linux_dsm_epyc7002/include/linux/irqchip/mips-gic.h

250 lines
9.0 KiB
C
Raw Normal View History

/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2000, 07 MIPS Technologies, Inc.
*/
#ifndef __LINUX_IRQCHIP_MIPS_GIC_H
#define __LINUX_IRQCHIP_MIPS_GIC_H
#include <linux/clocksource.h>
#define GIC_MAX_INTRS 256
/* Constants */
#define GIC_POL_POS 1
#define GIC_POL_NEG 0
#define GIC_TRIG_EDGE 1
#define GIC_TRIG_LEVEL 0
#define GIC_TRIG_DUAL_ENABLE 1
#define GIC_TRIG_DUAL_DISABLE 0
#define MSK(n) ((1 << (n)) - 1)
/* Accessors */
#define GIC_REG(segment, offset) (segment##_##SECTION_OFS + offset##_##OFS)
/* GIC Address Space */
#define SHARED_SECTION_OFS 0x0000
#define SHARED_SECTION_SIZE 0x8000
#define VPE_LOCAL_SECTION_OFS 0x8000
#define VPE_LOCAL_SECTION_SIZE 0x4000
#define VPE_OTHER_SECTION_OFS 0xc000
#define VPE_OTHER_SECTION_SIZE 0x4000
#define USM_VISIBLE_SECTION_OFS 0x10000
#define USM_VISIBLE_SECTION_SIZE 0x10000
/* Register Map for Shared Section */
#define GIC_SH_CONFIG_OFS 0x0000
/* Shared Global Counter */
#define GIC_SH_COUNTER_31_00_OFS 0x0010
#define GIC_SH_COUNTER_63_32_OFS 0x0014
#define GIC_SH_REVISIONID_OFS 0x0020
/* Convert an interrupt number to a byte offset/bit for multi-word registers */
#define GIC_INTR_OFS(intr) (((intr) / 32) * 4)
#define GIC_INTR_BIT(intr) ((intr) % 32)
/* Polarity : Reset Value is always 0 */
#define GIC_SH_SET_POLARITY_OFS 0x0100
/* Triggering : Reset Value is always 0 */
#define GIC_SH_SET_TRIGGER_OFS 0x0180
/* Dual edge triggering : Reset Value is always 0 */
#define GIC_SH_SET_DUAL_OFS 0x0200
/* Set/Clear corresponding bit in Edge Detect Register */
#define GIC_SH_WEDGE_OFS 0x0280
/* Mask manipulation */
#define GIC_SH_RMASK_OFS 0x0300
#define GIC_SH_SMASK_OFS 0x0380
/* Global Interrupt Mask Register (RO) - Bit Set == Interrupt enabled */
#define GIC_SH_MASK_OFS 0x0400
/* Pending Global Interrupts (RO) */
#define GIC_SH_PEND_OFS 0x0480
/* Maps Interrupt X to a Pin */
#define GIC_SH_INTR_MAP_TO_PIN_BASE_OFS 0x0500
#define GIC_SH_MAP_TO_PIN(intr) (4 * (intr))
/* Maps Interrupt X to a VPE */
#define GIC_SH_INTR_MAP_TO_VPE_BASE_OFS 0x2000
#define GIC_SH_MAP_TO_VPE_REG_OFF(intr, vpe) \
((32 * (intr)) + (((vpe) / 32) * 4))
#define GIC_SH_MAP_TO_VPE_REG_BIT(vpe) (1 << ((vpe) % 32))
/* Register Map for Local Section */
#define GIC_VPE_CTL_OFS 0x0000
#define GIC_VPE_PEND_OFS 0x0004
#define GIC_VPE_MASK_OFS 0x0008
#define GIC_VPE_RMASK_OFS 0x000c
#define GIC_VPE_SMASK_OFS 0x0010
#define GIC_VPE_WD_MAP_OFS 0x0040
#define GIC_VPE_COMPARE_MAP_OFS 0x0044
#define GIC_VPE_TIMER_MAP_OFS 0x0048
