOR;
|
|
|
|
break;
|
|
|
|
case 1:
|
|
|
|
info->fix.visual = FB_VISUAL_MONO01;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
info->fix.line_length = (var->xres_virtual * var->bits_per_pixel) / 8;
|
|
|
|
|
|
|
|
/* disable the window whilst we update it */
|
|
|
|
writel(0, regs + WINCON(win_no));
|
|
|
|
|
|
|
|
/* use window 0 as the basis for the lcd output timings */
|
|
|
|
|
|
|
|
if (win_no == 0) {
|
drivers/video/s3c-fb.c: fix clock setting for Samsung SoC Framebuffer
Correct the CLKVAL_F field value of VIDEO MAIN CONTROLLER 0 REGITSTER.
Frame Rate is 1 / [ { (VSPW+1) + (VBPD+1) + (LIINEVAL + 1) + (VFPD+1)
} x {(HSPW+1) + (HBPD +1)
+ (HFPD+1) + (HOZVAL + 1) } x { ( CLKVAL+1 ) / ( Frequency of Clock
source ) } ] and VCLK = Video Clock Source / (CLKVAL +1).
therefore CLKVAL_F should be "CLKVAL_F = Frequency of Clock source / pixel
clock * refresh".
for this, I added refresh value in platform data like below.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.refresh = 60,
.pixclock = (66+4+2+480)*(15+5+3+800),
.left_margin = 66,
.right_margin = 2,
.upper_margin = 15,
.lower_margin = 3,
.hsync_len = 4,
.vsync_len = 5,
.xres = 480,
.yres = 800,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &xxx_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC
| VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
.setup_gpio = s5pc1xx_fb_gpio_setup_24bpp,
};
xxx_machine_init()
{
.
.
.
s3c_fb_set_platdata(&xxx_lcd_pdata);
}
platform data defined in machine code should be setting using
s3c_fb_set_platdata().
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Krzysztof Helt <krzysztof.h1@poczta.fm>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-06 02:08:21 +07:00
|
|
|
clkdiv = s3c_fb_calc_pixclk(win_no, sfb, var->pixclock);
|
2009-04-01 05:25:39 +07:00
|
|
|
|
|
|
|
data = sfb->pdata->vidcon0;
|
|
|
|
data &= ~(VIDCON0_CLKVAL_F_MASK | VIDCON0_CLKDIR);
|
|
|
|
|
|
|
|
if (clkdiv > 1)
|
|
|
|
data |= VIDCON0_CLKVAL_F(clkdiv-1) | VIDCON0_CLKDIR;
|
|
|
|
else
|
|
|
|
data &= ~VIDCON0_CLKDIR; /* 1:1 clock */
|
|
|
|
|
|
|
|
/* write the timing data to the panel */
|
|
|
|
|
|
|
|
data |= VIDCON0_ENVID | VIDCON0_ENVID_F;
|
|
|
|
writel(data, regs + VIDCON0);
|
|
|
|
|
|
|
|
data = VIDTCON0_VBPD(var->upper_margin - 1) |
|
|
|
|
VIDTCON0_VFPD(var->lower_margin - 1) |
|
|
|
|
VIDTCON0_VSPW(var->vsync_len - 1);
|
|
|
|
|
|
|
|
writel(data, regs + VIDTCON0);
|
|
|
|
|
|
|
|
data = VIDTCON1_HBPD(var->left_margin - 1) |
|
|
|
|
VIDTCON1_HFPD(var->right_margin - 1) |
|
|
|
|
VIDTCON1_HSPW(var->hsync_len - 1);
|
|
|
|
|
|
|
|
writel(data, regs + VIDTCON1);
|
|
|
|
|
|
|
|
data = VIDTCON2_LINEVAL(var->yres - 1) |
|
|
|
|
VIDTCON2_HOZVAL(var->xres - 1);
|
|
|
|
writel(data, regs + VIDTCON2);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* write the buffer address */
|
|
|
|
|
|
|
|
writel(info->fix.smem_start, regs + VIDW_BUF_START(win_no));
|
|
|
|
|
|
|
|
data = info->fix.smem_start + info->fix.line_length * var->yres;
|
|
|
|
writel(data, regs + VIDW_BUF_END(win_no));
|
|
|
|
|
|
|
|
pagewidth = (var->xres * var->bits_per_pixel) >> 3;
|
|
|
|
data = VIDW_BUF_SIZE_OFFSET(info->fix.line_length - pagewidth) |
|
|
|
|
VIDW_BUF_SIZE_PAGEWIDTH(pagewidth);
|
|
|
|
writel(data, regs + VIDW_BUF_SIZE(win_no));
|
|
|
|
|
|
|
|
/* write 'OSD' registers to control position of framebuffer */
|
|
|
|
|
|
|
|
data = VIDOSDxA_TOPLEFT_X(0) | VIDOSDxA_TOPLEFT_Y(0);
|
|
|
|
writel(data, regs + VIDOSD_A(win_no));
|
|
|
|
|
|
|
|
data = VIDOSDxB_BOTRIGHT_X(s3c_fb_align_word(var->bits_per_pixel,
|
|
|
|
var->xres - 1)) |
|
|
|
|
VIDOSDxB_BOTRIGHT_Y(var->yres - 1);
|
|
|
|
|
|
|
|
writel(data, regs + VIDOSD_B(win_no));
|
|
|
|
|
|
|
|
data = var->xres * var->yres;
|
Samsung SoC Framebuffer driver: add Alpha Channel support
Add support for the ARGB1888 and ARGB4888 hardware to the Samsung SoC
Framebuffer driver (s3c-fb.c).
