linux_dsm_epyc7002/include/linux/random.h

195 lines
5.1 KiB
C
Raw Normal View History

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 21:07:57 +07:00
/* SPDX-License-Identifier: GPL-2.0 */
/*
* include/linux/random.h
*
* Include file for the random number generator.
*/
#ifndef _LINUX_RANDOM_H
#define _LINUX_RANDOM_H
#include <linux/list.h>
#include <linux/once.h>
#include <uapi/linux/random.h>
struct random_ready_callback {
struct list_head list;
void (*func)(struct random_ready_callback *rdy);
struct module *owner;
};
extern void add_device_randomness(const void *, unsigned int);
extern void add_bootloader_randomness(const void *, unsigned int);
gcc-plugins: Add latent_entropy plugin This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals. The need for very-early boot entropy tends to be very architecture or system design specific, so this plugin is more suited for those sorts of special cases. The existing kernel RNG already attempts to extract entropy from reliable runtime variation, but this plugin takes the idea to a logical extreme by permuting a global variable based on any variation in code execution (e.g. a different value (and permutation function) is used to permute the global based on loop count, case statement, if/then/else branching, etc). To do this, the plugin starts by inserting a local variable in every marked function. The plugin then adds logic so that the value of this variable is modified by randomly chosen operations (add, xor and rol) and random values (gcc generates separate static values for each location at compile time and also injects the stack pointer at runtime). The resulting value depends on the control flow path (e.g., loops and branches taken). Before the function returns, the plugin mixes this local variable into the latent_entropy global variable. The value of this global variable is added to the kernel entropy pool in do_one_initcall() and _do_fork(), though it does not credit any bytes of entropy to the pool; the contents of the global are just used to mix the pool. Additionally, the plugin can pre-initialize arrays with build-time random contents, so that two different kernel builds running on identical hardware will not have the same starting values. Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: expanded commit message and code comments] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-06-21 01:41:19 +07:00
latent_entropy: avoid build error when plugin cflags are not set Some architectures set up CFLAGS for linux decompressor phase from scratch and do not include GCC_PLUGINS_CFLAGS. Since "latent_entropy" variable declaration is generated by the plugin code itself including linux/random.h in decompressor code then would cause a build error. E.g. on s390: In file included from ./include/linux/net.h:22, from ./include/linux/skbuff.h:29, from ./include/linux/if_ether.h:23, from ./arch/s390/include/asm/diag.h:12, from arch/s390/boot/startup.c:8: ./include/linux/random.h: In function 'add_latent_entropy': ./include/linux/random.h:26:39: error: 'latent_entropy' undeclared (first use in this function); did you mean 'add_latent_entropy'? 26 | add_device_randomness((const void *)&latent_entropy, | ^~~~~~~~~~~~~~ | add_latent_entropy ./include/linux/random.h:26:39: note: each undeclared identifier is reported only once for each function it appears in The build error is triggered by commit a80313ff91ab ("s390/kernel: introduce .dma sections") which made it into 5.2 merge window. To address that avoid using CONFIG_GCC_PLUGIN_LATENT_ENTROPY in favour of LATENT_ENTROPY_PLUGIN definition which is defined as a part of gcc plugins cflags and hence reflect more accurately when gcc plugin is active. Besides that it is also used for similar purpose in linux/compiler-gcc.h for latent_entropy attribute definition. Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2019-05-07 21:28:15 +07:00
#if defined(LATENT_ENTROPY_PLUGIN) && !defined(__CHECKER__)
