linux_dsm_epyc7002/arch/blackfin/mach-common/smp.c

434 lines
9.7 KiB
C
Raw Normal View History

/*
* IPI management based on arch/arm/kernel/smp.c (Copyright 2002 ARM Limited)
*
* Copyright 2007-2009 Analog Devices Inc.
* Philippe Gerum <rpm@xenomai.org>
*
* Licensed under the GPL-2.
*/
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/cache.h>
#include <linux/clockchips.h>
#include <linux/profile.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/cpu.h>
#include <linux/smp.h>
#include <linux/cpumask.h>
#include <linux/seq_file.h>
#include <linux/irq.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
#include <linux/atomic.h>
#include <asm/cacheflush.h>
#include <asm/irq_handler.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/ptrace.h>
#include <asm/cpu.h>
#include <asm/time.h>
#include <linux/err.h>
/*
* Anomaly notes:
* 05000120 - we always define corelock as 32-bit integer in L2
*/
struct corelock_slot corelock __attribute__ ((__section__(".l2.bss")));
#ifdef CONFIG_ICACHE_FLUSH_L1
unsigned long blackfin_iflush_l1_entry[NR_CPUS];
#endif
blackfin: delete __cpuinit usage from all blackfin files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 03:56:21 +07:00
struct blackfin_initial_pda initial_pda_coreb;
enum ipi_message_type {
BFIN_IPI_NONE,
BFIN_IPI_TIMER,
BFIN_IPI_RESCHEDULE,
BFIN_IPI_CALL_FUNC,
BFIN_IPI_CPU_STOP,
};
struct blackfin_flush_data {
unsigned long start;
unsigned long end;
};
void *secondary_stack;
static struct blackfin_flush_data smp_flush_data;
static DEFINE_SPINLOCK(stop_lock);
/* A magic number - stress test shows this is safe for common cases */
#define BFIN_IPI_MSGQ_LEN 5
/* Simple FIFO buffer, overflow leads to panic */
struct ipi_data {
atomic_t count;
atomic_t bits;
};
static DEFINE_PER_CPU(struct ipi_data, bfin_ipi);
static void ipi_cpu_stop(unsigned int cpu)
{
spin_lock(&stop_lock);
printk(KERN_CRIT "CPU%u: stopping\n", cpu);
dump_stack();
spin_unlock(&stop_lock);
set_cpu_online(cpu, false);
local_irq_disable();
while (1)
SSYNC();
}
static void ipi_flush_icache(void *info)
{
struct blackfin_flush_data *fdata = info;
/* Invalidate the memory holding the bounds of the flushed region. */
blackfin_dcache_invalidate_range((unsigned long)fdata,
(unsigned long)fdata + sizeof(*fdata));
/* Make sure all write buffers in the data side of the core
* are flushed before trying to invalidate the icache. This
* needs to be after the data flush and before the icache
* flush so that the SSYNC does the right thing in preventing
* the instruction prefetcher from hitting things in cached
* memory at the wrong time -- it runs much further ahead than
* the pipeline.
*/
SSYNC();
/* ipi_flaush_icache is invoked by generic flush_icache_range,
* so call blackfin arch icache flush directly here.
*/
blackfin_icache_flush_range(fdata->start, fdata->end);
}
/* Use IRQ_SUPPLE_0 to request reschedule.
