linux_dsm_epyc7002/tools/perf/util/config.c

831 lines
16 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
// SPDX-License-Identifier: GPL-2.0
/*
* config.c
*
* Helper functions for parsing config items.
* Originally copied from GIT source.
*
* Copyright (C) Linus Torvalds, 2005
* Copyright (C) Johannes Schindelin, 2005
*
*/
#include <errno.h>
#include <sys/param.h>
#include "util.h"
#include "cache.h"
#include <subcmd/exec-cmd.h>
#include "util/hist.h" /* perf_hist_config */
perf tools: Introduce llvm config options This patch introduces [llvm] config section with 5 options. Following patches will use then to config llvm dynamica compiling. 'llvm-utils.[ch]' is introduced in this patch for holding all llvm/clang related stuffs. Example: [llvm] # Path to clang. If omit, search it from $PATH. clang-path = "/path/to/clang" # Cmdline template. Following line shows its default value. # Environment variable is used to passing options. # # *NOTE*: -D__KERNEL__ MUST appears before $CLANG_OPTIONS, # so user have a chance to use -U__KERNEL__ in $CLANG_OPTIONS # to cancel it. clang-bpf-cmd-template = "$CLANG_EXEC -D__KERNEL__ $CLANG_OPTIONS \ $KERNEL_INC_OPTIONS -Wno-unused-value \ -Wno-pointer-sign -working-directory \ $WORKING_DIR -c $CLANG_SOURCE -target \ bpf -O2 -o -" # Options passed to clang, will be passed to cmdline by # $CLANG_OPTIONS. clang-opt = "-Wno-unused-value -Wno-pointer-sign" # kbuild directory. If not set, use /lib/modules/`uname -r`/build. # If set to "" deliberately, skip kernel header auto-detector. kbuild-dir = "/path/to/kernel/build" # Options passed to 'make' when detecting kernel header options. kbuild-opts = "ARCH=x86_64" Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1437477214-149684-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-21 18:13:34 +07:00
#include "util/llvm-utils.h" /* perf_llvm_config */
#include "config.h"
#include <sys/types.h>
#include <sys/stat.h>
#include <unistd.h>
#include <linux/string.h>
#include "sane_ctype.h"
#define MAXNAME (256)
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
#define DEBUG_CACHE_DIR ".debug"
char buildid_dir[MAXPATHLEN]; /* root dir for buildid, binary cache */
static FILE *config_file;
static const char *config_file_name;
static int config_linenr;
static int config_file_eof;
perf config: Introduce new init() and exit() Many sub-commands use perf_config() but everytime perf_config() is called, perf_config() always read config files. (i.e. user config '~/.perfconfig' and system config '$(sysconfdir)/perfconfig') But it is better to use the config set that already contains all config key-value pairs to avoid this repetitive work reading the config files in perf_config(). (the config set mean a static variable 'config_set') In other words, if new perf_config__init() is called, only first time 'config_set' is initialized collecting all configs from the config files. And then we could use new perf_config() like old perf_config(). When a sub-command finished, free the config set by perf_config__exit() at run_builtin(). If we do, 'config_set' can be reused wherever perf_config() is called and a feature of old perf_config() is the same as new perf_config() work without the repetitive work that read the config files. In summary, in order to use features about configuration, we can call the functions at perf.c and other source files as below. # initialize a config set perf_config__init() # configure actual variables from a config set perf_config() # eliminate allocated config set perf_config__exit() # destroy existing config set and initialize a new config set. perf_config__refresh() Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1466691272-24117-3-git-send-email-treeze.taeung@gmail.com [ 'init' counterpart is 'exit', not 'finish' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 21:14:31 +07:00
static struct perf_config_set *config_set;
const char *config_exclusive_filename;
static int get_next_char(void)
{
int c;
FILE *f;
c = '\n';
if ((f = config_file) != NULL) {
c = fgetc(f);
if (c == '\r') {
/* DOS like systems */
c = fgetc(f);
if (c != '\n') {
ungetc(c, f);
c = '\r';
}
}
if (c == '\n')
config_linenr++;
if (c == EOF) {
config_file_eof = 1;
c = '\n';
}
}
return c;
}
static char *parse_value(void)
{
static char value[1024];
int quote = 0, comment = 0, space = 0;
