linux_dsm_epyc7002/fs/fat/file.c

565 lines
14 KiB
C
Raw Normal View History

// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/fs/fat/file.c
*
* Written 1992,1993 by Werner Almesberger
*
* regular file handling primitives for fat-based filesystems
*/
#include <linux/capability.h>
#include <linux/module.h>
#include <linux/compat.h>
#include <linux/mount.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/fsnotify.h>
#include <linux/security.h>
fat: add fat_fallocate operation Implement preallocation via the fallocate syscall on VFAT partitions. This patch is based on an earlier patch of the same name which had some issues detailed below and did not get accepted. Refer https://lkml.org/lkml/2007/12/22/130. a) The preallocated space was not persistent when the FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict time. b) There was no need to zero out the clusters when the flag was set Instead of doing an expanding truncate, just allocate clusters and add them to the fat chain. This reduces preallocation time. Compatibility with windows: There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just does an expanding truncate. Thus reading from the preallocated area on windows returns null until data is written to it. When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was written to on windows, the windows driver freed-up the preallocated clusters and allocated new clusters for the new data. The freed up clusters gets reflected in the free space available for the partition which can be seen from the Volume properties. The windows chkdsk tool also does not report any errors on a disk containing files with preallocated space. And there is also no issue using linux fat fsck. because discard preallocated clusters at repair time. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 05:59:41 +07:00
#include <linux/falloc.h>
#include "fat.h"
fat: add fat_fallocate operation Implement preallocation via the fallocate syscall on VFAT partitions. This patch is based on an earlier patch of the same name which had some issues detailed below and did not get accepted. Refer https://lkml.org/lkml/2007/12/22/130. a) The preallocated space was not persistent when the FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict time. b) There was no need to zero out the clusters when the flag was set Instead of doing an expanding truncate, just allocate clusters and add them to the fat chain. This reduces preallocation time. Compatibility with windows: There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just does an expanding truncate. Thus reading from the preallocated area on windows returns null until data is written to it. When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was written to on windows, the windows driver freed-up the preallocated clusters and allocated new clusters for the new data. The freed up clusters gets reflected in the free space available for the partition which can be seen from the Volume properties. The windows chkdsk tool also does not report any errors on a disk containing files with preallocated space. And there is also no issue using linux fat fsck. because discard preallocated clusters at repair time. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 05:59:41 +07:00
static long fat_fallocate(struct file *file, int mode,
loff_t offset, loff_t len);
static int fat_ioctl_get_attributes(struct inode *inode, u32 __user *user_attr)
{
u32 attr;
inode_lock_shared(inode);
attr = fat_make_attrs(inode);
inode_unlock_shared(inode);
return put_user(attr, user_attr);
}
static int fat_ioctl_set_attributes(struct file *file, u32 __user *user_attr)
{
struct inode *inode = file_inode(file);
struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
int is_dir = S_ISDIR(inode->i_mode);
u32 attr, oldattr;
struct iattr ia;
int err;
err = get_user(attr, user_attr);
if (err)
goto out;
err = mnt_want_write_file(file);
if (err)
goto out;
inode_lock(inode);
/*
* ATTR_VOLUME and ATTR_DIR cannot be changed; this also
* prevents the user from turning us into a VFAT
* longname entry. Also, we obviously can't set
* any of the NTFS attributes in the high 24 bits.
*/
attr &= 0xff & ~(ATTR_VOLUME | ATTR_DIR);
/* Merge in ATTR_VOLUME and ATTR_DIR */
attr |= (MSDOS_I(inode)->i_attrs & ATTR_VOLUME) |
(is_dir ? ATTR_DIR : 0);
oldattr = fat_make_attrs(inode);
/* Equivalent to a chmod() */
ia.ia_valid = ATTR_MODE | ATTR_CTIME;
ia.ia_ctime = current_time(inode);
if (is_dir)
ia.ia_mode = fat_make_mode(sbi, attr, S_IRWXUGO);
else {
ia.ia_mode = fat_make_mode(sbi, attr,
S_IRUGO | S_IWUGO | (inode->i_mode & S_IXUGO));
}
/* The root directory has no attributes */
if (inode->i_ino == MSDOS_ROOT_INO && attr != ATTR_DIR) {
err = -EINVAL;
goto out_unlock_inode;
}
if (sbi->options.sys_immutable &&
((attr | oldattr) & ATTR_SYS) &&
!capable(CAP_LINUX_IMMUTABLE)) {
err = -EPERM;
goto out_unlock_inode;
}
/*
* The security check is questionable... We single
* out the RO attribute for checking by the security
* module, just because it maps to a file mode.
