linux_dsm_epyc7002/fs/fcntl.c

1036 lines
23 KiB
C
Raw Normal View History

/*
* linux/fs/fcntl.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
#include <linux/syscalls.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/sched/task.h>
#include <linux/fs.h>
#include <linux/file.h>
#include <linux/fdtable.h>
#include <linux/capability.h>
#include <linux/dnotify.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/pipe_fs_i.h>
#include <linux/security.h>
#include <linux/ptrace.h>
#include <linux/signal.h>
#include <linux/rcupdate.h>
#include <linux/pid_namespace.h>
#include <linux/user_namespace.h>
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
#include <linux/shmem_fs.h>
#include <linux/compat.h>
#include <asm/poll.h>
#include <asm/siginfo.h>
#include <linux/uaccess.h>
#define SETFL_MASK (O_APPEND | O_NONBLOCK | O_NDELAY | O_DIRECT | O_NOATIME)
static int setfl(int fd, struct file * filp, unsigned long arg)
{
struct inode * inode = file_inode(filp);
int error = 0;
/*
* O_APPEND cannot be cleared if the file is marked as append-only
* and the file is open for write.
*/
if (((arg ^ filp->f_flags) & O_APPEND) && IS_APPEND(inode))
return -EPERM;
/* O_NOATIME can only be set by the owner or superuser */
if ((arg & O_NOATIME) && !(filp->f_flags & O_NOATIME))
if (!inode_owner_or_capable(inode))
return -EPERM;
/* required for strict SunOS emulation */
if (O_NONBLOCK != O_NDELAY)
if (arg & O_NDELAY)
arg |= O_NONBLOCK;
/* Pipe packetized mode is controlled by O_DIRECT flag */
if (!S_ISFIFO(inode->i_mode) && (arg & O_DIRECT)) {
if (!filp->f_mapping || !filp->f_mapping->a_ops ||
!filp->f_mapping->a_ops->direct_IO)
return -EINVAL;
}
if (filp->f_op->check_flags)
error = filp->f_op->check_flags(arg);
if (error)
return error;
/*
* ->fasync() is responsible for setting the FASYNC bit.
*/
if (((arg ^ filp->f_flags) & FASYNC) && filp->f_op->fasync) {
error = filp->f_op->fasync(fd, filp, (arg & FASYNC) != 0);
if (error < 0)
goto out;
if (error > 0)
error = 0;
}
spin_lock(&filp->f_lock);
filp->f_flags = (arg & SETFL_MASK) | (filp->f_flags & ~SETFL_MASK);
spin_unlock(&filp->f_lock);
out:
return error;
}
static void f_modown(struct file *filp, struct pid *pid, enum pid_type type,
int force)
{
Fix race in tty_fasync() properly This reverts commit 703625118069 ("tty: fix race in tty_fasync") and commit b04da8bfdfbb ("fnctl: f_modown should call write_lock_irqsave/ restore") that tried to fix up some of the fallout but was incomplete. It turns out that we really cannot hold 'tty->ctrl_lock' over calling __f_setown, because not only did that cause problems with interrupt disables (which the second commit fixed), it also causes a potential ABBA deadlock due to lock ordering. Thanks to Tetsuo Handa for following up on the issue, and running lockdep to show the problem. It goes roughly like this: - f_getown gets filp->f_owner.lock for reading without interrupts disabled, so an interrupt that happens while that lock is held can cause a lockdep chain from f_owner.lock -> sighand->siglock. - at the same time, the tty->ctrl_lock -> f_owner.lock chain that commit 703625118069 introduced, together with the pre-existing sighand->siglock -> tty->ctrl_lock chain means that we have a lock dependency the other way too. So instead of extending tty->ctrl_lock over the whole __f_setown() call, we now just take a reference to the 'pid' structure while holding the lock, and then release it after having done the __f_setown. That still guarantees that 'struct pid' won't go away from under us, which is all we really ever needed. Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Américo Wang <xiyou.wangcong@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-08 01:11:23 +07:00
write_lock_irq(&filp->f_owner.lock);
if (force || !filp->f_owner.pid) {
put_pid(filp->f_owner.pid);
filp->f_owner.pid = get_pid(pid);
filp->f_owner.pid_type = type;
if (pid) {
const struct cred *cred = current_cred();
filp->f_owner.uid = cred->uid;
filp->f_owner.euid = cred->euid;
}
}
Fix race in tty_fasync() properly This reverts commit 703625118069 ("tty: fix race in tty_fasync") and commit b04da8bfdfbb ("fnctl: f_modown should call write_lock_irqsave/ restore") that tried to fix up some of the fallout but was incomplete. It turns out that we really cannot hold 'tty->ctrl_lock' over calling __f_setown, because not only did that cause problems with interrupt disables (which the second commit fixed), it also causes a potential ABBA deadlock due to lock ordering. Thanks to Tetsuo Handa for following up on the issue, and running lockdep to show the problem. It goes roughly like this: - f_getown gets filp->f_owner.lock for reading without interrupts disabled, so an interrupt that happens while that lock is held can cause a lockdep chain from f_owner.lock -> sighand->siglock. - at the same time, the tty->ctrl_lock -> f_owner.lock chain that commit 703625118069 introduced, together with the pre-existing sighand->siglock -> tty->ctrl_lock chain means that we have a lock dependency the other way too. So instead of extending tty->ctrl_lock over the whole __f_setown() call, we now just take a reference to the 'pid' structure while holding the lock, and then release it after having done the __f_setown. That still guarantees that 'struct pid' won't go away from under us, which is all we really ever needed. Reported-and-tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Américo Wang <xiyou.wangcong@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-08 01:11:23 +07:00
write_unlock_irq(&filp->f_owner.lock);
}
void __f_setown(struct file *filp, struct pid *pid, enum pid_type type,
int force)
{
