drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
/*
|
|
|
|
* Copyright 2013 Red Hat Inc.
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
|
|
* to deal in the Software without restriction, including without limitation
|
|
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
|
|
* THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
|
|
|
|
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
|
|
|
|
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* Authors: Dave Airlie
|
|
|
|
* Alon Levy
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "qxl_drv.h"
|
|
|
|
#include "qxl_object.h"
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO: allocating a new gem(in qxl_bo) for each request.
|
|
|
|
* This is wasteful since bo's are page aligned.
|
|
|
|
*/
|
2013-04-16 10:24:25 +07:00
|
|
|
static int qxl_alloc_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
{
|
|
|
|
struct qxl_device *qdev = dev->dev_private;
|
|
|
|
struct drm_qxl_alloc *qxl_alloc = data;
|
|
|
|
int ret;
|
|
|
|
struct qxl_bo *qobj;
|
|
|
|
uint32_t handle;
|
|
|
|
u32 domain = QXL_GEM_DOMAIN_VRAM;
|
|
|
|
|
|
|
|
if (qxl_alloc->size == 0) {
|
|
|
|
DRM_ERROR("invalid size %d\n", qxl_alloc->size);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
ret = qxl_gem_object_create_with_handle(qdev, file_priv,
|
|
|
|
domain,
|
|
|
|
qxl_alloc->size,
|
|
|
|
NULL,
|
|
|
|
&qobj, &handle);
|
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("%s: failed to create gem ret=%d\n",
|
|
|
|
__func__, ret);
|
|
|
|
return -ENOMEM;
|
|
|
|
}
|
|
|
|
qxl_alloc->handle = handle;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-04-16 10:24:25 +07:00
|
|
|
static int qxl_map_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
{
|
|
|
|
struct qxl_device *qdev = dev->dev_private;
|
|
|
|
struct drm_qxl_map *qxl_map = data;
|
|
|
|
|
2017-01-27 08:05:48 +07:00
|
|
|
return qxl_mode_dumb_mmap(file_priv, &qdev->ddev, qxl_map->handle,
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
&qxl_map->offset);
|
|
|
|
}
|
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
struct qxl_reloc_info {
|
|
|
|
int type;
|
|
|
|
struct qxl_bo *dst_bo;
|
|
|
|
uint32_t dst_offset;
|
|
|
|
struct qxl_bo *src_bo;
|
|
|
|
int src_offset;
|
|
|
|
};
|
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
/*
|
|
|
|
* dst must be validated, i.e. whole bo on vram/surfacesram (right now all bo's
|
|
|
|
* are on vram).
|
|
|
|
* *(dst + dst_off) = qxl_bo_physical_address(src, src_off)
|
|
|
|
*/
|
|
|
|
static void
|
2013-07-23 11:16:42 +07:00
|
|
|
apply_reloc(struct qxl_device *qdev, struct qxl_reloc_info *info)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
{
|
|
|
|
void *reloc_page;
|
2018-10-27 02:22:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
reloc_page = qxl_bo_kmap_atomic_page(qdev, info->dst_bo, info->dst_offset & PAGE_MASK);
|
|
|
|
*(uint64_t *)(reloc_page + (info->dst_offset & ~PAGE_MASK)) = qxl_bo_physical_address(qdev,
|
|
|
|
info->src_bo,
|
|
|
|
info->src_offset);
|
|
|
|
qxl_bo_kunmap_atomic_page(qdev, info->dst_bo, reloc_page);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
2013-07-23 11:16:42 +07:00
|
|
|
apply_surf_reloc(struct qxl_device *qdev, struct qxl_reloc_info *info)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
{
|
|
|
|
uint32_t id = 0;
|
|
|
|
void *reloc_page;
|
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
if (info->src_bo && !info->src_bo->is_primary)
|
|
|
|
