AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-26 01:05:37 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
bce85a167b
linux_dsm_epyc7002/arch/mips/kernel/mips-cm.c

462 lines
13 KiB
C
Raw Normal View History

MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
/*
* Copyright (C) 2013 Imagination Technologies
Update MIPS email addresses MIPS will soon not be a part of Imagination Technologies, and as such many @imgtec.com email addresses will no longer be valid. This patch updates the addresses for those who: - Have 10 or more patches in mainline authored using an @imgtec.com email address, or any patches dated within the past year. - Are still with Imagination but leaving as part of the MIPS business unit, as determined from an internal email address list. - Haven't already updated their email address (ie. JamesH) or expressed a desire to be excluded (ie. Maciej). - Acked v2 or earlier of this patch, which leaves Deng-Cheng, Matt & myself. New addresses are of the form firstname.lastname@mips.com, and all verified against an internal email address list. An entry is added to .mailmap for each person such that get_maintainer.pl will report the new addresses rather than @imgtec.com addresses which will soon be dead. Instances of the affected addresses throughout the tree are then mechanically replaced with the new @mips.com address. Signed-off-by: Paul Burton <paul.burton@mips.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Cc: Deng-Cheng Zhu <dengcheng.zhu@mips.com> Acked-by: Dengcheng Zhu <dengcheng.zhu@mips.com> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Matt Redfearn <matt.redfearn@mips.com> Acked-by: Matt Redfearn <matt.redfearn@mips.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-26 07:04:33 +07:00
* Author: Paul Burton <paul.burton@mips.com>
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/errno.h>
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
#include <linux/percpu.h>
#include <linux/spinlock.h>
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
MIPS: CPS: Have asm/mips-cps.h include CM & CPC headers With Coherence Manager (CM) 3.5 information about the topology of the system, which has previously only been available through & accessed from the CM, is now also provided by the Cluster Power Controller (CPC). This includes a new CPC_CONFIG register mirroring GCR_CONFIG, and similarly a new CPC_Cx_CONFIG register mirroring GCR_Cx_CONFIG. In preparation for adjusting functions such as mips_cm_numcores(), which have previously only needed to access the CM, to also access the CPC this patch modifies the way we use the various CPS headers. Rather than having users include asm/mips-cm.h or asm/mips-cpc.h individually we instead have users include asm/mips-cps.h which in turn includes asm/mips-cm.h & asm/mips-cpc.h. This means that users will gain access to both CM & CPC registers by including one header, and most importantly it makes asm/mips-cps.h an ideal location for helper functions which need to access the various components of the CPS. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17015/ Patchwork: https://patchwork.linux-mips.org/patch/17217/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:41 +07:00
#include <asm/mips-cps.h>
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
#include <asm/mipsregs.h>
MIPS: CM: Rename mips_cm_base to mips_gcr_base We currently have a mips_cm_base variable which holds the base address of the Coherence Manager (CM) Global Configuration Registers (GCRs), and accessor functions which use the GCR in their names. This works fine, but gets in the way of sharing the code to generate the accessor functions with other blocks (ie. CPC & GIC) because that code would then need to separately handle the name of the base address variable & the name used in the accessor functions. In order to prepare for sharing the accessor generation code between CM, CPC & GIC code this patch renames mips_cm_base to mips_gcr_base such that the "gcr" portion is common to both the base address variable & the accessor function names. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16999/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:25 +07:00
void __iomem *mips_gcr_base;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
void __iomem *mips_cm_l2sync_base;
MIPS: mips-cm: Extend CM accessors for 64-bit CPUs Previously, the CM accessors were only accessing CM registers as u32 types instead of using the native CM register with. However, newer CMs may actually be 64-bit on MIPS64 cores. Fortunately, current 64-bit CMs (CM3) hold all the useful configuration bits in the lower half of the 64-bit registers (at least most of them) so they can still be accessed using the current 32-bit accessors. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-14 15:14:12 +07:00
