AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-11-30 08:56:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
ae8c4209af
linux_dsm_epyc7002/arch/arm/boot/dts/tegra20-seaboard.dts

684 lines
15 KiB
Plaintext
Raw Normal View History

arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 06:26:54 +07:00
/dts-v1/;
/include/ "tegra20.dtsi"
/ {
model = "NVIDIA Seaboard";
compatible = "nvidia,seaboard", "nvidia,tegra20";
memory {
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
reg = <0x00000000 0x40000000>;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 06:26:54 +07:00
};
ARM: dt: tegra: remove unnecessary unit addresses DT node names only need to include the unit address if it's required to make the node name unique. Remove the unnecessary unit addresses. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:17:47 +07:00
pinmux {
ARM: dt: tegra20: add pinmux to device tree This adds a complete pinmux configuration to all Tegra20 device tree files. This allows removal of board-dt-tegra20.c's use of the pinmux board files, and the special device tree handling in board-pinmux.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-16 05:27:36 +07:00
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
ata {
nvidia,pins = "ata";
nvidia,function = "ide";
};
atb {
nvidia,pins = "atb", "gma", "gme";
nvidia,function = "sdio4";
};
atc {
nvidia,pins = "atc";
nvidia,function = "nand";
};
atd {
nvidia,pins = "atd", "ate", "gmb", "spia",
"spib", "spic";
nvidia,function = "gmi";
};
cdev1 {
nvidia,pins = "cdev1";
nvidia,function = "plla_out";
};
cdev2 {
nvidia,pins = "cdev2";
nvidia,function = "pllp_out4";
};
crtp {
nvidia,pins = "crtp", "lm1";
nvidia,function = "crt";
};
csus {
nvidia,pins = "csus";
nvidia,function = "vi_sensor_clk";
};
dap1 {
nvidia,pins = "dap1";
nvidia,function = "dap1";
};
dap2 {
nvidia,pins = "dap2";
nvidia,function = "dap2";
};
dap3 {
nvidia,pins = "dap3";
nvidia,function = "dap3";
};
dap4 {
nvidia,pins = "dap4";
nvidia,function = "dap4";
};
dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
nvidia,function = "vi";
};
dtf {
nvidia,pins = "dtf";
nvidia,function = "i2c3";
};
gmc {
nvidia,pins = "gmc";
nvidia,function = "uartd";
};
gmd {
nvidia,pins = "gmd";
nvidia,function = "sflash";
};
gpu {
nvidia,pins = "gpu";
nvidia,function = "pwm";
};
gpu7 {
nvidia,pins = "gpu7";
nvidia,function = "rtck";
};
gpv {
nvidia,pins = "gpv", "slxa", "slxk";
nvidia,function = "pcie";
};
hdint {
nvidia,pins = "hdint", "lpw0", "lpw2", "lsc1",
ARM: dt: tegra seaboard: configure I2C2 pinmux The I2C2 controller can be routed to either pingroup DDC or PTA. Seaboard actually uses this as an I2C bus mux, and devices are connected to both pingroups. This change statically assigns the I2C2 controller to pingroup PTA, so that on-board devices can be accessed. The DDC pingroup is used for EDID/DDC accesses which are not yet required, given the absence of any Tegra graphics support. I2C muxing will be supported later. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-27 00:21:54 +07:00
"lsck", "lsda";
ARM: dt: tegra20: add pinmux to device tree This adds a complete pinmux configuration to all Tegra20 device tree files. This allows removal of board-dt-tegra20.c's use of the pinmux board files, and the special device tree handling in board-pinmux.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-16 05:27:36 +07:00
nvidia,function = "hdmi";
};
i2cp {
nvidia,pins = "i2cp";
nvidia,function = "i2cp";
};
irrx {
nvidia,pins = "irrx", "irtx";
nvidia,function = "uartb";
};
kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf";
nvidia,function = "kbc";
};
lcsn {
nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
"lsdi", "lvp0";
nvidia,function = "rsvd4";
};
ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lpp", "lsc0",
"lspi", "lvp1", "lvs";
nvidia,function = "displaya";
};
ARM: dt: tegra: seaboard: instantiate pinctrl-based I2C bus mux Tegra's I2C2 controller can be routed to either the PTA or DDC pin group on Seaboard. Define the pinctrl state nodes required to allow runtime control of this routing. Instantiate a pinctrl-i2cmux I2C bus mux that uses these pinctrl states. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-17 06:41:17 +07:00
owc {
nvidia,pins = "owc", "spdi", "spdo", "uac";
nvidia,function = "rsvd2";
};
ARM: dt: tegra20: add pinmux to device tree This adds a complete pinmux configuration to all Tegra20 device tree files. This allows removal of board-dt-tegra20.c's use of the pinmux board files, and the special device tree handling in board-pinmux.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-16 05:27:36 +07:00
