linux_dsm_epyc7002/drivers/net/ethernet/sfc/mcdi_port.c

707 lines
19 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/****************************************************************************
* Driver for Solarflare network controllers and boards
* Copyright 2009-2013 Solarflare Communications Inc.
*/
/*
* Driver for PHY related operations via MCDI.
*/
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include "efx.h"
#include "mcdi_port.h"
#include "mcdi.h"
#include "mcdi_pcol.h"
#include "nic.h"
#include "selftest.h"
#include "mcdi_port_common.h"
static int efx_mcdi_mdio_read(struct net_device *net_dev,
int prtad, int devad, u16 addr)
{
struct efx_nic *efx = netdev_priv(net_dev);
MCDI_DECLARE_BUF(inbuf, MC_CMD_MDIO_READ_IN_LEN);
MCDI_DECLARE_BUF(outbuf, MC_CMD_MDIO_READ_OUT_LEN);
size_t outlen;
int rc;
MCDI_SET_DWORD(inbuf, MDIO_READ_IN_BUS, efx->mdio_bus);
MCDI_SET_DWORD(inbuf, MDIO_READ_IN_PRTAD, prtad);
MCDI_SET_DWORD(inbuf, MDIO_READ_IN_DEVAD, devad);
MCDI_SET_DWORD(inbuf, MDIO_READ_IN_ADDR, addr);
rc = efx_mcdi_rpc(efx, MC_CMD_MDIO_READ, inbuf, sizeof(inbuf),
outbuf, sizeof(outbuf), &outlen);
if (rc)
return rc;
if (MCDI_DWORD(outbuf, MDIO_READ_OUT_STATUS) !=
MC_CMD_MDIO_STATUS_GOOD)
return -EIO;
return (u16)MCDI_DWORD(outbuf, MDIO_READ_OUT_VALUE);
}
static int efx_mcdi_mdio_write(struct net_device *net_dev,
int prtad, int devad, u16 addr, u16 value)
{
struct efx_nic *efx = netdev_priv(net_dev);
MCDI_DECLARE_BUF(inbuf, MC_CMD_MDIO_WRITE_IN_LEN);
MCDI_DECLARE_BUF(outbuf, MC_CMD_MDIO_WRITE_OUT_LEN);
size_t outlen;
int rc;
MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_BUS, efx->mdio_bus);
MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_PRTAD, prtad);
MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_DEVAD, devad);
MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_ADDR, addr);
MCDI_SET_DWORD(inbuf, MDIO_WRITE_IN_VALUE, value);
rc = efx_mcdi_rpc(efx, MC_CMD_MDIO_WRITE, inbuf, sizeof(inbuf),
outbuf, sizeof(outbuf), &outlen);
if (rc)
return rc;
if (MCDI_DWORD(outbuf, MDIO_WRITE_OUT_STATUS) !=
MC_CMD_MDIO_STATUS_GOOD)
return -EIO;
return 0;
}
static int efx_mcdi_phy_probe(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data;
MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN);
u32 caps;
int rc;
/* Initialise and populate phy_data */
phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL);
if (phy_data == NULL)
return -ENOMEM;
rc = efx_mcdi_get_phy_cfg(efx, phy_data);
if (rc != 0)
goto fail;
/* Read initial link advertisement */
BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
outbuf, sizeof(outbuf), NULL);
if (rc)
goto fail;
/* Fill out nic state */
efx->phy_data = phy_data;
efx->phy_type = phy_data->type;
efx->mdio_bus = phy_data->channel;
efx->mdio.prtad = phy_data->port;
efx->mdio.mmds = phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22);
efx->mdio.mode_support = 0;
if (phy_data->mmd_mask & (1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C22;
if (phy_data->mmd_mask & ~(1 << MC_CMD_MMD_CLAUSE22))
