overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
/*
|
|
|
|
*
|
|
|
|
* Copyright (C) 2011 Novell Inc.
|
|
|
|
*
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
* under the terms of the GNU General Public License version 2 as published by
|
|
|
|
* the Free Software Foundation.
|
|
|
|
*/
|
|
|
|
|
2017-02-02 23:54:15 +07:00
|
|
|
#include <uapi/linux/magic.h>
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
#include <linux/fs.h>
|
|
|
|
#include <linux/namei.h>
|
|
|
|
#include <linux/xattr.h>
|
|
|
|
#include <linux/mount.h>
|
|
|
|
#include <linux/parser.h>
|
|
|
|
#include <linux/module.h>
|
2014-10-24 05:14:38 +07:00
|
|
|
#include <linux/statfs.h>
|
2014-10-24 05:14:38 +07:00
|
|
|
#include <linux/seq_file.h>
|
2016-07-29 17:05:24 +07:00
|
|
|
#include <linux/posix_acl_xattr.h>
|
2017-11-07 18:55:04 +07:00
|
|
|
#include <linux/exportfs.h>
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
#include "overlayfs.h"
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
|
|
|
|
MODULE_DESCRIPTION("Overlay filesystem");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
|
|
|
|
|
|
|
|
struct ovl_dir_cache;
|
|
|
|
|
2014-12-13 06:59:52 +07:00
|
|
|
#define OVL_MAX_STACK 500
|
|
|
|
|
2016-12-16 17:02:57 +07:00
|
|
|
static bool ovl_redirect_dir_def = IS_ENABLED(CONFIG_OVERLAY_FS_REDIRECT_DIR);
|
|
|
|
module_param_named(redirect_dir, ovl_redirect_dir_def, bool, 0644);
|
|
|
|
MODULE_PARM_DESC(ovl_redirect_dir_def,
|
|
|
|
"Default to on or off for the redirect_dir feature");
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-12-11 17:28:10 +07:00
|
|
|
static bool ovl_redirect_always_follow =
|
|
|
|
IS_ENABLED(CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW);
|
|
|
|
module_param_named(redirect_always_follow, ovl_redirect_always_follow,
|
|
|
|
bool, 0644);
|
|
|
|
MODULE_PARM_DESC(ovl_redirect_always_follow,
|
|
|
|
"Follow redirects even if redirect_dir feature is turned off");
|
|
|
|
|
2017-06-21 19:28:36 +07:00
|
|
|
static bool ovl_index_def = IS_ENABLED(CONFIG_OVERLAY_FS_INDEX);
|
|
|
|
module_param_named(index, ovl_index_def, bool, 0644);
|
|
|
|
MODULE_PARM_DESC(ovl_index_def,
|
|
|
|
"Default to on or off for the inodes index feature");
|
|
|
|
|
2018-01-19 16:26:53 +07:00
|
|
|
static bool ovl_nfs_export_def = IS_ENABLED(CONFIG_OVERLAY_FS_NFS_EXPORT);
|
|
|
|
module_param_named(nfs_export, ovl_nfs_export_def, bool, 0644);
|
|
|
|
MODULE_PARM_DESC(ovl_nfs_export_def,
|
|
|
|
"Default to on or off for the NFS export feature");
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
static void ovl_entry_stack_free(struct ovl_entry *oe)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < oe->numlower; i++)
|
|
|
|
dput(oe->lowerstack[i].dentry);
|
|
|
|
}
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
static void ovl_dentry_release(struct dentry *dentry)
|
|
|
|
{
|
|
|
|
struct ovl_entry *oe = dentry->d_fsdata;
|
|
|
|
|
|
|
|
if (oe) {
|
2017-11-10 15:39:15 +07:00
|
|
|
ovl_entry_stack_free(oe);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
kfree_rcu(oe, rcu);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2017-04-08 18:49:07 +07:00
|
|
|
static int ovl_check_append_only(struct inode *inode, int flag)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* This test was moot in vfs may_open() because overlay inode does
|
|
|
|
* not have the S_APPEND flag, so re-check on real upper inode
|
|
|
|
*/
|
|
|
|
if (IS_APPEND(inode)) {
|
|
|
|
if ((flag & O_ACCMODE) != O_RDONLY && !(flag & O_APPEND))
|
|
|
|
return -EPERM;
|
|
|
|
if (flag & O_TRUNC)
|
|
|
|
return -EPERM;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2016-06-30 13:53:27 +07:00
|
|
|
static struct dentry *ovl_d_real(struct dentry *dentry,
|
|
|
|
const struct inode *inode,
|
2017-09-05 02:42:22 +07:00
|
|
|
unsigned int open_flags, unsigned int flags)
|
2016-03-27 03:14:37 +07:00
|
|
|
{
|
|
|
|
struct dentry *real;
|
2017-04-08 18:49:07 +07:00
|
|
|
int err;
|
2016-03-27 03:14:37 +07:00
|
|
|
|
2017-09-05 17:53:11 +07:00
|
|
|
if (flags & D_REAL_UPPER)
|
|
|
|
return ovl_dentry_upper(dentry);
|
|
|
|
|
2016-12-16 17:02:55 +07:00
|
|
|
if (!d_is_reg(dentry)) {
|
2016-03-27 03:14:37 +07:00
|
|
|
if (!inode || inode == d_inode(dentry))
|
|
|
|
return dentry;
|
|
|
|
goto bug;
|
|
|
|
}
|
|
|
|
|
2016-06-30 13:53:27 +07:00
|
|
|
if (open_flags) {
|
2017-04-08 18:49:07 +07:00
|
|
|
err = ovl_open_maybe_copy_up(dentry, open_flags);
|
2016-06-30 13:53:27 +07:00
|
|
|
if (err)
|
|
|
|
return ERR_PTR(err);
|
|
|
|
}
|
|
|
|
|
2016-03-27 03:14:37 +07:00
|
|
|
real = ovl_dentry_upper(dentry);
|
2017-04-08 18:49:07 +07:00
|
|
|
if (real && (!inode || inode == d_inode(real))) {
|
|
|
|
if (!inode) {
|
|
|
|
err = ovl_check_append_only(d_inode(real), open_flags);
|
|
|
|
if (err)
|
|
|
|
return ERR_PTR(err);
|
|
|
|
}
|
2016-03-27 03:14:37 +07:00
|
|
|
return real;
|
2017-04-08 18:49:07 +07:00
|
|
|
}
|
2016-03-27 03:14:37 +07:00
|
|
|
|
|
|
|
real = ovl_dentry_lower(dentry);
|
|
|
|
if (!real)
|
|
|
|
goto bug;
|
|
|
|
|
2016-11-29 16:20:24 +07:00
|
|
|
/* Handle recursion */
|
2017-09-05 02:42:22 +07:00
|
|
|
real = d_real(real, inode, open_flags, 0);
|
2016-11-29 16:20:24 +07:00
|
|
|
|
2016-03-27 03:14:37 +07:00
|
|
|
if (!inode || inode == d_inode(real))
|
|
|
|
return real;
|
|
|
|
bug:
|
2016-07-29 17:05:24 +07:00
|
|
|
WARN(1, "ovl_d_real(%pd4, %s:%lu): real dentry not found\n", dentry,
|
2016-03-27 03:14:37 +07:00
|
|
|
inode ? inode->i_sb->s_id : "NULL", inode ? inode->i_ino : 0);
|
|
|
|
return dentry;
|
|
|
|
}
|
|
|
|
|
2015-06-22 18:53:48 +07:00
|
|
|
static int ovl_dentry_revalidate(struct dentry *dentry, unsigned int flags)
|
|
|
|
{
|
|
|
|
struct ovl_entry *oe = dentry->d_fsdata;
|
|
|
|
unsigned int i;
|
|
|
|
int ret = 1;
|
|
|
|
|
|
|
|
for (i = 0; i < oe->numlower; i++) {
|
|
|
|
struct dentry *d = oe->lowerstack[i].dentry;
|
|
|
|
|
|
|
|
if (d->d_flags & DCACHE_OP_REVALIDATE) {
|
|
|
|
ret = d->d_op->d_revalidate(d, flags);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
if (!ret) {
|
|
|
|
if (!(flags & LOOKUP_RCU))
|
|
|
|
d_invalidate(d);
|
|
|
|
return -ESTALE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ovl_dentry_weak_revalidate(struct dentry *dentry, unsigned int flags)
|
|
|
|
{
|
|
|
|
struct ovl_entry *oe = dentry->d_fsdata;
|
|
|
|
unsigned int i;
|
|
|
|
int ret = 1;
|
|
|
|
|
|
|
|
for (i = 0; i < oe->numlower; i++) {
|
|
|
|
struct dentry *d = oe->lowerstack[i].dentry;
|
|
|
|
|
|
|
|
if (d->d_flags & DCACHE_OP_WEAK_REVALIDATE) {
|
|
|
|
ret = d->d_op->d_weak_revalidate(d, flags);
|
|
|
|
if (ret <= 0)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
static const struct dentry_operations ovl_dentry_operations = {
|
|
|
|
.d_release = ovl_dentry_release,
|
2016-03-27 03:14:37 +07:00
|
|
|
.d_real = ovl_d_real,
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
};
|
|
|
|
|
2015-06-22 18:53:48 +07:00
|
|
|
static const struct dentry_operations ovl_reval_dentry_operations = {
|
|
|
|
.d_release = ovl_dentry_release,
|
2016-03-27 03:14:37 +07:00
|
|
|
.d_real = ovl_d_real,
|
2015-06-22 18:53:48 +07:00
|
|
|
.d_revalidate = ovl_dentry_revalidate,
|
|
|
|
.d_weak_revalidate = ovl_dentry_weak_revalidate,
|
|
|
|
};
|
|
|
|
