AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 21:35:13 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
b6bb2bc2fd
linux_dsm_epyc7002/Documentation/devicetree/bindings/iio/st-sensors.txt

82 lines
2.0 KiB
Plaintext
Raw Normal View History

iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
STMicroelectronics MEMS sensors
The STMicroelectronics sensor devices are pretty straight-forward I2C or
SPI devices, all sharing the same device tree descriptions no matter what
type of sensor it is.
Required properties:
- compatible: see the list of valid compatible strings below
- reg: the I2C or SPI address the device will respond to
Optional properties:
- vdd-supply: an optional regulator that needs to be on to provide VDD
power to the sensor.
- vddio-supply: an optional regulator that needs to be on to provide the
VDD IO power to the sensor.
- st,drdy-int-pin: the pin on the package that will be used to signal
"data ready" (valid values: 1 or 2). This property is not configurable
on all sensors.
iio: st_sensors: support open drain mode Some types of ST Sensors can be connected to the same IRQ line as other peripherals using open drain. Add a device tree binding and a sensor data property to flip the right bit in the interrupt control register to enable open drain mode on the INT line. If the line is set to be open drain, also tag on IRQF_SHARED to the IRQ flags when requesting the interrupt, as the whole point of using open drain interrupt lines is to share them with more than one peripheral (wire-or). Cc: devicetree@vger.kernel.org Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Acked-by: Rob Herring <rob@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-14 15:45:21 +07:00
- drive-open-drain: the interrupt/data ready line will be configured
as open drain, which is useful if several sensors share the same
interrupt line. (This binding is taken from pinctrl/pinctrl-bindings.txt)
This is a boolean property.
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
Sensors may also have applicable pin control settings, those use the
standard bindings from pinctrl/pinctrl-bindings.txt.
Valid compatible strings:
Accelerometers:
iio: accel: st_accel: handle deprecated bindings The earlier deployed LIS3LV02DL driver had already defined a few DT bindings that need to be supported by the new more generic driver and listed as compatible but deprecated bindings in the documentation. After this we can start to activate the new driver with the old systems where applicable. As part of this enablement: make us depend on the old drivers not being in use so we don't get a kernel with two competing drivers. Cc: devicetree@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-01-05 20:32:33 +07:00
- st,lis3lv02d (deprecated, use st,lis3lv02dl-accel)
- st,lis302dl-spi (deprecated, use st,lis3lv02dl-accel)
iio: st-sensors: add support for lis3lv02d accelerometer This adds support for the LIS3LV02 accelerometer found in the ST Microelectronics Nomadik board series. Cc: devicetree@vger.kernel.org Cc: Denis CIOCCA <denis.ciocca@st.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-03-18 16:52:06 +07:00
- st,lis3lv02dl-accel
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
- st,lsm303dlh-accel
- st,lsm303dlhc-accel
- st,lis3dh-accel
- st,lsm330d-accel
- st,lsm330dl-accel
- st,lsm330dlc-accel
iio: st_accel: support the LIS331DL sensor This adds support for the LIS331DL sensor version. This is a simple 8bit-only accelerometer. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-05-19 20:37:18 +07:00
- st,lis331dl-accel
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
- st,lis331dlh-accel
- st,lsm303dl-accel
- st,lsm303dlm-accel
- st,lsm330-accel
iio: st-accel: add support for lsm303agr accelerometer This adds support for the lsm303agr accelerometer. Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-21 15:35:44 +07:00
- st,lsm303agr-accel
iio: st-accel: add support for lis2dh12 This commit add support for STMicroelectronics lis2dh12 accelerometer. Datasheet for this device can be found here: http://www.st.com/st-web-ui/static/active/en/resource/technical/ document/datasheet/DM00091513.pdf Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Acked-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-11-12 14:36:49 +07:00
- st,lis2dh12-accel
iio: accel: Add support for the h3lis331dl accelerometer This commit adds support for STMicroelectronics h3lis331dl high-g accelerometer. The datasheet for this device can be found here: http://www.st.com/web/en/resource/technical/document/ datasheet/DM00053090.pdf Signed-off-by: Tiberiu Breana <tiberiu.a.breana@intel.com> Reviewed-by: Denis Ciocca <denis.ciocca@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-03-09 19:06:14 +07:00