int mips_cm_is64;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
static char *cm2_tr[8] = {
"mem", "gcr", "gic", "mmio",
"0x04", "cpc", "0x06", "0x07"
};
MIPS: Fix misspellings in comments. Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: linux-mips@linux-mips.org Cc: trivial@kernel.org Patchwork: https://patchwork.linux-mips.org/patch/12617/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-02-25 15:44:58 +07:00
/* CM3 Tag ECC transaction type */
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
static char *cm3_tr[16] = {
[0x0] = "ReqNoData",
[0x1] = "0x1",
[0x2] = "ReqWData",
[0x3] = "0x3",
[0x4] = "IReqNoResp",
[0x5] = "IReqWResp",
[0x6] = "IReqNoRespDat",
[0x7] = "IReqWRespDat",
[0x8] = "RespNoData",
[0x9] = "RespDataFol",
[0xa] = "RespWData",
[0xb] = "RespDataOnly",
[0xc] = "IRespNoData",
[0xd] = "IRespDataFol",
[0xe] = "IRespWData",
[0xf] = "IRespDataOnly"
};
static char *cm2_cmd[32] = {
[0x00] = "0x00",
[0x01] = "Legacy Write",
[0x02] = "Legacy Read",
[0x03] = "0x03",
[0x04] = "0x04",
[0x05] = "0x05",
[0x06] = "0x06",
[0x07] = "0x07",
[0x08] = "Coherent Read Own",
[0x09] = "Coherent Read Share",
[0x0a] = "Coherent Read Discard",
[0x0b] = "Coherent Ready Share Always",
[0x0c] = "Coherent Upgrade",
[0x0d] = "Coherent Writeback",
[0x0e] = "0x0e",
[0x0f] = "0x0f",
[0x10] = "Coherent Copyback",
[0x11] = "Coherent Copyback Invalidate",
[0x12] = "Coherent Invalidate",
[0x13] = "Coherent Write Invalidate",
[0x14] = "Coherent Completion Sync",
[0x15] = "0x15",
[0x16] = "0x16",
[0x17] = "0x17",
[0x18] = "0x18",
[0x19] = "0x19",
[0x1a] = "0x1a",
[0x1b] = "0x1b",
[0x1c] = "0x1c",
[0x1d] = "0x1d",
[0x1e] = "0x1e",
[0x1f] = "0x1f"
};
/* CM3 Tag ECC command type */
static char *cm3_cmd[16] = {
[0x0] = "Legacy Read",
[0x1] = "Legacy Write",
[0x2] = "Coherent Read Own",
[0x3] = "Coherent Read Share",
[0x4] = "Coherent Read Discard",
[0x5] = "Coherent Evicted",
[0x6] = "Coherent Upgrade",
[0x7] = "Coherent Upgrade for Store Conditional",
[0x8] = "Coherent Writeback",
[0x9] = "Coherent Write Invalidate",
[0xa] = "0xa",
[0xb] = "0xb",
[0xc] = "0xc",
[0xd] = "0xd",
[0xe] = "0xe",
[0xf] = "0xf"
};
/* CM3 Tag ECC command group */
static char *cm3_cmd_group[8] = {
[0x0] = "Normal",
[0x1] = "Registers",
[0x2] = "TLB",
[0x3] = "0x3",
[0x4] = "L1I",
[0x5] = "L1D",
[0x6] = "L3",
[0x7] = "L2"
};
static char *cm2_core[8] = {
"Invalid/OK", "Invalid/Data",
"Shared/OK", "Shared/Data",
"Modified/OK", "Modified/Data",
"Exclusive/OK", "Exclusive/Data"
};
static char *cm2_causes[32] = {
"None", "GC_WR_ERR", "GC_RD_ERR", "COH_WR_ERR",
"COH_RD_ERR", "MMIO_WR_ERR", "MMIO_RD_ERR", "0x07",
"0x08", "0x09", "0x0a", "0x0b",
"0x0c", "0x0d", "0x0e", "0x0f",
"0x10", "0x11", "0x12", "0x13",
"0x14", "0x15", "0x16", "INTVN_WR_ERR",
"INTVN_RD_ERR", "0x19", "0x1a", "0x1b",
"0x1c", "0x1d", "0x1e", "0x1f"
};
static char *cm3_causes[32] = {
"0x0", "MP_CORRECTABLE_ECC_ERR", "MP_REQUEST_DECODE_ERR",
"MP_UNCORRECTABLE_ECC_ERR", "MP_PARITY_ERR", "MP_COHERENCE_ERR",
"CMBIU_REQUEST_DECODE_ERR", "CMBIU_PARITY_ERR", "CMBIU_AXI_RESP_ERR",
"0x9", "RBI_BUS_ERR", "0xb", "0xc", "0xd", "0xe", "0xf", "0x10",
"0x11", "0x12", "0x13", "0x14", "0x15", "0x16", "0x17", "0x18",
"0x19", "0x1a", "0x1b", "0x1c", "0x1d", "0x1e", "0x1f"
};
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
static DEFINE_PER_CPU_ALIGNED(spinlock_t, cm_core_lock);
static DEFINE_PER_CPU_ALIGNED(unsigned long, cm_core_lock_flags);
MIPS: Replace use of phys_t with phys_addr_t. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-22 06:22:09 +07:00
phys_addr_t __mips_cm_phys_base(void)
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
{
u32 config3 = read_c0_config3();
MIPS: CM: The CMGCRBase register is 64-bit on 64 bit kernels. The CMGCRBase register (CP0, 15, 3) register is 64-bit on MIPS64 so we change its type to unsigned long. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10644/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:45 +07:00
unsigned long cmgcr;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
/* Check the CMGCRBase register is implemented */
if (!(config3 & MIPS_CONF3_CMGCR))
return 0;
/* Read the address from CMGCRBase */
cmgcr = read_c0_cmgcrbase();
return (cmgcr & MIPS_CMGCRF_BASE) << (36 - 32);
}
MIPS: Replace use of phys_t with phys_addr_t. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-22 06:22:09 +07:00
phys_addr_t mips_cm_phys_base(void)
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
__attribute__((weak, alias("__mips_cm_phys_base")));
MIPS: Replace use of phys_t with phys_addr_t. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-22 06:22:09 +07:00
phys_addr_t __mips_cm_l2sync_phys_base(void)
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
{
u32 base_reg;
/*
* If the L2-only sync region is already enabled then leave it at it's
* current location.
