linux_dsm_epyc7002/drivers/virtio/virtio_balloon.c

1165 lines
33 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Virtio balloon implementation, inspired by Dor Laor and Marcelo
* Tosatti's implementations.
*
* Copyright 2008 Rusty Russell IBM Corporation
*/
#include <linux/virtio.h>
#include <linux/virtio_balloon.h>
#include <linux/swap.h>
#include <linux/workqueue.h>
#include <linux/delay.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/module.h>
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
#include <linux/balloon_compaction.h>
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
#include <linux/oom.h>
#include <linux/wait.h>
#include <linux/mm.h>
#include <linux/mount.h>
#include <linux/magic.h>
#include <linux/pseudo_fs.h>
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
#include <linux/page_reporting.h>
/*
* Balloon device works in 4K page units. So each page is pointed to by
* multiple balloon pages. All memory counters in this driver are in balloon
* page units.
*/
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
#define VIRTIO_BALLOON_PAGES_PER_PAGE (unsigned)(PAGE_SIZE >> VIRTIO_BALLOON_PFN_SHIFT)
#define VIRTIO_BALLOON_ARRAY_PFNS_MAX 256
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
/* Maximum number of (4k) pages to deflate on OOM notifications. */
#define VIRTIO_BALLOON_OOM_NR_PAGES 256
#define VIRTIO_BALLOON_OOM_NOTIFY_PRIORITY 80
virtio_balloon: free some memory from balloon on OOM Excessive virtio_balloon inflation can cause invocation of OOM-killer, when Linux is under severe memory pressure. Various mechanisms are responsible for correct virtio_balloon memory management. Nevertheless it is often the case that these control tools does not have enough time to react on fast changing memory load. As a result OS runs out of memory and invokes OOM-killer. The balancing of memory by use of the virtio balloon should not cause the termination of processes while there are pages in the balloon. Now there is no way for virtio balloon driver to free some memory at the last moment before some process will be get killed by OOM-killer. This does not provide a security breach as balloon itself is running inside guest OS and is working in the cooperation with the host. Thus some improvements from guest side should be considered as normal. To solve the problem, introduce a virtio_balloon callback which is expected to be called from the oom notifier call chain in out_of_memory() function. If virtio balloon could release some memory, it will make the system to return and retry the allocation that forced the out of memory killer to run. Allocate virtio feature bit for this: it is not set by default, the the guest will not deflate virtio balloon on OOM without explicit permission from host. Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-10 06:06:29 +07:00
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
#define VIRTIO_BALLOON_FREE_PAGE_ALLOC_FLAG (__GFP_NORETRY | __GFP_NOWARN | \
__GFP_NOMEMALLOC)
/* The order of free page blocks to report to host */
#define VIRTIO_BALLOON_HINT_BLOCK_ORDER (MAX_ORDER - 1)
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
/* The size of a free page block in bytes */
#define VIRTIO_BALLOON_HINT_BLOCK_BYTES \
(1 << (VIRTIO_BALLOON_HINT_BLOCK_ORDER + PAGE_SHIFT))
#define VIRTIO_BALLOON_HINT_BLOCK_PAGES (1 << VIRTIO_BALLOON_HINT_BLOCK_ORDER)
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
#ifdef CONFIG_BALLOON_COMPACTION
static struct vfsmount *balloon_mnt;
#endif
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
enum virtio_balloon_vq {
VIRTIO_BALLOON_VQ_INFLATE,
VIRTIO_BALLOON_VQ_DEFLATE,
VIRTIO_BALLOON_VQ_STATS,
VIRTIO_BALLOON_VQ_FREE_PAGE,
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
VIRTIO_BALLOON_VQ_REPORTING,
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
VIRTIO_BALLOON_VQ_MAX
};
enum virtio_balloon_config_read {
VIRTIO_BALLOON_CONFIG_READ_CMD_ID = 0,
};
struct virtio_balloon {
struct virtio_device *vdev;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
struct virtqueue *inflate_vq, *deflate_vq, *stats_vq, *free_page_vq;
/* Balloon's own wq for cpu-intensive work items */
struct workqueue_struct *balloon_wq;
/* The free page reporting work item submitted to the balloon wq */
struct work_struct report_free_page_work;
/* The balloon servicing is delegated to a freezable workqueue. */
struct work_struct update_balloon_stats_work;
struct work_struct update_balloon_size_work;
/* Prevent updating balloon when it is being canceled. */
spinlock_t stop_update_lock;
bool stop_update;
/* Bitmap to indicate if reading the related config fields are needed */
unsigned long config_read_bitmap;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
/* The list of allocated free pages, waiting to be given back to mm */
struct list_head free_page_list;
spinlock_t free_page_list_lock;
/* The number of free page blocks on the above list */
unsigned long num_free_page_blocks;
/*
* The cmd id received from host.
* Read it via virtio_balloon_cmd_id_received to get the latest value
* sent from host.
*/
u32 cmd_id_received_cache;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
/* The cmd id that is actively in use */
__virtio32 cmd_id_active;
/* Buffer to store the stop sign */
__virtio32 cmd_id_stop;
/* Waiting for host to ack the pages we released. */
wait_queue_head_t acked;
/* Number of balloon pages we've told the Host we're not using. */
unsigned int num_pages;
/*
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
* The pages we've told the Host we're not using are enqueued
* at vb_dev_info->pages list.
* Each page on this list adds VIRTIO_BALLOON_PAGES_PER_PAGE
* to num_pages above.
*/
struct balloon_dev_info vb_dev_info;
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
/* Synchronize access/update to this struct virtio_balloon elements */
struct mutex balloon_lock;
/* The array of pfns we tell the Host about. */
unsigned int num_pfns;
__virtio32 pfns[VIRTIO_BALLOON_ARRAY_PFNS_MAX];
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
/* Memory statistics */
struct virtio_balloon_stat stats[VIRTIO_BALLOON_S_NR];
virtio_balloon: free some memory from balloon on OOM Excessive virtio_balloon inflation can cause invocation of OOM-killer, when Linux is under severe memory pressure. Various mechanisms are responsible for correct virtio_balloon memory management. Nevertheless it is often the case that these control tools does not have enough time to react on fast changing memory load. As a result OS runs out of memory and invokes OOM-killer. The balancing of memory by use of the virtio balloon should not cause the termination of processes while there are pages in the balloon. Now there is no way for virtio balloon driver to free some memory at the last moment before some process will be get killed by OOM-killer. This does not provide a security breach as balloon itself is running inside guest OS and is working in the cooperation with the host. Thus some improvements from guest side should be considered as normal. To solve the problem, introduce a virtio_balloon callback which is expected to be called from the oom notifier call chain in out_of_memory() function. If virtio balloon could release some memory, it will make the system to return and retry the allocation that forced the out of memory killer to run. Allocate virtio feature bit for this: it is not set by default, the the guest will not deflate virtio balloon on OOM without explicit permission from host. Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-10 06:06:29 +07:00
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
/* Shrinker to return free pages - VIRTIO_BALLOON_F_FREE_PAGE_HINT */
virtio_balloon: replace oom notifier with shrinker The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-16 14:50:58 +07:00
struct shrinker shrinker;
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
/* OOM notifier to deflate on OOM - VIRTIO_BALLOON_F_DEFLATE_ON_OOM */
struct notifier_block oom_nb;
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
/* Free page reporting device */
struct virtqueue *reporting_vq;
struct page_reporting_dev_info pr_dev_info;
};
static struct virtio_device_id id_table[] = {
{ VIRTIO_ID_BALLOON, VIRTIO_DEV_ANY_ID },
{ 0 },
};
static u32 page_to_balloon_pfn(struct page *page)
{
unsigned long pfn = page_to_pfn(page);
BUILD_BUG_ON(PAGE_SHIFT < VIRTIO_BALLOON_PFN_SHIFT);
/* Convert pfn from Linux page size to balloon page size. */
return pfn * VIRTIO_BALLOON_PAGES_PER_PAGE;
}
static void balloon_ack(struct virtqueue *vq)
{
struct virtio_balloon *vb = vq->vdev->priv;
wake_up(&vb->acked);
}
static void tell_host(struct virtio_balloon *vb, struct virtqueue *vq)
{
struct scatterlist sg;
unsigned int len;
sg_init_one(&sg, vb->pfns, sizeof(vb->pfns[0]) * vb->num_pfns);
/* We should always be able to add one buffer to an empty queue. */
virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
virtqueue_kick(vq);
/* When host has read buffer, this completes via balloon_ack */
wait_event(vb->acked, virtqueue_get_buf(vq, &len));
}
static int virtballoon_free_page_report(struct page_reporting_dev_info *pr_dev_info,
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
struct scatterlist *sg, unsigned int nents)
{
struct virtio_balloon *vb =
container_of(pr_dev_info, struct virtio_balloon, pr_dev_info);
struct virtqueue *vq = vb->reporting_vq;
unsigned int unused, err;
/* We should always be able to add these buffers to an empty queue. */
err = virtqueue_add_inbuf(vq, sg, nents, vb, GFP_NOWAIT | __GFP_NOWARN);
/*
* In the extremely unlikely case that something has occurred and we
* are able to trigger an error we will simply display a warning
* and exit without actually processing the pages.
*/
if (WARN_ON_ONCE(err))
return err;
virtqueue_kick(vq);
/* When host has read buffer, this completes via balloon_ack */
wait_event(vb->acked, virtqueue_get_buf(vq, &unused));
return 0;
}
static void set_page_pfns(struct virtio_balloon *vb,
__virtio32 pfns[], struct page *page)
{
unsigned int i;
BUILD_BUG_ON(VIRTIO_BALLOON_PAGES_PER_PAGE > VIRTIO_BALLOON_ARRAY_PFNS_MAX);
/*
* Set balloon pfns pointing at this page.
* Note that the first pfn points at start of the page.