gcc-plugins: Add latent_entropy plugin This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals. The need for very-early boot entropy tends to be very architecture or system design specific, so this plugin is more suited for those sorts of special cases. The existing kernel RNG already attempts to extract entropy from reliable runtime variation, but this plugin takes the idea to a logical extreme by permuting a global variable based on any variation in code execution (e.g. a different value (and permutation function) is used to permute the global based on loop count, case statement, if/then/else branching, etc). To do this, the plugin starts by inserting a local variable in every marked function. The plugin then adds logic so that the value of this variable is modified by randomly chosen operations (add, xor and rol) and random values (gcc generates separate static values for each location at compile time and also injects the stack pointer at runtime). The resulting value depends on the control flow path (e.g., loops and branches taken). Before the function returns, the plugin mixes this local variable into the latent_entropy global variable. The value of this global variable is added to the kernel entropy pool in do_one_initcall() and _do_fork(), though it does not credit any bytes of entropy to the pool; the contents of the global are just used to mix the pool. Additionally, the plugin can pre-initialize arrays with build-time random contents, so that two different kernel builds running on identical hardware will not have the same starting values. Signed-off-by: Emese Revfy <re.emese@gmail.com> [kees: expanded commit message and code comments] Signed-off-by: Kees Cook <keescook@chromium.org>
2016-06-21 01:41:19 +07:00
static inline void add_latent_entropy(void)
{
add_device_randomness((const void *)&latent_entropy,
sizeof(latent_entropy));
}
#else
static inline void add_latent_entropy(void) {}
#endif
extern void add_input_randomness(unsigned int type, unsigned int code,
unsigned int value) __latent_entropy;
extern void add_interrupt_randomness(int irq, int irq_flags) __latent_entropy;
extern void get_random_bytes(void *buf, int nbytes);
extern int wait_for_random_bytes(void);
extern int __init rand_initialize(void);
extern bool rng_is_initialized(void);
extern int add_random_ready_callback(struct random_ready_callback *rdy);
extern void del_random_ready_callback(struct random_ready_callback *rdy);
extern int __must_check get_random_bytes_arch(void *buf, int nbytes);
#ifndef MODULE
extern const struct file_operations random_fops, urandom_fops;
#endif
u32 get_random_u32(void);
u64 get_random_u64(void);
static inline unsigned int get_random_int(void)
{
return get_random_u32();
}
static inline unsigned long get_random_long(void)
{
#if BITS_PER_LONG == 64
return get_random_u64();
#else
return get_random_u32();
#endif
}
random,stackprotect: introduce get_random_canary function Patch series "stackprotector: ascii armor the stack canary", v2. Zero out the first byte of the stack canary value on 64 bit systems, in order to mitigate unterminated C string overflows. The null byte both prevents C string functions from reading the canary, and from writing it if the canary value were guessed or obtained through some other means. Reducing the entropy by 8 bits is acceptable on 64-bit systems, which will still have 56 bits of entropy left, but not on 32 bit systems, so the "ascii armor" canary is only implemented on 64-bit systems. Inspired by the "ascii armor" code in execshield and Daniel Micay's linux-hardened tree. Also see https://github.com/thestinger/linux-hardened/ This patch (of 5): Introduce get_random_canary(), which provides a random unsigned long canary value with the first byte zeroed out on 64 bit architectures, in order to mitigate non-terminated C string overflows. The null byte both prevents C string functions from reading the canary, and from writing it if the canary value were guessed or obtained through some other means. Reducing the entropy by 8 bits is acceptable on 64-bit systems, which will still have 56 bits of entropy left, but not on 32 bit systems, so the "ascii armor" canary is only implemented on 64-bit systems. Inspired by the "ascii armor" code in the old execshield patches, and Daniel Micay's linux-hardened tree. Link: http://lkml.kernel.org/r/20170524155751.424-2-riel@redhat.com Signed-off-by: Rik van Riel <riel@redhat.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Daniel Micay <danielmicay@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ingo Molnar <mingo@kernel.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-13 04:36:17 +07:00
/*
* On 64-bit architectures, protect against non-terminated C string overflows
* by zeroing out the first byte of the canary; this leaves 56 bits of entropy.
*/
#ifdef CONFIG_64BIT
# ifdef __LITTLE_ENDIAN
# define CANARY_MASK 0xffffffffffffff00UL
# else /* big endian, 64 bits: */
# define CANARY_MASK 0x00ffffffffffffffUL
# endif
#else /* 32 bits: */
# define CANARY_MASK 0xffffffffUL
#endif
static inline unsigned long get_random_canary(void)
{
unsigned long val = get_random_long();
return val & CANARY_MASK;
}
/* Calls wait_for_random_bytes() and then calls get_random_bytes(buf, nbytes).