*/
base_reg = read_gcr_l2_only_sync_base();
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
if (base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN)
return base_reg & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
/* Default to following the CM */
return mips_cm_phys_base() + MIPS_CM_GCR_SIZE;
}
MIPS: Replace use of phys_t with phys_addr_t. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-22 06:22:09 +07:00
phys_addr_t mips_cm_l2sync_phys_base(void)
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
__attribute__((weak, alias("__mips_cm_l2sync_phys_base")));
static void mips_cm_probe_l2sync(void)
{
unsigned major_rev;
MIPS: Replace use of phys_t with phys_addr_t. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-22 06:22:09 +07:00
phys_addr_t addr;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
/* L2-only sync was introduced with CM major revision 6 */
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
major_rev = (read_gcr_rev() & CM_GCR_REV_MAJOR) >>
__ffs(CM_GCR_REV_MAJOR);
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
if (major_rev < 6)
return;
/* Find a location for the L2 sync region */
addr = mips_cm_l2sync_phys_base();
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
BUG_ON((addr & CM_GCR_L2_ONLY_SYNC_BASE_SYNCBASE) != addr);
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
if (!addr)
return;
/* Set the region base address & enable it */
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
write_gcr_l2_only_sync_base(addr | CM_GCR_L2_ONLY_SYNC_BASE_SYNCEN);
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
/* Map the region */
mips_cm_l2sync_base = ioremap_nocache(addr, MIPS_CM_L2SYNC_SIZE);
}
int mips_cm_probe(void)
{
MIPS: Replace use of phys_t with phys_addr_t. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-11-22 06:22:09 +07:00
phys_addr_t addr;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
u32 base_reg;
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
unsigned cpu;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
MIPS: Add platform callback before initializing the L2 cache Allow platforms to perform platform-specific steps before configuring the L2 cache. This is necessary for platforms with CM3 since the L2 parameters no longer live in the Config2 register. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10642/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:43 +07:00
/*
* No need to probe again if we have already been
* here before.
*/
MIPS: CM: Rename mips_cm_base to mips_gcr_base We currently have a mips_cm_base variable which holds the base address of the Coherence Manager (CM) Global Configuration Registers (GCRs), and accessor functions which use the GCR in their names. This works fine, but gets in the way of sharing the code to generate the accessor functions with other blocks (ie. CPC & GIC) because that code would then need to separately handle the name of the base address variable & the name used in the accessor functions. In order to prepare for sharing the accessor generation code between CM, CPC & GIC code this patch renames mips_cm_base to mips_gcr_base such that the "gcr" portion is common to both the base address variable & the accessor function names. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16999/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:25 +07:00
if (mips_gcr_base)
MIPS: Add platform callback before initializing the L2 cache Allow platforms to perform platform-specific steps before configuring the L2 cache. This is necessary for platforms with CM3 since the L2 parameters no longer live in the Config2 register. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10642/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:43 +07:00
return 0;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
addr = mips_cm_phys_base();
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
BUG_ON((addr & CM_GCR_BASE_GCRBASE) != addr);
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
if (!addr)
return -ENODEV;
MIPS: CM: Rename mips_cm_base to mips_gcr_base We currently have a mips_cm_base variable which holds the base address of the Coherence Manager (CM) Global Configuration Registers (GCRs), and accessor functions which use the GCR in their names. This works fine, but gets in the way of sharing the code to generate the accessor functions with other blocks (ie. CPC & GIC) because that code would then need to separately handle the name of the base address variable & the name used in the accessor functions. In order to prepare for sharing the accessor generation code between CM, CPC & GIC code this patch renames mips_cm_base to mips_gcr_base such that the "gcr" portion is common to both the base address variable & the accessor function names. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16999/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:25 +07:00
mips_gcr_base = ioremap_nocache(addr, MIPS_CM_GCR_SIZE);
if (!mips_gcr_base)
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
return -ENXIO;
/* sanity check that we're looking at a CM */
base_reg = read_gcr_base();
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
if ((base_reg & CM_GCR_BASE_GCRBASE) != addr) {
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
pr_err("GCRs appear to have been moved (expected them at 0x%08lx)!\n",
(unsigned long)addr);
MIPS: CM: Rename mips_cm_base to mips_gcr_base We currently have a mips_cm_base variable which holds the base address of the Coherence Manager (CM) Global Configuration Registers (GCRs), and accessor functions which use the GCR in their names. This works fine, but gets in the way of sharing the code to generate the accessor functions with other blocks (ie. CPC & GIC) because that code would then need to separately handle the name of the base address variable & the name used in the accessor functions. In order to prepare for sharing the accessor generation code between CM, CPC & GIC code this patch renames mips_cm_base to mips_gcr_base such that the "gcr" portion is common to both the base address variable & the accessor function names. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16999/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:25 +07:00
mips_gcr_base = NULL;
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
return -ENODEV;
}
/* set default target to memory */
MIPS: CPS: Use change_*, set_* & clear_* where appropriate Make use of the new change_*, set_* & clear_* accessor functions for CPS (CM, CPC & GIC) registers where doing so makes the code easier to read or shortens it without adversely affecting readability. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17005/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:31 +07:00
