linux_dsm_epyc7002/drivers/gpu/drm/drm_stub.c

487 lines
11 KiB
C
Raw Normal View History

/**
* \file drm_stub.h
* Stub support
*
* \author Rickard E. (Rik) Faith <faith@valinux.com>
*/
/*
* Created: Fri Jan 19 10:48:35 2001 by faith@acm.org
*
* Copyright 2001 VA Linux Systems, Inc., Sunnyvale, California.
* All Rights Reserved.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the "Software"),
* to deal in the Software without restriction, including without limitation
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
* and/or sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice (including the next
* paragraph) shall be included in all copies or substantial portions of the
* Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* PRECISION INSIGHT AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
* OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
* ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
* DEALINGS IN THE SOFTWARE.
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <drm/drmP.h>
#include <drm/drm_core.h>
unsigned int drm_debug = 0; /* 1 to enable debug output */
EXPORT_SYMBOL(drm_debug);
drm: implement experimental render nodes Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-25 23:29:00 +07:00
unsigned int drm_rnodes = 0; /* 1 to enable experimental render nodes API */
EXPORT_SYMBOL(drm_rnodes);
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 09:20:23 +07:00
unsigned int drm_vblank_offdelay = 5000; /* Default to 5000 msecs. */
EXPORT_SYMBOL(drm_vblank_offdelay);
unsigned int drm_timestamp_precision = 20; /* Default to 20 usecs. */
EXPORT_SYMBOL(drm_timestamp_precision);
/*
* Default to use monotonic timestamps for wait-for-vblank and page-flip
* complete events.
*/
unsigned int drm_timestamp_monotonic = 1;
MODULE_AUTHOR(CORE_AUTHOR);
MODULE_DESCRIPTION(CORE_DESC);
MODULE_LICENSE("GPL and additional rights");
MODULE_PARM_DESC(debug, "Enable debug output");
drm: implement experimental render nodes Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-25 23:29:00 +07:00
MODULE_PARM_DESC(rnodes, "Enable experimental render nodes API");
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 09:20:23 +07:00
MODULE_PARM_DESC(vblankoffdelay, "Delay until vblank irq auto-disable [msecs]");
MODULE_PARM_DESC(timestamp_precision_usec, "Max. error on timestamps [usecs]");
MODULE_PARM_DESC(timestamp_monotonic, "Use monotonic timestamps");
module_param_named(debug, drm_debug, int, 0600);
drm: implement experimental render nodes Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-25 23:29:00 +07:00
module_param_named(rnodes, drm_rnodes, int, 0600);
drm/vblank: Add support for precise vblank timestamping. The DRI2 swap & sync implementation needs precise vblank counts and precise timestamps corresponding to those vblank counts. For conformance to the OpenML OML_sync_control extension specification the DRM timestamp associated with a vblank count should correspond to the start of video scanout of the first scanline of the video frame following the vblank interval for that vblank count. Therefore we need to carry around precise timestamps for vblanks. Currently the DRM and KMS drivers generate timestamps ad-hoc via do_gettimeofday() in some places. The resulting timestamps are sometimes not very precise due to interrupt handling delays, they don't conform to OML_sync_control and some are wrong, as they aren't taken synchronized to the vblank. This patch implements support inside the drm core for precise and robust timestamping. It consists of the following interrelated pieces. 