pmc {
nvidia,pins = "pmc";
nvidia,function = "pwr_on";
};
rm {
nvidia,pins = "rm";
nvidia,function = "i2c1";
};
sdb {
nvidia,pins = "sdb", "sdc", "sdd";
nvidia,function = "sdio3";
};
sdio1 {
nvidia,pins = "sdio1";
nvidia,function = "sdio1";
};
slxc {
nvidia,pins = "slxc", "slxd";
nvidia,function = "spdif";
};
spid {
nvidia,pins = "spid", "spie", "spif";
nvidia,function = "spi1";
};
spig {
nvidia,pins = "spig", "spih";
nvidia,function = "spi2_alt";
};
uaa {
nvidia,pins = "uaa", "uab", "uda";
nvidia,function = "ulpi";
};
uad {
nvidia,pins = "uad";
nvidia,function = "irda";
};
uca {
nvidia,pins = "uca", "ucb";
nvidia,function = "uartc";
};
conf_ata {
nvidia,pins = "ata", "atb", "atc", "atd",
"cdev1", "cdev2", "dap1", "dap2",
ARM: dt: tegra: seaboard: instantiate pinctrl-based I2C bus mux Tegra's I2C2 controller can be routed to either the PTA or DDC pin group on Seaboard. Define the pinctrl state nodes required to allow runtime control of this routing. Instantiate a pinctrl-i2cmux I2C bus mux that uses these pinctrl states. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-17 06:41:17 +07:00
"dap4", "ddc", "dtf", "gma", "gmc", "gmd",
ARM: dt: tegra20: add pinmux to device tree This adds a complete pinmux configuration to all Tegra20 device tree files. This allows removal of board-dt-tegra20.c's use of the pinmux board files, and the special device tree handling in board-pinmux.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-16 05:27:36 +07:00
"gme", "gpu", "gpu7", "i2cp", "irrx",
"irtx", "pta", "rm", "sdc", "sdd",
"slxd", "slxk", "spdi", "spdo", "uac",
"uad", "uca", "ucb", "uda";
nvidia,pull = <0>;
nvidia,tristate = <0>;
};
conf_ate {
ARM: dt: tegra: seaboard: instantiate pinctrl-based I2C bus mux Tegra's I2C2 controller can be routed to either the PTA or DDC pin group on Seaboard. Define the pinctrl state nodes required to allow runtime control of this routing. Instantiate a pinctrl-i2cmux I2C bus mux that uses these pinctrl states. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-17 06:41:17 +07:00
nvidia,pins = "ate", "csus", "dap3",
ARM: dt: tegra20: add pinmux to device tree This adds a complete pinmux configuration to all Tegra20 device tree files. This allows removal of board-dt-tegra20.c's use of the pinmux board files, and the special device tree handling in board-pinmux.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-16 05:27:36 +07:00
"gpv", "owc", "slxc", "spib", "spid",
"spie";
nvidia,pull = <0>;
nvidia,tristate = <1>;
};
conf_ck32 {
nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
nvidia,pull = <0>;
};
conf_crtp {
nvidia,pins = "crtp", "gmb", "slxa", "spia",
"spig", "spih";
nvidia,pull = <2>;
nvidia,tristate = <1>;
};
conf_dta {
nvidia,pins = "dta", "dtb", "dtc", "dtd";
nvidia,pull = <1>;
nvidia,tristate = <0>;
};
conf_dte {
nvidia,pins = "dte", "spif";
nvidia,pull = <1>;
nvidia,tristate = <1>;
};
conf_hdint {
nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
"lpw1", "lsc1", "lsck", "lsda", "lsdi",
"lvp0";
nvidia,tristate = <1>;
};
conf_kbca {
nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
"kbce", "kbcf", "sdio1", "spic", "uaa",
"uab";
nvidia,pull = <2>;
nvidia,tristate = <0>;
};
conf_lc {
nvidia,pins = "lc", "ls";
nvidia,pull = <2>;
};
conf_ld0 {
nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
"ld5", "ld6", "ld7", "ld8", "ld9",
"ld10", "ld11", "ld12", "ld13", "ld14",
"ld15", "ld16", "ld17", "ldi", "lhp0",
"lhp1", "lhp2", "lhs", "lm0", "lpp",
"lpw0", "lpw2", "lsc0", "lspi", "lvp1",
"lvs", "pmc", "sdb";
nvidia,tristate = <0>;
};
conf_ld17_0 {
nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
"ld23_22";
nvidia,pull = <1>;
};
drive_sdio1 {
nvidia,pins = "drive_sdio1";
nvidia,high-speed-mode = <0>;
nvidia,schmitt = <0>;
nvidia,low-power-mode = <3>;
nvidia,pull-down-strength = <31>;
nvidia,pull-up-strength = <31>;
nvidia,slew-rate-rising = <3>;
nvidia,slew-rate-falling = <3>;
};
};
ARM: dt: tegra: seaboard: instantiate pinctrl-based I2C bus mux Tegra's I2C2 controller can be routed to either the PTA or DDC pin group on Seaboard. Define the pinctrl state nodes required to allow runtime control of this routing. Instantiate a pinctrl-i2cmux I2C bus mux that uses these pinctrl states. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-17 06:41:17 +07:00
state_i2cmux_ddc: pinmux_i2cmux_ddc {
ddc {
nvidia,pins = "ddc";
nvidia,function = "i2c2";
};
pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
};
};