* Returns the result of the call to wait_for_random_bytes. */
static inline int get_random_bytes_wait(void *buf, int nbytes)
{
int ret = wait_for_random_bytes();
get_random_bytes(buf, nbytes);
return ret;
}
#define declare_get_random_var_wait(var) \
static inline int get_random_ ## var ## _wait(var *out) { \
int ret = wait_for_random_bytes(); \
if (unlikely(ret)) \
return ret; \
*out = get_random_ ## var(); \
return 0; \
}
declare_get_random_var_wait(u32)
declare_get_random_var_wait(u64)
declare_get_random_var_wait(int)
declare_get_random_var_wait(long)
#undef declare_get_random_var
random: simplify API for random address requests To date, all callers of randomize_range() have set the length to 0, and check for a zero return value. For the current callers, the only way to get zero returned is if end <= start. Since they are all adding a constant to the start address, this is unnecessary. We can remove a bunch of needless checks by simplifying the API to do just what everyone wants, return an address between [start, start + range). While we're here, s/get_random_int/get_random_long/. No current call site is adversely affected by get_random_int(), since all current range requests are < UINT_MAX. However, we should match caller expectations to avoid coming up short (ha!) in the future. All current callers to randomize_range() chose to use the start address if randomize_range() failed. Therefore, we simplify things by just returning the start address on error. randomize_range() will be removed once all callers have been converted over to randomize_addr(). Link: http://lkml.kernel.org/r/20160803233913.32511-2-jason@lakedaemon.net Signed-off-by: Jason Cooper <jason@lakedaemon.net> Acked-by: Kees Cook <keescook@chromium.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Roberts, William C" <william.c.roberts@intel.com> Cc: Yann Droneaud <ydroneaud@opteya.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: Nick Kralevich <nnk@google.com> Cc: Jeffrey Vander Stoep <jeffv@google.com> Cc: Daniel Cashman <dcashman@android.com> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-12 03:53:52 +07:00
unsigned long randomize_page(unsigned long start, unsigned long range);
random32: rename random32 to prandom This renames all random32 functions to have 'prandom_' prefix as follows: void prandom_seed(u32 seed); /* rename from srandom32() */ u32 prandom_u32(void); /* rename from random32() */ void prandom_seed_state(struct rnd_state *state, u64 seed); /* rename from prandom32_seed() */ u32 prandom_u32_state(struct rnd_state *state); /* rename from prandom32() */ The purpose of this renaming is to prevent some kernel developers from assuming that prandom32() and random32() might imply that only prandom32() was the one using a pseudo-random number generator by prandom32's "p", and the result may be a very embarassing security exposure. This concern was expressed by Theodore Ts'o. And furthermore, I'm going to introduce new functions for getting the requested number of pseudo-random bytes. If I continue to use both prandom32 and random32 prefixes for these functions, the confusion is getting worse. As a result of this renaming, "prandom_" is the common prefix for pseudo-random number library. Currently, srandom32() and random32() are preserved because it is difficult to rename too many users at once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Robert Love <robert.w.love@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: David Laight <david.laight@aculab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:04:23 +07:00
u32 prandom_u32(void);
random32: improvements to prandom_bytes This patch addresses a couple of minor items, mostly addesssing prandom_bytes(): 1) prandom_bytes{,_state}() should use size_t for length arguments, 2) We can use put_unaligned() when filling the array instead of open coding it [ perhaps some archs will further benefit from their own arch specific implementation when GCC cannot make up for it ], 3) Fix a typo, 4) Better use unsigned int as type for getting the arch seed, 5) Make use of prandom_u32_max() for timer slack. Regarding the change to put_unaligned(), callers of prandom_bytes() which internally invoke prandom_bytes_state(), don't bother as they expect the array to be filled randomly and don't have any control of the internal state what-so-ever (that's also why we have periodic reseeding there, etc), so they really don't care. Now for the direct callers of prandom_bytes_state(), which are solely located in test cases for MTD devices, that is, drivers/mtd/tests/{oobtest.c,pagetest.c,subpagetest.c}: These tests basically fill a test write-vector through prandom_bytes_state() with an a-priori defined seed each time and write that to a MTD device. Later