linux_dsm_epyc7002/drivers/gpu/drm/nouveau/nouveau_fbcon.c

548 lines
14 KiB
C
Raw Normal View History

/*
* Copyright © 2007 David Airlie
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*
* Authors:
* David Airlie
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/sysrq.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <linux/screen_info.h>
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 12:38:10 +07:00
#include <linux/vga_switcheroo.h>
#include <linux/console.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_fb_helper.h>
#include "nouveau_drm.h"
#include "nouveau_gem.h"
#include "nouveau_bo.h"
#include "nouveau_fbcon.h"
#include "nouveau_chan.h"
#include "nouveau_crtc.h"
#include <core/client.h>
#include <core/device.h>
#include <subdev/fb.h>
MODULE_PARM_DESC(nofbaccel, "Disable fbcon acceleration");
static int nouveau_nofbaccel = 0;
module_param_named(nofbaccel, nouveau_nofbaccel, int, 0400);
static void
nouveau_fbcon_fillrect(struct fb_info *info, const struct fb_fillrect *rect)
{
struct nouveau_fbdev *fbcon = info->par;
struct nouveau_drm *drm = nouveau_drm(fbcon->dev);
struct nouveau_device *device = nv_device(drm->device);
int ret;
if (info->state != FBINFO_STATE_RUNNING)
return;
ret = -ENODEV;
if (!in_interrupt() && !(info->flags & FBINFO_HWACCEL_DISABLED) &&
mutex_trylock(&drm->client.mutex)) {
if (device->card_type < NV_50)
ret = nv04_fbcon_fillrect(info, rect);
else
if (device->card_type < NV_C0)
ret = nv50_fbcon_fillrect(info, rect);
else
ret = nvc0_fbcon_fillrect(info, rect);
mutex_unlock(&drm->client.mutex);
}
if (ret == 0)
return;
if (ret != -ENODEV)
nouveau_fbcon_gpu_lockup(info);
cfb_fillrect(info, rect);
}
static void
nouveau_fbcon_copyarea(struct fb_info *info, const struct fb_copyarea *image)
{
struct nouveau_fbdev *fbcon = info->par;
struct nouveau_drm *drm = nouveau_drm(fbcon->dev);
struct nouveau_device *device = nv_device(drm->device);
int ret;
if (info->state != FBINFO_STATE_RUNNING)
return;
ret = -ENODEV;
if (!in_interrupt() && !(info->flags & FBINFO_HWACCEL_DISABLED) &&
mutex_trylock(&drm->client.mutex)) {
if (device->card_type < NV_50)
ret = nv04_fbcon_copyarea(info, image);
else
if (device->card_type < NV_C0)
ret = nv50_fbcon_copyarea(info, image);
else
ret = nvc0_fbcon_copyarea(info, image);
mutex_unlock(&drm->client.mutex);
}
if (ret == 0)
return;
if (ret != -ENODEV)
nouveau_fbcon_gpu_lockup(info);
cfb_copyarea(info, image);
}
static void
nouveau_fbcon_imageblit(struct fb_info *info, const struct fb_image *image)
{
struct nouveau_fbdev *fbcon = info->par;
struct nouveau_drm *drm = nouveau_drm(fbcon->dev);
struct nouveau_device *device = nv_device(drm->device);
int ret;
if (info->state != FBINFO_STATE_RUNNING)
return;
ret = -ENODEV;