change_gcr_base(CM_GCR_BASE_CMDEFTGT, CM_GCR_BASE_CMDEFTGT_MEM);
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
/* disable CM regions */
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
write_gcr_reg0_base(CM_GCR_REGn_BASE_BASEADDR);
write_gcr_reg0_mask(CM_GCR_REGn_MASK_ADDRMASK);
write_gcr_reg1_base(CM_GCR_REGn_BASE_BASEADDR);
write_gcr_reg1_mask(CM_GCR_REGn_MASK_ADDRMASK);
write_gcr_reg2_base(CM_GCR_REGn_BASE_BASEADDR);
write_gcr_reg2_mask(CM_GCR_REGn_MASK_ADDRMASK);
write_gcr_reg3_base(CM_GCR_REGn_BASE_BASEADDR);
write_gcr_reg3_mask(CM_GCR_REGn_MASK_ADDRMASK);
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
/* probe for an L2-only sync region */
mips_cm_probe_l2sync();
MIPS: mips-cm: Extend CM accessors for 64-bit CPUs Previously, the CM accessors were only accessing CM registers as u32 types instead of using the native CM register with. However, newer CMs may actually be 64-bit on MIPS64 cores. Fortunately, current 64-bit CMs (CM3) hold all the useful configuration bits in the lower half of the 64-bit registers (at least most of them) so they can still be accessed using the current 32-bit accessors. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-14 15:14:12 +07:00
/* determine register width for this CM */
tree-wide: replace config_enabled() with IS_ENABLED() The use of config_enabled() against config options is ambiguous. In practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the author might have used it for the meaning of IS_ENABLED(). Using IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc. makes the intention clearer. This commit replaces config_enabled() with IS_ENABLED() where possible. This commit is only touching bool config options. I noticed two cases where config_enabled() is used against a tristate option: - config_enabled(CONFIG_HWMON) [ drivers/net/wireless/ath/ath10k/thermal.c ] - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE) [ drivers/gpu/drm/gma500/opregion.c ] I did not touch them because they should be converted to IS_BUILTIN() in order to keep the logic, but I was not sure it was the authors' intention. Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Stas Sergeev <stsp@list.ru> Cc: Matt Redfearn <matt.redfearn@imgtec.com> Cc: Joshua Kinard <kumba@gentoo.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Borislav Petkov <bp@suse.de> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: "Dmitry V. Levin" <ldv@altlinux.org> Cc: yu-cheng yu <yu-cheng.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Brian Gerst <brgerst@gmail.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Will Drewry <wad@chromium.org> Cc: Nikolay Martynov <mar.kolya@gmail.com> Cc: Huacai Chen <chenhc@lemote.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Cc: Rafal Milecki <zajec5@gmail.com> Cc: James Cowgill <James.Cowgill@imgtec.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Alex Smith <alex.smith@imgtec.com> Cc: Adam Buchbinder <adam.buchbinder@gmail.com> Cc: Qais Yousef <qais.yousef@imgtec.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Mikko Rapeli <mikko.rapeli@iki.fi> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Roland McGrath <roland@hack.frob.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Tony Wu <tung7970@gmail.com> Cc: Huaitong Han <huaitong.han@intel.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Juergen Gross <jgross@suse.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Gelmini <andrea.gelmini@gelma.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Rabin Vincent <rabin@rab.in> Cc: "Maciej W. Rozycki" <macro@imgtec.com> Cc: David Daney <david.daney@cavium.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-04 03:45:50 +07:00
mips_cm_is64 = IS_ENABLED(CONFIG_64BIT) && (mips_cm_revision() >= CM_REV_CM3);
MIPS: mips-cm: Extend CM accessors for 64-bit CPUs Previously, the CM accessors were only accessing CM registers as u32 types instead of using the native CM register with. However, newer CMs may actually be 64-bit on MIPS64 cores. Fortunately, current 64-bit CMs (CM3) hold all the useful configuration bits in the lower half of the 64-bit registers (at least most of them) so they can still be accessed using the current 32-bit accessors. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Bresticker <abrestic@chromium.org> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-14 15:14:12 +07:00
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
for_each_possible_cpu(cpu)
spin_lock_init(&per_cpu(cm_core_lock, cpu));
MIPS: Add generic CM probe & access code The kernel currently only probes for a MIPS Coherence Manager in the Malta interrupt code in order to detect & enable the GIC. However CM is not Malta-specific, so this should really be more generic. This patch introduces some non-Malta-specific code which probes for a CM and performs some basic initialisation. A new header, with temporarily duplicated register definitions, is introduced in order to: 1) Allow the new definitions to be correct with regards to the CM documentation, as many of those in gcmpregs.h aren't. 2) Allow switching away from the REG() macro used via a few layers of nested macros in order to access registers in gcmpregs.h. This patch instead introduced accessor functions akin to the {read,write}_c0_* functions used for cop0 registers. 3) Allow users of the CM to be migrated one by one. 4) Switch from the name 'GCMP' to 'CM' since the Coherence Manager is what this code is actually dealing with. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/6360/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2014-01-15 17:31:51 +07:00
return 0;
}
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
MIPS: CM: Add cluster & block args to mips_cm_lock_other() With CM >= 3.5 we have the notion of multiple clusters & can access their CM, CPC & GIC registers via the apporpriate redirect/other register blocks. In order to allow for this introduce cluster & block arguments to mips_cm_lock_other() which configures the redirect/other region to point at the appropriate cluster, core, VP & register block. Since we now have 4 arguments to mips_cm_lock_other() & a common use is likely to be to target the cluster, core & VP corresponding to a particular Linux CPU number we also add a new mips_cm_lock_other_cpu() helper function which handles that without the caller needing to manually pull out the cluster, core & VP numbers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:39 +07:00
void mips_cm_lock_other(unsigned int cluster, unsigned int core,
unsigned int vp, unsigned int block)
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
{