*/
for (i = 0; i < VIRTIO_BALLOON_PAGES_PER_PAGE; i++)
pfns[i] = cpu_to_virtio32(vb->vdev,
page_to_balloon_pfn(page) + i);
}
static unsigned fill_balloon(struct virtio_balloon *vb, size_t num)
{
unsigned num_allocated_pages;
virtio_balloon: fix deadlock on OOM fill_balloon doing memory allocations under balloon_lock can cause a deadlock when leak_balloon is called from virtballoon_oom_notify and tries to take same lock. To fix, split page allocation and enqueue and do allocations outside the lock. Here's a detailed analysis of the deadlock by Tetsuo Handa: In leak_balloon(), mutex_lock(&vb->balloon_lock) is called in order to serialize against fill_balloon(). But in fill_balloon(), alloc_page(GFP_HIGHUSER[_MOVABLE] | __GFP_NOMEMALLOC | __GFP_NORETRY) is called with vb->balloon_lock mutex held. Since GFP_HIGHUSER[_MOVABLE] implies __GFP_DIRECT_RECLAIM | __GFP_IO | __GFP_FS, despite __GFP_NORETRY is specified, this allocation attempt might indirectly depend on somebody else's __GFP_DIRECT_RECLAIM memory allocation. And such indirect __GFP_DIRECT_RECLAIM memory allocation might call leak_balloon() via virtballoon_oom_notify() via blocking_notifier_call_chain() callback via out_of_memory() when it reached __alloc_pages_may_oom() and held oom_lock mutex. Since vb->balloon_lock mutex is already held by fill_balloon(), it will cause OOM lockup. Thread1 Thread2 fill_balloon() takes a balloon_lock balloon_page_enqueue() alloc_page(GFP_HIGHUSER_MOVABLE) direct reclaim (__GFP_FS context) takes a fs lock waits for that fs lock alloc_page(GFP_NOFS) __alloc_pages_may_oom() takes the oom_lock out_of_memory() blocking_notifier_call_chain() leak_balloon() tries to take that balloon_lock and deadlocks Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-13 20:11:48 +07:00
unsigned num_pfns;
struct page *page;
LIST_HEAD(pages);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
/* We can only do one array worth at a time. */
num = min(num, ARRAY_SIZE(vb->pfns));
virtio_balloon: fix deadlock on OOM fill_balloon doing memory allocations under balloon_lock can cause a deadlock when leak_balloon is called from virtballoon_oom_notify and tries to take same lock. To fix, split page allocation and enqueue and do allocations outside the lock. Here's a detailed analysis of the deadlock by Tetsuo Handa: In leak_balloon(), mutex_lock(&vb->balloon_lock) is called in order to serialize against fill_balloon(). But in fill_balloon(), alloc_page(GFP_HIGHUSER[_MOVABLE] | __GFP_NOMEMALLOC | __GFP_NORETRY) is called with vb->balloon_lock mutex held. Since GFP_HIGHUSER[_MOVABLE] implies __GFP_DIRECT_RECLAIM | __GFP_IO | __GFP_FS, despite __GFP_NORETRY is specified, this allocation attempt might indirectly depend on somebody else's __GFP_DIRECT_RECLAIM memory allocation. And such indirect __GFP_DIRECT_RECLAIM memory allocation might call leak_balloon() via virtballoon_oom_notify() via blocking_notifier_call_chain() callback via out_of_memory() when it reached __alloc_pages_may_oom() and held oom_lock mutex. Since vb->balloon_lock mutex is already held by fill_balloon(), it will cause OOM lockup. Thread1 Thread2 fill_balloon() takes a balloon_lock balloon_page_enqueue() alloc_page(GFP_HIGHUSER_MOVABLE) direct reclaim (__GFP_FS context) takes a fs lock waits for that fs lock alloc_page(GFP_NOFS) __alloc_pages_may_oom() takes the oom_lock out_of_memory() blocking_notifier_call_chain() leak_balloon() tries to take that balloon_lock and deadlocks Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-13 20:11:48 +07:00
for (num_pfns = 0; num_pfns < num;
num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
struct page *page = balloon_page_alloc();
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
if (!page) {
dev_info_ratelimited(&vb->vdev->dev,
Some nice cleanups, and even a patch my wife did as a "live" demo for Latinoware 2012. There's a slightly non-trivial merge in virtio-net, as we cleaned up the virtio add_buf interface while DaveM accepted the mq virtio-net patches. You can see my solution in my pending-rebases branch, if that helps, but I know you love merging: https://git.kernel.org/?p=linux/kernel/git/rusty/linux.git;a=commit;h=12e4e64fa66a4c812e4855de32abdb4d819526fe Cheers, Rusty. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQIcBAABAgAGBQJQz/vKAAoJENkgDmzRrbjx+eYQAK/egj9T8Nnth6mkzdbCFSO7 Bciga2hDiudGCiGojTRGPRSc0VP9LgfvPbY2pxX+R9CfEqR+a8q/rRQhCS79ZwPB /mJy3HNiCx418HZxgwNtk6vPe0PjJm6SsjbXeB9hB+PQLCbdwA0BjpG6xjF/jitP noPqhhXreeQgYVxAKoFPvff/Byu2GlNnDdVMQxWRmo8hTKlTCzl0T/7BHRxthhJj iOrXTFzrT/osPT0zyqlngT03T4wlBvL2Bfw8d/kuRPEZ71dpIctWeH2KzdwXVCrz hFQGxAz4OWvW3xrNwj7c6O3SWj4VemUMjQqeA/PtRiOEI5gM0Y/Bit47dWL4wM/O OWUKFHzq4DFs8MmwXBgDDXl5xOjOBH9Ik4FZayn3Y7COT/B8CjFdOC2MdDGmZ9yd NInumg7FqP+u12g+9Vq8S/b0cfoQm4qFe8VHiPJu+jRmCZglyvLjk7oq/QwW8Gaq Pkzit1Ey0DWo2KvZ4D/nuXJCuhmzN/AJ10M48lLYZhtOIVg9gsa0xjhfgq4FnvSK xFCf3rcWnlGIXcOYh/hKU25WaCLzBuqMuSK35A72IujrQOL7OJTk4Oqote3Z3H9B 08XJmyW6SOZdfw17X4Im1jbyuLek///xQJ9Jw/tya7j9lBt8zjJ+FmLPs4mLGEOm WJv9uZPs+QbIMNky2Lcb =myDR -----END PGP SIGNATURE----- Merge tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux Pull virtio update from Rusty Russell: "Some nice cleanups, and even a patch my wife did as a "live" demo for Latinoware 2012. There's a slightly non-trivial merge in virtio-net, as we cleaned up the virtio add_buf interface while DaveM accepted the mq virtio-net patches." * tag 'virtio-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (27 commits) virtio_console: Add support for remoteproc serial virtio_console: Merge struct buffer_token into struct port_buffer virtio: add drv_to_virtio to make code clearly virtio: use dev_to_virtio wrapper in virtio virtio-mmio: Fix irq parsing in command line parameter virtio_console: Free buffers from out-queue upon close virtio: Convert dev_printk(KERN_<LEVEL> to dev_<level>( virtio_console: Use kmalloc instead of kzalloc virtio_console: Free buffer if splice fails virtio: tools: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: scsi: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: rpmsg: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: net: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: console: make it clear that virtqueue_add_buf() no longer returns > 0 virtio: make virtqueue_add_buf() returning 0 on success, not capacity. virtio: console: don't rely on virtqueue_add_buf() returning capacity. virtio_net: don't rely on virtqueue_add_buf() returning capacity. virtio-net: remove unused skb_vnet_hdr->num_sg field virtio-net: correct capacity math on ring full virtio: move queue_index and num_free fields into core struct virtqueue. ...