|
2017-06-12 13:54:40 +07:00
|
|
|
static struct kmem_cache *ovl_inode_cachep;
|
|
|
|
|
|
|
|
static struct inode *ovl_alloc_inode(struct super_block *sb)
|
|
|
|
{
|
|
|
|
struct ovl_inode *oi = kmem_cache_alloc(ovl_inode_cachep, GFP_KERNEL);
|
|
|
|
|
2017-09-26 01:09:53 +07:00
|
|
|
if (!oi)
|
|
|
|
return NULL;
|
|
|
|
|
2017-07-05 03:03:16 +07:00
|
|
|
oi->cache = NULL;
|
2017-07-05 03:03:16 +07:00
|
|
|
oi->redirect = NULL;
|
2017-07-05 03:03:16 +07:00
|
|
|
oi->version = 0;
|
2017-07-05 03:03:16 +07:00
|
|
|
oi->flags = 0;
|
2017-07-05 03:03:16 +07:00
|
|
|
oi->__upperdentry = NULL;
|
2017-07-05 03:03:16 +07:00
|
|
|
oi->lower = NULL;
|
2017-06-21 19:28:51 +07:00
|
|
|
mutex_init(&oi->lock);
|
2017-07-05 03:03:16 +07:00
|
|
|
|
2017-06-12 13:54:40 +07:00
|
|
|
return &oi->vfs_inode;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ovl_i_callback(struct rcu_head *head)
|
|
|
|
{
|
|
|
|
struct inode *inode = container_of(head, struct inode, i_rcu);
|
|
|
|
|
|
|
|
kmem_cache_free(ovl_inode_cachep, OVL_I(inode));
|
|
|
|
}
|
|
|
|
|
|
|
|
static void ovl_destroy_inode(struct inode *inode)
|
|
|
|
{
|
2017-07-05 03:03:16 +07:00
|
|
|
struct ovl_inode *oi = OVL_I(inode);
|
|
|
|
|
|
|
|
dput(oi->__upperdentry);
|
2018-01-14 23:35:40 +07:00
|
|
|
iput(oi->lower);
|
2017-07-05 03:03:16 +07:00
|
|
|
kfree(oi->redirect);
|
2017-07-28 02:54:06 +07:00
|
|
|
ovl_dir_cache_free(inode);
|
2017-06-21 19:28:51 +07:00
|
|
|
mutex_destroy(&oi->lock);
|
2017-07-05 03:03:16 +07:00
|
|
|
|
2017-06-12 13:54:40 +07:00
|
|
|
call_rcu(&inode->i_rcu, ovl_i_callback);
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
static void ovl_free_fs(struct ovl_fs *ofs)
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
{
|
2014-12-13 06:59:43 +07:00
|
|
|
unsigned i;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
dput(ofs->indexdir);
|
|
|
|
dput(ofs->workdir);
|
|
|
|
if (ofs->workdir_locked)
|
|
|
|
ovl_inuse_unlock(ofs->workbasedir);
|
|
|
|
dput(ofs->workbasedir);
|
|
|
|
if (ofs->upperdir_locked)
|
|
|
|
ovl_inuse_unlock(ofs->upper_mnt->mnt_root);
|
|
|
|
mntput(ofs->upper_mnt);
|
2018-03-29 00:22:41 +07:00
|
|
|
for (i = 0; i < ofs->numlower; i++)
|
2017-11-10 15:39:16 +07:00
|
|
|
mntput(ofs->lower_layers[i].mnt);
|
2018-03-29 00:22:41 +07:00
|
|
|
for (i = 0; i < ofs->numlowerfs; i++)
|
|
|
|
free_anon_bdev(ofs->lower_fs[i].pseudo_dev);
|
2017-11-10 15:39:16 +07:00
|
|
|
kfree(ofs->lower_layers);
|
2018-03-29 00:22:41 +07:00
|
|
|
kfree(ofs->lower_fs);
|
2017-11-10 15:39:16 +07:00
|
|
|
|
|
|
|
kfree(ofs->config.lowerdir);
|
|
|
|
kfree(ofs->config.upperdir);
|
|
|
|
kfree(ofs->config.workdir);
|
2017-12-11 17:28:10 +07:00
|
|
|
kfree(ofs->config.redirect_mode);
|
2017-11-10 15:39:16 +07:00
|
|
|
if (ofs->creator_cred)
|
|
|
|
put_cred(ofs->creator_cred);
|
|
|
|
kfree(ofs);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
static void ovl_put_super(struct super_block *sb)
|
|
|
|
{
|
|
|
|
struct ovl_fs *ofs = sb->s_fs_info;
|
|
|
|
|
|
|
|
ovl_free_fs(ofs);
|
|
|
|
}
|
|
|
|
|
2017-11-29 09:01:32 +07:00
|
|
|
/* Sync real dirty inodes in upper filesystem (if it exists) */
|
2017-01-23 19:32:21 +07:00
|
|
|
static int ovl_sync_fs(struct super_block *sb, int wait)
|
|
|
|
{
|
2017-11-10 15:39:16 +07:00
|
|
|
struct ovl_fs *ofs = sb->s_fs_info;
|
2017-01-23 19:32:21 +07:00
|
|
|
struct super_block *upper_sb;
|
|
|
|
int ret;
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
if (!ofs->upper_mnt)
|
2017-01-23 19:32:21 +07:00
|
|
|
return 0;
|
2017-11-29 09:01:32 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* If this is a sync(2) call or an emergency sync, all the super blocks
|
|
|
|
* will be iterated, including upper_sb, so no need to do anything.
|
|
|
|
*
|
|
|
|
* If this is a syncfs(2) call, then we do need to call
|
|
|
|
* sync_filesystem() on upper_sb, but enough if we do it when being
|
|
|
|
* called with wait == 1.
|
|
|
|
*/
|
|
|
|
if (!wait)
|
2017-01-23 19:32:21 +07:00
|
|
|
return 0;
|
|
|
|
|
2017-11-29 09:01:32 +07:00
|
|
|
upper_sb = ofs->upper_mnt->mnt_sb;
|
|
|
|
|
2017-01-23 19:32:21 +07:00
|
|
|
down_read(&upper_sb->s_umount);
|
2017-11-29 09:01:32 +07:00
|
|
|
ret = sync_filesystem(upper_sb);
|
2017-01-23 19:32:21 +07:00
|
|
|
up_read(&upper_sb->s_umount);
|
2017-11-29 09:01:32 +07:00
|
|
|
|
2017-01-23 19:32:21 +07:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
2014-10-24 05:14:38 +07:00
|
|
|
/**
|
|
|
|
* ovl_statfs
|
|
|
|
* @sb: The overlayfs super block
|
|
|
|
* @buf: The struct kstatfs to fill in with stats
|
|
|
|
*
|
|
|
|
* Get the filesystem statistics. As writes always target the upper layer
|
2014-12-13 06:59:46 +07:00
|
|
|
* filesystem pass the statfs to the upper filesystem (if it exists)
|
2014-10-24 05:14:38 +07:00
|
|
|
*/
|
|
|
|
static int ovl_statfs(struct dentry *dentry, struct kstatfs *buf)
|
|
|
|
{
|
|
|
|
struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
|
|
|
|
struct dentry *root_dentry = dentry->d_sb->s_root;
|
|
|
|
struct path path;
|
|
|
|
int err;
|
|
|
|
|
2014-12-13 06:59:46 +07:00
|
|
|
ovl_path_real(root_dentry, &path);
|
2014-10-24 05:14:38 +07:00
|
|
|
|
|
|
|
err = vfs_statfs(&path, buf);
|
|
|
|
if (!err) {
|
2016-12-16 17:02:56 +07:00
|
|
|
buf->f_namelen = ofs->namelen;
|
2014-10-24 05:14:38 +07:00
|
|
|
buf->f_type = OVERLAYFS_SUPER_MAGIC;
|
|
|
|
}
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2017-06-21 19:28:36 +07:00
|
|
|
/* Will this overlay be forced to mount/remount ro? */
|
2017-11-10 15:39:16 +07:00
|
|
|
static bool ovl_force_readonly(struct ovl_fs *ofs)
|
2017-06-21 19:28:36 +07:00
|
|
|
{
|
2017-11-10 15:39:16 +07:00
|
|
|
return (!ofs->upper_mnt || !ofs->workdir);
|
2017-06-21 19:28:36 +07:00
|
|
|
}
|
|
|
|
|
2017-12-11 17:28:10 +07:00
|
|
|
static const char *ovl_redirect_mode_def(void)
|
|
|
|
{
|
|
|
|
return ovl_redirect_dir_def ? "on" : "off";
|
|
|
|
}
|
|
|
|
|
2014-10-24 05:14:38 +07:00
|
|
|
/**
|
|
|
|
* ovl_show_options
|
|
|
|
*
|
|
|
|
* Prints the mount options for a given superblock.
|
|
|
|
* Returns zero; does not fail.
|
|
|
|
*/
|
|
|
|
static int ovl_show_options(struct seq_file *m, struct dentry *dentry)
|
|
|
|
{
|
|
|
|
struct super_block *sb = dentry->d_sb;
|
2017-11-10 15:39:16 +07:00
|
|
|
struct ovl_fs *ofs = sb->s_fs_info;
|
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
seq_show_option(m, "lowerdir", ofs->config.lowerdir);
|
|
|
|
if (ofs->config.upperdir) {
|
|
|
|
seq_show_option(m, "upperdir", ofs->config.upperdir);
|
|
|
|
seq_show_option(m, "workdir", ofs->config.workdir);
|
2014-12-13 06:59:51 +07:00
|
|
|
}
|
2017-11-10 15:39:16 +07:00
|
|
|
if (ofs->config.default_permissions)
|
2015-10-12 22:11:44 +07:00
|
|
|
seq_puts(m, ",default_permissions");
|
2017-12-11 17:28:10 +07:00
|
|
|
if (strcmp(ofs->config.redirect_mode, ovl_redirect_mode_def()) != 0)
|
|
|
|
seq_printf(m, ",redirect_dir=%s", ofs->config.redirect_mode);
|
2017-11-10 15:39:16 +07:00
|
|
|
if (ofs->config.index != ovl_index_def)
|
2017-12-11 17:28:10 +07:00
|
|
|
seq_printf(m, ",index=%s", ofs->config.index ? "on" : "off");
|
2018-01-19 16:26:53 +07:00
|
|
|
if (ofs->config.nfs_export != ovl_nfs_export_def)
|
|
|
|
seq_printf(m, ",nfs_export=%s", ofs->config.nfs_export ?