efx->mdio.mode_support |= MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
caps = MCDI_DWORD(outbuf, GET_LINK_OUT_CAP);
if (caps & (1 << MC_CMD_PHY_CAP_AN_LBN))
mcdi_to_ethtool_linkset(phy_data->media, caps,
efx->link_advertising);
else
phy_data->forced_cap = caps;
/* Assert that we can map efx -> mcdi loopback modes */
BUILD_BUG_ON(LOOPBACK_NONE != MC_CMD_LOOPBACK_NONE);
BUILD_BUG_ON(LOOPBACK_DATA != MC_CMD_LOOPBACK_DATA);
BUILD_BUG_ON(LOOPBACK_GMAC != MC_CMD_LOOPBACK_GMAC);
BUILD_BUG_ON(LOOPBACK_XGMII != MC_CMD_LOOPBACK_XGMII);
BUILD_BUG_ON(LOOPBACK_XGXS != MC_CMD_LOOPBACK_XGXS);
BUILD_BUG_ON(LOOPBACK_XAUI != MC_CMD_LOOPBACK_XAUI);
BUILD_BUG_ON(LOOPBACK_GMII != MC_CMD_LOOPBACK_GMII);
BUILD_BUG_ON(LOOPBACK_SGMII != MC_CMD_LOOPBACK_SGMII);
BUILD_BUG_ON(LOOPBACK_XGBR != MC_CMD_LOOPBACK_XGBR);
BUILD_BUG_ON(LOOPBACK_XFI != MC_CMD_LOOPBACK_XFI);
BUILD_BUG_ON(LOOPBACK_XAUI_FAR != MC_CMD_LOOPBACK_XAUI_FAR);
BUILD_BUG_ON(LOOPBACK_GMII_FAR != MC_CMD_LOOPBACK_GMII_FAR);
BUILD_BUG_ON(LOOPBACK_SGMII_FAR != MC_CMD_LOOPBACK_SGMII_FAR);
BUILD_BUG_ON(LOOPBACK_XFI_FAR != MC_CMD_LOOPBACK_XFI_FAR);
BUILD_BUG_ON(LOOPBACK_GPHY != MC_CMD_LOOPBACK_GPHY);
BUILD_BUG_ON(LOOPBACK_PHYXS != MC_CMD_LOOPBACK_PHYXS);
BUILD_BUG_ON(LOOPBACK_PCS != MC_CMD_LOOPBACK_PCS);
BUILD_BUG_ON(LOOPBACK_PMAPMD != MC_CMD_LOOPBACK_PMAPMD);
BUILD_BUG_ON(LOOPBACK_XPORT != MC_CMD_LOOPBACK_XPORT);
BUILD_BUG_ON(LOOPBACK_XGMII_WS != MC_CMD_LOOPBACK_XGMII_WS);
BUILD_BUG_ON(LOOPBACK_XAUI_WS != MC_CMD_LOOPBACK_XAUI_WS);
BUILD_BUG_ON(LOOPBACK_XAUI_WS_FAR != MC_CMD_LOOPBACK_XAUI_WS_FAR);
BUILD_BUG_ON(LOOPBACK_XAUI_WS_NEAR != MC_CMD_LOOPBACK_XAUI_WS_NEAR);
BUILD_BUG_ON(LOOPBACK_GMII_WS != MC_CMD_LOOPBACK_GMII_WS);
BUILD_BUG_ON(LOOPBACK_XFI_WS != MC_CMD_LOOPBACK_XFI_WS);
BUILD_BUG_ON(LOOPBACK_XFI_WS_FAR != MC_CMD_LOOPBACK_XFI_WS_FAR);
BUILD_BUG_ON(LOOPBACK_PHYXS_WS != MC_CMD_LOOPBACK_PHYXS_WS);
rc = efx_mcdi_loopback_modes(efx, &efx->loopback_modes);
if (rc != 0)
goto fail;
/* The MC indicates that LOOPBACK_NONE is a valid loopback mode,
* but by convention we don't */
efx->loopback_modes &= ~(1 << LOOPBACK_NONE);
/* Set the initial link mode */
efx_mcdi_phy_decode_link(
efx, &efx->link_state,
MCDI_DWORD(outbuf, GET_LINK_OUT_LINK_SPEED),
MCDI_DWORD(outbuf, GET_LINK_OUT_FLAGS),
MCDI_DWORD(outbuf, GET_LINK_OUT_FCNTL));
/* Record the initial FEC configuration (or nearest approximation
* representable in the ethtool configuration space)
*/
efx->fec_config = mcdi_fec_caps_to_ethtool(caps,
efx->link_state.speed == 25000 ||
efx->link_state.speed == 50000);
/* Default to Autonegotiated flow control if the PHY supports it */
efx->wanted_fc = EFX_FC_RX | EFX_FC_TX;
if (phy_data->supported_cap & (1 << MC_CMD_PHY_CAP_AN_LBN))
efx->wanted_fc |= EFX_FC_AUTO;
efx_link_set_wanted_fc(efx, efx->wanted_fc);
return 0;
fail:
kfree(phy_data);
return rc;
}
static void efx_mcdi_phy_remove(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data = efx->phy_data;
efx->phy_data = NULL;
kfree(phy_data);
}
static void efx_mcdi_phy_get_link_ksettings(struct efx_nic *efx,