size_t len = 0;
for (;;) {
int c = get_next_char();
if (len >= sizeof(value) - 1)
return NULL;
if (c == '\n') {
if (quote)
return NULL;
value[len] = 0;
return value;
}
if (comment)
continue;
if (isspace(c) && !quote) {
space = 1;
continue;
}
if (!quote) {
if (c == ';' || c == '#') {
comment = 1;
continue;
}
}
if (space) {
if (len)
value[len++] = ' ';
space = 0;
}
if (c == '\\') {
c = get_next_char();
switch (c) {
case '\n':
continue;
case 't':
c = '\t';
break;
case 'b':
c = '\b';
break;
case 'n':
c = '\n';
break;
/* Some characters escape as themselves */
case '\\': case '"':
break;
/* Reject unknown escape sequences */
default:
return NULL;
}
value[len++] = c;
continue;
}
if (c == '"') {
quote = 1-quote;
continue;
}
value[len++] = c;
}
}
static inline int iskeychar(int c)
{
return isalnum(c) || c == '-' || c == '_';
}
static int get_value(config_fn_t fn, void *data, char *name, unsigned int len)
{
int c;
char *value;
/* Get the full name */
for (;;) {
c = get_next_char();
if (config_file_eof)
break;
if (!iskeychar(c))
break;
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
name[len++] = c;
if (len >= MAXNAME)
return -1;
}
name[len] = 0;
while (c == ' ' || c == '\t')
c = get_next_char();
value = NULL;
if (c != '\n') {
if (c != '=')
return -1;
value = parse_value();
if (!value)
return -1;
}
return fn(name, value, data);
}
static int get_extended_base_var(char *name, int baselen, int c)
{
do {
if (c == '\n')
return -1;
c = get_next_char();
} while (isspace(c));
/* We require the format to be '[base "extension"]' */
if (c != '"')
return -1;
name[baselen++] = '.';
for (;;) {
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 17:26:57 +07:00
int ch = get_next_char();
if (ch == '\n')
return -1;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 17:26:57 +07:00
if (ch == '"')
break;
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 17:26:57 +07:00
if (ch == '\\') {
ch = get_next_char();
if (ch == '\n')
return -1;
}
perf: Enable more compiler warnings Related to a shadowed variable bug fix Valdis Kletnieks noticed that perf does not get built with -Wshadow, which could have helped us avoid the bug. So enable -Wshadow and also enable the following warnings on perf builds, in addition to the already enabled -Wall -Wextra -std=gnu99 warnings: -Wcast-align -Wformat=2 -Wshadow -Winit-self -Wpacked -Wredundant-decls -Wstack-protector -Wstrict-aliasing=3 -Wswitch-default -Wswitch-enum -Wno-system-headers -Wundef -Wvolatile-register-var -Wwrite-strings -Wbad-function-cast -Wmissing-declarations -Wmissing-prototypes -Wnested-externs -Wold-style-definition -Wstrict-prototypes -Wdeclaration-after-statement And change/fix the perf code to build cleanly under GCC 4.3.2. The list of warnings enablement is rather arbitrary: it's based on my (quick) reading of the GCC manpages and trying them on perf. I categorized the warnings based on individually enabling them and looking whether they trigger something in the perf build. If i liked those warnings (i.e. if they trigger for something that arguably could be improved) i enabled the warning. If the warnings seemed to come from language laywers spamming the build with tons of nuisance warnings i generally kept them off. Most of the sign conversion related warnings were in this category. (A second patch enabling some of the sign warnings might be welcome - sign bugs can be nasty.) I also kept warnings that seem to make sense from their manpage description and which produced no actual warnings on our code base. These warnings might still be turned off if they end up being a nuisance. I also left out a few warnings that are not supported in older compilers. [ Note that these changes might break the build on older compilers i did not test, or on non-x86 architectures that produce different warnings, so more testing would be welcome. ] Reported-by: Valdis.Kletnieks@vt.edu Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-15 17:26:57 +07:00
name[baselen++] = ch;
if (baselen > MAXNAME / 2)
return -1;
}
/* Final ']' */
if (get_next_char() != ']')
return -1;
return baselen;
}
static int get_base_var(char *name)
{
int baselen = 0;
for (;;) {
int c = get_next_char();
if (config_file_eof)
return -1;
if (c == ']')
return baselen;
if (isspace(c))
return get_extended_base_var(name, baselen, c);
if (!iskeychar(c) && c != '.')