- st,h3lis331dl-accel
Documentation: dt: iio: accel: add lng2dm sensor device binding Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-10-26 04:09:04 +07:00
- st,lng2dm-accel
dt-bindings: iio: accel: add LIS3L02DQ sensor device binding Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-25 22:50:50 +07:00
- st,lis3l02dq
dt-bindings: iio: accel: add LIS2DW12 sensor device binding Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-30 18:50:43 +07:00
- st,lis2dw12
dt-bindings: iio: accel: add LIS3DHH device bindings Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-17 23:17:12 +07:00
- st,lis3dhh
iio: st-accel: add support for lis3de This commit add support for STMicroelectronics lis3de accelerometer. Datasheet for this device can be found here: https://www.st.com/resource/en/datasheet/lis3de.pdf Signed-off-by: Heiko Stuebner <heiko.stuebner@bq.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-11-07 22:45:21 +07:00
- st,lis3de
dt-bindings: iio: accel: add LIS2DE12 sensor device binding Signed-off-by: Robert Jones <rjones@gateworks.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-04-11 07:12:08 +07:00
- st,lis2de12
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
Gyroscopes:
- st,l3g4200d-gyro
- st,lsm330d-gyro
- st,lsm330dl-gyro
- st,lsm330dlc-gyro
- st,l3gd20-gyro
dt-bindings: iio: gyro: add L3GD20H sensor device binding Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-20 03:04:31 +07:00
- st,l3gd20h-gyro
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
- st,l3g4is-gyro
- st,lsm330-gyro
iio: st_gyro: Add lsm9ds0-gyro support This device has an identical interface to other supported sensors and the patch only adds IDs. Signed-off-by: Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19 19:02:11 +07:00
- st,lsm9ds0-gyro
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
Magnetometers:
iio: st-magn: add support for lsm303agr magnetometer This adds support for the lsm303agr magnetometer. Signed-off-by: Giuseppe Barba <giuseppe.barba@st.com> Acked-by: Denis Ciocca <denis.ciocca@st.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-07-21 15:35:45 +07:00
- st,lsm303agr-magn
iio: magnetometer: support for lsm303dlh The LSM303DLH accelerometer/magnetometer has a different device identification method than using register 0x0f, instead three registers contain a magic value. We rely on WhoAmI to be zero for this variant. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2015-04-30 20:15:50 +07:00
- st,lsm303dlh-magn
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
- st,lsm303dlhc-magn
- st,lsm303dlm-magn
- st,lis3mdl-magn
dt-bindings: iio: magn: add LIS2MDL sensor device binding Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-08-17 00:02:53 +07:00
- st,lis2mdl
dt-bindings: iio: magn: add LSM9DS1 bindings Add DT binding documentation for the LSM9DS1 magnetometer. Signed-off-by: Martin Kelly <martin@martingkelly.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2018-10-26 09:38:12 +07:00
- st,lsm9ds1-magn
iio: st_sensors: add device tree bindings This adds some basic, simple device tree bindings to the STMicro MEMS sensor drivers. Cc: devicetree@vger.kernel.org Cc: Lee Jones <lee.jones@linaro.org> Cc: Denis CIOCCA <denis.ciocca@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2014-07-07 16:48:00 +07:00
Pressure sensors:
- st,lps001wp-press
- st,lps25h-press
- st,lps331ap-press
iio:st_pressure:initial lps22hb sensor support Initial support for ST LPS22HB pressure sensor. Datasheet: http://www2.st.com/resource/en/datasheet/lps22hb.pdf Features: * pressure data and timestamping channels * sampling frequency selection * interrupt based trigger * over I2C or SPI Signed-off-by: Gregor Boirie <gregor.boirie@parrot.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2016-04-19 16:18:32 +07:00
- st,lps22hb-press
dt-bindings: iio: pressure: add LPS33HW and LPS35HW device bindings Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-09-03 00:39:15 +07:00
- st,lps33hw
- st,lps35hw
dt-bindings: iio: pressure: add LPS22HH bindings Fix following checkpatch warnings: WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/ .compatible = "st,lps22hh", WARNING: DT compatible string "st,lps22hh" appears un-documented -- check ./Documentation/devicetree/bindings/ .compatible = "st,lps22hh", Fixes: e5aab7b0d88d ("iio:st_pressure:initial lps22hh sensor support") Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-01-20 03:47:53 +07:00
- st,lps22hh
Reference in New Issue Copy Permalink