AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-16 00:36:40 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
ac48653cec
linux_dsm_epyc7002/drivers/mmc/core/mmc.c

1576 lines
40 KiB
C
Raw Normal View History

mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
mmc: update header file paths Make sure all headers in the files reflect their true position in the tree. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-12 01:04:50 +07:00
* linux/drivers/mmc/core/mmc.c
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
*
* Copyright (C) 2003-2004 Russell King, All Rights Reserved.
* Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved.
* MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/err.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 15:04:11 +07:00
#include <linux/slab.h>
mmc: Fix implicit use of stat.h header in associated files Once the implicit use of module.h is prevented, these files will fail to find the stat.h header content. Fix up the implicit usage expectations in advance of the cleanup. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-07-15 23:01:27 +07:00
#include <linux/stat.h>
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include "core.h"
mmc: refactor bus operations Move bus operations to its own file for the sake of clarity. Also delegate sysfs attributes to bus handlers in preparation for other more exotic types. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-19 18:39:01 +07:00
#include "bus.h"
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
#include "mmc_ops.h"
mmc: core: add support for eMMC Dual Data Rate eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-13 12:47:18 +07:00
#include "sd_ops.h"
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
static const unsigned int tran_exp[] = {
10000, 100000, 1000000, 10000000,
0, 0, 0, 0
};
static const unsigned char tran_mant[] = {
0, 10, 12, 13, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 70, 80,
};
static const unsigned int tacc_exp[] = {
1, 10, 100, 1000, 10000, 100000, 1000000, 10000000,
};
static const unsigned int tacc_mant[] = {
0, 10, 12, 13, 15, 20, 25, 30,
35, 40, 45, 50, 55, 60, 70, 80,
};
#define UNSTUFF_BITS(resp,start,size) \
({ \
const int __size = size; \
const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1; \
const int __off = 3 - ((start) / 32); \
const int __shft = (start) & 31; \
u32 __res; \
\
__res = resp[__off] >> __shft; \
if (__size + __shft > 32) \
__res |= resp[__off-1] << ((32 - __shft) % 32); \
__res & __mask; \
})
/*
* Given the decoded CSD structure, decode the raw CID to our CID structure.
*/
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
static int mmc_decode_cid(struct mmc_card *card)
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
{
u32 *resp = card->raw_cid;
/*
* The selection of the format here is based upon published
* specs from sandisk and from what people have reported.
*/
switch (card->csd.mmca_vsn) {
case 0: /* MMC v1.0 - v1.2 */
case 1: /* MMC v1.4 */
card->cid.manfid = UNSTUFF_BITS(resp, 104, 24);
card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8);
card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8);
card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8);
card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8);
card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8);
card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8);
card->cid.prod_name[6] = UNSTUFF_BITS(resp, 48, 8);
card->cid.hwrev = UNSTUFF_BITS(resp, 44, 4);
card->cid.fwrev = UNSTUFF_BITS(resp, 40, 4);
card->cid.serial = UNSTUFF_BITS(resp, 16, 24);
card->cid.month = UNSTUFF_BITS(resp, 12, 4);
card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997;
break;
case 2: /* MMC v2.0 - v2.2 */
case 3: /* MMC v3.1 - v3.3 */
case 4: /* MMC v4 */
card->cid.manfid = UNSTUFF_BITS(resp, 120, 8);
card->cid.oemid = UNSTUFF_BITS(resp, 104, 16);
card->cid.prod_name[0] = UNSTUFF_BITS(resp, 96, 8);
card->cid.prod_name[1] = UNSTUFF_BITS(resp, 88, 8);
card->cid.prod_name[2] = UNSTUFF_BITS(resp, 80, 8);
card->cid.prod_name[3] = UNSTUFF_BITS(resp, 72, 8);
card->cid.prod_name[4] = UNSTUFF_BITS(resp, 64, 8);
card->cid.prod_name[5] = UNSTUFF_BITS(resp, 56, 8);
card->cid.serial = UNSTUFF_BITS(resp, 16, 32);
card->cid.month = UNSTUFF_BITS(resp, 12, 4);
card->cid.year = UNSTUFF_BITS(resp, 8, 4) + 1997;
break;
default:
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_err("%s: card has unknown MMCA version %d\n",
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc_hostname(card->host), card->csd.mmca_vsn);
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
return -EINVAL;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
}
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
return 0;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
}
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
static void mmc_set_erase_size(struct mmc_card *card)
{
if (card->ext_csd.erase_group_def & 1)
card->erase_size = card->ext_csd.hc_erase_size;
else
card->erase_size = card->csd.erase_size;
mmc_init_erase(card);
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
* Given a 128-bit response, decode to our card CSD structure.
*/
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
static int mmc_decode_csd(struct mmc_card *card)
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
{
struct mmc_csd *csd = &card->csd;
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
unsigned int e, m, a, b;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
u32 *resp = card->raw_csd;
/*
* We only understand CSD structure v1.1 and v1.2.
* v1.2 has extra information in bits 15, 11 and 10.
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
* We also support eMMC v4.4 & v4.41.
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
*/
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
csd->structure = UNSTUFF_BITS(resp, 126, 2);
if (csd->structure == 0) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_err("%s: unrecognised CSD structure version %d\n",
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
mmc_hostname(card->host), csd->structure);
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
return -EINVAL;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
}
csd->mmca_vsn = UNSTUFF_BITS(resp, 122, 4);
m = UNSTUFF_BITS(resp, 115, 4);
e = UNSTUFF_BITS(resp, 112, 3);
csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10;
csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100;
m = UNSTUFF_BITS(resp, 99, 4);
e = UNSTUFF_BITS(resp, 96, 3);
csd->max_dtr = tran_exp[e] * tran_mant[m];
csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
e = UNSTUFF_BITS(resp, 47, 3);
m = UNSTUFF_BITS(resp, 62, 12);
csd->capacity = (1 + m) << (e + 2);
csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4);
csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
if (csd->write_blkbits >= 9) {
a = UNSTUFF_BITS(resp, 42, 5);
b = UNSTUFF_BITS(resp, 37, 5);
csd->erase_size = (a + 1) * (b + 1);
csd->erase_size <<= csd->write_blkbits - 9;
}
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
return 0;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
}
/*
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
* Read extended CSD.
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
*/
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
{
int err;
u8 *ext_csd;
BUG_ON(!card);
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
BUG_ON(!new_ext_csd);
*new_ext_csd = NULL;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
return 0;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
* As the ext_csd is so large and mostly unused, we don't store the
* raw block in mmc_card.
*/
ext_csd = kmalloc(512, GFP_KERNEL);
if (!ext_csd) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_err("%s: could not allocate a buffer to "
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
"receive the ext_csd.\n", mmc_hostname(card->host));
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
return -ENOMEM;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
}
err = mmc_send_ext_csd(card, ext_csd);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
if (err) {
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
kfree(ext_csd);
*new_ext_csd = NULL;
mmc_spi: fail gracefully if host or card do not support the switch command Some time ago, I have send a patch to the mmc_spi subsystem changing the error codes. This was after a discussion with Pierre about using EINVAL only for non-recoverable errors. This patch was accepted as http://git.kernel.org/linus/fdd858db7113ca64132de390188d7ca00701013d Unfortunately, several weeks later, I realized that this patch has opened a little can of worms because there are SD cards on the market which a) claim that they support the switch command AND b) refuse to execute this command if operating in SPI mode. So, such a card would get unusuable in an embedded linux system in SPI mode, because the init sequence terminates with an error. This patch adds the missing error codes to the caller of the switch command and restores the old behaviour to fail gracefully if these commands can not execute. Signed-off-by: Wolfgang Muees <wolfgang.mues@auerswald.de> Cc: <linux-mmc@vger.kernel.org> Cc: <stable@kernel.org> [2.6.31.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:26 +07:00
/* If the host or the card can't do the switch,
* fail more gracefully. */
if ((err != -EINVAL)
&& (err != -ENOSYS)
&& (err != -EFAULT))
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
return err;
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
* High capacity cards should have this "magic" size
* stored in their CSD.
*/
if (card->csd.capacity == (4096 * 512)) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_err("%s: unable to read EXT_CSD "
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
"on a possible high capacity card. "
"Card will be ignored.\n",
mmc_hostname(card->host));
} else {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_warning("%s: unable to read "
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
"EXT_CSD, performance might "
"suffer.\n",
mmc_hostname(card->host));
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
err = 0;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
}
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
} else
*new_ext_csd = ext_csd;
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
return err;
}
mmc: core: fix the decision of HS200/DDR card-type Current implementation decides the card type exclusively. Even though eMMC device can support both HS200 and DDR mode, card type will be set only for HS200. If the host doesn't support HS200 but has DDR capability, then DDR mode can't be selected. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-25 14:17:37 +07:00
static void mmc_select_card_type(struct mmc_card *card)
{
struct mmc_host *host = card->host;
u8 card_type = card->ext_csd.raw_card_type & EXT_CSD_CARD_TYPE_MASK;
mmc: Standardise capability type There are discrepancies with regards to how MMC capabilities are carried throughout the subsystem. Let's standardise them to eliminate any confusion. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-14 19:35:51 +07:00
u32 caps = host->caps, caps2 = host->caps2;
mmc: core: fix the decision of HS200/DDR card-type Current implementation decides the card type exclusively. Even though eMMC device can support both HS200 and DDR mode, card type will be set only for HS200. If the host doesn't support HS200 but has DDR capability, then DDR mode can't be selected. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-25 14:17:37 +07:00
unsigned int hs_max_dtr = 0;
if (card_type & EXT_CSD_CARD_TYPE_26)
hs_max_dtr = MMC_HIGH_26_MAX_DTR;
if (caps & MMC_CAP_MMC_HIGHSPEED &&
card_type & EXT_CSD_CARD_TYPE_52)
hs_max_dtr = MMC_HIGH_52_MAX_DTR;
if ((caps & MMC_CAP_1_8V_DDR &&
card_type & EXT_CSD_CARD_TYPE_DDR_1_8V) ||
(caps & MMC_CAP_1_2V_DDR &&
card_type & EXT_CSD_CARD_TYPE_DDR_1_2V))
hs_max_dtr = MMC_HIGH_DDR_MAX_DTR;
if ((caps2 & MMC_CAP2_HS200_1_8V_SDR &&
card_type & EXT_CSD_CARD_TYPE_SDR_1_8V) ||
(caps2 & MMC_CAP2_HS200_1_2V_SDR &&
card_type & EXT_CSD_CARD_TYPE_SDR_1_2V))
hs_max_dtr = MMC_HS200_MAX_DTR;
card->ext_csd.hs_max_dtr = hs_max_dtr;
card->ext_csd.card_type = card_type;
}
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
/*
* Decode extended CSD.