MIPS: CM: Add cluster & block args to mips_cm_lock_other() With CM >= 3.5 we have the notion of multiple clusters & can access their CM, CPC & GIC registers via the apporpriate redirect/other register blocks. In order to allow for this introduce cluster & block arguments to mips_cm_lock_other() which configures the redirect/other region to point at the appropriate cluster, core, VP & register block. Since we now have 4 arguments to mips_cm_lock_other() & a common use is likely to be to target the cluster, core & VP corresponding to a particular Linux CPU number we also add a new mips_cm_lock_other_cpu() helper function which handles that without the caller needing to manually pull out the cluster, core & VP numbers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:39 +07:00
unsigned int curr_core, cm_rev;
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
u32 val;
MIPS: CM: Add cluster & block args to mips_cm_lock_other() With CM >= 3.5 we have the notion of multiple clusters & can access their CM, CPC & GIC registers via the apporpriate redirect/other register blocks. In order to allow for this introduce cluster & block arguments to mips_cm_lock_other() which configures the redirect/other region to point at the appropriate cluster, core, VP & register block. Since we now have 4 arguments to mips_cm_lock_other() & a common use is likely to be to target the cluster, core & VP corresponding to a particular Linux CPU number we also add a new mips_cm_lock_other_cpu() helper function which handles that without the caller needing to manually pull out the cluster, core & VP numbers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:39 +07:00
cm_rev = mips_cm_revision();
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
preempt_disable();
MIPS: CM: Add cluster & block args to mips_cm_lock_other() With CM >= 3.5 we have the notion of multiple clusters & can access their CM, CPC & GIC registers via the apporpriate redirect/other register blocks. In order to allow for this introduce cluster & block arguments to mips_cm_lock_other() which configures the redirect/other region to point at the appropriate cluster, core, VP & register block. Since we now have 4 arguments to mips_cm_lock_other() & a common use is likely to be to target the cluster, core & VP corresponding to a particular Linux CPU number we also add a new mips_cm_lock_other_cpu() helper function which handles that without the caller needing to manually pull out the cluster, core & VP numbers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:39 +07:00
if (cm_rev >= CM_REV_CM3) {
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
val = core << __ffs(CM3_GCR_Cx_OTHER_CORE);
val |= vp << __ffs(CM3_GCR_Cx_OTHER_VP);
MIPS: CM: Avoid per-core locking with CM3 & higher CM3 provides a GCR_CL_OTHER register per VP, rather than only per core. This means that we don't need to prevent other VPs within a core from racing with code that makes use of the core-other register region. Reduce locking overhead by demoting the per-core spinlock providing protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 & higher. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16193/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 04:48:50 +07:00
MIPS: CM: Add cluster & block args to mips_cm_lock_other() With CM >= 3.5 we have the notion of multiple clusters & can access their CM, CPC & GIC registers via the apporpriate redirect/other register blocks. In order to allow for this introduce cluster & block arguments to mips_cm_lock_other() which configures the redirect/other region to point at the appropriate cluster, core, VP & register block. Since we now have 4 arguments to mips_cm_lock_other() & a common use is likely to be to target the cluster, core & VP corresponding to a particular Linux CPU number we also add a new mips_cm_lock_other_cpu() helper function which handles that without the caller needing to manually pull out the cluster, core & VP numbers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:39 +07:00
if (cm_rev >= CM_REV_CM3_5) {
val |= CM_GCR_Cx_OTHER_CLUSTER_EN;
val |= cluster << __ffs(CM_GCR_Cx_OTHER_CLUSTER);
val |= block << __ffs(CM_GCR_Cx_OTHER_BLOCK);
} else {
WARN_ON(cluster != 0);
WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
}
MIPS: CM: Avoid per-core locking with CM3 & higher CM3 provides a GCR_CL_OTHER register per VP, rather than only per core. This means that we don't need to prevent other VPs within a core from racing with code that makes use of the core-other register region. Reduce locking overhead by demoting the per-core spinlock providing protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 & higher. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16193/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 04:48:50 +07:00
/*
* We need to disable interrupts in SMP systems in order to
* ensure that we don't interrupt the caller with code which
* may modify the redirect register. We do so here in a
* slightly obscure way by using a spin lock, since this has
* the neat property of also catching any nested uses of
* mips_cm_lock_other() leading to a deadlock or a nice warning
* with lockdep enabled.
*/
spin_lock_irqsave(this_cpu_ptr(&cm_core_lock),
*this_cpu_ptr(&cm_core_lock_flags));
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
} else {
MIPS: CM: Add cluster & block args to mips_cm_lock_other() With CM >= 3.5 we have the notion of multiple clusters & can access their CM, CPC & GIC registers via the apporpriate redirect/other register blocks. In order to allow for this introduce cluster & block arguments to mips_cm_lock_other() which configures the redirect/other region to point at the appropriate cluster, core, VP & register block. Since we now have 4 arguments to mips_cm_lock_other() & a common use is likely to be to target the cluster, core & VP corresponding to a particular Linux CPU number we also add a new mips_cm_lock_other_cpu() helper function which handles that without the caller needing to manually pull out the cluster, core & VP numbers. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17013/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:39 +07:00
WARN_ON(cluster != 0);
WARN_ON(block != CM_GCR_Cx_OTHER_BLOCK_LOCAL);
MIPS: CM: Avoid per-core locking with CM3 & higher CM3 provides a GCR_CL_OTHER register per VP, rather than only per core. This means that we don't need to prevent other VPs within a core from racing with code that makes use of the core-other register region. Reduce locking overhead by demoting the per-core spinlock providing protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 & higher. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16193/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 04:48:50 +07:00
/*
* We only have a GCR_CL_OTHER per core in systems with
* CM 2.5 & older, so have to ensure other VP(E)s don't
* race with us.