on, they set up a read-vector and read back that blocks from the device. So in the verification phase, the write-vector is being re-setup [ so same seed and prandom_bytes_state() called ], and then memcmp()'ed against the read-vector to check if the data is the same. Akinobu, Lothar and I also tested this patch and it runs through the 3 relevant MTD test cases w/o any errors on the nandsim device (simulator for MTD devs) for x86_64, ppc64, ARM (i.MX28, i.MX53 and i.MX6): # modprobe nandsim first_id_byte=0x20 second_id_byte=0xac \ third_id_byte=0x00 fourth_id_byte=0x15 # modprobe mtd_oobtest dev=0 # modprobe mtd_pagetest dev=0 # modprobe mtd_subpagetest dev=0 We also don't have any users depending directly on a particular result of the PRNG (except the PRNG self-test itself), and that's just fine as it e.g. allowed us easily to do things like upgrading from taus88 to taus113. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-23 22:03:28 +07:00
void prandom_bytes(void *buf, size_t nbytes);
random32: rename random32 to prandom This renames all random32 functions to have 'prandom_' prefix as follows: void prandom_seed(u32 seed); /* rename from srandom32() */ u32 prandom_u32(void); /* rename from random32() */ void prandom_seed_state(struct rnd_state *state, u64 seed); /* rename from prandom32_seed() */ u32 prandom_u32_state(struct rnd_state *state); /* rename from prandom32() */ The purpose of this renaming is to prevent some kernel developers from assuming that prandom32() and random32() might imply that only prandom32() was the one using a pseudo-random number generator by prandom32's "p", and the result may be a very embarassing security exposure. This concern was expressed by Theodore Ts'o. And furthermore, I'm going to introduce new functions for getting the requested number of pseudo-random bytes. If I continue to use both prandom32 and random32 prefixes for these functions, the confusion is getting worse. As a result of this renaming, "prandom_" is the common prefix for pseudo-random number library. Currently, srandom32() and random32() are preserved because it is difficult to rename too many users at once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Robert Love <robert.w.love@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: David Laight <david.laight@aculab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:04:23 +07:00
void prandom_seed(u32 seed);
void prandom_reseed_late(void);
struct rnd_state {
random32: upgrade taus88 generator to taus113 from errata paper Since we use prandom*() functions quite often in networking code i.e. in UDP port selection, netfilter code, etc, upgrade the PRNG from Pierre L'Ecuyer's original paper "Maximally Equidistributed Combined Tausworthe Generators", Mathematics of Computation, 65, 213 (1996), 203--213 to the version published in his errata paper [1]. The Tausworthe generator is a maximally-equidistributed generator, that is fast and has good statistical properties [1]. The version presented there upgrades the 3 state LFSR to a 4 state LFSR with increased periodicity from about 2^88 to 2^113. The algorithm is presented in [1] by the very same author who also designed the original algorithm in [2]. Also, by increasing the state, we make it a bit harder for attackers to "guess" the PRNGs internal state. See also discussion in [3]. Now, as we use this sort of weak initialization discussed in [3] only between core_initcall() until late_initcall() time [*] for prandom32*() users, namely in prandom_init(), it is less relevant from late_initcall() onwards as we overwrite seeds through prandom_reseed() anyways with a seed source of higher entropy, that is, get_random_bytes(). In other words, a exhaustive keysearch of 96 bit would be needed. Now, with the help of this patch, this state-search increases further to 128 bit. Initialization needs to make sure that s1 > 1, s2 > 7, s3 > 15, s4 > 127. taus88 and taus113 algorithm is also part of GSL. I added a test case in the next patch to verify internal behaviour of this patch with GSL and ran tests with the dieharder 3.31.1 RNG test suite: $ dieharder -g 052 -a -m 10 -s 1 -S 4137730333 #taus88 $ dieharder -g 054 -a -m 10 -s 1 -S 4137730333 #taus113 With this seed configuration, in order to compare both, we get the following differences: algorithm taus88 taus113 rands/second [**] 1.61e+08 1.37e+08 sts_serial(4, 1st run) WEAK PASSED sts_serial(9, 2nd run) WEAK PASSED rgb_lagged_sum(31) WEAK PASSED We took out diehard_sums test as according to the authors it is considered broken and unusable [4]. Despite that and the slight decrease in performance (which is acceptable), taus113 here passes all 113 tests (only rgb_minimum_distance_5 in WEAK, the rest PASSED). In general, taus/taus113 is