*/
static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
{
mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-06 21:41:38 +07:00
int err = 0, idx;
unsigned int part_size;
u8 hc_erase_grp_sz = 0, hc_wp_grp_sz = 0;
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
BUG_ON(!card);
if (!ext_csd)
return 0;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
if (card->csd.structure == 3) {
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
if (card->ext_csd.raw_ext_csd_structure > 2) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_err("%s: unrecognised EXT_CSD structure "
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
"version %d\n", mmc_hostname(card->host),
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
card->ext_csd.raw_ext_csd_structure);
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
err = -EINVAL;
goto out;
}
}
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
card->ext_csd.rev = ext_csd[EXT_CSD_REV];
mmc: core: Detect eMMC v4.5 ext_csd entries The eMMC v4.5 Spec is released now: EXT_CSD_REV Extended CSD Revision 255-7 Reserved 6 Revision 1.6 (for MMC v4.5) 5 Revision 1.5 (for MMV v4.41) ... Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-26 15:12:37 +07:00
if (card->ext_csd.rev > 6) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_err("%s: unrecognised EXT_CSD revision %d\n",
mmc: recognize CSD structure The eMMC spec 4.4 and 4.3 + additional feature chips has CSD structure version 3 and version 3 have to check the CSD_STRUCTURE byte in the EXT_CSD register. Also fix EXT_CSD revision message. [akpm@linux-foundation.org: fix comment, per Chris Ball] Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Chris Ball <cjb@laptop.org> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:36 +07:00
mmc_hostname(card->host), card->ext_csd.rev);
mmc: possible leak in mmc_read_ext_csd The exception path associated with an invalid ext_csd_struct returns without freeing ext_csd. Coverity CID 1909. Signed-off-by: Florin Malita Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-10-13 23:27:20 +07:00
err = -EINVAL;
goto out;
mmc: read ext_csd version number Make sure we do not try to parse a structure we do not understand. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 05:34:07 +07:00
}
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0];
card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1];
card->ext_csd.raw_sectors[2] = ext_csd[EXT_CSD_SEC_CNT + 2];
card->ext_csd.raw_sectors[3] = ext_csd[EXT_CSD_SEC_CNT + 3];
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
if (card->ext_csd.rev >= 2) {
mmc: read ext_csd version number Make sure we do not try to parse a structure we do not understand. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 05:34:07 +07:00
card->ext_csd.sectors =
ext_csd[EXT_CSD_SEC_CNT + 0] << 0 |
ext_csd[EXT_CSD_SEC_CNT + 1] << 8 |
ext_csd[EXT_CSD_SEC_CNT + 2] << 16 |
ext_csd[EXT_CSD_SEC_CNT + 3] << 24;
mmc: only set blockaddressed for > 2GiB cards A non-zero value of SEC_COUNT does not indicate that the card is sector addressed. According to the MMC specification, cards with a density greater than 2GiB are sector addressed. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-11 08:01:45 +07:00
/* Cards with density > 2GiB are sector addressed */
if (card->ext_csd.sectors > (2u * 1024 * 1024 * 1024) / 512)
mmc: read ext_csd version number Make sure we do not try to parse a structure we do not understand. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 05:34:07 +07:00
mmc_card_set_blockaddr(card);
}
mmc: core: fix the decision of HS200/DDR card-type Current implementation decides the card type exclusively. Even though eMMC device can support both HS200 and DDR mode, card type will be set only for HS200. If the host doesn't support HS200 but has DDR capability, then DDR mode can't be selected. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-25 14:17:37 +07:00
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
card->ext_csd.raw_card_type = ext_csd[EXT_CSD_CARD_TYPE];
mmc: core: fix the decision of HS200/DDR card-type Current implementation decides the card type exclusively. Even though eMMC device can support both HS200 and DDR mode, card type will be set only for HS200. If the host doesn't support HS200 but has DDR capability, then DDR mode can't be selected. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-25 14:17:37 +07:00
mmc_select_card_type(card);
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
card->ext_csd.raw_s_a_timeout = ext_csd[EXT_CSD_S_A_TIMEOUT];
card->ext_csd.raw_erase_timeout_mult =
ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
card->ext_csd.raw_hc_erase_grp_size =
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
if (card->ext_csd.rev >= 3) {
u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT];
mmc: MMC boot partitions support. Allows device MMC boot partitions to be accessed. MMC partitions are treated effectively as separate block devices on the same MMC card. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-12 06:10:25 +07:00
card->ext_csd.part_config = ext_csd[EXT_CSD_PART_CONFIG];
/* EXT_CSD value is in units of 10ms, but we store in ms */
card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME];
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
/* Sleep / awake timeout in 100ns units */
if (sa_shift > 0 && sa_shift <= 0x17)
card->ext_csd.sa_timeout =
1 << ext_csd[EXT_CSD_S_A_TIMEOUT];
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
card->ext_csd.erase_group_def =
ext_csd[EXT_CSD_ERASE_GROUP_DEF];
card->ext_csd.hc_erase_timeout = 300 *
ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT];
card->ext_csd.hc_erase_size =
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] << 10;
mmc: Reliable write support. Allows reliable writes to be used for MMC writes. Reliable writes are used to service write REQ_FUA/REQ_META requests. Handles both the legacy and the enhanced reliable write support in MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-01 06:40:00 +07:00
card->ext_csd.rel_sectors = ext_csd[EXT_CSD_REL_WR_SEC_C];
mmc: MMC boot partitions support. Allows device MMC boot partitions to be accessed. MMC partitions are treated effectively as separate block devices on the same MMC card. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-12 06:10:25 +07:00
/*
* There are two boot regions of equal size, defined in
* multiples of 128K.
*/
mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-06 21:41:38 +07:00
if (ext_csd[EXT_CSD_BOOT_MULT] && mmc_boot_partition_access(card->host)) {
for (idx = 0; idx < MMC_NUM_BOOT_PARTITION; idx++) {
part_size = ext_csd[EXT_CSD_BOOT_MULT] << 17;
mmc_part_add(card, part_size,
EXT_CSD_PART_CONFIG_ACC_BOOT0 + idx,
mmc: boot partition ro lock support Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-02 14:51:06 +07:00
"boot%d", idx, true,
MMC_BLK_DATA_AREA_BOOT);
mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-06 21:41:38 +07:00
}
}
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
}
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
card->ext_csd.raw_hc_erase_gap_size =
mmc: core: Fix comparison issue in mmc_compare_ext_csds Found this issue during code review. Actually, there are two issues which both compensate together in lucky case. In unlucky case the bus width probing might not work as expected. Signed-off-by: Jurgen Heeks <jurgen.heeks@nokia.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-01 19:30:55 +07:00
ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
card->ext_csd.raw_sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.raw_sec_erase_mult =
ext_csd[EXT_CSD_SEC_ERASE_MULT];
card->ext_csd.raw_sec_feature_support =
ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
card->ext_csd.raw_trim_mult =
ext_csd[EXT_CSD_TRIM_MULT];
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
if (card->ext_csd.rev >= 4) {
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
/*
* Enhanced area feature support -- check whether the eMMC
* card has the Enhanced area enabled. If so, export enhanced
* area offset and size to user by adding sysfs interface.
*/
mmc: core: ext_csd.raw_* used in comparison but never set f39b2dd9d ("mmc: core: Bus width testing needs to handle suspend/resume") added code to only compare read-only ext_csd fields in bus width testing code, yet it's comparing some fields that are never set. The affected fields are ext_csd.raw_erased_mem_count and ext_csd.raw_partition_support. Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com> Acked-by: Philip Rakity <prakity@marvell.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-24 23:12:30 +07:00
card->ext_csd.raw_partition_support = ext_csd[EXT_CSD_PARTITION_SUPPORT];
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
if ((ext_csd[EXT_CSD_PARTITION_SUPPORT] & 0x2) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(ext_csd[EXT_CSD_PARTITION_ATTRIBUTE] & 0x1)) {
mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-06 21:41:38 +07:00
hc_erase_grp_sz =
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-06 21:41:38 +07:00
hc_wp_grp_sz =
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.enhanced_area_en = 1;
/*
* calculate the enhanced data area offset, in bytes
*/
card->ext_csd.enhanced_area_offset =
(ext_csd[139] << 24) + (ext_csd[138] << 16) +
(ext_csd[137] << 8) + ext_csd[136];
if (mmc_card_blockaddr(card))
card->ext_csd.enhanced_area_offset <<= 9;
/*
* calculate the enhanced data area size, in kilobytes
*/
card->ext_csd.enhanced_area_size =
(ext_csd[142] << 16) + (ext_csd[141] << 8) +
ext_csd[140];
card->ext_csd.enhanced_area_size *=
(size_t)(hc_erase_grp_sz * hc_wp_grp_sz);
card->ext_csd.enhanced_area_size <<= 9;
} else {
/*
* If the enhanced area is not enabled, disable these
* device attributes.
*/
card->ext_csd.enhanced_area_offset = -EINVAL;
card->ext_csd.enhanced_area_size = -EINVAL;
}
mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-06 21:41:38 +07:00
/*
* General purpose partition feature support --
* If ext_csd has the size of general purpose partitions,
* set size, part_cfg, partition name in mmc_part.
*/
if (ext_csd[EXT_CSD_PARTITION_SUPPORT] &
EXT_CSD_PART_SUPPORT_PART_EN) {
if (card->ext_csd.enhanced_area_en != 1) {
hc_erase_grp_sz =
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE];
hc_wp_grp_sz =
ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
card->ext_csd.enhanced_area_en = 1;
}
for (idx = 0; idx < MMC_NUM_GP_PARTITION; idx++) {
if (!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3] &&
!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1] &&
!ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2])
continue;
part_size =
(ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 2]
<< 16) +
(ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3 + 1]
<< 8) +
ext_csd[EXT_CSD_GP_SIZE_MULT + idx * 3];
part_size *= (size_t)(hc_erase_grp_sz *
hc_wp_grp_sz);
mmc_part_add(card, part_size << 19,
EXT_CSD_PART_CONFIG_ACC_GP0 + idx,
mmc: boot partition ro lock support Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-02 14:51:06 +07:00
"gp%d", idx, false,
MMC_BLK_DATA_AREA_GP);
mmc: core: general purpose MMC partition support. It allows gerneral purpose partitions in MMC Device. And I try to simply make mmc_blk_alloc_parts using mmc_part structure suggested by Andrei Warkentin. After patching, we see general purpose partitions like this: > cat /proc/partitions 179 0 847872 mmcblk0 179 192 4096 mmcblk0gp3 179 160 4096 mmcblk0gp2 179 128 4096 mmcblk0gp1 179 96 1052672 mmcblk0gp0 179 64 1024 mmcblk0boot1 179 32 1024 mmcblk0boot0 Signed-off-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Andrei Warkentin <awarkentin@vmware.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-06 21:41:38 +07:00
}
}
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
card->ext_csd.sec_trim_mult =
ext_csd[EXT_CSD_SEC_TRIM_MULT];
card->ext_csd.sec_erase_mult =
ext_csd[EXT_CSD_SEC_ERASE_MULT];
card->ext_csd.sec_feature_support =
ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT];
card->ext_csd.trim_timeout = 300 *
ext_csd[EXT_CSD_TRIM_MULT];
mmc: boot partition ro lock support Enable boot partitions to be read-only locked until next power on via a sysfs entry. There will be one sysfs entry for each boot partition: /sys/block/mmcblkXbootY/ro_lock_until_next_power_on Each boot partition is locked by writing 1 to its file. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: John Beckett <john.beckett@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-02 14:51:06 +07:00
/*
* Note that the call to mmc_part_add above defaults to read
* only. If this default assumption is changed, the call must
* take into account the value of boot_locked below.
*/
card->ext_csd.boot_ro_lock = ext_csd[EXT_CSD_BOOT_WP];
card->ext_csd.boot_ro_lockable = true;
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
}
mmc: core: add eMMC hardware reset support eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-29 20:42:11 +07:00
if (card->ext_csd.rev >= 5) {
mmc: support BKOPS feature for eMMC Enable eMMC background operations (BKOPS) feature. If URGENT_BKOPS is set after a response, note that BKOPS are required. Immediately run BKOPS if required. Read/write operations should be requested during BKOPS(LEVEL-1), then issue HPI to interrupt the ongoing BKOPS and service the foreground operation. (This patch only controls the LEVEL2/3.) When repeating the writing 1GB data, at a certain time, performance is decreased. At that time, card triggers the Level-3 or Level-2. After running bkops, performance is recovered. Future considerations: * Check BKOPS_LEVEL=1 and start BKOPS in a preventive manner. * Interrupt ongoing BKOPS before powering off the card. * How do we get BKOPS_STATUS value (periodically send ext_csd command)? * If using periodic bkops, also consider runtime_pm control. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Konstantin Dorfman <kdorfman@codeaurora.org> Reviewed-by: Maya Erez <merez@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-09-17 15:42:02 +07:00
/* check whether the eMMC card supports BKOPS */
if (ext_csd[EXT_CSD_BKOPS_SUPPORT] & 0x1) {
card->ext_csd.bkops = 1;
card->ext_csd.bkops_en = ext_csd[EXT_CSD_BKOPS_EN];
card->ext_csd.raw_bkops_status =
ext_csd[EXT_CSD_BKOPS_STATUS];
if (!card->ext_csd.bkops_en)
pr_info("%s: BKOPS_EN bit is not set\n",
mmc_hostname(card->host));
}
mmc: core: support HPI send command HPI command is defined in eMMC4.41. This feature is important for eMMC4.5 devices. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-18 12:26:42 +07:00
/* check whether the eMMC card supports HPI */
if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x1) {
card->ext_csd.hpi = 1;
if (ext_csd[EXT_CSD_HPI_FEATURES] & 0x2)
card->ext_csd.hpi_cmd = MMC_STOP_TRANSMISSION;
else
card->ext_csd.hpi_cmd = MMC_SEND_STATUS;
/*
* Indicate the maximum timeout to close
* a command interrupted by HPI
*/
card->ext_csd.out_of_int_time =
ext_csd[EXT_CSD_OUT_OF_INTERRUPT_TIME] * 10;
}
mmc: Reliable write support. Allows reliable writes to be used for MMC writes. Reliable writes are used to service write REQ_FUA/REQ_META requests. Handles both the legacy and the enhanced reliable write support in MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-01 06:40:00 +07:00
card->ext_csd.rel_param = ext_csd[EXT_CSD_WR_REL_PARAM];
mmc: core: add eMMC hardware reset support eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-29 20:42:11 +07:00
card->ext_csd.rst_n_function = ext_csd[EXT_CSD_RST_N_FUNCTION];
mmc: core: Expose access to RPMB partition Following JEDEC standard, if the mmc supports RPMB partition, a new interface is created and exposed via /dev/block. Users will be able to access RPMB partition using standard mmc IOCTL commands. Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Krishna Konda <kkonda@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-18 06:08:24 +07:00
/*
* RPMB regions are defined in multiples of 128K.