state_i2cmux_pta: pinmux_i2cmux_pta {
ddc {
nvidia,pins = "ddc";
nvidia,function = "rsvd4";
};
pta {
nvidia,pins = "pta";
nvidia,function = "i2c2";
};
};
state_i2cmux_idle: pinmux_i2cmux_idle {
ddc {
nvidia,pins = "ddc";
nvidia,function = "rsvd4";
};
pta {
nvidia,pins = "pta";
nvidia,function = "rsvd4";
};
};
ARM: dt: tegra20: add pinmux to device tree This adds a complete pinmux configuration to all Tegra20 device tree files. This allows removal of board-dt-tegra20.c's use of the pinmux board files, and the special device tree handling in board-pinmux.c. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Olof Johansson <olof@lixom.net>
2012-03-16 05:27:36 +07:00
};
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
i2s@70002800 {
status = "okay";
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
};
serial@70006300 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
clock-frequency = <216000000>;
};
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
i2c@7000c000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
clock-frequency = <400000>;
ARM: dt: tegra: Enable audio on WM8903 boards, disable others Add complete bindings to instantiate and configure the codec and top-level audio complex on all currently supported boards using the Tegra+WM8903 audio driver. On those boards, disable the I2S2 controller since it isn't used. On boards not using the WM8903 codec, disable all the audio devices; they can be re-enabled once the relevant codec and ASoC machine drivers have been ported to device-tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-12 06:09:57 +07:00
wm8903: wm8903@1a {
compatible = "wlf,wm8903";
reg = <0x1a>;
interrupt-parent = <&gpio>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <187 0x04>;
ARM: dt: tegra: Enable audio on WM8903 boards, disable others Add complete bindings to instantiate and configure the codec and top-level audio complex on all currently supported boards using the Tegra+WM8903 audio driver. On those boards, disable the I2S2 controller since it isn't used. On boards not using the WM8903 codec, disable all the audio devices; they can be re-enabled once the relevant codec and ASoC machine drivers have been ported to device-tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-12 06:09:57 +07:00
gpio-controller;
#gpio-cells = <2>;
micdet-cfg = <0>;
micdet-delay = <100>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>;
ARM: dt: tegra: Enable audio on WM8903 boards, disable others Add complete bindings to instantiate and configure the codec and top-level audio complex on all currently supported boards using the Tegra+WM8903 audio driver. On those boards, disable the I2S2 controller since it isn't used. On boards not using the WM8903 codec, disable all the audio devices; they can be re-enabled once the relevant codec and ASoC machine drivers have been ported to device-tree. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-01-12 06:09:57 +07:00
};
ARM: dt: tegra: enable als and proximity sensor Add the device info for ALS and proximity sensor for tegra boards cardhu, ventana and seaboard. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: s/PZ02/PZ2/ in .dts files, s/seabridge/seaboard/ in commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-23 19:11:36 +07:00
/* ALS and proximity sensor */
isl29018@44 {
compatible = "isil,isl29018";
reg = <0x44>;
interrupt-parent = <&gpio>;
ARM: dt: tegra: whitespace cleanup Consistently don't place a space after < or before >. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 05:11:38 +07:00
interrupts = <202 0x04>; /* GPIO PZ2 */
ARM: dt: tegra: enable als and proximity sensor Add the device info for ALS and proximity sensor for tegra boards cardhu, ventana and seaboard. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> [swarren: s/PZ02/PZ2/ in .dts files, s/seabridge/seaboard/ in commit description] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-23 19:11:36 +07:00
};
ARM: dt: tegra seaboard: add i2c devices Add the known i2c devices on seaboard to the i2c table. Also rename the temperature sensor device node, and mark it as a nct1008 instead of an adt7461 (which it is -- the chips are compatible though). Signed-off-by: Olof Johansson <olof@lixom.net> [swarren: Removed isl29018 from patch; it's already there now. Fixed interrupts properties now that Tegra GPIO is an interrupt controller. Moved smart-battery to the correct I2C bus.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2011-12-22 23:33:13 +07:00
gyrometer@68 {
compatible = "invn,mpu3050";