considered "very good" by the authors of dieharder [5]. The papers [1][2] states a single warm-up step is sufficient by running quicktaus once on each state to ensure proper initialization of ~s_{0}: Our selection of (s) according to Table 1 of [1] row 1 holds the condition L - k <= r - s, that is, (32 32 32 32) - (31 29 28 25) <= (25 27 15 22) - (18 2 7 13) with r = k - q and q = (6 2 13 3) as also stated by the paper. So according to [2] we are safe with one round of quicktaus for initialization. However we decided to include the warm-up phase of the PRNG as done in GSL in every case as a safety net. We also use the warm up phase to make the output of the RNG easier to verify by the GSL output. In prandom_init(), we also mix random_get_entropy() into it, just like drivers/char/random.c does it, jiffies ^ random_get_entropy(). random-get_entropy() is get_cycles(). xor is entropy preserving so it is fine if it is not implemented by some architectures. Note, this PRNG is *not* used for cryptography in the kernel, but rather as a fast PRNG for various randomizations i.e. in the networking code, or elsewhere for debugging purposes, for example. [*]: In order to generate some "sort of pseduo-randomness", since get_random_bytes() is not yet available for us, we use jiffies and initialize states s1 - s3 with a simple linear congruential generator (LCG), that is x <- x * 69069; and derive s2, s3, from the 32bit initialization from s1. So the above quote from [3] accounts only for the time from core to late initcall, not afterwards. [**] Single threaded run on MacBook Air w/ Intel Core i5-3317U [1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps [2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps [3] http://thread.gmane.org/gmane.comp.encryption.general/12103/ [4] http://code.google.com/p/dieharder/source/browse/trunk/libdieharder/diehard_sums.c?spec=svn490&r=490#20 [5] http://www.phy.duke.edu/~rgb/General/dieharder.php Joint work with Hannes Frederic Sowa. Cc: Florian Weimer <fweimer@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 18:20:36 +07:00
__u32 s1, s2, s3, s4;
};
random32: upgrade taus88 generator to taus113 from errata paper Since we use prandom*() functions quite often in networking code i.e. in UDP port selection, netfilter code, etc, upgrade the PRNG from Pierre L'Ecuyer's original paper "Maximally Equidistributed Combined Tausworthe Generators", Mathematics of Computation, 65, 213 (1996), 203--213 to the version published in his errata paper [1]. The Tausworthe generator is a maximally-equidistributed generator, that is fast and has good statistical properties [1]. The version presented there upgrades the 3 state LFSR to a 4 state LFSR with increased periodicity from about 2^88 to 2^113. The algorithm is presented in [1] by the very same author who also designed the original algorithm in [2]. Also, by increasing the state, we make it a bit harder for attackers to "guess" the PRNGs internal state. See also discussion in [3]. Now, as we use this sort of weak initialization discussed in [3] only between core_initcall() until late_initcall() time [*] for prandom32*() users, namely in prandom_init(), it is less relevant from late_initcall() onwards as we overwrite seeds through prandom_reseed() anyways with a seed source of higher entropy, that is, get_random_bytes(). In other words, a exhaustive keysearch of 96 bit would be needed. Now, with the help of this patch, this state-search increases further to 128 bit. Initialization needs to make sure that s1 > 1, s2 > 7, s3 > 15, s4 > 127. taus88 and taus113 algorithm is also part of GSL. I added a test case in the next patch to verify internal behaviour of this patch with GSL and ran tests with the dieharder 3.31.1 RNG test suite: $ dieharder -g 052 -a -m 10 -s 1 -S 4137730333 #taus88 $ dieharder -g 054 -a -m 10 -s 1 -S 4137730333 #taus113 With this seed configuration, in order to compare both, we get the following differences: algorithm taus88 taus113 rands/second [**] 1.61e+08 1.37e+08 sts_serial(4, 1st run) WEAK PASSED sts_serial(9, 2nd run) WEAK PASSED rgb_lagged_sum(31) WEAK PASSED We took out diehard_sums test as according to the authors it is considered broken and unusable [4]. Despite that and the slight decrease in performance (which is acceptable), taus113 here passes all 113 tests (only rgb_minimum_distance_5 in WEAK, the rest PASSED). In general, taus/taus113 is considered "very good" by the authors of dieharder [5]. The papers [1][2] states a single warm-up step is sufficient by running quicktaus once on each state to ensure proper initialization of ~s_{0}: Our selection of (s) according to Table 1 of [1] row 1 holds the condition L - k <= r - s, that is, (32 32 32 32) - (31 29 28 25) <= (25 27 15 22) - (18 