* When returning from interrupt to user space,
* there is chance to reschedule */
static irqreturn_t ipi_handler_int0(int irq, void *dev_instance)
{
unsigned int cpu = smp_processor_id();
platform_clear_ipi(cpu, IRQ_SUPPLE_0);
return IRQ_HANDLED;
}
DECLARE_PER_CPU(struct clock_event_device, coretmr_events);
void ipi_timer(void)
{
int cpu = smp_processor_id();
struct clock_event_device *evt = &per_cpu(coretmr_events, cpu);
evt->event_handler(evt);
}
static irqreturn_t ipi_handler_int1(int irq, void *dev_instance)
{
struct ipi_data *bfin_ipi_data;
unsigned int cpu = smp_processor_id();
unsigned long pending;
unsigned long msg;
platform_clear_ipi(cpu, IRQ_SUPPLE_1);
smp_rmb();
bfin_ipi_data = &__get_cpu_var(bfin_ipi);
while ((pending = atomic_xchg(&bfin_ipi_data->bits, 0)) != 0) {
msg = 0;
do {
msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1);
switch (msg) {
case BFIN_IPI_TIMER:
ipi_timer();
break;
case BFIN_IPI_RESCHEDULE:
scheduler_ipi();
break;
case BFIN_IPI_CALL_FUNC:
generic_smp_call_function_interrupt();
break;
case BFIN_IPI_CPU_STOP:
ipi_cpu_stop(cpu);
break;
default:
goto out;
}
atomic_dec(&bfin_ipi_data->count);
} while (msg < BITS_PER_LONG);
}
out:
return IRQ_HANDLED;
}
static void bfin_ipi_init(void)
{
unsigned int cpu;
struct ipi_data *bfin_ipi_data;
for_each_possible_cpu(cpu) {
bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
atomic_set(&bfin_ipi_data->bits, 0);
atomic_set(&bfin_ipi_data->count, 0);
}
}
void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg)
{
unsigned int cpu;
struct ipi_data *bfin_ipi_data;
unsigned long flags;
local_irq_save(flags);
for_each_cpu(cpu, cpumask) {
bfin_ipi_data = &per_cpu(bfin_ipi, cpu);
atomic_set_mask((1 << msg), &bfin_ipi_data->bits);
atomic_inc(&bfin_ipi_data->count);
}
local_irq_restore(flags);
smp_wmb();
for_each_cpu(cpu, cpumask)
platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1);
}
void arch_send_call_function_single_ipi(int cpu)
{
send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC);
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_ipi(mask, BFIN_IPI_CALL_FUNC);
}
void smp_send_reschedule(int cpu)
{
send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE);
return;
}
void smp_send_msg(const struct cpumask *mask, unsigned long type)
{
send_ipi(mask, type);
}
void smp_timer_broadcast(const struct cpumask *mask)
{
smp_send_msg(mask, BFIN_IPI_TIMER);
}
void smp_send_stop(void)
{
cpumask_t callmap;
preempt_disable();
cpumask_copy(&callmap, cpu_online_mask);
cpumask_clear_cpu(smp_processor_id(), &callmap);
if (!cpumask_empty(&callmap))
send_ipi(&callmap, BFIN_IPI_CPU_STOP);
preempt_enable();
return;
}
blackfin: delete __cpuinit usage from all blackfin files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 03:56:21 +07:00
int __cpu_up(unsigned int cpu, struct task_struct *idle)
{
int ret;
secondary_stack = task_stack_page(idle) + THREAD_SIZE;
ret = platform_boot_secondary(cpu, idle);
secondary_stack = NULL;
return ret;
}
blackfin: delete __cpuinit usage from all blackfin files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 03:56:21 +07:00
static void setup_secondary(unsigned int cpu)
{
unsigned long ilat;
bfin_write_IMASK(0);
CSYNC();
ilat = bfin_read_ILAT();
CSYNC();
bfin_write_ILAT(ilat);
CSYNC();
/* Enable interrupt levels IVG7-15. IARs have been already
* programmed by the boot CPU. */
bfin_irq_flags |= IMASK_IVG15 |
IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 |
IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW;
}
blackfin: delete __cpuinit usage from all blackfin files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 03:56:21 +07:00
void secondary_start_kernel(void)
{
unsigned int cpu = smp_processor_id();
struct mm_struct *mm = &init_mm;
if (_bfin_swrst & SWRST_DBL_FAULT_B) {
printk(KERN_EMERG "CoreB Recovering from DOUBLE FAULT event\n");
#ifdef CONFIG_DEBUG_DOUBLEFAULT
printk(KERN_EMERG " While handling exception (EXCAUSE = %#x) at %pF\n",
initial_pda_coreb.seqstat_doublefault & SEQSTAT_EXCAUSE,
initial_pda_coreb.retx_doublefault);
printk(KERN_NOTICE " DCPLB_FAULT_ADDR: %pF\n",
initial_pda_coreb.dcplb_doublefault_addr);
printk(KERN_NOTICE " ICPLB_FAULT_ADDR: %pF\n",
initial_pda_coreb.icplb_doublefault_addr);
#endif
printk(KERN_NOTICE " The instruction at %pF caused a double exception\n",
initial_pda_coreb.retx);
}
/*
* We want the D-cache to be enabled early, in case the atomic
* support code emulates cache coherence (see
* __ARCH_SYNC_CORE_DCACHE).