2012-12-20 23:37:04 +07:00
"Out of puff! Can't get %u pages\n",
VIRTIO_BALLOON_PAGES_PER_PAGE);
/* Sleep for at least 1/5 of a second before retry. */
msleep(200);
break;
}
virtio_balloon: fix deadlock on OOM fill_balloon doing memory allocations under balloon_lock can cause a deadlock when leak_balloon is called from virtballoon_oom_notify and tries to take same lock. To fix, split page allocation and enqueue and do allocations outside the lock. Here's a detailed analysis of the deadlock by Tetsuo Handa: In leak_balloon(), mutex_lock(&vb->balloon_lock) is called in order to serialize against fill_balloon(). But in fill_balloon(), alloc_page(GFP_HIGHUSER[_MOVABLE] | __GFP_NOMEMALLOC | __GFP_NORETRY) is called with vb->balloon_lock mutex held. Since GFP_HIGHUSER[_MOVABLE] implies __GFP_DIRECT_RECLAIM | __GFP_IO | __GFP_FS, despite __GFP_NORETRY is specified, this allocation attempt might indirectly depend on somebody else's __GFP_DIRECT_RECLAIM memory allocation. And such indirect __GFP_DIRECT_RECLAIM memory allocation might call leak_balloon() via virtballoon_oom_notify() via blocking_notifier_call_chain() callback via out_of_memory() when it reached __alloc_pages_may_oom() and held oom_lock mutex. Since vb->balloon_lock mutex is already held by fill_balloon(), it will cause OOM lockup. Thread1 Thread2 fill_balloon() takes a balloon_lock balloon_page_enqueue() alloc_page(GFP_HIGHUSER_MOVABLE) direct reclaim (__GFP_FS context) takes a fs lock waits for that fs lock alloc_page(GFP_NOFS) __alloc_pages_may_oom() takes the oom_lock out_of_memory() blocking_notifier_call_chain() leak_balloon() tries to take that balloon_lock and deadlocks Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-10-13 20:11:48 +07:00
balloon_page_push(&pages, page);
}
mutex_lock(&vb->balloon_lock);
vb->num_pfns = 0;
while ((page = balloon_page_pop(&pages))) {
balloon_page_enqueue(&vb->vb_dev_info, page);
set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
vb->num_pages += VIRTIO_BALLOON_PAGES_PER_PAGE;
if (!virtio_has_feature(vb->vdev,
VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
adjust_managed_page_count(page, -1);
vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE;
}
num_allocated_pages = vb->num_pfns;
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
/* Did we get any? */
if (vb->num_pfns != 0)
tell_host(vb, vb->inflate_vq);
mutex_unlock(&vb->balloon_lock);
return num_allocated_pages;
}
static void release_pages_balloon(struct virtio_balloon *vb,
struct list_head *pages)
{
struct page *page, *next;
list_for_each_entry_safe(page, next, pages, lru) {
if (!virtio_has_feature(vb->vdev,
VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
adjust_managed_page_count(page, 1);
list_del(&page->lru);
mm/balloon_compaction: redesign ballooned pages management Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:29:27 +07:00
put_page(page); /* balloon reference */
}
}
static unsigned leak_balloon(struct virtio_balloon *vb, size_t num)
{
unsigned num_freed_pages;
struct page *page;
struct balloon_dev_info *vb_dev_info = &vb->vb_dev_info;
LIST_HEAD(pages);
/* We can only do one array worth at a time. */
num = min(num, ARRAY_SIZE(vb->pfns));
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
mutex_lock(&vb->balloon_lock);
/* We can't release more pages than taken */
num = min(num, (size_t)vb->num_pages);
for (vb->num_pfns = 0; vb->num_pfns < num;
vb->num_pfns += VIRTIO_BALLOON_PAGES_PER_PAGE) {
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
page = balloon_page_dequeue(vb_dev_info);
if (!page)
break;
set_page_pfns(vb, vb->pfns + vb->num_pfns, page);
list_add(&page->lru, &pages);
vb->num_pages -= VIRTIO_BALLOON_PAGES_PER_PAGE;
}
num_freed_pages = vb->num_pfns;
/*
* Note that if
* virtio_has_feature(vdev, VIRTIO_BALLOON_F_MUST_TELL_HOST);
* is true, we *have* to do it in this order
*/
if (vb->num_pfns != 0)
tell_host(vb, vb->deflate_vq);
release_pages_balloon(vb, &pages);
mutex_unlock(&vb->balloon_lock);
return num_freed_pages;
}
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
static inline void update_stat(struct virtio_balloon *vb, int idx,
u16 tag, u64 val)
{
BUG_ON(idx >= VIRTIO_BALLOON_S_NR);
vb->stats[idx].tag = cpu_to_virtio16(vb->vdev, tag);
vb->stats[idx].val = cpu_to_virtio64(vb->vdev, val);
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
}
#define pages_to_bytes(x) ((u64)(x) << PAGE_SHIFT)
static unsigned int update_balloon_stats(struct virtio_balloon *vb)
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
{
unsigned long events[NR_VM_EVENT_ITEMS];
struct sysinfo i;
unsigned int idx = 0;
long available;
unsigned long caches;
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
all_vm_events(events);
si_meminfo(&i);
available = si_mem_available();
caches = global_node_page_state(NR_FILE_PAGES);
#ifdef CONFIG_VM_EVENT_COUNTERS
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_IN,
pages_to_bytes(events[PSWPIN]));
update_stat(vb, idx++, VIRTIO_BALLOON_S_SWAP_OUT,
pages_to_bytes(events[PSWPOUT]));
update_stat(vb, idx++, VIRTIO_BALLOON_S_MAJFLT, events[PGMAJFAULT]);
update_stat(vb, idx++, VIRTIO_BALLOON_S_MINFLT, events[PGFAULT]);
#ifdef CONFIG_HUGETLB_PAGE
update_stat(vb, idx++, VIRTIO_BALLOON_S_HTLB_PGALLOC,
events[HTLB_BUDDY_PGALLOC]);
update_stat(vb, idx++, VIRTIO_BALLOON_S_HTLB_PGFAIL,
events[HTLB_BUDDY_PGALLOC_FAIL]);
#endif
#endif
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMFREE,
pages_to_bytes(i.freeram));
update_stat(vb, idx++, VIRTIO_BALLOON_S_MEMTOT,
pages_to_bytes(i.totalram));
update_stat(vb, idx++, VIRTIO_BALLOON_S_AVAIL,
pages_to_bytes(available));
update_stat(vb, idx++, VIRTIO_BALLOON_S_CACHES,
pages_to_bytes(caches));
return idx;
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
}
/*
* While most virtqueues communicate guest-initiated requests to the hypervisor,
* the stats queue operates in reverse. The driver initializes the virtqueue
* with a single buffer. From that point forward, all conversations consist of
* a hypervisor request (a call to this function) which directs us to refill
* the virtqueue with a fresh stats buffer. Since stats collection can sleep,
* we delegate the job to a freezable workqueue that will do the actual work via
* stats_handle_request().
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
*/
static void stats_request(struct virtqueue *vq)
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
{
struct virtio_balloon *vb = vq->vdev->priv;
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
spin_lock(&vb->stop_update_lock);
if (!vb->stop_update)
queue_work(system_freezable_wq, &vb->update_balloon_stats_work);
spin_unlock(&vb->stop_update_lock);
}
static void stats_handle_request(struct virtio_balloon *vb)
{
struct virtqueue *vq;
struct scatterlist sg;
unsigned int len, num_stats;
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
num_stats = update_balloon_stats(vb);
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
vq = vb->stats_vq;
if (!virtqueue_get_buf(vq, &len))
return;
sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
virtqueue_add_outbuf(vq, &sg, 1, vb, GFP_KERNEL);
virtqueue_kick(vq);
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
}
static inline s64 towards_target(struct virtio_balloon *vb)
{
s64 target;
u32 num_pages;
virtio_cread(vb->vdev, struct virtio_balloon_config, num_pages,
&num_pages);
/* Legacy balloon config space is LE, unlike all other devices. */
if (!virtio_has_feature(vb->vdev, VIRTIO_F_VERSION_1))
num_pages = le32_to_cpu((__force __le32)num_pages);
target = num_pages;
return target - vb->num_pages;
}
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
/* Gives back @num_to_return blocks of free pages to mm. */
static unsigned long return_free_pages_to_mm(struct virtio_balloon *vb,
unsigned long num_to_return)
{
struct page *page;
unsigned long num_returned;
spin_lock_irq(&vb->free_page_list_lock);
for (num_returned = 0; num_returned < num_to_return; num_returned++) {
page = balloon_page_pop(&vb->free_page_list);
if (!page)
break;
free_pages((unsigned long)page_address(page),
VIRTIO_BALLOON_HINT_BLOCK_ORDER);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
vb->num_free_page_blocks -= num_returned;
spin_unlock_irq(&vb->free_page_list_lock);
return num_returned;
}
static void virtio_balloon_queue_free_page_work(struct virtio_balloon *vb)
{
if (!virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
return;
/* No need to queue the work if the bit was already set. */
if (test_and_set_bit(VIRTIO_BALLOON_CONFIG_READ_CMD_ID,
&vb->config_read_bitmap))
return;
queue_work(vb->balloon_wq, &vb->report_free_page_work);
}
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
static void virtballoon_changed(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
unsigned long flags;
spin_lock_irqsave(&vb->stop_update_lock, flags);
if (!vb->stop_update) {
queue_work(system_freezable_wq,
&vb->update_balloon_size_work);
virtio_balloon_queue_free_page_work(vb);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
spin_unlock_irqrestore(&vb->stop_update_lock, flags);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
static void update_balloon_size(struct virtio_balloon *vb)
{
u32 actual = vb->num_pages;
/* Legacy balloon config space is LE, unlike all other devices. */
if (!virtio_has_feature(vb->vdev, VIRTIO_F_VERSION_1))
actual = (__force u32)cpu_to_le32(actual);
virtio_cwrite(vb->vdev, struct virtio_balloon_config, actual,
&actual);
}
static void update_balloon_stats_func(struct work_struct *work)
{
struct virtio_balloon *vb;
vb = container_of(work, struct virtio_balloon,
update_balloon_stats_work);
stats_handle_request(vb);
}
static void update_balloon_size_func(struct work_struct *work)
{
struct virtio_balloon *vb;
s64 diff;
vb = container_of(work, struct virtio_balloon,
update_balloon_size_work);
diff = towards_target(vb);
if (!diff)
return;
if (diff > 0)
diff -= fill_balloon(vb, diff);
else
diff += leak_balloon(vb, -diff);
update_balloon_size(vb);
if (diff)
queue_work(system_freezable_wq, work);
}
static int init_vqs(struct virtio_balloon *vb)
{
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
struct virtqueue *vqs[VIRTIO_BALLOON_VQ_MAX];
vq_callback_t *callbacks[VIRTIO_BALLOON_VQ_MAX];
const char *names[VIRTIO_BALLOON_VQ_MAX];
int err;
/*
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
* Inflateq and deflateq are used unconditionally. The names[]
* will be NULL if the related feature is not enabled, which will
* cause no allocation for the corresponding virtqueue in find_vqs.
*/
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
callbacks[VIRTIO_BALLOON_VQ_INFLATE] = balloon_ack;
names[VIRTIO_BALLOON_VQ_INFLATE] = "inflate";
callbacks[VIRTIO_BALLOON_VQ_DEFLATE] = balloon_ack;
names[VIRTIO_BALLOON_VQ_DEFLATE] = "deflate";
callbacks[VIRTIO_BALLOON_VQ_STATS] = NULL;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
names[VIRTIO_BALLOON_VQ_STATS] = NULL;
callbacks[VIRTIO_BALLOON_VQ_FREE_PAGE] = NULL;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
names[VIRTIO_BALLOON_VQ_FREE_PAGE] = NULL;
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
names[VIRTIO_BALLOON_VQ_REPORTING] = NULL;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
names[VIRTIO_BALLOON_VQ_STATS] = "stats";
callbacks[VIRTIO_BALLOON_VQ_STATS] = stats_request;
}
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) {
names[VIRTIO_BALLOON_VQ_FREE_PAGE] = "free_page_vq";
callbacks[VIRTIO_BALLOON_VQ_FREE_PAGE] = NULL;
}
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING)) {
names[VIRTIO_BALLOON_VQ_REPORTING] = "reporting_vq";
callbacks[VIRTIO_BALLOON_VQ_REPORTING] = balloon_ack;
}
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
err = vb->vdev->config->find_vqs(vb->vdev, VIRTIO_BALLOON_VQ_MAX,
vqs, callbacks, names, NULL, NULL);
if (err)
return err;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
vb->inflate_vq = vqs[VIRTIO_BALLOON_VQ_INFLATE];
vb->deflate_vq = vqs[VIRTIO_BALLOON_VQ_DEFLATE];
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_STATS_VQ)) {
struct scatterlist sg;
unsigned int num_stats;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
vb->stats_vq = vqs[VIRTIO_BALLOON_VQ_STATS];
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
/*
* Prime this virtqueue with one buffer so the hypervisor can
* use it to signal us later (it can't be broken yet!).
