linux_dsm_epyc7002/include/linux/ptp_clock_kernel.h

271 lines
8.8 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* PTP 1588 clock support
*
* Copyright (C) 2010 OMICRON electronics GmbH
*/
#ifndef _PTP_CLOCK_KERNEL_H_
#define _PTP_CLOCK_KERNEL_H_
#include <linux/device.h>
#include <linux/pps_kernel.h>
#include <linux/ptp_clock.h>
struct ptp_clock_request {
enum {
PTP_CLK_REQ_EXTTS,
PTP_CLK_REQ_PEROUT,
PTP_CLK_REQ_PPS,
} type;
union {
struct ptp_extts_request extts;
struct ptp_perout_request perout;
};
};
ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping Currently, network /system cross-timestamping is performed in the PTP_SYS_OFFSET ioctl. The PTP clock driver reads gettimeofday() and the gettime64() callback provided by the driver. The cross-timestamp is best effort where the latency between the capture of system time (getnstimeofday()) and the device time (driver callback) may be significant. The getcrosststamp() callback and corresponding PTP_SYS_OFFSET_PRECISE ioctl allows the driver to perform this device/system correlation when for example cross timestamp hardware is available. Modern Intel systems can do this for onboard Ethernet controllers using the ART counter. There is virtually zero latency between captures of the ART and network device clock. The capabilities ioctl (PTP_CLOCK_GETCAPS), is augmented allowing applications to query whether or not drivers implement the getcrosststamp callback, providing more precise cross timestamping. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Commit subject tweaks] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 18:15:25 +07:00
struct system_device_crosststamp;
/**
* struct ptp_system_timestamp - system time corresponding to a PHC timestamp
*/
struct ptp_system_timestamp {
struct timespec64 pre_ts;
struct timespec64 post_ts;
};
/**
* struct ptp_clock_info - decribes a PTP hardware clock
*
* @owner: The clock driver should set to THIS_MODULE.
* @name: A short "friendly name" to identify the clock and to
* help distinguish PHY based devices from MAC based ones.
* The string is not meant to be a unique id.
* @max_adj: The maximum possible frequency adjustment, in parts per billon.
* @n_alarm: The number of programmable alarms.
* @n_ext_ts: The number of external time stamp channels.
* @n_per_out: The number of programmable periodic signals.
* @n_pins: The number of programmable pins.
* @pps: Indicates whether the clock supports a PPS callback.
* @pin_config: Array of length 'n_pins'. If the number of
* programmable pins is nonzero, then drivers must
* allocate and initialize this array.
*
* clock operations
*
* @adjfine: Adjusts the frequency of the hardware clock.
* parameter scaled_ppm: Desired frequency offset from
* nominal frequency in parts per million, but with a
* 16 bit binary fractional field.
*
* @adjfreq: Adjusts the frequency of the hardware clock.
* This method is deprecated. New drivers should implement
* the @adjfine method instead.
* parameter delta: Desired frequency offset from nominal frequency
* in parts per billion
*
* @adjtime: Shifts the time of the hardware clock.
* parameter delta: Desired change in nanoseconds.
*
* @gettime64: Reads the current time from the hardware clock.
* This method is deprecated. New drivers should implement
* the @gettimex64 method instead.
* parameter ts: Holds the result.
*
* @gettimex64: Reads the current time from the hardware clock and optionally
* also the system clock.
* parameter ts: Holds the PHC timestamp.
* parameter sts: If not NULL, it holds a pair of timestamps from
* the system clock. The first reading is made right before
* reading the lowest bits of the PHC timestamp and the second
* reading immediately follows that.