*/
card->ext_csd.raw_rpmb_size_mult = ext_csd[EXT_CSD_RPMB_MULT];
mmc: core: expose RPMB partition only for CMD23 capable hosts SET_BLOCK_COUNT CMD23 is needed for all access to RPMB partition. If block count is not set by CMD23, all subsequent read/write commands fail as per eMMC specification. So, If the host does not support CMD23, do not expose RPMB partition. Accessing RPMB partition can cause hang / huge delay for hosts which do not support CMD23. Signed-off-by: Balaji T K <balajitk@ti.com> Reported-and-Tested-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-01-25 18:30:30 +07:00
if (ext_csd[EXT_CSD_RPMB_MULT] && mmc_host_cmd23(card->host)) {
mmc: core: Expose access to RPMB partition Following JEDEC standard, if the mmc supports RPMB partition, a new interface is created and exposed via /dev/block. Users will be able to access RPMB partition using standard mmc IOCTL commands. Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Krishna Konda <kkonda@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-18 06:08:24 +07:00
mmc_part_add(card, ext_csd[EXT_CSD_RPMB_MULT] << 17,
EXT_CSD_PART_CONFIG_ACC_RPMB,
"rpmb", 0, false,
MMC_BLK_DATA_AREA_RPMB);
}
mmc: core: add eMMC hardware reset support eMMC's may have a hardware reset line. This patch provides a host controller operation to implement hardware reset and a function to reset and reinitialize the card. Also, for MMC, the reset is always performed before initialization. The host must set the new host capability MMC_CAP_HW_RESET to enable hardware reset. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-08-29 20:42:11 +07:00
}
mmc: Reliable write support. Allows reliable writes to be used for MMC writes. Reliable writes are used to service write REQ_FUA/REQ_META requests. Handles both the legacy and the enhanced reliable write support in MMC cards. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-01 06:40:00 +07:00
mmc: core: ext_csd.raw_* used in comparison but never set f39b2dd9d ("mmc: core: Bus width testing needs to handle suspend/resume") added code to only compare read-only ext_csd fields in bus width testing code, yet it's comparing some fields that are never set. The affected fields are ext_csd.raw_erased_mem_count and ext_csd.raw_partition_support. Signed-off-by: Andrei Warkentin <andrey.warkentin@gmail.com> Acked-by: Philip Rakity <prakity@marvell.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-24 23:12:30 +07:00
card->ext_csd.raw_erased_mem_count = ext_csd[EXT_CSD_ERASED_MEM_CONT];
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
if (ext_csd[EXT_CSD_ERASED_MEM_CONT])
card->erased_byte = 0xFF;
else
card->erased_byte = 0x0;
mmc: core: Cleanup eMMC4.5 conditionals Code cleanup, putting all eMMC 4.5 detection cases together. This patch removes one if-statement and assembles all. And it also removes variable initialization below else-statement -- all members of card structure are already set to zero at card-init. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-25 07:43:12 +07:00
/* eMMC v4.5 or later */
mmc: core: Add Power Off Notify Feature eMMC 4.5 This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-13 13:34:16 +07:00
if (card->ext_csd.rev >= 6) {
mmc: core: Cleanup eMMC4.5 conditionals Code cleanup, putting all eMMC 4.5 detection cases together. This patch removes one if-statement and assembles all. And it also removes variable initialization below else-statement -- all members of card structure are already set to zero at card-init. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-25 07:43:12 +07:00
card->ext_csd.feature_support |= MMC_DISCARD_FEATURE;
mmc: core: Add default timeout value for CMD6 EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 12:15:29 +07:00
card->ext_csd.generic_cmd6_time = 10 *
ext_csd[EXT_CSD_GENERIC_CMD6_TIME];
mmc: core: Add Power Off Notify Feature eMMC 4.5 This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-13 13:34:16 +07:00
card->ext_csd.power_off_longtime = 10 *
ext_csd[EXT_CSD_POWER_OFF_LONG_TIME];
mmc: core: Add default timeout value for CMD6 EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 12:15:29 +07:00
mmc: core: Cleanup eMMC4.5 conditionals Code cleanup, putting all eMMC 4.5 detection cases together. This patch removes one if-statement and assembles all. And it also removes variable initialization below else-statement -- all members of card structure are already set to zero at card-init. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-25 07:43:12 +07:00
card->ext_csd.cache_size =
ext_csd[EXT_CSD_CACHE_SIZE + 0] << 0 |
ext_csd[EXT_CSD_CACHE_SIZE + 1] << 8 |
ext_csd[EXT_CSD_CACHE_SIZE + 2] << 16 |
ext_csd[EXT_CSD_CACHE_SIZE + 3] << 24;
mmc: MMC-4.5 Data Tag Support MMC-4.5 data tag feature will be used to store the file system meta-data in the tagged region of eMMC. This will improve the write and subsequent read transfer time for the meta data. Signed-off-by: Saugata Das <saugata.das@linaro.org> Tested-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-21 14:39:17 +07:00
if (ext_csd[EXT_CSD_DATA_SECTOR_SIZE] == 1)
card->ext_csd.data_sector_size = 4096;
else
card->ext_csd.data_sector_size = 512;
if ((ext_csd[EXT_CSD_DATA_TAG_SUPPORT] & 1) &&
(ext_csd[EXT_CSD_TAG_UNIT_SIZE] <= 8)) {
card->ext_csd.data_tag_unit_size =
((unsigned int) 1 << ext_csd[EXT_CSD_TAG_UNIT_SIZE]) *
(card->ext_csd.data_sector_size);
} else {
card->ext_csd.data_tag_unit_size = 0;
}
mmc: block: Allow disabling 512B sector size emulation This patch adds support for large sector size of 4KB by disabling emulation. This patch passes eMMC DATA_SECTOR_SIZE as the logical block size during mmc_blk_alloc_req. In order to use this patch for 4KB sector size, ensure that USE_NATIVE_SECTOR is enabled, partition table is 4KB sector size aligned and file system block and sector size are 4KB multiples. Signed-off-by: Saugata Das <saugata.das@linaro.org> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-17 18:02:21 +07:00
} else {
card->ext_csd.data_sector_size = 512;
mmc: core: Cleanup eMMC4.5 conditionals Code cleanup, putting all eMMC 4.5 detection cases together. This patch removes one if-statement and assembles all. And it also removes variable initialization below else-statement -- all members of card structure are already set to zero at card-init. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-25 07:43:12 +07:00
}
mmc: core: Add cache control for eMMC4.5 device This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-14 12:03:21 +07:00
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
out:
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
return err;
}
static inline void mmc_free_ext_csd(u8 *ext_csd)
{
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
kfree(ext_csd);
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
{
u8 *bw_ext_csd;
int err;
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
if (bus_width == MMC_BUS_WIDTH_1)
return 0;
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
err = mmc_get_ext_csd(card, &bw_ext_csd);
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
if (err || bw_ext_csd == NULL) {
mmc: core: Remove dead code bus_width is passed to the function and when 0 (MMC_BUS_WIDTH_1) will cause the function to return. So in in the second test it definitely is different from 0, and the third test is redundant. Signed-off-by: Philippe De Swert <philippedeswert@gmail.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-12 03:32:05 +07:00
err = -EINVAL;
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
goto out;
}
/* only compare read only fields */
mmc: core: Fix comparison issue in mmc_compare_ext_csds Found this issue during code review. Actually, there are two issues which both compensate together in lucky case. In unlucky case the bus width probing might not work as expected. Signed-off-by: Jurgen Heeks <jurgen.heeks@nokia.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-02-01 19:30:55 +07:00
err = !((card->ext_csd.raw_partition_support ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_PARTITION_SUPPORT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_erased_mem_count ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_ERASED_MEM_CONT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.rev ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_REV]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_ext_csd_structure ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_STRUCTURE]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_card_type ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_CARD_TYPE]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_s_a_timeout ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_S_A_TIMEOUT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_hc_erase_gap_size ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_HC_WP_GRP_SIZE]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_erase_timeout_mult ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_ERASE_TIMEOUT_MULT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_hc_erase_grp_size ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_sec_trim_mult ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_SEC_TRIM_MULT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_sec_erase_mult ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_SEC_ERASE_MULT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_sec_feature_support ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_SEC_FEATURE_SUPPORT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_trim_mult ==
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
bw_ext_csd[EXT_CSD_TRIM_MULT]) &&
mmc: core: Bus width testing needs to handle suspend/resume On reading the ext_csd for the first time (in 1 bit mode), save the ext_csd information needed for bus width compare. On every pass we make re-reading the ext_csd, compare the data against the saved ext_csd data. This fixes a regression introduced in 3.0-rc1 by 08ee80cc397ac1a3 ("mmc: core: eMMC bus width may not work on all platforms"), which incorrectly assumed we would be re-reading the ext_csd at resume- time. Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-07-07 23:04:55 +07:00
(card->ext_csd.raw_sectors[0] ==
bw_ext_csd[EXT_CSD_SEC_CNT + 0]) &&
(card->ext_csd.raw_sectors[1] ==
bw_ext_csd[EXT_CSD_SEC_CNT + 1]) &&
(card->ext_csd.raw_sectors[2] ==
bw_ext_csd[EXT_CSD_SEC_CNT + 2]) &&
(card->ext_csd.raw_sectors[3] ==
bw_ext_csd[EXT_CSD_SEC_CNT + 3]));
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
if (err)
err = -EINVAL;
out:
mmc_free_ext_csd(bw_ext_csd);
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
return err;
}
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 05:54:50 +07:00
MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1],
card->raw_cid[2], card->raw_cid[3]);
MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1],
card->raw_csd[2], card->raw_csd[3]);
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 05:54:50 +07:00
MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid);
MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial);
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
MMC_DEV_ATTR(enhanced_area_offset, "%llu\n",
card->ext_csd.enhanced_area_offset);
MMC_DEV_ATTR(enhanced_area_size, "%u\n", card->ext_csd.enhanced_area_size);
mmc: core: Extend sysfs to ext_csd parameters for RPMB support Extend current sysfs access to ext_csd rpmb parameters (RPMB partition size) and rel_sector information. Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Krishna Konda <kkonda@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-08-06 22:12:29 +07:00
MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 05:54:50 +07:00
static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
&dev_attr_csd.attr,
&dev_attr_date.attr,
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
&dev_attr_erase_size.attr,
&dev_attr_preferred_erase_size.attr,
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 05:54:50 +07:00
&dev_attr_fwrev.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
&dev_attr_name.attr,
&dev_attr_oemid.attr,
&dev_attr_serial.attr,
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
&dev_attr_enhanced_area_offset.attr,
&dev_attr_enhanced_area_size.attr,
mmc: core: Extend sysfs to ext_csd parameters for RPMB support Extend current sysfs access to ext_csd rpmb parameters (RPMB partition size) and rel_sector information. Signed-off-by: Loic Pallardy <loic.pallardy@stericsson.com> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Krishna Konda <kkonda@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-08-06 22:12:29 +07:00
&dev_attr_raw_rpmb_size_mult.attr,
&dev_attr_rel_sectors.attr,
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 05:54:50 +07:00
NULL,
};
static struct attribute_group mmc_std_attr_group = {
.attrs = mmc_std_attrs,
};
driver model: constify attribute groups Let attribute group vectors be declared "const". We'd like to let most attribute metadata live in read-only sections... this is a start. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-06-25 00:06:31 +07:00
static const struct attribute_group *mmc_attr_groups[] = {
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 05:54:50 +07:00
&mmc_std_attr_group,
NULL,
};
static struct device_type mmc_type = {
.groups = mmc_attr_groups,
};
mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 22:11:47 +07:00
/*
* Select the PowerClass for the current bus width
* If power class is defined for 4/8 bit bus in the
* extended CSD register, select it by executing the
* mmc_switch command.
*/
static int mmc_select_powerclass(struct mmc_card *card,
unsigned int bus_width, u8 *ext_csd)
{
int err = 0;
unsigned int pwrclass_val;
unsigned int index = 0;
struct mmc_host *host;
BUG_ON(!card);
host = card->host;
BUG_ON(!host);
if (ext_csd == NULL)
return 0;
/* Power class selection is supported for versions >= 4.0 */
if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
return 0;
/* Power class values are defined only for 4/8 bit bus */
if (bus_width == EXT_CSD_BUS_WIDTH_1)
return 0;
switch (1 << host->ios.vdd) {
case MMC_VDD_165_195:
if (host->ios.clock <= 26000000)
index = EXT_CSD_PWR_CL_26_195;
else if (host->ios.clock <= 52000000)
index = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
EXT_CSD_PWR_CL_52_195 :
EXT_CSD_PWR_CL_DDR_52_195;
else if (host->ios.clock <= 200000000)
index = EXT_CSD_PWR_CL_200_195;
break;
mmc: core: fix power class selection mmc_select_powerclass() function returns error if eMMC VDD level supported by host is between 2.7v to 3.2v. According to eMMC specification, valid voltage for high voltage cards is 2.7v to 3.6v. This patch ensures that 2.7v to 3.6v VDD range is treated as valid range. Also, failure to set the power class shouldn't be treated as fatal error because even if setting the power class fails, card can still work in default power class. If mmc_select_powerclass() returns error, just print the warning message and go ahead with rest of the card initialization. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-03 13:55:58 +07:00
case MMC_VDD_27_28:
case MMC_VDD_28_29:
case MMC_VDD_29_30:
case MMC_VDD_30_31:
case MMC_VDD_31_32:
mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 22:11:47 +07:00
case MMC_VDD_32_33:
case MMC_VDD_33_34:
case MMC_VDD_34_35:
case MMC_VDD_35_36:
if (host->ios.clock <= 26000000)
index = EXT_CSD_PWR_CL_26_360;
else if (host->ios.clock <= 52000000)
index = (bus_width <= EXT_CSD_BUS_WIDTH_8) ?