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
*/
num_stats = update_balloon_stats(vb);
sg_init_one(&sg, vb->stats, sizeof(vb->stats[0]) * num_stats);
err = virtqueue_add_outbuf(vb->stats_vq, &sg, 1, vb,
GFP_KERNEL);
if (err) {
dev_warn(&vb->vdev->dev, "%s: add stat_vq failed\n",
__func__);
return err;
}
virtqueue_kick(vb->stats_vq);
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
}
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
vb->free_page_vq = vqs[VIRTIO_BALLOON_VQ_FREE_PAGE];
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING))
vb->reporting_vq = vqs[VIRTIO_BALLOON_VQ_REPORTING];
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
return 0;
}
static u32 virtio_balloon_cmd_id_received(struct virtio_balloon *vb)
{
if (test_and_clear_bit(VIRTIO_BALLOON_CONFIG_READ_CMD_ID,
&vb->config_read_bitmap)) {
virtio_cread(vb->vdev, struct virtio_balloon_config,
free_page_hint_cmd_id,
&vb->cmd_id_received_cache);
/* Legacy balloon config space is LE, unlike all other devices. */
if (!virtio_has_feature(vb->vdev, VIRTIO_F_VERSION_1))
vb->cmd_id_received_cache = le32_to_cpu((__force __le32)vb->cmd_id_received_cache);
}
return vb->cmd_id_received_cache;
}
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
static int send_cmd_id_start(struct virtio_balloon *vb)
{
struct scatterlist sg;
struct virtqueue *vq = vb->free_page_vq;
int err, unused;
/* Detach all the used buffers from the vq */
while (virtqueue_get_buf(vq, &unused))
;
vb->cmd_id_active = virtio32_to_cpu(vb->vdev,
virtio_balloon_cmd_id_received(vb));
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
sg_init_one(&sg, &vb->cmd_id_active, sizeof(vb->cmd_id_active));
err = virtqueue_add_outbuf(vq, &sg, 1, &vb->cmd_id_active, GFP_KERNEL);
if (!err)
virtqueue_kick(vq);
return err;
}
static int send_cmd_id_stop(struct virtio_balloon *vb)
{
struct scatterlist sg;
struct virtqueue *vq = vb->free_page_vq;
int err, unused;
/* Detach all the used buffers from the vq */
while (virtqueue_get_buf(vq, &unused))
;
sg_init_one(&sg, &vb->cmd_id_stop, sizeof(vb->cmd_id_stop));
err = virtqueue_add_outbuf(vq, &sg, 1, &vb->cmd_id_stop, GFP_KERNEL);
if (!err)
virtqueue_kick(vq);
return err;
}
static int get_free_page_and_send(struct virtio_balloon *vb)
{
struct virtqueue *vq = vb->free_page_vq;
struct page *page;
struct scatterlist sg;
int err, unused;
void *p;
/* Detach all the used buffers from the vq */
while (virtqueue_get_buf(vq, &unused))
;
page = alloc_pages(VIRTIO_BALLOON_FREE_PAGE_ALLOC_FLAG,
VIRTIO_BALLOON_HINT_BLOCK_ORDER);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
/*
* When the allocation returns NULL, it indicates that we have got all
* the possible free pages, so return -EINTR to stop.
*/
if (!page)
return -EINTR;
p = page_address(page);
sg_init_one(&sg, p, VIRTIO_BALLOON_HINT_BLOCK_BYTES);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
/* There is always 1 entry reserved for the cmd id to use. */
if (vq->num_free > 1) {
err = virtqueue_add_inbuf(vq, &sg, 1, p, GFP_KERNEL);
if (unlikely(err)) {
free_pages((unsigned long)p,
VIRTIO_BALLOON_HINT_BLOCK_ORDER);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
return err;
}
virtqueue_kick(vq);
spin_lock_irq(&vb->free_page_list_lock);
balloon_page_push(&vb->free_page_list, page);
vb->num_free_page_blocks++;
spin_unlock_irq(&vb->free_page_list_lock);
} else {
/*
* The vq has no available entry to add this page block, so
* just free it.
*/
free_pages((unsigned long)p, VIRTIO_BALLOON_HINT_BLOCK_ORDER);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
return 0;
}
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
static int send_free_pages(struct virtio_balloon *vb)
{
int err;
u32 cmd_id_active;
while (1) {
/*
* If a stop id or a new cmd id was just received from host,
* stop the reporting.
*/
cmd_id_active = virtio32_to_cpu(vb->vdev, vb->cmd_id_active);
if (unlikely(cmd_id_active !=
virtio_balloon_cmd_id_received(vb)))
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
break;
/*
* The free page blocks are allocated and sent to host one by
* one.
*/
err = get_free_page_and_send(vb);
if (err == -EINTR)
break;
else if (unlikely(err))
return err;
}
return 0;
}
static void virtio_balloon_report_free_page(struct virtio_balloon *vb)
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
{
int err;
struct device *dev = &vb->vdev->dev;
/* Start by sending the received cmd id to host with an outbuf. */
err = send_cmd_id_start(vb);
if (unlikely(err))
dev_err(dev, "Failed to send a start id, err = %d\n", err);
err = send_free_pages(vb);
if (unlikely(err))
dev_err(dev, "Failed to send a free page, err = %d\n", err);
/* End by sending a stop id to host with an outbuf. */
err = send_cmd_id_stop(vb);
if (unlikely(err))
dev_err(dev, "Failed to send a stop id, err = %d\n", err);
}
static void report_free_page_func(struct work_struct *work)
{
struct virtio_balloon *vb = container_of(work, struct virtio_balloon,
report_free_page_work);
u32 cmd_id_received;
cmd_id_received = virtio_balloon_cmd_id_received(vb);
if (cmd_id_received == VIRTIO_BALLOON_CMD_ID_DONE) {
/* Pass ULONG_MAX to give back all the free pages */
return_free_pages_to_mm(vb, ULONG_MAX);
} else if (cmd_id_received != VIRTIO_BALLOON_CMD_ID_STOP &&
cmd_id_received !=
virtio32_to_cpu(vb->vdev, vb->cmd_id_active)) {
virtio_balloon_report_free_page(vb);
}
}
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
#ifdef CONFIG_BALLOON_COMPACTION
/*
* virtballoon_migratepage - perform the balloon page migration on behalf of
* a compation thread. (called under page lock)
* @vb_dev_info: the balloon device
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
* @newpage: page that will replace the isolated page after migration finishes.
* @page : the isolated (old) page that is about to be migrated to newpage.
* @mode : compaction mode -- not used for balloon page migration.
*
* After a ballooned page gets isolated by compaction procedures, this is the
* function that performs the page migration on behalf of a compaction thread
* The page migration for virtio balloon is done in a simple swap fashion which
* follows these two macro steps:
* 1) insert newpage into vb->pages list and update the host about it;
* 2) update the host about the old page removed from vb->pages list;
*
* This function preforms the balloon page migration task.
* Called through balloon_mapping->a_ops->migratepage
*/
static int virtballoon_migratepage(struct balloon_dev_info *vb_dev_info,
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
struct page *newpage, struct page *page, enum migrate_mode mode)
{
struct virtio_balloon *vb = container_of(vb_dev_info,
struct virtio_balloon, vb_dev_info);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
unsigned long flags;
/*
* In order to avoid lock contention while migrating pages concurrently
* to leak_balloon() or fill_balloon() we just give up the balloon_lock
* this turn, as it is easier to retry the page migration later.
* This also prevents fill_balloon() getting stuck into a mutex
* recursion in the case it ends up triggering memory compaction
* while it is attempting to inflate the ballon.