ARGB1888 and ARGB4888 is decided by var->transp.length and this variable
is set by s3c_fb_check_var().
In s3c_fb_check_var(), if var->vits_per_pixel is 25 or 28, then
var->transp.length would be 1 or 3.
Therefore alpha mode(ARGB1888 or ARGB4888) could be decided through that
variable.
For using alpha mode, you need to set the following: This code should be
added to your machine code as platform data.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_pd_win xxx_fb_win1 = {
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 28,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &ncp_fb_win0,
.win[1] = &ncp_fb_win1,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = xxx_fb_gpio_setup,
};
s3c_fb_set_platdata(&xxx_lcd_pdata);
The above code sets pixelformat for window0 layer to RGB888 and window1
layer to ARGB4888.
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:34:27 +07:00
|
|
|
|
|
|
|
osdc_data = VIDISD14C_ALPHA1_R(0xf) |
|
|
|
|
VIDISD14C_ALPHA1_G(0xf) |
|
|
|
|
VIDISD14C_ALPHA1_B(0xf);
|
|
|
|
|
2009-04-01 05:25:39 +07:00
|
|
|
if (s3c_fb_has_osd_d(win_no)) {
|
|
|
|
writel(data, regs + VIDOSD_D(win_no));
|
Samsung SoC Framebuffer driver: add Alpha Channel support
Add support for the ARGB1888 and ARGB4888 hardware to the Samsung SoC
Framebuffer driver (s3c-fb.c).
ARGB1888 and ARGB4888 is decided by var->transp.length and this variable
is set by s3c_fb_check_var().
In s3c_fb_check_var(), if var->vits_per_pixel is 25 or 28, then
var->transp.length would be 1 or 3.
Therefore alpha mode(ARGB1888 or ARGB4888) could be decided through that
variable.
For using alpha mode, you need to set the following: This code should be
added to your machine code as platform data.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_pd_win xxx_fb_win1 = {
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 28,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &ncp_fb_win0,
.win[1] = &ncp_fb_win1,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = xxx_fb_gpio_setup,
};
s3c_fb_set_platdata(&xxx_lcd_pdata);
The above code sets pixelformat for window0 layer to RGB888 and window1
layer to ARGB4888.
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:34:27 +07:00
|
|
|
writel(osdc_data, regs + VIDOSD_C(win_no));
|
2009-04-01 05:25:39 +07:00
|
|
|
} else
|
|
|
|
writel(data, regs + VIDOSD_C(win_no));
|
|
|
|
|
|
|
|
data = WINCONx_ENWIN;
|
|
|
|
|
|
|
|
/* note, since we have to round up the bits-per-pixel, we end up
|
|
|
|
* relying on the bitfield information for r/g/b/a to work out
|
|
|
|
* exactly which mode of operation is intended. */
|
|
|
|
|
|
|
|
switch (var->bits_per_pixel) {
|
|
|
|
case 1:
|
|
|
|
data |= WINCON0_BPPMODE_1BPP;
|
|
|
|
data |= WINCONx_BITSWP;
|
|
|
|
data |= WINCONx_BURSTLEN_4WORD;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
data |= WINCON0_BPPMODE_2BPP;
|
|
|
|
data |= WINCONx_BITSWP;
|
|
|
|
data |= WINCONx_BURSTLEN_8WORD;
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
data |= WINCON0_BPPMODE_4BPP;
|
|
|
|
data |= WINCONx_BITSWP;
|
|
|
|
data |= WINCONx_BURSTLEN_8WORD;
|
|
|
|
break;
|
|
|
|
case 8:
|
|
|
|
if (var->transp.length != 0)
|
|
|
|
data |= WINCON1_BPPMODE_8BPP_1232;
|
|
|
|
else
|
|
|
|
data |= WINCON0_BPPMODE_8BPP_PALETTE;
|
|
|
|
data |= WINCONx_BURSTLEN_8WORD;
|
|
|
|
data |= WINCONx_BYTSWP;
|
|
|
|
break;
|
|
|
|
case 16:
|
|
|
|
if (var->transp.length != 0)
|
|
|
|
data |= WINCON1_BPPMODE_16BPP_A1555;
|
|
|
|
else
|
|
|
|
data |= WINCON0_BPPMODE_16BPP_565;
|
|
|
|
data |= WINCONx_HAWSWP;
|
|
|
|
data |= WINCONx_BURSTLEN_16WORD;
|
|
|
|
break;
|
|
|
|
case 24:
|
|
|
|
case 32:
|
|
|
|
if (var->red.length == 6) {
|
|
|
|
if (var->transp.length != 0)
|
|
|
|
data |= WINCON1_BPPMODE_19BPP_A1666;
|
|
|
|
else
|
|
|
|
data |= WINCON1_BPPMODE_18BPP_666;
|
Samsung SoC Framebuffer driver: add Alpha Channel support
Add support for the ARGB1888 and ARGB4888 hardware to the Samsung SoC
Framebuffer driver (s3c-fb.c).
