linux_dsm_epyc7002/drivers/cpufreq/imx-cpufreq-dt.c

// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright 2019 NXP
 */

#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/nvmem-consumer.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_opp.h>
#include <linux/slab.h>

#define OCOTP_CFG3_SPEED_GRADE_SHIFT	8
#define OCOTP_CFG3_SPEED_GRADE_MASK	(0x3 << 8)
#define IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK	(0xf << 8)
#define OCOTP_CFG3_MKT_SEGMENT_SHIFT    6
#define OCOTP_CFG3_MKT_SEGMENT_MASK     (0x3 << 6)

/* cpufreq-dt device registered by imx-cpufreq-dt */
static struct platform_device *cpufreq_dt_pdev;
static struct opp_table *cpufreq_opp_table;

static int imx_cpufreq_dt_probe(struct platform_device *pdev)
{
	struct device *cpu_dev = get_cpu_device(0);
	u32 cell_value, supported_hw[2];
	int speed_grade, mkt_segment;
	int ret;

	ret = nvmem_cell_read_u32(cpu_dev, "speed_grade", &cell_value);
	if (ret)
		return ret;

	if (of_machine_is_compatible("fsl,imx8mn"))
		speed_grade = (cell_value & IMX8MN_OCOTP_CFG3_SPEED_GRADE_MASK)
			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
	else
		speed_grade = (cell_value & OCOTP_CFG3_SPEED_GRADE_MASK)
			      >> OCOTP_CFG3_SPEED_GRADE_SHIFT;
	mkt_segment = (cell_value & OCOTP_CFG3_MKT_SEGMENT_MASK) >> OCOTP_CFG3_MKT_SEGMENT_SHIFT;

	/*
	 * Early samples without fuses written report "0 0" which means
	 * consumer segment and minimum speed grading.
	 *
	 * According to datasheet minimum speed grading is not supported for
	 * consumer parts so clamp to 1 to avoid warning for "no OPPs"
	 *
	 * Applies to i.MX8M series SoCs.
	 */
	if (mkt_segment == 0 && speed_grade == 0 && (
			of_machine_is_compatible("fsl,imx8mm") ||
			of_machine_is_compatible("fsl,imx8mn") ||
			of_machine_is_compatible("fsl,imx8mq")))
		speed_grade = 1;

	supported_hw[0] = BIT(speed_grade);
	supported_hw[1] = BIT(mkt_segment);
	dev_info(&pdev->dev, "cpu speed grade %d mkt segment %d supported-hw %#x %#x\n",
			speed_grade, mkt_segment, supported_hw[0], supported_hw[1]);

	cpufreq_opp_table = dev_pm_opp_set_supported_hw(cpu_dev, supported_hw, 2);
	if (IS_ERR(cpufreq_opp_table)) {
		ret = PTR_ERR(cpufreq_opp_table);
		dev_err(&pdev->dev, "Failed to set supported opp: %d\n", ret);
		return ret;
	}

	cpufreq_dt_pdev = platform_device_register_data(
			&pdev->dev, "cpufreq-dt", -1, NULL, 0);
	if (IS_ERR(cpufreq_dt_pdev)) {
		dev_pm_opp_put_supported_hw(cpufreq_opp_table);
		ret = PTR_ERR(cpufreq_dt_pdev);
		dev_err(&pdev->dev, "Failed to register cpufreq-dt: %d\n", ret);
		return ret;
	}

	return 0;
}

static int imx_cpufreq_dt_remove(struct platform_device *pdev)
{
	platform_device_unregister(cpufreq_dt_pdev);
	dev_pm_opp_put_supported_hw(cpufreq_opp_table);

	return 0;
}

static struct platform_driver imx_cpufreq_dt_driver = {
	.probe = imx_cpufreq_dt_probe,
	.remove = imx_cpufreq_dt_remove,
	.driver = {
		.name = "imx-cpufreq-dt",
	},
};
module_platform_driver(imx_cpufreq_dt_driver);

MODULE_ALIAS("platform:imx-cpufreq-dt");
MODULE_DESCRIPTION("Freescale i.MX cpufreq speed grading driver");
MODULE_LICENSE("GPL v2");