*/
err = security_inode_setattr(file->f_path.dentry, &ia);
if (err)
goto out_unlock_inode;
/* This MUST be done before doing anything irreversible... */
err = fat_setattr(file->f_path.dentry, &ia);
if (err)
goto out_unlock_inode;
fsnotify_change(file->f_path.dentry, ia.ia_valid);
if (sbi->options.sys_immutable) {
if (attr & ATTR_SYS)
inode->i_flags |= S_IMMUTABLE;
else
inode->i_flags &= ~S_IMMUTABLE;
}
fat_save_attrs(inode, attr);
mark_inode_dirty(inode);
out_unlock_inode:
inode_unlock(inode);
mnt_drop_write_file(file);
out:
return err;
}
static int fat_ioctl_get_volume_id(struct inode *inode, u32 __user *user_attr)
{
struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
return put_user(sbi->vol_id, user_attr);
}
static int fat_ioctl_fitrim(struct inode *inode, unsigned long arg)
{
struct super_block *sb = inode->i_sb;
struct fstrim_range __user *user_range;
struct fstrim_range range;
struct request_queue *q = bdev_get_queue(sb->s_bdev);
int err;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
if (!blk_queue_discard(q))
return -EOPNOTSUPP;
user_range = (struct fstrim_range __user *)arg;
if (copy_from_user(&range, user_range, sizeof(range)))
return -EFAULT;
range.minlen = max_t(unsigned int, range.minlen,
q->limits.discard_granularity);
err = fat_trim_fs(inode, &range);
if (err < 0)
return err;
if (copy_to_user(user_range, &range, sizeof(range)))
return -EFAULT;
return 0;
}
long fat_generic_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = file_inode(filp);
u32 __user *user_attr = (u32 __user *)arg;
switch (cmd) {
case FAT_IOCTL_GET_ATTRIBUTES:
return fat_ioctl_get_attributes(inode, user_attr);
case FAT_IOCTL_SET_ATTRIBUTES:
return fat_ioctl_set_attributes(filp, user_attr);
case FAT_IOCTL_GET_VOLUME_ID:
return fat_ioctl_get_volume_id(inode, user_attr);
case FITRIM:
return fat_ioctl_fitrim(inode, arg);
default:
return -ENOTTY; /* Inappropriate ioctl for device */
}
}
static int fat_file_release(struct inode *inode, struct file *filp)
{
if ((filp->f_mode & FMODE_WRITE) &&
MSDOS_SB(inode->i_sb)->options.flush) {
fat_flush_inodes(inode->i_sb, inode, NULL);
congestion_wait(BLK_RW_ASYNC, HZ/10);
}
return 0;
}
int fat_file_fsync(struct file *filp, loff_t start, loff_t end, int datasync)
{
struct inode *inode = filp->f_mapping->host;
int err;
err = __generic_file_fsync(filp, start, end, datasync);
if (err)
return err;
err = sync_mapping_buffers(MSDOS_SB(inode->i_sb)->fat_inode->i_mapping);
if (err)
return err;
return blkdev_issue_flush(inode->i_sb->s_bdev, GFP_KERNEL);
}
const struct file_operations fat_file_operations = {
.llseek = generic_file_llseek,
.read_iter = generic_file_read_iter,
.write_iter = generic_file_write_iter,
.mmap = generic_file_mmap,
.release = fat_file_release,
.unlocked_ioctl = fat_generic_ioctl,
.compat_ioctl = compat_ptr_ioctl,
.fsync = fat_file_fsync,
.splice_read = generic_file_splice_read,
.splice_write = iter_file_splice_write,