*/
if (!mutex_trylock(&vb->balloon_lock))
return -EAGAIN;
mm/balloon_compaction: redesign ballooned pages management Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:29:27 +07:00
get_page(newpage); /* balloon reference */
virtio-balloon: fix managed page counts when migrating pages between zones In case we have to migrate a ballon page to a newpage of another zone, the managed page count of both zones is wrong. Paired with memory offlining (which will adjust the managed page count), we can trigger kernel crashes and all kinds of different symptoms. One way to reproduce: 1. Start a QEMU guest with 4GB, no NUMA 2. Hotplug a 1GB DIMM and online the memory to ZONE_NORMAL 3. Inflate the balloon to 1GB 4. Unplug the DIMM (be quick, otherwise unmovable data ends up on it) 5. Observe /proc/zoneinfo Node 0, zone Normal pages free 16810 min 24848885473806 low 18471592959183339 high 36918337032892872 spanned 262144 present 262144 managed 18446744073709533486 6. Do anything that requires some memory (e.g., inflate the balloon some more). The OOM goes crazy and the system crashes [ 238.324946] Out of memory: Killed process 537 (login) total-vm:27584kB, anon-rss:860kB, file-rss:0kB, shmem-rss:00 [ 238.338585] systemd invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0, oom_score_adj=0 [ 238.339420] CPU: 0 PID: 1 Comm: systemd Tainted: G D W 5.4.0-next-20191204+ #75 [ 238.340139] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu4 [ 238.341121] Call Trace: [ 238.341337] dump_stack+0x8f/0xd0 [ 238.341630] dump_header+0x61/0x5ea [ 238.341942] oom_kill_process.cold+0xb/0x10 [ 238.342299] out_of_memory+0x24d/0x5a0 [ 238.342625] __alloc_pages_slowpath+0xd12/0x1020 [ 238.343024] __alloc_pages_nodemask+0x391/0x410 [ 238.343407] pagecache_get_page+0xc3/0x3a0 [ 238.343757] filemap_fault+0x804/0xc30 [ 238.344083] ? ext4_filemap_fault+0x28/0x42 [ 238.344444] ext4_filemap_fault+0x30/0x42 [ 238.344789] __do_fault+0x37/0x1a0 [ 238.345087] __handle_mm_fault+0x104d/0x1ab0 [ 238.345450] handle_mm_fault+0x169/0x360 [ 238.345790] do_user_addr_fault+0x20d/0x490 [ 238.346154] do_page_fault+0x31/0x210 [ 238.346468] async_page_fault+0x43/0x50 [ 238.346797] RIP: 0033:0x7f47eba4197e [ 238.347110] Code: Bad RIP value. [ 238.347387] RSP: 002b:00007ffd7c0c1890 EFLAGS: 00010293 [ 238.347834] RAX: 0000000000000002 RBX: 000055d196a20a20 RCX: 00007f47eba4197e [ 238.348437] RDX: 0000000000000033 RSI: 00007ffd7c0c18c0 RDI: 0000000000000004 [ 238.349047] RBP: 00007ffd7c0c1c20 R08: 0000000000000000 R09: 0000000000000033 [ 238.349660] R10: 00000000ffffffff R11: 0000000000000293 R12: 0000000000000001 [ 238.350261] R13: ffffffffffffffff R14: 0000000000000000 R15: 00007ffd7c0c18c0 [ 238.350878] Mem-Info: [ 238.351085] active_anon:3121 inactive_anon:51 isolated_anon:0 [ 238.351085] active_file:12 inactive_file:7 isolated_file:0 [ 238.351085] unevictable:0 dirty:0 writeback:0 unstable:0 [ 238.351085] slab_reclaimable:5565 slab_unreclaimable:10170 [ 238.351085] mapped:3 shmem:111 pagetables:155 bounce:0 [ 238.351085] free:720717 free_pcp:2 free_cma:0 [ 238.353757] Node 0 active_anon:12484kB inactive_anon:204kB active_file:48kB inactive_file:28kB unevictable:0kB iss [ 238.355979] Node 0 DMA free:11556kB min:36kB low:48kB high:60kB reserved_highatomic:0KB active_anon:152kB inactivB [ 238.358345] lowmem_reserve[]: 0 2955 2884 2884 2884 [ 238.358761] Node 0 DMA32 free:2677864kB min:7004kB low:10028kB high:13052kB reserved_highatomic:0KB active_anon:0B [ 238.361202] lowmem_reserve[]: 0 0 72057594037927865 72057594037927865 72057594037927865 [ 238.361888] Node 0 Normal free:193448kB min:99395541895224kB low:73886371836733356kB high:147673348131571488kB reB [ 238.364765] lowmem_reserve[]: 0 0 0 0 0 [ 238.365101] Node 0 DMA: 7*4kB (U) 5*8kB (UE) 6*16kB (UME) 2*32kB (UM) 1*64kB (U) 2*128kB (UE) 3*256kB (UME) 2*512B [ 238.366379] Node 0 DMA32: 0*4kB 1*8kB (U) 2*16kB (UM) 2*32kB (UM) 2*64kB (UM) 1*128kB (U) 1*256kB (U) 1*512kB (U)B [ 238.367654] Node 0 Normal: 1985*4kB (UME) 1321*8kB (UME) 844*16kB (UME) 524*32kB (UME) 300*64kB (UME) 138*128kB (B [ 238.369184] Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB [ 238.369915] 130 total pagecache pages [ 238.370241] 0 pages in swap cache [ 238.370533] Swap cache stats: add 0, delete 0, find 0/0 [ 238.370981] Free swap = 0kB [ 238.371239] Total swap = 0kB [ 238.371488] 1048445 pages RAM [ 238.371756] 0 pages HighMem/MovableOnly [ 238.372090] 306992 pages reserved [ 238.372376] 0 pages cma reserved [ 238.372661] 0 pages hwpoisoned In another instance (older kernel), I was able to observe this (negative page count :/): [ 180.896971] Offlined Pages 32768 [ 182.667462] Offlined Pages 32768 [ 184.408117] Offlined Pages 32768 [ 186.026321] Offlined Pages 32768 [ 187.684861] Offlined Pages 32768 [ 189.227013] Offlined Pages 32768 [ 190.830303] Offlined Pages 32768 [ 190.833071] Built 1 zonelists, mobility grouping on. Total pages: -36920272750453009 In another instance (older kernel), I was no longer able to start any process: [root@vm ~]# [ 214.348068] Offlined Pages 32768 [ 215.973009] Offlined Pages 32768 cat /proc/meminfo -bash: fork: Cannot allocate memory [root@vm ~]# cat /proc/meminfo -bash: fork: Cannot allocate memory Fix it by properly adjusting the managed page count when migrating if the zone changed. The managed page count of the zones now looks after unplug of the DIMM (and after deflating the balloon) just like before inflating the balloon (and plugging+onlining the DIMM). We'll temporarily modify the totalram page count. If this ever becomes a problem, we can fine tune by providing helpers that don't touch the totalram pages (e.g., adjust_zone_managed_page_count()). Please note that fixing up the managed page count is only necessary when we adjusted the managed page count when inflating - only if we don't have VIRTIO_BALLOON_F_DEFLATE_ON_OOM. With that feature, the managed page count is not touched when inflating/deflating. Reported-by: Yumei Huang <yuhuang@redhat.com> Fixes: 3dcc0571cd64 ("mm: correctly update zone->managed_pages") Cc: <stable@vger.kernel.org> # v3.11+ Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Igor Mammedov <imammedo@redhat.com> Cc: virtualization@lists.linux-foundation.org Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-12-11 18:11:52 +07:00
/*
* When we migrate a page to a different zone and adjusted the
* managed page count when inflating, we have to fixup the count of
* both involved zones.
*/
if (!virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM) &&
page_zone(page) != page_zone(newpage)) {
adjust_managed_page_count(page, 1);
adjust_managed_page_count(newpage, -1);
}
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
/* balloon's page migration 1st step -- inflate "newpage" */
spin_lock_irqsave(&vb_dev_info->pages_lock, flags);
balloon_page_insert(vb_dev_info, newpage);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
vb_dev_info->isolated_pages--;
__count_vm_event(BALLOON_MIGRATE);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
set_page_pfns(vb, vb->pfns, newpage);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
tell_host(vb, vb->inflate_vq);
mm/balloon_compaction: redesign ballooned pages management Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:29:27 +07:00
/* balloon's page migration 2nd step -- deflate "page" */
virtio_balloon: fix another race between migration and ballooning Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e22504296d4f64f ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Huang Chong <huang.chong@zte.com.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-07-18 09:29:28 +07:00
spin_lock_irqsave(&vb_dev_info->pages_lock, flags);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
balloon_page_delete(page);
virtio_balloon: fix another race between migration and ballooning Kernel panic when with high memory pressure, calltrace looks like, PID: 21439 TASK: ffff881be3afedd0 CPU: 16 COMMAND: "java" #0 [ffff881ec7ed7630] machine_kexec at ffffffff81059beb #1 [ffff881ec7ed7690] __crash_kexec at ffffffff81105942 #2 [ffff881ec7ed7760] crash_kexec at ffffffff81105a30 #3 [ffff881ec7ed7778] oops_end at ffffffff816902c8 #4 [ffff881ec7ed77a0] no_context at ffffffff8167ff46 #5 [ffff881ec7ed77f0] __bad_area_nosemaphore at ffffffff8167ffdc #6 [ffff881ec7ed7838] __node_set at ffffffff81680300 #7 [ffff881ec7ed7860] __do_page_fault at ffffffff8169320f #8 [ffff881ec7ed78c0] do_page_fault at ffffffff816932b5 #9 [ffff881ec7ed78f0] page_fault at ffffffff8168f4c8 [exception RIP: _raw_spin_lock_irqsave+47] RIP: ffffffff8168edef RSP: ffff881ec7ed79a8 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffffea0019740d00 RCX: ffff881ec7ed7fd8 RDX: 0000000000020000 RSI: 0000000000000016 RDI: 0000000000000008 RBP: ffff881ec7ed79a8 R8: 0000000000000246 R9: 000000000001a098 R10: ffff88107ffda000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000008 R14: ffff881ec7ed7a80 R15: ffff881be3afedd0 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 It happens in the pagefault and results in double pagefault during compacting pages when memory allocation fails. Analysed the vmcore, the page leads to second pagefault is corrupted with _mapcount=-256, but private=0. It's caused by the race between migration and ballooning, and lock missing in virtballoon_migratepage() of virtio_balloon driver. This patch fix the bug. Fixes: e22504296d4f64f ("virtio_balloon: introduce migration primitives to balloon pages") Cc: stable@vger.kernel.org Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn> Signed-off-by: Huang Chong <huang.chong@zte.com.cn> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-07-18 09:29:28 +07:00
spin_unlock_irqrestore(&vb_dev_info->pages_lock, flags);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
vb->num_pfns = VIRTIO_BALLOON_PAGES_PER_PAGE;
set_page_pfns(vb, vb->pfns, page);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
tell_host(vb, vb->deflate_vq);
mutex_unlock(&vb->balloon_lock);