return -1;
if (baselen > MAXNAME / 2)
return -1;
name[baselen++] = tolower(c);
}
}
static int perf_parse_file(config_fn_t fn, void *data)
{
int comment = 0;
int baselen = 0;
static char var[MAXNAME];
/* U+FEFF Byte Order Mark in UTF8 */
static const unsigned char *utf8_bom = (unsigned char *) "\xef\xbb\xbf";
const unsigned char *bomptr = utf8_bom;
for (;;) {
int line, c = get_next_char();
if (bomptr && *bomptr) {
/* We are at the file beginning; skip UTF8-encoded BOM
* if present. Sane editors won't put this in on their
* own, but e.g. Windows Notepad will do it happily. */
if ((unsigned char) c == *bomptr) {
bomptr++;
continue;
} else {
/* Do not tolerate partial BOM. */
if (bomptr != utf8_bom)
break;
/* No BOM at file beginning. Cool. */
bomptr = NULL;
}
}
if (c == '\n') {
if (config_file_eof)
return 0;
comment = 0;
continue;
}
if (comment || isspace(c))
continue;
if (c == '#' || c == ';') {
comment = 1;
continue;
}
if (c == '[') {
baselen = get_base_var(var);
if (baselen <= 0)
break;
var[baselen++] = '.';
var[baselen] = 0;
continue;
}
if (!isalpha(c))
break;
var[baselen] = tolower(c);
/*
* The get_value function might or might not reach the '\n',
* so saving the current line number for error reporting.
*/
line = config_linenr;
if (get_value(fn, data, var, baselen+1) < 0) {
config_linenr = line;
break;
}
}
pr_err("bad config file line %d in %s\n", config_linenr, config_file_name);
return -1;
}
static int parse_unit_factor(const char *end, unsigned long *val)
{
if (!*end)
return 1;
else if (!strcasecmp(end, "k")) {
*val *= 1024;
return 1;
}
else if (!strcasecmp(end, "m")) {
*val *= 1024 * 1024;
return 1;
}
else if (!strcasecmp(end, "g")) {
*val *= 1024 * 1024 * 1024;
return 1;
}
return 0;
}
static int perf_parse_llong(const char *value, long long *ret)
{
if (value && *value) {
char *end;
long long val = strtoll(value, &end, 0);
unsigned long factor = 1;
if (!parse_unit_factor(end, &factor))
return 0;
*ret = val * factor;
return 1;
}
return 0;
}
static int perf_parse_long(const char *value, long *ret)
{
if (value && *value) {
char *end;
long val = strtol(value, &end, 0);
unsigned long factor = 1;
if (!parse_unit_factor(end, &factor))
return 0;
*ret = val * factor;
return 1;
}
return 0;
}
static void bad_config(const char *name)
{
if (config_file_name)
pr_warning("bad config value for '%s' in %s, ignoring...\n", name, config_file_name);
else
pr_warning("bad config value for '%s', ignoring...\n", name);
}
int perf_config_u64(u64 *dest, const char *name, const char *value)
{
long long ret = 0;
if (!perf_parse_llong(value, &ret)) {
bad_config(name);
return -1;
}
*dest = ret;
return 0;
}
int perf_config_int(int *dest, const char *name, const char *value)
{
long ret = 0;
if (!perf_parse_long(value, &ret)) {
bad_config(name);
return -1;
}
*dest = ret;
return 0;
}
static int perf_config_bool_or_int(const char *name, const char *value, int *is_bool)
{
int ret;
*is_bool = 1;
if (!value)
return 1;
if (!*value)
return 0;
if (!strcasecmp(value, "true") || !strcasecmp(value, "yes") || !strcasecmp(value, "on"))
return 1;
if (!strcasecmp(value, "false") || !strcasecmp(value, "no") || !strcasecmp(value, "off"))
return 0;
*is_bool = 0;
return perf_config_int(&ret, name, value) < 0 ? -1 : ret;
}
int perf_config_bool(const char *name, const char *value)
{
int discard;
return !!perf_config_bool_or_int(name, value, &discard);
}
static const char *perf_config_dirname(const char *name, const char *value)
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
{
if (!name)
return NULL;
return value;
}
static int perf_buildid_config(const char *var, const char *value)
{
/* same dir for all commands */
if (!strcmp(var, "buildid.dir")) {
const char *dir = perf_config_dirname(var, value);
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 23:44:10 +07:00
if (!dir) {
pr_err("Invalid buildid directory!\n");
return -1;
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 23:44:10 +07:00