|
|
|
|
"on" : "off");
|
2014-10-24 05:14:38 +07:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
2015-01-03 00:26:49 +07:00
|
|
|
static int ovl_remount(struct super_block *sb, int *flags, char *data)
|
|
|
|
{
|
2017-11-10 15:39:16 +07:00
|
|
|
struct ovl_fs *ofs = sb->s_fs_info;
|
2015-01-03 00:26:49 +07:00
|
|
|
|
2017-11-28 04:05:09 +07:00
|
|
|
if (!(*flags & SB_RDONLY) && ovl_force_readonly(ofs))
|
2015-01-03 00:26:49 +07:00
|
|
|
return -EROFS;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
static const struct super_operations ovl_super_operations = {
|
2017-06-12 13:54:40 +07:00
|
|
|
.alloc_inode = ovl_alloc_inode,
|
|
|
|
.destroy_inode = ovl_destroy_inode,
|
|
|
|
.drop_inode = generic_delete_inode,
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
.put_super = ovl_put_super,
|
2017-01-23 19:32:21 +07:00
|
|
|
.sync_fs = ovl_sync_fs,
|
2014-10-24 05:14:38 +07:00
|
|
|
.statfs = ovl_statfs,
|
2014-10-24 05:14:38 +07:00
|
|
|
.show_options = ovl_show_options,
|
2015-01-03 00:26:49 +07:00
|
|
|
.remount_fs = ovl_remount,
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
OPT_LOWERDIR,
|
|
|
|
OPT_UPPERDIR,
|
|
|
|
OPT_WORKDIR,
|
2015-10-12 22:11:44 +07:00
|
|
|
OPT_DEFAULT_PERMISSIONS,
|
2017-12-11 17:28:10 +07:00
|
|
|
OPT_REDIRECT_DIR,
|
2017-06-21 19:28:36 +07:00
|
|
|
OPT_INDEX_ON,
|
|
|
|
OPT_INDEX_OFF,
|
2018-01-19 16:26:53 +07:00
|
|
|
OPT_NFS_EXPORT_ON,
|
|
|
|
OPT_NFS_EXPORT_OFF,
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
OPT_ERR,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const match_table_t ovl_tokens = {
|
|
|
|
{OPT_LOWERDIR, "lowerdir=%s"},
|
|
|
|
{OPT_UPPERDIR, "upperdir=%s"},
|
|
|
|
{OPT_WORKDIR, "workdir=%s"},
|
2015-10-12 22:11:44 +07:00
|
|
|
{OPT_DEFAULT_PERMISSIONS, "default_permissions"},
|
2017-12-11 17:28:10 +07:00
|
|
|
{OPT_REDIRECT_DIR, "redirect_dir=%s"},
|
2017-06-21 19:28:36 +07:00
|
|
|
{OPT_INDEX_ON, "index=on"},
|
|
|
|
{OPT_INDEX_OFF, "index=off"},
|
2018-01-19 16:26:53 +07:00
|
|
|
{OPT_NFS_EXPORT_ON, "nfs_export=on"},
|
|
|
|
{OPT_NFS_EXPORT_OFF, "nfs_export=off"},
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
{OPT_ERR, NULL}
|
|
|
|
};
|
|
|
|
|
2014-11-20 22:40:00 +07:00
|
|
|
static char *ovl_next_opt(char **s)
|
|
|
|
{
|
|
|
|
char *sbegin = *s;
|
|
|
|
char *p;
|
|
|
|
|
|
|
|
if (sbegin == NULL)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
for (p = sbegin; *p; p++) {
|
|
|
|
if (*p == '\\') {
|
|
|
|
p++;
|
|
|
|
if (!*p)
|
|
|
|
break;
|
|
|
|
} else if (*p == ',') {
|
|
|
|
*p = '\0';
|
|
|
|
*s = p + 1;
|
|
|
|
return sbegin;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
*s = NULL;
|
|
|
|
return sbegin;
|
|
|
|
}
|
|
|
|
|
2017-12-11 17:28:10 +07:00
|
|
|
static int ovl_parse_redirect_mode(struct ovl_config *config, const char *mode)
|
|
|
|
{
|
|
|
|
if (strcmp(mode, "on") == 0) {
|
|
|
|
config->redirect_dir = true;
|
|
|
|
/*
|
|
|
|
* Does not make sense to have redirect creation without
|
|
|
|
* redirect following.
|
|
|
|
*/
|
|
|
|
config->redirect_follow = true;
|
|
|
|
} else if (strcmp(mode, "follow") == 0) {
|
|
|
|
config->redirect_follow = true;
|
|
|
|
} else if (strcmp(mode, "off") == 0) {
|
|
|
|
if (ovl_redirect_always_follow)
|
|
|
|
config->redirect_follow = true;
|
|
|
|
} else if (strcmp(mode, "nofollow") != 0) {
|
|
|
|
pr_err("overlayfs: bad mount option \"redirect_dir=%s\"\n",
|
|
|
|
mode);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
static int ovl_parse_opt(char *opt, struct ovl_config *config)
|
|
|
|
{
|
|
|
|
char *p;
|
|
|
|
|
2017-12-11 17:28:10 +07:00
|
|
|
config->redirect_mode = kstrdup(ovl_redirect_mode_def(), GFP_KERNEL);
|
|
|
|
if (!config->redirect_mode)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
2014-11-20 22:40:00 +07:00
|
|
|
while ((p = ovl_next_opt(&opt)) != NULL) {
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
int token;
|
|
|
|
substring_t args[MAX_OPT_ARGS];
|
|
|
|
|
|
|
|
if (!*p)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
token = match_token(p, ovl_tokens, args);
|
|
|
|
switch (token) {
|
|
|
|
case OPT_UPPERDIR:
|
|
|
|
kfree(config->upperdir);
|
|
|
|
config->upperdir = match_strdup(&args[0]);
|
|
|
|
if (!config->upperdir)
|
|
|
|
return -ENOMEM;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case OPT_LOWERDIR:
|
|
|
|
kfree(config->lowerdir);
|
|
|
|
config->lowerdir = match_strdup(&args[0]);
|
|
|
|
if (!config->lowerdir)
|
|
|
|
return -ENOMEM;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case OPT_WORKDIR:
|
|
|
|
kfree(config->workdir);
|
|
|
|
config->workdir = match_strdup(&args[0]);
|
|
|
|
if (!config->workdir)
|
|
|
|
return -ENOMEM;
|
|
|
|
break;
|
|
|
|
|
2015-10-12 22:11:44 +07:00
|
|
|
case OPT_DEFAULT_PERMISSIONS:
|
|
|
|
config->default_permissions = true;
|
|
|
|
break;
|
|
|
|
|
2017-12-11 17:28:10 +07:00
|
|
|
case OPT_REDIRECT_DIR:
|
|
|
|
kfree(config->redirect_mode);
|
|
|
|
config->redirect_mode = match_strdup(&args[0]);
|
|
|
|
if (!config->redirect_mode)
|
|
|
|
return -ENOMEM;
|
2016-12-16 17:02:56 +07:00
|
|
|
break;
|
|
|
|
|
2017-06-21 19:28:36 +07:00
|
|
|
case OPT_INDEX_ON:
|
|
|
|
config->index = true;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case OPT_INDEX_OFF:
|
|
|
|
config->index = false;
|
|
|
|
break;
|
|
|
|
|
2018-01-19 16:26:53 +07:00
|
|
|
case OPT_NFS_EXPORT_ON:
|
|
|
|
config->nfs_export = true;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case OPT_NFS_EXPORT_OFF:
|
|
|
|
config->nfs_export = false;
|
|
|
|
break;
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
default:
|
2015-01-15 12:17:36 +07:00
|
|
|
pr_err("overlayfs: unrecognized mount option \"%s\" or missing value\n", p);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
}
|
2015-01-15 12:20:57 +07:00
|
|
|
|
|
|
|
/* Workdir is useless in non-upper mount */
|
|
|
|
if (!config->upperdir && config->workdir) {
|
|
|
|
pr_info("overlayfs: option \"workdir=%s\" is useless in a non-upper mount, ignore\n",
|
|
|
|
config->workdir);
|
|
|
|
kfree(config->workdir);
|
|
|
|
config->workdir = NULL;
|
|
|
|
}
|
|
|
|
|
2017-12-11 17:28:10 +07:00
|
|
|
return ovl_parse_redirect_mode(config, config->redirect_mode);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
#define OVL_WORKDIR_NAME "work"
|
2017-06-21 19:28:36 +07:00
|
|
|
#define OVL_INDEXDIR_NAME "index"
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
static struct dentry *ovl_workdir_create(struct ovl_fs *ofs,
|
2017-06-21 19:28:35 +07:00
|
|
|
const char *name, bool persist)
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
{
|
2017-11-10 15:39:16 +07:00
|
|
|
struct inode *dir = ofs->workbasedir->d_inode;
|
|
|
|
struct vfsmount *mnt = ofs->upper_mnt;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
struct dentry *work;
|
|
|
|
int err;
|
|
|
|
bool retried = false;
|
2017-06-21 19:28:35 +07:00
|
|
|
bool locked = false;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2016-01-23 03:40:57 +07:00
|
|
|
inode_lock_nested(dir, I_MUTEX_PARENT);
|
2017-06-21 19:28:35 +07:00
|
|
|
locked = true;
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
retry:
|
2017-11-10 15:39:16 +07:00
|
|
|
work = lookup_one_len(name, ofs->workbasedir, strlen(name));
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
|
|
|
if (!IS_ERR(work)) {
|
2016-09-01 16:11:59 +07:00
|
|
|
struct iattr attr = {
|
|
|
|
.ia_valid = ATTR_MODE,
|
2016-12-05 00:33:17 +07:00
|
|
|
.ia_mode = S_IFDIR | 0,
|
2016-09-01 16:11:59 +07:00
|
|
|
};
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
|
|
|
if (work->d_inode) {
|
|
|
|
err = -EEXIST;
|
|
|
|
if (retried)
|
|
|
|
goto out_dput;
|
|
|
|
|
2017-06-21 19:28:35 +07:00
|
|
|
if (persist)
|
|
|
|
goto out_unlock;
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
retried = true;
|
2016-09-01 16:11:59 +07:00
|
|
|
ovl_workdir_cleanup(dir, mnt, work, 0);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
dput(work);
|
|
|
|
goto retry;
|
|
|
|
}
|
|
|
|
|
2016-12-05 00:33:17 +07:00
|
|
|
err = ovl_create_real(dir, work,
|
|
|
|
&(struct cattr){.mode = S_IFDIR | 0},
|
|
|
|
NULL, true);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
if (err)
|
|
|
|
goto out_dput;
|
2016-09-01 16:11:59 +07:00
|
|
|
|
2016-10-04 19:40:44 +07:00
|
|
|
/*
|
|
|
|
* Try to remove POSIX ACL xattrs from workdir. We are good if:
|
|
|
|
*
|
|
|
|
* a) success (there was a POSIX ACL xattr and was removed)
|
|
|
|
* b) -ENODATA (there was no POSIX ACL xattr)
|
|
|
|
* c) -EOPNOTSUPP (POSIX ACL xattrs are not supported)
|
|
|
|
*
|
|
|
|
* There are various other error values that could effectively
|
|
|
|
* mean that the xattr doesn't exist (e.g. -ERANGE is returned
|
|
|
|
* if the xattr name is too long), but the set of filesystems
|
|
|
|
* allowed as upper are limited to "normal" ones, where checking
|
|
|
|
* for the above two errors is sufficient.
