linux_dsm_epyc7002/drivers/cpufreq/scpi-cpufreq.c

240 lines
5.5 KiB
C
Raw Normal View History

/*
* System Control and Power Interface (SCPI) based CPUFreq Interface driver
*
* Copyright (C) 2015 ARM Ltd.
* Sudeep Holla <sudeep.holla@arm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/pm_opp.h>
#include <linux/scpi_protocol.h>
#include <linux/slab.h>
#include <linux/types.h>
struct scpi_data {
struct clk *clk;
struct device *cpu_dev;
};
static struct scpi_ops *scpi_ops;
static unsigned int scpi_cpufreq_get_rate(unsigned int cpu)
{
struct cpufreq_policy *policy = cpufreq_cpu_get_raw(cpu);
struct scpi_data *priv = policy->driver_data;
unsigned long rate = clk_get_rate(priv->clk);
return rate / 1000;
}
static int
scpi_cpufreq_set_target(struct cpufreq_policy *policy, unsigned int index)
{
cpufreq: move invariance setter calls in cpufreq core To properly scale its per-entity load-tracking signals, the task scheduler needs to be given a frequency scale factor, i.e. some image of the current frequency the CPU is running at. Currently, this scale can be computed either by using counters (APERF/MPERF on x86, AMU on arm64), or by piggy-backing on the frequency selection done by cpufreq. For the latter, drivers have to explicitly set the scale factor themselves, despite it being purely boiler-plate code: the required information depends entirely on the kind of frequency switch callback implemented by the driver, i.e. either of: target_index(), target(), fast_switch() and setpolicy(). The fitness of those callbacks with regard to driving the Frequency Invariance Engine (FIE) is studied below: target_index() ============== Documentation states that the chosen frequency "must be determined by freq_table[index].frequency". It isn't clear if it *has* to be that frequency, or if it can use that frequency value to do some computation that ultimately leads to a different frequency selection. All drivers go for the former, while the vexpress-spc-cpufreq has an atypical implementation which is handled separately. Therefore, the hook works on the assumption the core can use freq_table[index].frequency. target() ======= This has been flagged as deprecated since: commit 9c0ebcf78fde ("cpufreq: Implement light weight ->target_index() routine") It also doesn't have that many users: gx-suspmod.c:439: .target = cpufreq_gx_target, s3c24xx-cpufreq.c:428: .target = s3c_cpufreq_target, intel_pstate.c:2528: .target = intel_cpufreq_target, cppc_cpufreq.c:401: .target = cppc_cpufreq_set_target, cpufreq-nforce2.c:371: .target = nforce2_target, sh-cpufreq.c:163: .target = sh_cpufreq_target, pcc-cpufreq.c:573: .target = pcc_cpufreq_target, Similarly to the path taken for target_index() calls in the cpufreq core during a frequency change, all of the drivers above will mark the end of a frequency change by a call to cpufreq_freq_transition_end(). Therefore, cpufreq_freq_transition_end() can be used as the location for the arch_set_freq_scale() call to potentially inform the scheduler of the frequency change. This change maintains the previous functionality for the drivers that implement the target_index() callback, while also adding support for the few drivers that implement the deprecated target() callback. fast_switch() ============= This callback *has* to return the frequency that was selected. setpolicy() =========== This callback does not have any designated way of informing what was the end choice. But there are only two drivers using setpolicy(), and none of them have current FIE support: drivers/cpufreq/longrun.c:281: .setpolicy = longrun_set_policy, drivers/cpufreq/intel_pstate.c:2215: .setpolicy = intel_pstate_set_policy, The intel_pstate is known to use counter-driven frequency invariance. Conclusion ========== Given that the significant majority of current FIE enabled drivers use callbacks that lend themselves to triggering the setting of the FIE scale factor in a generic way, move the invariance setter calls to cpufreq core. As a result of setting the frequency scale factor in cpufreq core, after callbacks that lend themselves to trigger it, remove this functionality from the driver side. To be noted that despite marking a successful frequency change, many cpufreq drivers will consider the new frequency as the requested frequency, although this is might not be the one granted by the hardware. Therefore, the call to arch_set_freq_scale() is a "best effort" one, and it is up to the architecture if the new frequency is used in the new frequency scale factor setting (determined by the implementation of arch_set_freq_scale()) or eventually used by the scheduler (determined by the implementation of arch_scale_freq_capacity()). The architecture is in a better position to decide if it has better methods to obtain more accurate information regarding the current frequency and use that information instead (for example, the use of counters). Also, the implementation to arch_set_freq_scale() will now have to handle error conditions (current frequency == 0) in order to prevent the overhead in cpufreq core when the default arch_set_freq_scale() implementation is used. Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com> Suggested-by: Valentin Schneider <valentin.schneider@arm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-09-02 03:55:46 +07:00