reg = <0x68>;
interrupt-parent = <&gpio>;
interrupts = <204 0x04>; /* gpio PZ4 */
};
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
};
i2c@7000c400 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
ARM: dt: tegra seaboard: fix I2C2 SCL rate This I2C bus is used for EDID/DDC reads and other "slow" I2C devices. This requires a 100KHz SCL (clock) rate. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-27 00:19:03 +07:00
clock-frequency = <100000>;
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
};
ARM: dt: tegra: seaboard: instantiate pinctrl-based I2C bus mux Tegra's I2C2 controller can be routed to either the PTA or DDC pin group on Seaboard. Define the pinctrl state nodes required to allow runtime control of this routing. Instantiate a pinctrl-i2cmux I2C bus mux that uses these pinctrl states. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-17 06:41:17 +07:00
i2cmux {
compatible = "i2c-mux-pinctrl";
#address-cells = <1>;
#size-cells = <0>;
i2c-parent = <&{/i2c@7000c400}>;
pinctrl-names = "ddc", "pta", "idle";
pinctrl-0 = <&state_i2cmux_ddc>;
pinctrl-1 = <&state_i2cmux_pta>;
pinctrl-2 = <&state_i2cmux_idle>;
i2c@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
};
i2c@1 {
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
ARM: dt: tegra seaboard: move battery monitor to mux'd I2C bus. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-26 05:57:28 +07:00
smart-battery@b {
compatible = "ti,bq20z75", "smart-battery-1.1";
reg = <0xb>;
ti,i2c-retry-count = <2>;
ti,poll-retry-count = <10>;
};
ARM: dt: tegra: seaboard: instantiate pinctrl-based I2C bus mux Tegra's I2C2 controller can be routed to either the PTA or DDC pin group on Seaboard. Define the pinctrl state nodes required to allow runtime control of this routing. Instantiate a pinctrl-i2cmux I2C bus mux that uses these pinctrl states. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-17 06:41:17 +07:00
};
};
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
i2c@7000c500 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
clock-frequency = <400000>;
};
i2c@7000d000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
clock-frequency = <400000>;
arm/dt: Add ADT7461 to Seaboard The ADT7461 is a temperature monitoring IC. One is present on the DVC I2C bus on Seaboard. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-18 13:29:32 +07:00
ARM: dt: tegra: seaboard: add regulators Seaboard uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. Two data sources were used for the data encoded here: * The HW defaults, as extracted from real HW. * The schematic, which specifies a voltage for each LDO rail. In most cases these sources matched. The only differences is: ldo6: The HW default on Springbank is 2.85v. The HW default on Seaboard is 1.8v. The schematics for both Springbank and Seaboard match at 2.85v. However, internal research indicates that the schematics are incorrectly labelled, and 1.8v is correct. The ChromeOS kernel also uses 1.8v. Note that these settings don't entirely match those in the ChromeOS kernel found at the URL below. However, the selected values generally cause no behavior change in the kernel, and so were picked to avoid regressions. repo http://git.chromium.org/chromiumos/third_party/kernel.git branch chromeos-3.2 file arch/arm/mach-tegra/board-seaboard-power.c Portions based on work by Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-21 04:58:34 +07:00
pmic: tps6586x@34 {
compatible = "ti,tps6586x";
reg = <0x34>;
interrupts = <0 86 0x4>;
ARM: dt: tegra: configure power off for some boards For Seaboard, Ventana, and Cardhu, add DT property to tell the regulator that it should provide the pm_power_off() implementation. This allows "shutdown" to work. Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-09-12 00:42:26 +07:00
ti,system-power-controller;
ARM: dt: tegra: seaboard: add regulators Seaboard uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. Two data sources were used for the data encoded here: * The HW defaults, as extracted from real HW. * The schematic, which specifies a voltage for each LDO rail. In most cases these sources matched. The only differences is: ldo6: The HW default on Springbank is 2.85v. The HW default on Seaboard is 1.8v. The schematics for both Springbank and Seaboard match at 2.85v. However, internal research indicates that the schematics are incorrectly labelled, and 1.8v is correct. The ChromeOS kernel also uses 1.8v. Note that these settings don't entirely match those in the ChromeOS kernel found at the URL below. However, the selected values generally cause no behavior change in the kernel, and so were picked to avoid regressions. repo http://git.chromium.org/chromiumos/third_party/kernel.git branch chromeos-3.2 file arch/arm/mach-tegra/board-seaboard-power.c Portions based on work by Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-21 04:58:34 +07:00