|
|
|
|
*/
|
2016-09-01 16:11:59 +07:00
|
|
|
err = vfs_removexattr(work, XATTR_NAME_POSIX_ACL_DEFAULT);
|
2016-09-05 18:55:20 +07:00
|
|
|
if (err && err != -ENODATA && err != -EOPNOTSUPP)
|
2016-09-01 16:11:59 +07:00
|
|
|
goto out_dput;
|
|
|
|
|
|
|
|
err = vfs_removexattr(work, XATTR_NAME_POSIX_ACL_ACCESS);
|
2016-09-05 18:55:20 +07:00
|
|
|
if (err && err != -ENODATA && err != -EOPNOTSUPP)
|
2016-09-01 16:11:59 +07:00
|
|
|
goto out_dput;
|
|
|
|
|
|
|
|
/* Clear any inherited mode bits */
|
|
|
|
inode_lock(work->d_inode);
|
|
|
|
err = notify_change(work, &attr, NULL);
|
|
|
|
inode_unlock(work->d_inode);
|
|
|
|
if (err)
|
|
|
|
goto out_dput;
|
2017-06-21 19:28:35 +07:00
|
|
|
} else {
|
|
|
|
err = PTR_ERR(work);
|
|
|
|
goto out_err;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
}
|
|
|
|
out_unlock:
|
2017-06-21 19:28:35 +07:00
|
|
|
if (locked)
|
|
|
|
inode_unlock(dir);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
|
|
|
return work;
|
|
|
|
|
|
|
|
out_dput:
|
|
|
|
dput(work);
|
2017-06-21 19:28:35 +07:00
|
|
|
out_err:
|
|
|
|
pr_warn("overlayfs: failed to create directory %s/%s (errno: %i); mounting read-only\n",
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->config.workdir, name, -err);
|
2017-06-21 19:28:35 +07:00
|
|
|
work = NULL;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
goto out_unlock;
|
|
|
|
}
|
|
|
|
|
2014-11-20 22:40:00 +07:00
|
|
|
static void ovl_unescape(char *s)
|
|
|
|
{
|
|
|
|
char *d = s;
|
|
|
|
|
|
|
|
for (;; s++, d++) {
|
|
|
|
if (*s == '\\')
|
|
|
|
s++;
|
|
|
|
*d = *s;
|
|
|
|
if (!*s)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2014-12-13 06:59:49 +07:00
|
|
|
static int ovl_mount_dir_noesc(const char *name, struct path *path)
|
|
|
|
{
|
2014-12-13 06:59:52 +07:00
|
|
|
int err = -EINVAL;
|
2014-12-13 06:59:49 +07:00
|
|
|
|
2014-12-13 06:59:52 +07:00
|
|
|
if (!*name) {
|
|
|
|
pr_err("overlayfs: empty lowerdir\n");
|
|
|
|
goto out;
|
|
|
|
}
|
2014-12-13 06:59:49 +07:00
|
|
|
err = kern_path(name, LOOKUP_FOLLOW, path);
|
|
|
|
if (err) {
|
|
|
|
pr_err("overlayfs: failed to resolve '%s': %i\n", name, err);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
err = -EINVAL;
|
2015-06-22 18:53:48 +07:00
|
|
|
if (ovl_dentry_weird(path->dentry)) {
|
2014-12-13 06:59:49 +07:00
|
|
|
pr_err("overlayfs: filesystem on '%s' not supported\n", name);
|
|
|
|
goto out_put;
|
|
|
|
}
|
2016-12-16 17:02:56 +07:00
|
|
|
if (!d_is_dir(path->dentry)) {
|
2014-12-13 06:59:49 +07:00
|
|
|
pr_err("overlayfs: '%s' not a directory\n", name);
|
|
|
|
goto out_put;
|
|
|
|
}
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_put:
|
2017-11-09 16:23:28 +07:00
|
|
|
path_put_init(path);
|
2014-12-13 06:59:49 +07:00
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ovl_mount_dir(const char *name, struct path *path)
|
|
|
|
{
|
|
|
|
int err = -ENOMEM;
|
|
|
|
char *tmp = kstrdup(name, GFP_KERNEL);
|
|
|
|
|
|
|
|
if (tmp) {
|
|
|
|
ovl_unescape(tmp);
|
|
|
|
err = ovl_mount_dir_noesc(tmp, path);
|
2015-06-22 18:53:48 +07:00
|
|
|
|
|
|
|
if (!err)
|
|
|
|
if (ovl_dentry_remote(path->dentry)) {
|
|
|
|
pr_err("overlayfs: filesystem on '%s' not supported as upperdir\n",
|
|
|
|
tmp);
|
2017-11-09 16:23:28 +07:00
|
|
|
path_put_init(path);
|
2015-06-22 18:53:48 +07:00
|
|
|
err = -EINVAL;
|
|
|
|
}
|
2014-12-13 06:59:49 +07:00
|
|
|
kfree(tmp);
|
|
|
|
}
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2016-12-16 17:02:56 +07:00
|
|
|
static int ovl_check_namelen(struct path *path, struct ovl_fs *ofs,
|
|
|
|
const char *name)
|
2014-12-13 06:59:49 +07:00
|
|
|
{
|
|
|
|
struct kstatfs statfs;
|
2016-12-16 17:02:56 +07:00
|
|
|
int err = vfs_statfs(path, &statfs);
|
|
|
|
|
|
|
|
if (err)
|
|
|
|
pr_err("overlayfs: statfs failed on '%s'\n", name);
|
|
|
|
else
|
|
|
|
ofs->namelen = max(ofs->namelen, statfs.f_namelen);
|
|
|
|
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int ovl_lower_dir(const char *name, struct path *path,
|
|
|
|
struct ovl_fs *ofs, int *stack_depth, bool *remote)
|
|
|
|
{
|
2017-11-07 18:55:04 +07:00
|
|
|
int fh_type;
|
2016-12-16 17:02:56 +07:00
|
|
|
int err;
|
2014-12-13 06:59:49 +07:00
|
|
|
|
2014-12-13 06:59:52 +07:00
|
|
|
err = ovl_mount_dir_noesc(name, path);
|
2014-12-13 06:59:49 +07:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
2016-12-16 17:02:56 +07:00
|
|
|
err = ovl_check_namelen(path, ofs, name);
|
|
|
|
if (err)
|
2014-12-13 06:59:49 +07:00
|
|
|
goto out_put;
|
2016-12-16 17:02:56 +07:00
|
|
|
|
2014-12-13 06:59:49 +07:00
|
|
|
*stack_depth = max(*stack_depth, path->mnt->mnt_sb->s_stack_depth);
|
|
|
|
|
2015-06-22 18:53:48 +07:00
|
|
|
if (ovl_dentry_remote(path->dentry))
|
|
|
|
*remote = true;
|
|
|
|
|
2017-06-21 19:28:36 +07:00
|
|
|
/*
|
2018-01-19 16:26:53 +07:00
|
|
|
* The inodes index feature and NFS export need to encode and decode
|
|
|
|
* file handles, so they require that all layers support them.