id = info->src_bo->surface_id;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
reloc_page = qxl_bo_kmap_atomic_page(qdev, info->dst_bo, info->dst_offset & PAGE_MASK);
|
|
|
|
*(uint32_t *)(reloc_page + (info->dst_offset & ~PAGE_MASK)) = id;
|
|
|
|
qxl_bo_kunmap_atomic_page(qdev, info->dst_bo, reloc_page);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* return holding the reference to this object */
|
2016-05-09 17:04:54 +07:00
|
|
|
static int qxlhw_handle_to_bo(struct drm_file *file_priv, uint64_t handle,
|
2015-06-03 18:09:19 +07:00
|
|
|
struct qxl_release *release, struct qxl_bo **qbo_p)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
{
|
|
|
|
struct drm_gem_object *gobj;
|
|
|
|
struct qxl_bo *qobj;
|
|
|
|
int ret;
|
|
|
|
|
2016-05-09 17:04:54 +07:00
|
|
|
gobj = drm_gem_object_lookup(file_priv, handle);
|
2013-07-23 11:16:42 +07:00
|
|
|
if (!gobj)
|
2015-06-03 18:09:19 +07:00
|
|
|
return -EINVAL;
|
2013-07-23 11:16:42 +07:00
|
|
|
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
qobj = gem_to_qxl_bo(gobj);
|
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
ret = qxl_release_list_add(release, qobj);
|
2018-03-21 01:29:27 +07:00
|
|
|
drm_gem_object_put_unlocked(gobj);
|
2015-06-03 18:09:18 +07:00
|
|
|
if (ret)
|
2015-06-03 18:09:19 +07:00
|
|
|
return ret;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2015-06-03 18:09:19 +07:00
|
|
|
*qbo_p = qobj;
|
|
|
|
return 0;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Usage of execbuffer:
|
|
|
|
* Relocations need to take into account the full QXLDrawable size.
|
|
|
|
* However, the command as passed from user space must *not* contain the initial
|
|
|
|
* QXLReleaseInfo struct (first XXX bytes)
|
|
|
|
*/
|
2013-07-23 11:16:42 +07:00
|
|
|
static int qxl_process_single_command(struct qxl_device *qdev,
|
|
|
|
struct drm_qxl_command *cmd,
|
|
|
|
struct drm_file *file_priv)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
{
|
2013-07-23 11:16:42 +07:00
|
|
|
struct qxl_reloc_info *reloc_info;
|
|
|
|
int release_type;
|
|
|
|
struct qxl_release *release;
|
|
|
|
struct qxl_bo *cmd_bo;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
void *fb_cmd;
|
2015-06-03 18:09:18 +07:00
|
|
|
int i, ret, num_relocs;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
int unwritten;
|
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
switch (cmd->type) {
|
|
|
|
case QXL_CMD_DRAW:
|
|
|
|
release_type = QXL_RELEASE_DRAWABLE;
|
|
|
|
break;
|
|
|
|
case QXL_CMD_SURFACE:
|
|
|
|
case QXL_CMD_CURSOR:
|
|
|
|
default:
|
|
|
|
DRM_DEBUG("Only draw commands in execbuffers\n");
|
|
|
|
return -EINVAL;
|
|
|
|
break;
|
|
|
|
}
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
if (cmd->command_size > PAGE_SIZE - sizeof(union qxl_release_info))
|
|
|
|
return -EINVAL;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.
It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access. But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.
A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model. And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.
This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.
There were a couple of notable cases:
- csky still had the old "verify_area()" name as an alias.
- the iter_iov code had magical hardcoded knowledge of the actual
values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
really used it)
- microblaze used the type argument for a debug printout
but other than those oddities this should be a total no-op patch.