ARGB1888 and ARGB4888 is decided by var->transp.length and this variable
is set by s3c_fb_check_var().
In s3c_fb_check_var(), if var->vits_per_pixel is 25 or 28, then
var->transp.length would be 1 or 3.
Therefore alpha mode(ARGB1888 or ARGB4888) could be decided through that
variable.
For using alpha mode, you need to set the following: This code should be
added to your machine code as platform data.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_pd_win xxx_fb_win1 = {
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 28,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &ncp_fb_win0,
.win[1] = &ncp_fb_win1,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = xxx_fb_gpio_setup,
};
s3c_fb_set_platdata(&xxx_lcd_pdata);
The above code sets pixelformat for window0 layer to RGB888 and window1
layer to ARGB4888.
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:34:27 +07:00
|
|
|
} else if (var->transp.length == 1)
|
|
|
|
data |= WINCON1_BPPMODE_25BPP_A1888
|
|
|
|
| WINCON1_BLD_PIX;
|
|
|
|
else if (var->transp.length == 4)
|
|
|
|
data |= WINCON1_BPPMODE_28BPP_A4888
|
|
|
|
| WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
|
2009-04-01 05:25:39 +07:00
|
|
|
else
|
|
|
|
data |= WINCON0_BPPMODE_24BPP_888;
|
|
|
|
|
|
|
|
data |= WINCONx_BURSTLEN_16WORD;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
Samsung SoC Framebuffer driver: add Alpha Channel support
Add support for the ARGB1888 and ARGB4888 hardware to the Samsung SoC
Framebuffer driver (s3c-fb.c).
ARGB1888 and ARGB4888 is decided by var->transp.length and this variable
is set by s3c_fb_check_var().
In s3c_fb_check_var(), if var->vits_per_pixel is 25 or 28, then
var->transp.length would be 1 or 3.
Therefore alpha mode(ARGB1888 or ARGB4888) could be decided through that
variable.
For using alpha mode, you need to set the following: This code should be
added to your machine code as platform data.
static struct s3c_fb_pd_win xxx_fb_win0 = {
/* this is to ensure we use win0 */
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 24,
};
static struct s3c_fb_pd_win xxx_fb_win1 = {
.win_mode = {
.pixclock = (8+8+8+240)*(38+4+38+400),
.left_margin = 8,
.right_margin = 8,
.upper_margin = 38,
.lower_margin = 38,
.hsync_len = 8,
.vsync_len = 4,
.xres = 240,
.yres = 400,
},
.max_bpp = 32,
.default_bpp = 28,
};
static struct s3c_fb_platdata xxx_lcd_pdata __initdata = {
.win[0] = &ncp_fb_win0,
.win[1] = &ncp_fb_win1,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
.setup_gpio = xxx_fb_gpio_setup,
};
s3c_fb_set_platdata(&xxx_lcd_pdata);
The above code sets pixelformat for window0 layer to RGB888 and window1
layer to ARGB4888.
Signed-off-by: InKi Dae <inki.dae@samsung.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Kyungmin Park <kmpark@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-06-17 05:34:27 +07:00
|
|
|
/* It has no color key control register for window0 */
|
|
|
|
if (win_no > 0) {
|
|
|
|
u32 keycon0_data = 0, keycon1_data = 0;
|
|
|
|
|
|
|
|
keycon0_data = ~(WxKEYCON0_KEYBL_EN |
|
|
|
|
WxKEYCON0_KEYEN_F |
|
|
|
|
WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
|
|
|
|
|
|
|
|
keycon1_data = WxKEYCON1_COLVAL(0xffffff);
|
|
|
|
|
|
|
|
writel(keycon0_data, regs + WxKEYCONy(win_no-1, 0));
|
|
|
|
writel(keycon1_data, regs + WxKEYCONy(win_no-1, 1));
|
|
|
|
}
|
|
|
|
|
2009-04-01 05:25:39 +07:00
|
|
|
writel(data, regs + WINCON(win_no));
|
|
|
|
writel(0x0, regs + WINxMAP(win_no));
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_update_palette() - set or schedule a palette update.
|
|
|
|
* @sfb: The hardware information.
|
|
|
|
* @win: The window being updated.
|
|
|
|
* @reg: The palette index being changed.
|
|
|
|
* @value: The computed palette value.
|
|
|
|
*
|
|
|
|
* Change the value of a palette register, either by directly writing to
|
|
|
|
* the palette (this requires the palette RAM to be disconnected from the
|
|
|
|
* hardware whilst this is in progress) or schedule the update for later.
|
|
|
|
*
|
|
|
|
* At the moment, since we have no VSYNC interrupt support, we simply set
|
|
|
|
* the palette entry directly.