irqchip: mips-gic: Support local interrupts The MIPS GIC supports 7 local interrupts, 2 of which are the GIC local watchdog and count/compare timer. The remainder are CPU interrupts which may optionally be re-routed through the GIC. GIC hardware IRQs 0-6 are now used for local interrupts while hardware IRQs 7+ are used for external (shared) interrupts. Note that the 5 CPU interrupts may not be re-routable through the GIC. In that case mapping will fail and the vectors reported in C0_IntCtl should be used instead. gic_get_c0_compare_int() and gic_get_c0_perfcount_int() will return the correct IRQ number to use for the C0 timer and perfcounter interrupts based on the routability of those interrupts through the GIC. A separate irq_chip, with callbacks that mask/unmask the local interrupt on all CPUs, is used for the C0 timer and performance counter interrupts since all other platforms do not use the percpu IRQ API for those interrupts. Malta, SEAD-3, and the GIC clockevent driver have been updated to use local interrupts and the R4K clockevent driver has been updated to poll for C0 timer interrupts through the GIC when the GIC is present. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7819/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-19 04:47:27 +07:00
#define GIC_VPE_FDC_MAP_OFS 0x004c
#define GIC_VPE_PERFCTR_MAP_OFS 0x0050
#define GIC_VPE_SWINT0_MAP_OFS 0x0054
#define GIC_VPE_SWINT1_MAP_OFS 0x0058
#define GIC_VPE_OTHER_ADDR_OFS 0x0080
#define GIC_VPE_WD_CONFIG0_OFS 0x0090
#define GIC_VPE_WD_COUNT0_OFS 0x0094
#define GIC_VPE_WD_INITIAL0_OFS 0x0098
#define GIC_VPE_COMPARE_LO_OFS 0x00a0
#define GIC_VPE_COMPARE_HI_OFS 0x00a4
#define GIC_VPE_EIC_SHADOW_SET_BASE_OFS 0x0100
#define GIC_VPE_EIC_SS(intr) (4 * (intr))
#define GIC_VPE_EIC_VEC_BASE_OFS 0x0800
#define GIC_VPE_EIC_VEC(intr) (4 * (intr))
#define GIC_VPE_TENABLE_NMI_OFS 0x1000
#define GIC_VPE_TENABLE_YQ_OFS 0x1004
#define GIC_VPE_TENABLE_INT_31_0_OFS 0x1080
#define GIC_VPE_TENABLE_INT_63_32_OFS 0x1084
/* User Mode Visible Section Register Map */
#define GIC_UMV_SH_COUNTER_31_00_OFS 0x0000
#define GIC_UMV_SH_COUNTER_63_32_OFS 0x0004
/* Masks */
#define GIC_SH_CONFIG_COUNTSTOP_SHF 28
#define GIC_SH_CONFIG_COUNTSTOP_MSK (MSK(1) << GIC_SH_CONFIG_COUNTSTOP_SHF)
#define GIC_SH_CONFIG_COUNTBITS_SHF 24
#define GIC_SH_CONFIG_COUNTBITS_MSK (MSK(4) << GIC_SH_CONFIG_COUNTBITS_SHF)
#define GIC_SH_CONFIG_NUMINTRS_SHF 16
#define GIC_SH_CONFIG_NUMINTRS_MSK (MSK(8) << GIC_SH_CONFIG_NUMINTRS_SHF)
#define GIC_SH_CONFIG_NUMVPES_SHF 0
#define GIC_SH_CONFIG_NUMVPES_MSK (MSK(8) << GIC_SH_CONFIG_NUMVPES_SHF)
#define GIC_SH_WEDGE_SET(intr) ((intr) | (0x1 << 31))
#define GIC_SH_WEDGE_CLR(intr) ((intr) & ~(0x1 << 31))
#define GIC_MAP_TO_PIN_SHF 31
#define GIC_MAP_TO_PIN_MSK (MSK(1) << GIC_MAP_TO_PIN_SHF)
#define GIC_MAP_TO_NMI_SHF 30
#define GIC_MAP_TO_NMI_MSK (MSK(1) << GIC_MAP_TO_NMI_SHF)
#define GIC_MAP_TO_YQ_SHF 29
#define GIC_MAP_TO_YQ_MSK (MSK(1) << GIC_MAP_TO_YQ_SHF)
#define GIC_MAP_SHF 0
#define GIC_MAP_MSK (MSK(6) << GIC_MAP_SHF)
/* GIC_VPE_CTL Masks */
