linux_dsm_epyc7002/drivers/acpi/acpica/utxface.c

559 lines
16 KiB
C
Raw Normal View History

/******************************************************************************
*
* Module Name: utxface - External interfaces, miscellaneous utility functions
*
*****************************************************************************/
/*
* Copyright (C) 2000 - 2017, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*/
#define EXPORT_ACPI_INTERFACES
#include <acpi/acpi.h>
#include "accommon.h"
#include "acdebug.h"
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utxface")
/*******************************************************************************
*
* FUNCTION: acpi_terminate
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Shutdown the ACPICA subsystem and release all resources.
*
******************************************************************************/
acpi_status ACPI_INIT_FUNCTION acpi_terminate(void)
{
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 04:15:00 +07:00
ACPI_FUNCTION_TRACE(acpi_terminate);
/* Shutdown and free all resources */
acpi_ut_subsystem_shutdown();
/* Free the mutex objects */
acpi_ut_mutex_terminate();
/* Now we can shutdown the OS-dependent layer */
status = acpi_os_terminate();
return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL_INIT(acpi_terminate)
#ifndef ACPI_ASL_COMPILER
#ifdef ACPI_FUTURE_USAGE
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
/*******************************************************************************
*
* FUNCTION: acpi_subsystem_status
*
* PARAMETERS: None
*
* RETURN: Status of the ACPI subsystem
*
* DESCRIPTION: Other drivers that use the ACPI subsystem should call this
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* before making any other calls, to ensure the subsystem
* initialized successfully.
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
******************************************************************************/
acpi_status acpi_subsystem_status(void)
{
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
if (acpi_gbl_startup_flags & ACPI_INITIALIZED_OK) {
return (AE_OK);
} else {
return (AE_ERROR);
}
}
ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
/*******************************************************************************
*
* FUNCTION: acpi_get_system_info
*
ACPICA 20050408 from Bob Moore Fixed three cases in the interpreter where an "index" argument to an ASL function was still (internally) 32 bits instead of the required 64 bits. This was the Index argument to the Index, Mid, and Match operators. The "strupr" function is now permanently local (acpi_ut_strupr), since this is not a POSIX-defined function and not present in most kernel-level C libraries. References to the C library strupr function have been removed from the headers. Completed the deployment of static functions/prototypes. All prototypes with the static attribute have been moved from the headers to the owning C file. ACPICA 20050329 from Bob Moore An error is now generated if an attempt is made to create a Buffer Field of length zero (A CreateField with a length operand of zero.) The interpreter now issues a warning whenever executable code at the module level is detected during ACPI table load. This will give some idea of the prevalence of this type of code. Implemented support for references to named objects (other than control methods) within package objects. Enhanced package object output for the debug object. Package objects are now completely dumped, showing all elements. Enhanced miscellaneous object output for the debug object. Any object can now be written to the debug object (for example, a device object can be written, and the type of the object will be displayed.) The "static" qualifier has been added to all local functions across the core subsystem. The number of "long" lines (> 80 chars) within the source has been significantly reduced, by about 1/3. Cleaned up all header files to ensure that all CA/iASL functions are prototyped (even static functions) and the formatting is consistent. Two new header files have been added, acopcode.h and acnames.h. Removed several obsolete functions that were no longer used. Signed-off-by: Len Brown <len.brown@intel.com>
2005-04-19 09:49:35 +07:00
* PARAMETERS: out_buffer - A buffer to receive the resources for the
* device
*
* RETURN: status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
* state of the ACPI subsystem. It will return system information
* in the out_buffer.
*
* If the function fails an appropriate status will be returned
* and the value of out_buffer is undefined.
*
******************************************************************************/
acpi_status acpi_get_system_info(struct acpi_buffer *out_buffer)
{
struct acpi_system_info *info_ptr;
acpi_status status;
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 04:15:00 +07:00
ACPI_FUNCTION_TRACE(acpi_get_system_info);
/* Parameter validation */
status = acpi_ut_validate_buffer(out_buffer);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Validate/Allocate/Clear caller buffer */
status =
acpi_ut_initialize_buffer(out_buffer,
sizeof(struct acpi_system_info));
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
* Populate the return buffer
*/
info_ptr = (struct acpi_system_info *)out_buffer->pointer;
info_ptr->acpi_ca_version = ACPI_CA_VERSION;
/* System flags (ACPI capabilities) */
info_ptr->flags = ACPI_SYS_MODE_ACPI;
/* Timer resolution - 24 or 32 bits */
if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
info_ptr->timer_resolution = 24;
} else {
info_ptr->timer_resolution = 32;
}
/* Clear the reserved fields */
info_ptr->reserved1 = 0;
info_ptr->reserved2 = 0;
/* Current debug levels */
info_ptr->debug_layer = acpi_dbg_layer;
info_ptr->debug_level = acpi_dbg_level;
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_get_system_info)
/*******************************************************************************
*
* FUNCTION: acpi_get_statistics
*
* PARAMETERS: stats - Where the statistics are returned
*
* RETURN: status - the status of the call
*
* DESCRIPTION: Get the contents of the various system counters
*
******************************************************************************/
acpi_status acpi_get_statistics(struct acpi_statistics *stats)
{
ACPI_FUNCTION_TRACE(acpi_get_statistics);
/* Parameter validation */
if (!stats) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
/* Various interrupt-based event counters */
stats->sci_count = acpi_sci_count;
stats->gpe_count = acpi_gpe_count;
memcpy(stats->fixed_event_count, acpi_fixed_event_count,
sizeof(acpi_fixed_event_count));
/* Other counters */
stats->method_count = acpi_method_count;
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_get_statistics)
/*****************************************************************************
*
* FUNCTION: acpi_install_initialization_handler
*
* PARAMETERS: handler - Callback procedure
* function - Not (currently) used, see below
*
* RETURN: Status
*
* DESCRIPTION: Install an initialization handler
*
* TBD: When a second function is added, must save the Function also.