if (!in_interrupt() && !(info->flags & FBINFO_HWACCEL_DISABLED) &&
mutex_trylock(&drm->client.mutex)) {
if (device->card_type < NV_50)
ret = nv04_fbcon_imageblit(info, image);
else
if (device->card_type < NV_C0)
ret = nv50_fbcon_imageblit(info, image);
else
ret = nvc0_fbcon_imageblit(info, image);
mutex_unlock(&drm->client.mutex);
}
if (ret == 0)
return;
if (ret != -ENODEV)
nouveau_fbcon_gpu_lockup(info);
cfb_imageblit(info, image);
}
static int
nouveau_fbcon_sync(struct fb_info *info)
{
struct nouveau_fbdev *fbcon = info->par;
struct nouveau_drm *drm = nouveau_drm(fbcon->dev);
struct nouveau_channel *chan = drm->channel;
int ret;
if (!chan || !chan->accel_done || in_interrupt() ||
info->state != FBINFO_STATE_RUNNING ||
info->flags & FBINFO_HWACCEL_DISABLED)
return 0;
if (!mutex_trylock(&drm->client.mutex))
return 0;
ret = nouveau_channel_idle(chan);
mutex_unlock(&drm->client.mutex);
if (ret) {
nouveau_fbcon_gpu_lockup(info);
return 0;
}
chan->accel_done = false;
return 0;
}
static struct fb_ops nouveau_fbcon_ops = {
.owner = THIS_MODULE,
.fb_check_var = drm_fb_helper_check_var,
.fb_set_par = drm_fb_helper_set_par,
.fb_fillrect = nouveau_fbcon_fillrect,
.fb_copyarea = nouveau_fbcon_copyarea,
.fb_imageblit = nouveau_fbcon_imageblit,
.fb_sync = nouveau_fbcon_sync,
.fb_pan_display = drm_fb_helper_pan_display,
.fb_blank = drm_fb_helper_blank,
.fb_setcmap = drm_fb_helper_setcmap,
.fb_debug_enter = drm_fb_helper_debug_enter,
.fb_debug_leave = drm_fb_helper_debug_leave,
};
static struct fb_ops nouveau_fbcon_sw_ops = {
.owner = THIS_MODULE,
.fb_check_var = drm_fb_helper_check_var,
.fb_set_par = drm_fb_helper_set_par,
.fb_fillrect = cfb_fillrect,
.fb_copyarea = cfb_copyarea,
.fb_imageblit = cfb_imageblit,
.fb_pan_display = drm_fb_helper_pan_display,
.fb_blank = drm_fb_helper_blank,
.fb_setcmap = drm_fb_helper_setcmap,
.fb_debug_enter = drm_fb_helper_debug_enter,
.fb_debug_leave = drm_fb_helper_debug_leave,
};
static void nouveau_fbcon_gamma_set(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, int regno)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
nv_crtc->lut.r[regno] = red;
nv_crtc->lut.g[regno] = green;
nv_crtc->lut.b[regno] = blue;
}
static void nouveau_fbcon_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
u16 *blue, int regno)
{
struct nouveau_crtc *nv_crtc = nouveau_crtc(crtc);
*red = nv_crtc->lut.r[regno];
*green = nv_crtc->lut.g[regno];
*blue = nv_crtc->lut.b[regno];
}
static void
nouveau_fbcon_zfill(struct drm_device *dev, struct nouveau_fbdev *fbcon)
{
struct fb_info *info = fbcon->helper.fbdev;
struct fb_fillrect rect;
/* Clear the entire fbcon. The drm will program every connector
* with it's preferred mode. If the sizes differ, one display will
* quite likely have garbage around the console.
