2013-12-13 13:41:49 +07:00
|
|
|
/*
|
|
|
|
* Driver for Atmel Pulse Width Modulation Controller
|
|
|
|
*
|
|
|
|
* Copyright (C) 2013 Atmel Corporation
|
|
|
|
* Bo Shen <voice.shen@atmel.com>
|
|
|
|
*
|
|
|
|
* Licensed under GPLv2.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/clk.h>
|
|
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/of.h>
|
|
|
|
#include <linux/of_device.h>
|
|
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/pwm.h>
|
|
|
|
#include <linux/slab.h>
|
|
|
|
|
|
|
|
/* The following is global registers for PWM controller */
|
|
|
|
#define PWM_ENA 0x04
|
|
|
|
#define PWM_DIS 0x08
|
|
|
|
#define PWM_SR 0x0C
|
|
|
|
/* Bit field in SR */
|
|
|
|
#define PWM_SR_ALL_CH_ON 0x0F
|
|
|
|
|
|
|
|
/* The following register is PWM channel related registers */
|
|
|
|
#define PWM_CH_REG_OFFSET 0x200
|
|
|
|
#define PWM_CH_REG_SIZE 0x20
|
|
|
|
|
|
|
|
#define PWM_CMR 0x0
|
|
|
|
/* Bit field in CMR */
|
|
|
|
#define PWM_CMR_CPOL (1 << 9)
|
|
|
|
#define PWM_CMR_UPD_CDTY (1 << 10)
|
2014-03-14 21:19:08 +07:00
|
|
|
#define PWM_CMR_CPRE_MSK 0xF
|
2013-12-13 13:41:49 +07:00
|
|
|
|
|
|
|
/* The following registers for PWM v1 */
|
|
|
|
#define PWMV1_CDTY 0x04
|
|
|
|
#define PWMV1_CPRD 0x08
|
|
|
|
#define PWMV1_CUPD 0x10
|
|
|
|
|
|
|
|
/* The following registers for PWM v2 */
|
|
|
|
#define PWMV2_CDTY 0x04
|
|
|
|
#define PWMV2_CDTYUPD 0x08
|
|
|
|
#define PWMV2_CPRD 0x0C
|
|
|
|
#define PWMV2_CPRDUPD 0x10
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Max value for duty and period
|
|
|
|
*
|
|
|
|
* Although the duty and period register is 32 bit,
|
|
|
|
* however only the LSB 16 bits are significant.
|
|
|
|
*/
|
|
|
|
#define PWM_MAX_DTY 0xFFFF
|
|
|
|
#define PWM_MAX_PRD 0xFFFF
|
|
|
|
#define PRD_MAX_PRES 10
|
|
|
|
|
|
|
|
struct atmel_pwm_chip {
|
|
|
|
struct pwm_chip chip;
|
|
|
|
struct clk *clk;
|
|
|
|
void __iomem *base;
|
|
|
|
|
|
|
|
void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
|
|
unsigned long dty, unsigned long prd);
|
|
|
|
};
|
|
|
|
|
|
|
|
static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
|
|
|
|
{
|
|
|
|
return container_of(chip, struct atmel_pwm_chip, chip);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 atmel_pwm_readl(struct atmel_pwm_chip *chip,
|
|
|
|
unsigned long offset)
|
|
|
|
{
|
|
|
|
return readl_relaxed(chip->base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void atmel_pwm_writel(struct atmel_pwm_chip *chip,
|
|
|
|
unsigned long offset, unsigned long val)
|
|
|
|
{
|
|
|
|
writel_relaxed(val, chip->base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline u32 atmel_pwm_ch_readl(struct atmel_pwm_chip *chip,
|
|
|
|
unsigned int ch, unsigned long offset)
|
|
|
|
{
|
|
|
|
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
|
|
|
|
|
|
|
|
return readl_relaxed(chip->base + base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
|
|
|
|
unsigned int ch, unsigned long offset,
|
|
|
|
unsigned long val)
|
|
|
|
{
|
|
|
|
unsigned long base = PWM_CH_REG_OFFSET + ch * PWM_CH_REG_SIZE;
|
|
|
|
|
|
|
|
writel_relaxed(val, chip->base + base + offset);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
|
|
int duty_ns, int period_ns)
|
|
|
|
{
|
|
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
|
|
unsigned long clk_rate, prd, dty;
|
|
|
|
unsigned long long div;
|
|
|
|
unsigned int pres = 0;
|
2014-03-14 21:19:08 +07:00
|
|
|
u32 val;
|
2013-12-13 13:41:49 +07:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) {
|
|
|
|
dev_err(chip->dev, "cannot change PWM period while enabled\n");
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
clk_rate = clk_get_rate(atmel_pwm->clk);
|
|
|
|
div = clk_rate;
|
|
|
|
|
|
|
|
/* Calculate the period cycles */
|
|
|
|
while (div > PWM_MAX_PRD) {
|
|
|
|
div = clk_rate / (1 << pres);
|
|
|
|
div = div * period_ns;
|
|
|
|
/* 1/Hz = 100000000 ns */
|
|
|
|
do_div(div, 1000000000);
|
|
|
|
|
|
|
|
if (pres++ > PRD_MAX_PRES) {
|
|
|
|
dev_err(chip->dev, "pres exceeds the maximum value\n");
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Calculate the duty cycles */
|
|
|
|
prd = div;
|
|
|
|