*
ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping Currently, network /system cross-timestamping is performed in the PTP_SYS_OFFSET ioctl. The PTP clock driver reads gettimeofday() and the gettime64() callback provided by the driver. The cross-timestamp is best effort where the latency between the capture of system time (getnstimeofday()) and the device time (driver callback) may be significant. The getcrosststamp() callback and corresponding PTP_SYS_OFFSET_PRECISE ioctl allows the driver to perform this device/system correlation when for example cross timestamp hardware is available. Modern Intel systems can do this for onboard Ethernet controllers using the ART counter. There is virtually zero latency between captures of the ART and network device clock. The capabilities ioctl (PTP_CLOCK_GETCAPS), is augmented allowing applications to query whether or not drivers implement the getcrosststamp callback, providing more precise cross timestamping. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Commit subject tweaks] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 18:15:25 +07:00
* @getcrosststamp: Reads the current time from the hardware clock and
* system clock simultaneously.
* parameter cts: Contains timestamp (device,system) pair,
* where system time is realtime and monotonic.
*
* @settime64: Set the current time on the hardware clock.
* parameter ts: Time value to set.
*
* @enable: Request driver to enable or disable an ancillary feature.
* parameter request: Desired resource to enable or disable.
* parameter on: Caller passes one to enable or zero to disable.
*
* @verify: Confirm that a pin can perform a given function. The PTP
* Hardware Clock subsystem maintains the 'pin_config'
* array on behalf of the drivers, but the PHC subsystem
* assumes that every pin can perform every function. This
* hook gives drivers a way of telling the core about
* limitations on specific pins. This function must return
* zero if the function can be assigned to this pin, and
* nonzero otherwise.
* parameter pin: index of the pin in question.
* parameter func: the desired function to use.
* parameter chan: the function channel index to use.
*
ptp: introduce ptp auxiliary worker Many PTP drivers required to perform some asynchronous or periodic work, like periodically handling PHC counter overflow or handle delayed timestamp for RX/TX network packets. In most of the cases, such work is implemented using workqueues. Unfortunately, Kernel workqueues might introduce significant delay in work scheduling under high system load and on -RT, which could cause misbehavior of PTP drivers due to internal counter overflow, for example, and there is no way to tune its execution policy and priority manuallly. Hence, The kthread_worker can be used insted of workqueues, as it create separte named kthread for each worker and its its execution policy and priority can be configured using chrt tool. This prblem was reported for two drivers TI CPSW CPTS and dp83640, so instead of modifying each of these driver it was proposed to add PTP auxiliary worker to the PHC subsystem. The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker and kthread_delayed_work and introduces two new PHC subsystem APIs: - long (*do_aux_work)(struct ptp_clock_info *ptp) callback in ptp_clock_info structure, which driver should assign if it require to perform asynchronous or periodic work. Driver should return the delay of the PTP next auxiliary work scheduling time (>=0) or negative value in case further scheduling is not required. - int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which allows schedule PTP auxiliary work. The name of kthread_worker thread corresponds PTP PHC device name "ptp%d". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29 05:30:02 +07:00
* @do_work: Request driver to perform auxiliary (periodic) operations
* Driver should return delay of the next auxiliary work scheduling
* time (>=0) or negative value in case further scheduling
* is not required.
*
* Drivers should embed their ptp_clock_info within a private
* structure, obtaining a reference to it using container_of().
*
* The callbacks must all return zero on success, non-zero otherwise.