*/
MIPS: Abstract CPU core & VP(E) ID access through accessor functions We currently have fields in struct cpuinfo_mips for the core & VP(E) ID of a particular CPU, and various pieces of code directly access those fields. This patch abstracts such access by introducing accessor functions cpu_core(), cpu_set_core(), cpu_vpe_id() & cpu_set_vpe_id() and having code that needs to access these values call those functions rather than directly accessing the struct cpuinfo_mips fields. This prepares us for changes to the way in which those values are stored in later patches. The cpu_vpe_id() function is introduced even though we already had a cpu_vpe_id() macro for a couple of reasons: 1) It's more consistent with the core, and future cluster, accessors. 2) It ensures a sensible return type without explicit casts. 3) It's generally preferable to use functions rather than macros. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:35 +07:00
curr_core = cpu_core(&current_cpu_data);
MIPS: CM: Avoid per-core locking with CM3 & higher CM3 provides a GCR_CL_OTHER register per VP, rather than only per core. This means that we don't need to prevent other VPs within a core from racing with code that makes use of the core-other register region. Reduce locking overhead by demoting the per-core spinlock providing protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 & higher. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16193/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 04:48:50 +07:00
spin_lock_irqsave(&per_cpu(cm_core_lock, curr_core),
per_cpu(cm_core_lock_flags, curr_core));
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
val = core << __ffs(CM_GCR_Cx_OTHER_CORENUM);
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
}
write_gcr_cl_other(val);
MIPS: CM, CPC: Ensure core-other GCRs reflect the correct core Ensure the update to which core the core-other GCR regions reflect has taken place before any core-other GCRs are accessed by placing a memory barrier (sync instruction) between the write to the core-other registers and any such GCR accesses. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: linux-kernel@vger.kernel.org Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11209/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:18 +07:00
/*
* Ensure the core-other region reflects the appropriate core &
* VP before any accesses to it occur.
*/
mb();
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
}
void mips_cm_unlock_other(void)
{
MIPS: CM: Avoid per-core locking with CM3 & higher CM3 provides a GCR_CL_OTHER register per VP, rather than only per core. This means that we don't need to prevent other VPs within a core from racing with code that makes use of the core-other register region. Reduce locking overhead by demoting the per-core spinlock providing protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 & higher. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16193/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 04:48:50 +07:00
unsigned int curr_core;
if (mips_cm_revision() < CM_REV_CM3) {
MIPS: Abstract CPU core & VP(E) ID access through accessor functions We currently have fields in struct cpuinfo_mips for the core & VP(E) ID of a particular CPU, and various pieces of code directly access those fields. This patch abstracts such access by introducing accessor functions cpu_core(), cpu_set_core(), cpu_vpe_id() & cpu_set_vpe_id() and having code that needs to access these values call those functions rather than directly accessing the struct cpuinfo_mips fields. This prepares us for changes to the way in which those values are stored in later patches. The cpu_vpe_id() function is introduced even though we already had a cpu_vpe_id() macro for a couple of reasons: 1) It's more consistent with the core, and future cluster, accessors. 2) It ensures a sensible return type without explicit casts. 3) It's generally preferable to use functions rather than macros. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17009/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:35 +07:00
curr_core = cpu_core(&current_cpu_data);
MIPS: CM: Avoid per-core locking with CM3 & higher CM3 provides a GCR_CL_OTHER register per VP, rather than only per core. This means that we don't need to prevent other VPs within a core from racing with code that makes use of the core-other register region. Reduce locking overhead by demoting the per-core spinlock providing protection for CM2.5 & lower to a per-CPU/per-VP spinlock for CM3 & higher. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16193/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-06-03 04:48:50 +07:00
spin_unlock_irqrestore(&per_cpu(cm_core_lock, curr_core),
per_cpu(cm_core_lock_flags, curr_core));
} else {
spin_unlock_irqrestore(this_cpu_ptr(&cm_core_lock),
*this_cpu_ptr(&cm_core_lock_flags));
}
MIPS: CM: Introduce core-other locking functions Introduce mips_cm_lock_other & mips_cm_unlock_other, mirroring the existing CPC equivalents, in order to lock access from the current core to another via the core-other GCR region. This hasn't been required in the past but with CM3 the CPC starts using GCR_CL_OTHER rather than CPC_CL_OTHER and this will be required for safety. [ralf@linux-mips.org: Fix merge conflict.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11207/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 01:12:16 +07:00