*/
rect.dx = rect.dy = 0;
rect.width = info->var.xres_virtual;
rect.height = info->var.yres_virtual;
rect.color = 0;
rect.rop = ROP_COPY;
info->fbops->fb_fillrect(info, &rect);
}
static int
nouveau_fbcon_create(struct drm_fb_helper *helper,
struct drm_fb_helper_surface_size *sizes)
{
struct nouveau_fbdev *fbcon = (struct nouveau_fbdev *)helper;
struct drm_device *dev = fbcon->dev;
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_device *device = nv_device(drm->device);
struct fb_info *info;
struct drm_framebuffer *fb;
struct nouveau_framebuffer *nouveau_fb;
struct nouveau_channel *chan;
struct nouveau_bo *nvbo;
struct drm_mode_fb_cmd2 mode_cmd;
struct pci_dev *pdev = dev->pdev;
int size, ret;
mode_cmd.width = sizes->surface_width;
mode_cmd.height = sizes->surface_height;
mode_cmd.pitches[0] = mode_cmd.width * (sizes->surface_bpp >> 3);
mode_cmd.pitches[0] = roundup(mode_cmd.pitches[0], 256);
mode_cmd.pixel_format = drm_mode_legacy_fb_format(sizes->surface_bpp,
sizes->surface_depth);
size = mode_cmd.pitches[0] * mode_cmd.height;
size = roundup(size, PAGE_SIZE);
ret = nouveau_gem_new(dev, size, 0, NOUVEAU_GEM_DOMAIN_VRAM,
0, 0x0000, &nvbo);
if (ret) {
NV_ERROR(drm, "failed to allocate framebuffer\n");
goto out;
}
ret = nouveau_bo_pin(nvbo, TTM_PL_FLAG_VRAM);
if (ret) {
NV_ERROR(drm, "failed to pin fb: %d\n", ret);
goto out_unref;
}
ret = nouveau_bo_map(nvbo);
if (ret) {
NV_ERROR(drm, "failed to map fb: %d\n", ret);
goto out_unpin;
}
chan = nouveau_nofbaccel ? NULL : drm->channel;
if (chan && device->card_type >= NV_50) {
ret = nouveau_bo_vma_add(nvbo, nv_client(chan->cli)->vm,
&fbcon->nouveau_fb.vma);
if (ret) {
NV_ERROR(drm, "failed to map fb into chan: %d\n", ret);
chan = NULL;
}
}
mutex_lock(&dev->struct_mutex);
info = framebuffer_alloc(0, &pdev->dev);
if (!info) {
ret = -ENOMEM;
goto out_unlock;
}
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret) {
ret = -ENOMEM;
framebuffer_release(info);
goto out_unlock;
}
info->par = fbcon;
nouveau_framebuffer_init(dev, &fbcon->nouveau_fb, &mode_cmd, nvbo);
nouveau_fb = &fbcon->nouveau_fb;
fb = &nouveau_fb->base;
/* setup helper */
fbcon->helper.fb = fb;
fbcon->helper.fbdev = info;
strcpy(info->fix.id, "nouveaufb");
if (!chan)
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_DISABLED;
else
info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_COPYAREA |
FBINFO_HWACCEL_FILLRECT |
FBINFO_HWACCEL_IMAGEBLIT;
info->flags |= FBINFO_CAN_FORCE_OUTPUT;
info->fbops = &nouveau_fbcon_sw_ops;
info->fix.smem_start = nvbo->bo.mem.bus.base +
nvbo->bo.mem.bus.offset;
info->fix.smem_len = size;
info->screen_base = nvbo_kmap_obj_iovirtual(nouveau_fb->nvbo);
info->screen_size = size;
drm_fb_helper_fill_fix(info, fb->pitches[0], fb->depth);
drm_fb_helper_fill_var(info, &fbcon->helper, sizes->fb_width, sizes->fb_height);
/* Use default scratch pixmap (info->pixmap.flags = FB_PIXMAP_SYSTEM) */
mutex_unlock(&dev->struct_mutex);
if (chan) {
ret = -ENODEV;
if (device->card_type < NV_50)
ret = nv04_fbcon_accel_init(info);
else
if (device->card_type < NV_C0)
ret = nv50_fbcon_accel_init(info);
else
ret = nvc0_fbcon_accel_init(info);
if (ret == 0)
info->fbops = &nouveau_fbcon_ops;
}
nouveau_fbcon_zfill(dev, fbcon);
/* To allow resizeing without swapping buffers */
NV_INFO(drm, "allocated %dx%d fb: 0x%lx, bo %p\n",
nouveau_fb->base.width, nouveau_fb->base.height,
nvbo->bo.offset, nvbo);