EXT_CSD_PWR_CL_52_360 :
EXT_CSD_PWR_CL_DDR_52_360;
else if (host->ios.clock <= 200000000)
index = EXT_CSD_PWR_CL_200_360;
break;
default:
pr_warning("%s: Voltage range not supported "
"for power class.\n", mmc_hostname(host));
return -EINVAL;
}
pwrclass_val = ext_csd[index];
if (bus_width & (EXT_CSD_BUS_WIDTH_8 | EXT_CSD_DDR_BUS_WIDTH_8))
pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_8BIT_MASK) >>
EXT_CSD_PWR_CL_8BIT_SHIFT;
else
pwrclass_val = (pwrclass_val & EXT_CSD_PWR_CL_4BIT_MASK) >>
EXT_CSD_PWR_CL_4BIT_SHIFT;
/* If the power class is different from the default value */
if (pwrclass_val > 0) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_CLASS,
pwrclass_val,
mmc: core: Modify the timeout value for writing power class This patch will apply the generic CMD6 timeout to switch command for power class. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-18 11:20:57 +07:00
card->ext_csd.generic_cmd6_time);
mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 22:11:47 +07:00
}
return err;
}
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
/*
* Selects the desired buswidth and switch to the HS200 mode
* if bus width set without error
*/
static int mmc_select_hs200(struct mmc_card *card)
{
mmc: core: fix the signaling 1.8V for HS200 Currently only 1.2V is treated for HS200 mode. If the host has only 1.8V I/O capability not 1.2V, mmc_set_signal_voltage can't be called for 1.8V HS200. EXT_CSD_CARD_TYPE_SDR_1_8V needs to be considered. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-25 14:18:01 +07:00
int idx, err = -EINVAL;
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
struct mmc_host *host;
static unsigned ext_csd_bits[] = {
EXT_CSD_BUS_WIDTH_4,
EXT_CSD_BUS_WIDTH_8,
};
static unsigned bus_widths[] = {
MMC_BUS_WIDTH_4,
MMC_BUS_WIDTH_8,
};
BUG_ON(!card);
host = card->host;
if (card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_2V &&
mmc: core: fix the signaling 1.8V for HS200 Currently only 1.2V is treated for HS200 mode. If the host has only 1.8V I/O capability not 1.2V, mmc_set_signal_voltage can't be called for 1.8V HS200. EXT_CSD_CARD_TYPE_SDR_1_8V needs to be considered. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-25 14:18:01 +07:00
host->caps2 & MMC_CAP2_HS200_1_2V_SDR)
mmc: core: Break out start_signal_voltage_switch Allow callers to access the start_signal_voltage_switch host_ops member without going through any cmd11 logic. This is mostly a preparation for the following signal voltage switch patch. Also, reset ios.signal_voltage to its original value if start_signal_voltage_switch fails. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-01-28 21:08:27 +07:00
err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_120);
mmc: core: fix the signaling 1.8V for HS200 Currently only 1.2V is treated for HS200 mode. If the host has only 1.8V I/O capability not 1.2V, mmc_set_signal_voltage can't be called for 1.8V HS200. EXT_CSD_CARD_TYPE_SDR_1_8V needs to be considered. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-25 14:18:01 +07:00
if (err && card->ext_csd.card_type & EXT_CSD_CARD_TYPE_SDR_1_8V &&
host->caps2 & MMC_CAP2_HS200_1_8V_SDR)
mmc: core: Break out start_signal_voltage_switch Allow callers to access the start_signal_voltage_switch host_ops member without going through any cmd11 logic. This is mostly a preparation for the following signal voltage switch patch. Also, reset ios.signal_voltage to its original value if start_signal_voltage_switch fails. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-01-28 21:08:27 +07:00
err = __mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180);
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
/* If fails try again during next card power cycle */
if (err)
goto err;
idx = (host->caps & MMC_CAP_8_BIT_DATA) ? 1 : 0;
/*
* Unlike SD, MMC cards dont have a configuration register to notify
* supported bus width. So bus test command should be run to identify
* the supported bus width or compare the ext csd values of current
* bus width and ext csd values of 1 bit mode read earlier.
*/
for (; idx >= 0; idx--) {
/*
* Host is capable of 8bit transfer, then switch
* the device to work in 8bit transfer mode. If the
* mmc switch command returns error then switch to
* 4bit transfer mode. On success set the corresponding
* bus width on the host.
*/
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx],
card->ext_csd.generic_cmd6_time);
if (err)
continue;
mmc_set_bus_width(card->host, bus_widths[idx]);
if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
err = mmc_compare_ext_csds(card, bus_widths[idx]);
else
err = mmc_bus_test(card, bus_widths[idx]);
if (!err)
break;
}
/* switch to HS200 mode if bus width set successfully */
if (!err)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HS_TIMING, 2, 0);
err:
return err;
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
* Handle the detection and initialisation of a card.
*
MMC: Trivial comment cleanup Make the variable name in the comments match the actual name of the variable. Signed-off-by: Deepak Saxena <dsaxena@laptop.org> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-06-17 09:20:57 +07:00
* In the case of a resume, "oldcard" will contain the card
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
* we're trying to reinitialise.
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
*/
mmc: fix silly copy-and-paste error Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-19 21:14:43 +07:00
static int mmc_init_card(struct mmc_host *host, u32 ocr,
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
struct mmc_card *oldcard)
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
{
struct mmc_card *card;
mmc: Fix printing of card DDR type We should not call mmc_card_set_ddr_mode() if we are in single data mode. This sets DDR and causes the kernel log to say the card is DDR when it is not. Explicitly set ddr to 0 rather then rely on MMC_SDR_MODE being 0 when doing the checks. Signed-off-by: Philip Rakity <prakity@marvell.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-11-08 04:22:28 +07:00
int err, ddr = 0;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
u32 cid[4];
unsigned int max_dtr;
mmc: check if mmc cards < 2GB do sector addressing Some TOSHIBA MMC cards only support sector addressing even though the size is < 2GB. According to JEDEC Spec JESD84-A441-1 the ocr register (bits 30, 29) determine byte/sector mode. Use them. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-02-14 14:13:09 +07:00
u32 rocr;
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
u8 *ext_csd = NULL;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
BUG_ON(!host);
mmc: replace BUG_ON with WARN_ON Replace all cases of BUG_ON with WARN_ON where there is a chance (with varying degrees of slim) that the kernel can continue without incidence. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-09 18:23:56 +07:00
WARN_ON(!host->claimed);
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: core: Set correct bus mode before card init Earlier all cards where initiated with bus mode set as OPENDRAIN, and then later switched to PUSHPULL. According to the MMC/SD/SDIO specifications only MMC cards use OPENDRAIN during init. For both SD and SDIO the bus mode shall be PUSHPULL before attempting to init the card. The consequence of having incorrect bus mode can lead to not being able to detect the card. Therefore the default behavior have now been changed to PUSHPULL in mmc_power_up, and will only be temporarily switched when trying to attach or init a MMC card. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf HANSSON <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-15 22:50:38 +07:00
/* Set correct bus mode for MMC before attempting init */
if (!mmc_host_is_spi(host))
mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
* Since we're changing the OCR value, we seem to
* need to tell some cards to go back to the idle
* state. We wait 1ms to give cards time to
* respond.
mmc: core: Put eMMC in Sleep mode before suspend Put MMC to sleep if it supports SLEEP/AWAKE (CMD5) in the mmc suspend so that Vcc (NAND core) can be cut to minimize power consumption. eMMC put into SLEEP can respond to CMD0 or H/W reset or CMD5. Current implemention on resume from suspend relies on CMD0 in mmc_init_card to get out of SLEEP mode. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-08 23:38:39 +07:00
* mmc_go_idle is needed for eMMC that are asleep
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
*/
mmc_go_idle(host);
/* The extra bit indicates that we support high capacity */
mmc: check if mmc cards < 2GB do sector addressing Some TOSHIBA MMC cards only support sector addressing even though the size is < 2GB. According to JEDEC Spec JESD84-A441-1 the ocr register (bits 30, 29) determine byte/sector mode. Use them. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-02-14 14:13:09 +07:00
err = mmc_send_op_cond(host, ocr | (1 << 30), &rocr);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
if (err)
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
goto err;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
/*
* For SPI, enable CRC as appropriate.
*/
if (mmc_host_is_spi(host)) {
err = mmc_spi_set_crc(host, use_spi_crc);
if (err)
goto err;
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
* Fetch CID from card.
*/
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
if (mmc_host_is_spi(host))
err = mmc_send_cid(host, cid);
else
err = mmc_all_send_cid(host, cid);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
if (err)
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
goto err;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
if (oldcard) {
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) {
err = -ENOENT;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
goto err;
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
card = oldcard;
} else {
/*
* Allocate card structure.
*/
mmc: use sysfs groups to handle conditional attributes Suppressing uevents turned out to be a bad idea as it screws up the order of events, making user space very confused. Change the system to use sysfs groups instead. This is a regression that, for some odd reason, has gone unnoticed for some time. It confuses hal so that the block devices (which have the mmc device as a parent) are not registered. End result being that desktop magic when cards are inserted won't work. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-03-22 05:54:50 +07:00
card = mmc_alloc_card(host, &mmc_type);
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
if (IS_ERR(card)) {
err = PTR_ERR(card);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
goto err;
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
card->type = MMC_TYPE_MMC;
card->rca = 1;
memcpy(card->raw_cid, cid, sizeof(card->raw_cid));
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
* For native busses: set card RCA and quit open drain mode.
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
*/
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
if (!mmc_host_is_spi(host)) {
err = mmc_set_relative_addr(card);
if (err)
goto free_card;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL);
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
if (!oldcard) {
/*
* Fetch CSD from card.
*/
err = mmc_send_csd(card, card->raw_csd);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
if (err)
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
goto free_card;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
err = mmc_decode_csd(card);
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
if (err)
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
goto free_card;
err = mmc_decode_cid(card);
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
if (err)
mmc: remove old card states Remove card states that no longer make any sense. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:11:57 +07:00
goto free_card;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
mmc: separate out reading EXT_CSD Separate the reading and decoding of the EXT_CSD register with the actions taken on it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 20:08:30 +07:00
* Select card, as all following commands rely on that.
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
*/
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
if (!mmc_host_is_spi(host)) {
err = mmc_select_card(card);
if (err)
goto free_card;
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
if (!oldcard) {
/*
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
* Fetch and process extended CSD.
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
*/
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
err = mmc_get_ext_csd(card, &ext_csd);
if (err)
goto free_card;
err = mmc_read_ext_csd(card, ext_csd);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
if (err)
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
goto free_card;
mmc: check if mmc cards < 2GB do sector addressing Some TOSHIBA MMC cards only support sector addressing even though the size is < 2GB. According to JEDEC Spec JESD84-A441-1 the ocr register (bits 30, 29) determine byte/sector mode. Use them. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-02-14 14:13:09 +07:00
/* If doing byte addressing, check if required to do sector
* addressing. Handle the case of <2GB cards needing sector
* addressing. See section 8.1 JEDEC Standard JED84-A441;
* ocr register has bit 30 set for sector addressing.
*/
if (!(mmc_card_blockaddr(card)) && (rocr & (1<<30)))
mmc_card_set_blockaddr(card);
mmc: add erase, secure erase, trim and secure trim operations SD/MMC cards tend to support an erase operation. In addition, eMMC v4.4 cards can support secure erase, trim and secure trim operations that are all variants of the basic erase command. SD/MMC device attributes "erase_size" and "preferred_erase_size" have been added. "erase_size" is the minimum size, in bytes, of an erase operation. For MMC, "erase_size" is the erase group size reported by the card. Note that "erase_size" does not apply to trim or secure trim operations where the minimum size is always one 512 byte sector. For SD, "erase_size" is 512 if the card is block-addressed, 0 otherwise. SD/MMC cards can erase an arbitrarily large area up to and including the whole card. When erasing a large area it may be desirable to do it in smaller chunks for three reasons: 1. A single erase command will make all other I/O on the card wait. This is not a problem if the whole card is being erased, but erasing one partition will make I/O for another partition on the same card wait for the duration of the erase - which could be a several minutes. 2. To be able to inform the user of erase progress. 3. The erase timeout becomes too large to be very useful. Because the erase timeout contains a margin which is multiplied by the size of the erase area, the value can end up being several minutes for large areas. "erase_size" is not the most efficient unit to erase (especially for SD where it is just one sector), hence "preferred_erase_size" provides a good chunk size for erasing large areas. For MMC, "preferred_erase_size" is the high-capacity erase size if a card specifies one, otherwise it is based on the capacity of the card. For SD, "preferred_erase_size" is the allocation unit size specified by the card. "preferred_erase_size" is in bytes. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Jens Axboe <axboe@kernel.dk> Cc: Kyungmin Park <kmpark@infradead.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Ben Gardiner <bengardiner@nanometrics.ca> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-12 04:17:46 +07:00
/* Erase size depends on CSD and Extended CSD */
mmc_set_erase_size(card);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
/*
* If enhanced_area_en is TRUE, host needs to enable ERASE_GRP_DEF
Fix common misspellings Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-31 08:57:33 +07:00
* bit. This bit will be lost every time after a reset or power off.
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
*/
mmc: core: add high-capacity erase size capability flag Let drivers specify the use of high-capacity erase size. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-13 16:19:13 +07:00
if (card->ext_csd.enhanced_area_en ||
(card->ext_csd.rev >= 3 && (host->caps2 & MMC_CAP2_HC_ERASE_SZ))) {
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
mmc: core: Add default timeout value for CMD6 EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 12:15:29 +07:00
EXT_CSD_ERASE_GROUP_DEF, 1,
card->ext_csd.generic_cmd6_time);
mmc: export eMMC4.4 enhanced area details to sysfs Enhanced area feature is a new feature defined in eMMC4.4 standard. This user data area provides higher performance/reliability, at the expense of using twice the effective media space due to the area using SLC. The MMC driver now reads out the enhanced area offset and size and adds them to the device attributes in sysfs. Enabling the enhanced area can only be done once, and should be done in manufacturing. To use this feature, bit ERASE_GRP_DEF should also be set. Documentation/ABI/testing/sysfs-devices-mmc describes the two new attributes. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-22 03:09:41 +07:00
if (err && err != -EBADMSG)
goto free_card;
if (err) {
err = 0;
/*
* Just disable enhanced area off & sz
* will try to enable ERASE_GROUP_DEF
* during next time reinit
*/
card->ext_csd.enhanced_area_offset = -EINVAL;
card->ext_csd.enhanced_area_size = -EINVAL;
} else {
card->ext_csd.erase_group_def = 1;
/*
* enable ERASE_GRP_DEF successfully.