*/
init_exception_vectors();
local_irq_disable();
/* Attach the new idle task to the global mm. */
atomic_inc(&mm->mm_users);
atomic_inc(&mm->mm_count);
current->active_mm = mm;
preempt_disable();
setup_secondary(cpu);
platform_secondary_init(cpu);
/* setup local core timer */
bfin_local_timer_setup();
local_irq_enable();
bfin_setup_caches(cpu);
notify_cpu_starting(cpu);
/*
* Calibrate loops per jiffy value.
* IRQs need to be enabled here - D-cache can be invalidated
* in timer irq handler, so core B can read correct jiffies.
*/
calibrate_delay();
/* We are done with local CPU inits, unblock the boot CPU. */
set_cpu_online(cpu, true);
cpu_startup_entry(CPUHP_ONLINE);
}
void __init smp_prepare_boot_cpu(void)
{
}
void __init smp_prepare_cpus(unsigned int max_cpus)
{
platform_prepare_cpus(max_cpus);
bfin_ipi_init();
platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0);
platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1);
}
void __init smp_cpus_done(unsigned int max_cpus)
{
unsigned long bogosum = 0;
unsigned int cpu;
for_each_online_cpu(cpu)
bogosum += loops_per_jiffy;
printk(KERN_INFO "SMP: Total of %d processors activated "
"(%lu.%02lu BogoMIPS).\n",
num_online_cpus(),
bogosum / (500000/HZ),
(bogosum / (5000/HZ)) % 100);
}
void smp_icache_flush_range_others(unsigned long start, unsigned long end)
{
smp_flush_data.start = start;
smp_flush_data.end = end;
preempt_disable();
if (smp_call_function(&ipi_flush_icache, &smp_flush_data, 1))
printk(KERN_WARNING "SMP: failed to run I-cache flush request on other CPUs\n");
preempt_enable();
}
EXPORT_SYMBOL_GPL(smp_icache_flush_range_others);
#ifdef __ARCH_SYNC_CORE_ICACHE
unsigned long icache_invld_count[NR_CPUS];
void resync_core_icache(void)
{
unsigned int cpu = get_cpu();
blackfin_invalidate_entire_icache();
icache_invld_count[cpu]++;
put_cpu();
}
EXPORT_SYMBOL(resync_core_icache);
#endif
#ifdef __ARCH_SYNC_CORE_DCACHE
unsigned long dcache_invld_count[NR_CPUS];
unsigned long barrier_mask __attribute__ ((__section__(".l2.bss")));
void resync_core_dcache(void)
{
unsigned int cpu = get_cpu();
blackfin_invalidate_entire_dcache();
dcache_invld_count[cpu]++;
put_cpu();
}
EXPORT_SYMBOL(resync_core_dcache);
#endif
#ifdef CONFIG_HOTPLUG_CPU
blackfin: delete __cpuinit usage from all blackfin files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 03:56:21 +07:00
int __cpu_disable(void)
{
unsigned int cpu = smp_processor_id();
if (cpu == 0)
return -EPERM;
set_cpu_online(cpu, false);
return 0;
}
static DECLARE_COMPLETION(cpu_killed);
blackfin: delete __cpuinit usage from all blackfin files The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/blackfin uses of the __cpuinit macros from all C files. Currently blackfin does not have any __CPUINIT used in assembly files. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Mike Frysinger <vapier@gentoo.org> Cc: Bob Liu <lliubbo@gmail.com> Cc: Sonic Zhang <sonic.zhang@analog.com> Cc: uclinux-dist-devel@blackfin.uclinux.org Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-19 03:56:21 +07:00
int __cpu_die(unsigned int cpu)
{
return wait_for_completion_timeout(&cpu_killed, 5000);
}
void cpu_die(void)
{
complete(&cpu_killed);
atomic_dec(&init_mm.mm_users);
atomic_dec(&init_mm.mm_count);
local_irq_disable();
platform_cpu_die();
}
#endif