linux_dsm_epyc7002/include/linux/smp.h

193 lines
4.9 KiB
C
Raw Normal View History

#ifndef __LINUX_SMP_H
#define __LINUX_SMP_H
/*
* Generic SMP support
* Alan Cox. <alan@redhat.com>
*/
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/list.h>
#include <linux/cpumask.h>
#include <linux/init.h>
#include <linux/llist.h>
typedef void (*smp_call_func_t)(void *info);
struct call_single_data {
struct llist_node llist;
smp_call_func_t func;
void *info;
u16 flags;
};
cpumask: add sysfs displays for configured and disabled cpu maps Impact: add new sysfs files. Add sysfs files "kernel_max" and "offline" to display the max CPU index allowed (NR_CPUS-1), and the map of cpus that are offline. Cpus can be offlined via HOTPLUG, disabled by the BIOS ACPI tables, or if they exceed the number of cpus allowed by the NR_CPUS config option, or the "maxcpus=NUM" kernel start parameter. The "possible_cpus=NUM" parameter can also extend the number of possible cpus allowed, in which case the cpus not present at startup will be in the offline state. (These cpus can be HOTPLUGGED ON after system startup [pending a follow-on patch to provide the capability via the /sys/devices/sys/cpu/cpuN/online mechanism to bring them online.]) By design, the "offlined cpus > possible cpus" display will always use the following formats: * all possible cpus online: "x$" or "x-y$" * some possible cpus offline: ".*,x$" or ".*,x-y$" where: x == number of possible cpus (nr_cpu_ids); and y == number of cpus >= NR_CPUS or maxcpus (if y > x). One use of this feature is for distros to select (or configure) the appropriate kernel to install for the resident system. Notes: * cpus offlined <= possible cpus will be printed for all architectures. * cpus offlined > possible cpus will only be printed for arches that set 'total_cpus' [X86 only in this patch]. Based on tip/cpus4096 + .../rusty/linux-2.6-for-ingo.git/master + x86-only-patches sent 12/15. Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-12-16 11:26:48 +07:00
/* total number of cpus in this system (may exceed NR_CPUS) */
extern unsigned int total_cpus;
int smp_call_function_single(int cpuid, smp_call_func_t func, void *info,
int wait);
/*
* Call a function on all processors
*/
int on_each_cpu(smp_call_func_t func, void *info, int wait);
/*
* Call a function on processors specified by mask, which might include
* the local one.
*/
void on_each_cpu_mask(const struct cpumask *mask, smp_call_func_t func,
void *info, bool wait);
/*
* Call a function on each processor for which the supplied function
* cond_func returns a positive value. This may include the local
* processor.
*/
void on_each_cpu_cond(bool (*cond_func)(int cpu, void *info),
smp_call_func_t func, void *info, bool wait,
gfp_t gfp_flags);
int smp_call_function_single_async(int cpu, struct call_single_data *csd);
#ifdef CONFIG_SMP
#include <linux/preempt.h>
#include <linux/kernel.h>
#include <linux/compiler.h>
#include <linux/thread_info.h>
#include <asm/smp.h>
/*
* main cross-CPU interfaces, handles INIT, TLB flush, STOP, etc.
* (defined in asm header):
*/
/*
* stops all CPUs but the current one:
*/
extern void smp_send_stop(void);
/*
* sends a 'reschedule' event to another CPU:
*/
extern void smp_send_reschedule(int cpu);
/*
* Prepare machine for booting other CPUs.
*/
extern void smp_prepare_cpus(unsigned int max_cpus);
/*
* Bring a CPU up
*/
extern int __cpu_up(unsigned int cpunum, struct task_struct *tidle);
/*
* Final polishing of CPUs
*/
extern void smp_cpus_done(unsigned int max_cpus);
/*
* Call a function on all other processors
*/
int smp_call_function(smp_call_func_t func, void *info, int wait);
void smp_call_function_many(const struct cpumask *mask,
smp_call_func_t func, void *info, bool wait);
int smp_call_function_any(const struct cpumask *mask,
smp_call_func_t func, void *info, int wait);
void kick_all_cpus_sync(void);
void wake_up_all_idle_cpus(void);
/*
* Generic and arch helpers
*/
generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts There is a problem that kdump(2nd kernel) sometimes hangs up due to a pending IPI from 1st kernel. Kernel panic occurs because IPI comes before call_single_queue is initialized. To fix the crash, rename init_call_single_data() to call_function_init() and call it in start_kernel() so that call_single_queue can be initialized before enabling interrupts. The details of the crash are: (1) 2nd kernel boots up (2) A pending IPI from 1st kernel comes when irqs are first enabled in start_kernel(). (3) Kernel tries to handle the interrupt, but call_single_queue is not initialized yet at this point. As a result, in the generic_smp_call_function_single_interrupt(), NULL pointer dereference occurs when list_replace_init() tries to access &q->list.next. Therefore this patch changes the name of init_call_single_data() to call_function_init() and calls it before local_irq_enable() in start_kernel(). Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Milton Miller <miltonm@bga.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-29 23:35:04 +07:00
void __init call_function_init(void);
void generic_smp_call_function_single_interrupt(void);