|
2017-06-21 19:28:36 +07:00
|
|
|
*/
|
2017-11-07 18:55:04 +07:00
|
|
|
fh_type = ovl_can_decode_fh(path->dentry->d_sb);
|
2018-01-19 16:26:53 +07:00
|
|
|
if ((ofs->config.nfs_export ||
|
2017-11-07 18:55:04 +07:00
|
|
|
(ofs->config.index && ofs->config.upperdir)) && !fh_type) {
|
2017-06-21 19:28:36 +07:00
|
|
|
ofs->config.index = false;
|
2018-01-19 16:26:53 +07:00
|
|
|
ofs->config.nfs_export = false;
|
|
|
|
pr_warn("overlayfs: fs on '%s' does not support file handles, falling back to index=off,nfs_export=off.\n",
|
|
|
|
name);
|
2017-06-21 19:28:36 +07:00
|
|
|
}
|
|
|
|
|
2017-11-07 18:55:04 +07:00
|
|
|
/* Check if lower fs has 32bit inode numbers */
|
|
|
|
if (fh_type != FILEID_INO32_GEN)
|
|
|
|
ofs->xino_bits = 0;
|
|
|
|
|
2014-12-13 06:59:49 +07:00
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_put:
|
2017-11-09 16:23:28 +07:00
|
|
|
path_put_init(path);
|
2014-12-13 06:59:49 +07:00
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
/* Workdir should not be subdir of upperdir and vice versa */
|
|
|
|
static bool ovl_workdir_ok(struct dentry *workdir, struct dentry *upperdir)
|
|
|
|
{
|
|
|
|
bool ok = false;
|
|
|
|
|
|
|
|
if (workdir != upperdir) {
|
|
|
|
ok = (lock_rename(workdir, upperdir) == NULL);
|
|
|
|
unlock_rename(workdir, upperdir);
|
|
|
|
}
|
|
|
|
return ok;
|
|
|
|
}
|
|
|
|
|
2014-12-13 06:59:52 +07:00
|
|
|
static unsigned int ovl_split_lowerdirs(char *str)
|
|
|
|
{
|
|
|
|
unsigned int ctr = 1;
|
|
|
|
char *s, *d;
|
|
|
|
|
|
|
|
for (s = d = str;; s++, d++) {
|
|
|
|
if (*s == '\\') {
|
|
|
|
s++;
|
|
|
|
} else if (*s == ':') {
|
|
|
|
*d = '\0';
|
|
|
|
ctr++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
*d = *s;
|
|
|
|
if (!*s)
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
return ctr;
|
|
|
|
}
|
|
|
|
|
2016-08-22 22:52:55 +07:00
|
|
|
static int __maybe_unused
|
|
|
|
ovl_posix_acl_xattr_get(const struct xattr_handler *handler,
|
|
|
|
struct dentry *dentry, struct inode *inode,
|
|
|
|
const char *name, void *buffer, size_t size)
|
|
|
|
{
|
2017-07-20 16:08:21 +07:00
|
|
|
return ovl_xattr_get(dentry, inode, handler->name, buffer, size);
|
2016-08-22 22:52:55 +07:00
|
|
|
}
|
|
|
|
|
2016-08-22 21:36:49 +07:00
|
|
|
static int __maybe_unused
|
|
|
|
ovl_posix_acl_xattr_set(const struct xattr_handler *handler,
|
|
|
|
struct dentry *dentry, struct inode *inode,
|
|
|
|
const char *name, const void *value,
|
|
|
|
size_t size, int flags)
|
2016-07-29 17:05:24 +07:00
|
|
|
{
|
|
|
|
struct dentry *workdir = ovl_workdir(dentry);
|
2017-07-05 03:03:16 +07:00
|
|
|
struct inode *realinode = ovl_inode_real(inode);
|
2016-07-29 17:05:24 +07:00
|
|
|
struct posix_acl *acl = NULL;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* Check that everything is OK before copy-up */
|
|
|
|
if (value) {
|
|
|
|
acl = posix_acl_from_xattr(&init_user_ns, value, size);
|
|
|
|
if (IS_ERR(acl))
|
|
|
|
return PTR_ERR(acl);
|
|
|
|
}
|
|
|
|
err = -EOPNOTSUPP;
|
|
|
|
if (!IS_POSIXACL(d_inode(workdir)))
|
|
|
|
goto out_acl_release;
|
|
|
|
if (!realinode->i_op->set_acl)
|
|
|
|
goto out_acl_release;
|
|
|
|
if (handler->flags == ACL_TYPE_DEFAULT && !S_ISDIR(inode->i_mode)) {
|
|
|
|
err = acl ? -EACCES : 0;
|
|
|
|
goto out_acl_release;
|
|
|
|
}
|
|
|
|
err = -EPERM;
|
|
|
|
if (!inode_owner_or_capable(inode))
|
|
|
|
goto out_acl_release;
|
|
|
|
|
|
|
|
posix_acl_release(acl);
|
|
|
|
|
2016-10-31 20:42:14 +07:00
|
|
|
/*
|
|
|
|
* Check if sgid bit needs to be cleared (actual setacl operation will
|
|
|
|
* be done with mounter's capabilities and so that won't do it for us).
|
|
|
|
*/
|
|
|
|
if (unlikely(inode->i_mode & S_ISGID) &&
|
|
|
|
handler->flags == ACL_TYPE_ACCESS &&
|
|
|
|
!in_group_p(inode->i_gid) &&
|
|
|
|
!capable_wrt_inode_uidgid(inode, CAP_FSETID)) {
|
|
|
|
struct iattr iattr = { .ia_valid = ATTR_KILL_SGID };
|
|
|
|
|
|
|
|
err = ovl_setattr(dentry, &iattr);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2017-07-20 16:08:21 +07:00
|
|
|
err = ovl_xattr_set(dentry, inode, handler->name, value, size, flags);
|
2016-09-01 16:12:00 +07:00
|
|
|
if (!err)
|
2017-07-05 03:03:16 +07:00
|
|
|
ovl_copyattr(ovl_inode_real(inode), inode);
|
2016-09-01 16:12:00 +07:00
|
|
|
|
|
|
|
return err;
|
2016-07-29 17:05:24 +07:00
|
|
|
|
|
|
|
out_acl_release:
|
|
|
|
posix_acl_release(acl);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2016-08-22 22:52:55 +07:00
|
|
|
static int ovl_own_xattr_get(const struct xattr_handler *handler,
|
|
|
|
struct dentry *dentry, struct inode *inode,
|
|
|
|
const char *name, void *buffer, size_t size)
|
|
|
|
{
|
2016-11-16 16:22:39 +07:00
|
|
|
return -EOPNOTSUPP;
|
2016-08-22 22:52:55 +07:00
|
|
|
}
|
|
|
|
|
2016-07-29 17:05:24 +07:00
|
|
|
static int ovl_own_xattr_set(const struct xattr_handler *handler,
|
|
|
|
struct dentry *dentry, struct inode *inode,
|
|
|
|
const char *name, const void *value,
|
|
|
|
size_t size, int flags)
|
|
|
|
{
|
2016-11-16 16:22:39 +07:00
|
|
|
return -EOPNOTSUPP;
|
2016-07-29 17:05:24 +07:00
|
|
|
}
|
|
|
|
|
2016-08-22 22:52:55 +07:00
|
|
|
static int ovl_other_xattr_get(const struct xattr_handler *handler,
|
|
|
|
struct dentry *dentry, struct inode *inode,
|
|
|
|
const char *name, void *buffer, size_t size)
|
|
|
|
{
|
2017-07-20 16:08:21 +07:00
|
|
|
return ovl_xattr_get(dentry, inode, name, buffer, size);
|
2016-08-22 22:52:55 +07:00
|
|
|
}
|
|
|
|
|
2016-08-22 22:22:11 +07:00
|
|
|
static int ovl_other_xattr_set(const struct xattr_handler *handler,
|
|
|
|
struct dentry *dentry, struct inode *inode,
|
|
|
|
const char *name, const void *value,
|
|
|
|
size_t size, int flags)
|
|
|
|
{
|
2017-07-20 16:08:21 +07:00
|
|
|
return ovl_xattr_set(dentry, inode, name, value, size, flags);
|
2016-08-22 22:22:11 +07:00
|
|
|
}
|
|
|
|
|
2016-08-22 21:36:49 +07:00
|
|
|
static const struct xattr_handler __maybe_unused
|
|
|
|
ovl_posix_acl_access_xattr_handler = {
|
2016-07-29 17:05:24 +07:00
|
|
|
.name = XATTR_NAME_POSIX_ACL_ACCESS,
|
|
|
|
.flags = ACL_TYPE_ACCESS,
|
2016-08-22 22:52:55 +07:00
|
|
|
.get = ovl_posix_acl_xattr_get,
|
2016-07-29 17:05:24 +07:00
|
|
|
.set = ovl_posix_acl_xattr_set,
|
|
|
|
};
|
|
|
|
|
2016-08-22 21:36:49 +07:00
|
|
|
static const struct xattr_handler __maybe_unused
|
|
|
|
ovl_posix_acl_default_xattr_handler = {
|
2016-07-29 17:05:24 +07:00
|
|
|
.name = XATTR_NAME_POSIX_ACL_DEFAULT,
|
|
|
|
.flags = ACL_TYPE_DEFAULT,
|
2016-08-22 22:52:55 +07:00
|
|
|
.get = ovl_posix_acl_xattr_get,
|
2016-07-29 17:05:24 +07:00
|
|
|
.set = ovl_posix_acl_xattr_set,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct xattr_handler ovl_own_xattr_handler = {
|
|
|
|
.prefix = OVL_XATTR_PREFIX,
|
2016-08-22 22:52:55 +07:00
|
|
|
.get = ovl_own_xattr_get,
|
2016-07-29 17:05:24 +07:00
|
|
|
.set = ovl_own_xattr_set,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct xattr_handler ovl_other_xattr_handler = {
|
|
|
|
.prefix = "", /* catch all */
|
2016-08-22 22:52:55 +07:00
|
|
|
.get = ovl_other_xattr_get,
|
2016-07-29 17:05:24 +07:00
|
|
|
.set = ovl_other_xattr_set,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct xattr_handler *ovl_xattr_handlers[] = {
|
2016-08-22 21:36:49 +07:00
|
|
|
#ifdef CONFIG_FS_POSIX_ACL
|
2016-07-29 17:05:24 +07:00
|
|
|
&ovl_posix_acl_access_xattr_handler,
|
|
|
|
&ovl_posix_acl_default_xattr_handler,
|
2016-08-22 21:36:49 +07:00
|
|
|
#endif
|
2016-07-29 17:05:24 +07:00
|
|
|
&ovl_own_xattr_handler,
|
|
|
|
&ovl_other_xattr_handler,
|
|
|
|
NULL
|
|
|
|
};
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
static int ovl_get_upper(struct ovl_fs *ofs, struct path *upperpath)
|
2017-11-09 16:23:28 +07:00
|
|
|
{
|
2017-11-10 15:39:15 +07:00
|
|
|
struct vfsmount *upper_mnt;
|
2017-11-09 16:23:28 +07:00
|
|
|
int err;
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_mount_dir(ofs->config.upperdir, upperpath);
|
2017-11-09 16:23:28 +07:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* Upper fs should not be r/o */
|
|
|
|
if (sb_rdonly(upperpath->mnt->mnt_sb)) {
|
|
|
|
pr_err("overlayfs: upper fs is r/o, try multi-lower layers mount\n");
|
|
|
|
err = -EINVAL;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_check_namelen(upperpath, ofs, ofs->config.upperdir);
|
2017-11-09 16:23:28 +07:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
err = -EBUSY;
|
|
|
|
if (ovl_inuse_trylock(upperpath->dentry)) {
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->upperdir_locked = true;
|
|
|
|
} else if (ofs->config.index) {
|
2017-11-09 16:23:28 +07:00
|
|
|
pr_err("overlayfs: upperdir is in-use by another mount, mount with '-o index=off' to override exclusive upperdir protection.\n");
|
|
|
|
goto out;
|
|
|
|
} else {
|
|
|
|
pr_warn("overlayfs: upperdir is in-use by another mount, accessing files from both mounts will result in undefined behavior.\n");
|
|
|
|
}
|
2017-11-10 15:39:15 +07:00
|
|
|
|
|
|
|
upper_mnt = clone_private_mount(upperpath);
|
|
|
|
err = PTR_ERR(upper_mnt);
|
|
|
|
if (IS_ERR(upper_mnt)) {
|
|
|
|
pr_err("overlayfs: failed to clone upperpath\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Don't inherit atime flags */
|
|
|
|
upper_mnt->mnt_flags &= ~(MNT_NOATIME | MNT_NODIRATIME | MNT_RELATIME);
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->upper_mnt = upper_mnt;
|
2017-11-09 16:23:28 +07:00
|
|
|
err = 0;
|
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
static int ovl_make_workdir(struct ovl_fs *ofs, struct path *workpath)
|
2017-11-09 16:23:28 +07:00
|
|
|
{
|
2018-01-03 23:54:41 +07:00
|
|
|
struct vfsmount *mnt = ofs->upper_mnt;
|
2017-11-09 16:23:28 +07:00
|
|
|
struct dentry *temp;
|
2017-11-07 18:55:04 +07:00
|
|
|
int fh_type;
|
2017-11-09 16:23:28 +07:00
|
|
|
int err;
|
|
|
|
|
2018-01-03 23:54:41 +07:00
|
|
|
err = mnt_want_write(mnt);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->workdir = ovl_workdir_create(ofs, OVL_WORKDIR_NAME, false);
|
|
|
|
if (!ofs->workdir)
|
2018-01-03 23:54:41 +07:00
|
|
|
goto out;
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Upper should support d_type, else whiteouts are visible. Given
|
|
|
|
* workdir and upper are on same fs, we can do iterate_dir() on
|
|
|
|
* workdir. This check requires successful creation of workdir in
|
|
|
|
* previous step.