1. Vblank timestamp caching: A per-crtc ringbuffer stores the most recent vblank timestamps corresponding to vblank counts. The ringbuffer can be read out lock-free via the accessor function: struct timeval timestamp; vblankcount = drm_vblank_count_and_time(dev, crtcid, &timestamp). The function returns the current vblank count and the corresponding timestamp for start of video scanout following the vblank interval. It can be used anywhere between enclosing drm_vblank_get(dev, crtcid) and drm_vblank_put(dev,crtcid) statements. It is used inside the drmWaitVblank ioctl and in the vblank event queueing and handling. It should be used by kms drivers for timestamping of bufferswap completion. The timestamp ringbuffer is reinitialized each time vblank irq's get reenabled in drm_vblank_get()/ drm_update_vblank_count(). It is invalidated when vblank irq's get disabled. The ringbuffer is updated inside drm_handle_vblank() at each vblank irq. 2. Calculation of precise vblank timestamps: drm_get_last_vbltimestamp() is used to compute the timestamp for the end of the most recent vblank (if inside active scanout), or the expected end of the current vblank interval (if called inside a vblank interval). The function calls into a new optional kms driver entry point dev->driver->get_vblank_timestamp() which is supposed to provide the precise timestamp. If a kms driver doesn't implement the entry point or if the call fails, a simple do_gettimeofday() timestamp is returned as crude approximation of the true vblank time. A new drm module parameter drm.timestamp_precision_usec allows to disable high precision timestamps (if set to zero) or to specify the maximum acceptable error in the timestamps in microseconds. Kms drivers could implement their get_vblank_timestamp() function in a gpu specific way, as long as returned timestamps conform to OML_sync_control, e.g., by use of gpu specific hardware timestamps. Optionally, kms drivers can simply wrap and use the new utility function drm_calc_vbltimestamp_from_scanoutpos(). This function calls a new optional kms driver function dev->driver->get_scanout_position() which returns the current horizontal and vertical video scanout position of the crtc. The scanout position together with the drm_display_timing of the current video mode is used to calculate elapsed time relative to start of active scanout for the current video frame. This elapsed time is subtracted from the current do_gettimeofday() time to get the timestamp corresponding to start of video scanout. Currently non-interlaced, non-doublescan video modes, with or without panel scaling are handled correctly. Interlaced/ doublescan modes are tbd in a future patch. 3. Filtering of redundant vblank irq's and removal of some race-conditions in the vblank irq enable/disable path: Some gpu's (e.g., Radeon R500/R600) send spurious vblank irq's outside the vblank if vblank irq's get reenabled. These get detected by use of the vblank timestamps and filtered out to avoid miscounting of vblanks. Some race-conditions between the vblank irq enable/disable functions, the vblank irq handler and the gpu itself (updating its hardware vblank counter in the "wrong" moment) are fixed inside vblank_disable_and_save() and drm_update_vblank_count() by use of the vblank timestamps and a new spinlock dev->vblank_time_lock. The time until vblank irq disable is now configurable via a new drm module parameter drm.vblankoffdelay to allow experimentation with timeouts that are much shorter than the current 5 seconds and should allow longer vblank off periods for better power savings. Followup patches will use these new functions to implement precise timestamping for the intel and radeon kms drivers. Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-10-23 09:20:23 +07:00
module_param_named(vblankoffdelay, drm_vblank_offdelay, int, 0600);
module_param_named(timestamp_precision_usec, drm_timestamp_precision, int, 0600);
module_param_named(timestamp_monotonic, drm_timestamp_monotonic, int, 0600);
struct idr drm_minors_idr;
struct class *drm_class;
struct dentry *drm_debugfs_root;
int drm_err(const char *func, const char *format, ...)
{
struct va_format vaf;
va_list args;
int r;
va_start(args, format);
vaf.fmt = format;
vaf.va = &args;
r = printk(KERN_ERR "[" DRM_NAME ":%s] *ERROR* %pV", func, &vaf);
va_end(args);
return r;
}
EXPORT_SYMBOL(drm_err);
2009-06-02 13:09:47 +07:00
void drm_ut_debug_printk(unsigned int request_level,
const char *prefix,
const char *function_name,
const char *format, ...)