smp: make smp_call_function_many() use logic similar to smp_call_function_single() I'm testing swapout workload in a two-socket Xeon machine. The workload has 10 threads, each thread sequentially accesses separate memory region. TLB flush overhead is very big in the workload. For each page, page reclaim need move it from active lru list and then unmap it. Both need a TLB flush. And this is a multthread workload, TLB flush happens in 10 CPUs. In X86, TLB flush uses generic smp_call)function. So this workload stress smp_call_function_many heavily. Without patch, perf shows: + 24.49% [k] generic_smp_call_function_interrupt - 21.72% [k] _raw_spin_lock - _raw_spin_lock + 79.80% __page_check_address + 6.42% generic_smp_call_function_interrupt + 3.31% get_swap_page + 2.37% free_pcppages_bulk + 1.75% handle_pte_fault + 1.54% put_super + 1.41% grab_super_passive + 1.36% __swap_duplicate + 0.68% blk_flush_plug_list + 0.62% swap_info_get + 6.55% [k] flush_tlb_func + 6.46% [k] smp_call_function_many + 5.09% [k] call_function_interrupt + 4.75% [k] default_send_IPI_mask_sequence_phys + 2.18% [k] find_next_bit swapout throughput is around 1300M/s. With the patch, perf shows: - 27.23% [k] _raw_spin_lock - _raw_spin_lock + 80.53% __page_check_address + 8.39% generic_smp_call_function_single_interrupt + 2.44% get_swap_page + 1.76% free_pcppages_bulk + 1.40% handle_pte_fault + 1.15% __swap_duplicate + 1.05% put_super + 0.98% grab_super_passive + 0.86% blk_flush_plug_list + 0.57% swap_info_get + 8.25% [k] default_send_IPI_mask_sequence_phys + 7.55% [k] call_function_interrupt + 7.47% [k] smp_call_function_many + 7.25% [k] flush_tlb_func + 3.81% [k] _raw_spin_lock_irqsave + 3.78% [k] generic_smp_call_function_single_interrupt swapout throughput is around 1400M/s. So there is around a 7% improvement, and total cpu utilization doesn't change. Without the patch, cfd_data is shared by all CPUs. generic_smp_call_function_interrupt does read/write cfd_data several times which will create a lot of cache ping-pong. With the patch, the data becomes per-cpu. The ping-pong is avoided. And from the perf data, this doesn't make call_single_queue lock contend. Next step is to remove generic_smp_call_function_interrupt() from arch code. Signed-off-by: Shaohua Li <shli@fusionio.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-22 07:43:03 +07:00
#define generic_smp_call_function_interrupt \
generic_smp_call_function_single_interrupt
/*
* Mark the boot cpu "online" so that it can call console drivers in
* printk() and can access its per-cpu storage.
*/
void smp_prepare_boot_cpu(void);
extern unsigned int setup_max_cpus;
extern void __init setup_nr_cpu_ids(void);
extern void __init smp_init(void);
#else /* !SMP */
static inline void smp_send_stop(void) { }
/*
* These macros fold the SMP functionality into a single CPU system
*/
#define raw_smp_processor_id() 0
static inline int up_smp_call_function(smp_call_func_t func, void *info)
{
return 0;
}
#define smp_call_function(func, info, wait) \
(up_smp_call_function(func, info))
static inline void smp_send_reschedule(int cpu) { }
#define smp_prepare_boot_cpu() do {} while (0)
#define smp_call_function_many(mask, func, info, wait) \
(up_smp_call_function(func, info))
generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts There is a problem that kdump(2nd kernel) sometimes hangs up due to a pending IPI from 1st kernel. Kernel panic occurs because IPI comes before call_single_queue is initialized. To fix the crash, rename init_call_single_data() to call_function_init() and call it in start_kernel() so that call_single_queue can be initialized before enabling interrupts. The details of the crash are: (1) 2nd kernel boots up (2) A pending IPI from 1st kernel comes when irqs are first enabled in start_kernel(). (3) Kernel tries to handle the interrupt, but call_single_queue is not initialized yet at this point. As a result, in the generic_smp_call_function_single_interrupt(), NULL pointer dereference occurs when list_replace_init() tries to access &q->list.next. Therefore this patch changes the name of init_call_single_data() to call_function_init() and calls it before local_irq_enable() in start_kernel(). Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com> Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Acked-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Milton Miller <miltonm@bga.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: kexec@lists.infradead.org Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-29 23:35:04 +07:00
static inline void call_function_init(void) { }
static inline int
smp_call_function_any(const struct cpumask *mask, smp_call_func_t func,
void *info, int wait)
{
return smp_call_function_single(0, func, info, wait);
}
static inline void kick_all_cpus_sync(void) { }
static inline void wake_up_all_idle_cpus(void) { }
#endif /* !SMP */
/*
* smp_processor_id(): get the current CPU ID.
*
* if DEBUG_PREEMPT is enabled then we check whether it is
* used in a preemption-safe way. (smp_processor_id() is safe
* if it's used in a preemption-off critical section, or in
* a thread that is bound to the current CPU.)
*
* NOTE: raw_smp_processor_id() is for internal use only
* (smp_processor_id() is the preferred variant), but in rare
* instances it might also be used to turn off false positives
* (i.e. smp_processor_id() use that the debugging code reports but
* which use for some reason is legal). Don't use this to hack around
* the warning message, as your code might not work under PREEMPT.
*/
#ifdef CONFIG_DEBUG_PREEMPT
extern unsigned int debug_smp_processor_id(void);
# define smp_processor_id() debug_smp_processor_id()
#else
# define smp_processor_id() raw_smp_processor_id()
#endif
#define get_cpu() ({ preempt_disable(); smp_processor_id(); })
#define put_cpu() preempt_enable()
/*
* Callback to arch code if there's nosmp or maxcpus=0 on the
* boot command line:
*/
extern void arch_disable_smp_support(void);
extern void arch_enable_nonboot_cpus_begin(void);
extern void arch_enable_nonboot_cpus_end(void);
void smp_setup_processor_id(void);
#endif /* __LINUX_SMP_H */