* This will affect the erase size, so
* here need to reset erase size
*/
mmc_set_erase_size(card);
}
}
mmc: Ensure linux starts in eMMC user partition uBoot sometimes leaves eMMC pointing to the private boot partition. Ensure we always start looking at the user partition. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Bruce Clemens <bpclemens@marvell.com> Signed-off-by: Mark F. Brown <markb@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-20 01:10:33 +07:00
/*
* Ensure eMMC user default partition is enabled
*/
mmc: MMC boot partitions support. Allows device MMC boot partitions to be accessed. MMC partitions are treated effectively as separate block devices on the same MMC card. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-12 06:10:25 +07:00
if (card->ext_csd.part_config & EXT_CSD_PART_CONFIG_ACC_MASK) {
card->ext_csd.part_config &= ~EXT_CSD_PART_CONFIG_ACC_MASK;
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_PART_CONFIG,
card->ext_csd.part_config,
card->ext_csd.part_time);
if (err && err != -EBADMSG)
goto free_card;
mmc: Ensure linux starts in eMMC user partition uBoot sometimes leaves eMMC pointing to the private boot partition. Ensure we always start looking at the user partition. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Bruce Clemens <bpclemens@marvell.com> Signed-off-by: Mark F. Brown <markb@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-03-20 01:10:33 +07:00
}
mmc: core: Add Power Off Notify Feature eMMC 4.5 This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-13 13:34:16 +07:00
/*
* If the host supports the power_off_notify capability then
* set the notification byte in the ext_csd register of device
*/
if ((host->caps2 & MMC_CAP2_POWEROFF_NOTIFY) &&
mmc: core: Fix power_off_notify during suspend The eMMC 4.5 devices respond to only RESET and AWAKE command in the sleep state. Hence the mmc switch command to notify power off state should be sent before the device enters sleep state. This patch fixes the same. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-15 13:25:46 +07:00
(card->ext_csd.rev >= 6)) {
mmc: core: Add Power Off Notify Feature eMMC 4.5 This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-13 13:34:16 +07:00
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
EXT_CSD_POWER_ON,
card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
mmc: core: Fix setting power notify state variable for non-eMMC This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-04 17:52:47 +07:00
/*
* The err can be -EBADMSG or 0,
* so check for success and update the flag
*/
if (!err)
mmc: core: Fixup broken suspend and eMMC4.5 power off notify This patch fixes up the broken suspend sequence for eMMC with sleep support. Additionally it reworks the eMMC4.5 Power Off Notification feature so it fits together with the existing sleep feature. The CMD0 based re-initialization of the eMMC at resume is re-introduced to maintain compatiblity for devices using sleep. A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off Notification feature. We might be able to remove this cap later on, if we think that Power Off Notification always is preferred over sleep, even if the host is not able to cut the eMMC VCCQ power. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saugata Das <saugata.das@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-05 23:45:39 +07:00
card->ext_csd.power_off_notification = EXT_CSD_POWER_ON;
mmc: core: Fix setting power notify state variable for non-eMMC This patch skips the setting of the power notify state variable for non eMMC 4.5 devices. Also fixes the problem of omap_hsmmc noisy/broken for suspend resume reported by Kevin Hilman. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-04 17:52:47 +07:00
}
mmc: core: Add Power Off Notify Feature eMMC 4.5 This patch adds support for the power off notify feature, available in eMMC 4.5 devices. If the host has support for this feature, then the mmc core will notify the device by setting the POWER_OFF_NOTIFICATION byte in the extended csd register with a value of 1 (POWER_ON). For suspend mode short timeout is used, whereas for the normal poweroff long timeout is used. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-13 13:34:16 +07:00
mmc: separate out reading EXT_CSD Separate the reading and decoding of the EXT_CSD register with the actions taken on it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 20:08:30 +07:00
/*
* Activate high speed (if supported)
*/
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
if (card->ext_csd.hs_max_dtr != 0) {
err = 0;
if (card->ext_csd.hs_max_dtr > 52000000 &&
host->caps2 & MMC_CAP2_HS200)
err = mmc_select_hs200(card);
else if (host->caps & MMC_CAP_MMC_HIGHSPEED)
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
mmc: core: Fix low speed mmc card detection failure This patch fixes the failure of low speed mmc card detection. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-19 10:26:19 +07:00
EXT_CSD_HS_TIMING, 1,
card->ext_csd.generic_cmd6_time);
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
mmc: check status after MMC SWITCH command According to the standard, the SWITCH command should be followed by a SEND_STATUS command to check for errors. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:37 +07:00
if (err && err != -EBADMSG)
mmc: separate out reading EXT_CSD Separate the reading and decoding of the EXT_CSD register with the actions taken on it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 20:08:30 +07:00
goto free_card;
mmc: check status after MMC SWITCH command According to the standard, the SWITCH command should be followed by a SEND_STATUS command to check for errors. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:37 +07:00
if (err) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_warning("%s: switch to highspeed failed\n",
mmc: check status after MMC SWITCH command According to the standard, the SWITCH command should be followed by a SEND_STATUS command to check for errors. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:37 +07:00
mmc_hostname(card->host));
err = 0;
} else {
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
if (card->ext_csd.hs_max_dtr > 52000000 &&
host->caps2 & MMC_CAP2_HS200) {
mmc_card_set_hs200(card);
mmc_set_timing(card->host,
MMC_TIMING_MMC_HS200);
} else {
mmc_card_set_highspeed(card);
mmc_set_timing(card->host, MMC_TIMING_MMC_HS);
}
mmc: check status after MMC SWITCH command According to the standard, the SWITCH command should be followed by a SEND_STATUS command to check for errors. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:37 +07:00
}
mmc: separate out reading EXT_CSD Separate the reading and decoding of the EXT_CSD register with the actions taken on it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 20:08:30 +07:00
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
/*
* Compute bus speed.
*/
max_dtr = (unsigned int)-1;
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
if (mmc_card_highspeed(card) || mmc_card_hs200(card)) {
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
if (max_dtr > card->ext_csd.hs_max_dtr)
max_dtr = card->ext_csd.hs_max_dtr;
mmc: Limit MMC speed to 52MHz if not HS200 If "caps2" host capabilities does not indicate support for MMC HS200, don't allow clock speeds >52MHz. Currently, for MMC, the clock speed is set to the lesser of the max speed the eMMC module supports (card->ext_csd.hs_max_dtr) or the max base clock of the host controller (host->f_max based on BASE_CLK_FREQ in the host CAPS register). This means that a host controller that doesn't support HS200 mode but has a base clock of 100MHz and an eMMC module that supports HS200 speeds will end up using a 100MHz clock. Signed-off-by: Al Cooper <alcooperx@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-30 22:53:35 +07:00
if (mmc_card_highspeed(card) && (max_dtr > 52000000))
max_dtr = 52000000;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
} else if (max_dtr > card->csd.max_dtr) {
max_dtr = card->csd.max_dtr;
}
mmc_set_clock(host, max_dtr);
mmc: MMC 4.4 DDR support Add support for Dual Data Rate MMC cards as defined in the 4.4 specification. Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Cc: linux-mmc@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-01 04:37:23 +07:00
/*
mmc: Fixes for Dual Data Rate (DDR) support The DDR support patch needs the following fixes: - The block driver does not need to know about DDR, any more than it needs to know about bus width. - Not only the card must be switched to DDR mode. The host controller must also be configured, which is done through the 'set_ios()' function. - Do not set the DDR mode state until after the switch command is successful. - Setting block length is not supported in DDR mode. Make that a core function and change the other place it is used (mmc_test) also. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-08-24 17:20:26 +07:00
* Indicate DDR mode (if supported).
mmc: MMC 4.4 DDR support Add support for Dual Data Rate MMC cards as defined in the 4.4 specification. Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Cc: linux-mmc@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-01 04:37:23 +07:00
*/
if (mmc_card_highspeed(card)) {
if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_8V)
mmc: core: add support for eMMC Dual Data Rate eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-13 12:47:18 +07:00
&& ((host->caps & (MMC_CAP_1_8V_DDR |
MMC_CAP_UHS_DDR50))
== (MMC_CAP_1_8V_DDR | MMC_CAP_UHS_DDR50)))
mmc: refine DDR support One flaw with DDR support is that MMC core does not inform the driver which DDR mode it has selected. This patch expands the ios->ddr flag to do that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-11 16:43:50 +07:00
ddr = MMC_1_8V_DDR_MODE;
mmc: MMC 4.4 DDR support Add support for Dual Data Rate MMC cards as defined in the 4.4 specification. Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Cc: linux-mmc@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-01 04:37:23 +07:00
else if ((card->ext_csd.card_type & EXT_CSD_CARD_TYPE_DDR_1_2V)
mmc: core: add support for eMMC Dual Data Rate eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-13 12:47:18 +07:00
&& ((host->caps & (MMC_CAP_1_2V_DDR |
MMC_CAP_UHS_DDR50))
== (MMC_CAP_1_2V_DDR | MMC_CAP_UHS_DDR50)))
mmc: refine DDR support One flaw with DDR support is that MMC core does not inform the driver which DDR mode it has selected. This patch expands the ios->ddr flag to do that. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-11 16:43:50 +07:00
ddr = MMC_1_2V_DDR_MODE;
mmc: MMC 4.4 DDR support Add support for Dual Data Rate MMC cards as defined in the 4.4 specification. Signed-off-by: Hanumath Prasad <hanumath.prasad@stericsson.com> Cc: linux-mmc@vger.kernel.org Acked-by: Linus Walleij <linus.walleij@stericsson.com> Tested-by Zhangfei Gao <zhangfei.gao@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-01 04:37:23 +07:00
}
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
/*
* Indicate HS200 SDR mode (if supported).
*/
if (mmc_card_hs200(card)) {
u32 ext_csd_bits;
u32 bus_width = card->host->ios.bus_width;
/*
* For devices supporting HS200 mode, the bus width has
* to be set before executing the tuning function. If
* set before tuning, then device will respond with CRC
* errors for responses on CMD line. So for HS200 the
* sequence will be
* 1. set bus width 4bit / 8 bit (1 bit not supported)
* 2. switch to HS200 mode
* 3. set the clock to > 52Mhz <=200MHz and
* 4. execute tuning for HS200
*/
if ((host->caps2 & MMC_CAP2_HS200) &&
mmc: core: hs200 fixes This patch fixes following issues when HS200 is enabled: 1. If executing_tuning() host ops is called without mmc_host_clk_hold(), card clocks might get turned off (if MMC_CLK_GATING is enabled) while execute_tuning() is in progress. So this patch makes sure that execute_tuning() is called with mmc_host_clk_hold(). 2. If host timing mode is set to HS200 mode, there should not be any communication with the card until execute_tuning() is completed. But there is a chance that CMD6 might be sent to enable set HPI_EN (of HPI_MGMT field in EXT_CSD) before execute_tuning() is called. So this patch moves this operation after execute_tuning() is completed. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: girish.shivananjappa@linaro.org Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-06 19:29:12 +07:00
card->host->ops->execute_tuning) {
mmc_host_clk_hold(card->host);
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
err = card->host->ops->execute_tuning(card->host,
MMC_SEND_TUNING_BLOCK_HS200);
mmc: core: hs200 fixes This patch fixes following issues when HS200 is enabled: 1. If executing_tuning() host ops is called without mmc_host_clk_hold(), card clocks might get turned off (if MMC_CLK_GATING is enabled) while execute_tuning() is in progress. So this patch makes sure that execute_tuning() is called with mmc_host_clk_hold(). 2. If host timing mode is set to HS200 mode, there should not be any communication with the card until execute_tuning() is completed. But there is a chance that CMD6 might be sent to enable set HPI_EN (of HPI_MGMT field in EXT_CSD) before execute_tuning() is called. So this patch moves this operation after execute_tuning() is completed. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: girish.shivananjappa@linaro.org Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-06 19:29:12 +07:00
mmc_host_clk_release(card->host);
}
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
if (err) {
pr_warning("%s: tuning execution failed\n",
mmc_hostname(card->host));
goto err;
}
ext_csd_bits = (bus_width == MMC_BUS_WIDTH_8) ?