div *= duty_ns;
|
|
|
|
do_div(div, period_ns);
|
2014-03-14 21:19:09 +07:00
|
|
|
dty = prd - div;
|
2013-12-13 13:41:49 +07:00
|
|
|
|
|
|
|
ret = clk_enable(atmel_pwm->clk);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(chip->dev, "failed to enable PWM clock\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-03-14 21:19:08 +07:00
|
|
|
/* It is necessary to preserve CPOL, inside CMR */
|
|
|
|
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
|
|
|
|
val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK);
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
|
2013-12-13 13:41:49 +07:00
|
|
|
atmel_pwm->config(chip, pwm, dty, prd);
|
|
|
|
|
|
|
|
clk_disable(atmel_pwm->clk);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void atmel_pwm_config_v1(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
|
|
unsigned long dty, unsigned long prd)
|
|
|
|
{
|
|
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
|
|
unsigned int val;
|
|
|
|
|
|
|
|
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
|
|
|
|
/*
|
|
|
|
* If the PWM channel is enabled, using the update register,
|
|
|
|
* it needs to set bit 10 of CMR to 0
|
|
|
|
*/
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CUPD, dty);
|
|
|
|
|
|
|
|
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
|
|
|
|
val &= ~PWM_CMR_UPD_CDTY;
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* If the PWM channel is disabled, write value to duty and
|
|
|
|
* period registers directly.
|
|
|
|
*/
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CDTY, dty);
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV1_CPRD, prd);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void atmel_pwm_config_v2(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
|
|
unsigned long dty, unsigned long prd)
|
|
|
|
{
|
|
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
|
|
|
|
|
|
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
|
|
|
|
/*
|
|
|
|
* If the PWM channel is enabled, using the duty update register
|
|
|
|
* to update the value.
|
|
|
|
*/
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTYUPD, dty);
|
|
|
|
} else {
|
|
|
|
/*
|
|
|
|
* If the PWM channel is disabled, write value to duty and
|
|
|
|
* period registers directly.
|
|
|
|
*/
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CDTY, dty);
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWMV2_CPRD, prd);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int atmel_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
|
|
enum pwm_polarity polarity)
|
|
|
|
{
|
|
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
|
|
u32 val;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR);
|
|
|
|
|
|
|
|
if (polarity == PWM_POLARITY_NORMAL)
|
|
|
|
val &= ~PWM_CMR_CPOL;
|
|
|
|
else
|
|
|
|
val |= PWM_CMR_CPOL;
|
|
|
|
|
|
|
|
ret = clk_enable(atmel_pwm->clk);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(chip->dev, "failed to enable PWM clock\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
|
|
|
|
|
|
|
|
clk_disable(atmel_pwm->clk);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int atmel_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
|
|
{
|
|
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = clk_enable(atmel_pwm->clk);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(chip->dev, "failed to enable PWM clock\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
|
|
|
|
{
|
|
|
|
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
|
|
|
|
|
|
|
|
atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
|
|
|
|
|
|
|
|
clk_disable(atmel_pwm->clk);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct pwm_ops atmel_pwm_ops = {
|
|
|
|
.config = atmel_pwm_config,
|
|
|
|
.set_polarity = atmel_pwm_set_polarity,
|
|
|
|
.enable = atmel_pwm_enable,
|
|
|
|
.disable = atmel_pwm_disable,
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct atmel_pwm_data {
|
|
|
|
void (*config)(struct pwm_chip *chip, struct pwm_device *pwm,
|
|
|
|
unsigned long dty, unsigned long prd);
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct atmel_pwm_data atmel_pwm_data_v1 = {
|
|
|