mm/balloon_compaction: redesign ballooned pages management Sasha Levin reported KASAN splash inside isolate_migratepages_range(). Problem is in the function __is_movable_balloon_page() which tests AS_BALLOON_MAP in page->mapping->flags. This function has no protection against anonymous pages. As result it tried to check address space flags inside struct anon_vma. Further investigation shows more problems in current implementation: * Special branch in __unmap_and_move() never works: balloon_page_movable() checks page flags and page_count. In __unmap_and_move() page is locked, reference counter is elevated, thus balloon_page_movable() always fails. As a result execution goes to the normal migration path. virtballoon_migratepage() returns MIGRATEPAGE_BALLOON_SUCCESS instead of MIGRATEPAGE_SUCCESS, move_to_new_page() thinks this is an error code and assigns newpage->mapping to NULL. Newly migrated page lose connectivity with balloon an all ability for further migration. * lru_lock erroneously required in isolate_migratepages_range() for isolation ballooned page. This function releases lru_lock periodically, this makes migration mostly impossible for some pages. * balloon_page_dequeue have a tight race with balloon_page_isolate: balloon_page_isolate could be executed in parallel with dequeue between picking page from list and locking page_lock. Race is rare because they use trylock_page() for locking. This patch fixes all of them. Instead of fake mapping with special flag this patch uses special state of page->_mapcount: PAGE_BALLOON_MAPCOUNT_VALUE = -256. Buddy allocator uses PAGE_BUDDY_MAPCOUNT_VALUE = -128 for similar purpose. Storing mark directly in struct page makes everything safer and easier. PagePrivate is used to mark pages present in page list (i.e. not isolated, like PageLRU for normal pages). It replaces special rules for reference counter and makes balloon migration similar to migration of normal pages. This flag is protected by page_lock together with link to the balloon device. Signed-off-by: Konstantin Khlebnikov <k.khlebnikov@samsung.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/p/53E6CEAA.9020105@oracle.com Cc: Rafael Aquini <aquini@redhat.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: <stable@vger.kernel.org> [3.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-10 05:29:27 +07:00
put_page(page); /* balloon reference */
mm: fix build warnings in <linux/compaction.h> Randy reported below build error. > In file included from ../include/linux/balloon_compaction.h:48:0, > from ../mm/balloon_compaction.c:11: > ../include/linux/compaction.h:237:51: warning: 'struct node' declared inside parameter list [enabled by default] > static inline int compaction_register_node(struct node *node) > ../include/linux/compaction.h:237:51: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default] > ../include/linux/compaction.h:242:54: warning: 'struct node' declared inside parameter list [enabled by default] > static inline void compaction_unregister_node(struct node *node) > It was caused by non-lru page migration which needs compaction.h but compaction.h doesn't include any header to be standalone. I think proper header for non-lru page migration is migrate.h rather than compaction.h because migrate.h has already headers needed to work non-lru page migration indirectly like isolate_mode_t, migrate_mode MIGRATEPAGE_SUCCESS. [akpm@linux-foundation.org: revert mm-balloon-use-general-non-lru-movable-page-feature-fix.patch temp fix] Link: http://lkml.kernel.org/r/20160610003304.GE29779@bbox Signed-off-by: Minchan Kim <minchan@kernel.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Gioh Kim <gi-oh.kim@profitbricks.com> Cc: Rafael Aquini <aquini@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-07-27 05:26:50 +07:00
return MIGRATEPAGE_SUCCESS;
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
}
static int balloon_init_fs_context(struct fs_context *fc)
{
return init_pseudo(fc, BALLOON_KVM_MAGIC) ? 0 : -ENOMEM;
}
static struct file_system_type balloon_fs = {
.name = "balloon-kvm",
.init_fs_context = balloon_init_fs_context,
.kill_sb = kill_anon_super,
};
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
#endif /* CONFIG_BALLOON_COMPACTION */
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
static unsigned long shrink_free_pages(struct virtio_balloon *vb,
unsigned long pages_to_free)
virtio_balloon: replace oom notifier with shrinker The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-16 14:50:58 +07:00
{
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
unsigned long blocks_to_free, blocks_freed;
virtio_balloon: replace oom notifier with shrinker The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-16 14:50:58 +07:00
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
pages_to_free = round_up(pages_to_free,
VIRTIO_BALLOON_HINT_BLOCK_PAGES);
blocks_to_free = pages_to_free / VIRTIO_BALLOON_HINT_BLOCK_PAGES;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
blocks_freed = return_free_pages_to_mm(vb, blocks_to_free);
return blocks_freed * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
static unsigned long virtio_balloon_shrinker_scan(struct shrinker *shrinker,
struct shrink_control *sc)
{
struct virtio_balloon *vb = container_of(shrinker,
struct virtio_balloon, shrinker);
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
return shrink_free_pages(vb, sc->nr_to_scan);
virtio_balloon: replace oom notifier with shrinker The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-16 14:50:58 +07:00
}
static unsigned long virtio_balloon_shrinker_count(struct shrinker *shrinker,
struct shrink_control *sc)
{
struct virtio_balloon *vb = container_of(shrinker,
struct virtio_balloon, shrinker);
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
return vb->num_free_page_blocks * VIRTIO_BALLOON_HINT_BLOCK_PAGES;
}
static int virtio_balloon_oom_notify(struct notifier_block *nb,
unsigned long dummy, void *parm)
{
struct virtio_balloon *vb = container_of(nb,
struct virtio_balloon, oom_nb);
unsigned long *freed = parm;
*freed += leak_balloon(vb, VIRTIO_BALLOON_OOM_NR_PAGES) /
VIRTIO_BALLOON_PAGES_PER_PAGE;
update_balloon_size(vb);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
return NOTIFY_OK;
virtio_balloon: replace oom notifier with shrinker The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-16 14:50:58 +07:00
}
static void virtio_balloon_unregister_shrinker(struct virtio_balloon *vb)
{
unregister_shrinker(&vb->shrinker);
}
static int virtio_balloon_register_shrinker(struct virtio_balloon *vb)
{
vb->shrinker.scan_objects = virtio_balloon_shrinker_scan;
vb->shrinker.count_objects = virtio_balloon_shrinker_count;
vb->shrinker.seeks = DEFAULT_SEEKS;
return register_shrinker(&vb->shrinker);
}
static int virtballoon_probe(struct virtio_device *vdev)
{
struct virtio_balloon *vb;
int err;
if (!vdev->config->get) {
dev_err(&vdev->dev, "%s failure: config access disabled\n",
__func__);
return -EINVAL;
}
vdev->priv = vb = kzalloc(sizeof(*vb), GFP_KERNEL);
if (!vb) {
err = -ENOMEM;
goto out;
}
INIT_WORK(&vb->update_balloon_stats_work, update_balloon_stats_func);
INIT_WORK(&vb->update_balloon_size_work, update_balloon_size_func);
spin_lock_init(&vb->stop_update_lock);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
mutex_init(&vb->balloon_lock);
init_waitqueue_head(&vb->acked);
vb->vdev = vdev;
balloon_devinfo_init(&vb->vb_dev_info);
virtio_balloon: introduce migration primitives to balloon pages Memory fragmentation introduced by ballooning might reduce significantly the number of 2MB contiguous memory blocks that can be used within a guest, thus imposing performance penalties associated with the reduced number of transparent huge pages that could be used by the guest workload. Besides making balloon pages movable at allocation time and introducing the necessary primitives to perform balloon page migration/compaction, this patch also introduces the following locking scheme, in order to enhance the syncronization methods for accessing elements of struct virtio_balloon, thus providing protection against concurrent access introduced by parallel memory migration threads. - balloon_lock (mutex) : synchronizes the access demand to elements of struct virtio_balloon and its queue operations; [yongjun_wei@trendmicro.com.cn: fix missing unlock on error in fill_balloon()] [akpm@linux-foundation.org: avoid having multiple return points in fill_balloon()] [akpm@linux-foundation.org: fix printk warning]Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andi Kleen <andi@firstfloor.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Minchan Kim <minchan@kernel.org> Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-12 07:02:45 +07:00
err = init_vqs(vb);
if (err)
goto out_free_vb;
#ifdef CONFIG_BALLOON_COMPACTION
balloon_mnt = kern_mount(&balloon_fs);
if (IS_ERR(balloon_mnt)) {
err = PTR_ERR(balloon_mnt);
goto out_del_vqs;
}
vb->vb_dev_info.migratepage = virtballoon_migratepage;
vb->vb_dev_info.inode = alloc_anon_inode(balloon_mnt->mnt_sb);
if (IS_ERR(vb->vb_dev_info.inode)) {
err = PTR_ERR(vb->vb_dev_info.inode);
goto out_kern_unmount;
}
vb->vb_dev_info.inode->i_mapping->a_ops = &balloon_aops;
#endif
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) {
/*
* There is always one entry reserved for cmd id, so the ring
* size needs to be at least two to report free page hints.
*/
if (virtqueue_get_vring_size(vb->free_page_vq) < 2) {
err = -ENOSPC;
goto out_iput;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
vb->balloon_wq = alloc_workqueue("balloon-wq",
WQ_FREEZABLE | WQ_CPU_INTENSIVE, 0);
if (!vb->balloon_wq) {
err = -ENOMEM;
goto out_iput;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
INIT_WORK(&vb->report_free_page_work, report_free_page_func);
vb->cmd_id_received_cache = VIRTIO_BALLOON_CMD_ID_STOP;
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
vb->cmd_id_active = cpu_to_virtio32(vb->vdev,
VIRTIO_BALLOON_CMD_ID_STOP);
vb->cmd_id_stop = cpu_to_virtio32(vb->vdev,
VIRTIO_BALLOON_CMD_ID_STOP);
spin_lock_init(&vb->free_page_list_lock);
INIT_LIST_HEAD(&vb->free_page_list);
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
/*
* We're allowed to reuse any free pages, even if they are
* still to be processed by the host.