fat: add fat_fallocate operation Implement preallocation via the fallocate syscall on VFAT partitions. This patch is based on an earlier patch of the same name which had some issues detailed below and did not get accepted. Refer https://lkml.org/lkml/2007/12/22/130. a) The preallocated space was not persistent when the FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict time. b) There was no need to zero out the clusters when the flag was set Instead of doing an expanding truncate, just allocate clusters and add them to the fat chain. This reduces preallocation time. Compatibility with windows: There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just does an expanding truncate. Thus reading from the preallocated area on windows returns null until data is written to it. When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was written to on windows, the windows driver freed-up the preallocated clusters and allocated new clusters for the new data. The freed up clusters gets reflected in the free space available for the partition which can be seen from the Volume properties. The windows chkdsk tool also does not report any errors on a disk containing files with preallocated space. And there is also no issue using linux fat fsck. because discard preallocated clusters at repair time. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 05:59:41 +07:00
.fallocate = fat_fallocate,
};
static int fat_cont_expand(struct inode *inode, loff_t size)
{
struct address_space *mapping = inode->i_mapping;
loff_t start = inode->i_size, count = size - inode->i_size;
int err;
err = generic_cont_expand_simple(inode, size);
if (err)
goto out;
fat_truncate_time(inode, NULL, S_CTIME|S_MTIME);
mark_inode_dirty(inode);
if (IS_SYNC(inode)) {
int err2;
/*
* Opencode syncing since we don't have a file open to use
* standard fsync path.
*/
err = filemap_fdatawrite_range(mapping, start,
start + count - 1);
err2 = sync_mapping_buffers(mapping);
if (!err)
err = err2;
err2 = write_inode_now(inode, 1);
if (!err)
err = err2;
if (!err) {
err = filemap_fdatawait_range(mapping, start,
start + count - 1);
}
}
out:
return err;
}
fat: add fat_fallocate operation Implement preallocation via the fallocate syscall on VFAT partitions. This patch is based on an earlier patch of the same name which had some issues detailed below and did not get accepted. Refer https://lkml.org/lkml/2007/12/22/130. a) The preallocated space was not persistent when the FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict time. b) There was no need to zero out the clusters when the flag was set Instead of doing an expanding truncate, just allocate clusters and add them to the fat chain. This reduces preallocation time. Compatibility with windows: There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just does an expanding truncate. Thus reading from the preallocated area on windows returns null until data is written to it. When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was written to on windows, the windows driver freed-up the preallocated clusters and allocated new clusters for the new data. The freed up clusters gets reflected in the free space available for the partition which can be seen from the Volume properties. The windows chkdsk tool also does not report any errors on a disk containing files with preallocated space. And there is also no issue using linux fat fsck. because discard preallocated clusters at repair time. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 05:59:41 +07:00
/*
* Preallocate space for a file. This implements fat's fallocate file
* operation, which gets called from sys_fallocate system call. User
* space requests len bytes at offset. If FALLOC_FL_KEEP_SIZE is set
* we just allocate clusters without zeroing them out. Otherwise we
* allocate and zero out clusters via an expanding truncate.