preempt_enable();
}
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
void mips_cm_error_report(void)
{
MIPS: Always read full 64 bit CM error GCRs for CM3 CM3 has 64 bit GCR_ERROR_* registers, but the code in mips_cm_error_report was previously only reading 32 bits of it in MIPS32 kernels. Fix by splitting the reads for CM2 & CM3, and making use of the read64_ variants of the accessor function for CM3. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:41 +07:00
u64 cm_error, cm_addr, cm_other;
unsigned long revision;
int ocause, cause;
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
char buf[256];
if (!mips_cm_present())
return;
MIPS: Don't read GCRs when a CM is not present Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors") leads to Malta boards unconditionally reading CM GCRs upon bus errors, regardless of whether a CM is present. This is incorrect & will lead to further exceptions. Fix by moving the GCR reads to after the check for whether a CM is present. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11186/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:38 +07:00
revision = mips_cm_revision();
MIPS: CM: Specify register size when generating accessors Some CM registers are always 32 bits, or at least only use bits in the lower 32 bits of the register. For these registers it is wasteful for us to generate accessors which bother to check mips_cm_is64 & perform 64 bit accesses. This patch modifies the accessor generation to take into account the size of the register, and for 32 bit registers we generate accessors which only ever perform 32 bit accesses. For 64 bit registers we either perform a 64 bit access or two 32 bit accesses, depending upon the value of mips_cm_is64. Doing this saves us ~1.5KiB of code in a generic 64r6el kernel, and perhaps more importantly simplifies various code paths. This removes the read64_gcr_* accessors, so mips_cm_error_report() is modified to stop using them & instead use the regular read_gcr_* accessors which will return 64 bit values from the 64 bit registers. The new accessor macros are placed in asm/mips-cps.h such that they can be shared by CPC & GIC code in later patches. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17000/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:26 +07:00
cm_error = read_gcr_error_cause();
cm_addr = read_gcr_error_addr();
cm_other = read_gcr_error_mult();
MIPS: Don't read GCRs when a CM is not present Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors") leads to Malta boards unconditionally reading CM GCRs upon bus errors, regardless of whether a CM is present. This is incorrect & will lead to further exceptions. Fix by moving the GCR reads to after the check for whether a CM is present. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11186/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:38 +07:00
MIPS: Always read full 64 bit CM error GCRs for CM3 CM3 has 64 bit GCR_ERROR_* registers, but the code in mips_cm_error_report was previously only reading 32 bits of it in MIPS32 kernels. Fix by splitting the reads for CM2 & CM3, and making use of the read64_ variants of the accessor function for CM3. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:41 +07:00
if (revision < CM_REV_CM3) { /* CM2 */
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
cause = cm_error >> __ffs(CM_GCR_ERROR_CAUSE_ERRTYPE);
ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
MIPS: Always read full 64 bit CM error GCRs for CM3 CM3 has 64 bit GCR_ERROR_* registers, but the code in mips_cm_error_report was previously only reading 32 bits of it in MIPS32 kernels. Fix by splitting the reads for CM2 & CM3, and making use of the read64_ variants of the accessor function for CM3. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:41 +07:00
if (!cause)
return;
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
if (cause < 16) {
unsigned long cca_bits = (cm_error >> 15) & 7;
unsigned long tr_bits = (cm_error >> 12) & 7;
unsigned long cmd_bits = (cm_error >> 7) & 0x1f;
unsigned long stag_bits = (cm_error >> 3) & 15;
unsigned long sport_bits = (cm_error >> 0) & 7;
snprintf(buf, sizeof(buf),
"CCA=%lu TR=%s MCmd=%s STag=%lu "
"SPort=%lu\n", cca_bits, cm2_tr[tr_bits],
cm2_cmd[cmd_bits], stag_bits, sport_bits);
} else {
/* glob state & sresp together */
unsigned long c3_bits = (cm_error >> 18) & 7;
unsigned long c2_bits = (cm_error >> 15) & 7;
unsigned long c1_bits = (cm_error >> 12) & 7;
unsigned long c0_bits = (cm_error >> 9) & 7;
unsigned long sc_bit = (cm_error >> 8) & 1;
unsigned long cmd_bits = (cm_error >> 3) & 0x1f;
unsigned long sport_bits = (cm_error >> 0) & 7;
snprintf(buf, sizeof(buf),
"C3=%s C2=%s C1=%s C0=%s SC=%s "
"MCmd=%s SPort=%lu\n",
cm2_core[c3_bits], cm2_core[c2_bits],
cm2_core[c1_bits], cm2_core[c0_bits],
sc_bit ? "True" : "False",
cm2_cmd[cmd_bits], sport_bits);
}
pr_err("CM_ERROR=%08llx %s <%s>\n", cm_error,
cm2_causes[cause], buf);