|
|
|
|
*/
|
|
|
|
static void s3c_fb_update_palette(struct s3c_fb *sfb,
|
|
|
|
struct s3c_fb_win *win,
|
|
|
|
unsigned int reg,
|
|
|
|
u32 value)
|
|
|
|
{
|
|
|
|
void __iomem *palreg;
|
|
|
|
u32 palcon;
|
|
|
|
|
|
|
|
palreg = sfb->regs + s3c_fb_pal_reg(win->index, reg);
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "%s: win %d, reg %d (%p): %08x\n",
|
|
|
|
__func__, win->index, reg, palreg, value);
|
|
|
|
|
|
|
|
win->palette_buffer[reg] = value;
|
|
|
|
|
|
|
|
palcon = readl(sfb->regs + WPALCON);
|
|
|
|
writel(palcon | WPALCON_PAL_UPDATE, sfb->regs + WPALCON);
|
|
|
|
|
|
|
|
if (s3c_fb_pal_is16(win->index))
|
|
|
|
writew(value, palreg);
|
|
|
|
else
|
|
|
|
writel(value, palreg);
|
|
|
|
|
|
|
|
writel(palcon, sfb->regs + WPALCON);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline unsigned int chan_to_field(unsigned int chan,
|
|
|
|
struct fb_bitfield *bf)
|
|
|
|
{
|
|
|
|
chan &= 0xffff;
|
|
|
|
chan >>= 16 - bf->length;
|
|
|
|
return chan << bf->offset;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_setcolreg() - framebuffer layer request to change palette.
|
|
|
|
* @regno: The palette index to change.
|
|
|
|
* @red: The red field for the palette data.
|
|
|
|
* @green: The green field for the palette data.
|
|
|
|
* @blue: The blue field for the palette data.
|
|
|
|
* @trans: The transparency (alpha) field for the palette data.
|
|
|
|
* @info: The framebuffer being changed.
|
|
|
|
*/
|
|
|
|
static int s3c_fb_setcolreg(unsigned regno,
|
|
|
|
unsigned red, unsigned green, unsigned blue,
|
|
|
|
unsigned transp, struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct s3c_fb_win *win = info->par;
|
|
|
|
struct s3c_fb *sfb = win->parent;
|
|
|
|
unsigned int val;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "%s: win %d: %d => rgb=%d/%d/%d\n",
|
|
|
|
__func__, win->index, regno, red, green, blue);
|
|
|
|
|
|
|
|
switch (info->fix.visual) {
|
|
|
|
case FB_VISUAL_TRUECOLOR:
|
|
|
|
/* true-colour, use pseudo-palette */
|
|
|
|
|
|
|
|
if (regno < 16) {
|
|
|
|
u32 *pal = info->pseudo_palette;
|
|
|
|
|
|
|
|
val = chan_to_field(red, &info->var.red);
|
|
|
|
val |= chan_to_field(green, &info->var.green);
|
|
|
|
val |= chan_to_field(blue, &info->var.blue);
|
|
|
|
|
|
|
|
pal[regno] = val;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FB_VISUAL_PSEUDOCOLOR:
|
|
|
|
if (regno < s3c_fb_win_pal_size(win->index)) {
|
|
|
|
val = chan_to_field(red, &win->palette.r);
|
|
|
|
val |= chan_to_field(green, &win->palette.g);
|
|
|
|
val |= chan_to_field(blue, &win->palette.b);
|
|
|
|
|
|
|
|
s3c_fb_update_palette(sfb, win, regno, val);
|
|
|
|
}
|
|
|
|
|
|
|
|
break;
|
|
|
|
|
|
|
|
default:
|
|
|
|
return 1; /* unknown type */
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_enable() - Set the state of the main LCD output
|
|
|
|
* @sfb: The main framebuffer state.
|
|
|
|
* @enable: The state to set.
|
|
|
|
*/
|
|
|
|
static void s3c_fb_enable(struct s3c_fb *sfb, int enable)
|
|
|
|
{
|
|
|
|
u32 vidcon0 = readl(sfb->regs + VIDCON0);
|
|
|
|
|
|
|
|
if (enable)
|
|
|
|
vidcon0 |= VIDCON0_ENVID | VIDCON0_ENVID_F;
|
|
|
|
else {
|
|
|
|
/* see the note in the framebuffer datasheet about
|
|
|
|
* why you cannot take both of these bits down at the
|
|
|
|
* same time. */
|
|
|
|
|
|
|
|
if (!(vidcon0 & VIDCON0_ENVID))
|
|
|
|
return;
|
|
|
|
|
|
|
|
vidcon0 |= VIDCON0_ENVID;
|
|
|
|
vidcon0 &= ~VIDCON0_ENVID_F;
|
|
|
|
}
|
|
|
|
|
|
|
|
writel(vidcon0, sfb->regs + VIDCON0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_blank() - blank or unblank the given window
|
|
|
|
* @blank_mode: The blank state from FB_BLANK_*
|
|
|
|
* @info: The framebuffer to blank.
|
|
|
|
*
|
|
|
|
* Framebuffer layer request to change the power state.