2 7 13) with r = k - q and q = (6 2 13 3) as also stated by the paper. So according to [2] we are safe with one round of quicktaus for initialization. However we decided to include the warm-up phase of the PRNG as done in GSL in every case as a safety net. We also use the warm up phase to make the output of the RNG easier to verify by the GSL output. In prandom_init(), we also mix random_get_entropy() into it, just like drivers/char/random.c does it, jiffies ^ random_get_entropy(). random-get_entropy() is get_cycles(). xor is entropy preserving so it is fine if it is not implemented by some architectures. Note, this PRNG is *not* used for cryptography in the kernel, but rather as a fast PRNG for various randomizations i.e. in the networking code, or elsewhere for debugging purposes, for example. [*]: In order to generate some "sort of pseduo-randomness", since get_random_bytes() is not yet available for us, we use jiffies and initialize states s1 - s3 with a simple linear congruential generator (LCG), that is x <- x * 69069; and derive s2, s3, from the 32bit initialization from s1. So the above quote from [3] accounts only for the time from core to late initcall, not afterwards. [**] Single threaded run on MacBook Air w/ Intel Core i5-3317U [1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps [2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps [3] http://thread.gmane.org/gmane.comp.encryption.general/12103/ [4] http://code.google.com/p/dieharder/source/browse/trunk/libdieharder/diehard_sums.c?spec=svn490&r=490#20 [5] http://www.phy.duke.edu/~rgb/General/dieharder.php Joint work with Hannes Frederic Sowa. Cc: Florian Weimer <fweimer@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 18:20:36 +07:00
u32 prandom_u32_state(struct rnd_state *state);
random32: improvements to prandom_bytes This patch addresses a couple of minor items, mostly addesssing prandom_bytes(): 1) prandom_bytes{,_state}() should use size_t for length arguments, 2) We can use put_unaligned() when filling the array instead of open coding it [ perhaps some archs will further benefit from their own arch specific implementation when GCC cannot make up for it ], 3) Fix a typo, 4) Better use unsigned int as type for getting the arch seed, 5) Make use of prandom_u32_max() for timer slack. Regarding the change to put_unaligned(), callers of prandom_bytes() which internally invoke prandom_bytes_state(), don't bother as they expect the array to be filled randomly and don't have any control of the internal state what-so-ever (that's also why we have periodic reseeding there, etc), so they really don't care. Now for the direct callers of prandom_bytes_state(), which are solely located in test cases for MTD devices, that is, drivers/mtd/tests/{oobtest.c,pagetest.c,subpagetest.c}: These tests basically fill a test write-vector through prandom_bytes_state() with an a-priori defined seed each time and write that to a MTD device. Later on, they set up a read-vector and read back that blocks from the device. So in the verification phase, the write-vector is being re-setup [ so same seed and prandom_bytes_state() called ], and then memcmp()'ed against the read-vector to check if the data is the same. Akinobu, Lothar and I also tested this patch and it runs through the 3 relevant MTD test cases w/o any errors on the nandsim device (simulator for MTD devs) for x86_64, ppc64, ARM (i.MX28, i.MX53 and i.MX6): # modprobe nandsim first_id_byte=0x20 second_id_byte=0xac \ third_id_byte=0x00 fourth_id_byte=0x15 # modprobe mtd_oobtest dev=0 # modprobe mtd_pagetest dev=0 # modprobe mtd_subpagetest dev=0 We also don't have any users depending directly on a particular result of the PRNG (except the PRNG self-test itself), and that's just fine as it e.g. allowed us easily to do things like upgrading from taus88 to taus113. Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Tested-by: Akinobu Mita <akinobu.mita@gmail.com> Tested-by: Lothar Waßmann <LW@KARO-electronics.de> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-08-23 22:03:28 +07:00
void prandom_bytes_state(struct rnd_state *state, void *buf, size_t nbytes);
void prandom_seed_full_state(struct rnd_state __percpu *pcpu_state);
#define prandom_init_once(pcpu_state) \
DO_ONCE(prandom_seed_full_state, (pcpu_state))
/**
* prandom_u32_max - returns a pseudo-random number in interval [0, ep_ro)
* @ep_ro: right open interval endpoint
*
* Returns a pseudo-random number that is in interval [0, ep_ro). Note
* that the result depends on PRNG being well distributed in [0, ~0U]
* u32 space. Here we use maximally equidistributed combined Tausworthe
* generator, that is, prandom_u32(). This is useful when requesting a
* random index of an array containing ep_ro elements, for example.
