linux_dsm_epyc7002/drivers/gpu/drm/meson/meson_plane.c

234 lines
6.7 KiB
C
Raw Normal View History

drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 21:29:37 +07:00
/*
* Copyright (C) 2016 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
* Copyright (C) 2014 Endless Mobile
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, see <http://www.gnu.org/licenses/>.
*
* Written by:
* Jasper St. Pierre <jstpierre@mecheye.net>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_rect.h>
#include "meson_plane.h"
#include "meson_vpp.h"
#include "meson_viu.h"
#include "meson_canvas.h"
#include "meson_registers.h"
struct meson_plane {
struct drm_plane base;
struct meson_drm *priv;
};
#define to_meson_plane(x) container_of(x, struct meson_plane, base)
static int meson_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct drm_crtc_state *crtc_state;
struct drm_rect clip = { 0, };
if (!state->crtc)
return 0;
drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 21:29:37 +07:00
crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
clip.x2 = crtc_state->mode.hdisplay;
clip.y2 = crtc_state->mode.vdisplay;
return drm_plane_helper_check_state(state, &clip,
DRM_PLANE_HELPER_NO_SCALING,
DRM_PLANE_HELPER_NO_SCALING,
true, true);
}
/* Takes a fixed 16.16 number and converts it to integer. */
static inline int64_t fixed16_to_int(int64_t value)
{
return value >> 16;
}
static void meson_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct meson_plane *meson_plane = to_meson_plane(plane);
struct drm_plane_state *state = plane->state;
struct drm_framebuffer *fb = state->fb;
struct meson_drm *priv = meson_plane->priv;
struct drm_gem_cma_object *gem;
struct drm_rect src = {
.x1 = (state->src_x),
.y1 = (state->src_y),
.x2 = (state->src_x + state->src_w),
.y2 = (state->src_y + state->src_h),
};
struct drm_rect dest = {
.x1 = state->crtc_x,
.y1 = state->crtc_y,
.x2 = state->crtc_x + state->crtc_w,
.y2 = state->crtc_y + state->crtc_h,
};
unsigned long flags;
/*
* Update Coordinates
* Update Formats
* Update Buffer
* Enable Plane
*/
spin_lock_irqsave(&priv->drm->event_lock, flags);
/* Enable OSD and BLK0, set max global alpha */
priv->viu.osd1_ctrl_stat = OSD_ENABLE |
(0xFF << OSD_GLOBAL_ALPHA_SHIFT) |
OSD_BLK0_ENABLE;
/* Set up BLK0 to point to the right canvas */
priv->viu.osd1_blk0_cfg[0] = ((MESON_CANVAS_ID_OSD1 << OSD_CANVAS_SEL) |
OSD_ENDIANNESS_LE);
/* On GXBB, Use the old non-HDR RGB2YUV converter */
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
priv->viu.osd1_blk0_cfg[0] |= OSD_OUTPUT_COLOR_RGB;
drm: Nuke fb->pixel_format Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15 04:32:55 +07:00
switch (fb->format->format) {
drm: Add support for Amlogic Meson Graphic Controller The Amlogic Meson Display controller is composed of several components : DMC|---------------VPU (Video Processing Unit)----------------|------HHI------| | vd1 _______ _____________ _________________ | | D |-------| |----| | | | | HDMI PLL | D | vd2 | VIU | | Video Post | | Video Encoders |<---|-----VCLK | R |-------| |----| Processing | | | | | | osd2 | | | |---| Enci ----------|----|-----VDAC------| R |-------| CSC |----| Scalers | | Encp ----------|----|----HDMI-TX----| A | osd1 | | | Blenders | | Encl ----------|----|---------------| M |-------|______|----|____________| |________________| | | ___|__________________________________________________________|_______________| VIU: Video Input Unit --------------------- The Video Input Unit is in charge of the pixel scanout from the DDR memory. It fetches the frames addresses, stride and parameters from the "Canvas" memory. This part is also in charge of the CSC (Colorspace Conversion). It can handle 2 OSD Planes and 2 Video Planes. VPP: Video Post Processing -------------------------- The Video Post Processing is in charge of the scaling and blending of the various planes into a single pixel stream. There is a special "pre-blending" used by the video planes with a dedicated scaler and a "post-blending" to merge with the OSD Planes. The