AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-27 10:35:08 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
abdf5135b2
linux_dsm_epyc7002/arch/arm/configs/omap2plus_defconfig

543 lines
12 KiB
Plaintext
Raw Normal View History

arm: config: omap2plus_defconfig: switch over to LZMA compression LZMA compression makes about 33% smaller zImage with just a slight extra decompression time. Before this patch, zImage built with o2+_dc is 4.5MiB and after it's about 3.3MiB. Suggested-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-31 00:18:56 +07:00
CONFIG_KERNEL_LZMA=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_AUDIT=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
omap3: update omap3_defconfig - Update the omap3_defconfig to sync up with the generated .config - Increase CONFIG_LOG_BUF_SHIFT to 16 to allow the entire boot log to be captured (useful when using boot time tracer, for example) Signed-off-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-13 12:32:27 +07:00
CONFIG_LOG_BUF_SHIFT=16
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_CGROUPS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_BLK_CGROUP=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_CGROUP_SCHED=y
CONFIG_CFS_BANDWIDTH=y
CONFIG_RT_GROUP_SCHED=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_CGROUP_FREEZER=y
CONFIG_CPUSETS=y
CONFIG_CGROUP_DEVICE=y
CONFIG_CGROUP_CPUACCT=y
CONFIG_CGROUP_PERF=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_NAMESPACES=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_BLK_DEV_INITRD=y
kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERT The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-21 05:44:16 +07:00
CONFIG_EXPERT=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_SLAB=y
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_MODULES=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_BLK_DEV_BSG is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_PARTITION_ADVANCED=y
ARM: OMAP2+: Add missing CONFIG_ARCH_MULTI_V6=y to omap2plus_defconfig omap2plus_defconfig is missing CONFIG_ARCH_MULTI_V6. This results in undefined instruction traps in u-boot (and boot failures) on OMAP2xxx SoCs, which are ARM11-based. Fix by setting CONFIG_ARCH_MULTI_V6. Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-17 01:25:07 +07:00
CONFIG_ARCH_MULTI_V6=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 07:27:39 +07:00
CONFIG_POWER_AVS_OMAP=y
CONFIG_POWER_AVS_OMAP_CLASS3=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_OMAP_RESET_CLOCKS=y
ARM: OMAP: build mach-omap code only if needed If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the individual SoCs disabled, we run into a large number of link errors because if incorrect dependencies: arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable': arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup' arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable' arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle': arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown': arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup': arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle' arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init': arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init': arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context' We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that gets enabled any time that one of the SoC versions is enabled. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-01 05:02:26 +07:00
CONFIG_ARCH_OMAP2=y
CONFIG_ARCH_OMAP3=y
CONFIG_ARCH_OMAP4=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_SOC_OMAP5=y
ARM: OMAP: build mach-omap code only if needed If we build a kernel with CONFIG_ARCH_OMAP2PLUS enabled but all of the individual SoCs disabled, we run into a large number of link errors because if incorrect dependencies: arch/arm/mach-omap2/built-in.o: In function `_add_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:691: undefined reference to `clkdm_add_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_del_initiator_dep': arch/arm/mach-omap2/omap_hwmod.c:720: undefined reference to `clkdm_del_sleepdep' arch/arm/mach-omap2/built-in.o: In function `_enable': arch/arm/mach-omap2/omap_hwmod.c:2145: undefined reference to `clkdm_in_hwsup' arch/arm/mach-omap2/omap_hwmod.c:2147: undefined reference to `clkdm_hwmod_enable' arch/arm/mach-omap2/omap_hwmod.c:2191: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/omap_hwmod.c:2146: undefined reference to `clkdm_missing_idle_reporting' arch/arm/mach-omap2/built-in.o: In function `_idle': arch/arm/mach-omap2/omap_hwmod.c:2235: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `_shutdown': arch/arm/mach-omap2/omap_hwmod.c:2338: undefined reference to `clkdm_hwmod_disable' arch/arm/mach-omap2/built-in.o: In function `omap_hwmod_get_context_loss_count': arch/arm/mach-omap2/omap_hwmod.c:4071: undefined reference to `pwrdm_get_context_loss_count' arch/arm/mach-omap2/built-in.o: In function `omap_pm_clkdms_setup': arch/arm/mach-omap2/pm.c:114: undefined reference to `clkdm_allow_idle' arch/arm/mach-omap2/pm.c:117: undefined reference to `clkdm_sleep' arch/arm/mach-omap2/built-in.o: In function `omap2_common_pm_late_init': arch/arm/mach-omap2/pm.c:294: undefined reference to `omap_voltage_late_init' arch/arm/mach-omap2/built-in.o: In function `omap2_gpio_dev_init': arch/arm/mach-omap2/gpio.c:133: undefined reference to `pwrdm_can_ever_lose_context' We can avoid this if we make CONFIG_ARCH_OMAP2PLUS a silent option that gets enabled any time that one of the SoC versions is enabled. Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-05-01 05:02:26 +07:00