*
* Returns: pseudo-random number in interval [0, ep_ro)
*/
static inline u32 prandom_u32_max(u32 ep_ro)
{
return (u32)(((u64) prandom_u32() * ep_ro) >> 32);
}
/*
* Handle minimum values for seeds
*/
static inline u32 __seed(u32 x, u32 m)
{
return (x < m) ? x + m : x;
}
/**
random32: rename random32 to prandom This renames all random32 functions to have 'prandom_' prefix as follows: void prandom_seed(u32 seed); /* rename from srandom32() */ u32 prandom_u32(void); /* rename from random32() */ void prandom_seed_state(struct rnd_state *state, u64 seed); /* rename from prandom32_seed() */ u32 prandom_u32_state(struct rnd_state *state); /* rename from prandom32() */ The purpose of this renaming is to prevent some kernel developers from assuming that prandom32() and random32() might imply that only prandom32() was the one using a pseudo-random number generator by prandom32's "p", and the result may be a very embarassing security exposure. This concern was expressed by Theodore Ts'o. And furthermore, I'm going to introduce new functions for getting the requested number of pseudo-random bytes. If I continue to use both prandom32 and random32 prefixes for these functions, the confusion is getting worse. As a result of this renaming, "prandom_" is the common prefix for pseudo-random number library. Currently, srandom32() and random32() are preserved because it is difficult to rename too many users at once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Robert Love <robert.w.love@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: David Laight <david.laight@aculab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:04:23 +07:00
* prandom_seed_state - set seed for prandom_u32_state().
* @state: pointer to state structure to receive the seed.
* @seed: arbitrary 64-bit value to use as a seed.
*/
random32: rename random32 to prandom This renames all random32 functions to have 'prandom_' prefix as follows: void prandom_seed(u32 seed); /* rename from srandom32() */ u32 prandom_u32(void); /* rename from random32() */ void prandom_seed_state(struct rnd_state *state, u64 seed); /* rename from prandom32_seed() */ u32 prandom_u32_state(struct rnd_state *state); /* rename from prandom32() */ The purpose of this renaming is to prevent some kernel developers from assuming that prandom32() and random32() might imply that only prandom32() was the one using a pseudo-random number generator by prandom32's "p", and the result may be a very embarassing security exposure. This concern was expressed by Theodore Ts'o. And furthermore, I'm going to introduce new functions for getting the requested number of pseudo-random bytes. If I continue to use both prandom32 and random32 prefixes for these functions, the confusion is getting worse. As a result of this renaming, "prandom_" is the common prefix for pseudo-random number library. Currently, srandom32() and random32() are preserved because it is difficult to rename too many users at once. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Robert Love <robert.w.love@intel.com> Cc: Michel Lespinasse <walken@google.com> Cc: Valdis Kletnieks <valdis.kletnieks@vt.edu> Cc: David Laight <david.laight@aculab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-12-18 07:04:23 +07:00
static inline void prandom_seed_state(struct rnd_state *state, u64 seed)
{
u32 i = (seed >> 32) ^ (seed << 10) ^ seed;
random32: upgrade taus88 generator to taus113 from errata paper Since we use prandom*() functions quite often in networking code i.e. in UDP port selection, netfilter code, etc, upgrade the PRNG from Pierre L'Ecuyer's original paper "Maximally Equidistributed Combined Tausworthe Generators", Mathematics of Computation, 65, 213 (1996), 203--213 to the version published in his errata paper [1]. The Tausworthe generator is a maximally-equidistributed generator, that is fast and has good statistical properties [1]. The version presented there upgrades the 3 state LFSR to a 4 state LFSR with increased periodicity from about 2^88 to 2^113. The algorithm is presented in [1] by the very same author who also designed the original algorithm in [2]. Also, by increasing the state, we make it a bit harder for attackers to "guess" the PRNGs internal state. See also discussion in [3]. Now, as