|
|
|
|
*/
|
|
|
|
static int s3c_fb_blank(int blank_mode, struct fb_info *info)
|
|
|
|
{
|
|
|
|
struct s3c_fb_win *win = info->par;
|
|
|
|
struct s3c_fb *sfb = win->parent;
|
|
|
|
unsigned int index = win->index;
|
|
|
|
u32 wincon;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "blank mode %d\n", blank_mode);
|
|
|
|
|
|
|
|
wincon = readl(sfb->regs + WINCON(index));
|
|
|
|
|
|
|
|
switch (blank_mode) {
|
|
|
|
case FB_BLANK_POWERDOWN:
|
|
|
|
wincon &= ~WINCONx_ENWIN;
|
|
|
|
sfb->enabled &= ~(1 << index);
|
|
|
|
/* fall through to FB_BLANK_NORMAL */
|
|
|
|
|
|
|
|
case FB_BLANK_NORMAL:
|
|
|
|
/* disable the DMA and display 0x0 (black) */
|
|
|
|
writel(WINxMAP_MAP | WINxMAP_MAP_COLOUR(0x0),
|
|
|
|
sfb->regs + WINxMAP(index));
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FB_BLANK_UNBLANK:
|
|
|
|
writel(0x0, sfb->regs + WINxMAP(index));
|
|
|
|
wincon |= WINCONx_ENWIN;
|
|
|
|
sfb->enabled |= (1 << index);
|
|
|
|
break;
|
|
|
|
|
|
|
|
case FB_BLANK_VSYNC_SUSPEND:
|
|
|
|
case FB_BLANK_HSYNC_SUSPEND:
|
|
|
|
default:
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
writel(wincon, sfb->regs + WINCON(index));
|
|
|
|
|
|
|
|
/* Check the enabled state to see if we need to be running the
|
|
|
|
* main LCD interface, as if there are no active windows then
|
|
|
|
* it is highly likely that we also do not need to output
|
|
|
|
* anything.
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* We could do something like the following code, but the current
|
|
|
|
* system of using framebuffer events means that we cannot make
|
|
|
|
* the distinction between just window 0 being inactive and all
|
|
|
|
* the windows being down.
|
|
|
|
*
|
|
|
|
* s3c_fb_enable(sfb, sfb->enabled ? 1 : 0);
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* we're stuck with this until we can do something about overriding
|
|
|
|
* the power control using the blanking event for a single fb.
|
|
|
|
*/
|
|
|
|
if (index == 0)
|
|
|
|
s3c_fb_enable(sfb, blank_mode != FB_BLANK_POWERDOWN ? 1 : 0);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct fb_ops s3c_fb_ops = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.fb_check_var = s3c_fb_check_var,
|
|
|
|
.fb_set_par = s3c_fb_set_par,
|
|
|
|
.fb_blank = s3c_fb_blank,
|
|
|
|
.fb_setcolreg = s3c_fb_setcolreg,
|
|
|
|
.fb_fillrect = cfb_fillrect,
|
|
|
|
.fb_copyarea = cfb_copyarea,
|
|
|
|
.fb_imageblit = cfb_imageblit,
|
|
|
|
};
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_alloc_memory() - allocate display memory for framebuffer window
|
|
|
|
* @sfb: The base resources for the hardware.
|
|
|
|
* @win: The window to initialise memory for.
|
|
|
|
*
|
|
|
|
* Allocate memory for the given framebuffer.
|
|
|
|
*/
|
|
|
|
static int __devinit s3c_fb_alloc_memory(struct s3c_fb *sfb,
|
|
|
|
struct s3c_fb_win *win)
|
|
|
|
{
|
|
|
|
struct s3c_fb_pd_win *windata = win->windata;
|
|
|
|
unsigned int real_size, virt_size, size;
|
|
|
|
struct fb_info *fbi = win->fbinfo;
|
|
|
|
dma_addr_t map_dma;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "allocating memory for display\n");
|
|
|
|
|
|
|
|
real_size = windata->win_mode.xres * windata->win_mode.yres;
|
|
|
|
virt_size = windata->virtual_x * windata->virtual_y;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "real_size=%u (%u.%u), virt_size=%u (%u.%u)\n",
|
|
|
|
real_size, windata->win_mode.xres, windata->win_mode.yres,
|
|
|
|
virt_size, windata->virtual_x, windata->virtual_y);
|
|
|
|
|
|
|
|
size = (real_size > virt_size) ? real_size : virt_size;
|
|
|
|
size *= (windata->max_bpp > 16) ? 32 : windata->max_bpp;
|
|
|
|
size /= 8;
|
|
|
|
|
|
|
|
fbi->fix.smem_len = size;
|
|
|
|
size = PAGE_ALIGN(size);
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "want %u bytes for window\n", size);
|
|
|
|
|
|
|
|
fbi->screen_base = dma_alloc_writecombine(sfb->dev, size,
|
|
|
|
&map_dma, GFP_KERNEL);
|
|
|
|
if (!fbi->screen_base)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "mapped %x to %p\n",
|
|
|
|
(unsigned int)map_dma, fbi->screen_base);
|
|
|
|
|
|
|
|
memset(fbi->screen_base, 0x0, size);
|
|
|
|
fbi->fix.smem_start = map_dma;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_free_memory() - free the display memory for the given window
|
|
|
|
* @sfb: The base resources for the hardware.