EXT_CSD_BUS_WIDTH_8 : EXT_CSD_BUS_WIDTH_4;
err = mmc_select_powerclass(card, ext_csd_bits, ext_csd);
mmc: core: fix power class selection mmc_select_powerclass() function returns error if eMMC VDD level supported by host is between 2.7v to 3.2v. According to eMMC specification, valid voltage for high voltage cards is 2.7v to 3.6v. This patch ensures that 2.7v to 3.6v VDD range is treated as valid range. Also, failure to set the power class shouldn't be treated as fatal error because even if setting the power class fails, card can still work in default power class. If mmc_select_powerclass() returns error, just print the warning message and go ahead with rest of the card initialization. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-03 13:55:58 +07:00
if (err)
mmc: core: Revert "skip card initialization if power class selection fails" This reverts commit 3d93576e(skip card initialization if power class selection fails). Problem has been reported when this is used with eMMC4.41 card with Tegra Platform. Till the issue is root caused, bus width selection failure should not be treated as fatal. Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-Off-by: Venkatraman S <svenkatr@ti.com> CC: Ulf Hansson <ulf.hansson@stericsson.com> CC: Subhash Jadavani <subhashj@codeaurora.org> CC: Saugata Das <saugata.das@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-02 13:56:34 +07:00
pr_warning("%s: power class selection to bus width %d"
" failed\n", mmc_hostname(card->host),
1 << bus_width);
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
}
mmc: separate out reading EXT_CSD Separate the reading and decoding of the EXT_CSD register with the actions taken on it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 20:08:30 +07:00
/*
mmc: Fixes for Dual Data Rate (DDR) support The DDR support patch needs the following fixes: - The block driver does not need to know about DDR, any more than it needs to know about bus width. - Not only the card must be switched to DDR mode. The host controller must also be configured, which is done through the 'set_ios()' function. - Do not set the DDR mode state until after the switch command is successful. - Setting block length is not supported in DDR mode. Make that a core function and change the other place it is used (mmc_test) also. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-08-24 17:20:26 +07:00
* Activate wide bus and DDR (if supported).
mmc: separate out reading EXT_CSD Separate the reading and decoding of the EXT_CSD register with the actions taken on it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 20:08:30 +07:00
*/
mmc: core: HS200 mode support for eMMC 4.5 This patch adds the support of the HS200 bus speed for eMMC 4.5 devices. The eMMC 4.5 devices have support for 200MHz bus speed. The function prototype of the tuning function is modified to handle the tuning command number which is different in sd and mmc case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-12 02:04:52 +07:00
if (!mmc_card_hs200(card) &&
mmc: core: Fix low speed mmc card detection failure This patch fixes the failure of low speed mmc card detection. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-19 10:26:19 +07:00
(card->csd.mmca_vsn >= CSD_SPEC_VER_4) &&
mmc: Add 8-bit bus width support Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-11-17 19:35:21 +07:00
(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) {
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
static unsigned ext_csd_bits[][2] = {
{ EXT_CSD_BUS_WIDTH_8, EXT_CSD_DDR_BUS_WIDTH_8 },
{ EXT_CSD_BUS_WIDTH_4, EXT_CSD_DDR_BUS_WIDTH_4 },
{ EXT_CSD_BUS_WIDTH_1, EXT_CSD_BUS_WIDTH_1 },
};
static unsigned bus_widths[] = {
MMC_BUS_WIDTH_8,
MMC_BUS_WIDTH_4,
MMC_BUS_WIDTH_1
};
unsigned idx, bus_width = 0;
if (host->caps & MMC_CAP_8_BIT_DATA)
idx = 0;
else
idx = 1;
for (; idx < ARRAY_SIZE(bus_widths); idx++) {
bus_width = bus_widths[idx];
if (bus_width == MMC_BUS_WIDTH_1)
ddr = 0; /* no DDR for 1-bit width */
mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 22:11:47 +07:00
err = mmc_select_powerclass(card, ext_csd_bits[idx][0],
ext_csd);
if (err)
mmc: core: Revert "skip card initialization if power class selection fails" This reverts commit 3d93576e(skip card initialization if power class selection fails). Problem has been reported when this is used with eMMC4.41 card with Tegra Platform. Till the issue is root caused, bus width selection failure should not be treated as fatal. Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-Off-by: Venkatraman S <svenkatr@ti.com> CC: Ulf Hansson <ulf.hansson@stericsson.com> CC: Subhash Jadavani <subhashj@codeaurora.org> CC: Saugata Das <saugata.das@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-02 13:56:34 +07:00
pr_warning("%s: power class selection to "
"bus width %d failed\n",
mmc_hostname(card->host),
1 << bus_width);
mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 22:11:47 +07:00
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_BUS_WIDTH,
mmc: core: Allow setting CMD timeout for CMD6 (SWITCH). CMD6 is an R1B-type command, where DAT is used as busy. Depending on register written using CMD6, timeout value can be different as per spec. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-12 04:13:43 +07:00
ext_csd_bits[idx][0],
mmc: core: Add default timeout value for CMD6 EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 12:15:29 +07:00
card->ext_csd.generic_cmd6_time);
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
if (!err) {
mmc: core: add support for eMMC Dual Data Rate eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-13 12:47:18 +07:00
mmc_set_bus_width(card->host, bus_width);
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
/*
* If controller can't handle bus width test,
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
* compare ext_csd previously read in 1 bit mode
* against ext_csd at new bus width
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
*/
if (!(host->caps & MMC_CAP_BUS_WIDTH_TEST))
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
err = mmc_compare_ext_csds(card,
bus_width);
else
err = mmc_bus_test(card, bus_width);
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
if (!err)
break;
}
mmc: Add 8-bit bus width support Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2008-11-17 19:35:21 +07:00
}
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
if (!err && ddr) {
mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 22:11:47 +07:00
err = mmc_select_powerclass(card, ext_csd_bits[idx][1],
ext_csd);
if (err)
mmc: core: Revert "skip card initialization if power class selection fails" This reverts commit 3d93576e(skip card initialization if power class selection fails). Problem has been reported when this is used with eMMC4.41 card with Tegra Platform. Till the issue is root caused, bus width selection failure should not be treated as fatal. Reported-by: Marc Dietrich <marvin24@gmx.de> Signed-Off-by: Venkatraman S <svenkatr@ti.com> CC: Ulf Hansson <ulf.hansson@stericsson.com> CC: Subhash Jadavani <subhashj@codeaurora.org> CC: Saugata Das <saugata.das@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-07-02 13:56:34 +07:00
pr_warning("%s: power class selection to "
"bus width %d ddr %d failed\n",
mmc_hostname(card->host),
1 << bus_width, ddr);
mmc: core: eMMC 4.5 Power Class Selection Feature This patch adds the power class selection feature available for mmc versions 4.0 and above. During the enumeration stage before switching to the lower data bus, check if the power class is supported for the current bus width. If the power class is available then switch to the power class and use the higher data bus. If power class is not supported then switch to the lower data bus in a worst case. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 22:11:47 +07:00
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
mmc: core: Allow setting CMD timeout for CMD6 (SWITCH). CMD6 is an R1B-type command, where DAT is used as busy. Depending on register written using CMD6, timeout value can be different as per spec. Signed-off-by: Andrei Warkentin <andreiw@motorola.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-04-12 04:13:43 +07:00
EXT_CSD_BUS_WIDTH,
ext_csd_bits[idx][1],
mmc: core: Add default timeout value for CMD6 EXT_CSD[248] includes the default maximum timeout for CMD6. This field is added at eMMC4.5 Spec. And it can be used for default timeout except for some operations which don't define the timeout (i.e. background operation, sanitize, flush cache) in eMMC4.5 Spec. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-23 12:15:29 +07:00
card->ext_csd.generic_cmd6_time);
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
}
mmc: check status after MMC SWITCH command According to the standard, the SWITCH command should be followed by a SEND_STATUS command to check for errors. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:37 +07:00
if (err) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_warning("%s: switch to bus width %d ddr %d "
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
"failed\n", mmc_hostname(card->host),
1 << bus_width, ddr);
goto free_card;
} else if (ddr) {
mmc: core: add support for eMMC Dual Data Rate eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-13 12:47:18 +07:00
/*
* eMMC cards can support 3.3V to 1.2V i/o (vccq)
* signaling.
*
* EXT_CSD_CARD_TYPE_DDR_1_8V means 3.3V or 1.8V vccq.
*
* 1.8V vccq at 3.3V core voltage (vcc) is not required
* in the JEDEC spec for DDR.
*
* Do not force change in vccq since we are obviously
* working and no change to vccq is needed.
*
* WARNING: eMMC rules are NOT the same as SD DDR
*/
mmc: core: Fix voltage select in DDR mode This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Philip Rakity <prakity@marvell.com> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-15 18:57:42 +07:00
if (ddr == MMC_1_2V_DDR_MODE) {
mmc: core: Break out start_signal_voltage_switch Allow callers to access the start_signal_voltage_switch host_ops member without going through any cmd11 logic. This is mostly a preparation for the following signal voltage switch patch. Also, reset ios.signal_voltage to its original value if start_signal_voltage_switch fails. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-01-28 21:08:27 +07:00
err = __mmc_set_signal_voltage(host,
MMC_SIGNAL_VOLTAGE_120);
mmc: core: add support for eMMC Dual Data Rate eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-13 12:47:18 +07:00
if (err)
goto err;
}
mmc: Test bus-width for old MMC devices Some old MMC devices fail with the 4/8 bits the driver tries to use exclusively. This patch adds a test for the given bus setup and falls back to the lower bit mode (until 1-bit mode) when the test fails. [Major rework and refactoring by tiwai] [Quirk addition and many fixes by prakity] Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Philip Rakity <prakity@marvell.com> Tested-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-15 14:14:24 +07:00
mmc_card_set_ddr_mode(card);
mmc: core: add support for eMMC Dual Data Rate eMMC voltage change not required for 1.8V. 3.3V and 1.8V vcc are capable of doing DDR. vccq of 1.8v is not required. Signed-off-by: Philip Rakity <prakity@marvell.com> Reviewed-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-13 12:47:18 +07:00
mmc_set_timing(card->host, MMC_TIMING_UHS_DDR50);
mmc_set_bus_width(card->host, bus_width);
mmc: check status after MMC SWITCH command According to the standard, the SWITCH command should be followed by a SEND_STATUS command to check for errors. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:37 +07:00
}
mmc: separate out reading EXT_CSD Separate the reading and decoding of the EXT_CSD register with the actions taken on it. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 20:08:30 +07:00
}
mmc: core: hs200 fixes This patch fixes following issues when HS200 is enabled: 1. If executing_tuning() host ops is called without mmc_host_clk_hold(), card clocks might get turned off (if MMC_CLK_GATING is enabled) while execute_tuning() is in progress. So this patch makes sure that execute_tuning() is called with mmc_host_clk_hold(). 2. If host timing mode is set to HS200 mode, there should not be any communication with the card until execute_tuning() is completed. But there is a chance that CMD6 might be sent to enable set HPI_EN (of HPI_MGMT field in EXT_CSD) before execute_tuning() is called. So this patch moves this operation after execute_tuning() is completed. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: girish.shivananjappa@linaro.org Signed-off-by: Chris Ball <cjb@laptop.org>
2012-03-06 19:29:12 +07:00
/*
* Enable HPI feature (if supported)
*/
if (card->ext_csd.hpi) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_HPI_MGMT, 1,
card->ext_csd.generic_cmd6_time);
if (err && err != -EBADMSG)
goto free_card;
if (err) {
pr_warning("%s: Enabling HPI failed\n",
mmc_hostname(card->host));
err = 0;
} else
card->ext_csd.hpi_en = 1;
}
mmc: core: Add cache control for eMMC4.5 device This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-14 12:03:21 +07:00
/*
* If cache size is higher than 0, this indicates
* the existence of cache and it can be turned on.
*/
if ((host->caps2 & MMC_CAP2_CACHE_CTRL) &&
card->ext_csd.cache_size > 0) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
mmc: core: Separate the timeout value for cache-ctrl Turning the cache off implies flushing cache which doesn't define maximum timeout unlike cache-on. This patch will apply the generic CMD6 timeout only for cache-on. Additionally the kernel message is added for checking failure case of cache-on. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-09 15:47:17 +07:00
EXT_CSD_CACHE_CTRL, 1,
card->ext_csd.generic_cmd6_time);
mmc: core: Add cache control for eMMC4.5 device This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-14 12:03:21 +07:00
if (err && err != -EBADMSG)
goto free_card;
/*
* Only if no error, cache is turned on successfully.
*/
mmc: core: Separate the timeout value for cache-ctrl Turning the cache off implies flushing cache which doesn't define maximum timeout unlike cache-on. This patch will apply the generic CMD6 timeout only for cache-on. Additionally the kernel message is added for checking failure case of cache-on. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-12-09 15:47:17 +07:00
if (err) {
pr_warning("%s: Cache is supported, "
"but failed to turn on (%d)\n",
mmc_hostname(card->host), err);
card->ext_csd.cache_ctrl = 0;
err = 0;
} else {
card->ext_csd.cache_ctrl = 1;
}
mmc: core: Add cache control for eMMC4.5 device This patch adds cache feature of eMMC4.5 Spec. If device supports cache capability, host can utilize some specific operations. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-14 12:03:21 +07:00
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
if (!oldcard)
host->card = card;
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
mmc_free_ext_csd(ext_csd);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
return 0;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
free_card:
if (!oldcard)
mmc_remove_card(card);
err:
mmc: core: eMMC bus width may not work on all platforms CMD19 -- The offical way to validate bus widths from the JEDEC spec does not work on all platforms. Some platforms that use PCI/PCIe to connect their SD controllers are known to fail. If the quirk MMC_BUS_WIDTH_TEST is not defined we try to figure out the bus width by reading the ext_csd at different bus widths and compare this against the ext_csd read in 1 bit mode. If no ext_csd is available we default to 1 bit operations. Code has been tested on mmp2 against 8 bit eMMC and Transcend 2GB card that is known to not work in 4 bit mode. The physical pins on the card are not present to support 4 bit operation. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-05-25 08:14:58 +07:00
mmc_free_ext_csd(ext_csd);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
return err;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
}
mmc: core: Fixup broken suspend and eMMC4.5 power off notify This patch fixes up the broken suspend sequence for eMMC with sleep support. Additionally it reworks the eMMC4.5 Power Off Notification feature so it fits together with the existing sleep feature. The CMD0 based re-initialization of the eMMC at resume is re-introduced to maintain compatiblity for devices using sleep. A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off Notification feature. We might be able to remove this cap later on, if we think that Power Off Notification always is preferred over sleep, even if the host is not able to cut the eMMC VCCQ power. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saugata Das <saugata.das@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-05 23:45:39 +07:00
static int mmc_can_poweroff_notify(const struct mmc_card *card)
{
return card &&
mmc_card_mmc(card) &&
(card->ext_csd.power_off_notification == EXT_CSD_POWER_ON);
}
static int mmc_poweroff_notify(struct mmc_card *card, unsigned int notify_type)
{
unsigned int timeout = card->ext_csd.generic_cmd6_time;
int err;
/* Use EXT_CSD_POWER_OFF_SHORT as default notification type. */
if (notify_type == EXT_CSD_POWER_OFF_LONG)
timeout = card->ext_csd.power_off_longtime;
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
EXT_CSD_POWER_OFF_NOTIFICATION,
notify_type, timeout);
if (err)
pr_err("%s: Power Off Notification timed out, %u\n",
mmc_hostname(card->host), timeout);
/* Disable the power off notification after the switch operation. */
card->ext_csd.power_off_notification = EXT_CSD_NO_POWER_NOTIFICATION;
return err;
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
/*
* Host is being removed. Free up the current card.