|
|
|
|
*/
|
|
|
|
err = ovl_check_d_type_supported(workpath);
|
|
|
|
if (err < 0)
|
2018-01-03 23:54:41 +07:00
|
|
|
goto out;
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* We allowed this configuration and don't want to break users over
|
|
|
|
* kernel upgrade. So warn instead of erroring out.
|
|
|
|
*/
|
|
|
|
if (!err)
|
|
|
|
pr_warn("overlayfs: upper fs needs to support d_type.\n");
|
|
|
|
|
|
|
|
/* Check if upper/work fs supports O_TMPFILE */
|
2017-11-10 15:39:16 +07:00
|
|
|
temp = ovl_do_tmpfile(ofs->workdir, S_IFREG | 0);
|
|
|
|
ofs->tmpfile = !IS_ERR(temp);
|
|
|
|
if (ofs->tmpfile)
|
2017-11-09 16:23:28 +07:00
|
|
|
dput(temp);
|
|
|
|
else
|
|
|
|
pr_warn("overlayfs: upper fs does not support tmpfile.\n");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check if upper/work fs supports trusted.overlay.* xattr
|
|
|
|
*/
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_do_setxattr(ofs->workdir, OVL_XATTR_OPAQUE, "0", 1, 0);
|
2017-11-09 16:23:28 +07:00
|
|
|
if (err) {
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->noxattr = true;
|
2017-09-19 16:14:18 +07:00
|
|
|
ofs->config.index = false;
|
|
|
|
pr_warn("overlayfs: upper fs does not support xattr, falling back to index=off.\n");
|
2018-01-03 23:54:41 +07:00
|
|
|
err = 0;
|
2017-11-09 16:23:28 +07:00
|
|
|
} else {
|
2017-11-10 15:39:16 +07:00
|
|
|
vfs_removexattr(ofs->workdir, OVL_XATTR_OPAQUE);
|
2017-11-09 16:23:28 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
/* Check if upper/work fs supports file handles */
|
2017-11-07 18:55:04 +07:00
|
|
|
fh_type = ovl_can_decode_fh(ofs->workdir->d_sb);
|
|
|
|
if (ofs->config.index && !fh_type) {
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->config.index = false;
|
2017-11-09 16:23:28 +07:00
|
|
|
pr_warn("overlayfs: upper fs does not support file handles, falling back to index=off.\n");
|
|
|
|
}
|
|
|
|
|
2017-11-07 18:55:04 +07:00
|
|
|
/* Check if upper fs has 32bit inode numbers */
|
|
|
|
if (fh_type != FILEID_INO32_GEN)
|
|
|
|
ofs->xino_bits = 0;
|
|
|
|
|
2018-01-19 16:26:53 +07:00
|
|
|
/* NFS export of r/w mount depends on index */
|
|
|
|
if (ofs->config.nfs_export && !ofs->config.index) {
|
|
|
|
pr_warn("overlayfs: NFS export requires \"index=on\", falling back to nfs_export=off.\n");
|
|
|
|
ofs->config.nfs_export = false;
|
|
|
|
}
|
|
|
|
|
2018-01-03 23:54:41 +07:00
|
|
|
out:
|
|
|
|
mnt_drop_write(mnt);
|
|
|
|
return err;
|
2017-11-09 16:23:28 +07:00
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
static int ovl_get_workdir(struct ovl_fs *ofs, struct path *upperpath)
|
2017-11-10 15:39:15 +07:00
|
|
|
{
|
|
|
|
int err;
|
2017-11-10 15:39:15 +07:00
|
|
|
struct path workpath = { };
|
2017-11-10 15:39:15 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_mount_dir(ofs->config.workdir, &workpath);
|
2017-11-10 15:39:15 +07:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
err = -EINVAL;
|
2017-11-10 15:39:15 +07:00
|
|
|
if (upperpath->mnt != workpath.mnt) {
|
2017-11-10 15:39:15 +07:00
|
|
|
pr_err("overlayfs: workdir and upperdir must reside under the same mount\n");
|
|
|
|
goto out;
|
|
|
|
}
|
2017-11-10 15:39:15 +07:00
|
|
|
if (!ovl_workdir_ok(workpath.dentry, upperpath->dentry)) {
|
2017-11-10 15:39:15 +07:00
|
|
|
pr_err("overlayfs: workdir and upperdir must be separate subtrees\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = -EBUSY;
|
2017-11-10 15:39:15 +07:00
|
|
|
if (ovl_inuse_trylock(workpath.dentry)) {
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->workdir_locked = true;
|
|
|
|
} else if (ofs->config.index) {
|
2017-11-10 15:39:15 +07:00
|
|
|
pr_err("overlayfs: workdir is in-use by another mount, mount with '-o index=off' to override exclusive workdir protection.\n");
|
|
|
|
goto out;
|
|
|
|
} else {
|
|
|
|
pr_warn("overlayfs: workdir is in-use by another mount, accessing files from both mounts will result in undefined behavior.\n");
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->workbasedir = dget(workpath.dentry);
|
|
|
|
err = ovl_make_workdir(ofs, &workpath);
|
2017-11-10 15:39:15 +07:00
|
|
|
if (err)
|
|
|
|
goto out;
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
err = 0;
|
|
|
|
out:
|
2017-11-10 15:39:15 +07:00
|
|
|
path_put(&workpath);
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
static int ovl_get_indexdir(struct ovl_fs *ofs, struct ovl_entry *oe,
|
2017-11-09 16:23:29 +07:00
|
|
|
struct path *upperpath)
|
2017-11-09 16:23:28 +07:00
|
|
|
{
|
2018-01-03 23:54:41 +07:00
|
|
|
struct vfsmount *mnt = ofs->upper_mnt;
|
2017-11-09 16:23:28 +07:00
|
|
|
int err;
|
|
|
|
|
2018-01-03 23:54:41 +07:00
|
|
|
err = mnt_want_write(mnt);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
2017-11-09 16:23:28 +07:00
|
|
|
/* Verify lower root is upper root origin */
|
2017-09-24 17:00:19 +07:00
|
|
|
err = ovl_verify_origin(upperpath->dentry, oe->lowerstack[0].dentry,
|
2018-01-11 13:25:32 +07:00
|
|
|
true);
|
2017-11-09 16:23:28 +07:00
|
|
|
if (err) {
|
|
|
|
pr_err("overlayfs: failed to verify upper root origin\n");
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->indexdir = ovl_workdir_create(ofs, OVL_INDEXDIR_NAME, true);
|
|
|
|
if (ofs->indexdir) {
|
2018-01-11 15:47:03 +07:00
|
|
|
/*
|
|
|
|
* Verify upper root is exclusively associated with index dir.
|
|
|
|
* Older kernels stored upper fh in "trusted.overlay.origin"
|
|
|
|
* xattr. If that xattr exists, verify that it is a match to
|
|
|
|
* upper dir file handle. In any case, verify or set xattr
|
|
|
|
* "trusted.overlay.upper" to indicate that index may have
|
|
|
|
* directory entries.