|
|
|
|
* @win: The window to free the display memory for.
|
|
|
|
*
|
|
|
|
* Free the display memory allocated by s3c_fb_alloc_memory().
|
|
|
|
*/
|
|
|
|
static void s3c_fb_free_memory(struct s3c_fb *sfb, struct s3c_fb_win *win)
|
|
|
|
{
|
|
|
|
struct fb_info *fbi = win->fbinfo;
|
|
|
|
|
|
|
|
dma_free_writecombine(sfb->dev, PAGE_ALIGN(fbi->fix.smem_len),
|
|
|
|
fbi->screen_base, fbi->fix.smem_start);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_release_win() - release resources for a framebuffer window.
|
|
|
|
* @win: The window to cleanup the resources for.
|
|
|
|
*
|
|
|
|
* Release the resources that where claimed for the hardware window,
|
|
|
|
* such as the framebuffer instance and any memory claimed for it.
|
|
|
|
*/
|
|
|
|
static void s3c_fb_release_win(struct s3c_fb *sfb, struct s3c_fb_win *win)
|
|
|
|
{
|
2009-06-17 05:34:33 +07:00
|
|
|
if (win->fbinfo) {
|
|
|
|
unregister_framebuffer(win->fbinfo);
|
|
|
|
fb_dealloc_cmap(&win->fbinfo->cmap);
|
|
|
|
s3c_fb_free_memory(sfb, win);
|
|
|
|
framebuffer_release(win->fbinfo);
|
|
|
|
}
|
2009-04-01 05:25:39 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_probe_win() - register an hardware window
|
|
|
|
* @sfb: The base resources for the hardware
|
|
|
|
* @res: Pointer to where to place the resultant window.
|
|
|
|
*
|
|
|
|
* Allocate and do the basic initialisation for one of the hardware's graphics
|
|
|
|
* windows.
|
|
|
|
*/
|
|
|
|
static int __devinit s3c_fb_probe_win(struct s3c_fb *sfb, unsigned int win_no,
|
|
|
|
struct s3c_fb_win **res)
|
|
|
|
{
|
|
|
|
struct fb_var_screeninfo *var;
|
|
|
|
struct fb_videomode *initmode;
|
|
|
|
struct s3c_fb_pd_win *windata;
|
|
|
|
struct s3c_fb_win *win;
|
|
|
|
struct fb_info *fbinfo;
|
|
|
|
int palette_size;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "probing window %d\n", win_no);
|
|
|
|
|
|
|
|
palette_size = s3c_fb_win_pal_size(win_no);
|
|
|
|
|
|
|
|
fbinfo = framebuffer_alloc(sizeof(struct s3c_fb_win) +
|
|
|
|
palette_size * sizeof(u32), sfb->dev);
|
|
|
|
if (!fbinfo) {
|
|
|
|
dev_err(sfb->dev, "failed to allocate framebuffer\n");
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
windata = sfb->pdata->win[win_no];
|
|
|
|
initmode = &windata->win_mode;
|
|
|
|
|
|
|
|
WARN_ON(windata->max_bpp == 0);
|
|
|
|
WARN_ON(windata->win_mode.xres == 0);
|
|
|
|
WARN_ON(windata->win_mode.yres == 0);
|
|
|
|
|
|
|
|
win = fbinfo->par;
|
|
|
|
var = &fbinfo->var;
|
|
|
|
win->fbinfo = fbinfo;
|
|
|
|
win->parent = sfb;
|
|
|
|
win->windata = windata;
|
|
|
|
win->index = win_no;
|
|
|
|
win->palette_buffer = (u32 *)(win + 1);
|
|
|
|
|
|
|
|
ret = s3c_fb_alloc_memory(sfb, win);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(sfb->dev, "failed to allocate display memory\n");
|
2009-06-17 05:34:33 +07:00
|
|
|
return ret;
|
2009-04-01 05:25:39 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* setup the r/b/g positions for the window's palette */
|
|
|
|
s3c_fb_init_palette(win_no, &win->palette);
|
|
|
|
|
|
|
|
/* setup the initial video mode from the window */
|
|
|
|
fb_videomode_to_var(&fbinfo->var, initmode);
|
|
|
|
|
|
|
|
fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
|
|
|
|
fbinfo->fix.accel = FB_ACCEL_NONE;
|
|
|
|
fbinfo->var.activate = FB_ACTIVATE_NOW;
|
|
|
|
fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
|
|
|
|
fbinfo->var.bits_per_pixel = windata->default_bpp;
|
|
|
|
fbinfo->fbops = &s3c_fb_ops;
|
|
|
|
fbinfo->flags = FBINFO_FLAG_DEFAULT;
|
|
|
|
fbinfo->pseudo_palette = &win->pseudo_palette;
|
|
|
|
|
|
|
|
/* prepare to actually start the framebuffer */
|
|
|
|
|
|
|
|
ret = s3c_fb_check_var(&fbinfo->var, fbinfo);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(sfb->dev, "check_var failed on initial video params\n");
|
2009-06-17 05:34:33 +07:00
|
|
|
return ret;
|
2009-04-01 05:25:39 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* create initial colour map */
|
|
|
|
|
|
|
|
ret = fb_alloc_cmap(&fbinfo->cmap, s3c_fb_win_pal_size(win_no), 1);
|
|
|
|
if (ret == 0)
|
|
|
|
fb_set_cmap(&fbinfo->cmap, fbinfo);
|
|
|
|
else
|
|
|
|
dev_err(sfb->dev, "failed to allocate fb cmap\n");
|
|
|
|
|
|
|
|
s3c_fb_set_par(fbinfo);
|
|
|
|
|
|
|
|
dev_dbg(sfb->dev, "about to register framebuffer\n");
|
|
|
|
|
|
|
|
/* run the check_var and set_par on our configuration. */
|
|
|
|
|
|
|
|
ret = register_framebuffer(fbinfo);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(sfb->dev, "failed to register framebuffer\n");
|
2009-06-17 05:34:33 +07:00
|
|
|
return ret;
|
2009-04-01 05:25:39 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
*res = win;
|
|
|
|
dev_info(sfb->dev, "window %d: fb %s\n", win_no, fbinfo->fix.id);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_clear_win() - clear hardware window registers.