#gpio-cells = <2>;
gpio-controller;
sys-supply = <&vdd_5v0_reg>;
vin-sm0-supply = <&sys_reg>;
vin-sm1-supply = <&sys_reg>;
vin-sm2-supply = <&sys_reg>;
vinldo01-supply = <&sm2_reg>;
vinldo23-supply = <&sm2_reg>;
vinldo4-supply = <&sm2_reg>;
vinldo678-supply = <&sm2_reg>;
vinldo9-supply = <&sm2_reg>;
regulators {
#address-cells = <1>;
#size-cells = <0>;
sys_reg: regulator@0 {
reg = <0>;
regulator-compatible = "sys";
regulator-name = "vdd_sys";
regulator-always-on;
};
regulator@1 {
reg = <1>;
regulator-compatible = "sm0";
regulator-name = "vdd_sm0,vdd_core";
regulator-min-microvolt = <1300000>;
regulator-max-microvolt = <1300000>;
regulator-always-on;
};
regulator@2 {
reg = <2>;
regulator-compatible = "sm1";
regulator-name = "vdd_sm1,vdd_cpu";
regulator-min-microvolt = <1125000>;
regulator-max-microvolt = <1125000>;
regulator-always-on;
};
sm2_reg: regulator@3 {
reg = <3>;
regulator-compatible = "sm2";
regulator-name = "vdd_sm2,vin_ldo*";
regulator-min-microvolt = <3700000>;
regulator-max-microvolt = <3700000>;
regulator-always-on;
};
/* LDO0 is not connected to anything */
regulator@5 {
reg = <5>;
regulator-compatible = "ldo1";
regulator-name = "vdd_ldo1,avdd_pll*";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
regulator@6 {
reg = <6>;
regulator-compatible = "ldo2";
regulator-name = "vdd_ldo2,vdd_rtc";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
regulator@7 {
reg = <7>;
regulator-compatible = "ldo3";
regulator-name = "vdd_ldo3,avdd_usb*";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
regulator@8 {
reg = <8>;
regulator-compatible = "ldo4";
regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
regulator@9 {
reg = <9>;
regulator-compatible = "ldo5";
regulator-name = "vdd_ldo5,vcore_mmc";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
regulator@10 {
reg = <10>;
regulator-compatible = "ldo6";
regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
regulator@11 {
reg = <11>;
regulator-compatible = "ldo7";
regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
regulator@12 {
reg = <12>;
regulator-compatible = "ldo8";
regulator-name = "vdd_ldo8,avdd_hdmi_pll";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
regulator@13 {
reg = <13>;
regulator-compatible = "ldo9";
regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
regulator-always-on;
};
regulator@14 {
reg = <14>;
regulator-compatible = "ldo_rtc";
regulator-name = "vdd_rtc_out,vdd_cell";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
ARM: dt: tegra seaboard: add i2c devices Add the known i2c devices on seaboard to the i2c table. Also rename the temperature sensor device node, and mark it as a nct1008 instead of an adt7461 (which it is -- the chips are compatible though). Signed-off-by: Olof Johansson <olof@lixom.net> [swarren: Removed isl29018 from patch; it's already there now. Fixed interrupts properties now that Tegra GPIO is an interrupt controller. Moved smart-battery to the correct I2C bus.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2011-12-22 23:33:13 +07:00
temperature-sensor@4c {
compatible = "nct1008";
arm/dt: Add ADT7461 to Seaboard The ADT7461 is a temperature monitoring IC. One is present on the DVC I2C bus on Seaboard. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-18 13:29:32 +07:00
reg = <0x4c>;
};
ARM: dt: tegra seaboard: add i2c devices Add the known i2c devices on seaboard to the i2c table. Also rename the temperature sensor device node, and mark it as a nct1008 instead of an adt7461 (which it is -- the chips are compatible though). Signed-off-by: Olof Johansson <olof@lixom.net> [swarren: Removed isl29018 from patch; it's already there now. Fixed interrupts properties now that Tegra GPIO is an interrupt controller. Moved smart-battery to the correct I2C bus.] Signed-off-by: Stephen Warren <swarren@nvidia.com>
2011-12-22 23:33:13 +07:00
magnetometer@c {
compatible = "ak8975";
reg = <0xc>;
interrupt-parent = <&gpio>;
interrupts = <109 0x04>; /* gpio PN5 */
};
arm/dt: tegra: Fix I2C nodes to match board files With board files, all I2C busses run at 400KHz. Fix the device-tree to be consistent with this. It's possible this is incorrect, but at least it keeps the board files and device-tree consistent. Also, disable any I2C controllers that the board files don't register, also for consistency. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:09 +07:00