irqchip: mips-gic: Support local interrupts The MIPS GIC supports 7 local interrupts, 2 of which are the GIC local watchdog and count/compare timer. The remainder are CPU interrupts which may optionally be re-routed through the GIC. GIC hardware IRQs 0-6 are now used for local interrupts while hardware IRQs 7+ are used for external (shared) interrupts. Note that the 5 CPU interrupts may not be re-routable through the GIC. In that case mapping will fail and the vectors reported in C0_IntCtl should be used instead. gic_get_c0_compare_int() and gic_get_c0_perfcount_int() will return the correct IRQ number to use for the C0 timer and perfcounter interrupts based on the routability of those interrupts through the GIC. A separate irq_chip, with callbacks that mask/unmask the local interrupt on all CPUs, is used for the C0 timer and performance counter interrupts since all other platforms do not use the percpu IRQ API for those interrupts. Malta, SEAD-3, and the GIC clockevent driver have been updated to use local interrupts and the R4K clockevent driver has been updated to poll for C0 timer interrupts through the GIC when the GIC is present. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7819/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-19 04:47:27 +07:00
#define GIC_VPE_CTL_FDC_RTBL_SHF 4
#define GIC_VPE_CTL_FDC_RTBL_MSK (MSK(1) << GIC_VPE_CTL_FDC_RTBL_SHF)
#define GIC_VPE_CTL_SWINT_RTBL_SHF 3
#define GIC_VPE_CTL_SWINT_RTBL_MSK (MSK(1) << GIC_VPE_CTL_SWINT_RTBL_SHF)
#define GIC_VPE_CTL_PERFCNT_RTBL_SHF 2
#define GIC_VPE_CTL_PERFCNT_RTBL_MSK (MSK(1) << GIC_VPE_CTL_PERFCNT_RTBL_SHF)
#define GIC_VPE_CTL_TIMER_RTBL_SHF 1
#define GIC_VPE_CTL_TIMER_RTBL_MSK (MSK(1) << GIC_VPE_CTL_TIMER_RTBL_SHF)
#define GIC_VPE_CTL_EIC_MODE_SHF 0
#define GIC_VPE_CTL_EIC_MODE_MSK (MSK(1) << GIC_VPE_CTL_EIC_MODE_SHF)
/* GIC_VPE_PEND Masks */
#define GIC_VPE_PEND_WD_SHF 0
#define GIC_VPE_PEND_WD_MSK (MSK(1) << GIC_VPE_PEND_WD_SHF)
#define GIC_VPE_PEND_CMP_SHF 1
#define GIC_VPE_PEND_CMP_MSK (MSK(1) << GIC_VPE_PEND_CMP_SHF)
#define GIC_VPE_PEND_TIMER_SHF 2
#define GIC_VPE_PEND_TIMER_MSK (MSK(1) << GIC_VPE_PEND_TIMER_SHF)
#define GIC_VPE_PEND_PERFCOUNT_SHF 3
#define GIC_VPE_PEND_PERFCOUNT_MSK (MSK(1) << GIC_VPE_PEND_PERFCOUNT_SHF)
#define GIC_VPE_PEND_SWINT0_SHF 4
#define GIC_VPE_PEND_SWINT0_MSK (MSK(1) << GIC_VPE_PEND_SWINT0_SHF)
#define GIC_VPE_PEND_SWINT1_SHF 5
#define GIC_VPE_PEND_SWINT1_MSK (MSK(1) << GIC_VPE_PEND_SWINT1_SHF)
/* GIC_VPE_RMASK Masks */
#define GIC_VPE_RMASK_WD_SHF 0
#define GIC_VPE_RMASK_WD_MSK (MSK(1) << GIC_VPE_RMASK_WD_SHF)
#define GIC_VPE_RMASK_CMP_SHF 1
#define GIC_VPE_RMASK_CMP_MSK (MSK(1) << GIC_VPE_RMASK_CMP_SHF)
#define GIC_VPE_RMASK_TIMER_SHF 2
#define GIC_VPE_RMASK_TIMER_MSK (MSK(1) << GIC_VPE_RMASK_TIMER_SHF)
#define GIC_VPE_RMASK_PERFCNT_SHF 3
#define GIC_VPE_RMASK_PERFCNT_MSK (MSK(1) << GIC_VPE_RMASK_PERFCNT_SHF)
#define GIC_VPE_RMASK_SWINT0_SHF 4
#define GIC_VPE_RMASK_SWINT0_MSK (MSK(1) << GIC_VPE_RMASK_SWINT0_SHF)
#define GIC_VPE_RMASK_SWINT1_SHF 5