security_file_set_fowner(filp);
f_modown(filp, pid, type, force);
}
EXPORT_SYMBOL(__f_setown);
int f_setown(struct file *filp, unsigned long arg, int force)
{
enum pid_type type;
struct pid *pid = NULL;
int who = arg, ret = 0;
type = PIDTYPE_PID;
if (who < 0) {
/* avoid overflow below */
if (who == INT_MIN)
return -EINVAL;
type = PIDTYPE_PGID;
who = -who;
}
rcu_read_lock();
if (who) {
pid = find_vpid(who);
if (!pid)
ret = -ESRCH;
}
if (!ret)
__f_setown(filp, pid, type, force);
rcu_read_unlock();
return ret;
}
EXPORT_SYMBOL(f_setown);
void f_delown(struct file *filp)
{
f_modown(filp, NULL, PIDTYPE_PID, 1);
}
pid_t f_getown(struct file *filp)
{
pid_t pid;
read_lock(&filp->f_owner.lock);
pid = pid_vnr(filp->f_owner.pid);
if (filp->f_owner.pid_type == PIDTYPE_PGID)
pid = -pid;
read_unlock(&filp->f_owner.lock);
return pid;
}
static int f_setown_ex(struct file *filp, unsigned long arg)
{
struct f_owner_ex __user *owner_p = (void __user *)arg;
struct f_owner_ex owner;
struct pid *pid;
int type;
int ret;
ret = copy_from_user(&owner, owner_p, sizeof(owner));
if (ret)
return -EFAULT;
switch (owner.type) {
case F_OWNER_TID:
type = PIDTYPE_MAX;
break;
case F_OWNER_PID:
type = PIDTYPE_PID;
break;
case F_OWNER_PGRP:
type = PIDTYPE_PGID;
break;
default:
return -EINVAL;
}
rcu_read_lock();
pid = find_vpid(owner.pid);
if (owner.pid && !pid)
ret = -ESRCH;
else
__f_setown(filp, pid, type, 1);
rcu_read_unlock();
return ret;
}
static int f_getown_ex(struct file *filp, unsigned long arg)
{
struct f_owner_ex __user *owner_p = (void __user *)arg;
struct f_owner_ex owner;
int ret = 0;
read_lock(&filp->f_owner.lock);
owner.pid = pid_vnr(filp->f_owner.pid);
switch (filp->f_owner.pid_type) {
case PIDTYPE_MAX:
owner.type = F_OWNER_TID;
break;
case PIDTYPE_PID:
owner.type = F_OWNER_PID;
break;
case PIDTYPE_PGID:
owner.type = F_OWNER_PGRP;
break;
default:
WARN_ON(1);
ret = -EINVAL;
break;
}
read_unlock(&filp->f_owner.lock);
if (!ret) {
ret = copy_to_user(owner_p, &owner, sizeof(owner));
if (ret)
ret = -EFAULT;
}
return ret;
}
#ifdef CONFIG_CHECKPOINT_RESTORE
static int f_getowner_uids(struct file *filp, unsigned long arg)
{
struct user_namespace *user_ns = current_user_ns();
uid_t __user *dst = (void __user *)arg;
uid_t src[2];
int err;
read_lock(&filp->f_owner.lock);
src[0] = from_kuid(user_ns, filp->f_owner.uid);
src[1] = from_kuid(user_ns, filp->f_owner.euid);
read_unlock(&filp->f_owner.lock);
err = put_user(src[0], &dst[0]);
err |= put_user(src[1], &dst[1]);
return err;
}
#else
static int f_getowner_uids(struct file *filp, unsigned long arg)
{
return -EINVAL;
}
#endif
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
static bool rw_hint_valid(enum rw_hint hint)
{
switch (hint) {
case RWF_WRITE_LIFE_NOT_SET:
case RWH_WRITE_LIFE_NONE:
case RWH_WRITE_LIFE_SHORT:
case RWH_WRITE_LIFE_MEDIUM:
case RWH_WRITE_LIFE_LONG:
case RWH_WRITE_LIFE_EXTREME:
return true;
default:
return false;
}
}
static long fcntl_rw_hint(struct file *file, unsigned int cmd,
unsigned long arg)
{
struct inode *inode = file_inode(file);
u64 *argp = (u64 __user *)arg;
enum rw_hint hint;
u64 h;
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
switch (cmd) {
case F_GET_FILE_RW_HINT:
h = file_write_hint(file);
if (copy_to_user(argp, &h, sizeof(*argp)))
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
return -EFAULT;
return 0;
case F_SET_FILE_RW_HINT:
if (copy_from_user(&h, argp, sizeof(h)))
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
return -EFAULT;
hint = (enum rw_hint) h;
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
if (!rw_hint_valid(hint))
return -EINVAL;
spin_lock(&file->f_lock);
file->f_write_hint = hint;
spin_unlock(&file->f_lock);
return 0;
case F_GET_RW_HINT:
h = inode->i_write_hint;
if (copy_to_user(argp, &h, sizeof(*argp)))
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
return -EFAULT;
return 0;
case F_SET_RW_HINT:
if (copy_from_user(&h, argp, sizeof(h)))
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
return -EFAULT;
hint = (enum rw_hint) h;
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
if (!rw_hint_valid(hint))
return -EINVAL;
inode_lock(inode);
inode->i_write_hint = hint;
inode_unlock(inode);
return 0;
default:
return -EINVAL;
}
}
static long do_fcntl(int fd, unsigned int cmd, unsigned long arg,
struct file *filp)
{
void __user *argp = (void __user *)arg;
struct flock flock;
long err = -EINVAL;
switch (cmd) {
case F_DUPFD:
err = f_dupfd(arg, filp, 0);
break;
F_DUPFD_CLOEXEC implementation One more small change to extend the availability of creation of file descriptors with FD_CLOEXEC set. Adding a new command to fcntl() requires no new system call and the overall impact on code size if minimal. If this patch gets accepted we will also add this change to the next revision of the POSIX spec. To test the patch, use the following little program. Adjust the value of F_DUPFD_CLOEXEC appropriately. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <errno.h> #include <fcntl.h> #include <stdio.h> #include <stdlib.h> #include <unistd.h> #ifndef F_DUPFD_CLOEXEC # define F_DUPFD_CLOEXEC 12 #endif int main (int argc, char *argv[]) { if (argc > 1) { if (fcntl (3, F_GETFD) == 0) { puts ("descriptor not closed"); exit (1); } if (errno != EBADF) { puts ("error not EBADF"); exit (1); } exit (0); } int fd = fcntl (STDOUT_FILENO, F_DUPFD_CLOEXEC, 0); if (fd == -1 && errno == EINVAL) { puts ("F_DUPFD_CLOEXEC not supported"); return 0; } if (fd != 3) { puts ("program called with descriptors other than 0,1,2"); return 1; } execl ("/proc/self/exe", "/proc/self/exe", "1", NULL); puts ("execl failed"); return 1; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Ulrich Drepper <drepper@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: <linux-arch@vger.kernel.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 13:30:26 +07:00