*/
static void mmc_remove(struct mmc_host *host)
{
BUG_ON(!host);
BUG_ON(!host->card);
mmc_remove_card(host->card);
host->card = NULL;
}
mmc: allow upper layers to know immediately if card has been removed Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-28 21:22:00 +07:00
/*
* Card detection - card is alive.
*/
static int mmc_alive(struct mmc_host *host)
{
return mmc_send_status(host->card, NULL);
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
/*
* Card detection callback from host.
*/
static void mmc_detect(struct mmc_host *host)
{
int err;
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
/*
* Just check if our card has been removed.
*/
mmc: allow upper layers to know immediately if card has been removed Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-28 21:22:00 +07:00
err = _mmc_detect_card_removed(host);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
mmc_release_host(host);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
if (err) {
mmc: refactor bus operations Move bus operations to its own file for the sake of clarity. Also delegate sysfs attributes to bus handlers in preparation for other more exotic types. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-19 18:39:01 +07:00
mmc_remove(host);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
mmc_claim_host(host);
mmc_detach_bus(host);
mmc: core: Fix hangs related to insert/remove of cards During a rescan operation mmc_attach(sd|mmc|sdio) functions are called. The error handling in these function can trigger a detach of the bus, which also meant a power off. This is not notified by the rescan operation which then continues to the next attach function. If a power off has been done, the framework must never send any new commands to the host driver, without first doing a new power up. This will most likely trigger any host driver to hang. Moving power off out of detach and instead handle power off separately when it is actually needed, solves the issue. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: <stable@kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-22 01:08:13 +07:00
mmc_power_off(host);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
mmc_release_host(host);
}
}
/*
* Suspend callback from host.
*/
mmc: propagate error codes back from bus drivers' suspend/resume methods Especially for SDIO drivers which may have special conditions/errors to report, it is a good thing to relay the returned error code back to upper layers. This also allows for the rationalization of the resume path where code to "remove" a no-longer-existing or replaced card was duplicated into the MMC, SD and SDIO bus drivers. In the SDIO case, if a function suspend method returns an error, then all previously suspended functions are resumed and the error returned. An exception is made for -ENOSYS which the core interprets as "we don't support suspend so just kick the card out for suspend and return success". When resuming SDIO cards, the core code only validates the manufacturer and product IDs to make sure the same kind of card is still present before invoking functions resume methods. It's the function driver's responsibility to perform further tests to confirm that the actual same card is present (same MAC address, etc.) and return an error otherwise. Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:29 +07:00
static int mmc_suspend(struct mmc_host *host)
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
{
mmc: core: Put eMMC in Sleep mode before suspend Put MMC to sleep if it supports SLEEP/AWAKE (CMD5) in the mmc suspend so that Vcc (NAND core) can be cut to minimize power consumption. eMMC put into SLEEP can respond to CMD0 or H/W reset or CMD5. Current implemention on resume from suspend relies on CMD0 in mmc_init_card to get out of SLEEP mode. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-08 23:38:39 +07:00
int err = 0;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
BUG_ON(!host);
BUG_ON(!host->card);
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
mmc_claim_host(host);
mmc: core: move the cache disabling operation to mmc_suspend Cache control is an eMMC feature and in therefore should be part of MMC's bus resume operations, performed in mmc_suspend, rather than in the generic mmc_suspend_host(). Signed-off-by: Maya Erez <merez@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-01-29 04:44:22 +07:00
err = mmc_cache_ctrl(host, 0);
if (err)
goto out;
mmc: core: Fixup broken suspend and eMMC4.5 power off notify This patch fixes up the broken suspend sequence for eMMC with sleep support. Additionally it reworks the eMMC4.5 Power Off Notification feature so it fits together with the existing sleep feature. The CMD0 based re-initialization of the eMMC at resume is re-introduced to maintain compatiblity for devices using sleep. A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off Notification feature. We might be able to remove this cap later on, if we think that Power Off Notification always is preferred over sleep, even if the host is not able to cut the eMMC VCCQ power. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saugata Das <saugata.das@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-05 23:45:39 +07:00
if (mmc_can_poweroff_notify(host->card))
err = mmc_poweroff_notify(host->card, EXT_CSD_POWER_OFF_SHORT);
else if (mmc_card_can_sleep(host))
mmc: core: Put eMMC in Sleep mode before suspend Put MMC to sleep if it supports SLEEP/AWAKE (CMD5) in the mmc suspend so that Vcc (NAND core) can be cut to minimize power consumption. eMMC put into SLEEP can respond to CMD0 or H/W reset or CMD5. Current implemention on resume from suspend relies on CMD0 in mmc_init_card to get out of SLEEP mode. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-08 23:38:39 +07:00
err = mmc_card_sleep(host);
mmc: core: Fixup broken suspend and eMMC4.5 power off notify This patch fixes up the broken suspend sequence for eMMC with sleep support. Additionally it reworks the eMMC4.5 Power Off Notification feature so it fits together with the existing sleep feature. The CMD0 based re-initialization of the eMMC at resume is re-introduced to maintain compatiblity for devices using sleep. A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off Notification feature. We might be able to remove this cap later on, if we think that Power Off Notification always is preferred over sleep, even if the host is not able to cut the eMMC VCCQ power. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saugata Das <saugata.das@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-05 23:45:39 +07:00
else if (!mmc_host_is_spi(host))
mmc: core: return an error on suspend if mmc_deselect_cards fails When mmc_host is not spi mode, mmc/sd is doing mmc_deselect_cards(). mmc_deselect_cards could be returned error. If returned error, we can know something wrong when enter suspend. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-05-31 18:31:47 +07:00
err = mmc_deselect_cards(host);
mmc: core: Fix PowerOff Notify suspend/resume Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Tested-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Saugata Das <saugata.das@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-31 17:14:03 +07:00
host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc: propagate error codes back from bus drivers' suspend/resume methods Especially for SDIO drivers which may have special conditions/errors to report, it is a good thing to relay the returned error code back to upper layers. This also allows for the rationalization of the resume path where code to "remove" a no-longer-existing or replaced card was duplicated into the MMC, SD and SDIO bus drivers. In the SDIO case, if a function suspend method returns an error, then all previously suspended functions are resumed and the error returned. An exception is made for -ENOSYS which the core interprets as "we don't support suspend so just kick the card out for suspend and return success". When resuming SDIO cards, the core code only validates the manufacturer and product IDs to make sure the same kind of card is still present before invoking functions resume methods. It's the function driver's responsibility to perform further tests to confirm that the actual same card is present (same MAC address, etc.) and return an error otherwise. Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:29 +07:00
mmc: core: move the cache disabling operation to mmc_suspend Cache control is an eMMC feature and in therefore should be part of MMC's bus resume operations, performed in mmc_suspend, rather than in the generic mmc_suspend_host(). Signed-off-by: Maya Erez <merez@codeaurora.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-01-29 04:44:22 +07:00
out:
mmc_release_host(host);
mmc: core: Put eMMC in Sleep mode before suspend Put MMC to sleep if it supports SLEEP/AWAKE (CMD5) in the mmc suspend so that Vcc (NAND core) can be cut to minimize power consumption. eMMC put into SLEEP can respond to CMD0 or H/W reset or CMD5. Current implemention on resume from suspend relies on CMD0 in mmc_init_card to get out of SLEEP mode. Signed-off-by: Balaji T K <balajitk@ti.com> Acked-by: Venkatraman S <svenkatr@ti.com> Reviewed-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-08 23:38:39 +07:00
return err;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
}
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
/*
* Resume callback from host.
*
* This function tries to determine if the same card is still present
* and, if so, restore all state to it.
*/
mmc: propagate error codes back from bus drivers' suspend/resume methods Especially for SDIO drivers which may have special conditions/errors to report, it is a good thing to relay the returned error code back to upper layers. This also allows for the rationalization of the resume path where code to "remove" a no-longer-existing or replaced card was duplicated into the MMC, SD and SDIO bus drivers. In the SDIO case, if a function suspend method returns an error, then all previously suspended functions are resumed and the error returned. An exception is made for -ENOSYS which the core interprets as "we don't support suspend so just kick the card out for suspend and return success". When resuming SDIO cards, the core code only validates the manufacturer and product IDs to make sure the same kind of card is still present before invoking functions resume methods. It's the function driver's responsibility to perform further tests to confirm that the actual same card is present (same MAC address, etc.) and return an error otherwise. Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:29 +07:00
static int mmc_resume(struct mmc_host *host)
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
{
int err;
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
mmc: core: Fixup broken suspend and eMMC4.5 power off notify This patch fixes up the broken suspend sequence for eMMC with sleep support. Additionally it reworks the eMMC4.5 Power Off Notification feature so it fits together with the existing sleep feature. The CMD0 based re-initialization of the eMMC at resume is re-introduced to maintain compatiblity for devices using sleep. A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off Notification feature. We might be able to remove this cap later on, if we think that Power Off Notification always is preferred over sleep, even if the host is not able to cut the eMMC VCCQ power. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Saugata Das <saugata.das@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-10-05 23:45:39 +07:00
err = mmc_init_card(host, host->ocr, host->card);
mmc: Don't hold lock when releasing an added card When the card has been added to the device model, it might be bound to a card driver. Therefore, we have to release the host lock when trying to remove it as we otherwise might deadlock with the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-22 22:52:06 +07:00
mmc_release_host(host);
mmc: propagate error codes back from bus drivers' suspend/resume methods Especially for SDIO drivers which may have special conditions/errors to report, it is a good thing to relay the returned error code back to upper layers. This also allows for the rationalization of the resume path where code to "remove" a no-longer-existing or replaced card was duplicated into the MMC, SD and SDIO bus drivers. In the SDIO case, if a function suspend method returns an error, then all previously suspended functions are resumed and the error returned. An exception is made for -ENOSYS which the core interprets as "we don't support suspend so just kick the card out for suspend and return success". When resuming SDIO cards, the core code only validates the manufacturer and product IDs to make sure the same kind of card is still present before invoking functions resume methods. It's the function driver's responsibility to perform further tests to confirm that the actual same card is present (same MAC address, etc.) and return an error otherwise. Signed-off-by: Nicolas Pitre <nico@marvell.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:45:29 +07:00
return err;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
}
mmc: propagate power save/restore ops return value Allow power save/restore and their relevant mmc_bus_ops handlers exit with a return value. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-02 18:54:06 +07:00
static int mmc_power_restore(struct mmc_host *host)
mmc: add ability to save power by powering off cards Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:33 +07:00
{
mmc: propagate power save/restore ops return value Allow power save/restore and their relevant mmc_bus_ops handlers exit with a return value. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-02 18:54:06 +07:00
int ret;
mmc: core: Fix PowerOff Notify suspend/resume Modified the mmc_poweroff to resume before sending the poweroff notification command. In sleep mode only AWAKE and RESET commands are allowed, so before sending the poweroff notification command resume from sleep mode and then send the notification command. PowerOff Notify is tested on a Synopsis Designware Host Controller (eMMC 4.5). The suspend to RAM and resume works fine. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Tested-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Saugata Das <saugata.das@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-01-31 17:14:03 +07:00
host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc: add ability to save power by powering off cards Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:33 +07:00
mmc_claim_host(host);
mmc: propagate power save/restore ops return value Allow power save/restore and their relevant mmc_bus_ops handlers exit with a return value. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-02 18:54:06 +07:00
ret = mmc_init_card(host, host->ocr, host->card);
mmc: add ability to save power by powering off cards Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:33 +07:00
mmc_release_host(host);
mmc: propagate power save/restore ops return value Allow power save/restore and their relevant mmc_bus_ops handlers exit with a return value. Signed-off-by: Ohad Ben-Cohen <ohad@wizery.com> Tested-by: Luciano Coelho <luciano.coelho@nokia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-10-02 18:54:06 +07:00
return ret;
mmc: add ability to save power by powering off cards Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:33 +07:00
}
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
static int mmc_sleep(struct mmc_host *host)
{
struct mmc_card *card = host->card;
int err = -ENOSYS;
if (card && card->ext_csd.rev >= 3) {
err = mmc_card_sleepawake(host, 1);
if (err < 0)
pr_debug("%s: Error %d while putting card into sleep",
mmc_hostname(host), err);
}
return err;
}
static int mmc_awake(struct mmc_host *host)
{
struct mmc_card *card = host->card;
int err = -ENOSYS;
if (card && card->ext_csd.rev >= 3) {
err = mmc_card_sleepawake(host, 0);
if (err < 0)
pr_debug("%s: Error %d while awaking sleeping card",
mmc_hostname(host), err);
}
return err;
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
static const struct mmc_bus_ops mmc_ops = {
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
.awake = mmc_awake,
.sleep = mmc_sleep,
mmc: add MMC_CAP_NONREMOVABLE host capability eMMC's are not removable, so unsafe resume is OK always. To permit this a new host capability MMC_CAP_NONREMOVABLE has been added and suspend / resume updated accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:32 +07:00
.remove = mmc_remove,
.detect = mmc_detect,
.suspend = NULL,
.resume = NULL,
mmc: add ability to save power by powering off cards Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:33 +07:00
.power_restore = mmc_power_restore,
mmc: allow upper layers to know immediately if card has been removed Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-28 21:22:00 +07:00
.alive = mmc_alive,
mmc: add MMC_CAP_NONREMOVABLE host capability eMMC's are not removable, so unsafe resume is OK always. To permit this a new host capability MMC_CAP_NONREMOVABLE has been added and suspend / resume updated accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:32 +07:00
};
static const struct mmc_bus_ops mmc_ops_unsafe = {
mmc: add mmc card sleep and awake support Add support for the new MMC command SLEEP_AWAKE. Signed-off-by: Jarkko Lavinen <jarkko.lavinen@nokia.com> Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:34 +07:00
.awake = mmc_awake,
.sleep = mmc_sleep,
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
.remove = mmc_remove,
.detect = mmc_detect,
.suspend = mmc_suspend,
.resume = mmc_resume,
mmc: add ability to save power by powering off cards Power can be saved by powering off cards that are not in use. This is similar to suspend / resume except it is under the control of the driver, and does not require any power management support. It can only be used when the driver can monitor whether the card is removed, otherwise it is unsafe. This is possible because, unlike suspend, the driver still receives card detect and / or cover switch interrupts. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:33 +07:00
.power_restore = mmc_power_restore,
mmc: allow upper layers to know immediately if card has been removed Add a function mmc_detect_card_removed() which upper layers can use to determine immediately if a card has been removed. This function should be called after an I/O request fails so that all queued I/O requests can be errored out immediately instead of waiting for the card device to be removed. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Sujit Reddy Thumma <sthumma@codeaurora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-11-28 21:22:00 +07:00
.alive = mmc_alive,
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
};
mmc: add MMC_CAP_NONREMOVABLE host capability eMMC's are not removable, so unsafe resume is OK always. To permit this a new host capability MMC_CAP_NONREMOVABLE has been added and suspend / resume updated accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:32 +07:00
static void mmc_attach_bus_ops(struct mmc_host *host)
{
const struct mmc_bus_ops *bus_ops;
mmc: Add helper function to check if a card is removable There are two checks that need to be made when determining whether a card is removable. A host controller may set MMC_CAP_NONREMOVABLE if the controller does not support removing cards (e.g. eMMC), in which case the card is physically non-removable. Also the 'mmc_assume_removable' module parameter can be configured at module load time, in which case the card may be logically non-removable. A helper function keeps the logic in one place so that code always checks both conditions. Because this new function is likely to be called from modules we now need to export the mmc_assume_removable symbol. Signed-off-by: Matt Fleming <matt@console-pimps.org> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Tested-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-09-27 15:42:19 +07:00
if (!mmc_card_is_removable(host))
mmc: add MMC_CAP_NONREMOVABLE host capability eMMC's are not removable, so unsafe resume is OK always. To permit this a new host capability MMC_CAP_NONREMOVABLE has been added and suspend / resume updated accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:32 +07:00
bus_ops = &mmc_ops_unsafe;
else
bus_ops = &mmc_ops;
mmc_attach_bus(host, bus_ops);
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
/*
* Starting point for MMC card init.