};
ARM: dt: tegra: seaboard: add regulators Seaboard uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. Two data sources were used for the data encoded here: * The HW defaults, as extracted from real HW. * The schematic, which specifies a voltage for each LDO rail. In most cases these sources matched. The only differences is: ldo6: The HW default on Springbank is 2.85v. The HW default on Seaboard is 1.8v. The schematics for both Springbank and Seaboard match at 2.85v. However, internal research indicates that the schematics are incorrectly labelled, and 1.8v is correct. The ChromeOS kernel also uses 1.8v. Note that these settings don't entirely match those in the ChromeOS kernel found at the URL below. However, the selected values generally cause no behavior change in the kernel, and so were picked to avoid regressions. repo http://git.chromium.org/chromiumos/third_party/kernel.git branch chromeos-3.2 file arch/arm/mach-tegra/board-seaboard-power.c Portions based on work by Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-21 04:58:34 +07:00
pmc {
nvidia,invert-interrupt;
};
ARM: tegra: fix invalid unit-address in tegra*.dtsi Unit addresses, whilst written in hex, don't contain a 0x prefix. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-10-03 02:10:47 +07:00
memory-controller@7000f400 {
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
emc-table@190000 {
reg = <190000>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <190000>;
nvidia,emc-registers = <0x0000000c 0x00000026
0x00000009 0x00000003 0x00000004 0x00000004
0x00000002 0x0000000c 0x00000003 0x00000003
0x00000002 0x00000001 0x00000004 0x00000005
0x00000004 0x00000009 0x0000000d 0x0000059f
0x00000000 0x00000003 0x00000003 0x00000003
0x00000003 0x00000001 0x0000000b 0x000000c8
0x00000003 0x00000007 0x00000004 0x0000000f
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0xa06204ae
0x007dc010 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
arm/dt: tegra: Fix serial nodes to match board files Mark any serial ports that aren't registered by the board files as disabled in the device-tree files. In practice, none of the now-disabled ports ended up succeeding device probing because of the missing clock-frequency property. However, explicitly marking the devices disabled has the advantage of squashing the dev_warn() the failed probe causes, and documenting that we intend the port not to be used, rather than accidentally left out the property. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:10 +07:00
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
emc-table@380000 {
reg = <380000>;
compatible = "nvidia,tegra20-emc-table";
clock-frequency = <380000>;
nvidia,emc-registers = <0x00000017 0x0000004b
0x00000012 0x00000006 0x00000004 0x00000005
0x00000003 0x0000000c 0x00000006 0x00000006
0x00000003 0x00000001 0x00000004 0x00000005
0x00000004 0x00000009 0x0000000d 0x00000b5f
0x00000000 0x00000003 0x00000003 0x00000006
0x00000006 0x00000001 0x00000011 0x000000c8
0x00000003 0x0000000e 0x00000007 0x0000000f
0x00000002 0x00000000 0x00000000 0x00000002
0x00000000 0x00000000 0x00000083 0xe044048b
0x007d8010 0x00000000 0x00000000 0x00000000
0x00000000 0x00000000 0x00000000 0x00000000>;
};
arm/dt: tegra: Fix serial nodes to match board files Mark any serial ports that aren't registered by the board files as disabled in the device-tree files. In practice, none of the now-disabled ports ended up succeeding device probing because of the missing clock-frequency property. However, explicitly marking the devices disabled has the advantage of squashing the dev_warn() the failed probe causes, and documenting that we intend the port not to be used, rather than accidentally left out the property. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:10 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
usb@c5000000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */
dr_mode = "otg";
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 06:26:54 +07:00
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
usb@c5004000 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