case F_DUPFD_CLOEXEC:
err = f_dupfd(arg, filp, O_CLOEXEC);
break;
case F_GETFD:
err = get_close_on_exec(fd) ? FD_CLOEXEC : 0;
break;
case F_SETFD:
err = 0;
set_close_on_exec(fd, arg & FD_CLOEXEC);
break;
case F_GETFL:
err = filp->f_flags;
break;
case F_SETFL:
err = setfl(fd, filp, arg);
break;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
#if BITS_PER_LONG != 32
/* 32-bit arches must use fcntl64() */
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_GETLK:
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
#endif
case F_GETLK:
if (copy_from_user(&flock, argp, sizeof(flock)))
return -EFAULT;
err = fcntl_getlk(filp, cmd, &flock);
if (!err && copy_to_user(argp, &flock, sizeof(flock)))
return -EFAULT;
break;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
#if BITS_PER_LONG != 32
/* 32-bit arches must use fcntl64() */
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_SETLK:
case F_OFD_SETLKW:
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
#endif
/* Fallthrough */
case F_SETLK:
case F_SETLKW:
if (copy_from_user(&flock, argp, sizeof(flock)))
return -EFAULT;
err = fcntl_setlk(fd, filp, cmd, &flock);
break;
case F_GETOWN:
/*
* XXX If f_owner is a process group, the
* negative return value will get converted
* into an error. Oops. If we keep the
* current syscall conventions, the only way
* to fix this will be in libc.
*/
err = f_getown(filp);
force_successful_syscall_return();
break;
case F_SETOWN:
err = f_setown(filp, arg, 1);
break;
case F_GETOWN_EX:
err = f_getown_ex(filp, arg);
break;
case F_SETOWN_EX:
err = f_setown_ex(filp, arg);
break;
case F_GETOWNER_UIDS:
err = f_getowner_uids(filp, arg);
break;
case F_GETSIG:
err = filp->f_owner.signum;
break;
case F_SETSIG:
/* arg == 0 restores default behaviour. */
if (!valid_signal(arg)) {
break;
}
err = 0;
filp->f_owner.signum = arg;
break;
case F_GETLEASE:
err = fcntl_getlease(filp);
break;
case F_SETLEASE:
err = fcntl_setlease(fd, filp, arg);
break;
case F_NOTIFY:
err = fcntl_dirnotify(fd, filp, arg);
break;
case F_SETPIPE_SZ:
case F_GETPIPE_SZ:
err = pipe_fcntl(filp, cmd, arg);
break;
shm: add sealing API If two processes share a common memory region, they usually want some guarantees to allow safe access. This often includes: - one side cannot overwrite data while the other reads it - one side cannot shrink the buffer while the other accesses it - one side cannot grow the buffer beyond previously set boundaries If there is a trust-relationship between both parties, there is no need for policy enforcement. However, if there's no trust relationship (eg., for general-purpose IPC) sharing memory-regions is highly fragile and often not possible without local copies. Look at the following two use-cases: 1) A graphics client wants to share its rendering-buffer with a graphics-server. The memory-region is allocated by the client for read/write access and a second FD is passed to the server. While scanning out from the memory region, the server has no guarantee that the client doesn't shrink the buffer at any time, requiring rather cumbersome SIGBUS handling. 2) A process wants to perform an RPC on another process. To avoid huge bandwidth consumption, zero-copy is preferred. After a message is assembled in-memory and a FD is passed to the remote side, both sides want to be sure that neither modifies this shared copy, anymore. The source may have put sensible data into the message without a separate copy and the target may want to parse the message inline, to avoid a local copy. While SIGBUS handling, POSIX mandatory locking and MAP_DENYWRITE provide ways to achieve most of this, the first one is unproportionally ugly to use in libraries and the latter two are broken/racy or even disabled due to denial of service attacks. This patch introduces the concept of SEALING. If you seal a file, a specific set of operations is blocked on that file forever. Unlike locks, seals can only be set, never removed. Hence, once you verified a specific set of seals is set, you're guaranteed that no-one can perform the blocked operations on this file, anymore. An initial set of SEALS is introduced by this patch: - SHRINK: If SEAL_SHRINK is set, the file in question cannot be reduced in size. This affects ftruncate() and open(O_TRUNC). - GROW: If SEAL_GROW is set, the file in question cannot be increased in size. This affects ftruncate(), fallocate() and write(). - WRITE: If SEAL_WRITE is set, no write operations (besides resizing) are possible. This affects fallocate(PUNCH_HOLE), mmap() and write(). - SEAL: If SEAL_SEAL is set, no further seals can be added to a file. This basically prevents the F_ADD_SEAL operation on a file and can be set to prevent others from adding further seals that you don't want. The described use-cases can easily use these seals to provide safe use without any trust-relationship: 1) The graphics server can verify that a passed file-descriptor has SEAL_SHRINK set. This allows safe scanout, while the client is allowed to increase buffer size for window-resizing on-the-fly. Concurrent writes are explicitly allowed. 