struct ethtool_link_ksettings *cmd)
{
struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN);
int rc;
cmd->base.speed = efx->link_state.speed;
cmd->base.duplex = efx->link_state.fd;
cmd->base.port = mcdi_to_ethtool_media(phy_cfg->media);
cmd->base.phy_address = phy_cfg->port;
cmd->base.autoneg = !!(efx->link_advertising[0] & ADVERTISED_Autoneg);
cmd->base.mdio_support = (efx->mdio.mode_support &
(MDIO_SUPPORTS_C45 | MDIO_SUPPORTS_C22));
mcdi_to_ethtool_linkset(phy_cfg->media, phy_cfg->supported_cap,
cmd->link_modes.supported);
memcpy(cmd->link_modes.advertising, efx->link_advertising,
sizeof(__ETHTOOL_DECLARE_LINK_MODE_MASK()));
BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
outbuf, sizeof(outbuf), NULL);
if (rc)
return;
mcdi_to_ethtool_linkset(phy_cfg->media,
MCDI_DWORD(outbuf, GET_LINK_OUT_LP_CAP),
cmd->link_modes.lp_advertising);
}
static int
efx_mcdi_phy_set_link_ksettings(struct efx_nic *efx,
const struct ethtool_link_ksettings *cmd)
{
struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
u32 caps;
int rc;
if (cmd->base.autoneg) {
caps = (ethtool_linkset_to_mcdi_cap(cmd->link_modes.advertising) |
1 << MC_CMD_PHY_CAP_AN_LBN);
} else if (cmd->base.duplex) {
switch (cmd->base.speed) {
case 10: caps = 1 << MC_CMD_PHY_CAP_10FDX_LBN; break;
case 100: caps = 1 << MC_CMD_PHY_CAP_100FDX_LBN; break;
case 1000: caps = 1 << MC_CMD_PHY_CAP_1000FDX_LBN; break;
case 10000: caps = 1 << MC_CMD_PHY_CAP_10000FDX_LBN; break;
case 40000: caps = 1 << MC_CMD_PHY_CAP_40000FDX_LBN; break;
case 100000: caps = 1 << MC_CMD_PHY_CAP_100000FDX_LBN; break;
case 25000: caps = 1 << MC_CMD_PHY_CAP_25000FDX_LBN; break;
case 50000: caps = 1 << MC_CMD_PHY_CAP_50000FDX_LBN; break;
default: return -EINVAL;
}
} else {
switch (cmd->base.speed) {
case 10: caps = 1 << MC_CMD_PHY_CAP_10HDX_LBN; break;
case 100: caps = 1 << MC_CMD_PHY_CAP_100HDX_LBN; break;
case 1000: caps = 1 << MC_CMD_PHY_CAP_1000HDX_LBN; break;
default: return -EINVAL;
}
}
caps |= ethtool_fec_caps_to_mcdi(efx->fec_config);
rc = efx_mcdi_set_link(efx, caps, efx_get_mcdi_phy_flags(efx),
efx->loopback_mode, 0);
if (rc)
return rc;
if (cmd->base.autoneg) {
efx_link_set_advertising(efx, cmd->link_modes.advertising);
phy_cfg->forced_cap = 0;
} else {
efx_link_clear_advertising(efx);
phy_cfg->forced_cap = caps;
}
return 0;
}
static int efx_mcdi_phy_set_fecparam(struct efx_nic *efx,
const struct ethtool_fecparam *fec)
{
struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
u32 caps;
int rc;
/* Work out what efx_mcdi_phy_set_link_ksettings() would produce from
* saved advertising bits
*/
if (test_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, efx->link_advertising))
caps = (ethtool_linkset_to_mcdi_cap(efx->link_advertising) |
1 << MC_CMD_PHY_CAP_AN_LBN);
else
caps = phy_cfg->forced_cap;
caps |= ethtool_fec_caps_to_mcdi(fec->fec);
rc = efx_mcdi_set_link(efx, caps, efx_get_mcdi_phy_flags(efx),
efx->loopback_mode, 0);
if (rc)
return rc;
/* Record the new FEC setting for subsequent set_link calls */
efx->fec_config = fec->fec;
return 0;
}