*/
static long fat_fallocate(struct file *file, int mode,
loff_t offset, loff_t len)
{
int nr_cluster; /* Number of clusters to be allocated */
loff_t mm_bytes; /* Number of bytes to be allocated for file */
loff_t ondisksize; /* block aligned on-disk size in bytes*/
struct inode *inode = file->f_mapping->host;
struct super_block *sb = inode->i_sb;
struct msdos_sb_info *sbi = MSDOS_SB(sb);
int err = 0;
/* No support for hole punch or other fallocate flags. */
if (mode & ~FALLOC_FL_KEEP_SIZE)
return -EOPNOTSUPP;
/* No support for dir */
if (!S_ISREG(inode->i_mode))
return -EOPNOTSUPP;
inode_lock(inode);
fat: add fat_fallocate operation Implement preallocation via the fallocate syscall on VFAT partitions. This patch is based on an earlier patch of the same name which had some issues detailed below and did not get accepted. Refer https://lkml.org/lkml/2007/12/22/130. a) The preallocated space was not persistent when the FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict time. b) There was no need to zero out the clusters when the flag was set Instead of doing an expanding truncate, just allocate clusters and add them to the fat chain. This reduces preallocation time. Compatibility with windows: There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just does an expanding truncate. Thus reading from the preallocated area on windows returns null until data is written to it. When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was written to on windows, the windows driver freed-up the preallocated clusters and allocated new clusters for the new data. The freed up clusters gets reflected in the free space available for the partition which can be seen from the Volume properties. The windows chkdsk tool also does not report any errors on a disk containing files with preallocated space. And there is also no issue using linux fat fsck. because discard preallocated clusters at repair time. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 05:59:41 +07:00
if (mode & FALLOC_FL_KEEP_SIZE) {
ondisksize = inode->i_blocks << 9;
if ((offset + len) <= ondisksize)
goto error;
/* First compute the number of clusters to be allocated */
mm_bytes = offset + len - ondisksize;
nr_cluster = (mm_bytes + (sbi->cluster_size - 1)) >>
sbi->cluster_bits;
/* Start the allocation.We are not zeroing out the clusters */
while (nr_cluster-- > 0) {
err = fat_add_cluster(inode);
if (err)
goto error;
}
} else {
if ((offset + len) <= i_size_read(inode))
goto error;
/* This is just an expanding truncate */
err = fat_cont_expand(inode, (offset + len));
}
error:
inode_unlock(inode);
fat: add fat_fallocate operation Implement preallocation via the fallocate syscall on VFAT partitions. This patch is based on an earlier patch of the same name which had some issues detailed below and did not get accepted. Refer https://lkml.org/lkml/2007/12/22/130. a) The preallocated space was not persistent when the FALLOC_FL_KEEP_SIZE flag was set. It will deallocate cluster at evict time. b) There was no need to zero out the clusters when the flag was set Instead of doing an expanding truncate, just allocate clusters and add them to the fat chain. This reduces preallocation time. Compatibility with windows: There are no issues when FALLOC_FL_KEEP_SIZE is not set because it just does an expanding truncate. Thus reading from the preallocated area on windows returns null until data is written to it. When a file with preallocated area using the FALLOC_FL_KEEP_SIZE was written to on windows, the windows driver freed-up the preallocated clusters and allocated new clusters for the new data. The freed up clusters gets reflected in the free space available for the partition which can be seen from the Volume properties. The windows chkdsk tool also does not report any errors on a disk containing files with preallocated space. And there is also no issue using linux fat fsck. because discard preallocated clusters at repair time. Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Amit Sahrawat <a.sahrawat@samsung.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-21 05:59:41 +07:00
return err;
}
/* Free all clusters after the skip'th cluster. */
static int fat_free(struct inode *inode, int skip)
{
struct super_block *sb = inode->i_sb;
int err, wait, free_start, i_start, i_logstart;
if (MSDOS_I(inode)->i_start == 0)
return 0;
fat_cache_inval_inode(inode);
wait = IS_DIRSYNC(inode);
i_start = free_start = MSDOS_I(inode)->i_start;
i_logstart = MSDOS_I(inode)->i_logstart;
/* First, we write the new file size. */
if (!skip) {
MSDOS_I(inode)->i_start = 0;
MSDOS_I(inode)->i_logstart = 0;
}
MSDOS_I(inode)->i_attrs |= ATTR_ARCH;
fat_truncate_time(inode, NULL, S_CTIME|S_MTIME);
if (wait) {
err = fat_sync_inode(inode);
if (err) {
MSDOS_I(inode)->i_start = i_start;
MSDOS_I(inode)->i_logstart = i_logstart;
return err;
}
} else
mark_inode_dirty(inode);
/* Write a new EOF, and get the remaining cluster chain for freeing. */
if (skip) {
struct fat_entry fatent;
int ret, fclus, dclus;
ret = fat_get_cluster(inode, skip - 1, &fclus, &dclus);
if (ret < 0)
return ret;
else if (ret == FAT_ENT_EOF)
return 0;
fatent_init(&fatent);
ret = fat_ent_read(inode, &fatent, dclus);
if (ret == FAT_ENT_EOF) {
fatent_brelse(&fatent);
return 0;
} else if (ret == FAT_ENT_FREE) {
fat_fs_error(sb,
"%s: invalid cluster chain (i_pos %lld)",
__func__, MSDOS_I(inode)->i_pos);
ret = -EIO;
} else if (ret > 0) {
err = fat_ent_write(inode, &fatent, FAT_ENT_EOF, wait);
if (err)
ret = err;
}
fatent_brelse(&fatent);
if (ret < 0)
return ret;
free_start = ret;
}
inode->i_blocks = skip << (MSDOS_SB(sb)->cluster_bits - 9);
/* Freeing the remained cluster chain */
return fat_free_clusters(inode, free_start);
}
void fat_truncate_blocks(struct inode *inode, loff_t offset)
{
struct msdos_sb_info *sbi = MSDOS_SB(inode->i_sb);
const unsigned int cluster_size = sbi->cluster_size;
int nr_clusters;
/*
* This protects against truncating a file bigger than it was then
* trying to write into the hole.