vga_switcheroo: initial implementation (v15) Many new laptops now come with 2 gpus, one to be used for low power modes and one for gaming/on-ac applications. These GPUs are typically wired to the laptop panel and VGA ports via a multiplexer unit which is controlled via ACPI methods. 4 combinations of systems typically exist - with 2 ACPI methods. Intel/ATI - Lenovo W500/T500 - use ATPX ACPI method ATI/ATI - some ASUS - use ATPX ACPI Method Intel/Nvidia - - use _DSM ACPI method Nvidia/Nvidia - - use _DSM ACPI method. TODO: This patch adds support for the ATPX method and initial bits for the _DSM methods that need to written by someone with access to the hardware. Add a proper non-debugfs interface - need to get some proper testing first. v2: add power up/down support for both devices on W500 puts i915/radeon into D3 and cuts power to radeon. v3: redo probing methods, no DMI list, drm devices call to register with switcheroo, it tries to find an ATPX method on any device and once there is two devices + ATPX it inits the switcher. v4: ATPX msg handling using buffers - should work on more machines v5: rearchitect after more mjg59 discussion - move ATPX handling to radeon driver. v6: add file headers + initial nouveau bits (to be filled out). v7: merge delayed switcher code. v8: avoid suspend/resume of gpu that is off v9: rearchitect - mjg59 is always right. - move all ATPX code to radeon, should allow simpler DSM also proper ATRM handling v10: add ATRM support for radeon BIOS, add mutex to lock vgasr_priv v11: fix bug in resuming Intel for 2nd time. v12: start fixing up nvidia code blindly. v13: blindly guess at finishing nvidia code v14: remove radeon audio hacks - fix up intel resume more like upstream v15: clean up printks + remove unnecessary igd/dis pointers mount debugfs /sys/kernel/debug/vgaswitcheroo/switch - should exist if ATPX detected + 2 cards. DIS - immediate change to discrete IGD - immediate change to IGD DDIS - delayed change to discrete DIGD - delayed change to IGD ON - turn on not in use OFF - turn off not in use Tested on W500 (Intel/ATI) and T500 (Intel/ATI) Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-02-01 12:38:10 +07:00
vga_switcheroo_client_fb_set(dev->pdev, info);
return 0;
out_unlock:
mutex_unlock(&dev->struct_mutex);
if (chan)
nouveau_bo_vma_del(nvbo, &fbcon->nouveau_fb.vma);
nouveau_bo_unmap(nvbo);
out_unpin:
nouveau_bo_unpin(nvbo);
out_unref:
nouveau_bo_ref(NULL, &nvbo);
out:
return ret;
}
void
nouveau_fbcon_output_poll_changed(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->fbcon)
drm_fb_helper_hotplug_event(&drm->fbcon->helper);
}
static int
nouveau_fbcon_destroy(struct drm_device *dev, struct nouveau_fbdev *fbcon)
{
struct nouveau_framebuffer *nouveau_fb = &fbcon->nouveau_fb;
struct fb_info *info;
if (fbcon->helper.fbdev) {
info = fbcon->helper.fbdev;
unregister_framebuffer(info);
if (info->cmap.len)
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
}
if (nouveau_fb->nvbo) {
nouveau_bo_unmap(nouveau_fb->nvbo);
nouveau_bo_vma_del(nouveau_fb->nvbo, &nouveau_fb->vma);
nouveau_bo_unpin(nouveau_fb->nvbo);
drm_gem_object_unreference_unlocked(&nouveau_fb->nvbo->gem);
nouveau_fb->nvbo = NULL;
}
drm_fb_helper_fini(&fbcon->helper);
drm: revamp framebuffer cleanup interfaces We have two classes of framebuffer - Created by the driver (atm only for fbdev), and the driver holds onto the last reference count until destruction. - Created by userspace and associated with a given fd. These framebuffers will be reaped when their assoiciated fb is closed. Now these two cases are set up differently, the framebuffers are on different lists and hence destruction needs to clean up different things. Also, for userspace framebuffers we remove them from any current usage, whereas for internal framebuffers it is assumed that the driver has done this already. Long story short, we need two different ways to cleanup such drivers. Three functions are involved in total: - drm_framebuffer_remove: Convenience function which removes the fb from all active usage and then drops the passed-in reference. - drm_framebuffer_unregister_private: Will remove