CONFIG_SOC_AM33XX=y
ARM: OMAP2+: AM43x: enable in default config Enable AM43x SoC in omap2plus_defconfig Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-02-07 17:21:23 +07:00
CONFIG_SOC_AM43XX=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_SOC_DRA7XX=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_ARM_THUMBEE=y
omap: Update omap3_defconfig for omap2 We need to enable ARM_ERRATA_411920 for omap2 and remove the omap2 specific defconfigs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-21 04:53:38 +07:00
CONFIG_ARM_ERRATA_411920=y
ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-19 16:31:32 +07:00
CONFIG_PCI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_ENDPOINT=y
CONFIG_PCI_ENDPOINT_CONFIGFS=y
CONFIG_PCI_EPF_TEST=m
omap: Update omap3_defconfig to work with SMP_ON_UP With the recent changes to core ARM kernel code, we can now boot SMP kernel on UP systems. Update omap3_defconfig to enable SMP. This allows us to remove omap_4430sdp_defconfig. In addition to enabling SMP, we also need to disable some options to make the system boot: - For some reason LOCK_STAT causes tons of WARNING: at mm/percpu-vm.c:320 pcpu_alloc+0x2fc/0x888() so disable it for now. - MUSB init fails for multi-omap, disable it for now. - LOCAL_TIMERS hangs on omap4, disable it for now. Also disable DEBUG_LL as this should be only enabled for debugging. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-21 04:53:38 +07:00
CONFIG_SMP=y
omap2plus: omap4: Set NR_CPU to 2 instead of default 4 The omap2plus_defconfig picks default NR_CPU value as 4 which isn't correct for OMAP4430. Available CPUs are ony 2, so fix the same. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-02-18 00:55:03 +07:00
CONFIG_NR_CPUS=2
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_CMA=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_SECCOMP=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support As this config must support boards which cannot support separate device trees, enable support for appended ones. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Tom Rini <trini@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-07-01 20:13:13 +07:00
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
omap: Update omap2plus_defconfig to use ttyO instead ttyS With the omap-serial the device has changed from ttyS to ttyO as the system may have both omap-serial and 8250 ports. Note that systems using omap-serial need to be updated to use ttyO[012] instead of ttyS[012] in the bootloader, CONFIG_CMDLINE, /etc/inittab, and the root file system with mknod. Also you may need to add ttyO[012] to /etc/securetty. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-09 00:23:44 +07:00
CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200"
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_KEXEC=y
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:07 +07:00
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_CPUFREQ_DT=m
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:07 +07:00
# CONFIG_ARM_OMAP2PLUS_CPUFREQ is not set
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:29:08 +07:00
CONFIG_ARM_TI_CPUFREQ=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 07:27:39 +07:00
CONFIG_CPU_IDLE=y
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:29:08 +07:00
CONFIG_KERNEL_MODE_NEON=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_BINFMT_MISC=y
CONFIG_PM_DEBUG=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_XFRM_USER=y
CONFIG_NET_KEY=y
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NETFILTER=y
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:48:44 +07:00
CONFIG_PHONET=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_CAN_C_CAN_PLATFORM=m
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 02:07:29 +07:00
CONFIG_BT=m
ARM: omap2plus_defconfig: Update bluetooth options Many omaps have bluetooth, so let's make it available as modules. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:46:59 +07:00
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 02:07:29 +07:00
CONFIG_BT_HCIUART=m
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:47:35 +07:00
CONFIG_BT_HCIUART_NOKIA=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
ARM: omap2plus_defconfig: Update bluetooth options Many omaps have bluetooth, so let's make it available as modules. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:46:59 +07:00
CONFIG_BT_HCIUART_3WIRE=y
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:47:35 +07:00
CONFIG_BT_HCIUART_BCM=y
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 02:07:29 +07:00
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
ARM: omap2plus_defconfig: Update bluetooth options Many omaps have bluetooth, so let's make it available as modules. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:46:59 +07:00
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_BT_MRVL=m