{
va_list args;
2009-06-02 13:09:47 +07:00
if (drm_debug & request_level) {
if (function_name)
printk(KERN_DEBUG "[%s:%s], ", prefix, function_name);
va_start(args, format);
vprintk(format, args);
va_end(args);
}
}
EXPORT_SYMBOL(drm_ut_debug_printk);
static int drm_minor_get_id(struct drm_device *dev, int type)
{
int ret;
int base = 0, limit = 63;
if (type == DRM_MINOR_CONTROL) {
base += 64;
limit = base + 63;
} else if (type == DRM_MINOR_RENDER) {
base += 128;
limit = base + 63;
}
mutex_lock(&dev->struct_mutex);
ret = idr_alloc(&drm_minors_idr, NULL, base, limit, GFP_KERNEL);
mutex_unlock(&dev->struct_mutex);
return ret == -ENOSPC ? -EINVAL : ret;
}
struct drm_master *drm_master_create(struct drm_minor *minor)
{
struct drm_master *master;
master = kzalloc(sizeof(*master), GFP_KERNEL);
if (!master)
return NULL;
kref_init(&master->refcount);
spin_lock_init(&master->lock.spinlock);
init_waitqueue_head(&master->lock.lock_queue);
drm_ht_create(&master->magiclist, DRM_MAGIC_HASH_ORDER);
INIT_LIST_HEAD(&master->magicfree);
master->minor = minor;
list_add_tail(&master->head, &minor->master_list);
return master;
}
struct drm_master *drm_master_get(struct drm_master *master)
{
kref_get(&master->refcount);
return master;
}
EXPORT_SYMBOL(drm_master_get);
static void drm_master_destroy(struct kref *kref)
{
struct drm_master *master = container_of(kref, struct drm_master, refcount);
struct drm_magic_entry *pt, *next;
struct drm_device *dev = master->minor->dev;
struct drm_map_list *r_list, *list_temp;
list_del(&master->head);
if (dev->driver->master_destroy)
dev->driver->master_destroy(dev, master);
list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) {
if (r_list->master == master) {
drm_rmmap_locked(dev, r_list->map);
r_list = NULL;
}
}
if (master->unique) {
kfree(master->unique);
master->unique = NULL;
master->unique_len = 0;
}
kfree(dev->devname);
dev->devname = NULL;
list_for_each_entry_safe(pt, next, &master->magicfree, head) {
list_del(&pt->head);
drm_ht_remove_item(&master->magiclist, &pt->hash_item);
kfree(pt);
}
drm_ht_remove(&master->magiclist);
kfree(master);
}
void drm_master_put(struct drm_master **master)
{
kref_put(&(*master)->refcount, drm_master_destroy);
*master = NULL;
}
EXPORT_SYMBOL(drm_master_put);
int drm_setmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
int ret = 0;
if (file_priv->is_master)
return 0;
if (file_priv->minor->master && file_priv->minor->master != file_priv->master)
return -EINVAL;
if (!file_priv->master)
return -EINVAL;
drm: fix returning -EINVAL on setmaster if another master is active We link every DRM "file_priv" to a "drm_master" structure. Currently, the drmSetMaster() call returns 0 when there is _any_ active master associated with the "drm_master" structure of the calling "file_priv". This means, that after drmSetMaster() we are not guaranteed to be DRM-Master and might not be able to perform mode-setting. A way to reproduce this is by starting weston with the DRM backend from within an X-console (eg., xterm). Because the xserver's "drm_master" is currently active, weston is assigned to the same master but is inactive because its VT is inactive and the xserver is still active. But when "fake-activating" weston, it calls drmSetMaster(). With current behavior this returns "0/success" and weston thinks that it is DRM-Master, even though it is not (as the xserver is still DRM-Master). Expected behavior would be drmSetMaster() to return -EINVAL, because the xserver is still DRM-Master. This patch changes exactly that. The only way this bogus behavior would be useful is for clients to check whether their associated "drm_master" is currently the active DRM-Master. But this logic fails if no DRM-Master is currently active at all. Because then the client itself would become DRM-Master (if it is root) and this makes this whole thing useles. Also note that the second "if-condition": file_priv->minor->master != file_priv->master is always true and can be skipped. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-15 20:04:37 +07:00