*/
if (MSDOS_I(inode)->mmu_private > offset)
MSDOS_I(inode)->mmu_private = offset;
nr_clusters = (offset + (cluster_size - 1)) >> sbi->cluster_bits;
fat_free(inode, nr_clusters);
fat_flush_inodes(inode->i_sb, inode, NULL);
}
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
int fat_getattr(const struct path *path, struct kstat *stat,
u32 request_mask, unsigned int flags)
{
statx: Add a system call to make enhanced file info available Add a system call to make extended file information available, including file creation and some attribute flags where available through the underlying filesystem. The getattr inode operation is altered to take two additional arguments: a u32 request_mask and an unsigned int flags that indicate the synchronisation mode. This change is propagated to the vfs_getattr*() function. Functions like vfs_stat() are now inline wrappers around new functions vfs_statx() and vfs_statx_fd() to reduce stack usage. ======== OVERVIEW ======== The idea was initially proposed as a set of xattrs that could be retrieved with getxattr(), but the general preference proved to be for a new syscall with an extended stat structure. A number of requests were gathered for features to be included. The following have been included: (1) Make the fields a consistent size on all arches and make them large. (2) Spare space, request flags and information flags are provided for future expansion. (3) Better support for the y2038 problem [Arnd Bergmann] (tv_sec is an __s64). (4) Creation time: The SMB protocol carries the creation time, which could be exported by Samba, which will in turn help CIFS make use of FS-Cache as that can be used for coherency data (stx_btime). This is also specified in NFSv4 as a recommended attribute and could be exported by NFSD [Steve French]. (5) Lightweight stat: Ask for just those details of interest, and allow a netfs (such as NFS) to approximate anything not of interest, possibly without going to the server [Trond Myklebust, Ulrich Drepper, Andreas Dilger] (AT_STATX_DONT_SYNC). (6) Heavyweight stat: Force a netfs to go to the server, even if it thinks its cached attributes are up to date [Trond Myklebust] (AT_STATX_FORCE_SYNC). And the following have been left out for future extension: (7) Data version number: Could be used by userspace NFS servers [Aneesh Kumar]. Can also be used to modify fill_post_wcc() in NFSD which retrieves i_version directly, but has just called vfs_getattr(). It could get it from the kstat struct if it used vfs_xgetattr() instead. (There's disagreement on the exact semantics of a single field, since not all filesystems do this the same way). (8) BSD stat compatibility: Including more fields from the BSD stat such as creation time (st_btime) and inode generation number (st_gen) [Jeremy Allison, Bernd Schubert]. (9) Inode generation number: Useful for FUSE and userspace NFS servers [Bernd Schubert]. (This was asked for but later deemed unnecessary with the open-by-handle capability available and caused disagreement as to whether it's a security hole or not). (10) Extra coherency data may be useful in making backups [Andreas Dilger]. (No particular data were offered, but things like last backup timestamp, the data version number and the DOS archive bit would come into this category). (11) Allow the filesystem to indicate what it can/cannot provide: A filesystem can now say it doesn't support a standard stat feature if that isn't available, so if, for instance, inode numbers or UIDs don't exist or are fabricated locally... (This requires a separate system call - I have an fsinfo() call idea for this). (12) Store a 16-byte volume ID in the superblock that can be returned in struct xstat [Steve French]. (Deferred to fsinfo). (13) Include granularity fields in the time data to indicate the granularity of each of the times (NFSv4 time_delta) [Steve French]. (Deferred to fsinfo). (14) FS_IOC_GETFLAGS value. These could be translated to BSD's st_flags. Note that