I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something. Any missed conversion should be trivially fixable, though.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 09:57:57 +07:00
|
|
|
if (!access_ok(u64_to_user_ptr(cmd->command),
|
2013-07-23 11:16:42 +07:00
|
|
|
cmd->command_size))
|
|
|
|
return -EFAULT;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2016-02-16 20:25:00 +07:00
|
|
|
reloc_info = kmalloc_array(cmd->relocs_num,
|
|
|
|
sizeof(struct qxl_reloc_info), GFP_KERNEL);
|
2013-07-23 11:16:42 +07:00
|
|
|
if (!reloc_info)
|
|
|
|
return -ENOMEM;
|
2013-06-28 10:27:40 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
ret = qxl_alloc_release_reserved(qdev,
|
|
|
|
sizeof(union qxl_release_info) +
|
|
|
|
cmd->command_size,
|
|
|
|
release_type,
|
|
|
|
&release,
|
|
|
|
&cmd_bo);
|
|
|
|
if (ret)
|
|
|
|
goto out_free_reloc;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
/* TODO copy slow path code from i915 */
|
2018-04-18 12:42:56 +07:00
|
|
|
fb_cmd = qxl_bo_kmap_atomic_page(qdev, cmd_bo, (release->release_offset & PAGE_MASK));
|
2017-06-20 18:39:14 +07:00
|
|
|
unwritten = __copy_from_user_inatomic_nocache
|
2018-04-18 12:42:56 +07:00
|
|
|
(fb_cmd + sizeof(union qxl_release_info) + (release->release_offset & ~PAGE_MASK),
|
2017-06-20 18:39:14 +07:00
|
|
|
u64_to_user_ptr(cmd->command), cmd->command_size);
|
2013-07-02 16:44:50 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
{
|
|
|
|
struct qxl_drawable *draw = fb_cmd;
|
2018-10-27 02:22:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
draw->mm_time = qdev->rom->mm_clock;
|
|
|
|
}
|
2013-07-02 16:44:50 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
qxl_bo_kunmap_atomic_page(qdev, cmd_bo, fb_cmd);
|
|
|
|
if (unwritten) {
|
|
|
|
DRM_ERROR("got unwritten %d\n", unwritten);
|
|
|
|
ret = -EFAULT;
|
|
|
|
goto out_free_release;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* fill out reloc info structs */
|
|
|
|
num_relocs = 0;
|
|
|
|
for (i = 0; i < cmd->relocs_num; ++i) {
|
|
|
|
struct drm_qxl_reloc reloc;
|
2017-06-20 18:39:14 +07:00
|
|
|
struct drm_qxl_reloc __user *u = u64_to_user_ptr(cmd->relocs);
|
2013-07-23 11:16:42 +07:00
|
|
|
|
2017-06-20 18:39:14 +07:00
|
|
|
if (copy_from_user(&reloc, u + i, sizeof(reloc))) {
|
2013-07-23 11:16:42 +07:00
|
|
|
ret = -EFAULT;
|
|
|
|
goto out_free_bos;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
}
|
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
/* add the bos to the list of bos to validate -
|
|
|
|
need to validate first then process relocs? */
|
|
|
|
if (reloc.reloc_type != QXL_RELOC_TYPE_BO && reloc.reloc_type != QXL_RELOC_TYPE_SURF) {
|
2015-06-03 18:09:11 +07:00
|
|
|
DRM_DEBUG("unknown reloc type %d\n", reloc.reloc_type);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
ret = -EINVAL;
|
|
|
|
goto out_free_bos;
|
|
|
|
}
|
|
|
|
reloc_info[i].type = reloc.reloc_type;
|
|
|
|
|
|
|
|
if (reloc.dst_handle) {
|
2016-05-09 17:04:54 +07:00
|
|
|
ret = qxlhw_handle_to_bo(file_priv, reloc.dst_handle, release,
|
2015-06-03 18:09:19 +07:00
|
|
|
&reloc_info[i].dst_bo);
|
|
|
|