*
****************************************************************************/
acpi_status
acpi_install_initialization_handler(acpi_init_handler handler, u32 function)
{
if (!handler) {
return (AE_BAD_PARAMETER);
}
if (acpi_gbl_init_handler) {
return (AE_ALREADY_EXISTS);
}
acpi_gbl_init_handler = handler;
return (AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_install_initialization_handler)
ACPI: Enable build of AML interpreter debugger This patch enables ACPICA debugger files using a configurable CONFIG_ACPI_DEBUGGER configuration item. Those debugger related code that was originally masked as ACPI_FUTURE_USAGE now gets unmasked. Necessary OSL stubs are also added in this patch: 1. acpi_os_readable(): This should be arch specific in Linux, while this patch doesn't introduce real implementation and a complex mechanism to allow architecture specific acpi_os_readable() to be implemented to validate the address. It may be done by future commits. 2. acpi_os_get_line(): This is used to obtain debugger command input. This patch only introduces a simple KDB concept example in it and the example should be co-working with the code implemented in acpi_os_printf(). Since this KDB example won't be compiled unless ENABLE_DEBUGGER is defined and it seems Linux has already stopped to use ENABLE_DEBUGGER, thus do not expect it can work properly. This patch also cleans up all other ACPI_FUTURE_USAGE surroundings accordingly. 1. Since linkage error can be automatically detected, declaration in the headers needn't be surrounded by ACPI_FUTURE_USAGE. So only the following separate exported fuction bodies are masked by this macro (other exported fucntions may have already been masked at entire module level via drivers/acpi/acpica/Makefile): acpi_install_exception_handler() acpi_subsystem_status() acpi_get_system_info() acpi_get_statistics() acpi_install_initialization_handler() 2. Since strip can automatically zap the no-user functions, functions that are not marked with ACPI_EXPORT_SYMBOL() needn't get surrounded by ACPI_FUTURE_USAGE. So the following function which is not used by Linux kernel now won't get surrounded by this macro: acpi_ps_get_name() Signed-off-by: Lv Zheng <lv.zheng@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-19 09:25:56 +07:00
#endif
/*****************************************************************************
*
* FUNCTION: acpi_purge_cached_objects
*
* PARAMETERS: None
*
* RETURN: Status
*
* DESCRIPTION: Empty all caches (delete the cached objects)
*
****************************************************************************/
acpi_status acpi_purge_cached_objects(void)
{
ACPI: ACPICA 20060421 Removed a device initialization optimization introduced in 20051216 where the _STA method was not run unless an _INI was also present for the same device. This optimization could cause problems because it could allow _INI methods to be run within a not-present device subtree (If a not-present device had no _INI, _STA would not be run, the not-present status would not be discovered, and the children of the device would be incorrectly traversed.) Implemented a new _STA optimization where namespace subtrees that do not contain _INI are identified and ignored during device initialization. Selectively running _STA can significantly improve boot time on large machines (with assistance from Len Brown.) Implemented support for the device initialization case where the returned _STA flags indicate a device not-present but functioning. In this case, _INI is not run, but the device children are examined for presence, as per the ACPI specification. Implemented an additional change to the IndexField support in order to conform to MS behavior. The value written to the Index Register is not simply a byte offset, it is a byte offset in units of the access width of the parent Index Field. (Fiodor Suietov) Defined and deployed a new OSL interface, acpi_os_validate_address(). This interface is called during the creation of all AML operation regions, and allows the host OS to exert control over what addresses it will allow the AML code to access. Operation Regions whose addresses are disallowed will cause a runtime exception when they are actually accessed (will not affect or abort table loading.) Defined and deployed a new OSL interface, acpi_os_validate_interface(). This interface allows the host OS to match the various "optional" interface/behavior strings for the _OSI predefined control method as appropriate (with assistance from Bjorn Helgaas.) Restructured and corrected various problems in the exception handling code paths within DsCallControlMethod and DsTerminateControlMethod in dsmethod (with assistance from Takayoshi Kochi.) Modified the Linux source converter to ignore quoted string literals while converting identifiers from mixed to lower case. This will correct problems with the disassembler and other areas where such strings must not be modified. The ACPI_FUNCTION_* macros no longer require quotes around the function name. This allows the Linux source converter to convert the names, now that the converter ignores quoted strings. Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2006-04-22 04:15:00 +07:00