*/
mmc: Fix sd/sdio/mmc initialization frequency retries Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-04 01:36:56 +07:00
int mmc_attach_mmc(struct mmc_host *host)
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
{
int err;
mmc: Fix sd/sdio/mmc initialization frequency retries Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-04 01:36:56 +07:00
u32 ocr;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
BUG_ON(!host);
mmc: replace BUG_ON with WARN_ON Replace all cases of BUG_ON with WARN_ON where there is a chance (with varying degrees of slim) that the kernel can continue without incidence. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-09 18:23:56 +07:00
WARN_ON(!host->claimed);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
mmc: core: Set correct bus mode before card init Earlier all cards where initiated with bus mode set as OPENDRAIN, and then later switched to PUSHPULL. According to the MMC/SD/SDIO specifications only MMC cards use OPENDRAIN during init. For both SD and SDIO the bus mode shall be PUSHPULL before attempting to init the card. The consequence of having incorrect bus mode can lead to not being able to detect the card. Therefore the default behavior have now been changed to PUSHPULL in mmc_power_up, and will only be temporarily switched when trying to attach or init a MMC card. Signed-off-by: Stefan Nilsson XK <stefan.xk.nilsson@stericsson.com> Signed-off-by: Ulf HANSSON <ulf.hansson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-09-15 22:50:38 +07:00
/* Set correct bus mode for MMC before attempting attach */
if (!mmc_host_is_spi(host))
mmc_set_bus_mode(host, MMC_BUSMODE_OPENDRAIN);
mmc: Fix sd/sdio/mmc initialization frequency retries Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-04 01:36:56 +07:00
err = mmc_send_op_cond(host, 0, &ocr);
if (err)
return err;
mmc: add MMC_CAP_NONREMOVABLE host capability eMMC's are not removable, so unsafe resume is OK always. To permit this a new host capability MMC_CAP_NONREMOVABLE has been added and suspend / resume updated accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@nokia.com> Acked-by: Matt Fleming <matt@console-pimps.org> Cc: Ian Molton <ian@mnementh.co.uk> Cc: "Roberto A. Foglietta" <roberto.foglietta@gmail.com> Cc: Jarkko Lavinen <jarkko.lavinen@nokia.com> Cc: Denis Karpov <ext-denis.2.karpov@nokia.com> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Philip Langdale <philipl@overt.org> Cc: "Madhusudhan" <madhu.cr@ti.com> Cc: <linux-mmc@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23 06:44:32 +07:00
mmc_attach_bus_ops(host);
mmc: Add support for JMicron 388 SD/MMC controller JMicron 388 SD/MMC combo controller supports the 1.8V low-voltage for SD, but MMC doesn't work with the low-voltage, resulting in an error at probing. This patch adds the support for multiple voltage mask per device type, so that SD works with 1.8V while MMC forces 3.3V. Here new ocr_avail_* fields for each device are introduced, so that the actual OCR mask is switched dynamically. Also, the restriction of low-voltage in core/sd.c is removed when the bit is allowed explicitly via ocr_avail_sd mask. This patch was rewritten from scratch based on Aries' original code. Signed-off-by: Aries Lee <arieslee@jmicron.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2010-12-08 16:04:30 +07:00
if (host->ocr_avail_mmc)
host->ocr_avail = host->ocr_avail_mmc;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
MMC core learns about SPI Teach the MMC/SD/SDIO core about using SPI mode. - Use mmc_host_is_spi() so enumeration works through SPI signaling and protocols, not just the native versions. - Provide the SPI response type flags with each request issued, including requests from the new lock/unlock code. - Understand that cmd->resp[0] and mmc_get_status() results for SPI return different values than for "native" MMC/SD protocol; this affects resetting, checking card lock status, and some others. - Understand that some commands act a bit differently ... notably: * OP_COND command doesn't return the OCR * APP_CMD status doesn't have an R1_APP_CMD analogue Those changes required some new and updated primitives: - Provide utilities to access two SPI-only requests, and one request that wasn't previously needed: * mmc_spi_read_ocr() ... SPI only * mmc_spi_set_crc() ... SPI only (override by module parm) * mmc_send_cid() ... for use without broadcast mode - Updated internal routines: * Previous mmc_send_csd() modified into mmc_send_cxd_native(); it uses native "R2" responses, which include 16 bytes of data. * Previous mmc_send_ext_csd() becomes new mmc_send_cxd_data() helper for command-and-data access * Bugfix to that mmc_send_cxd_data() code: dma-to-stack is unsafe/nonportable, so kmalloc a bounce buffer instead. - Modified mmc_send_ext_csd() now uses mmc_send_cxd_data() helper - Modified mmc_send_csd(), and new mmc_spi_send_cid(), routines use those helper routines based on whether they're native or SPI The newest categories of cards supported by the MMC stack aren't expected to work yet with SPI: MMC or SD cards with over 4GB data, and SDIO. All those cards support SPI mode, so eventually they should work too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-08-08 23:11:32 +07:00
/*
* We need to get OCR a different way for SPI.
*/
if (mmc_host_is_spi(host)) {
err = mmc_spi_read_ocr(host, 1, &ocr);
if (err)
goto err;
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
/*
* Sanity check the voltages that the card claims to
* support.
*/
if (ocr & 0x7F) {
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_warning("%s: card claims to support voltages "
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
"below the defined range. These will be ignored.\n",
mmc_hostname(host));
ocr &= ~0x7F;
}
host->ocr = mmc_select_voltage(host, ocr);
/*
* Can we support the voltage of the card?
*/
mmc: be more verbose about card insertions/removal Let the user know that the kernel actually detected the card by printing some basic information in dmesg. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 05:12:10 +07:00
if (!host->ocr) {
err = -EINVAL;
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
goto err;
mmc: be more verbose about card insertions/removal Let the user know that the kernel actually detected the card by printing some basic information in dmesg. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 05:12:10 +07:00
}
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
/*
* Detect and init the card.
*/
mmc: fix silly copy-and-paste error Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-19 21:14:43 +07:00
err = mmc_init_card(host, host->ocr, NULL);
mmc: remove custom error codes Convert the MMC layer to use standard error codes and not its own, incompatible values. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 03:18:46 +07:00
if (err)
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
goto err;
mmc_release_host(host);
mmc: refactor bus operations Move bus operations to its own file for the sake of clarity. Also delegate sysfs attributes to bus handlers in preparation for other more exotic types. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-19 18:39:01 +07:00
err = mmc_add_card(host->card);
mmc: Fix sd/sdio/mmc initialization frequency retries Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-04 01:36:56 +07:00
mmc_claim_host(host);
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
if (err)
mmc: Don't hold lock when releasing an added card When the card has been added to the device model, it might be bound to a card driver. Therefore, we have to release the host lock when trying to remove it as we otherwise might deadlock with the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-22 22:52:06 +07:00
goto remove_card;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
return 0;
mmc: Don't hold lock when releasing an added card When the card has been added to the device model, it might be bound to a card driver. Therefore, we have to release the host lock when trying to remove it as we otherwise might deadlock with the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-22 22:52:06 +07:00
remove_card:
mmc: Fix sd/sdio/mmc initialization frequency retries Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-04 01:36:56 +07:00
mmc_release_host(host);
mmc: support unsafe resume of cards Since many have the system root on MMC/SD we must allow some foot shooting when it comes to resume. We cannot detect if a card is removed and reinserted during suspend, so the safe approach would be to assume it was, avoiding potential filesystem corruption. This will of course not work if you cannot release the card before suspend. This commit adds a compile time option that makes the MMC layer assume the card wasn't touched if it is redetected upon resume. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-05-01 21:00:02 +07:00
mmc_remove_card(host->card);
mmc: Don't hold lock when releasing an added card When the card has been added to the device model, it might be bound to a card driver. Therefore, we have to release the host lock when trying to remove it as we otherwise might deadlock with the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-22 22:52:06 +07:00
mmc_claim_host(host);
mmc: Fix sd/sdio/mmc initialization frequency retries Rewrite and clean up mmc_rescan() to properly retry frequencies lower than 400kHz. Failures can happen both in sd_send_* calls and mmc_attach_*. Break out "mmc_rescan_try_freq" from the frequency selection loop. Symmetrize claim/release logic in mmc_attach_* API, and move the sd_send_* calls there to make mmc_rescan easier to read. Signed-off-by: Andy Ross <andy.ross@windriver.com> Reviewed-and-Tested-by: Hein Tibosch <hein_tibosch@yahoo.es> Reviewed-by: Chris Ball <cjb@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-01-04 01:36:56 +07:00
host->card = NULL;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
err:
mmc_detach_bus(host);
mmc: replace printk with appropriate display macro All the files using printk function for displaying kernel messages in the mmc driver have been replaced with corresponding macro. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2011-10-11 13:14:09 +07:00
pr_err("%s: error %d whilst initialising MMC card\n",
mmc: be more verbose about card insertions/removal Let the user know that the kernel actually detected the card by printing some basic information in dmesg. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 05:12:10 +07:00
mmc_hostname(host), err);
mmc: improve error code feedback Now that we use "normal" error codes, improve the reporting and response to error codes in the core. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2007-07-23 04:08:30 +07:00
return err;
mmc: add bus handler Delegate protocol handling to "bus handlers". This allows the core to just handle the task of arbitrating the bus. Initialisation and pampering of cards is now done by the different bus handlers. This design also allows MMC and SD (and later SDIO) to be more cleanly separated, allowing easier maintenance. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx>
2006-12-31 06:11:32 +07:00
}
Reference in New Issue Copy Permalink