2) For general-purpose IPC, both processes can verify that SEAL_SHRINK, SEAL_GROW and SEAL_WRITE are set. This guarantees that neither process can modify the data while the other side parses it. Furthermore, it guarantees that even with writable FDs passed to the peer, it cannot increase the size to hit memory-limits of the source process (in case the file-storage is accounted to the source). The new API is an extension to fcntl(), adding two new commands: F_GET_SEALS: Return a bitset describing the seals on the file. This can be called on any FD if the underlying file supports sealing. F_ADD_SEALS: Change the seals of a given file. This requires WRITE access to the file and F_SEAL_SEAL may not already be set. Furthermore, the underlying file must support sealing and there may not be any existing shared mapping of that file. Otherwise, EBADF/EPERM is returned. The given seals are _added_ to the existing set of seals on the file. You cannot remove seals again. The fcntl() handler is currently specific to shmem and disabled on all files. A file needs to explicitly support sealing for this interface to work. A separate syscall is added in a follow-up, which creates files that support sealing. There is no intention to support this on other file-systems. Semantics are unclear for non-volatile files and we lack any use-case right now. Therefore, the implementation is specific to shmem. Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Ryan Lortie <desrt@desrt.ca> Cc: Lennart Poettering <lennart@poettering.net> Cc: Daniel Mack <zonque@gmail.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-09 04:25:27 +07:00
case F_ADD_SEALS:
case F_GET_SEALS:
err = shmem_fcntl(filp, cmd, arg);
break;
fs: add fcntl() interface for setting/getting write life time hints Define a set of write life time hints: RWH_WRITE_LIFE_NOT_SET No hint information set RWH_WRITE_LIFE_NONE No hints about write life time RWH_WRITE_LIFE_SHORT Data written has a short life time RWH_WRITE_LIFE_MEDIUM Data written has a medium life time RWH_WRITE_LIFE_LONG Data written has a long life time RWH_WRITE_LIFE_EXTREME Data written has an extremely long life time The intent is for these values to be relative to each other, no absolute meaning should be attached to these flag names. Add an fcntl interface for querying these flags, and also for setting them as well: F_GET_RW_HINT Returns the read/write hint set on the underlying inode. F_SET_RW_HINT Set one of the above write hints on the underlying inode. F_GET_FILE_RW_HINT Returns the read/write hint set on the file descriptor. F_SET_FILE_RW_HINT Set one of the above write hints on the file descriptor. The user passes in a 64-bit pointer to get/set these values, and the interface returns 0/-1 on success/error. Sample program testing/implementing basic setting/getting of write hints is below. Add support for storing the write life time hint in the inode flags and in struct file as well, and pass them to the kiocb flags. If both a file and its corresponding inode has a write hint, then we use the one in the file, if available. The file hint can be used for sync/direct IO, for buffered writeback only the inode hint is available. This is in preparation for utilizing these hints in the block layer, to guide on-media data placement. /* * writehint.c: get or set an inode write hint */ #include <stdio.h> #include <fcntl.h> #include <stdlib.h> #include <unistd.h> #include <stdbool.h> #include <inttypes.h> #ifndef F_GET_RW_HINT #define F_LINUX_SPECIFIC_BASE 1024 #define F_GET_RW_HINT (F_LINUX_SPECIFIC_BASE + 11) #define F_SET_RW_HINT (F_LINUX_SPECIFIC_BASE + 12) #endif static char *str[] = { "RWF_WRITE_LIFE_NOT_SET", "RWH_WRITE_LIFE_NONE", "RWH_WRITE_LIFE_SHORT", "RWH_WRITE_LIFE_MEDIUM", "RWH_WRITE_LIFE_LONG", "RWH_WRITE_LIFE_EXTREME" }; int main(int argc, char *argv[]) { uint64_t hint; int fd, ret; if (argc < 2) { fprintf(stderr, "%s: file <hint>\n", argv[0]); return 1; } fd = open(argv[1], O_RDONLY); if (fd < 0) { perror("open"); return 2; } if (argc > 2) { hint = atoi(argv[2]); ret = fcntl(fd, F_SET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_SET_RW_HINT"); return 4; } } ret = fcntl(fd, F_GET_RW_HINT, &hint); if (ret < 0) { perror("fcntl: F_GET_RW_HINT"); return 3; } printf("%s: hint %s\n", argv[1], str[hint]); close(fd); return 0; } Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-06-28 00:47:04 +07:00
case F_GET_RW_HINT:
case F_SET_RW_HINT:
case F_GET_FILE_RW_HINT:
case F_SET_FILE_RW_HINT:
err = fcntl_rw_hint(filp, cmd, arg);
break;
default:
break;
}
return err;
}
2011-03-13 14:51:11 +07:00
static int check_fcntl_cmd(unsigned cmd)
{
switch (cmd) {
case F_DUPFD:
case F_DUPFD_CLOEXEC:
case F_GETFD:
case F_SETFD:
case F_GETFL:
return 1;
}
return 0;
}
SYSCALL_DEFINE3(fcntl, unsigned int, fd, unsigned int, cmd, unsigned long, arg)
{
struct fd f = fdget_raw(fd);
long err = -EBADF;
if (!f.file)
goto out;
if (unlikely(f.file->f_mode & FMODE_PATH)) {
if (!check_fcntl_cmd(cmd))
goto out1;
2011-03-13 14:51:11 +07:00
}
err = security_file_fcntl(f.file, cmd, arg);
if (!err)
err = do_fcntl(fd, cmd, arg, f.file);
out1:
fdput(f);
out:
return err;
}
#if BITS_PER_LONG == 32
SYSCALL_DEFINE3(fcntl64, unsigned int, fd, unsigned int, cmd,
unsigned long, arg)
{
void __user *argp = (void __user *)arg;
struct fd f = fdget_raw(fd);
struct flock64 flock;
long err = -EBADF;
if (!f.file)
goto out;
if (unlikely(f.file->f_mode & FMODE_PATH)) {
if (!check_fcntl_cmd(cmd))
goto out1;
2011-03-13 14:51:11 +07:00
}
err = security_file_fcntl(f.file, cmd, arg);
if (err)
goto out1;
switch (cmd) {
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
case F_GETLK64:
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_GETLK:
err = -EFAULT;
if (copy_from_user(&flock, argp, sizeof(flock)))
break;
err = fcntl_getlk64(f.file, cmd, &flock);
if (!err && copy_to_user(argp, &flock, sizeof(flock)))
err = -EFAULT;
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
break;
case F_SETLK64:
case F_SETLKW64:
locks: rename file-private locks to "open file description locks" File-private locks have been merged into Linux for v3.15, and *now* people are commenting that the name and macro definitions for the new file-private locks suck. ...and I can't even disagree. The names and command macros do suck. We're going to have to live with these for a long time, so it's important that we be happy with the names before we're stuck with them. The consensus on the lists so far is that they should be rechristened as "open file description locks". The name isn't a big deal for the kernel, but the command macros are not visually distinct enough from the traditional POSIX lock macros. The glibc and documentation folks are recommending that we change them to look like F_OFD_{GETLK|SETLK|SETLKW}. That lessens the chance that a programmer will typo one of the commands wrong, and also makes it easier to spot this difference when reading code. This patch makes the following changes that I think are necessary before v3.15 ships: 1) rename the command macros to their new names. These end up in the uapi headers and so are part of the external-facing API. It turns out that glibc doesn't actually use the fcntl.h uapi header, but it's hard to be sure that something else won't. Changing it now is safest. 2) make the the /proc/locks output display these as type "OFDLCK" Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Carlos O'Donell <carlos@redhat.com> Cc: Stefan Metzmacher <metze@samba.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Frank Filz <ffilzlnx@mindspring.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-04-22 19:23:58 +07:00
case F_OFD_SETLK:
case F_OFD_SETLKW:
err = -EFAULT;
if (copy_from_user(&flock, argp, sizeof(flock)))
break;
err = fcntl_setlk64(fd, f.file, cmd, &flock);
locks: add new fcntl cmd values for handling file private locks Due to some unfortunate history, POSIX locks have very strange and unhelpful semantics. The thing that usually catches people by surprise is that they are dropped whenever the process closes any file descriptor associated with the inode. This is extremely problematic for people developing file servers that need to implement byte-range locks. Developers often need a "lock management" facility to ensure that file descriptors are not closed until all of the locks associated with the inode are finished. Additionally, "classic" POSIX locks are owned by the process. Locks taken between threads within the same process won't conflict with one another, which renders them useless for synchronization between threads. This patchset adds a new type of lock that attempts to address these issues. These locks conflict with classic POSIX read/write locks, but have semantics that are more like BSD locks with respect to inheritance and behavior on close. This is implemented primarily by changing how fl_owner field is set for these locks. Instead of having them owned by the files_struct of the process, they are instead owned by the filp on which they were acquired. Thus, they are inherited across fork() and are only released when the last reference to a filp is put. These new semantics prevent them from being merged with classic POSIX locks, even if they are acquired by the same process. These locks will also conflict with classic POSIX locks even if they are acquired by the same process or on the same file descriptor. The new locks are managed using a new set of cmd values to the fcntl() syscall. The initial implementation of this converts these values to "classic" cmd values at a fairly high level, and the details are not exposed to the underlying filesystem. We may eventually want to push this handing out to the lower filesystem code but for now I don't see any need for it. Also, note that with this implementation the new cmd values are only available via fcntl64() on 32-bit arches. There's little need to add support for legacy apps on a new interface like this. Signed-off-by: Jeff Layton <jlayton@redhat.com>
2014-02-04 00:13:10 +07:00
break;
default:
err = do_fcntl(fd, cmd, arg, f.file);
break;
}
out1:
fdput(f);
out:
return err;
}
#endif
#ifdef CONFIG_COMPAT
/* careful - don't use anywhere else */
#define copy_flock_fields(dst, src) \
(dst)->l_type = (src)->l_type; \
(dst)->l_whence = (src)->l_whence; \
(dst)->l_start = (src)->l_start; \
(dst)->l_len = (src)->l_len; \
(dst)->l_pid = (src)->l_pid;
static int get_compat_flock(struct flock *kfl, const struct compat_flock __user *ufl)
{
struct compat_flock fl;
if (copy_from_user(&fl, ufl, sizeof(struct compat_flock)))
return -EFAULT;
copy_flock_fields(kfl, &fl);
return 0;
}
static int get_compat_flock64(struct flock *kfl, const struct compat_flock64 __user *ufl)
{
struct compat_flock64 fl;
if (copy_from_user(&fl, ufl, sizeof(struct compat_flock64)))
return -EFAULT;
copy_flock_fields(kfl, &fl);
return 0;
}
static int put_compat_flock(const struct flock *kfl, struct compat_flock __user *ufl)
{
struct compat_flock fl;
memset(&fl, 0, sizeof(struct compat_flock));
copy_flock_fields(&fl, kfl);
if (copy_to_user(ufl, &fl, sizeof(struct compat_flock)))
return -EFAULT;
return 0;
}
static int put_compat_flock64(const struct flock *kfl, struct compat_flock64 __user *ufl)
{
struct compat_flock64 fl;
memset(&fl, 0, sizeof(struct compat_flock64));
copy_flock_fields(&fl, kfl);
if (copy_to_user(ufl, &fl, sizeof(struct compat_flock64)))
return -EFAULT;
return 0;
}
#undef copy_flock_fields
static unsigned int
convert_fcntl_cmd(unsigned int cmd)
{
switch (cmd) {
case F_GETLK64:
return F_GETLK;
case F_SETLK64:
return F_SETLK;
case F_SETLKW64:
return F_SETLKW;
}
return cmd;
}
/*
* GETLK was successful and we need to return the data, but it needs to fit in
* the compat structure.