OSD planes also have a dedicated scaler for one of the OSD. VENC: Video Encoders -------------------- The VENC is composed of the multiple pixel encoders : - ENCI : Interlace Video encoder for CVBS and Interlace HDMI - ENCP : Progressive Video Encoder for HDMI - ENCL : LCD LVDS Encoder The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock tree and provides the scanout clock to the VPP and VIU. The ENCI is connected to a single VDAC for Composite Output. The ENCI and ENCP are connected to an on-chip HDMI Transceiver. This driver is a DRM/KMS driver using the following DRM components : - GEM-CMA - PRIME-CMA - Atomic Modesetting - FBDev-CMA For the following SoCs : - GXBB Family (S905) - GXL Family (S905X, S905D) - GXM Family (S912) The current driver only supports the CVBS PAL/NTSC output modes, but the CRTC/Planes management should support bigger modes. But Advanced Colorspace Conversion, Scaling and HDMI Modes will be added in a second time. The Device Tree bindings makes use of the endpoints video interface definitions to connect to the optional CVBS and in the future the HDMI Connector nodes. HDMI Support is planned for a next release. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
2016-11-10 21:29:37 +07:00
case DRM_FORMAT_XRGB8888:
/* For XRGB, replace the pixel's alpha by 0xFF */
writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ARGB;
break;
case DRM_FORMAT_ARGB8888:
/* For ARGB, use the pixel's alpha */
writel_bits_relaxed(OSD_REPLACE_EN, 0,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ARGB;
break;
case DRM_FORMAT_RGB888:
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
OSD_COLOR_MATRIX_24_RGB;
break;
case DRM_FORMAT_RGB565:
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
OSD_COLOR_MATRIX_16_RGB565;
break;
};
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
priv->viu.osd1_interlace = true;
dest.y1 /= 2;
dest.y2 /= 2;
} else
priv->viu.osd1_interlace = false;
/*
* The format of these registers is (x2 << 16 | x1),
* where x2 is exclusive.
* e.g. +30x1920 would be (1919 << 16) | 30
*/
priv->viu.osd1_blk0_cfg[1] = ((fixed16_to_int(src.x2) - 1) << 16) |
fixed16_to_int(src.x1);
priv->viu.osd1_blk0_cfg[2] = ((fixed16_to_int(src.y2) - 1) << 16) |
fixed16_to_int(src.y1);
priv->viu.osd1_blk0_cfg[3] = ((dest.x2 - 1) << 16) | dest.x1;
priv->viu.osd1_blk0_cfg[4] = ((dest.y2 - 1) << 16) | dest.y1;
/* Update Canvas with buffer address */
gem = drm_fb_cma_get_gem_obj(fb, 0);
meson_canvas_setup(priv, MESON_CANVAS_ID_OSD1,
gem->paddr, fb->pitches[0],
fb->height, MESON_CANVAS_WRAP_NONE,
MESON_CANVAS_BLKMODE_LINEAR);
spin_unlock_irqrestore(&priv->drm->event_lock, flags);
}
static void meson_plane_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct meson_plane *meson_plane = to_meson_plane(plane);
struct meson_drm *priv = meson_plane->priv;
/* Disable OSD1 */
writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
priv->io_base + _REG(VPP_MISC));
}
static const struct drm_plane_helper_funcs meson_plane_helper_funcs = {
.atomic_check = meson_plane_atomic_check,
.atomic_disable = meson_plane_atomic_disable,
.atomic_update = meson_plane_atomic_update,
};
static const struct drm_plane_funcs meson_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = drm_plane_cleanup,
.reset = drm_atomic_helper_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
static const uint32_t supported_drm_formats[] = {
DRM_FORMAT_ARGB8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_RGB888,
DRM_FORMAT_RGB565,
};
int meson_plane_create(struct meson_drm *priv)
{
struct meson_plane *meson_plane;
struct drm_plane *plane;
meson_plane = devm_kzalloc(priv->drm->dev, sizeof(*meson_plane),
GFP_KERNEL);
if (!meson_plane)
return -ENOMEM;
meson_plane->priv = priv;
plane = &meson_plane->base;
drm_universal_plane_init(priv->drm, plane, 0xFF,
&meson_plane_funcs,
supported_drm_formats,
ARRAY_SIZE(supported_drm_formats),
DRM_PLANE_TYPE_PRIMARY, "meson_primary_plane");
drm_plane_helper_add(plane, &meson_plane_helper_funcs);
priv->primary_plane = plane;
return 0;
}