arm/dt: tegra: Fix serial nodes to match board files Mark any serial ports that aren't registered by the board files as disabled in the device-tree files. In practice, none of the now-disabled ports ended up succeeding device probing because of the missing clock-frequency property. However, explicitly marking the devices disabled has the advantage of squashing the dev_warn() the failed probe causes, and documenting that we intend the port not to be used, rather than accidentally left out the property. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:10 +07:00
};
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
usb@c5008000 {
status = "okay";
arm/dt: tegra: Fix SDHCI nodes to match board files Mark any SDHCI controllers that aren't registered by the board files as disabled in the device-tree files. In practice, these controllers: * Have nothing hooked up to them at all, or * For ports intended for SDIO usage, the drivers for anything that might be attached are not in the device-tree yet. If/when drivers appear, the SD/MMC port can be re-enabled. The only possible exception is TrimSlice's mico SD slot, but that wasn't enabled in the board files before anyway, and doesn't work when all the SDHCI controllers are enabled anyway. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-11-22 04:44:11 +07:00
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 06:26:54 +07:00
sdhci@c8000400 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
arm/dt: Tegra: Update SDHCI nodes to match bindings The bindings were recently updated to have separate properties for each type of GPIO. Update the Device Tree source to match that. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-20 23:46:25 +07:00
cd-gpios = <&gpio 69 0>; /* gpio PI5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
power-gpios = <&gpio 70 0>; /* gpio PI6 */
mmc: dt: Consolidate DT bindings This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-13 11:14:24 +07:00
bus-width = <4>;
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 06:26:54 +07:00
};
arm/dt: Tegra: Add support-8bit to SDHCI nodes For Seaboard's internal eMMC, this makes the difference between a 5.5MB/s and 10.2MB/s transfer rate. On Harmony, there wasn't any measurable difference on my cheap/slow ~2MB/s card. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-20 23:46:26 +07:00
sdhci@c8000600 {
ARM: dt: tegra: invert status=disable vs status=okay In tegra*.dtsi, set status="disable" for all HW modules that the board design may choose not to use. Update all boards to specifically enable any of those modules that are useful by setting status="okay". This makes board files say which features they do use, rather than which they don't, which feels more logical. It also makes the .dts files slightly smaller, at least for existing content. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:32:56 +07:00
status = "okay";
mmc: dt: Consolidate DT bindings This patch unifies the current DT MMC bindings documentation and code, adds generic MMC DT bindings documentation, and updates .dts files for consistency. [cjb: typo fixes, addition of max-frequency property] Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-05-13 11:14:24 +07:00
bus-width = <8>;
arm/dt: Tegra: Add support-8bit to SDHCI nodes For Seaboard's internal eMMC, this makes the difference between a 5.5MB/s and 10.2MB/s transfer rate. On Harmony, there wasn't any measurable difference on my cheap/slow ~2MB/s card. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-09-20 23:46:26 +07:00
};
arm/dt: add basic usb nodes to tegra device trees For now they are a minimal binding. It needs to be amended with vendor-specific settings for phy setup and link tuning, etc. v2: Added bindings specification and phy_type properties Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Stephen Warren <swarren@nvidia.com>
2011-11-04 16:12:39 +07:00
arm/tegra: Seaboard: Add GPIO key device tree nodes This brings all the GPIO key definitions from board-seaboard.c into tegra-seaboard.dtsi. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2011-12-18 12:18:23 +07:00
gpio-keys {
compatible = "gpio-keys";
power {
label = "Power";
gpios = <&gpio 170 1>; /* gpio PV2, active low */
linux,code = <116>; /* KEY_POWER */
gpio-key,wakeup;
};
lid {
label = "Lid";
gpios = <&gpio 23 0>; /* gpio PC7 */
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
gpio-key,wakeup;
};
};
ARM: tegra: seaboard: add EMC table to device tree Timings for the T25 version of seaboard, only one memory manufacturer and timing table (two speeds). Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-19 01:06:06 +07:00