* l_start shouldn't be too big, unless the original start + end is greater than
* COMPAT_OFF_T_MAX, in which case the app was asking for trouble, so we return
* -EOVERFLOW in that case. l_len could be too big, in which case we just
* truncate it, and only allow the app to see that part of the conflicting lock
* that might make sense to it anyway
*/
static int fixup_compat_flock(struct flock *flock)
{
if (flock->l_start > COMPAT_OFF_T_MAX)
return -EOVERFLOW;
if (flock->l_len > COMPAT_OFF_T_MAX)
flock->l_len = COMPAT_OFF_T_MAX;
return 0;
}
COMPAT_SYSCALL_DEFINE3(fcntl64, unsigned int, fd, unsigned int, cmd,
compat_ulong_t, arg)
{
struct fd f = fdget_raw(fd);
struct flock flock;
long err = -EBADF;
if (!f.file)
return err;
if (unlikely(f.file->f_mode & FMODE_PATH)) {
if (!check_fcntl_cmd(cmd))
goto out_put;
}
err = security_file_fcntl(f.file, cmd, arg);
if (err)
goto out_put;
switch (cmd) {
case F_GETLK:
err = get_compat_flock(&flock, compat_ptr(arg));
if (err)
break;
err = fcntl_getlk(f.file, convert_fcntl_cmd(cmd), &flock);
if (err)
break;
err = fixup_compat_flock(&flock);
if (err)
return err;
err = put_compat_flock(&flock, compat_ptr(arg));
break;
case F_GETLK64:
case F_OFD_GETLK:
err = get_compat_flock64(&flock, compat_ptr(arg));
if (err)
break;
err = fcntl_getlk(f.file, convert_fcntl_cmd(cmd), &flock);
if (err)
break;
err = fixup_compat_flock(&flock);
if (err)
return err;
err = put_compat_flock64(&flock, compat_ptr(arg));
break;
case F_SETLK:
case F_SETLKW:
err = get_compat_flock(&flock, compat_ptr(arg));
if (err)
break;
err = fcntl_setlk(fd, f.file, convert_fcntl_cmd(cmd), &flock);
break;
case F_SETLK64:
case F_SETLKW64:
case F_OFD_SETLK:
case F_OFD_SETLKW:
err = get_compat_flock64(&flock, compat_ptr(arg));
if (err)
break;
err = fcntl_setlk(fd, f.file, convert_fcntl_cmd(cmd), &flock);
break;
default:
err = do_fcntl(fd, cmd, arg, f.file);
break;
}
out_put:
fdput(f);
return err;
}
COMPAT_SYSCALL_DEFINE3(fcntl, unsigned int, fd, unsigned int, cmd,
compat_ulong_t, arg)
{
switch (cmd) {
case F_GETLK64:
case F_SETLK64:
case F_SETLKW64:
case F_OFD_GETLK:
case F_OFD_SETLK:
case F_OFD_SETLKW:
return -EINVAL;
}
return compat_sys_fcntl64(fd, cmd, arg);
}
#endif
/* Table to convert sigio signal codes into poll band bitmaps */
static const long band_table[NSIGPOLL] = {
POLLIN | POLLRDNORM, /* POLL_IN */
POLLOUT | POLLWRNORM | POLLWRBAND, /* POLL_OUT */
POLLIN | POLLRDNORM | POLLMSG, /* POLL_MSG */
POLLERR, /* POLL_ERR */
POLLPRI | POLLRDBAND, /* POLL_PRI */
POLLHUP | POLLERR /* POLL_HUP */
};
static inline int sigio_perm(struct task_struct *p,
struct fown_struct *fown, int sig)
{
const struct cred *cred;
int ret;
rcu_read_lock();
cred = __task_cred(p);
ret = ((uid_eq(fown->euid, GLOBAL_ROOT_UID) ||
uid_eq(fown->euid, cred->suid) || uid_eq(fown->euid, cred->uid) ||
uid_eq(fown->uid, cred->suid) || uid_eq(fown->uid, cred->uid)) &&
!security_file_send_sigiotask(p, fown, sig));
rcu_read_unlock();
return ret;
}
static void send_sigio_to_task(struct task_struct *p,
struct fown_struct *fown,
int fd, int reason, int group)
{
/*
* F_SETSIG can change ->signum lockless in parallel, make
* sure we read it once and use the same value throughout.
*/
int signum = ACCESS_ONCE(fown->signum);
if (!sigio_perm(p, fown, signum))
return;
switch (signum) {
siginfo_t si;
default:
/* Queue a rt signal with the appropriate fd as its
value. We use SI_SIGIO as the source, not
SI_KERNEL, since kernel signals always get
delivered even if we can't queue. Failure to
queue in this case _should_ be reported; we fall
back to SIGIO in that case. --sct */
si.si_signo = signum;
si.si_errno = 0;
si.si_code = reason;
fcntl: Don't use ambiguous SIG_POLL si_codes We have a weird and problematic intersection of features that when they all come together result in ambiguous siginfo values, that we can not support properly. - Supporting fcntl(F_SETSIG,...) with arbitrary valid signals. - Using positive values for POLL_IN, POLL_OUT, POLL_MSG, ..., etc that imply they are signal specific si_codes and using the aforementioned arbitrary signal to deliver them. - Supporting injection of arbitrary siginfo values for debugging and checkpoint/restore. The result is that just looking at siginfo si_codes of 1 to 6 are ambigious. It could either be a signal specific si_code or it could be a generic si_code. For most of the kernel this is a non-issue but for sending signals with siginfo it is impossible to play back the kernel signals and get the same result. Strictly speaking when the si_code was changed from SI_SIGIO to POLL_IN and friends between 2.2 and 2.4 this functionality was not ambiguous, as only real time signals were supported. Before 2.4 was released the kernel began supporting siginfo with non realtime signals so they could give details of why the signal was sent. The result is that if F_SETSIG is set to one of the signals with signal specific si_codes then user space can not know why the signal was sent. I grepped through a bunch of userspace programs using debian code search to get a feel for how often people choose a signal that results in an ambiguous si_code. I only found one program doing so and it was using SIGCHLD to test the F_SETSIG functionality, and did not appear to be a real world usage. Therefore the ambiguity does not appears to be a real world problem in practice. Remove the ambiguity while introducing the smallest chance of breakage by changing the si_code to SI_SIGIO when signals with signal specific si_codes are targeted. Fixes: v2.3.40 -- Added support for queueing non-rt signals Fixes: v2.3.21 -- Changed the si_code from SI_SIGIO Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-29 21:28:50 +07:00
/*
* Posix definies POLL_IN and friends to be signal
* specific si_codes for SIG_POLL. Linux extended
* these si_codes to other signals in a way that is
* ambiguous if other signals also have signal
* specific si_codes. In that case use SI_SIGIO instead
* to remove the ambiguity.