*/
struct ptp_clock_info {
struct module *owner;
char name[16];
s32 max_adj;
int n_alarm;
int n_ext_ts;
int n_per_out;
int n_pins;
int pps;
struct ptp_pin_desc *pin_config;
int (*adjfine)(struct ptp_clock_info *ptp, long scaled_ppm);
int (*adjfreq)(struct ptp_clock_info *ptp, s32 delta);
int (*adjtime)(struct ptp_clock_info *ptp, s64 delta);
int (*gettime64)(struct ptp_clock_info *ptp, struct timespec64 *ts);
int (*gettimex64)(struct ptp_clock_info *ptp, struct timespec64 *ts,
struct ptp_system_timestamp *sts);
ptp: Add PTP_SYS_OFFSET_PRECISE for driver crosstimestamping Currently, network /system cross-timestamping is performed in the PTP_SYS_OFFSET ioctl. The PTP clock driver reads gettimeofday() and the gettime64() callback provided by the driver. The cross-timestamp is best effort where the latency between the capture of system time (getnstimeofday()) and the device time (driver callback) may be significant. The getcrosststamp() callback and corresponding PTP_SYS_OFFSET_PRECISE ioctl allows the driver to perform this device/system correlation when for example cross timestamp hardware is available. Modern Intel systems can do this for onboard Ethernet controllers using the ART counter. There is virtually zero latency between captures of the ART and network device clock. The capabilities ioctl (PTP_CLOCK_GETCAPS), is augmented allowing applications to query whether or not drivers implement the getcrosststamp callback, providing more precise cross timestamping. Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: kevin.b.stanton@intel.com Cc: kevin.j.clarke@intel.com Cc: hpa@zytor.com Cc: jeffrey.t.kirsher@intel.com Cc: netdev@vger.kernel.org Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com> [jstultz: Commit subject tweaks] Signed-off-by: John Stultz <john.stultz@linaro.org>
2016-02-22 18:15:25 +07:00
int (*getcrosststamp)(struct ptp_clock_info *ptp,
struct system_device_crosststamp *cts);
int (*settime64)(struct ptp_clock_info *p, const struct timespec64 *ts);
int (*enable)(struct ptp_clock_info *ptp,
struct ptp_clock_request *request, int on);
int (*verify)(struct ptp_clock_info *ptp, unsigned int pin,
enum ptp_pin_function func, unsigned int chan);
ptp: introduce ptp auxiliary worker Many PTP drivers required to perform some asynchronous or periodic work, like periodically handling PHC counter overflow or handle delayed timestamp for RX/TX network packets. In most of the cases, such work is implemented using workqueues. Unfortunately, Kernel workqueues might introduce significant delay in work scheduling under high system load and on -RT, which could cause misbehavior of PTP drivers due to internal counter overflow, for example, and there is no way to tune its execution policy and priority manuallly. Hence, The kthread_worker can be used insted of workqueues, as it create separte named kthread for each worker and its its execution policy and priority can be configured using chrt tool. This prblem was reported for two drivers TI CPSW CPTS and dp83640, so instead of modifying each of these driver it was proposed to add PTP auxiliary worker to the PHC subsystem. The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker and kthread_delayed_work and introduces two new PHC subsystem APIs: - long (*do_aux_work)(struct ptp_clock_info *ptp) callback in ptp_clock_info structure, which driver should assign if it require to perform asynchronous or periodic work. Driver should return the delay of the PTP next auxiliary work scheduling time (>=0) or negative value in case further scheduling is not required. - int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which allows schedule PTP auxiliary work. The name of kthread_worker thread corresponds PTP PHC device name "ptp%d". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29 05:30:02 +07:00
long (*do_aux_work)(struct ptp_clock_info *ptp);
};
struct ptp_clock;
enum ptp_clock_events {
PTP_CLOCK_ALARM,
PTP_CLOCK_EXTTS,
PTP_CLOCK_PPS,
PTP_CLOCK_PPSUSR,
};
/**
* struct ptp_clock_event - decribes a PTP hardware clock event
*
* @type: One of the ptp_clock_events enumeration values.
* @index: Identifies the source of the event.
* @timestamp: When the event occurred (%PTP_CLOCK_EXTTS only).
* @pps_times: When the event occurred (%PTP_CLOCK_PPSUSR only).
*/
struct ptp_clock_event {
int type;
int index;
union {
u64 timestamp;
struct pps_event_time pps_times;
};
};
ptp_clock: Allow for it to be optional In order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers, this patch provides simple PTP stub functions to allow linkage of those drivers into the kernel even when the PTP subsystem is configured out. Drivers must be ready to accept NULL from ptp_clock_register() in that case. And to make it possible for PTP to be configured out, the select statement in those driver's Kconfig menu entries is converted to the new "imply" statement. This way the PTP subsystem may have Kconfig dependencies of its own, such as POSIX_TIMERS, without having to make those ethernet drivers unavailable if POSIX timers are cconfigured out. And when support for POSIX timers is selected again then the default config option for PTP clock support will automatically be adjusted accordingly. The pch_gbe driver is a bit special as it relies on extra code in drivers/ptp/ptp_pch.c. Therefore we let the make process descend into drivers/ptp/ even if PTP_1588_CLOCK is unselected. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/1478841010-28605-4-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 12:10:07 +07:00
#if IS_REACHABLE(CONFIG_PTP_1588_CLOCK)
/**
* ptp_clock_register() - register a PTP hardware clock driver
*
* @info: Structure describing the new clock.