the Linux IOC flags are a mess and filesystems such as Ext4 define flags that aren't in linux/fs.h, so translation in the kernel may be a necessity (or, possibly, we provide the filesystem type too). (Some attributes are made available in stx_attributes, but the general feeling was that the IOC flags were to ext[234]-specific and shouldn't be exposed through statx this way). (15) Mask of features available on file (eg: ACLs, seclabel) [Brad Boyer, Michael Kerrisk]. (Deferred, probably to fsinfo. Finding out if there's an ACL or seclabal might require extra filesystem operations). (16) Femtosecond-resolution timestamps [Dave Chinner]. (A __reserved field has been left in the statx_timestamp struct for this - if there proves to be a need). (17) A set multiple attributes syscall to go with this. =============== NEW SYSTEM CALL =============== The new system call is: int ret = statx(int dfd, const char *filename, unsigned int flags, unsigned int mask, struct statx *buffer); The dfd, filename and flags parameters indicate the file to query, in a similar way to fstatat(). There is no equivalent of lstat() as that can be emulated with statx() by passing AT_SYMLINK_NOFOLLOW in flags. There is also no equivalent of fstat() as that can be emulated by passing a NULL filename to statx() with the fd of interest in dfd. Whether or not statx() synchronises the attributes with the backing store can be controlled by OR'ing a value into the flags argument (this typically only affects network filesystems): (1) AT_STATX_SYNC_AS_STAT tells statx() to behave as stat() does in this respect. (2) AT_STATX_FORCE_SYNC will require a network filesystem to synchronise its attributes with the server - which might require data writeback to occur to get the timestamps correct. (3) AT_STATX_DONT_SYNC will suppress synchronisation with the server in a network filesystem. The resulting values should be considered approximate. mask is a bitmask indicating the fields in struct statx that are of interest to the caller. The user should set this to STATX_BASIC_STATS to get the basic set returned by stat(). It should be noted that asking for more information may entail extra I/O operations. buffer points to the destination for the data. This must be 256 bytes in size. ====================== MAIN ATTRIBUTES RECORD ====================== The following structures are defined in which to return the main attribute set: struct statx_timestamp { __s64 tv_sec; __s32 tv_nsec; __s32 __reserved; }; struct statx { __u32 stx_mask; __u32 stx_blksize; __u64 stx_attributes; __u32 stx_nlink; __u32 stx_uid; __u32 stx_gid; __u16 stx_mode; __u16 __spare0[1]; __u64 stx_ino; __u64 stx_size; __u64 stx_blocks; __u64 __spare1[1]; struct statx_timestamp stx_atime; struct statx_timestamp stx_btime; struct statx_timestamp stx_ctime; struct statx_timestamp stx_mtime; __u32 stx_rdev_major; __u32 stx_rdev_minor; __u32 stx_dev_major; __u32 stx_dev_minor; __u64 __spare2[14]; }; The defined bits in request_mask and stx_mask are: STATX_TYPE Want/got stx_mode & S_IFMT STATX_MODE Want/got stx_mode & ~S_IFMT STATX_NLINK Want/got stx_nlink STATX_UID Want/got stx_uid STATX_GID Want/got stx_gid STATX_ATIME Want/got stx_atime{,_ns} STATX_MTIME Want/got stx_mtime{,_ns} STATX_CTIME Want/got stx_ctime{,_ns} STATX_INO Want/got stx_ino STATX_SIZE Want/got stx_size STATX_BLOCKS Want/got stx_blocks STATX_BASIC_STATS [The stuff in the normal stat struct] STATX_BTIME Want/got stx_btime{,_ns} STATX_ALL [All currently available stuff] stx_btime is the file creation time, stx_mask is a bitmask indicating the data provided and __spares*[] are where as-yet undefined fields can be placed. Time fields are structures with separate seconds and nanoseconds fields plus a reserved field in case we want to add even finer resolution. Note that times will be negative if before 1970; in such a case, the nanosecond fields will also be negative if not zero. The bits defined in the stx_attributes field convey