*/
if ((signum != SIGPOLL) && sig_specific_sicodes(signum))
fcntl: Don't use ambiguous SIG_POLL si_codes We have a weird and problematic intersection of features that when they all come together result in ambiguous siginfo values, that we can not support properly. - Supporting fcntl(F_SETSIG,...) with arbitrary valid signals. - Using positive values for POLL_IN, POLL_OUT, POLL_MSG, ..., etc that imply they are signal specific si_codes and using the aforementioned arbitrary signal to deliver them. - Supporting injection of arbitrary siginfo values for debugging and checkpoint/restore. The result is that just looking at siginfo si_codes of 1 to 6 are ambigious. It could either be a signal specific si_code or it could be a generic si_code. For most of the kernel this is a non-issue but for sending signals with siginfo it is impossible to play back the kernel signals and get the same result. Strictly speaking when the si_code was changed from SI_SIGIO to POLL_IN and friends between 2.2 and 2.4 this functionality was not ambiguous, as only real time signals were supported. Before 2.4 was released the kernel began supporting siginfo with non realtime signals so they could give details of why the signal was sent. The result is that if F_SETSIG is set to one of the signals with signal specific si_codes then user space can not know why the signal was sent. I grepped through a bunch of userspace programs using debian code search to get a feel for how often people choose a signal that results in an ambiguous si_code. I only found one program doing so and it was using SIGCHLD to test the F_SETSIG functionality, and did not appear to be a real world usage. Therefore the ambiguity does not appears to be a real world problem in practice. Remove the ambiguity while introducing the smallest chance of breakage by changing the si_code to SI_SIGIO when signals with signal specific si_codes are targeted. Fixes: v2.3.40 -- Added support for queueing non-rt signals Fixes: v2.3.21 -- Changed the si_code from SI_SIGIO Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-29 21:28:50 +07:00
si.si_code = SI_SIGIO;
/* Make sure we are called with one of the POLL_*
reasons, otherwise we could leak kernel stack into
userspace. */
fcntl: Don't use ambiguous SIG_POLL si_codes We have a weird and problematic intersection of features that when they all come together result in ambiguous siginfo values, that we can not support properly. - Supporting fcntl(F_SETSIG,...) with arbitrary valid signals. - Using positive values for POLL_IN, POLL_OUT, POLL_MSG, ..., etc that imply they are signal specific si_codes and using the aforementioned arbitrary signal to deliver them. - Supporting injection of arbitrary siginfo values for debugging and checkpoint/restore. The result is that just looking at siginfo si_codes of 1 to 6 are ambigious. It could either be a signal specific si_code or it could be a generic si_code. For most of the kernel this is a non-issue but for sending signals with siginfo it is impossible to play back the kernel signals and get the same result. Strictly speaking when the si_code was changed from SI_SIGIO to POLL_IN and friends between 2.2 and 2.4 this functionality was not ambiguous, as only real time signals were supported. Before 2.4 was released the kernel began supporting siginfo with non realtime signals so they could give details of why the signal was sent. The result is that if F_SETSIG is set to one of the signals with signal specific si_codes then user space can not know why the signal was sent. I grepped through a bunch of userspace programs using debian code search to get a feel for how often people choose a signal that results in an ambiguous si_code. I only found one program doing so and it was using SIGCHLD to test the F_SETSIG functionality, and did not appear to be a real world usage. Therefore the ambiguity does not appears to be a real world problem in practice. Remove the ambiguity while introducing the smallest chance of breakage by changing the si_code to SI_SIGIO when signals with signal specific si_codes are targeted. Fixes: v2.3.40 -- Added support for queueing non-rt signals Fixes: v2.3.21 -- Changed the si_code from SI_SIGIO Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2017-06-29 21:28:50 +07:00
BUG_ON((reason < POLL_IN) || ((reason - POLL_IN) >= NSIGPOLL));
if (reason - POLL_IN >= NSIGPOLL)
si.si_band = ~0L;
else
si.si_band = band_table[reason - POLL_IN];
si.si_fd = fd;
if (!do_send_sig_info(signum, &si, p, group))
break;
/* fall-through: fall back on the old plain SIGIO signal */
case 0:
do_send_sig_info(SIGIO, SEND_SIG_PRIV, p, group);
}
}
void send_sigio(struct fown_struct *fown, int fd, int band)
{
struct task_struct *p;
enum pid_type type;
struct pid *pid;
int group = 1;
read_lock(&fown->lock);
type = fown->pid_type;
if (type == PIDTYPE_MAX) {
group = 0;
type = PIDTYPE_PID;
}
pid = fown->pid;
if (!pid)
goto out_unlock_fown;
read_lock(&tasklist_lock);
do_each_pid_task(pid, type, p) {
send_sigio_to_task(p, fown, fd, band, group);
} while_each_pid_task(pid, type, p);
read_unlock(&tasklist_lock);
out_unlock_fown:
read_unlock(&fown->lock);
}
static void send_sigurg_to_task(struct task_struct *p,
struct fown_struct *fown, int group)
{
if (sigio_perm(p, fown, SIGURG))
do_send_sig_info(SIGURG, SEND_SIG_PRIV, p, group);
}
int send_sigurg(struct fown_struct *fown)
{
struct task_struct *p;
enum pid_type type;
struct pid *pid;
int group = 1;
int ret = 0;
read_lock(&fown->lock);
type = fown->pid_type;
if (type == PIDTYPE_MAX) {
group = 0;
type = PIDTYPE_PID;
}
pid = fown->pid;
if (!pid)
goto out_unlock_fown;
ret = 1;
read_lock(&tasklist_lock);
do_each_pid_task(pid, type, p) {
send_sigurg_to_task(p, fown, group);
} while_each_pid_task(pid, type, p);
read_unlock(&tasklist_lock);
out_unlock_fown:
read_unlock(&fown->lock);
return ret;
}
static DEFINE_SPINLOCK(fasync_lock);
static struct kmem_cache *fasync_cache __read_mostly;
static void fasync_free_rcu(struct rcu_head *head)
{
kmem_cache_free(fasync_cache,
container_of(head, struct fasync_struct, fa_rcu));
}
/*
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
* Remove a fasync entry. If successfully removed, return
* positive and clear the FASYNC flag. If no entry exists,
* do nothing and return 0.
*
* NOTE! It is very important that the FASYNC flag always
* match the state "is the filp on a fasync list".