driver-private framebuffers from relevant lists and drop the corresponding references. Should be called for driver-private framebuffers before dropping the last reference (or like for a lot of the drivers where the fbdev is embedded someplace else, before doing the cleanup manually). - drm_framebuffer_cleanup: Final cleanup for both classes of fbs, should be called by the driver's ->destroy callback once the last reference is gone. This patch just rolls out the new interfaces and updates all drivers (by adding calls to drm_framebuffer_unregister_private at all the right places)- no functional changes yet. Follow-on patches will move drm core code around and update the lifetime management for framebuffers, so that we are no longer required to keep framebuffers alive by locking mode_config.mutex. I've also updated the kerneldoc already. vmwgfx seems to again be a bit special, at least I haven't figured out how the fbdev support in that driver works. It smells like it's external though. v2: The i915 driver creates another private framebuffer in the load-detect code. Adjust its cleanup code, too. Reviewed-by: Rob Clark <rob@ti.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-12-11 02:42:17 +07:00
drm_framebuffer_unregister_private(&nouveau_fb->base);
drm_framebuffer_cleanup(&nouveau_fb->base);
return 0;
}
void nouveau_fbcon_gpu_lockup(struct fb_info *info)
{
struct nouveau_fbdev *fbcon = info->par;
struct nouveau_drm *drm = nouveau_drm(fbcon->dev);
NV_ERROR(drm, "GPU lockup - switching to software fbcon\n");
info->flags |= FBINFO_HWACCEL_DISABLED;
}
static struct drm_fb_helper_funcs nouveau_fbcon_helper_funcs = {
.gamma_set = nouveau_fbcon_gamma_set,
.gamma_get = nouveau_fbcon_gamma_get,
.fb_probe = nouveau_fbcon_create,
};
int
nouveau_fbcon_init(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
struct nouveau_fb *pfb = nouveau_fb(drm->device);
struct nouveau_fbdev *fbcon;
int preferred_bpp;
int ret;
if (!dev->mode_config.num_crtc ||
(dev->pdev->class >> 8) != PCI_CLASS_DISPLAY_VGA)
return 0;
fbcon = kzalloc(sizeof(struct nouveau_fbdev), GFP_KERNEL);
if (!fbcon)
return -ENOMEM;
fbcon->dev = dev;
drm->fbcon = fbcon;
fbcon->helper.funcs = &nouveau_fbcon_helper_funcs;
ret = drm_fb_helper_init(dev, &fbcon->helper,
dev->mode_config.num_crtc, 4);
if (ret) {
kfree(fbcon);
return ret;
}
drm_fb_helper_single_add_all_connectors(&fbcon->helper);
if (pfb->ram->size <= 32 * 1024 * 1024)
preferred_bpp = 8;
else
if (pfb->ram->size <= 64 * 1024 * 1024)
preferred_bpp = 16;
else
preferred_bpp = 32;
/* disable all the possible outputs/crtcs before entering KMS mode */
drm_helper_disable_unused_functions(dev);
drm_fb_helper_initial_config(&fbcon->helper, preferred_bpp);
return 0;
}
void
nouveau_fbcon_fini(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (!drm->fbcon)
return;
nouveau_fbcon_destroy(dev, drm->fbcon);
kfree(drm->fbcon);
drm->fbcon = NULL;
}
void
nouveau_fbcon_save_disable_accel(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->fbcon) {
drm->fbcon->saved_flags = drm->fbcon->helper.fbdev->flags;
drm->fbcon->helper.fbdev->flags |= FBINFO_HWACCEL_DISABLED;
}
}
void
nouveau_fbcon_restore_accel(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->fbcon) {
drm->fbcon->helper.fbdev->flags = drm->fbcon->saved_flags;
}
}
void
nouveau_fbcon_set_suspend(struct drm_device *dev, int state)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->fbcon) {
console_lock();
if (state == 0)
nouveau_fbcon_save_disable_accel(dev);
fb_set_suspend(drm->fbcon->helper.fbdev, state);
if (state == 1)
nouveau_fbcon_restore_accel(dev);
console_unlock();
}
}
void
nouveau_fbcon_zfill_all(struct drm_device *dev)
{
struct nouveau_drm *drm = nouveau_drm(dev);
if (drm->fbcon) {
nouveau_fbcon_zfill(dev, drm->fbcon);
}
}