CONFIG_BT_MRVL_SDIO=m
CONFIG_AF_RXRPC=m
ARM: omap2plus_defconfig: Fix warning due invalid RXKAD symbol value Commit 648af7fca159 ("rxrpc: Absorb the rxkad security module") changed the RXKAD Kconfig symbol from tristate to boolean but the commit didn't update the omap2plus_defconfig that was enabling CONFIG_RXKAD as module. This leads to the following warning when using the omap2plus_defconfig: arch/arm/configs/omap2plus_defconfig:112:warning: symbol value 'm' invalid for RXKAD Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-23 00:53:19 +07:00
CONFIG_RXKAD=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_CFG80211=m
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 02:07:29 +07:00
CONFIG_MAC80211=m
ARM: OMAP2+: enable devtmpfs and devtmpfs automount Since udev-182, udev no longer creates device nodes under /dev and this has to be managed by the kernel devtmpfs filesystem. This means that a kernel built with the current OMAP2+ config will not boot on a system with a recent udev. Also, it is good to have /dev automatically mounted since some non-initramfs based setups assumes this and don't manually mount it. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Santosh Shilimkar<santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 02:30:00 +07:00
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_DMA_CMA=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 05:41:25 +07:00
CONFIG_OMAP_OCP2SCP=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_CONNECTOR=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_OOPS=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
ARM: omap2plus_defconfig: Add NOR flash support Some omaps have NOR flash as the rootfs but we're missing physmap and physmap_of to properly support it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-20 00:52:54 +07:00
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_OF=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_MTD_M25P80=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MTD_NAND=y
ARM: omap2plus_defconfig: Fix errors with NAND BCH Looks like we need to have BCH enabled to get NAND working and to avoid getting: nand: error: CONFIG_MTD_NAND_ECC_BCH not enabled Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-28 03:06:07 +07:00
CONFIG_MTD_NAND_ECC_BCH=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MTD_NAND_OMAP2=y
ARM: omap2plus_defconfig: Enable OMAP NAND BCH driver Without this NAND doesn't work on most EVMs. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-23 22:18:36 +07:00
CONFIG_MTD_NAND_OMAP_BCH=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_OMAP2=y
ARM: omap2plus_defconfig: enable support for M25P80 SPI NOR M25P80 driver provides support for most common SPI NOR devices. These devices are commonly found on TI EVMs for AM437x and DRA7x SoCs. Enable support for this driver in defconfig for omap2plus devices. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 22:27:37 +07:00
CONFIG_MTD_SPI_NOR=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_MTD_UBI=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=16384
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_SENSORS_TSL2550=m
ARM: OMAP4+: Move SRAM data to DT Use drivers/misc/sram.c driver to manage SRAM on all DT only OMAP platforms (am33xx, am43xx, omap4 and omap5) instead of the existing private plat-omap/sram.c Address and size related data is removed from mach-omap2/sram.c and now passed to drivers/misc/sram.c from DT. Users can hence use general purpose allocator apis instead of OMAP private ones to manage and use SRAM. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-10 23:04:03 +07:00
CONFIG_SRAM=y
ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe controller present in dra7 SoCs in both host mode and device mode. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-12-19 16:31:32 +07:00
CONFIG_PCI_ENDPOINT_TEST=m
ARM: omap2plus_defconfig: Enable AT24 eeprom AT24 compatible eeproms are used in BB family and X15 boards. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-22 23:51:08 +07:00
CONFIG_EEPROM_AT24=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_SCAN_ASYNC=y
ARM: omap2plus_defconfig: Enable AHCI_PLATFORM driver OMAP5 and DRA7 platforms need the AHCI platform driver for SATA support. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-11-24 18:41:37 +07:00
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
ARM: omap2plus_defconfig: enable ahci-dm816 module This is now supported on the dm8168-evm board, so enable it in the defconfig for omap2+. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-14 18:14:15 +07:00
CONFIG_AHCI_DM816=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_NETDEVICES=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:06:59 +07:00
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CIRRUS is not set
ARM: omap2plus_defconifg: Enable DM9000 in omap2plus_defconfig This ethernet device is used on devkit8000 board. Signed-off-by: Anthoine Bourgeois <anthoine.bourgeois@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-28 03:00:14 +07:00
CONFIG_DM9000=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:06:59 +07:00
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_HISILICON is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