ACPI_FUNCTION_TRACE(acpi_purge_cached_objects);
(void)acpi_os_purge_cache(acpi_gbl_state_cache);
(void)acpi_os_purge_cache(acpi_gbl_operand_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_cache);
(void)acpi_os_purge_cache(acpi_gbl_ps_node_ext_cache);
return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_purge_cached_objects)
/*****************************************************************************
*
* FUNCTION: acpi_install_interface
*
* PARAMETERS: interface_name - The interface to install
*
* RETURN: Status
*
* DESCRIPTION: Install an _OSI interface to the global list
*
****************************************************************************/
acpi_status acpi_install_interface(acpi_string interface_name)
{
acpi_status status;
struct acpi_interface_info *interface_info;
/* Parameter validation */
if (!interface_name || (strlen(interface_name) == 0)) {
return (AE_BAD_PARAMETER);
}
status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Check if the interface name is already in the global list */
interface_info = acpi_ut_get_interface(interface_name);
if (interface_info) {
/*
* The interface already exists in the list. This is OK if the
* interface has been marked invalid -- just clear the bit.
*/
if (interface_info->flags & ACPI_OSI_INVALID) {
interface_info->flags &= ~ACPI_OSI_INVALID;
status = AE_OK;
} else {
status = AE_ALREADY_EXISTS;
}
} else {
/* New interface name, install into the global list */
status = acpi_ut_install_interface(interface_name);
}
acpi_os_release_mutex(acpi_gbl_osi_mutex);
return (status);
}
ACPI_EXPORT_SYMBOL(acpi_install_interface)
/*****************************************************************************
*
* FUNCTION: acpi_remove_interface
*
* PARAMETERS: interface_name - The interface to remove
*
* RETURN: Status
*
* DESCRIPTION: Remove an _OSI interface from the global list
*
****************************************************************************/
acpi_status acpi_remove_interface(acpi_string interface_name)
{
acpi_status status;
/* Parameter validation */
if (!interface_name || (strlen(interface_name) == 0)) {
return (AE_BAD_PARAMETER);
}
status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
if (ACPI_FAILURE(status)) {
return (status);
}
status = acpi_ut_remove_interface(interface_name);
acpi_os_release_mutex(acpi_gbl_osi_mutex);
return (status);
}
ACPI_EXPORT_SYMBOL(acpi_remove_interface)
/*****************************************************************************
*
* FUNCTION: acpi_install_interface_handler
*
* PARAMETERS: handler - The _OSI interface handler to install
* NULL means "remove existing handler"
*
* RETURN: Status
*
* DESCRIPTION: Install a handler for the predefined _OSI ACPI method.
* invoked during execution of the internal implementation of
* _OSI. A NULL handler simply removes any existing handler.
*
****************************************************************************/
acpi_status acpi_install_interface_handler(acpi_interface_handler handler)
{
acpi_status status;
status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
if (ACPI_FAILURE(status)) {
return (status);
}
if (handler && acpi_gbl_interface_handler) {
status = AE_ALREADY_EXISTS;
} else {
acpi_gbl_interface_handler = handler;
}
acpi_os_release_mutex(acpi_gbl_osi_mutex);
return (status);
}
ACPI_EXPORT_SYMBOL(acpi_install_interface_handler)
/*****************************************************************************
*
* FUNCTION: acpi_update_interfaces
*
* PARAMETERS: action - Actions to be performed during the
* update
*
* RETURN: Status
*
* DESCRIPTION: Update _OSI interface strings, disabling or enabling OS vendor
* string or/and feature group strings.
*
****************************************************************************/
acpi_status acpi_update_interfaces(u8 action)
{
acpi_status status;
status = acpi_os_acquire_mutex(acpi_gbl_osi_mutex, ACPI_WAIT_FOREVER);
if (ACPI_FAILURE(status)) {
return (status);
}
status = acpi_ut_update_interfaces(action);
acpi_os_release_mutex(acpi_gbl_osi_mutex);
return (status);
}
/*****************************************************************************
*
* FUNCTION: acpi_check_address_range
*
* PARAMETERS: space_id - Address space ID
* address - Start address
* length - Length
* warn - TRUE if warning on overlap desired
*
* RETURN: Count of the number of conflicts detected.