*/
err = virtio_balloon_register_shrinker(vb);
if (err)
goto out_del_balloon_wq;
}
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM)) {
vb->oom_nb.notifier_call = virtio_balloon_oom_notify;
vb->oom_nb.priority = VIRTIO_BALLOON_OOM_NOTIFY_PRIORITY;
err = register_oom_notifier(&vb->oom_nb);
if (err < 0)
goto out_unregister_shrinker;
virtio-balloon: pull page poisoning config out of free page hinting Currently the page poisoning setting wasn't being enabled unless free page hinting was enabled. However we will need the page poisoning tracking logic as well for free page reporting. As such pull it out and make it a separate bit of config in the probe function. In addition we need to add support for the more recent init_on_free feature which expects a behavior similar to page poisoning in that we expect the page to be pre-zeroed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224646.29318.695.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:01 +07:00
}
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
virtio-balloon: pull page poisoning config out of free page hinting Currently the page poisoning setting wasn't being enabled unless free page hinting was enabled. However we will need the page poisoning tracking logic as well for free page reporting. As such pull it out and make it a separate bit of config in the probe function. In addition we need to add support for the more recent init_on_free feature which expects a behavior similar to page poisoning in that we expect the page to be pre-zeroed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224646.29318.695.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:01 +07:00
if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_PAGE_POISON)) {
/* Start with poison val of 0 representing general init */
__u32 poison_val = 0;
/*
* Let the hypervisor know that we are expecting a
* specific value to be written back in balloon pages.
*
* If the PAGE_POISON value was larger than a byte we would
* need to byte swap poison_val here to guarantee it is
* little-endian. However for now it is a single byte so we
* can pass it as-is.
virtio-balloon: pull page poisoning config out of free page hinting Currently the page poisoning setting wasn't being enabled unless free page hinting was enabled. However we will need the page poisoning tracking logic as well for free page reporting. As such pull it out and make it a separate bit of config in the probe function. In addition we need to add support for the more recent init_on_free feature which expects a behavior similar to page poisoning in that we expect the page to be pre-zeroed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224646.29318.695.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:01 +07:00
*/
if (!want_init_on_free())
memset(&poison_val, PAGE_POISON, sizeof(poison_val));
virtio-balloon: pull page poisoning config out of free page hinting Currently the page poisoning setting wasn't being enabled unless free page hinting was enabled. However we will need the page poisoning tracking logic as well for free page reporting. As such pull it out and make it a separate bit of config in the probe function. In addition we need to add support for the more recent init_on_free feature which expects a behavior similar to page poisoning in that we expect the page to be pre-zeroed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224646.29318.695.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:01 +07:00
virtio_cwrite(vb->vdev, struct virtio_balloon_config,
poison_val, &poison_val);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
}
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
vb->pr_dev_info.report = virtballoon_free_page_report;
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING)) {
unsigned int capacity;
capacity = virtqueue_get_vring_size(vb->reporting_vq);
if (capacity < PAGE_REPORTING_CAPACITY) {
err = -ENOSPC;
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
goto out_unregister_oom;
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
}
err = page_reporting_register(&vb->pr_dev_info);
if (err)
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
goto out_unregister_oom;
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
}
virtio_device_ready(vdev);
if (towards_target(vb))
virtballoon_changed(vdev);
return 0;
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
out_unregister_oom:
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
unregister_oom_notifier(&vb->oom_nb);
out_unregister_shrinker:
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
virtio_balloon_unregister_shrinker(vb);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
out_del_balloon_wq:
if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
destroy_workqueue(vb->balloon_wq);
out_iput:
#ifdef CONFIG_BALLOON_COMPACTION
iput(vb->vb_dev_info.inode);
out_kern_unmount:
kern_unmount(balloon_mnt);
out_del_vqs:
#endif
vdev->config->del_vqs(vdev);
out_free_vb:
kfree(vb);
out:
return err;
}
static void remove_common(struct virtio_balloon *vb)
{
/* There might be pages left in the balloon: free them. */
while (vb->num_pages)
leak_balloon(vb, vb->num_pages);
update_balloon_size(vb);
/* There might be free pages that are being reported: release them. */
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
return_free_pages_to_mm(vb, ULONG_MAX);
/* Now we reset the device so we can clean up the queues. */
vb->vdev->config->reset(vb->vdev);
vb->vdev->config->del_vqs(vb->vdev);
}
static void virtballoon_remove(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_REPORTING))
page_reporting_unregister(&vb->pr_dev_info);
virtio_balloon: replace oom notifier with shrinker The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-16 14:50:58 +07:00
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_DEFLATE_ON_OOM))
virtio-balloon: switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM Commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") changed the behavior when deflation happens automatically. Instead of deflating when called by the OOM handler, the shrinker is used. However, the balloon is not simply some other slab cache that should be shrunk when under memory pressure. The shrinker does not have a concept of priorities yet, so this behavior cannot be configured. Eventually once that is in place, we might want to switch back after doing proper testing. There was a report that this results in undesired side effects when inflating the balloon to shrink the page cache. [1] "When inflating the balloon against page cache (i.e. no free memory remains) vmscan.c will both shrink page cache, but also invoke the shrinkers -- including the balloon's shrinker. So the balloon driver allocates memory which requires reclaim, vmscan gets this memory by shrinking the balloon, and then the driver adds the memory back to the balloon. Basically a busy no-op." The name "deflate on OOM" makes it pretty clear when deflation should happen - after other approaches to reclaim memory failed, not while reclaiming. This allows to minimize the footprint of a guest - memory will only be taken out of the balloon when really needed. Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because this has no such side effects. Always register the shrinker with VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free pages that are still to be processed by the guest. The hypervisor takes care of identifying and resolving possible races between processing a hinting request and the guest reusing a page. In contrast to pre commit 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker"), don't add a module parameter to configure the number of pages to deflate on OOM. Can be re-added if really needed. Also, pay attention that leak_balloon() returns the number of 4k pages - convert it properly in virtio_balloon_oom_notify(). Testing done by Tyler for future reference: Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42 GB file full of random bytes that we continually cat to /dev/null. This fills the page cache as the file is read. Meanwhile, we trigger the balloon to inflate, with a target size of 53 GB. This setup causes the balloon inflation to pressure the page cache as the page cache is also trying to grow. Afterwards we shrink the balloon back to zero (so total deflate == total inflate). Without this patch (kernel 4.19.0-5): Inflation never reaches the target until we stop the "cat file > /dev/null" process. Total inflation time was 542 seconds. The longest period that made no net forward progress was 315 seconds. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 154828377 balloon_deflate 154828377 With this patch (kernel 5.6.0-rc4+): Total inflation duration was 63 seconds. No deflate-queue activity occurs when pressuring the page-cache. Result of "grep balloon /proc/vmstat" after the test: balloon_inflate 12968539 balloon_deflate 12968539 Conclusion: This patch fixes the issue. In the test it reduced inflate/deflate activity by 12x, and reduced inflation time by 8.6x. But more importantly, if we hadn't killed the "cat file > /dev/null" process then, without the patch, the inflation process would never reach the target. [1] https://www.spinics.net/lists/linux-virtualization/msg40863.html Link: http://lkml.kernel.org/r/20200311135523.18512-2-david@redhat.com Fixes: 71994620bb25 ("virtio_balloon: replace oom notifier with shrinker") Signed-off-by: David Hildenbrand <david@redhat.com> Reported-by: Tyler Sanderson <tysand@google.com> Tested-by: Tyler Sanderson <tysand@google.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Cc: David Rientjes <rientjes@google.com> Cc: Nadav Amit <namit@vmware.com> Cc: Michal Hocko <mhocko@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:22 +07:00
unregister_oom_notifier(&vb->oom_nb);
if (virtio_has_feature(vb->vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT))
virtio_balloon: replace oom notifier with shrinker The OOM notifier is getting deprecated to use for the reasons: - As a callout from the oom context, it is too subtle and easy to generate bugs and corner cases which are hard to track; - It is called too late (after the reclaiming has been performed). Drivers with large amuont of reclaimable memory is expected to release them at an early stage of memory pressure; - The notifier callback isn't aware of oom contrains; Link: https://lkml.org/lkml/2018/7/12/314 This patch replaces the virtio-balloon oom notifier with a shrinker to release balloon pages on memory pressure. The balloon pages are given back to mm adaptively by returning the number of pages that the reclaimer is asking for (i.e. sc->nr_to_scan). Currently the max possible value of sc->nr_to_scan passed to the balloon shrinker is SHRINK_BATCH, which is 128. This is smaller than the limitation that only VIRTIO_BALLOON_ARRAY_PFNS_MAX (256) pages can be returned via one invocation of leak_balloon. But this patch still considers the case that SHRINK_BATCH or shrinker->batch could be changed to a value larger than VIRTIO_BALLOON_ARRAY_PFNS_MAX, which will need to do multiple invocations of leak_balloon. Historically, the feature VIRTIO_BALLOON_F_DEFLATE_ON_OOM has been used to release balloon pages on OOM. We continue to use this feature bit for the shrinker, so the shrinker is only registered when this feature bit has been negotiated with host. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-16 14:50:58 +07:00
virtio_balloon_unregister_shrinker(vb);
spin_lock_irq(&vb->stop_update_lock);
vb->stop_update = true;
spin_unlock_irq(&vb->stop_update_lock);
cancel_work_sync(&vb->update_balloon_size_work);
cancel_work_sync(&vb->update_balloon_stats_work);
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
if (virtio_has_feature(vdev, VIRTIO_BALLOON_F_FREE_PAGE_HINT)) {
cancel_work_sync(&vb->report_free_page_work);
destroy_workqueue(vb->balloon_wq);
}
remove_common(vb);
#ifdef CONFIG_BALLOON_COMPACTION
if (vb->vb_dev_info.inode)
iput(vb->vb_dev_info.inode);
kern_unmount(balloon_mnt);
#endif
kfree(vb);
}
#ifdef CONFIG_PM_SLEEP
virtio: balloon: Add freeze, restore handlers to support S4 Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-22 18:28:35 +07:00
static int virtballoon_freeze(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
virtio: balloon: Add freeze, restore handlers to support S4 Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-22 18:28:35 +07:00
/*
* The workqueue is already frozen by the PM core before this
virtio: balloon: Add freeze, restore handlers to support S4 Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-22 18:28:35 +07:00
* function is called.
