linux_dsm_epyc7002/arch/arm/boot/dts/omap3430-sdp.dts

196 lines
4.1 KiB
Plaintext
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*/
/dts-v1/;
#include "omap34xx.dtsi"
/ {
model = "TI OMAP3430 SDP";
ARM: dts: omap3: bulk convert compatible to be explicitly ti,omap3430 or ti,omap3630 or ti,am3517 For the ti-cpufreq driver we need a clear separation between omap34 and omap36 families since they have different silicon revisions and efuses. So far ti,omap3630/ti,omap36xx is just an additional flag to ti,omap3 while omap34 has no required entry. Therefore we can not match omap34 boards properly. This needs to add ti,omap3430 and ti,omap3630 where it is missing. We also clean up some instances of missing ti,am3517 so that we can rely on seeing either one of: ti,am3517 ti,omap3430 ti,omap3630 in addition to ti,omap3. We leave ti,omap34xx and ti,omap36xx untouched for compatibility. The script to do the conversion is: manually fix am3517_mt_ventoux.dts find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap34xx"/"ti,omap3430", "ti,omap34xx"/' {} \; find arch/arm/boot/dts -name '*.dts*' -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; -exec sed -i '' 's/"ti,omap36xx"/"ti,omap3630", "ti,omap36xx"/' {} \; find arch/arm/boot/dts \( -name 'omap*.dts*' -o -name 'logic*.dts*' \) -exec fgrep -q '"ti,omap3"' {} \; ! -exec fgrep -q '"ti,omap3630"' {} \; ! -exec fgrep -q '"ti,omap36xx"' {} \; ! -exec fgrep -q '"ti,am3517"' {} \; ! -exec fgrep -q '"ti,omap34xx"' {} \; ! -exec fgrep -q '"ti,omap3430"' {} \; -exec sed -i '' 's/"ti,omap3"/"ti,omap3430", "ti,omap3"/' {} \; So if your out-of-tree omap3 board does not show any OPPs, please check the compatibility entry and update if needed. Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Acked-by: Tony Lindgren <tony@atomide.com> Tested-by: Adam Ford <aford173@gmail.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-09-12 00:47:10 +07:00
compatible = "ti,omap3430-sdp", "ti,omap3430", "ti,omap3";
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x10000000>; /* 256 MB */
};
};
&i2c1 {
clock-frequency = <2600000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
&mmc1 {
vmmc-supply = <&vmmc1>;
vqmmc-supply = <&vsim>;
/*
* S6-3 must be in ON position for 8 bit mode to function
* Else, use 4 bit mode
*/
bus-width = <8>;
};
&mmc2 {
status = "disabled";
};
&mmc3 {
status = "disabled";
};
&gpmc {
ranges = <0 0 0x10000000 0x08000000>,
<1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */
<2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */
nor@0,0 {
compatible = "cfi-flash";
linux,mtd-name= "intel,pf48f6000m0y1be";
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x08000000>;
bank-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <186>;
gpmc,cs-wr-off-ns = <186>;
gpmc,adv-on-ns = <12>;
gpmc,adv-rd-off-ns = <48>;
gpmc,adv-wr-off-ns = <48>;
gpmc,oe-on-ns = <54>;
gpmc,oe-off-ns = <168>;
gpmc,we-on-ns = <54>;
gpmc,we-off-ns = <168>;
gpmc,rd-cycle-ns = <186>;
gpmc,wr-cycle-ns = <186>;
gpmc,access-ns = <114>;
gpmc,page-burst-access-ns = <6>;
gpmc,bus-turnaround-ns = <12>;
gpmc,cycle2cycle-delay-ns = <18>;
gpmc,wr-data-mux-bus-ns = <90>;
gpmc,wr-access-ns = <186>;
gpmc,cycle2cycle-samecsen;
gpmc,cycle2cycle-diffcsen;
partition@0 {
label = "bootloader-nor";
reg = <0 0x40000>;
};
partition@40000 {
label = "params-nor";
reg = <0x40000 0x40000>;
};
partition@80000 {
label = "kernel-nor";
reg = <0x80000 0x200000>;
};
partition@280000 {
label = "filesystem-nor";
reg = <0x240000 0x7d80000>;
};
};
nand@1,0 {
compatible = "ti,omap2-nand";
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
interrupt-parent = <&gpmc>;
interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
<1 IRQ_TYPE_NONE>; /* termcount */
linux,mtd-name= "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <36>;
gpmc,cs-wr-off-ns = <36>;
gpmc,adv-on-ns = <6>;
gpmc,adv-rd-off-ns = <24>;
gpmc,adv-wr-off-ns = <36>;
gpmc,oe-on-ns = <6>;
gpmc,oe-off-ns = <48>;
gpmc,we-on-ns = <6>;
gpmc,we-off-ns = <30>;
gpmc,rd-cycle-ns = <72>;
gpmc,wr-cycle-ns = <72>;
gpmc,access-ns = <54>;
gpmc,wr-access-ns = <30>;
partition@0 {
label = "xloader-nand";
reg = <0 0x80000>;
};
partition@80000 {
label = "bootloader-nand";
reg = <0x80000 0x140000>;
};
partition@1c0000 {
label = "params-nand";
reg = <0x1c0000 0xc0000>;
};
partition@280000 {
label = "kernel-nand";
reg = <0x280000 0x500000>;
};
partition@780000 {
label = "filesystem-nand";
reg = <0x780000 0x7880000>;
};
};
onenand@2,0 {
linux,mtd-name= "samsung,kfm2g16q2m-deb8";
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,omap2-onenand";
reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <84>;
gpmc,cs-wr-off-ns = <72>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <18>;
gpmc,adv-wr-off-ns = <18>;
gpmc,oe-on-ns = <30>;
gpmc,oe-off-ns = <84>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <42>;
gpmc,rd-cycle-ns = <108>;
gpmc,wr-cycle-ns = <96>;
gpmc,access-ns = <78>;
gpmc,wr-data-mux-bus-ns = <30>;
partition@0 {
label = "xloader-onenand";
reg = <0 0x80000>;
};
partition@80000 {
label = "bootloader-onenand";
reg = <0x80000 0x40000>;
};
partition@c0000 {
label = "params-onenand";
reg = <0xc0000 0x20000>;
};
partition@e0000 {
label = "kernel-onenand";
reg = <0xe0000 0x200000>;
};
partition@2e0000 {
label = "filesystem-onenand";
reg = <0x2e0000 0xfd20000>;
};
};
};