if (file_priv->minor->master)
return -EINVAL;
mutex_lock(&dev->struct_mutex);
file_priv->minor->master = drm_master_get(file_priv->master);
file_priv->is_master = 1;
if (dev->driver->master_set) {
ret = dev->driver->master_set(dev, file_priv, false);
if (unlikely(ret != 0)) {
file_priv->is_master = 0;
drm_master_put(&file_priv->minor->master);
}
}
drm: fix returning -EINVAL on setmaster if another master is active We link every DRM "file_priv" to a "drm_master" structure. Currently, the drmSetMaster() call returns 0 when there is _any_ active master associated with the "drm_master" structure of the calling "file_priv". This means, that after drmSetMaster() we are not guaranteed to be DRM-Master and might not be able to perform mode-setting. A way to reproduce this is by starting weston with the DRM backend from within an X-console (eg., xterm). Because the xserver's "drm_master" is currently active, weston is assigned to the same master but is inactive because its VT is inactive and the xserver is still active. But when "fake-activating" weston, it calls drmSetMaster(). With current behavior this returns "0/success" and weston thinks that it is DRM-Master, even though it is not (as the xserver is still DRM-Master). Expected behavior would be drmSetMaster() to return -EINVAL, because the xserver is still DRM-Master. This patch changes exactly that. The only way this bogus behavior would be useful is for clients to check whether their associated "drm_master" is currently the active DRM-Master. But this logic fails if no DRM-Master is currently active at all. Because then the client itself would become DRM-Master (if it is root) and this makes this whole thing useles. Also note that the second "if-condition": file_priv->minor->master != file_priv->master is always true and can be skipped. Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-15 20:04:37 +07:00
mutex_unlock(&dev->struct_mutex);
return ret;
}
int drm_dropmaster_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
if (!file_priv->is_master)
return -EINVAL;
if (!file_priv->minor->master)
return -EINVAL;
mutex_lock(&dev->struct_mutex);
if (dev->driver->master_drop)
dev->driver->master_drop(dev, file_priv, false);
drm_master_put(&file_priv->minor->master);
file_priv->is_master = 0;
mutex_unlock(&dev->struct_mutex);
return 0;
}
int drm_fill_in_dev(struct drm_device *dev,
const struct pci_device_id *ent,
struct drm_driver *driver)
{
int retcode;
INIT_LIST_HEAD(&dev->filelist);
INIT_LIST_HEAD(&dev->ctxlist);
INIT_LIST_HEAD(&dev->vmalist);
INIT_LIST_HEAD(&dev->maplist);
INIT_LIST_HEAD(&dev->vblank_event_list);
spin_lock_init(&dev->count_lock);
spin_lock_init(&dev->event_lock);
mutex_init(&dev->struct_mutex);
mutex_init(&dev->ctxlist_mutex);
if (drm_ht_create(&dev->map_hash, 12)) {
return -ENOMEM;
}
/* the DRM has 6 basic counters */
dev->counters = 6;
dev->types[0] = _DRM_STAT_LOCK;
dev->types[1] = _DRM_STAT_OPENS;
dev->types[2] = _DRM_STAT_CLOSES;
dev->types[3] = _DRM_STAT_IOCTLS;
dev->types[4] = _DRM_STAT_LOCKS;
dev->types[5] = _DRM_STAT_UNLOCKS;
dev->driver = driver;
if (dev->driver->bus->agp_init) {
retcode = dev->driver->bus->agp_init(dev);
if (retcode)
goto error_out_unreg;
}
drm_legacy_ctxbitmap_init(dev);
if (driver->driver_features & DRIVER_GEM) {
retcode = drm_gem_init(dev);
if (retcode) {
DRM_ERROR("Cannot initialize graphics execution "
"manager (GEM)\n");
goto error_out_unreg;
}
}
return 0;
error_out_unreg:
drm_lastclose(dev);
return retcode;
}
EXPORT_SYMBOL(drm_fill_in_dev);
/**
* Get a secondary minor number.