information about a file, how it is accessed, where it is and what it does. The following attributes map to FS_*_FL flags and are the same numerical value: STATX_ATTR_COMPRESSED File is compressed by the fs STATX_ATTR_IMMUTABLE File is marked immutable STATX_ATTR_APPEND File is append-only STATX_ATTR_NODUMP File is not to be dumped STATX_ATTR_ENCRYPTED File requires key to decrypt in fs Within the kernel, the supported flags are listed by: KSTAT_ATTR_FS_IOC_FLAGS [Are any other IOC flags of sufficient general interest to be exposed through this interface?] New flags include: STATX_ATTR_AUTOMOUNT Object is an automount trigger These are for the use of GUI tools that might want to mark files specially, depending on what they are. Fields in struct statx come in a number of classes: (0) stx_dev_*, stx_blksize. These are local system information and are always available. (1) stx_mode, stx_nlinks, stx_uid, stx_gid, stx_[amc]time, stx_ino, stx_size, stx_blocks. These will be returned whether the caller asks for them or not. The corresponding bits in stx_mask will be set to indicate whether they actually have valid values. If the caller didn't ask for them, then they may be approximated. For example, NFS won't waste any time updating them from the server, unless as a byproduct of updating something requested. If the values don't actually exist for the underlying object (such as UID or GID on a DOS file), then the bit won't be set in the stx_mask, even if the caller asked for the value. In such a case, the returned value will be a fabrication. Note that there are instances where the type might not be valid, for instance Windows reparse points. (2) stx_rdev_*. This will be set only if stx_mode indicates we're looking at a blockdev or a chardev, otherwise will be 0. (3) stx_btime. Similar to (1), except this will be set to 0 if it doesn't exist. ======= TESTING ======= The following test program can be used to test the statx system call: samples/statx/test-statx.c Just compile and run, passing it paths to the files you want to examine. The file is built automatically if CONFIG_SAMPLES is enabled. Here's some example output. Firstly, an NFS directory that crosses to another FSID. Note that the AUTOMOUNT attribute is set because transiting this directory will cause d_automount to be invoked by the VFS. [root@andromeda ~]# /tmp/test-statx -A /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:26 Inode: 1703937 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Attributes: 0000000000001000 (-------- -------- -------- -------- -------- -------- ---m---- --------) Secondly, the result of automounting on that directory. [root@andromeda ~]# /tmp/test-statx /warthog/data statx(/warthog/data) = 0 results=7ff Size: 4096 Blocks: 8 IO Block: 1048576 directory Device: 00:27 Inode: 2 Links: 125 Access: (3777/drwxrwxrwx) Uid: 0 Gid: 4041 Access: 2016-11-24 09:02:12.219699527+0000 Modify: 2016-11-17 10:44:36.225653653+0000 Change: 2016-11-17 10:44:36.225653653+0000 Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-01-31 23:46:22 +07:00
struct inode *inode = d_inode(path->dentry);
generic_fillattr(inode, stat);
stat->blksize = MSDOS_SB(inode->i_sb)->cluster_size;
if (MSDOS_SB(inode->i_sb)->options.nfs == FAT_NFS_NOSTALE_RO) {
/* Use i_pos for ino. This is used as fileid of nfs. */
stat->ino = fat_i_pos_read(MSDOS_SB(inode->i_sb), inode);
}
return 0;
}
EXPORT_SYMBOL_GPL(fat_getattr);
static int fat_sanitize_mode(const struct msdos_sb_info *sbi,
struct inode *inode, umode_t *mode_ptr)
{
umode_t mask, perm;
/*
* Note, the basic check is already done by a caller of
* (attr->ia_mode & ~FAT_VALID_MODE)
*/
if (S_ISREG(inode->i_mode))
mask = sbi->options.fs_fmask;
else
mask = sbi->options.fs_dmask;
perm = *mode_ptr & ~(S_IFMT | mask);
/*
* Of the r and x bits, all (subject to umask) must be present. Of the
* w bits, either all (subject to umask) or none must be present.
*
* If fat_mode_can_hold_ro(inode) is false, can't change w bits.