|
|
|
|
*/
|
|
|
|
if (ovl_check_origin_xattr(ofs->indexdir)) {
|
|
|
|
err = ovl_verify_set_fh(ofs->indexdir, OVL_XATTR_ORIGIN,
|
|
|
|
upperpath->dentry, true, false);
|
|
|
|
if (err)
|
|
|
|
pr_err("overlayfs: failed to verify index dir 'origin' xattr\n");
|
|
|
|
}
|
|
|
|
err = ovl_verify_upper(ofs->indexdir, upperpath->dentry, true);
|
2017-11-09 16:23:28 +07:00
|
|
|
if (err)
|
2018-01-11 15:47:03 +07:00
|
|
|
pr_err("overlayfs: failed to verify index dir 'upper' xattr\n");
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
/* Cleanup bad/stale/orphan index entries */
|
|
|
|
if (!err)
|
2017-12-13 03:40:46 +07:00
|
|
|
err = ovl_indexdir_cleanup(ofs);
|
2017-11-09 16:23:28 +07:00
|
|
|
}
|
2017-11-10 15:39:16 +07:00
|
|
|
if (err || !ofs->indexdir)
|
2017-11-09 16:23:28 +07:00
|
|
|
pr_warn("overlayfs: try deleting index dir or mounting with '-o index=off' to disable inodes index.\n");
|
|
|
|
|
|
|
|
out:
|
2018-01-03 23:54:41 +07:00
|
|
|
mnt_drop_write(mnt);
|
2017-11-09 16:23:28 +07:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2018-03-29 00:22:41 +07:00
|
|
|
/* Get a unique fsid for the layer */
|
|
|
|
static int ovl_get_fsid(struct ovl_fs *ofs, struct super_block *sb)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
dev_t dev;
|
|
|
|
int err;
|
|
|
|
|
|
|
|
/* fsid 0 is reserved for upper fs even with non upper overlay */
|
|
|
|
if (ofs->upper_mnt && ofs->upper_mnt->mnt_sb == sb)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
for (i = 0; i < ofs->numlowerfs; i++) {
|
|
|
|
if (ofs->lower_fs[i].sb == sb)
|
|
|
|
return i + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = get_anon_bdev(&dev);
|
|
|
|
if (err) {
|
|
|
|
pr_err("overlayfs: failed to get anonymous bdev for lowerpath\n");
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
ofs->lower_fs[ofs->numlowerfs].sb = sb;
|
|
|
|
ofs->lower_fs[ofs->numlowerfs].pseudo_dev = dev;
|
|
|
|
ofs->numlowerfs++;
|
|
|
|
|
|
|
|
return ofs->numlowerfs;
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
static int ovl_get_lower_layers(struct ovl_fs *ofs, struct path *stack,
|
2017-11-10 15:39:15 +07:00
|
|
|
unsigned int numlower)
|
|
|
|
{
|
|
|
|
int err;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
err = -ENOMEM;
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->lower_layers = kcalloc(numlower, sizeof(struct ovl_layer),
|
2017-11-10 15:39:15 +07:00
|
|
|
GFP_KERNEL);
|
2017-11-10 15:39:16 +07:00
|
|
|
if (ofs->lower_layers == NULL)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out;
|
2018-03-29 00:22:41 +07:00
|
|
|
|
|
|
|
ofs->lower_fs = kcalloc(numlower, sizeof(struct ovl_sb),
|
|
|
|
GFP_KERNEL);
|
|
|
|
if (ofs->lower_fs == NULL)
|
|
|
|
goto out;
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
for (i = 0; i < numlower; i++) {
|
|
|
|
struct vfsmount *mnt;
|
2018-03-29 00:22:41 +07:00
|
|
|
int fsid;
|
2017-11-10 15:39:15 +07:00
|
|
|
|
2018-03-29 00:22:41 +07:00
|
|
|
err = fsid = ovl_get_fsid(ofs, stack[i].mnt->mnt_sb);
|
|
|
|
if (err < 0)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out;
|
|
|
|
|
|
|
|
mnt = clone_private_mount(&stack[i]);
|
|
|
|
err = PTR_ERR(mnt);
|
|
|
|
if (IS_ERR(mnt)) {
|
|
|
|
pr_err("overlayfs: failed to clone lowerpath\n");
|
|
|
|
goto out;
|
|
|
|
}
|
2018-03-29 00:22:41 +07:00
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
/*
|
|
|
|
* Make lower layers R/O. That way fchmod/fchown on lower file
|
|
|
|
* will fail instead of modifying lower fs.
|
|
|
|
*/
|
|
|
|
mnt->mnt_flags |= MNT_READONLY | MNT_NOATIME;
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->lower_layers[ofs->numlower].mnt = mnt;
|
2017-11-09 00:23:36 +07:00
|
|
|
ofs->lower_layers[ofs->numlower].idx = i + 1;
|
2018-03-29 00:22:41 +07:00
|
|
|
ofs->lower_layers[ofs->numlower].fsid = fsid;
|
|
|
|
if (fsid) {
|
|
|
|
ofs->lower_layers[ofs->numlower].fs =
|
|
|
|
&ofs->lower_fs[fsid - 1];
|
|
|
|
}
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->numlower++;
|
2017-11-10 15:39:15 +07:00
|
|
|
}
|
2017-11-07 18:55:04 +07:00
|
|
|
|
|
|
|
/* When all layers on same fs, overlay can use real inode numbers */
|
|
|
|
if (!ofs->numlowerfs || (ofs->numlowerfs == 1 && !ofs->upper_mnt))
|
|
|
|
ofs->xino_bits = 0;
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
err = 0;
|
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
static struct ovl_entry *ovl_get_lowerstack(struct super_block *sb,
|
2017-11-10 15:39:16 +07:00
|
|
|
struct ovl_fs *ofs)
|
2017-11-09 16:23:28 +07:00
|
|
|
{
|
|
|
|
int err;
|
|
|
|
char *lowertmp, *lower;
|
2017-11-10 15:39:15 +07:00
|
|
|
struct path *stack = NULL;
|
|
|
|
unsigned int stacklen, numlower = 0, i;
|
2017-11-09 16:23:28 +07:00
|
|
|
bool remote = false;
|
2017-11-10 15:39:15 +07:00
|
|
|
struct ovl_entry *oe;
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
err = -ENOMEM;
|
2017-11-10 15:39:16 +07:00
|
|
|
lowertmp = kstrdup(ofs->config.lowerdir, GFP_KERNEL);
|
2017-11-09 16:23:28 +07:00
|
|
|
if (!lowertmp)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
err = -EINVAL;
|
|
|
|
stacklen = ovl_split_lowerdirs(lowertmp);
|
|
|
|
if (stacklen > OVL_MAX_STACK) {
|
|
|
|
pr_err("overlayfs: too many lower directories, limit is %d\n",
|
|
|
|
OVL_MAX_STACK);
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2017-11-10 15:39:16 +07:00
|
|
|
} else if (!ofs->config.upperdir && stacklen == 1) {
|
2017-11-09 16:23:28 +07:00
|
|
|
pr_err("overlayfs: at least 2 lowerdir are needed while upperdir nonexistent\n");
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2018-01-19 16:26:53 +07:00
|
|
|
} else if (!ofs->config.upperdir && ofs->config.nfs_export &&
|
|
|
|
ofs->config.redirect_follow) {
|
|
|
|
pr_warn("overlayfs: NFS export requires \"redirect_dir=nofollow\" on non-upper mount, falling back to nfs_export=off.\n");
|
|
|
|
ofs->config.nfs_export = false;
|
2017-11-09 16:23:28 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
err = -ENOMEM;
|
|
|
|
stack = kcalloc(stacklen, sizeof(struct path), GFP_KERNEL);
|
|
|
|
if (!stack)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
err = -EINVAL;
|
|
|
|
lower = lowertmp;
|
|
|
|
for (numlower = 0; numlower < stacklen; numlower++) {
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_lower_dir(lower, &stack[numlower], ofs,
|
2017-11-09 16:23:28 +07:00
|
|
|
&sb->s_stack_depth, &remote);
|
|
|
|
if (err)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
lower = strchr(lower, '\0') + 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = -EINVAL;
|
|
|
|
sb->s_stack_depth++;
|
|
|
|
if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) {
|
|
|
|
pr_err("overlayfs: maximum fs stacking depth exceeded\n");
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2017-11-09 16:23:28 +07:00
|
|
|
}
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_get_lower_layers(ofs, stack, numlower);
|
2017-11-10 15:39:15 +07:00
|
|
|
if (err)
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
err = -ENOMEM;
|
|
|
|
oe = ovl_alloc_entry(numlower);
|
|
|
|
if (!oe)
|
|
|
|
goto out_err;
|
|
|
|
|
|
|
|
for (i = 0; i < numlower; i++) {
|
|
|
|
oe->lowerstack[i].dentry = dget(stack[i].dentry);
|
2017-11-10 15:39:16 +07:00
|
|
|
oe->lowerstack[i].layer = &ofs->lower_layers[i];
|
2017-11-10 15:39:15 +07:00
|
|
|
}
|
2017-11-09 16:23:28 +07:00
|
|
|
|
|
|
|
if (remote)
|
|
|
|
sb->s_d_op = &ovl_reval_dentry_operations;
|
|
|
|
else
|
|
|
|
sb->s_d_op = &ovl_dentry_operations;
|
|
|
|
|
|
|
|
out:
|
|
|
|
for (i = 0; i < numlower; i++)
|
|
|
|
path_put(&stack[i]);
|
|
|
|
kfree(stack);
|
2017-11-10 15:39:15 +07:00
|
|
|
kfree(lowertmp);
|
|
|
|
|
|
|
|
return oe;
|
|
|
|
|
|
|
|
out_err:
|
|
|
|
oe = ERR_PTR(err);
|
2017-11-09 16:23:28 +07:00
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
static int ovl_fill_super(struct super_block *sb, void *data, int silent)
|
|
|
|
{
|
2017-03-30 04:02:19 +07:00
|
|
|
struct path upperpath = { };
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
struct dentry *root_dentry;
|
2017-11-10 15:39:15 +07:00
|
|
|
struct ovl_entry *oe;
|
2017-11-10 15:39:16 +07:00
|
|
|
struct ovl_fs *ofs;
|
2017-01-11 01:30:21 +07:00
|
|
|
struct cred *cred;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
int err;
|
|
|
|
|
2014-10-24 05:14:38 +07:00
|
|
|
err = -ENOMEM;
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs = kzalloc(sizeof(struct ovl_fs), GFP_KERNEL);
|
|
|
|
if (!ofs)
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
goto out;
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->creator_cred = cred = prepare_creds();
|
2017-11-10 15:39:15 +07:00
|
|
|
if (!cred)
|
|
|
|
goto out_err;
|
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->config.index = ovl_index_def;
|
2018-01-19 16:26:53 +07:00
|
|
|
ofs->config.nfs_export = ovl_nfs_export_def;
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_parse_opt((char *) data, &ofs->config);
|
2014-10-24 05:14:38 +07:00
|
|
|
if (err)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2014-10-24 05:14:38 +07:00
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
err = -EINVAL;
|
2017-11-10 15:39:16 +07:00
|
|
|
if (!ofs->config.lowerdir) {
|
2015-06-30 00:18:56 +07:00
|
|
|
if (!silent)
|
|
|
|
pr_err("overlayfs: missing 'lowerdir'\n");
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
}
|
|
|
|
|
2014-12-13 06:59:51 +07:00
|
|
|
sb->s_stack_depth = 0;
|
2015-12-11 22:30:49 +07:00