if (ret)
|
2013-07-23 11:16:42 +07:00
|
|
|
goto out_free_bos;
|
|
|
|
reloc_info[i].dst_offset = reloc.dst_offset;
|
|
|
|
} else {
|
|
|
|
reloc_info[i].dst_bo = cmd_bo;
|
|
|
|
reloc_info[i].dst_offset = reloc.dst_offset + release->release_offset;
|
|
|
|
}
|
|
|
|
num_relocs++;
|
|
|
|
|
|
|
|
/* reserve and validate the reloc dst bo */
|
2015-06-03 18:09:19 +07:00
|
|
|
if (reloc.reloc_type == QXL_RELOC_TYPE_BO || reloc.src_handle) {
|
2016-05-09 17:04:54 +07:00
|
|
|
ret = qxlhw_handle_to_bo(file_priv, reloc.src_handle, release,
|
2015-06-03 18:09:19 +07:00
|
|
|
&reloc_info[i].src_bo);
|
|
|
|
if (ret)
|
2013-07-23 11:16:42 +07:00
|
|
|
goto out_free_bos;
|
|
|
|
reloc_info[i].src_offset = reloc.src_offset;
|
|
|
|
} else {
|
|
|
|
reloc_info[i].src_bo = NULL;
|
|
|
|
reloc_info[i].src_offset = 0;
|
|
|
|
}
|
|
|
|
}
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
/* validate all buffers */
|
|
|
|
ret = qxl_release_reserve_list(release, false);
|
|
|
|
if (ret)
|
|
|
|
goto out_free_bos;
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
for (i = 0; i < cmd->relocs_num; ++i) {
|
|
|
|
if (reloc_info[i].type == QXL_RELOC_TYPE_BO)
|
|
|
|
apply_reloc(qdev, &reloc_info[i]);
|
|
|
|
else if (reloc_info[i].type == QXL_RELOC_TYPE_SURF)
|
|
|
|
apply_surf_reloc(qdev, &reloc_info[i]);
|
|
|
|
}
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2013-07-23 11:16:42 +07:00
|
|
|
ret = qxl_push_command_ring_release(qdev, release, cmd->type, true);
|
|
|
|
if (ret)
|
|
|
|
qxl_release_backoff_reserve_list(release);
|
|
|
|
else
|
|
|
|
qxl_release_fence_buffer_objects(release);
|
|
|
|
|
|
|
|
out_free_bos:
|
|
|
|
out_free_release:
|
|
|
|
if (ret)
|
|
|
|
qxl_release_free(qdev, release);
|
|
|
|
out_free_reloc:
|
|
|
|
kfree(reloc_info);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_execbuffer_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
|
|
|
{
|
|
|
|
struct qxl_device *qdev = dev->dev_private;
|
|
|
|
struct drm_qxl_execbuffer *execbuffer = data;
|
|
|
|
struct drm_qxl_command user_cmd;
|
|
|
|
int cmd_num;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
for (cmd_num = 0; cmd_num < execbuffer->commands_num; ++cmd_num) {
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2017-06-20 18:39:14 +07:00
|
|
|
struct drm_qxl_command __user *commands =
|
|
|
|
u64_to_user_ptr(execbuffer->commands);
|
2013-07-23 11:16:42 +07:00
|
|
|
|
2017-06-20 18:39:14 +07:00
|
|
|
if (copy_from_user(&user_cmd, commands + cmd_num,
|
2013-07-23 11:16:42 +07:00
|
|
|
sizeof(user_cmd)))
|
|
|
|
return -EFAULT;
|
|
|
|
|
|
|
|
ret = qxl_process_single_command(qdev, &user_cmd, file_priv);
|
|
|
|
if (ret)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2013-04-16 10:24:25 +07:00
|
|
|
static int qxl_update_area_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
{
|
|
|
|
struct qxl_device *qdev = dev->dev_private;
|
|
|
|
struct drm_qxl_update_area *update_area = data;
|
|
|
|
struct qxl_rect area = {.left = update_area->left,
|
|
|
|
.top = update_area->top,
|
|
|
|
.right = update_area->right,
|
|
|
|
.bottom = update_area->bottom};
|
|
|
|
int ret;
|