|
|
|
|
* @sfb: The base resources for the hardware.
|
|
|
|
* @win: The window to process.
|
|
|
|
*
|
|
|
|
* Reset the specific window registers to a known state.
|
|
|
|
*/
|
|
|
|
static void s3c_fb_clear_win(struct s3c_fb *sfb, int win)
|
|
|
|
{
|
|
|
|
void __iomem *regs = sfb->regs;
|
|
|
|
|
|
|
|
writel(0, regs + WINCON(win));
|
|
|
|
writel(0xffffff, regs + WxKEYCONy(win, 0));
|
|
|
|
writel(0xffffff, regs + WxKEYCONy(win, 1));
|
|
|
|
|
|
|
|
writel(0, regs + VIDOSD_A(win));
|
|
|
|
writel(0, regs + VIDOSD_B(win));
|
|
|
|
writel(0, regs + VIDOSD_C(win));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int __devinit s3c_fb_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct device *dev = &pdev->dev;
|
|
|
|
struct s3c_fb_platdata *pd;
|
|
|
|
struct s3c_fb *sfb;
|
|
|
|
struct resource *res;
|
|
|
|
int win;
|
|
|
|
int ret = 0;
|
|
|
|
|
|
|
|
pd = pdev->dev.platform_data;
|
|
|
|
if (!pd) {
|
|
|
|
dev_err(dev, "no platform data specified\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
sfb = kzalloc(sizeof(struct s3c_fb), GFP_KERNEL);
|
|
|
|
if (!sfb) {
|
|
|
|
dev_err(dev, "no memory for framebuffers\n");
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
|
|
|
|
sfb->dev = dev;
|
|
|
|
sfb->pdata = pd;
|
|
|
|
|
|
|
|
sfb->bus_clk = clk_get(dev, "lcd");
|
|
|
|
if (IS_ERR(sfb->bus_clk)) {
|
|
|
|
dev_err(dev, "failed to get bus clock\n");
|
|
|
|
goto err_sfb;
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_enable(sfb->bus_clk);
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
if (!res) {
|
|
|
|
dev_err(dev, "failed to find registers\n");
|
|
|
|
ret = -ENOENT;
|
|
|
|
goto err_clk;
|
|
|
|
}
|
|
|
|
|
|
|
|
sfb->regs_res = request_mem_region(res->start, resource_size(res),
|
|
|
|
dev_name(dev));
|
|
|
|
if (!sfb->regs_res) {
|
|
|
|
dev_err(dev, "failed to claim register region\n");
|
|
|
|
ret = -ENOENT;
|
|
|
|
goto err_clk;
|
|
|
|
}
|
|
|
|
|
|
|
|
sfb->regs = ioremap(res->start, resource_size(res));
|
|
|
|
if (!sfb->regs) {
|
|
|
|
dev_err(dev, "failed to map registers\n");
|
|
|
|
ret = -ENXIO;
|
|
|
|
goto err_req_region;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_dbg(dev, "got resources (regs %p), probing windows\n", sfb->regs);
|
|
|
|
|
|
|
|
/* setup gpio and output polarity controls */
|
|
|
|
|
|
|
|
pd->setup_gpio();
|
|
|
|
|
|
|
|
writel(pd->vidcon1, sfb->regs + VIDCON1);
|
|
|
|
|
|
|
|
/* zero all windows before we do anything */
|
|
|
|
|
|
|
|
for (win = 0; win < S3C_FB_MAX_WIN; win++)
|
|
|
|
s3c_fb_clear_win(sfb, win);
|
|
|
|
|
|
|
|
/* we have the register setup, start allocating framebuffers */
|
|
|
|
|
|
|
|
for (win = 0; win < S3C_FB_MAX_WIN; win++) {
|
|
|
|
if (!pd->win[win])
|
|
|
|
continue;
|
|
|
|
|
|
|
|
ret = s3c_fb_probe_win(sfb, win, &sfb->windows[win]);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(dev, "failed to create window %d\n", win);
|
|
|
|
for (; win >= 0; win--)
|
|
|
|
s3c_fb_release_win(sfb, sfb->windows[win]);
|
|
|
|
goto err_ioremap;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, sfb);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_ioremap:
|
|
|
|
iounmap(sfb->regs);
|
|
|
|
|
|
|
|
err_req_region:
|
|
|
|
release_resource(sfb->regs_res);
|
|
|
|
kfree(sfb->regs_res);
|
|
|
|
|
|
|
|
err_clk:
|
|
|
|
clk_disable(sfb->bus_clk);
|
|
|
|
clk_put(sfb->bus_clk);
|
|
|
|
|
|
|
|
err_sfb:
|
|
|
|
kfree(sfb);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* s3c_fb_remove() - Cleanup on module finalisation
|
|
|
|
* @pdev: The platform device we are bound to.