}
strncpy(buildid_dir, dir, MAXPATHLEN-1);
buildid_dir[MAXPATHLEN-1] = '\0';
}
return 0;
}
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 05:15:03 +07:00
static int perf_default_core_config(const char *var __maybe_unused,
const char *value __maybe_unused)
{
/* Add other config variables here. */
return 0;
}
static int perf_ui_config(const char *var, const char *value)
{
/* Add other config variables here. */
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 23:44:10 +07:00
if (!strcmp(var, "ui.show-headers"))
symbol_conf.show_hist_headers = perf_config_bool(var, value);
perf tools: Propagate perf_config() errors Previously these were being ignored, sometimes silently. Stop doing that, emitting debug messages and handling the errors. Testing it: $ cat ~/.perfconfig cat: /home/acme/.perfconfig: No such file or directory $ perf stat -e cycles usleep 1 Performance counter stats for 'usleep 1': 938,996 cycles:u 0.003813731 seconds time elapsed $ perf top --stdio Error: You may not have permission to collect system-wide stats. Consider tweaking /proc/sys/kernel/perf_event_paranoid, <SNIP> [ perf record: Captured and wrote 0.019 MB perf.data (7 samples) ] [acme@jouet linux]$ perf report --stdio # To display the perf.data header info, please use --header/--header-only options. # Overhead Command Shared Object Symbol # ........ ....... ................. ......................... 71.77% usleep libc-2.24.so [.] _dl_addr 27.07% usleep ld-2.24.so [.] _dl_next_ld_env_entry 1.13% usleep [kernel.kallsyms] [k] page_fault $ $ touch ~/.perfconfig $ ls -la ~/.perfconfig -rw-rw-r--. 1 acme acme 0 Jan 27 12:14 /home/acme/.perfconfig $ $ perf stat -e instructions usleep 1 Performance counter stats for 'usleep 1': 244,610 instructions:u 0.000805383 seconds time elapsed $ [root@jouet ~]# chown acme.acme ~/.perfconfig [root@jouet ~]# perf stat -e cycles usleep 1 Warning: File /root/.perfconfig not owned by current user or root, ignoring it. Performance counter stats for 'usleep 1': 937,615 cycles 0.000836931 seconds time elapsed # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-j2rq96so6xdqlr8p8rd6a3jx@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2017-01-24 23:44:10 +07:00
return 0;
}
perf tools: Use __maybe_used for unused variables perf defines both __used and __unused variables to use for marking unused variables. The variable __used is defined to __attribute__((__unused__)), which contradicts the kernel definition to __attribute__((__used__)) for new gcc versions. On Android, __used is also defined in system headers and this leads to warnings like: warning: '__used__' attribute ignored __unused is not defined in the kernel and is not a standard definition. If __unused is included everywhere instead of __used, this leads to conflicts with glibc headers, since glibc has a variables with this name in its headers. The best approach is to use __maybe_unused, the definition used in the kernel for __attribute__((unused)). In this way there is only one definition in perf sources (instead of 2 definitions that point to the same thing: __used and __unused) and it works on both Linux and Android. This patch simply replaces all instances of __used and __unused with __maybe_unused. Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Acked-by: Pekka Enberg <penberg@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com [ committer note: fixed up conflict with a116e05 in builtin-sched.c ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2012-09-11 05:15:03 +07:00
int perf_default_config(const char *var, const char *value,
void *dummy __maybe_unused)
{
if (strstarts(var, "core."))
return perf_default_core_config(var, value);
if (strstarts(var, "hist."))
return perf_hist_config(var, value);
if (strstarts(var, "ui."))
return perf_ui_config(var, value);
if (strstarts(var, "call-graph."))
return perf_callchain_config(var, value);
if (strstarts(var, "llvm."))