|
|
|
struct drm_gem_object *gobj = NULL;
|
|
|
|
struct qxl_bo *qobj = NULL;
|
2017-04-12 19:24:39 +07:00
|
|
|
struct ttm_operation_ctx ctx = { true, false };
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
|
|
|
if (update_area->left >= update_area->right ||
|
|
|
|
update_area->top >= update_area->bottom)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2016-05-09 17:04:54 +07:00
|
|
|
gobj = drm_gem_object_lookup(file, update_area->handle);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
if (gobj == NULL)
|
|
|
|
return -ENOENT;
|
|
|
|
|
|
|
|
qobj = gem_to_qxl_bo(gobj);
|
|
|
|
|
|
|
|
ret = qxl_bo_reserve(qobj, false);
|
|
|
|
if (ret)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
if (!qobj->pin_count) {
|
2013-07-23 11:06:07 +07:00
|
|
|
qxl_ttm_placement_from_domain(qobj, qobj->type, false);
|
2017-04-12 19:24:39 +07:00
|
|
|
ret = ttm_bo_validate(&qobj->tbo, &qobj->placement, &ctx);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
if (unlikely(ret))
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = qxl_bo_check_id(qdev, qobj);
|
|
|
|
if (ret)
|
|
|
|
goto out2;
|
|
|
|
if (!qobj->surface_id)
|
|
|
|
DRM_ERROR("got update area for surface with no id %d\n", update_area->handle);
|
|
|
|
ret = qxl_io_update_area(qdev, qobj, &area);
|
|
|
|
|
|
|
|
out2:
|
|
|
|
qxl_bo_unreserve(qobj);
|
|
|
|
|
|
|
|
out:
|
2018-03-21 01:29:27 +07:00
|
|
|
drm_gem_object_put_unlocked(gobj);
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_getparam_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
|
|
|
{
|
|
|
|
struct qxl_device *qdev = dev->dev_private;
|
|
|
|
struct drm_qxl_getparam *param = data;
|
|
|
|
|
|
|
|
switch (param->param) {
|
|
|
|
case QXL_PARAM_NUM_SURFACES:
|
|
|
|
param->value = qdev->rom->n_surfaces;
|
|
|
|
break;
|
|
|
|
case QXL_PARAM_MAX_RELOCS:
|
|
|
|
param->value = QXL_MAX_RES;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_clientcap_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file_priv)
|
|
|
|
{
|
|
|
|
struct qxl_device *qdev = dev->dev_private;
|
|
|
|
struct drm_qxl_clientcap *param = data;
|
|
|
|
int byte, idx;
|
|
|
|
|
|
|
|
byte = param->index / 8;
|
|
|
|
idx = param->index % 8;
|
|
|
|
|
2017-01-27 08:05:47 +07:00
|
|
|
if (dev->pdev->revision < 4)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
return -ENOSYS;
|
|
|
|
|
2013-04-16 10:36:00 +07:00
|
|
|
if (byte >= 58)
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
return -ENOSYS;
|
|
|
|
|
|
|
|
if (qdev->rom->client_capabilities[byte] & (1 << idx))
|
|
|
|
return 0;
|
|
|
|
return -ENOSYS;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int qxl_alloc_surf_ioctl(struct drm_device *dev, void *data,
|
|
|
|
struct drm_file *file)
|
|
|
|
{
|
|
|
|
struct qxl_device *qdev = dev->dev_private;
|
|
|
|
struct drm_qxl_alloc_surf *param = data;
|
|
|
|
struct qxl_bo *qobj;
|
|
|
|
int handle;
|
|
|
|
int ret;
|
|
|
|
int size, actual_stride;
|
|
|
|
struct qxl_surface surf;
|
|
|
|
|
|
|
|
/* work out size allocate bo with handle */
|
|
|
|
actual_stride = param->stride < 0 ? -param->stride : param->stride;
|
|
|
|