ARM: dt: tegra: seaboard: add regulators Seaboard uses a TPS6586x regulator. Instantiate this, and hook up a couple of fixed GPIO-controlled regulators too. Two data sources were used for the data encoded here: * The HW defaults, as extracted from real HW. * The schematic, which specifies a voltage for each LDO rail. In most cases these sources matched. The only differences is: ldo6: The HW default on Springbank is 2.85v. The HW default on Seaboard is 1.8v. The schematics for both Springbank and Seaboard match at 2.85v. However, internal research indicates that the schematics are incorrectly labelled, and 1.8v is correct. The ChromeOS kernel also uses 1.8v. Note that these settings don't entirely match those in the ChromeOS kernel found at the URL below. However, the selected values generally cause no behavior change in the kernel, and so were picked to avoid regressions. repo http://git.chromium.org/chromiumos/third_party/kernel.git branch chromeos-3.2 file arch/arm/mach-tegra/board-seaboard-power.c Portions based on work by Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-06-21 04:58:34 +07:00
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vdd_5v0_reg: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "vdd_5v0";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "vdd_1v5";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
gpio = <&pmic 0 0>;
};
regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "vdd_1v2";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
gpio = <&pmic 1 0>;
enable-active-high;
};
};
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
sound {
compatible = "nvidia,tegra-audio-wm8903-seaboard",
"nvidia,tegra-audio-wm8903";
nvidia,model = "NVIDIA Tegra Seaboard";
ARM: tegra: seaboard: add EMC table to device tree Timings for the T25 version of seaboard, only one memory manufacturer and timing table (two speeds). Signed-off-by: Olof Johansson <olof@lixom.net>
2011-10-19 01:06:06 +07:00
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
nvidia,audio-routing =
"Headphone Jack", "HPOUTR",
"Headphone Jack", "HPOUTL",
"Int Spk", "ROP",
"Int Spk", "RON",
"Int Spk", "LOP",
"Int Spk", "LON",
"Mic Jack", "MICBIAS",
"IN1R", "Mic Jack";
ARM: tegra: add USB ULPI PHY reset GPIO to device tree ULPI PHYs have a reset signal, and different boards use a different GPIO for this task. Add a property to device tree to represent this. I'm not sure if adding this property to the EHCI controller node is entirely correct; perhaps eventually we should have explicit separate nodes for the various PHYs. However, we don't have that right now, so this binding seems like a reasonable choice. Cc: <devicetree-discuss@lists.ozlabs.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-13 04:46:49 +07:00
ARM: dt: tegra: sort nodes based on bus order Sort the nodes according to the following rules: * First, any overrides for properties or nodes created by included files, in the order they appeared in the include file. * Second, any nodes with a reg property, in numerical order. * Third, any nodes without a reg property, in alphabetical order of node name. The second sorting rule at least will probably help if/when we need to explicitly insert nodes for the various busses in Tegra; that will just be an indentation change rather than also a node re-ordering. Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Olof Johansson <olof@lixom.net>
2012-05-12 06:03:26 +07:00
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&wm8903>;
nvidia,spkr-en-gpios = <&wm8903 2 0>;
nvidia,hp-det-gpios = <&gpio 185 0>; /* gpio PX1 */
ARM: tegra: add USB ULPI PHY reset GPIO to device tree ULPI PHYs have a reset signal, and different boards use a different GPIO for this task. Add a property to device tree to represent this. I'm not sure if adding this property to the EHCI controller node is entirely correct; perhaps eventually we should have explicit separate nodes for the various PHYs. However, we don't have that right now, so this binding seems like a reasonable choice. Cc: <devicetree-discuss@lists.ozlabs.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: <linux-usb@vger.kernel.org> Signed-off-by: Stephen Warren <swarren@nvidia.com>
2012-04-13 04:46:49 +07:00
};
arm/dt: tegra devicetree support Everything required to populate NVIDIA Tegra devices from the device tree. This patch adds a new DT_MACHINE_DESC() which matches against a tegra20 device tree. So far it only registers the on-chip devices, but it will be refined in follow on patches to configure clocks and pin IO from the device tree also. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-07-20 06:26:54 +07:00
};
Reference in New Issue Copy Permalink