perf tools: Introduce llvm config options This patch introduces [llvm] config section with 5 options. Following patches will use then to config llvm dynamica compiling. 'llvm-utils.[ch]' is introduced in this patch for holding all llvm/clang related stuffs. Example: [llvm] # Path to clang. If omit, search it from $PATH. clang-path = "/path/to/clang" # Cmdline template. Following line shows its default value. # Environment variable is used to passing options. # # *NOTE*: -D__KERNEL__ MUST appears before $CLANG_OPTIONS, # so user have a chance to use -U__KERNEL__ in $CLANG_OPTIONS # to cancel it. clang-bpf-cmd-template = "$CLANG_EXEC -D__KERNEL__ $CLANG_OPTIONS \ $KERNEL_INC_OPTIONS -Wno-unused-value \ -Wno-pointer-sign -working-directory \ $WORKING_DIR -c $CLANG_SOURCE -target \ bpf -O2 -o -" # Options passed to clang, will be passed to cmdline by # $CLANG_OPTIONS. clang-opt = "-Wno-unused-value -Wno-pointer-sign" # kbuild directory. If not set, use /lib/modules/`uname -r`/build. # If set to "" deliberately, skip kernel header auto-detector. kbuild-dir = "/path/to/kernel/build" # Options passed to 'make' when detecting kernel header options. kbuild-opts = "ARCH=x86_64" Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1437477214-149684-1-git-send-email-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-21 18:13:34 +07:00
return perf_llvm_config(var, value);
if (strstarts(var, "buildid."))
return perf_buildid_config(var, value);
/* Add other config variables here. */
return 0;
}
static int perf_config_from_file(config_fn_t fn, const char *filename, void *data)
{
int ret;
FILE *f = fopen(filename, "r");
ret = -1;
if (f) {
config_file = f;
config_file_name = filename;
config_linenr = 1;
config_file_eof = 0;
ret = perf_parse_file(fn, data);
fclose(f);
config_file_name = NULL;
}
return ret;
}
const char *perf_etc_perfconfig(void)
{
static const char *system_wide;
if (!system_wide)
system_wide = system_path(ETC_PERFCONFIG);
return system_wide;
}
static int perf_env_bool(const char *k, int def)
{
const char *v = getenv(k);
return v ? perf_config_bool(k, v) : def;
}
static int perf_config_system(void)
{
return !perf_env_bool("PERF_CONFIG_NOSYSTEM", 0);
}
static int perf_config_global(void)
{
return !perf_env_bool("PERF_CONFIG_NOGLOBAL", 0);
}
static struct perf_config_section *find_section(struct list_head *sections,
const char *section_name)
{
struct perf_config_section *section;
list_for_each_entry(section, sections, node)
if (!strcmp(section->name, section_name))
return section;
return NULL;
}
static struct perf_config_item *find_config_item(const char *name,
struct perf_config_section *section)
{
struct perf_config_item *item;
list_for_each_entry(item, &section->items, node)
if (!strcmp(item->name, name))
return item;
return NULL;
}
static struct perf_config_section *add_section(struct list_head *sections,
const char *section_name)
{
struct perf_config_section *section = zalloc(sizeof(*section));
if (!section)
return NULL;
INIT_LIST_HEAD(&section->items);
section->name = strdup(section_name);
if (!section->name) {
pr_debug("%s: strdup failed\n", __func__);
free(section);
return NULL;
}
list_add_tail(&section->node, sections);
return section;
}
static struct perf_config_item *add_config_item(struct perf_config_section *section,
const char *name)
{
struct perf_config_item *item = zalloc(sizeof(*item));
if (!item)
return NULL;
item->name = strdup(name);
if (!item->name) {
pr_debug("%s: strdup failed\n", __func__);
free(item);
return NULL;
}
list_add_tail(&item->node, &section->items);
return item;
}
static int set_value(struct perf_config_item *item, const char *value)
{
char *val = strdup(value);
if (!val)
return -1;
zfree(&item->value);
item->value = val;
return 0;
}
static int collect_config(const char *var, const char *value,
void *perf_config_set)
{
int ret = -1;
char *ptr, *key;
char *section_name, *name;
struct perf_config_section *section = NULL;
struct perf_config_item *item = NULL;
struct perf_config_set *set = perf_config_set;
struct list_head *sections;
if (set == NULL)
return -1;
sections = &set->sections;
key = ptr = strdup(var);
if (!key) {
pr_debug("%s: strdup failed\n", __func__);
return -1;
}
section_name = strsep(&ptr, ".");
name = ptr;
if (name == NULL || value == NULL)
goto out_free;
section = find_section(sections, section_name);
if (!section) {
section = add_section(sections, section_name);
if (!section)
goto out_free;
}
item = find_config_item(name, section);
if (!item) {
item = add_config_item(section, name);
if (!item)
goto out_free;
}
/* perf_config_set can contain both user and system config items.
