linux_dsm_epyc7002/arch/arm/mach-mvebu/platsmp-a9.c

103 lines
2.8 KiB
C
Raw Normal View History

/*
* Symmetric Multi Processing (SMP) support for Marvell EBU Cortex-A9
* based SOCs (Armada 375/38x).
*
* Copyright (C) 2014 Marvell
*
* Gregory CLEMENT <gregory.clement@free-electrons.com>
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/smp.h>
#include <linux/mbus.h>
#include <asm/smp_scu.h>
#include <asm/smp_plat.h>
#include "common.h"
#include "mvebu-soc-id.h"
#include "pmsu.h"
#define CRYPT0_ENG_ID 41
#define CRYPT0_ENG_ATTR 0x1
#define SRAM_PHYS_BASE 0xFFFF0000
#define BOOTROM_BASE 0xFFF00000
#define BOOTROM_SIZE 0x100000
extern unsigned char armada_375_smp_cpu1_enable_code_end;
extern unsigned char armada_375_smp_cpu1_enable_code_start;
void armada_375_smp_cpu1_enable_wa(void)
{
void __iomem *sram_virt_base;
mvebu_mbus_del_window(BOOTROM_BASE, BOOTROM_SIZE);
mvebu_mbus_add_window_by_id(CRYPT0_ENG_ID, CRYPT0_ENG_ATTR,
SRAM_PHYS_BASE, SZ_64K);
sram_virt_base = ioremap(SRAM_PHYS_BASE, SZ_64K);
memcpy(sram_virt_base, &armada_375_smp_cpu1_enable_code_start,
&armada_375_smp_cpu1_enable_code_end
- &armada_375_smp_cpu1_enable_code_start);
}
extern void mvebu_cortex_a9_secondary_startup(void);
static int __cpuinit mvebu_cortex_a9_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
int ret, hw_cpu;
pr_info("Booting CPU %d\n", cpu);
/*
* Write the address of secondary startup into the system-wide
* flags register. The boot monitor waits until it receives a
* soft interrupt, and then the secondary CPU branches to this
* address.
*/
hw_cpu = cpu_logical_map(cpu);
if (of_machine_is_compatible("marvell,armada375")) {
u32 dev, rev;
if (mvebu_get_soc_id(&dev, &rev) == 0 &&
rev == ARMADA_375_Z1_REV)
armada_375_smp_cpu1_enable_wa();
mvebu_system_controller_set_cpu_boot_addr(mvebu_cortex_a9_secondary_startup);
}
else {
mvebu_pmsu_set_cpu_boot_addr(hw_cpu,
mvebu_cortex_a9_secondary_startup);
}
smp_wmb();
ret = mvebu_cpu_reset_deassert(hw_cpu);
if (ret) {
pr_err("Could not start the secondary CPU: %d\n", ret);
return ret;
}
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
.smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
#ifdef CONFIG_HOTPLUG_CPU
.cpu_die = armada_xp_cpu_die,
#endif
};
CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
&mvebu_cortex_a9_smp_ops);
CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
&mvebu_cortex_a9_smp_ops);