*
*/
int fasync_remove_entry(struct file *filp, struct fasync_struct **fapp)
{
struct fasync_struct *fa, **fp;
int result = 0;
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
spin_lock(&filp->f_lock);
spin_lock(&fasync_lock);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
if (fa->fa_file != filp)
continue;
spin_lock_irq(&fa->fa_lock);
fa->fa_file = NULL;
spin_unlock_irq(&fa->fa_lock);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
*fp = fa->fa_next;
call_rcu(&fa->fa_rcu, fasync_free_rcu);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
filp->f_flags &= ~FASYNC;
result = 1;
break;
}
spin_unlock(&fasync_lock);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
spin_unlock(&filp->f_lock);
return result;
}
struct fasync_struct *fasync_alloc(void)
{
return kmem_cache_alloc(fasync_cache, GFP_KERNEL);
}
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
/*
* NOTE! This can be used only for unused fasync entries:
* entries that actually got inserted on the fasync list
* need to be released by rcu - see fasync_remove_entry.
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
*/
void fasync_free(struct fasync_struct *new)
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
{
kmem_cache_free(fasync_cache, new);
}
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
/*
* Insert a new entry into the fasync list. Return the pointer to the
* old one if we didn't use the new one.
*
* NOTE! It is very important that the FASYNC flag always
* match the state "is the filp on a fasync list".
*/
struct fasync_struct *fasync_insert_entry(int fd, struct file *filp, struct fasync_struct **fapp, struct fasync_struct *new)
{
struct fasync_struct *fa, **fp;
spin_lock(&filp->f_lock);
spin_lock(&fasync_lock);
for (fp = fapp; (fa = *fp) != NULL; fp = &fa->fa_next) {
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
if (fa->fa_file != filp)
continue;
spin_lock_irq(&fa->fa_lock);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
fa->fa_fd = fd;
spin_unlock_irq(&fa->fa_lock);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
goto out;
}
spin_lock_init(&new->fa_lock);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
new->magic = FASYNC_MAGIC;
new->fa_file = filp;
new->fa_fd = fd;
new->fa_next = *fapp;
rcu_assign_pointer(*fapp, new);
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
filp->f_flags |= FASYNC;
out:
spin_unlock(&fasync_lock);
spin_unlock(&filp->f_lock);
return fa;
}
/*
* Add a fasync entry. Return negative on error, positive if
* added, and zero if did nothing but change an existing one.
*/
static int fasync_add_entry(int fd, struct file *filp, struct fasync_struct **fapp)
{
struct fasync_struct *new;
new = fasync_alloc();
if (!new)
return -ENOMEM;
/*
* fasync_insert_entry() returns the old (update) entry if
* it existed.
*
* So free the (unused) new entry and return 0 to let the
* caller know that we didn't add any new fasync entries.
*/
if (fasync_insert_entry(fd, filp, fapp, new)) {
fasync_free(new);
return 0;
}
return 1;
}
fasync: split 'fasync_helper()' into separate add/remove functions Yes, the add and remove cases do share the same basic loop and the locking, but the compiler can inline and then CSE some of the end result anyway. And splitting it up makes the code way easier to follow, and makes it clearer exactly what the semantics are. In particular, we must make sure that the FASYNC flag in file->f_flags exactly matches the state of "is this file on any fasync list", since not only is that flag visible to user space (F_GETFL), but we also use that flag to check whether we need to remove any fasync entries on file close. We got that wrong for the case of a mixed use of file locking (which tries to remove any fasync entries for file leases) and fasync. Splitting the function up also makes it possible to do some future optimizations without making the function even messier. In particular, since the FASYNC flag has to match the state of "is this on a list", we can do the following future optimizations: - on remove, we don't even need to get the locks and traverse the list if FASYNC isn't set, since we can know a priori that there is no point (this is effectively the same optimization that we already do in __fput() wrt removing fasync on file close) - on add, we can use the FASYNC flag to decide whether we are changing an existing entry or need to allocate a new one. but this is just the cleanup + fix for the FASYNC flag. Acked-by: Al Viro <viro@ZenIV.linux.org.uk> Tested-by: Tavis Ormandy <taviso@google.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Matt Mackall <mpm@selenic.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-16 23:23:37 +07:00
/*
* fasync_helper() is used by almost all character device drivers
* to set up the fasync queue, and for regular files by the file
* lease code. It returns negative on error, 0 if it did no changes
* and positive if it added/deleted the entry.
*/
int fasync_helper(int fd, struct file * filp, int on, struct fasync_struct **fapp)
{
if (!on)
return fasync_remove_entry(filp, fapp);
return fasync_add_entry(fd, filp, fapp);
}
EXPORT_SYMBOL(fasync_helper);
/*
* rcu_read_lock() is held
*/
static void kill_fasync_rcu(struct fasync_struct *fa, int sig, int band)
{
while (fa) {
struct fown_struct *fown;
unsigned long flags;
if (fa->magic != FASYNC_MAGIC) {
printk(KERN_ERR "kill_fasync: bad magic number in "
"fasync_struct!\n");
return;
}
spin_lock_irqsave(&fa->fa_lock, flags);
if (fa->fa_file) {
fown = &fa->fa_file->f_owner;
/* Don't send SIGURG to processes which have not set a
queued signum: SIGURG has its own default signalling
mechanism. */
if (!(sig == SIGURG && fown->signum == 0))
send_sigio(fown, fa->fa_fd, band);
}
spin_unlock_irqrestore(&fa->fa_lock, flags);
fa = rcu_dereference(fa->fa_next);
}
}
void kill_fasync(struct fasync_struct **fp, int sig, int band)
{
/* First a quick test without locking: usually
* the list is empty.
*/
if (*fp) {
rcu_read_lock();
kill_fasync_rcu(rcu_dereference(*fp), sig, band);
rcu_read_unlock();
}
}
EXPORT_SYMBOL(kill_fasync);
static int __init fcntl_init(void)
{
/*
* Please add new bits here to ensure allocation uniqueness.
* Exceptions: O_NONBLOCK is a two bit define on parisc; O_NDELAY
* is defined as O_NONBLOCK on some platforms and not on others.
*/
BUILD_BUG_ON(21 - 1 /* for O_RDONLY being 0 */ !=
HWEIGHT32(
(VALID_OPEN_FLAGS & ~(O_NONBLOCK | O_NDELAY)) |
__FMODE_EXEC | __FMODE_NONOTIFY));
fasync_cache = kmem_cache_create("fasync_cache",
sizeof(struct fasync_struct), 0, SLAB_PANIC, NULL);
return 0;
}
module_init(fcntl_init)