* So we should know where each value is from.
* The classification would be needed when a particular config file
* is overwrited by setting feature i.e. set_config().
*/
if (strcmp(config_file_name, perf_etc_perfconfig()) == 0) {
section->from_system_config = true;
item->from_system_config = true;
} else {
section->from_system_config = false;
item->from_system_config = false;
}
ret = set_value(item, value);
return ret;
out_free:
free(key);
return -1;
}
int perf_config_set__collect(struct perf_config_set *set, const char *file_name,
const char *var, const char *value)
{
config_file_name = file_name;
return collect_config(var, value, set);
}
static int perf_config_set__init(struct perf_config_set *set)
{
int ret = -1;
const char *home = NULL;
char *user_config;
struct stat st;
/* Setting $PERF_CONFIG makes perf read _only_ the given config file. */
if (config_exclusive_filename)
return perf_config_from_file(collect_config, config_exclusive_filename, set);
if (perf_config_system() && !access(perf_etc_perfconfig(), R_OK)) {
if (perf_config_from_file(collect_config, perf_etc_perfconfig(), set) < 0)
goto out;
}
home = getenv("HOME");
/*
* Skip reading user config if:
* - there is no place to read it from (HOME)
* - we are asked not to (PERF_CONFIG_NOGLOBAL=1)
*/
if (!home || !*home || !perf_config_global())
return 0;
user_config = strdup(mkpath("%s/.perfconfig", home));
if (user_config == NULL) {
pr_warning("Not enough memory to process %s/.perfconfig, ignoring it.", home);
goto out;
}
if (stat(user_config, &st) < 0) {
if (errno == ENOENT)
ret = 0;
goto out_free;
}
ret = 0;
if (st.st_uid && (st.st_uid != geteuid())) {
pr_warning("File %s not owned by current user or root, ignoring it.", user_config);
goto out_free;
}
if (st.st_size)
ret = perf_config_from_file(collect_config, user_config, set);
out_free:
free(user_config);
out:
return ret;
}
struct perf_config_set *perf_config_set__new(void)
{
struct perf_config_set *set = zalloc(sizeof(*set));
if (set) {
INIT_LIST_HEAD(&set->sections);
perf_config_set__init(set);
}
return set;
}
static int perf_config__init(void)
{
if (config_set == NULL)
config_set = perf_config_set__new();
return config_set == NULL;
}
perf config: Introduce new init() and exit() Many sub-commands use perf_config() but everytime perf_config() is called, perf_config() always read config files. (i.e. user config '~/.perfconfig' and system config '$(sysconfdir)/perfconfig') But it is better to use the config set that already contains all config key-value pairs to avoid this repetitive work reading the config files in perf_config(). (the config set mean a static variable 'config_set') In other words, if new perf_config__init() is called, only first time 'config_set' is initialized collecting all configs from the config files. And then we could use new perf_config() like old perf_config(). When a sub-command finished, free the config set by perf_config__exit() at run_builtin(). If we do, 'config_set' can be reused wherever perf_config() is called and a feature of old perf_config() is the same as new perf_config() work without the repetitive work that read the config files. In summary, in order to use features about configuration, we can call the functions at perf.c and other source files as below. # initialize a config set perf_config__init() # configure actual variables from a config set perf_config() # eliminate allocated config set perf_config__exit() # destroy existing config set and initialize a new config set. perf_config__refresh() Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1466691272-24117-3-git-send-email-treeze.taeung@gmail.com [ 'init' counterpart is 'exit', not 'finish' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 21:14:31 +07:00
int perf_config(config_fn_t fn, void *data)
{
int ret = 0;
char key[BUFSIZ];
struct perf_config_section *section;
struct perf_config_item *item;
if (config_set == NULL && perf_config__init())