#define GIC_VPE_RMASK_SWINT1_MSK (MSK(1) << GIC_VPE_RMASK_SWINT1_SHF)
/* GIC_VPE_SMASK Masks */
#define GIC_VPE_SMASK_WD_SHF 0
#define GIC_VPE_SMASK_WD_MSK (MSK(1) << GIC_VPE_SMASK_WD_SHF)
#define GIC_VPE_SMASK_CMP_SHF 1
#define GIC_VPE_SMASK_CMP_MSK (MSK(1) << GIC_VPE_SMASK_CMP_SHF)
#define GIC_VPE_SMASK_TIMER_SHF 2
#define GIC_VPE_SMASK_TIMER_MSK (MSK(1) << GIC_VPE_SMASK_TIMER_SHF)
#define GIC_VPE_SMASK_PERFCNT_SHF 3
#define GIC_VPE_SMASK_PERFCNT_MSK (MSK(1) << GIC_VPE_SMASK_PERFCNT_SHF)
#define GIC_VPE_SMASK_SWINT0_SHF 4
#define GIC_VPE_SMASK_SWINT0_MSK (MSK(1) << GIC_VPE_SMASK_SWINT0_SHF)
#define GIC_VPE_SMASK_SWINT1_SHF 5
#define GIC_VPE_SMASK_SWINT1_MSK (MSK(1) << GIC_VPE_SMASK_SWINT1_SHF)
/* GIC nomenclature for Core Interrupt Pins. */
#define GIC_CPU_INT0 0 /* Core Interrupt 2 */
#define GIC_CPU_INT1 1 /* . */
#define GIC_CPU_INT2 2 /* . */
#define GIC_CPU_INT3 3 /* . */
#define GIC_CPU_INT4 4 /* . */
#define GIC_CPU_INT5 5 /* Core Interrupt 7 */
/* Add 2 to convert GIC CPU pin to core interrupt */
#define GIC_CPU_PIN_OFFSET 2
/* Add 2 to convert non-EIC hardware interrupt to EIC vector number. */
#define GIC_CPU_TO_VEC_OFFSET 2
/* Mapped interrupt to pin X, then GIC will generate the vector (X+1). */
#define GIC_PIN_TO_VEC_OFFSET 1
irqchip: mips-gic: Support local interrupts The MIPS GIC supports 7 local interrupts, 2 of which are the GIC local watchdog and count/compare timer. The remainder are CPU interrupts which may optionally be re-routed through the GIC. GIC hardware IRQs 0-6 are now used for local interrupts while hardware IRQs 7+ are used for external (shared) interrupts. Note that the 5 CPU interrupts may not be re-routable through the GIC. In that case mapping will fail and the vectors reported in C0_IntCtl should be used instead. gic_get_c0_compare_int() and gic_get_c0_perfcount_int() will return the correct IRQ number to use for the C0 timer and perfcounter interrupts based on the routability of those interrupts through the GIC. A separate irq_chip, with callbacks that mask/unmask the local interrupt on all CPUs, is used for the C0 timer and performance counter interrupts since all other platforms do not use the percpu IRQ API for those interrupts. Malta, SEAD-3, and the GIC clockevent driver have been updated to use local interrupts and the R4K clockevent driver has been updated to poll for C0 timer interrupts through the GIC when the GIC is present. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7819/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-19 04:47:27 +07:00
/* Local GIC interrupts. */
#define GIC_LOCAL_INT_WD 0 /* GIC watchdog */
#define GIC_LOCAL_INT_COMPARE 1 /* GIC count and compare timer */
#define GIC_LOCAL_INT_TIMER 2 /* CPU timer interrupt */
#define GIC_LOCAL_INT_PERFCTR 3 /* CPU performance counter */
#define GIC_LOCAL_INT_SWINT0 4 /* CPU software interrupt 0 */
#define GIC_LOCAL_INT_SWINT1 5 /* CPU software interrupt 1 */