*
* \param dev device data structure
* \param sec-minor structure to hold the assigned minor
* \return negative number on failure.
*
drm: remove procfs code, take 2 So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08 20:41:34 +07:00
* Search an empty entry and initialize it to the given parameters. This
* routines assigns minor numbers to secondary heads of multi-headed cards
*/
int drm_get_minor(struct drm_device *dev, struct drm_minor **minor, int type)
{
struct drm_minor *new_minor;
int ret;
int minor_id;
DRM_DEBUG("\n");
minor_id = drm_minor_get_id(dev, type);
if (minor_id < 0)
return minor_id;
new_minor = kzalloc(sizeof(struct drm_minor), GFP_KERNEL);
if (!new_minor) {
ret = -ENOMEM;
goto err_idr;
}
new_minor->type = type;
new_minor->device = MKDEV(DRM_MAJOR, minor_id);
new_minor->dev = dev;
new_minor->index = minor_id;
INIT_LIST_HEAD(&new_minor->master_list);
idr_replace(&drm_minors_idr, new_minor, minor_id);
#if defined(CONFIG_DEBUG_FS)
ret = drm_debugfs_init(new_minor, minor_id, drm_debugfs_root);
if (ret) {
DRM_ERROR("DRM: Failed to initialize /sys/kernel/debug/dri.\n");
drm: remove procfs code, take 2 So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08 20:41:34 +07:00
goto err_mem;
}
#endif
ret = drm_sysfs_device_add(new_minor);
if (ret) {
printk(KERN_ERR
"DRM: Error sysfs_device_add.\n");
drm: remove procfs code, take 2 So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08 20:41:34 +07:00
goto err_debugfs;
}
*minor = new_minor;
DRM_DEBUG("new minor assigned %d\n", minor_id);
return 0;
drm: remove procfs code, take 2 So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08 20:41:34 +07:00
err_debugfs:
#if defined(CONFIG_DEBUG_FS)
drm_debugfs_cleanup(new_minor);
err_mem:
drm: remove procfs code, take 2 So almost two years ago I've tried to nuke the procfs code already once before: http://lists.freedesktop.org/archives/dri-devel/2011-October/015707.html The conclusion was that userspace drivers (specifically libdrm device node detection) stopped relying on procfs in 2001. But after some digging it turned out that the drmstat tool in libdrm is still using those files (but only when certain options are set). So we've decided to keep profcs. But I when I've started to dig around again what exactly this tool does I've noticed that it tries to read the "mem", "vm", and "vma" files from procfs. Now as far my git history digging shows "mem" never did anything useful (at least in the version that first showed up in upstream history in 2004) and the file was remove in commit 955b12def42e83287c1bdb1411d99451753c1391 Author: Ben Gamari <bgamari@gmail.com> Date: Tue Feb 17 20:08:49 2009 -0500 drm: Convert proc files to seq_file and introduce debugfs Which means that for over 4 years drmstat has been broken, and no one cared. In my opinion that's proof enough that no one is actually using drmstat, and so that we can savely nuke the procfs support from drm. While at it fix up the error case cleanup for debugfs in drm_get_minor. v2: Fix dates, libdrm stopped relying on procfs for drm node detection in 2001. v3: fixup compilation warning for !CONFIG_DEBUG_FS, reported by Fengguang Wu. Cc: kbuild test robot <fengguang.wu@intel.com> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-08 20:41:34 +07:00
#endif
kfree(new_minor);
err_idr:
idr_remove(&drm_minors_idr, minor_id);
*minor = NULL;
return ret;
}
EXPORT_SYMBOL(drm_get_minor);
/**
* Put a secondary minor number.