perf config: Introduce new init() and exit() Many sub-commands use perf_config() but everytime perf_config() is called, perf_config() always read config files. (i.e. user config '~/.perfconfig' and system config '$(sysconfdir)/perfconfig') But it is better to use the config set that already contains all config key-value pairs to avoid this repetitive work reading the config files in perf_config(). (the config set mean a static variable 'config_set') In other words, if new perf_config__init() is called, only first time 'config_set' is initialized collecting all configs from the config files. And then we could use new perf_config() like old perf_config(). When a sub-command finished, free the config set by perf_config__exit() at run_builtin(). If we do, 'config_set' can be reused wherever perf_config() is called and a feature of old perf_config() is the same as new perf_config() work without the repetitive work that read the config files. In summary, in order to use features about configuration, we can call the functions at perf.c and other source files as below. # initialize a config set perf_config__init() # configure actual variables from a config set perf_config() # eliminate allocated config set perf_config__exit() # destroy existing config set and initialize a new config set. perf_config__refresh() Signed-off-by: Taeung Song <treeze.taeung@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1466691272-24117-3-git-send-email-treeze.taeung@gmail.com [ 'init' counterpart is 'exit', not 'finish' ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-23 21:14:31 +07:00
return -1;
perf_config_set__for_each_entry(config_set, section, item) {
char *value = item->value;
if (value) {
scnprintf(key, sizeof(key), "%s.%s",
section->name, item->name);
ret = fn(key, value, data);
if (ret < 0) {
pr_err("Error: wrong config key-value pair %s=%s\n",
key, value);
break;
}
}
}
return ret;
}
void perf_config__exit(void)
{
perf_config_set__delete(config_set);
config_set = NULL;
}
void perf_config__refresh(void)
{
perf_config__exit();
perf_config__init();
}
static void perf_config_item__delete(struct perf_config_item *item)
{
zfree(&item->name);
zfree(&item->value);
free(item);
}
static void perf_config_section__purge(struct perf_config_section *section)
{
struct perf_config_item *item, *tmp;
list_for_each_entry_safe(item, tmp, &section->items, node) {
list_del_init(&item->node);
perf_config_item__delete(item);
}
}
static void perf_config_section__delete(struct perf_config_section *section)
{
perf_config_section__purge(section);
zfree(&section->name);
free(section);
}
static void perf_config_set__purge(struct perf_config_set *set)
{
struct perf_config_section *section, *tmp;
list_for_each_entry_safe(section, tmp, &set->sections, node) {
list_del_init(&section->node);
perf_config_section__delete(section);
}
}
void perf_config_set__delete(struct perf_config_set *set)
{
if (set == NULL)
return;
perf_config_set__purge(set);
free(set);
}
/*
* Call this to report error for your variable that should not
* get a boolean value (i.e. "[my] var" means "true").
*/
int config_error_nonbool(const char *var)
{
pr_err("Missing value for '%s'", var);
return -1;
}
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
void set_buildid_dir(const char *dir)
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
{
if (dir)
scnprintf(buildid_dir, MAXPATHLEN-1, "%s", dir);
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
/* default to $HOME/.debug */
if (buildid_dir[0] == '\0') {
char *home = getenv("HOME");
if (home) {
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
snprintf(buildid_dir, MAXPATHLEN-1, "%s/%s",
home, DEBUG_CACHE_DIR);
perf buildid: add perfconfig option to specify buildid cache dir This patch adds the ability to specify an alternate directory to store the buildid cache (buildids, copy of binaries). By default, it is hardcoded to $HOME/.debug. This directory contains immutable data. The layout of the directory is such that no conflicts in filenames are possible. A modification in a file, yields a different buildid and thus a different location in the subdir hierarchy. You may want to put the buildid cache elsewhere because of disk space limitation or simply to share the cache between users. It is also useful for remote collect vs. local analysis of profiles. This patch adds a new config option to the perfconfig file. Under the tag 'buildid', there is a dir option. For instance, if you have: $ cat /etc/perfconfig [buildid] dir = /var/cache/perf-buildid All buildids and binaries are be saved in the directory specified. The perf record, buildid-list, buildid-cache, report, annotate, and archive commands will it to pull information out. The option can be set in the system-wide perfconfig file or in the $HOME/.perfconfig file. Cc: David S. Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> LKML-Reference: <4c055fb7.df0ce30a.5f0d.ffffae52@mx.google.com> Signed-off-by: Stephane Eranian <eranian@google.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-06-02 02:25:01 +07:00
} else {
strncpy(buildid_dir, DEBUG_CACHE_DIR, MAXPATHLEN-1);
}
buildid_dir[MAXPATHLEN-1] = '\0';
}
/* for communicating with external commands */
setenv("PERF_BUILDID_DIR", buildid_dir, 1);
}