|
|
|
|
*
|
|
|
|
* Shutdown and then release all the resources that the driver allocated
|
|
|
|
* on initialisation.
|
|
|
|
*/
|
|
|
|
static int __devexit s3c_fb_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct s3c_fb *sfb = platform_get_drvdata(pdev);
|
|
|
|
int win;
|
|
|
|
|
2009-07-30 05:02:10 +07:00
|
|
|
for (win = 0; win < S3C_FB_MAX_WIN; win++)
|
2009-05-29 04:34:35 +07:00
|
|
|
if (sfb->windows[win])
|
|
|
|
s3c_fb_release_win(sfb, sfb->windows[win]);
|
2009-04-01 05:25:39 +07:00
|
|
|
|
|
|
|
iounmap(sfb->regs);
|
|
|
|
|
|
|
|
clk_disable(sfb->bus_clk);
|
|
|
|
clk_put(sfb->bus_clk);
|
|
|
|
|
|
|
|
release_resource(sfb->regs_res);
|
|
|
|
kfree(sfb->regs_res);
|
|
|
|
|
|
|
|
kfree(sfb);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
|
|
|
|
{
|
|
|
|
struct s3c_fb *sfb = platform_get_drvdata(pdev);
|
|
|
|
struct s3c_fb_win *win;
|
|
|
|
int win_no;
|
|
|
|
|
2009-07-30 05:02:10 +07:00
|
|
|
for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
|
2009-04-01 05:25:39 +07:00
|
|
|
win = sfb->windows[win_no];
|
|
|
|
if (!win)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/* use the blank function to push into power-down */
|
|
|
|
s3c_fb_blank(FB_BLANK_POWERDOWN, win->fbinfo);
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_disable(sfb->bus_clk);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int s3c_fb_resume(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct s3c_fb *sfb = platform_get_drvdata(pdev);
|
2009-05-29 04:34:35 +07:00
|
|
|
struct s3c_fb_platdata *pd = sfb->pdata;
|
2009-04-01 05:25:39 +07:00
|
|
|
struct s3c_fb_win *win;
|
|
|
|
int win_no;
|
|
|
|
|
|
|
|
clk_enable(sfb->bus_clk);
|
|
|
|
|
2009-05-29 04:34:35 +07:00
|
|
|
/* setup registers */
|
|
|
|
writel(pd->vidcon1, sfb->regs + VIDCON1);
|
|
|
|
|
|
|
|
/* zero all windows before we do anything */
|
|
|
|
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
|
|
|
|
s3c_fb_clear_win(sfb, win_no);
|
|
|
|
|
|
|
|
/* restore framebuffers */
|
2009-04-01 05:25:39 +07:00
|
|
|
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
|
|
|
|
win = sfb->windows[win_no];
|
|
|
|
if (!win)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
dev_dbg(&pdev->dev, "resuming window %d\n", win_no);
|
|
|
|
s3c_fb_set_par(win->fbinfo);
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#else
|
|
|
|
#define s3c_fb_suspend NULL
|
|
|
|
#define s3c_fb_resume NULL
|
|
|
|
#endif
|
|
|
|
|
|
|
|
static struct platform_driver s3c_fb_driver = {
|
|
|
|
.probe = s3c_fb_probe,
|
2009-09-23 06:47:55 +07:00
|
|
|
.remove = __devexit_p(s3c_fb_remove),
|
2009-04-01 05:25:39 +07:00
|
|
|
.suspend = s3c_fb_suspend,
|
|
|
|
.resume = s3c_fb_resume,
|
|
|
|
.driver = {
|
|
|
|
.name = "s3c-fb",
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init s3c_fb_init(void)
|
|
|
|
{
|
|
|
|
return platform_driver_register(&s3c_fb_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit s3c_fb_cleanup(void)
|
|
|
|
{
|
|
|
|
platform_driver_unregister(&s3c_fb_driver);
|
|
|
|
}
|
|
|
|
|
|
|
|
module_init(s3c_fb_init);
|
|
|
|
module_exit(s3c_fb_cleanup);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
|
|
|
|
MODULE_DESCRIPTION("Samsung S3C SoC Framebuffer driver");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_ALIAS("platform:s3c-fb");
|