size = actual_stride * param->height + actual_stride;
|
|
|
|
|
|
|
|
surf.format = param->format;
|
|
|
|
surf.width = param->width;
|
|
|
|
surf.height = param->height;
|
|
|
|
surf.stride = param->stride;
|
|
|
|
surf.data = 0;
|
|
|
|
|
|
|
|
ret = qxl_gem_object_create_with_handle(qdev, file,
|
|
|
|
QXL_GEM_DOMAIN_SURFACE,
|
|
|
|
size,
|
|
|
|
&surf,
|
|
|
|
&qobj, &handle);
|
|
|
|
if (ret) {
|
|
|
|
DRM_ERROR("%s: failed to create gem ret=%d\n",
|
|
|
|
__func__, ret);
|
|
|
|
return -ENOMEM;
|
|
|
|
} else
|
|
|
|
param->handle = handle;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2013-08-03 00:27:49 +07:00
|
|
|
const struct drm_ioctl_desc qxl_ioctls[] = {
|
2015-09-08 18:56:30 +07:00
|
|
|
DRM_IOCTL_DEF_DRV(QXL_ALLOC, qxl_alloc_ioctl, DRM_AUTH),
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
2015-09-08 18:56:30 +07:00
|
|
|
DRM_IOCTL_DEF_DRV(QXL_MAP, qxl_map_ioctl, DRM_AUTH),
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
|
|
|
DRM_IOCTL_DEF_DRV(QXL_EXECBUFFER, qxl_execbuffer_ioctl,
|
2015-09-08 18:56:30 +07:00
|
|
|
DRM_AUTH),
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
DRM_IOCTL_DEF_DRV(QXL_UPDATE_AREA, qxl_update_area_ioctl,
|
2015-09-08 18:56:30 +07:00
|
|
|
DRM_AUTH),
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
DRM_IOCTL_DEF_DRV(QXL_GETPARAM, qxl_getparam_ioctl,
|
2015-09-08 18:56:30 +07:00
|
|
|
DRM_AUTH),
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
DRM_IOCTL_DEF_DRV(QXL_CLIENTCAP, qxl_clientcap_ioctl,
|
2015-09-08 18:56:30 +07:00
|
|
|
DRM_AUTH),
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
|
|
|
|
DRM_IOCTL_DEF_DRV(QXL_ALLOC_SURF, qxl_alloc_surf_ioctl,
|
2015-09-08 18:56:30 +07:00
|
|
|
DRM_AUTH),
|
drm: add new QXL driver. (v1.4)
QXL is a paravirtual graphics device used by the Spice virtual desktop
interface.
The drivers uses GEM and TTM to manage memory, the qxl hw fencing however
is quite different than normal TTM expects, we have to keep track of a number
of non-linear fence ids per bo that we need to have released by the hardware.
The releases are freed from a workqueue that wakes up and processes the
release ring.
releases are suballocated from a BO, there are 3 release categories, drawables,
surfaces and cursor cmds. The hw also has 3 rings for commands, cursor and release handling.
The hardware also have a surface id tracking mechnaism and the driver encapsulates it completely inside the kernel, userspace never sees the actual hw surface
ids.
This requires a newer version of the QXL userspace driver, so shouldn't be
enabled until that has been placed into your distro of choice.
Authors: Dave Airlie, Alon Levy
v1.1: fixup some issues in the ioctl interface with padding
v1.2: add module device table
v1.3: fix nomodeset, fbcon leak, dumb bo create, release ring irq,
don't try flush release ring (broken hw), fix -modesetting.
v1.4: fbcon cpu usage reduction + suitable accel flags.
Signed-off-by: Alon Levy <alevy@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-02-25 11:47:55 +07:00
|
|
|
};
|
|
|
|
|
2014-06-09 20:39:49 +07:00
|
|
|
int qxl_max_ioctls = ARRAY_SIZE(qxl_ioctls);
|