we use this sort of weak initialization discussed in [3] only between core_initcall() until late_initcall() time [*] for prandom32*() users, namely in prandom_init(), it is less relevant from late_initcall() onwards as we overwrite seeds through prandom_reseed() anyways with a seed source of higher entropy, that is, get_random_bytes(). In other words, a exhaustive keysearch of 96 bit would be needed. Now, with the help of this patch, this state-search increases further to 128 bit. Initialization needs to make sure that s1 > 1, s2 > 7, s3 > 15, s4 > 127. taus88 and taus113 algorithm is also part of GSL. I added a test case in the next patch to verify internal behaviour of this patch with GSL and ran tests with the dieharder 3.31.1 RNG test suite: $ dieharder -g 052 -a -m 10 -s 1 -S 4137730333 #taus88 $ dieharder -g 054 -a -m 10 -s 1 -S 4137730333 #taus113 With this seed configuration, in order to compare both, we get the following differences: algorithm taus88 taus113 rands/second [**] 1.61e+08 1.37e+08 sts_serial(4, 1st run) WEAK PASSED sts_serial(9, 2nd run) WEAK PASSED rgb_lagged_sum(31) WEAK PASSED We took out diehard_sums test as according to the authors it is considered broken and unusable [4]. Despite that and the slight decrease in performance (which is acceptable), taus113 here passes all 113 tests (only rgb_minimum_distance_5 in WEAK, the rest PASSED). In general, taus/taus113 is considered "very good" by the authors of dieharder [5]. The papers [1][2] states a single warm-up step is sufficient by running quicktaus once on each state to ensure proper initialization of ~s_{0}: Our selection of (s) according to Table 1 of [1] row 1 holds the condition L - k <= r - s, that is, (32 32 32 32) - (31 29 28 25) <= (25 27 15 22) - (18 2 7 13) with r = k - q and q = (6 2 13 3) as also stated by the paper. So according to [2] we are safe with one round of quicktaus for initialization. However we decided to include the warm-up phase of the PRNG as done in GSL in every case as a safety net. We also use the warm up phase to make the output of the RNG easier to verify by the GSL output. In prandom_init(), we also mix random_get_entropy() into it, just like drivers/char/random.c does it, jiffies ^ random_get_entropy(). random-get_entropy() is get_cycles(). xor is entropy preserving so it is fine if it is not implemented by some architectures. Note, this PRNG is *not* used for cryptography in the kernel, but rather as a fast PRNG for various randomizations i.e. in the networking code, or elsewhere for debugging purposes, for example. [*]: In order to generate some "sort of pseduo-randomness", since get_random_bytes() is not yet available for us, we use jiffies and initialize states s1 - s3 with a simple linear congruential generator (LCG), that is x <- x * 69069; and derive s2, s3, from the 32bit initialization from s1. So the above quote from [3] accounts only for the time from core to late initcall, not afterwards. [**] Single threaded run on MacBook Air w/ Intel Core i5-3317U [1] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme2.ps [2] http://www.iro.umontreal.ca/~lecuyer/myftp/papers/tausme.ps [3] http://thread.gmane.org/gmane.comp.encryption.general/12103/ [4] http://code.google.com/p/dieharder/source/browse/trunk/libdieharder/diehard_sums.c?spec=svn490&r=490#20 [5] http://www.phy.duke.edu/~rgb/General/dieharder.php Joint work with Hannes Frederic Sowa. Cc: Florian Weimer <fweimer@redhat.com> Cc: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-11 18:20:36 +07:00
state->s1 = __seed(i, 2U);
state->s2 = __seed(i, 8U);
state->s3 = __seed(i, 16U);
state->s4 = __seed(i, 128U);
}
#ifdef CONFIG_ARCH_RANDOM
# include <asm/archrandom.h>
#else
static inline bool __must_check arch_get_random_long(unsigned long *v)
{
return false;
}
static inline bool __must_check arch_get_random_int(unsigned int *v)
{
return false;
}
static inline bool __must_check arch_get_random_seed_long(unsigned long *v)
{
return false;
}
static inline bool __must_check arch_get_random_seed_int(unsigned int *v)
{
return false;
}
#endif
/* Pseudo random number generator from numerical recipes. */
static inline u32 next_pseudo_random32(u32 seed)
{
return seed * 1664525 + 1013904223;
}
#endif /* _LINUX_RANDOM_H */