static const char *const mcdi_sft9001_cable_diag_names[] = {
"cable.pairA.length",
"cable.pairB.length",
"cable.pairC.length",
"cable.pairD.length",
"cable.pairA.status",
"cable.pairB.status",
"cable.pairC.status",
"cable.pairD.status",
};
static int efx_mcdi_bist(struct efx_nic *efx, unsigned int bist_mode,
int *results)
{
unsigned int retry, i, count = 0;
size_t outlen;
u32 status;
MCDI_DECLARE_BUF(inbuf, MC_CMD_START_BIST_IN_LEN);
MCDI_DECLARE_BUF(outbuf, MC_CMD_POLL_BIST_OUT_SFT9001_LEN);
u8 *ptr;
int rc;
BUILD_BUG_ON(MC_CMD_START_BIST_OUT_LEN != 0);
MCDI_SET_DWORD(inbuf, START_BIST_IN_TYPE, bist_mode);
rc = efx_mcdi_rpc(efx, MC_CMD_START_BIST,
inbuf, MC_CMD_START_BIST_IN_LEN, NULL, 0, NULL);
if (rc)
goto out;
/* Wait up to 10s for BIST to finish */
for (retry = 0; retry < 100; ++retry) {
BUILD_BUG_ON(MC_CMD_POLL_BIST_IN_LEN != 0);
rc = efx_mcdi_rpc(efx, MC_CMD_POLL_BIST, NULL, 0,
outbuf, sizeof(outbuf), &outlen);
if (rc)
goto out;
status = MCDI_DWORD(outbuf, POLL_BIST_OUT_RESULT);
if (status != MC_CMD_POLL_BIST_RUNNING)
goto finished;
msleep(100);
}
rc = -ETIMEDOUT;
goto out;
finished:
results[count++] = (status == MC_CMD_POLL_BIST_PASSED) ? 1 : -1;
/* SFT9001 specific cable diagnostics output */
if (efx->phy_type == PHY_TYPE_SFT9001B &&
(bist_mode == MC_CMD_PHY_BIST_CABLE_SHORT ||
bist_mode == MC_CMD_PHY_BIST_CABLE_LONG)) {
ptr = MCDI_PTR(outbuf, POLL_BIST_OUT_SFT9001_CABLE_LENGTH_A);
if (status == MC_CMD_POLL_BIST_PASSED &&
outlen >= MC_CMD_POLL_BIST_OUT_SFT9001_LEN) {
for (i = 0; i < 8; i++) {
results[count + i] =
EFX_DWORD_FIELD(((efx_dword_t *)ptr)[i],
EFX_DWORD_0);
}
}
count += 8;
}
rc = count;
out:
return rc;
}
static int efx_mcdi_phy_run_tests(struct efx_nic *efx, int *results,
unsigned flags)
{
struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
u32 mode;
int rc;
if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_LBN)) {
rc = efx_mcdi_bist(efx, MC_CMD_PHY_BIST, results);
if (rc < 0)
return rc;
results += rc;
}
/* If we support both LONG and SHORT, then run each in response to
* break or not. Otherwise, run the one we support */
mode = 0;
if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_SHORT_LBN)) {
if ((flags & ETH_TEST_FL_OFFLINE) &&
(phy_cfg->flags &
(1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN)))
mode = MC_CMD_PHY_BIST_CABLE_LONG;
else
mode = MC_CMD_PHY_BIST_CABLE_SHORT;
} else if (phy_cfg->flags &
(1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN))
mode = MC_CMD_PHY_BIST_CABLE_LONG;
if (mode != 0) {
rc = efx_mcdi_bist(efx, mode, results);
if (rc < 0)
return rc;
results += rc;
}
return 0;
}
static const char *efx_mcdi_phy_test_name(struct efx_nic *efx,
unsigned int index)
{
struct efx_mcdi_phy_data *phy_cfg = efx->phy_data;
if (phy_cfg->flags & (1 << MC_CMD_GET_PHY_CFG_OUT_BIST_LBN)) {
if (index == 0)
return "bist";
--index;
}
if (phy_cfg->flags & ((1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_SHORT_LBN) |
(1 << MC_CMD_GET_PHY_CFG_OUT_BIST_CABLE_LONG_LBN))) {
if (index == 0)
return "cable";
--index;