*/
if ((perm & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO)))
return -EPERM;
if (fat_mode_can_hold_ro(inode)) {
if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask)))
return -EPERM;
} else {
if ((perm & S_IWUGO) != (S_IWUGO & ~mask))
return -EPERM;
}
*mode_ptr &= S_IFMT | perm;
return 0;
}
static int fat_allow_set_time(struct msdos_sb_info *sbi, struct inode *inode)
{
umode_t allow_utime = sbi->options.allow_utime;
if (!uid_eq(current_fsuid(), inode->i_uid)) {
if (in_group_p(inode->i_gid))
allow_utime >>= 3;
if (allow_utime & MAY_WRITE)
return 1;
}
/* use a default check */
return 0;
}
#define TIMES_SET_FLAGS (ATTR_MTIME_SET | ATTR_ATIME_SET | ATTR_TIMES_SET)
/* valid file mode bits */
#define FAT_VALID_MODE (S_IFREG | S_IFDIR | S_IRWXUGO)
int fat_setattr(struct dentry *dentry, struct iattr *attr)
{
struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb);
struct inode *inode = d_inode(dentry);
unsigned int ia_valid;
int error;
/* Check for setting the inode time. */
ia_valid = attr->ia_valid;
if (ia_valid & TIMES_SET_FLAGS) {
if (fat_allow_set_time(sbi, inode))
attr->ia_valid &= ~TIMES_SET_FLAGS;
}
error = setattr_prepare(dentry, attr);
attr->ia_valid = ia_valid;
if (error) {
if (sbi->options.quiet)
error = 0;
goto out;
}
/*
* Expand the file. Since inode_setattr() updates ->i_size
* before calling the ->truncate(), but FAT needs to fill the
* hole before it. XXX: this is no longer true with new truncate
* sequence.
*/
if (attr->ia_valid & ATTR_SIZE) {
inode_dio_wait(inode);
if (attr->ia_size > inode->i_size) {
error = fat_cont_expand(inode, attr->ia_size);
if (error || attr->ia_valid == ATTR_SIZE)
goto out;
attr->ia_valid &= ~ATTR_SIZE;
}
}
if (((attr->ia_valid & ATTR_UID) &&
(!uid_eq(attr->ia_uid, sbi->options.fs_uid))) ||
((attr->ia_valid & ATTR_GID) &&
(!gid_eq(attr->ia_gid, sbi->options.fs_gid))) ||
((attr->ia_valid & ATTR_MODE) &&
(attr->ia_mode & ~FAT_VALID_MODE)))
error = -EPERM;
if (error) {
if (sbi->options.quiet)
error = 0;
goto out;
}
/*
* We don't return -EPERM here. Yes, strange, but this is too
* old behavior.
*/
if (attr->ia_valid & ATTR_MODE) {
if (fat_sanitize_mode(sbi, inode, &attr->ia_mode) < 0)
attr->ia_valid &= ~ATTR_MODE;
}
if (attr->ia_valid & ATTR_SIZE) {
error = fat_block_truncate_page(inode, attr->ia_size);
if (error)
goto out;
down_write(&MSDOS_I(inode)->truncate_lock);
truncate_setsize(inode, attr->ia_size);
fat_truncate_blocks(inode, attr->ia_size);
up_write(&MSDOS_I(inode)->truncate_lock);
}
/*
* setattr_copy can't truncate these appropriately, so we'll
* copy them ourselves
*/
if (attr->ia_valid & ATTR_ATIME)
fat_truncate_time(inode, &attr->ia_atime, S_ATIME);
if (attr->ia_valid & ATTR_CTIME)
fat_truncate_time(inode, &attr->ia_ctime, S_CTIME);
if (attr->ia_valid & ATTR_MTIME)
fat_truncate_time(inode, &attr->ia_mtime, S_MTIME);
attr->ia_valid &= ~(ATTR_ATIME|ATTR_CTIME|ATTR_MTIME);
setattr_copy(inode, attr);
mark_inode_dirty(inode);
out:
return error;
}
EXPORT_SYMBOL_GPL(fat_setattr);
const struct inode_operations fat_file_inode_operations = {
.setattr = fat_setattr,
.getattr = fat_getattr,
.update_time = fat_update_time,
};