*/
remove_common(vb);
virtio: balloon: Add freeze, restore handlers to support S4 Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-22 18:28:35 +07:00
return 0;
}
static int virtballoon_restore(struct virtio_device *vdev)
{
struct virtio_balloon *vb = vdev->priv;
int ret;
ret = init_vqs(vdev->priv);
if (ret)
return ret;
virtio_device_ready(vdev);
if (towards_target(vb))
virtballoon_changed(vdev);
update_balloon_size(vb);
return 0;
}
virtio: balloon: Add freeze, restore handlers to support S4 Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-22 18:28:35 +07:00
#endif
static int virtballoon_validate(struct virtio_device *vdev)
{
/*
* Inform the hypervisor that our pages are poisoned or
* initialized. If we cannot do that then we should disable
* page reporting as it could potentially change the contents
* of our free pages.
*/
virtio-balloon: pull page poisoning config out of free page hinting Currently the page poisoning setting wasn't being enabled unless free page hinting was enabled. However we will need the page poisoning tracking logic as well for free page reporting. As such pull it out and make it a separate bit of config in the probe function. In addition we need to add support for the more recent init_on_free feature which expects a behavior similar to page poisoning in that we expect the page to be pre-zeroed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224646.29318.695.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:01 +07:00
if (!want_init_on_free() &&
(IS_ENABLED(CONFIG_PAGE_POISONING_NO_SANITY) ||
!page_poisoning_enabled()))
__virtio_clear_bit(vdev, VIRTIO_BALLOON_F_PAGE_POISON);
else if (!virtio_has_feature(vdev, VIRTIO_BALLOON_F_PAGE_POISON))
__virtio_clear_bit(vdev, VIRTIO_BALLOON_F_REPORTING);
__virtio_clear_bit(vdev, VIRTIO_F_IOMMU_PLATFORM);
return 0;
}
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
static unsigned int features[] = {
VIRTIO_BALLOON_F_MUST_TELL_HOST,
VIRTIO_BALLOON_F_STATS_VQ,
virtio_balloon: free some memory from balloon on OOM Excessive virtio_balloon inflation can cause invocation of OOM-killer, when Linux is under severe memory pressure. Various mechanisms are responsible for correct virtio_balloon memory management. Nevertheless it is often the case that these control tools does not have enough time to react on fast changing memory load. As a result OS runs out of memory and invokes OOM-killer. The balancing of memory by use of the virtio balloon should not cause the termination of processes while there are pages in the balloon. Now there is no way for virtio balloon driver to free some memory at the last moment before some process will be get killed by OOM-killer. This does not provide a security breach as balloon itself is running inside guest OS and is working in the cooperation with the host. Thus some improvements from guest side should be considered as normal. To solve the problem, introduce a virtio_balloon callback which is expected to be called from the oom notifier call chain in out_of_memory() function. If virtio balloon could release some memory, it will make the system to return and retry the allocation that forced the out of memory killer to run. Allocate virtio feature bit for this: it is not set by default, the the guest will not deflate virtio balloon on OOM without explicit permission from host. Signed-off-by: Raushaniya Maksudova <rmaksudova@parallels.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2014-11-10 06:06:29 +07:00
VIRTIO_BALLOON_F_DEFLATE_ON_OOM,
virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT Negotiation of the VIRTIO_BALLOON_F_FREE_PAGE_HINT feature indicates the support of reporting hints of guest free pages to host via virtio-balloon. Currenlty, only free page blocks of MAX_ORDER - 1 are reported. They are obtained one by one from the mm free list via the regular allocation function. Host requests the guest to report free page hints by sending a new cmd id to the guest via the free_page_report_cmd_id configuration register. When the guest starts to report, it first sends a start cmd to host via the free page vq, which acks to host the cmd id received. When the guest finishes reporting free pages, a stop cmd is sent to host via the vq. Host may also send a stop cmd id to the guest to stop the reporting. VIRTIO_BALLOON_CMD_ID_STOP: Host sends this cmd to stop the guest reporting. VIRTIO_BALLOON_CMD_ID_DONE: Host sends this cmd to tell the guest that the reported pages are ready to be freed. Why does the guest free the reported pages when host tells it is ready to free? This is because freeing pages appears to be expensive for live migration. free_pages() dirties memory very quickly and makes the live migraion not converge in some cases. So it is good to delay the free_page operation when the migration is done, and host sends a command to guest about that. Why do we need the new VIRTIO_BALLOON_CMD_ID_DONE, instead of reusing VIRTIO_BALLOON_CMD_ID_STOP? This is because live migration is usually done in several rounds. At the end of each round, host needs to send a VIRTIO_BALLOON_CMD_ID_STOP cmd to the guest to stop (or say pause) the reporting. The guest resumes the reporting when it receives a new command id at the beginning of the next round. So we need a new cmd id to distinguish between "stop reporting" and "ready to free the reported pages". TODO: - Add a batch page allocation API to amortize the allocation overhead. Signed-off-by: Wei Wang <wei.w.wang@intel.com> Signed-off-by: Liang Li <liang.z.li@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-08-27 08:32:17 +07:00
VIRTIO_BALLOON_F_FREE_PAGE_HINT,
VIRTIO_BALLOON_F_PAGE_POISON,
virtio-balloon: add support for providing free page reports to host Add support for the page reporting feature provided by virtio-balloon. Reporting differs from the regular balloon functionality in that is is much less durable than a standard memory balloon. Instead of creating a list of pages that cannot be accessed the pages are only inaccessible while they are being indicated to the virtio interface. Once the interface has acknowledged them they are placed back into their respective free lists and are once again accessible by the guest system. Unlike a standard balloon we don't inflate and deflate the pages. Instead we perform the reporting, and once the reporting is completed it is assumed that the page has been dropped from the guest and will be faulted back in the next time the page is accessed. Signed-off-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@kernel.org> Cc: Nitesh Narayan Lal <nitesh@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pagupta@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wei Wang <wei.w.wang@intel.com> Cc: Yang Zhang <yang.zhang.wz@gmail.com> Cc: wei qi <weiqi4@huawei.com> Link: http://lkml.kernel.org/r/20200211224657.29318.68624.stgit@localhost.localdomain Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 10:05:05 +07:00
VIRTIO_BALLOON_F_REPORTING,
virtio: Add memory statistics reporting to the balloon driver (V4) Changes since V3: - Do not do endian conversions as they will be done in the host - Report stats that reference a quantity of memory in bytes - Minor coding style updates Changes since V2: - Increase stat field size to 64 bits - Report all sizes in kb (not pages) - Drop anon_pages stat and fix endianness conversion Changes since V1: - Use a virtqueue instead of the device config space When using ballooning to manage overcommitted memory on a host, a system for guests to communicate their memory usage to the host can provide information that will minimize the impact of ballooning on the guests. The current method employs a daemon running in each guest that communicates memory statistics to a host daemon at a specified time interval. The host daemon aggregates this information and inflates and/or deflates balloons according to the level of host memory pressure. This approach is effective but overly complex since a daemon must be installed inside each guest and coordinated to communicate with the host. A simpler approach is to collect memory statistics in the virtio balloon driver and communicate them directly to the hypervisor. This patch enables the guest-side support by adding stats collection and reporting to the virtio balloon driver. Signed-off-by: Adam Litke <agl@us.ibm.com> Cc: Anthony Liguori <anthony@codemonkey.ws> Cc: virtualization@lists.linux-foundation.org Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)
2009-11-30 23:14:15 +07:00
};
static struct virtio_driver virtio_balloon_driver = {
.feature_table = features,
.feature_table_size = ARRAY_SIZE(features),
.driver.name = KBUILD_MODNAME,
.driver.owner = THIS_MODULE,
.id_table = id_table,
.validate = virtballoon_validate,
.probe = virtballoon_probe,
.remove = virtballoon_remove,
.config_changed = virtballoon_changed,
#ifdef CONFIG_PM_SLEEP
virtio: balloon: Add freeze, restore handlers to support S4 Handling balloon hibernate / restore is tricky. If the balloon was inflated before going into the hibernation state, upon resume, the host will not have any memory of that. Any pages that were passed on to the host earlier would most likely be invalid, and the host will have to re-balloon to the previous value to get in the pre-hibernate state. So the only sane thing for the guest to do here is to discard all the pages that were put in the balloon. When to discard the pages is the next question. One solution is to deflate the balloon just before writing the image to the disk (in the freeze() PM callback). However, asking for pages from the host just to discard them immediately after seems wasteful of resources. Hence, it makes sense to do this by just fudging our counters soon after wakeup. This means we don't deflate the balloon before sleep, and also don't put unnecessary pressure on the host. This also helps in the thaw case: if the freeze fails for whatever reason, the balloon should continue to remain in the inflated state. This was tested by issuing 'swapoff -a' and trying to go into the S4 state. That fails, and the balloon stays inflated, as expected. Both the host and the guest are happy. Finally, in the restore() callback, we empty the list of pages that were previously given off to the host, add the appropriate number of pages to the totalram_pages counter, reset the num_pages counter to 0, and all is fine. As a last step, delete the vqs on the freeze callback to prepare for hibernation, and re-create them in the restore and thaw callbacks to resume normal operation. The kthread doesn't race with any operations here, since it's frozen before the freeze() call and is thawed after the thaw() and restore() callbacks, so we're safe with that. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2011-12-22 18:28:35 +07:00
.freeze = virtballoon_freeze,
.restore = virtballoon_restore,
#endif
};
module_virtio_driver(virtio_balloon_driver);
MODULE_DEVICE_TABLE(virtio, id_table);
MODULE_DESCRIPTION("Virtio balloon driver");
MODULE_LICENSE("GPL");