|
.config = atmel_pwm_config_v1,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct atmel_pwm_data atmel_pwm_data_v2 = {
|
|
|
|
.config = atmel_pwm_config_v2,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct platform_device_id atmel_pwm_devtypes[] = {
|
|
|
|
{
|
|
|
|
.name = "at91sam9rl-pwm",
|
|
|
|
.driver_data = (kernel_ulong_t)&atmel_pwm_data_v1,
|
|
|
|
}, {
|
|
|
|
.name = "sama5d3-pwm",
|
|
|
|
.driver_data = (kernel_ulong_t)&atmel_pwm_data_v2,
|
|
|
|
}, {
|
|
|
|
/* sentinel */
|
|
|
|
},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(platform, atmel_pwm_devtypes);
|
|
|
|
|
|
|
|
static const struct of_device_id atmel_pwm_dt_ids[] = {
|
|
|
|
{
|
|
|
|
.compatible = "atmel,at91sam9rl-pwm",
|
|
|
|
.data = &atmel_pwm_data_v1,
|
|
|
|
}, {
|
|
|
|
.compatible = "atmel,sama5d3-pwm",
|
|
|
|
.data = &atmel_pwm_data_v2,
|
|
|
|
}, {
|
|
|
|
/* sentinel */
|
|
|
|
},
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, atmel_pwm_dt_ids);
|
|
|
|
|
|
|
|
static inline const struct atmel_pwm_data *
|
|
|
|
atmel_pwm_get_driver_data(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
if (pdev->dev.of_node) {
|
|
|
|
const struct of_device_id *match;
|
|
|
|
|
|
|
|
match = of_match_device(atmel_pwm_dt_ids, &pdev->dev);
|
|
|
|
if (!match)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return match->data;
|
|
|
|
} else {
|
|
|
|
const struct platform_device_id *id;
|
|
|
|
|
|
|
|
id = platform_get_device_id(pdev);
|
|
|
|
|
|
|
|
return (struct atmel_pwm_data *)id->driver_data;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int atmel_pwm_probe(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
const struct atmel_pwm_data *data;
|
|
|
|
struct atmel_pwm_chip *atmel_pwm;
|
|
|
|
struct resource *res;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
data = atmel_pwm_get_driver_data(pdev);
|
|
|
|
if (!data)
|
|
|
|
return -ENODEV;
|
|
|
|
|
|
|
|
atmel_pwm = devm_kzalloc(&pdev->dev, sizeof(*atmel_pwm), GFP_KERNEL);
|
|
|
|
if (!atmel_pwm)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
|
|
atmel_pwm->base = devm_ioremap_resource(&pdev->dev, res);
|
|
|
|
if (IS_ERR(atmel_pwm->base))
|
|
|
|
return PTR_ERR(atmel_pwm->base);
|
|
|
|
|
|
|
|
atmel_pwm->clk = devm_clk_get(&pdev->dev, NULL);
|
|
|
|
if (IS_ERR(atmel_pwm->clk))
|
|
|
|
return PTR_ERR(atmel_pwm->clk);
|
|
|
|
|
|
|
|
ret = clk_prepare(atmel_pwm->clk);
|
|
|
|
if (ret) {
|
|
|
|
dev_err(&pdev->dev, "failed to prepare PWM clock\n");
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
atmel_pwm->chip.dev = &pdev->dev;
|
|
|
|
atmel_pwm->chip.ops = &atmel_pwm_ops;
|
|
|
|
|
|
|
|
if (pdev->dev.of_node) {
|
|
|
|
atmel_pwm->chip.of_xlate = of_pwm_xlate_with_flags;
|
|
|
|
atmel_pwm->chip.of_pwm_n_cells = 3;
|
|
|
|
}
|
|
|
|
|
|
|
|
atmel_pwm->chip.base = -1;
|
|
|
|
atmel_pwm->chip.npwm = 4;
|
|
|
|
atmel_pwm->config = data->config;
|
|
|
|
|
|
|
|
ret = pwmchip_add(&atmel_pwm->chip);
|
|
|
|
if (ret < 0) {
|
|
|
|
dev_err(&pdev->dev, "failed to add PWM chip %d\n", ret);
|
|
|
|
goto unprepare_clk;
|
|
|
|
}
|
|
|
|
|
|
|
|
platform_set_drvdata(pdev, atmel_pwm);
|
|
|
|
|
2013-12-19 10:42:22 +07:00
|
|
|
return ret;
|
|
|
|
|
2013-12-13 13:41:49 +07:00
|
|
|
unprepare_clk:
|
|
|
|
clk_unprepare(atmel_pwm->clk);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int atmel_pwm_remove(struct platform_device *pdev)
|
|
|
|
{
|
|
|
|
struct atmel_pwm_chip *atmel_pwm = platform_get_drvdata(pdev);
|
|
|
|
|
|
|
|
clk_unprepare(atmel_pwm->clk);
|
|
|
|
|
|
|
|
return pwmchip_remove(&atmel_pwm->chip);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct platform_driver atmel_pwm_driver = {
|
|
|
|
.driver = {
|
|
|
|
.name = "atmel-pwm",
|
|
|
|
.of_match_table = of_match_ptr(atmel_pwm_dt_ids),
|
|
|
|
},
|
|
|
|
.id_table = atmel_pwm_devtypes,
|
|
|
|
.probe = atmel_pwm_probe,
|
|
|
|
.remove = atmel_pwm_remove,
|
|
|
|
};
|
|
|
|
module_platform_driver(atmel_pwm_driver);
|
|
|
|
|
|
|
|
MODULE_ALIAS("platform:atmel-pwm");
|
|
|
|
MODULE_AUTHOR("Bo Shen <voice.shen@atmel.com>");
|
|
|
|
MODULE_DESCRIPTION("Atmel PWM driver");
|
|
|
|
MODULE_LICENSE("GPL v2");
|