u64 rate = policy->freq_table[index].frequency * 1000;
struct scpi_data *priv = policy->driver_data;
int ret;
ret = clk_set_rate(priv->clk, rate);
if (ret)
return ret;
if (clk_get_rate(priv->clk) != rate)
return -EIO;
return 0;
}
static int
scpi_get_sharing_cpus(struct device *cpu_dev, struct cpumask *cpumask)
{
int cpu, domain, tdomain;
struct device *tcpu_dev;
domain = scpi_ops->device_domain_id(cpu_dev);
if (domain < 0)
return domain;
for_each_possible_cpu(cpu) {
if (cpu == cpu_dev->id)
continue;
tcpu_dev = get_cpu_device(cpu);
if (!tcpu_dev)
continue;
tdomain = scpi_ops->device_domain_id(tcpu_dev);
if (tdomain == domain)
cpumask_set_cpu(cpu, cpumask);
}
return 0;
}
static int scpi_cpufreq_init(struct cpufreq_policy *policy)
{
int ret;
unsigned int latency;
struct device *cpu_dev;
struct scpi_data *priv;
struct cpufreq_frequency_table *freq_table;
cpu_dev = get_cpu_device(policy->cpu);
if (!cpu_dev) {
pr_err("failed to get cpu%d device\n", policy->cpu);
return -ENODEV;
}
ret = scpi_ops->add_opps_to_device(cpu_dev);
if (ret) {
dev_warn(cpu_dev, "failed to add opps to the device\n");
return ret;
}
ret = scpi_get_sharing_cpus(cpu_dev, policy->cpus);
if (ret) {
dev_warn(cpu_dev, "failed to get sharing cpumask\n");
return ret;
}
ret = dev_pm_opp_set_sharing_cpus(cpu_dev, policy->cpus);
if (ret) {
dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
__func__, ret);
return ret;
}
ret = dev_pm_opp_get_opp_count(cpu_dev);
if (ret <= 0) {
dev_dbg(cpu_dev, "OPP table is not ready, deferring probe\n");
ret = -EPROBE_DEFER;
goto out_free_opp;
}
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
goto out_free_opp;
}
ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
if (ret) {
dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
goto out_free_priv;
}
priv->cpu_dev = cpu_dev;
priv->clk = clk_get(cpu_dev, NULL);
if (IS_ERR(priv->clk)) {
dev_err(cpu_dev, "%s: Failed to get clk for cpu: %d\n",
__func__, cpu_dev->id);
ret = PTR_ERR(priv->clk);
goto out_free_cpufreq_table;
}
policy->driver_data = priv;
policy->freq_table = freq_table;
/* scpi allows DVFS request for any domain from any CPU */
policy->dvfs_possible_from_any_cpu = true;
latency = scpi_ops->get_transition_latency(cpu_dev);
if (!latency)
latency = CPUFREQ_ETERNAL;
policy->cpuinfo.transition_latency = latency;
policy->fast_switch_possible = false;
dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
return 0;
out_free_cpufreq_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
out_free_priv:
kfree(priv);
out_free_opp:
dev_pm_opp_remove_all_dynamic(cpu_dev);
return ret;
}
static int scpi_cpufreq_exit(struct cpufreq_policy *policy)
{
struct scpi_data *priv = policy->driver_data;
clk_put(priv->clk);
dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
dev_pm_opp_remove_all_dynamic(priv->cpu_dev);
kfree(priv);
return 0;
}
static struct cpufreq_driver scpi_cpufreq_driver = {
.name = "scpi-cpufreq",
.flags = CPUFREQ_STICKY | CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
CPUFREQ_NEED_INITIAL_FREQ_CHECK |
CPUFREQ_IS_COOLING_DEV,
.verify = cpufreq_generic_frequency_table_verify,
.attr = cpufreq_generic_attr,
.get = scpi_cpufreq_get_rate,
.init = scpi_cpufreq_init,
.exit = scpi_cpufreq_exit,
.target_index = scpi_cpufreq_set_target,
};
static int scpi_cpufreq_probe(struct platform_device *pdev)
{
int ret;
scpi_ops = get_scpi_ops();
if (!scpi_ops)
return -EIO;
ret = cpufreq_register_driver(&scpi_cpufreq_driver);
if (ret)
dev_err(&pdev->dev, "%s: registering cpufreq failed, err: %d\n",
__func__, ret);
return ret;
}
static int scpi_cpufreq_remove(struct platform_device *pdev)
{
cpufreq_unregister_driver(&scpi_cpufreq_driver);
scpi_ops = NULL;
return 0;
}
static struct platform_driver scpi_cpufreq_platdrv = {
.driver = {
.name = "scpi-cpufreq",
},
.probe = scpi_cpufreq_probe,
.remove = scpi_cpufreq_remove,
};
module_platform_driver(scpi_cpufreq_platdrv);
MODULE_ALIAS("platform:scpi-cpufreq");
MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>");
MODULE_DESCRIPTION("ARM SCPI CPUFreq interface driver");
MODULE_LICENSE("GPL v2");