linux_dsm_epyc7002/drivers/media/video/cx18/cx18-av-firmware.c

/*
 *  cx18 ADEC firmware functions
 *
 *  Copyright (C) 2007  Hans Verkuil <hverkuil@xs4all.nl>
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version 2
 *  of the License, or (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
 *  02110-1301, USA.
 */

#include "cx18-driver.h"
#include <linux/firmware.h>

#define FWFILE "v4l-cx23418-dig.fw"

int cx18_av_loadfw(struct cx18 *cx)
{
	const struct firmware *fw = NULL;
	u32 size;
	u32 v;
	const u8 *ptr;
	int i;

	if (request_firmware(&fw, FWFILE, &cx->dev->dev) != 0) {
		CX18_ERR("unable to open firmware %s\n", FWFILE);
		return -EINVAL;
	}

	cx18_av_write4(cx, CXADEC_CHIP_CTRL, 0x00010000);
	cx18_av_write(cx, CXADEC_STD_DET_CTL, 0xf6); /* Byte 0 */

	/* Reset the Mako core (Register is undocumented.) */
	cx18_av_write4(cx, 0x8100, 0x00010000);

	/* Put the 8051 in reset and enable firmware upload */
	cx18_av_write4(cx, CXADEC_DL_CTL, 0x0F000000);

	ptr = fw->data;
	size = fw->size;

	for (i = 0; i < size; i++) {
		u32 dl_control = 0x0F000000 | ((u32)ptr[i] << 16);
		u32 value = 0;
		int retries;

		for (retries = 0; retries < 5; retries++) {
			cx18_av_write4(cx, CXADEC_DL_CTL, dl_control);
			value = cx18_av_read4(cx, CXADEC_DL_CTL);
			if ((value & 0x3F00) == (dl_control & 0x3F00))
				break;
		}
		if (retries >= 5) {
			CX18_ERR("unable to load firmware %s\n", FWFILE);
			release_firmware(fw);
			return -EIO;
		}
	}

	cx18_av_write4(cx, CXADEC_DL_CTL, 0x13000000 | fw->size);

	/* Output to the 416 */
	cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000);

	/* Audio input control 1 set to Sony mode */
	/* Audio output input 2 is 0 for slave operation input */
	/* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
	/* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
	   after WS transition for first bit of audio word. */
	cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0);

	/* Audio output control 1 is set to Sony mode */
	/* Audio output control 2 is set to 1 for master mode */
	/* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
	/* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
	   after WS transition for first bit of audio word. */
	/* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT
	   are generated) */
	cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0);

	/* set alt I2s master clock to /16 and enable alt divider i2s
	   passthrough */
	cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5000B687);

	cx18_av_write4(cx, CXADEC_STD_DET_CTL, 0x000000F6);
	/* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */

	/* Set bit 0 in register 0x9CC to signify that this is MiniMe. */
	/* Register 0x09CC is defined by the Merlin firmware, and doesn't
	   have a name in the spec. */
	cx18_av_write4(cx, 0x09CC, 1);

#define CX18_AUDIO_ENABLE            	0xc72014
	v = read_reg(CX18_AUDIO_ENABLE);
	/* If bit 11 is 1 */
	if (v & 0x800)
		write_reg(v & 0xFFFFFBFF, CX18_AUDIO_ENABLE); /* Clear bit 10 */

	/* Enable WW auto audio standard detection */
	v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
	v |= 0xFF;   /* Auto by default */
	v |= 0x400;  /* Stereo by default */
	v |= 0x14000000;
	cx18_av_write4(cx, CXADEC_STD_DET_CTL, v);

	release_firmware(fw);

	CX18_INFO("loaded %s firmware (%d bytes)\n", FWFILE, size);
	return 0;
}