* @parent: Pointer to the parent device of the new clock.
*
* Returns a valid pointer on success or PTR_ERR on failure. If PHC
* support is missing at the configuration level, this function
* returns NULL, and drivers are expected to gracefully handle that
* case separately.
*/
extern struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
struct device *parent);
/**
* ptp_clock_unregister() - unregister a PTP hardware clock driver
*
* @ptp: The clock to remove from service.
*/
extern int ptp_clock_unregister(struct ptp_clock *ptp);
/**
* ptp_clock_event() - notify the PTP layer about an event
*
* @ptp: The clock obtained from ptp_clock_register().
* @event: Message structure describing the event.
*/
extern void ptp_clock_event(struct ptp_clock *ptp,
struct ptp_clock_event *event);
/**
* ptp_clock_index() - obtain the device index of a PTP clock
*
* @ptp: The clock obtained from ptp_clock_register().
*/
extern int ptp_clock_index(struct ptp_clock *ptp);
/**
* ptp_find_pin() - obtain the pin index of a given auxiliary function
*
* @ptp: The clock obtained from ptp_clock_register().
* @func: One of the ptp_pin_function enumerated values.
* @chan: The particular functional channel to find.
* Return: Pin index in the range of zero to ptp_clock_caps.n_pins - 1,
* or -1 if the auxiliary function cannot be found.
*/
int ptp_find_pin(struct ptp_clock *ptp,
enum ptp_pin_function func, unsigned int chan);
ptp: introduce ptp auxiliary worker Many PTP drivers required to perform some asynchronous or periodic work, like periodically handling PHC counter overflow or handle delayed timestamp for RX/TX network packets. In most of the cases, such work is implemented using workqueues. Unfortunately, Kernel workqueues might introduce significant delay in work scheduling under high system load and on -RT, which could cause misbehavior of PTP drivers due to internal counter overflow, for example, and there is no way to tune its execution policy and priority manuallly. Hence, The kthread_worker can be used insted of workqueues, as it create separte named kthread for each worker and its its execution policy and priority can be configured using chrt tool. This prblem was reported for two drivers TI CPSW CPTS and dp83640, so instead of modifying each of these driver it was proposed to add PTP auxiliary worker to the PHC subsystem. The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker and kthread_delayed_work and introduces two new PHC subsystem APIs: - long (*do_aux_work)(struct ptp_clock_info *ptp) callback in ptp_clock_info structure, which driver should assign if it require to perform asynchronous or periodic work. Driver should return the delay of the PTP next auxiliary work scheduling time (>=0) or negative value in case further scheduling is not required. - int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which allows schedule PTP auxiliary work. The name of kthread_worker thread corresponds PTP PHC device name "ptp%d". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29 05:30:02 +07:00
/**
* ptp_schedule_worker() - schedule ptp auxiliary work
*
* @ptp: The clock obtained from ptp_clock_register().
* @delay: number of jiffies to wait before queuing
* See kthread_queue_delayed_work() for more info.