MIPS: Always read full 64 bit CM error GCRs for CM3 CM3 has 64 bit GCR_ERROR_* registers, but the code in mips_cm_error_report was previously only reading 32 bits of it in MIPS32 kernels. Fix by splitting the reads for CM2 & CM3, and making use of the read64_ variants of the accessor function for CM3. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:41 +07:00
pr_err("CM_ADDR =%08llx\n", cm_addr);
pr_err("CM_OTHER=%08llx %s\n", cm_other, cm2_causes[ocause]);
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
} else { /* CM3 */
MIPS: Always read full 64 bit CM error GCRs for CM3 CM3 has 64 bit GCR_ERROR_* registers, but the code in mips_cm_error_report was previously only reading 32 bits of it in MIPS32 kernels. Fix by splitting the reads for CM2 & CM3, and making use of the read64_ variants of the accessor function for CM3. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:41 +07:00
ulong core_id_bits, vp_id_bits, cmd_bits, cmd_group_bits;
ulong cm3_cca_bits, mcp_bits, cm3_tr_bits, sched_bit;
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 09:49:27 +07:00
cause = cm_error >> __ffs64(CM3_GCR_ERROR_CAUSE_ERRTYPE);
ocause = cm_other >> __ffs(CM_GCR_ERROR_MULT_ERR2ND);
MIPS: Always read full 64 bit CM error GCRs for CM3 CM3 has 64 bit GCR_ERROR_* registers, but the code in mips_cm_error_report was previously only reading 32 bits of it in MIPS32 kernels. Fix by splitting the reads for CM2 & CM3, and making use of the read64_ variants of the accessor function for CM3. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:41 +07:00
if (!cause)
return;
/* Used by cause == {1,2,3} */
core_id_bits = (cm_error >> 22) & 0xf;
vp_id_bits = (cm_error >> 18) & 0xf;
cmd_bits = (cm_error >> 14) & 0xf;
cmd_group_bits = (cm_error >> 11) & 0xf;
cm3_cca_bits = (cm_error >> 8) & 7;
mcp_bits = (cm_error >> 5) & 0xf;
cm3_tr_bits = (cm_error >> 1) & 0xf;
sched_bit = cm_error & 0x1;
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
if (cause == 1 || cause == 3) { /* Tag ECC */
unsigned long tag_ecc = (cm_error >> 57) & 0x1;
unsigned long tag_way_bits = (cm_error >> 29) & 0xffff;
unsigned long dword_bits = (cm_error >> 49) & 0xff;
unsigned long data_way_bits = (cm_error >> 45) & 0xf;
unsigned long data_sets_bits = (cm_error >> 29) & 0xfff;
unsigned long bank_bit = (cm_error >> 28) & 0x1;
snprintf(buf, sizeof(buf),
"%s ECC Error: Way=%lu (DWORD=%lu, Sets=%lu)"
"Bank=%lu CoreID=%lu VPID=%lu Command=%s"
"Command Group=%s CCA=%lu MCP=%d"
"Transaction type=%s Scheduler=%lu\n",
tag_ecc ? "TAG" : "DATA",
tag_ecc ? (unsigned long)ffs(tag_way_bits) - 1 :
data_way_bits, bank_bit, dword_bits,
data_sets_bits,
core_id_bits, vp_id_bits,
cm3_cmd[cmd_bits],
cm3_cmd_group[cmd_group_bits],
cm3_cca_bits, 1 << mcp_bits,
cm3_tr[cm3_tr_bits], sched_bit);
} else if (cause == 2) {
unsigned long data_error_type = (cm_error >> 41) & 0xfff;
unsigned long data_decode_cmd = (cm_error >> 37) & 0xf;
unsigned long data_decode_group = (cm_error >> 34) & 0x7;
unsigned long data_decode_destination_id = (cm_error >> 28) & 0x3f;
snprintf(buf, sizeof(buf),
"Decode Request Error: Type=%lu, Command=%lu"
"Command Group=%lu Destination ID=%lu"
"CoreID=%lu VPID=%lu Command=%s"
"Command Group=%s CCA=%lu MCP=%d"
"Transaction type=%s Scheduler=%lu\n",
data_error_type, data_decode_cmd,
data_decode_group, data_decode_destination_id,
core_id_bits, vp_id_bits,
cm3_cmd[cmd_bits],
cm3_cmd_group[cmd_group_bits],
cm3_cca_bits, 1 << mcp_bits,
cm3_tr[cm3_tr_bits], sched_bit);
MIPS: Avoid buffer overrun in mips_cm_error_report Commit 3885c2b463f6 ("MIPS: CM: Add support for reporting CM cache errors") added cases for decoding errors reported by CM3, but leaves the buf variable which is printed as a string uninitialised for cause values other than 1, 2 or 3. Fix by ensuring the buf variable is initialised to an empty string in such cases. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/11187/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:39 +07:00
} else {
buf[0] = 0;
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
}
pr_err("CM_ERROR=%llx %s <%s>\n", cm_error,
cm3_causes[cause], buf);
MIPS: Always read full 64 bit CM error GCRs for CM3 CM3 has 64 bit GCR_ERROR_* registers, but the code in mips_cm_error_report was previously only reading 32 bits of it in MIPS32 kernels. Fix by splitting the reads for CM2 & CM3, and making use of the read64_ variants of the accessor function for CM3. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Patchwork: https://patchwork.linux-mips.org/patch/11189/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-09-23 00:26:41 +07:00
pr_err("CM_ADDR =%llx\n", cm_addr);
pr_err("CM_OTHER=%llx %s\n", cm_other, cm3_causes[ocause]);
MIPS: CM: Add support for reporting CM cache errors The CM cache error reporting code is not Malta specific and as such it should live in the mips-cm.c file. Moreover, CM2 and CM3 differ in the way cache errors are being recorded to the registers so extend the previous code to add support for the CM3 as well. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/10646/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-07-09 16:40:47 +07:00
}
/* reprime cause register */
write_gcr_error_cause(0);
}
Reference in New Issue Copy Permalink