#define GIC_LOCAL_INT_FDC 6 /* CPU fast debug channel */
#define GIC_NUM_LOCAL_INTRS 7
/* Convert between local/shared IRQ number and GIC HW IRQ number. */
#define GIC_LOCAL_HWIRQ_BASE 0
#define GIC_LOCAL_TO_HWIRQ(x) (GIC_LOCAL_HWIRQ_BASE + (x))
#define GIC_HWIRQ_TO_LOCAL(x) ((x) - GIC_LOCAL_HWIRQ_BASE)
#define GIC_SHARED_HWIRQ_BASE GIC_NUM_LOCAL_INTRS
#define GIC_SHARED_TO_HWIRQ(x) (GIC_SHARED_HWIRQ_BASE + (x))
#define GIC_HWIRQ_TO_SHARED(x) ((x) - GIC_SHARED_HWIRQ_BASE)
extern unsigned int gic_present;
extern void gic_init(unsigned long gic_base_addr,
unsigned long gic_addrspace_size, unsigned int cpu_vec,
unsigned int irqbase);
extern void gic_clocksource_init(unsigned int);
extern cycle_t gic_read_count(void);
extern unsigned int gic_get_count_width(void);
extern cycle_t gic_read_compare(void);
extern void gic_write_compare(cycle_t cnt);
extern void gic_write_cpu_compare(cycle_t cnt, int cpu);
extern void gic_send_ipi(unsigned int intr);
extern unsigned int plat_ipi_call_int_xlate(unsigned int);
extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
extern unsigned int gic_get_timer_pending(void);
irqchip: mips-gic: Support local interrupts The MIPS GIC supports 7 local interrupts, 2 of which are the GIC local watchdog and count/compare timer. The remainder are CPU interrupts which may optionally be re-routed through the GIC. GIC hardware IRQs 0-6 are now used for local interrupts while hardware IRQs 7+ are used for external (shared) interrupts. Note that the 5 CPU interrupts may not be re-routable through the GIC. In that case mapping will fail and the vectors reported in C0_IntCtl should be used instead. gic_get_c0_compare_int() and gic_get_c0_perfcount_int() will return the correct IRQ number to use for the C0 timer and perfcounter interrupts based on the routability of those interrupts through the GIC. A separate irq_chip, with callbacks that mask/unmask the local interrupt on all CPUs, is used for the C0 timer and performance counter interrupts since all other platforms do not use the percpu IRQ API for those interrupts. Malta, SEAD-3, and the GIC clockevent driver have been updated to use local interrupts and the R4K clockevent driver has been updated to poll for C0 timer interrupts through the GIC when the GIC is present. Signed-off-by: Andrew Bresticker <abrestic@chromium.org> Acked-by: Jason Cooper <jason@lakedaemon.net> Reviewed-by: Qais Yousef <qais.yousef@imgtec.com> Tested-by: Qais Yousef <qais.yousef@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeffrey Deans <jeffrey.deans@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: John Crispin <blogic@openwrt.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/7819/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-09-19 04:47:27 +07:00
extern int gic_get_c0_compare_int(void);
extern int gic_get_c0_perfcount_int(void);
#endif /* __LINUX_IRQCHIP_MIPS_GIC_H */