*
* \param sec_minor - structure to be released
* \return always zero
*/
int drm_put_minor(struct drm_minor **minor_p)
{
struct drm_minor *minor = *minor_p;
DRM_DEBUG("release secondary minor %d\n", minor->index);
#if defined(CONFIG_DEBUG_FS)
drm_debugfs_cleanup(minor);
#endif
drm_sysfs_device_remove(minor);
idr_remove(&drm_minors_idr, minor->index);
kfree(minor);
*minor_p = NULL;
return 0;
}
EXPORT_SYMBOL(drm_put_minor);
static void drm_unplug_minor(struct drm_minor *minor)
{
drm_sysfs_device_remove(minor);
}
/**
* Called via drm_exit() at module unload time or when pci device is
* unplugged.
*
* Cleans up all DRM device, calling drm_lastclose().
*
*/
void drm_put_dev(struct drm_device *dev)
{
struct drm_driver *driver;
struct drm_map_list *r_list, *list_temp;
DRM_DEBUG("\n");
if (!dev) {
DRM_ERROR("cleanup called no dev\n");
return;
}
driver = dev->driver;
drm_lastclose(dev);
if (dev->driver->unload)
dev->driver->unload(dev);
if (dev->driver->bus->agp_destroy)
dev->driver->bus->agp_destroy(dev);
drm_vblank_cleanup(dev);
list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
drm_rmmap(dev, r_list->map);
drm_ht_remove(&dev->map_hash);
drm_legacy_ctxbitmap_cleanup(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_put_minor(&dev->control);
drm: implement experimental render nodes Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-25 23:29:00 +07:00
if (dev->render)
drm_put_minor(&dev->render);
if (driver->driver_features & DRIVER_GEM)
drm_gem_destroy(dev);
drm_put_minor(&dev->primary);
list_del(&dev->driver_item);
kfree(dev->devname);
kfree(dev);
}
EXPORT_SYMBOL(drm_put_dev);
void drm_unplug_dev(struct drm_device *dev)
{
/* for a USB device */
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_unplug_minor(dev->control);
drm: implement experimental render nodes Render nodes provide an API for userspace to use non-privileged GPU commands without any running DRM-Master. It is useful for offscreen rendering, GPGPU clients, and normal render clients which do not perform modesetting. Compared to legacy clients, render clients no longer need any authentication to perform client ioctls. Instead, user-space controls render/client access to GPUs via filesystem access-modes on the render-node. Once a render-node was opened, a client has full access to the client/render operations on the GPU. However, no modesetting or ioctls that affect global state are allowed on render nodes. To prevent privilege-escalation, drivers must explicitly state that they support render nodes. They must mark their render-only ioctls as DRM_RENDER_ALLOW so render clients can use them. Furthermore, they must support clients without any attached master. If filesystem access-modes are not enough for fine-grained access control to render nodes (very unlikely, considering the versaitlity of FS-ACLs), you may still fall-back to fd-passing from server to client (which allows arbitrary access-control). However, note that revoking access is currently impossible and unlikely to get implemented. Note: Render clients no longer have any associated DRM-Master as they are supposed to be independent of any server state. DRM core highly depends on file_priv->master to be non-NULL for modesetting/ctx/etc. commands. Therefore, drivers must be very careful to not require DRM-Master if they support DRIVER_RENDER. So far render-nodes are protected by "drm_rnodes". As long as this module-parameter is not set to 1, a driver will not create render nodes. This allows us to experiment with the API a bit before we stabilize it. v2: drop insecure GEM_FLINK to force use of dmabuf Signed-off-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2013-08-25 23:29:00 +07:00
if (dev->render)
drm_unplug_minor(dev->render);
drm_unplug_minor(dev->primary);
mutex_lock(&drm_global_mutex);
drm_device_set_unplugged(dev);
if (dev->open_count == 0) {
drm_put_dev(dev);
}
mutex_unlock(&drm_global_mutex);
}
EXPORT_SYMBOL(drm_unplug_dev);