if (efx->phy_type == PHY_TYPE_SFT9001B) {
if (index < ARRAY_SIZE(mcdi_sft9001_cable_diag_names))
return mcdi_sft9001_cable_diag_names[index];
index -= ARRAY_SIZE(mcdi_sft9001_cable_diag_names);
}
}
return NULL;
}
#define SFP_PAGE_SIZE 128
#define SFF_DIAG_TYPE_OFFSET 92
#define SFF_DIAG_ADDR_CHANGE BIT(2)
#define SFF_8079_NUM_PAGES 2
#define SFF_8472_NUM_PAGES 4
#define SFF_8436_NUM_PAGES 5
#define SFF_DMT_LEVEL_OFFSET 94
/** efx_mcdi_phy_get_module_eeprom_page() - Get a single page of module eeprom
* @efx: NIC context
* @page: EEPROM page number
* @data: Destination data pointer
* @offset: Offset in page to copy from in to data
* @space: Space available in data
*
* Return:
* >=0 - amount of data copied
* <0 - error
*/
static int efx_mcdi_phy_get_module_eeprom_page(struct efx_nic *efx,
unsigned int page,
u8 *data, ssize_t offset,
ssize_t space)
{
MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMAX);
MCDI_DECLARE_BUF(inbuf, MC_CMD_GET_PHY_MEDIA_INFO_IN_LEN);
size_t outlen;
unsigned int payload_len;
unsigned int to_copy;
int rc;
if (offset > SFP_PAGE_SIZE)
return -EINVAL;
to_copy = min(space, SFP_PAGE_SIZE - offset);
MCDI_SET_DWORD(inbuf, GET_PHY_MEDIA_INFO_IN_PAGE, page);
rc = efx_mcdi_rpc_quiet(efx, MC_CMD_GET_PHY_MEDIA_INFO,
inbuf, sizeof(inbuf),
outbuf, sizeof(outbuf),
&outlen);
if (rc)
return rc;
if (outlen < (MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_OFST +
SFP_PAGE_SIZE))
return -EIO;
payload_len = MCDI_DWORD(outbuf, GET_PHY_MEDIA_INFO_OUT_DATALEN);
if (payload_len != SFP_PAGE_SIZE)
return -EIO;
memcpy(data, MCDI_PTR(outbuf, GET_PHY_MEDIA_INFO_OUT_DATA) + offset,
to_copy);
return to_copy;
}
static int efx_mcdi_phy_get_module_eeprom_byte(struct efx_nic *efx,
unsigned int page,
u8 byte)
{
int rc;
u8 data;
rc = efx_mcdi_phy_get_module_eeprom_page(efx, page, &data, byte, 1);
if (rc == 1)
return data;
return rc;
}
static int efx_mcdi_phy_diag_type(struct efx_nic *efx)
{
/* Page zero of the EEPROM includes the diagnostic type at byte 92. */
return efx_mcdi_phy_get_module_eeprom_byte(efx, 0,
SFF_DIAG_TYPE_OFFSET);
}
static int efx_mcdi_phy_sff_8472_level(struct efx_nic *efx)
{
/* Page zero of the EEPROM includes the DMT level at byte 94. */
return efx_mcdi_phy_get_module_eeprom_byte(efx, 0,
SFF_DMT_LEVEL_OFFSET);
}
static u32 efx_mcdi_phy_module_type(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data = efx->phy_data;
if (phy_data->media != MC_CMD_MEDIA_QSFP_PLUS)
return phy_data->media;
/* A QSFP+ NIC may actually have an SFP+ module attached.
* The ID is page 0, byte 0.
*/
switch (efx_mcdi_phy_get_module_eeprom_byte(efx, 0, 0)) {
case 0x3:
return MC_CMD_MEDIA_SFP_PLUS;
case 0xc:
case 0xd:
return MC_CMD_MEDIA_QSFP_PLUS;
default:
return 0;
}
}
static int efx_mcdi_phy_get_module_eeprom(struct efx_nic *efx,
struct ethtool_eeprom *ee, u8 *data)
{
int rc;
ssize_t space_remaining = ee->len;
unsigned int page_off;
bool ignore_missing;
int num_pages;
int page;
switch (efx_mcdi_phy_module_type(efx)) {
case MC_CMD_MEDIA_SFP_PLUS:
num_pages = efx_mcdi_phy_sff_8472_level(efx) > 0 ?