|
|
|
sb->s_maxbytes = MAX_LFS_FILESIZE;
|
2017-11-07 18:55:04 +07:00
|
|
|
/* Assume underlaying fs uses 32bit inodes unless proven otherwise */
|
|
|
|
ofs->xino_bits = BITS_PER_LONG - 32;
|
2017-11-10 15:39:16 +07:00
|
|
|
if (ofs->config.upperdir) {
|
|
|
|
if (!ofs->config.workdir) {
|
2014-12-13 06:59:51 +07:00
|
|
|
pr_err("overlayfs: missing 'workdir'\n");
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2014-12-13 06:59:51 +07:00
|
|
|
}
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_get_upper(ofs, &upperpath);
|
2014-12-13 06:59:51 +07:00
|
|
|
if (err)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2017-06-21 19:28:33 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
err = ovl_get_workdir(ofs, &upperpath);
|
2017-11-09 16:23:28 +07:00
|
|
|
if (err)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
2017-11-10 15:39:15 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
if (!ofs->workdir)
|
2017-11-28 04:05:09 +07:00
|
|
|
sb->s_flags |= SB_RDONLY;
|
2017-11-10 15:39:15 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
sb->s_stack_depth = ofs->upper_mnt->mnt_sb->s_stack_depth;
|
|
|
|
sb->s_time_gran = ofs->upper_mnt->mnt_sb->s_time_gran;
|
2017-11-10 15:39:15 +07:00
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
}
|
2017-11-10 15:39:16 +07:00
|
|
|
oe = ovl_get_lowerstack(sb, ofs);
|
2017-11-10 15:39:15 +07:00
|
|
|
err = PTR_ERR(oe);
|
|
|
|
if (IS_ERR(oe))
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_err;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2015-01-15 12:20:57 +07:00
|
|
|
/* If the upper fs is nonexistent, we mark overlayfs r/o too */
|
2017-11-10 15:39:16 +07:00
|
|
|
if (!ofs->upper_mnt)
|
2017-11-28 04:05:09 +07:00
|
|
|
sb->s_flags |= SB_RDONLY;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-11-10 15:39:16 +07:00
|
|
|
if (!(ovl_force_readonly(ofs)) && ofs->config.index) {
|
|
|
|
err = ovl_get_indexdir(ofs, oe, &upperpath);
|
2017-06-21 19:28:38 +07:00
|
|
|
if (err)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_free_oe;
|
2017-11-10 15:39:15 +07:00
|
|
|
|
2017-09-19 16:14:18 +07:00
|
|
|
/* Force r/o mount with no index dir */
|
|
|
|
if (!ofs->indexdir) {
|
|
|
|
dput(ofs->workdir);
|
|
|
|
ofs->workdir = NULL;
|
2017-11-28 04:05:09 +07:00
|
|
|
sb->s_flags |= SB_RDONLY;
|
2017-09-19 16:14:18 +07:00
|
|
|
}
|
|
|
|
|
2017-06-21 19:28:36 +07:00
|
|
|
}
|
|
|
|
|
2017-09-19 16:14:18 +07:00
|
|
|
/* Show index=off in /proc/mounts for forced r/o mount */
|
2018-01-19 16:26:53 +07:00
|
|
|
if (!ofs->indexdir) {
|
2017-11-10 15:39:16 +07:00
|
|
|
ofs->config.index = false;
|
2018-01-19 16:26:53 +07:00
|
|
|
if (ofs->upper_mnt && ofs->config.nfs_export) {
|
|
|
|
pr_warn("overlayfs: NFS export requires an index dir, falling back to nfs_export=off.\n");
|
|
|
|
ofs->config.nfs_export = false;
|
|
|
|
}
|
|
|
|
}
|
2017-06-21 19:28:36 +07:00
|
|
|
|
2017-10-02 15:31:42 +07:00
|
|
|
if (ofs->config.nfs_export)
|
|
|
|
sb->s_export_op = &ovl_export_operations;
|
|
|
|
|
2017-01-11 01:30:21 +07:00
|
|
|
/* Never override disk quota limits or use reserved space */
|
|
|
|
cap_lower(cred->cap_effective, CAP_SYS_RESOURCE);
|
|
|
|
|
2016-10-14 08:03:36 +07:00
|
|
|
sb->s_magic = OVERLAYFS_SUPER_MAGIC;
|
|
|
|
sb->s_op = &ovl_super_operations;
|
|
|
|
sb->s_xattr = ovl_xattr_handlers;
|
2017-11-10 15:39:16 +07:00
|
|
|
sb->s_fs_info = ofs;
|
2017-11-28 04:05:09 +07:00
|
|
|
sb->s_flags |= SB_POSIXACL | SB_NOREMOTELOCK;
|
2016-10-14 08:03:36 +07:00
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
err = -ENOMEM;
|
2016-12-16 17:02:55 +07:00
|
|
|
root_dentry = d_make_root(ovl_new_inode(sb, S_IFDIR, 0));
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
if (!root_dentry)
|
2017-11-10 15:39:15 +07:00
|
|
|
goto out_free_oe;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2018-01-15 00:25:31 +07:00
|
|
|
root_dentry->d_fsdata = oe;
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
mntput(upperpath.mnt);
|
2017-05-24 19:29:33 +07:00
|
|
|
if (upperpath.dentry) {
|
2018-01-15 00:25:31 +07:00
|
|
|
ovl_dentry_set_upper_alias(root_dentry);
|
2017-07-05 03:03:16 +07:00
|
|
|
if (ovl_is_impuredir(upperpath.dentry))
|
|
|
|
ovl_set_flag(OVL_IMPURE, d_inode(root_dentry));
|
2017-05-24 19:29:33 +07:00
|
|
|
}
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-06-25 20:37:17 +07:00
|
|
|
/* Root is always merge -> can have whiteouts */
|
|
|
|
ovl_set_flag(OVL_WHITEOUTS, d_inode(root_dentry));
|
ovl: check lower ancestry on encode of lower dir file handle
This change relaxes copy up on encode of merge dir with lower layer > 1
and handles the case of encoding a merge dir with lower layer 1, where an
ancestor is a non-indexed merge dir. In that case, decode of the lower
file handle will not have been possible if the non-indexed ancestor is
redirected before or after encode.
Before encoding a non-upper directory file handle from real layer N, we
need to check if it will be possible to reconnect an overlay dentry from
the real lower decoded dentry. This is done by following the overlay
ancestry up to a "layer N connected" ancestor and verifying that all
parents along the way are "layer N connectable". If an ancestor that is
NOT "layer N connectable" is found, we need to copy up an ancestor, which
is "layer N connectable", thus making that ancestor "layer N connected".
For example:
layer 1: /a
layer 2: /a/b/c
The overlay dentry /a is NOT "layer 2 connectable", because if dir /a is
copied up and renamed, upper dir /a will be indexed by lower dir /a from
layer 1. The dir /a from layer 2 will never be indexed, so the algorithm
in ovl_lookup_real_ancestor() (*) will not be able to lookup a connected
overlay dentry from the connected lower dentry /a/b/c.
To avoid this problem on decode time, we need to copy up an ancestor of
/a/b/c, which is "layer 2 connectable", on encode time. That ancestor is
/a/b. After copy up (and index) of /a/b, it will become "layer 2 connected"
and when the time comes to decode the file handle from lower dentry /a/b/c,
ovl_lookup_real_ancestor() will find the indexed ancestor /a/b and decoding
a connected overlay dentry will be accomplished.
(*) the algorithm in ovl_lookup_real_ancestor() can be improved to lookup
an entry /a in the lower layers above layer N and find the indexed dir /a
from layer 1. If that improvement is made, then the check for "layer N
connected" will need to verify there are no redirects in lower layers above
layer N. In the example above, /a will be "layer 2 connectable". However,
if layer 2 dir /a is a target of a layer 1 redirect, then /a will NOT be
"layer 2 connectable":
layer 1: /A (redirect = /a)
layer 2: /a/b/c
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-01-30 18:31:09 +07:00
|
|
|
ovl_dentry_set_flag(OVL_E_CONNECTED, root_dentry);
|
2017-07-05 03:03:16 +07:00
|
|
|
ovl_inode_init(d_inode(root_dentry), upperpath.dentry,
|
|
|
|
ovl_dentry_lower(root_dentry));
|
2015-12-09 22:11:59 +07:00
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
sb->s_root = root_dentry;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
2017-11-10 15:39:15 +07:00
|
|
|
out_free_oe:
|
|
|
|
ovl_entry_stack_free(oe);
|
2017-07-24 13:57:54 +07:00
|
|
|
kfree(oe);
|
2017-11-10 15:39:15 +07:00
|
|
|
out_err:
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
path_put(&upperpath);
|
2017-11-10 15:39:16 +07:00
|
|
|
ovl_free_fs(ofs);
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
out:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct dentry *ovl_mount(struct file_system_type *fs_type, int flags,
|
|
|
|
const char *dev_name, void *raw_data)
|
|
|
|
{
|
|
|
|
return mount_nodev(fs_type, flags, raw_data, ovl_fill_super);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct file_system_type ovl_fs_type = {
|
|
|
|
.owner = THIS_MODULE,
|
2014-11-20 22:39:59 +07:00
|
|
|
.name = "overlay",
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
.mount = ovl_mount,
|
|
|
|
.kill_sb = kill_anon_super,
|
|
|
|
};
|
2014-11-20 22:39:59 +07:00
|
|
|
MODULE_ALIAS_FS("overlay");
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
|
2017-06-12 13:54:40 +07:00
|
|
|
static void ovl_inode_init_once(void *foo)
|
|
|
|
{
|
|
|
|
struct ovl_inode *oi = foo;
|
|
|
|
|
|
|
|
inode_init_once(&oi->vfs_inode);
|
|
|
|
}
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
static int __init ovl_init(void)
|
|
|
|
{
|
2017-06-12 13:54:40 +07:00
|
|
|
int err;
|
|
|
|
|
|
|
|
ovl_inode_cachep = kmem_cache_create("ovl_inode",
|
|
|
|
sizeof(struct ovl_inode), 0,
|
|
|
|
(SLAB_RECLAIM_ACCOUNT|
|
|
|
|
SLAB_MEM_SPREAD|SLAB_ACCOUNT),
|
|
|
|
ovl_inode_init_once);
|
|
|
|
if (ovl_inode_cachep == NULL)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
err = register_filesystem(&ovl_fs_type);
|
|
|
|
if (err)
|
|
|
|
kmem_cache_destroy(ovl_inode_cachep);
|
|
|
|
|
|
|
|
return err;
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
static void __exit ovl_exit(void)
|
|
|
|
{
|
|
|
|
unregister_filesystem(&ovl_fs_type);
|
2017-06-12 13:54:40 +07:00
|
|
|
|
|
|
|
/*
|
|
|
|
* Make sure all delayed rcu free inodes are flushed before we
|
|
|
|
* destroy cache.
|
|
|
|
*/
|
|
|
|
rcu_barrier();
|
|
|
|
kmem_cache_destroy(ovl_inode_cachep);
|
|
|
|
|
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2014-10-24 05:14:38 +07:00
|
|
|
}
|
|
|
|
|
|
|
|
module_init(ovl_init);
|
|
|
|
module_exit(ovl_exit);
|