*/
int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay);
ptp_clock: Allow for it to be optional In order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers, this patch provides simple PTP stub functions to allow linkage of those drivers into the kernel even when the PTP subsystem is configured out. Drivers must be ready to accept NULL from ptp_clock_register() in that case. And to make it possible for PTP to be configured out, the select statement in those driver's Kconfig menu entries is converted to the new "imply" statement. This way the PTP subsystem may have Kconfig dependencies of its own, such as POSIX_TIMERS, without having to make those ethernet drivers unavailable if POSIX timers are cconfigured out. And when support for POSIX timers is selected again then the default config option for PTP clock support will automatically be adjusted accordingly. The pch_gbe driver is a bit special as it relies on extra code in drivers/ptp/ptp_pch.c. Therefore we let the make process descend into drivers/ptp/ even if PTP_1588_CLOCK is unselected. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/1478841010-28605-4-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 12:10:07 +07:00
#else
static inline struct ptp_clock *ptp_clock_register(struct ptp_clock_info *info,
struct device *parent)
{ return NULL; }
static inline int ptp_clock_unregister(struct ptp_clock *ptp)
{ return 0; }
static inline void ptp_clock_event(struct ptp_clock *ptp,
struct ptp_clock_event *event)
{ }
static inline int ptp_clock_index(struct ptp_clock *ptp)
{ return -1; }
static inline int ptp_find_pin(struct ptp_clock *ptp,
enum ptp_pin_function func, unsigned int chan)
{ return -1; }
ptp: introduce ptp auxiliary worker Many PTP drivers required to perform some asynchronous or periodic work, like periodically handling PHC counter overflow or handle delayed timestamp for RX/TX network packets. In most of the cases, such work is implemented using workqueues. Unfortunately, Kernel workqueues might introduce significant delay in work scheduling under high system load and on -RT, which could cause misbehavior of PTP drivers due to internal counter overflow, for example, and there is no way to tune its execution policy and priority manuallly. Hence, The kthread_worker can be used insted of workqueues, as it create separte named kthread for each worker and its its execution policy and priority can be configured using chrt tool. This prblem was reported for two drivers TI CPSW CPTS and dp83640, so instead of modifying each of these driver it was proposed to add PTP auxiliary worker to the PHC subsystem. The patch adds PTP auxiliary worker in PHC subsystem using kthread_worker and kthread_delayed_work and introduces two new PHC subsystem APIs: - long (*do_aux_work)(struct ptp_clock_info *ptp) callback in ptp_clock_info structure, which driver should assign if it require to perform asynchronous or periodic work. Driver should return the delay of the PTP next auxiliary work scheduling time (>=0) or negative value in case further scheduling is not required. - int ptp_schedule_worker(struct ptp_clock *ptp, unsigned long delay) which allows schedule PTP auxiliary work. The name of kthread_worker thread corresponds PTP PHC device name "ptp%d". Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-29 05:30:02 +07:00
static inline int ptp_schedule_worker(struct ptp_clock *ptp,
unsigned long delay)
{ return -EOPNOTSUPP; }
ptp_clock: Allow for it to be optional In order to break the hard dependency between the PTP clock subsystem and ethernet drivers capable of being clock providers, this patch provides simple PTP stub functions to allow linkage of those drivers into the kernel even when the PTP subsystem is configured out. Drivers must be ready to accept NULL from ptp_clock_register() in that case. And to make it possible for PTP to be configured out, the select statement in those driver's Kconfig menu entries is converted to the new "imply" statement. This way the PTP subsystem may have Kconfig dependencies of its own, such as POSIX_TIMERS, without having to make those ethernet drivers unavailable if POSIX timers are cconfigured out. And when support for POSIX timers is selected again then the default config option for PTP clock support will automatically be adjusted accordingly. The pch_gbe driver is a bit special as it relies on extra code in drivers/ptp/ptp_pch.c. Therefore we let the make process descend into drivers/ptp/ even if PTP_1588_CLOCK is unselected. Signed-off-by: Nicolas Pitre <nico@linaro.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Edward Cree <ecree@solarflare.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: John Stultz <john.stultz@linaro.org> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Cc: Paul Bolle <pebolle@tiscali.nl> Cc: linux-kbuild@vger.kernel.org Cc: netdev@vger.kernel.org Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/1478841010-28605-4-git-send-email-nicolas.pitre@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-11 12:10:07 +07:00
#endif
static inline void ptp_read_system_prets(struct ptp_system_timestamp *sts)
{
if (sts)
ktime_get_real_ts64(&sts->pre_ts);
}
static inline void ptp_read_system_postts(struct ptp_system_timestamp *sts)
{
if (sts)
ktime_get_real_ts64(&sts->post_ts);
}
#endif