SFF_8472_NUM_PAGES : SFF_8079_NUM_PAGES;
page = 0;
ignore_missing = false;
break;
case MC_CMD_MEDIA_QSFP_PLUS:
num_pages = SFF_8436_NUM_PAGES;
page = -1; /* We obtain the lower page by asking for -1. */
ignore_missing = true; /* Ignore missing pages after page 0. */
break;
default:
return -EOPNOTSUPP;
}
page_off = ee->offset % SFP_PAGE_SIZE;
page += ee->offset / SFP_PAGE_SIZE;
while (space_remaining && (page < num_pages)) {
rc = efx_mcdi_phy_get_module_eeprom_page(efx, page,
data, page_off,
space_remaining);
if (rc > 0) {
space_remaining -= rc;
data += rc;
page_off = 0;
page++;
} else if (rc == 0) {
space_remaining = 0;
} else if (ignore_missing && (page > 0)) {
int intended_size = SFP_PAGE_SIZE - page_off;
space_remaining -= intended_size;
if (space_remaining < 0) {
space_remaining = 0;
} else {
memset(data, 0, intended_size);
data += intended_size;
page_off = 0;
page++;
rc = 0;
}
} else {
return rc;
}
}
return 0;
}
static int efx_mcdi_phy_get_module_info(struct efx_nic *efx,
struct ethtool_modinfo *modinfo)
{
int sff_8472_level;
int diag_type;
switch (efx_mcdi_phy_module_type(efx)) {
case MC_CMD_MEDIA_SFP_PLUS:
sff_8472_level = efx_mcdi_phy_sff_8472_level(efx);
/* If we can't read the diagnostics level we have none. */
if (sff_8472_level < 0)
return -EOPNOTSUPP;
/* Check if this module requires the (unsupported) address
* change operation.
*/
diag_type = efx_mcdi_phy_diag_type(efx);
if ((sff_8472_level == 0) ||
(diag_type & SFF_DIAG_ADDR_CHANGE)) {
modinfo->type = ETH_MODULE_SFF_8079;
modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
} else {
modinfo->type = ETH_MODULE_SFF_8472;
modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
}
break;
case MC_CMD_MEDIA_QSFP_PLUS:
modinfo->type = ETH_MODULE_SFF_8436;
modinfo->eeprom_len = ETH_MODULE_SFF_8436_LEN;
break;
default:
return -EOPNOTSUPP;
}
return 0;
}
static const struct efx_phy_operations efx_mcdi_phy_ops = {
.probe = efx_mcdi_phy_probe,
.init = efx_port_dummy_op_int,
.reconfigure = efx_mcdi_port_reconfigure,
.poll = efx_mcdi_phy_poll,
.fini = efx_port_dummy_op_void,
.remove = efx_mcdi_phy_remove,
.get_link_ksettings = efx_mcdi_phy_get_link_ksettings,
.set_link_ksettings = efx_mcdi_phy_set_link_ksettings,
.get_fecparam = efx_mcdi_phy_get_fecparam,
.set_fecparam = efx_mcdi_phy_set_fecparam,
.test_alive = efx_mcdi_phy_test_alive,
.run_tests = efx_mcdi_phy_run_tests,
.test_name = efx_mcdi_phy_test_name,
.get_module_eeprom = efx_mcdi_phy_get_module_eeprom,
.get_module_info = efx_mcdi_phy_get_module_info,
};
u32 efx_mcdi_phy_get_caps(struct efx_nic *efx)
{
struct efx_mcdi_phy_data *phy_data = efx->phy_data;
return phy_data->supported_cap;
}
bool efx_mcdi_mac_check_fault(struct efx_nic *efx)
{
MCDI_DECLARE_BUF(outbuf, MC_CMD_GET_LINK_OUT_LEN);
size_t outlength;
int rc;
BUILD_BUG_ON(MC_CMD_GET_LINK_IN_LEN != 0);
rc = efx_mcdi_rpc(efx, MC_CMD_GET_LINK, NULL, 0,
outbuf, sizeof(outbuf), &outlength);
if (rc)
return true;
return MCDI_DWORD(outbuf, GET_LINK_OUT_MAC_FAULT) != 0;
}
int efx_mcdi_port_probe(struct efx_nic *efx)
{
int rc;
/* Hook in PHY operations table */
efx->phy_op = &efx_mcdi_phy_ops;
/* Set up MDIO structure for PHY */
efx->mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22;
efx->mdio.mdio_read = efx_mcdi_mdio_read;
efx->mdio.mdio_write = efx_mcdi_mdio_write;
/* Fill out MDIO structure, loopback modes, and initial link state */
rc = efx->phy_op->probe(efx);
if (rc != 0)
return rc;
return efx_mcdi_mac_init_stats(efx);
}
void efx_mcdi_port_remove(struct efx_nic *efx)
{
efx->phy_op->remove(efx);
efx_mcdi_mac_fini_stats(efx);
}