*
* DESCRIPTION: Check if the input address range overlaps any of the
* ASL operation region address ranges.
*
****************************************************************************/
u32
acpi_check_address_range(acpi_adr_space_type space_id,
acpi_physical_address address,
acpi_size length, u8 warn)
{
u32 overlaps;
acpi_status status;
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
return (0);
}
overlaps = acpi_ut_check_address_range(space_id, address,
(u32)length, warn);
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return (overlaps);
}
ACPI_EXPORT_SYMBOL(acpi_check_address_range)
#endif /* !ACPI_ASL_COMPILER */
/*******************************************************************************
*
* FUNCTION: acpi_decode_pld_buffer
*
* PARAMETERS: in_buffer - Buffer returned by _PLD method
* length - Length of the in_buffer
* return_buffer - Where the decode buffer is returned
*
* RETURN: Status and the decoded _PLD buffer. User must deallocate
* the buffer via ACPI_FREE.
*
* DESCRIPTION: Decode the bit-packed buffer returned by the _PLD method into
* a local struct that is much more useful to an ACPI driver.
*
******************************************************************************/
acpi_status
acpi_decode_pld_buffer(u8 *in_buffer,
acpi_size length, struct acpi_pld_info **return_buffer)
{
struct acpi_pld_info *pld_info;
u32 *buffer = ACPI_CAST_PTR(u32, in_buffer);
u32 dword;
/* Parameter validation */
if (!in_buffer || !return_buffer
|| (length < ACPI_PLD_REV1_BUFFER_SIZE)) {
return (AE_BAD_PARAMETER);
}
pld_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_pld_info));
if (!pld_info) {
return (AE_NO_MEMORY);
}
/* First 32-bit DWord */
ACPI_MOVE_32_TO_32(&dword, &buffer[0]);
pld_info->revision = ACPI_PLD_GET_REVISION(&dword);
pld_info->ignore_color = ACPI_PLD_GET_IGNORE_COLOR(&dword);
pld_info->red = ACPI_PLD_GET_RED(&dword);
pld_info->green = ACPI_PLD_GET_GREEN(&dword);
pld_info->blue = ACPI_PLD_GET_BLUE(&dword);
/* Second 32-bit DWord */
ACPI_MOVE_32_TO_32(&dword, &buffer[1]);
pld_info->width = ACPI_PLD_GET_WIDTH(&dword);
pld_info->height = ACPI_PLD_GET_HEIGHT(&dword);
/* Third 32-bit DWord */
ACPI_MOVE_32_TO_32(&dword, &buffer[2]);
pld_info->user_visible = ACPI_PLD_GET_USER_VISIBLE(&dword);
pld_info->dock = ACPI_PLD_GET_DOCK(&dword);
pld_info->lid = ACPI_PLD_GET_LID(&dword);
pld_info->panel = ACPI_PLD_GET_PANEL(&dword);
pld_info->vertical_position = ACPI_PLD_GET_VERTICAL(&dword);
pld_info->horizontal_position = ACPI_PLD_GET_HORIZONTAL(&dword);
pld_info->shape = ACPI_PLD_GET_SHAPE(&dword);
pld_info->group_orientation = ACPI_PLD_GET_ORIENTATION(&dword);
pld_info->group_token = ACPI_PLD_GET_TOKEN(&dword);
pld_info->group_position = ACPI_PLD_GET_POSITION(&dword);
pld_info->bay = ACPI_PLD_GET_BAY(&dword);
/* Fourth 32-bit DWord */
ACPI_MOVE_32_TO_32(&dword, &buffer[3]);
pld_info->ejectable = ACPI_PLD_GET_EJECTABLE(&dword);
pld_info->ospm_eject_required = ACPI_PLD_GET_OSPM_EJECT(&dword);
pld_info->cabinet_number = ACPI_PLD_GET_CABINET(&dword);
pld_info->card_cage_number = ACPI_PLD_GET_CARD_CAGE(&dword);
pld_info->reference = ACPI_PLD_GET_REFERENCE(&dword);
pld_info->rotation = ACPI_PLD_GET_ROTATION(&dword);
pld_info->order = ACPI_PLD_GET_ORDER(&dword);
if (length >= ACPI_PLD_REV2_BUFFER_SIZE) {
/* Fifth 32-bit DWord (Revision 2 of _PLD) */
ACPI_MOVE_32_TO_32(&dword, &buffer[4]);
pld_info->vertical_offset = ACPI_PLD_GET_VERT_OFFSET(&dword);
pld_info->horizontal_offset = ACPI_PLD_GET_HORIZ_OFFSET(&dword);
}
*return_buffer = pld_info;
return (AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_decode_pld_buffer)