omap: Update and rename common defconfig for omap2plus devices This patch addresses below things - Renaming existing omap3_defconfig which has OMAP2, OMAP3 and OMAP4 builds enabled to more appropriate name 'omap2plus_defconfig' - L1 cache shift is suppose to be 5 on OMAP4 where as it is 6 on previous OMAPs. Keeping it to 5 is safer option for OMAP4 and previous OMAPs. For OMAP3 only build the shift would be still 6 - Enable needed Errata's for OMAP4 to work with DMA based device drivers CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_720789=y - Enable the Micrel ethernet controller CONFIG_KS8851=y CONFIG_KS8851_MLL=y With above three changes, OMAP4 ethernet, mmc etc works reliably. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-16 00:10:19 +07:00
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:06:59 +07:00
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:06:59 +07:00
# CONFIG_NET_VENDOR_STMICRO is not set
ARM: omap2plus_defconfig: Enable support for davinci_emac We have this on at least 3517-evm and dm8168-evm. Let's enable davinci_emac so those can be booted with NFSroot. Cc: Brian Hutchinson <b.hutchman@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-20 00:52:23 +07:00
CONFIG_TI_DAVINCI_EMAC=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_TI_CPSW=y
ARM: omap2plus_defconfig: enable support for TI CPTS CPTS module of CPSW IP enables timestamp synchronization using PTP. Enable CPTS feature of CPSW driver. Available on AM335x, AM437x and DRA7x SoCs. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Acked-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 22:27:36 +07:00
CONFIG_TI_CPTS=y
ARM: omap2plus_defconfig: remove unwanted ethernet drivers None of these drivers are known to be used on any platform supported by omap2plus_defconfig, by removing them we get a slight smaller kernel. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:06:59 +07:00
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_AT803X_PHY=y
ARM: omap2plus_defconfig: Enable TI Ethernet PHY DP83848_PHY i.e. [TI TLK10X 10/100 Mbps PHY] is used on the am335x-icev2 board. Enable the PHY driver for it. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-03-14 19:51:19 +07:00
CONFIG_DP83848_PHY=y
ARM: omap2plus_defconfig: enable DP83867 phy driver TI's DP83867 phy is used on DRA72x EVM rev C and DRA71x EVMs. Enable support for it in omap2plus_defconfig. The driver is built into the kernel to help NFS booting. Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-09 21:02:49 +07:00
CONFIG_DP83867_PHY=y
ARM: omap2plus_defconfig: Enable support for micrell phys The phyCORE-AM335x SoM with PCM-953 carrierboard has a KSZ9021 phy mounted. To add support for this we need to enable the micrell phy driver in the config. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24 17:09:35 +07:00
CONFIG_MICREL_PHY=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_SMSC_PHY=y
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:27 +07:00
CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_USBNET=m
ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-12 23:11:04 +07:00
CONFIG_USB_NET_SMSC75XX=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_NET_SMSC95XX=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:27 +07:00
CONFIG_USB_NET_QMI_WWAN=m
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:48:44 +07:00
CONFIG_USB_CDC_PHONET=m
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
CONFIG_LIBERTAS_SDIO=m
CONFIG_LIBERTAS_DEBUG=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_MWIFIEX=m
CONFIG_MWIFIEX_SDIO=m
CONFIG_MWIFIEX_USB=m
ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig Many boards have either WL12XX or MWIFIEX, so let's build modules for those by default. This also makes it easier to test WLAN on pandaboard to avoid regressions like we had with the move to device tree based booting. And at least the zoom boards need the of_serial for the UARTs connected to the GPMC bus. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:21 +07:00
CONFIG_WL12XX=m
CONFIG_WL18XX=m
CONFIG_WLCORE_SPI=m
CONFIG_WLCORE_SDIO=m
ARM: omap2plus_defconfig: Enable INPUT_MOUSEDEV as loadable modules Otherwise mice won't be happy. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-02-17 21:51:17 +07:00
CONFIG_INPUT_MOUSEDEV=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_GPIO=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_KEYBOARD_MATRIX=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_KEYBOARD_OMAP4=m
CONFIG_KEYBOARD_TWL4030=m
# CONFIG_INPUT_MOUSE is not set
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_INPUT_TOUCHSCREEN=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_TOUCHSCREEN_ADS7846=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_TOUCHSCREEN_ATMEL_MXT=m
ARM: omap2plus_defconfig: enable EDT FT5X06 touchscreen AM437x Starter Kit ships with EDT FT5306 touchscreen device. By enabling the driver we make sure touchscreen will work out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:07:00 +07:00
CONFIG_TOUCHSCREEN_EDT_FT5X06=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_PIXCIR Some of the OMAP based boards e.g. am437x-gp-evm have the Pixcir touch controller. Enable the related device driver. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-06-02 16:45:11 +07:00
CONFIG_TOUCHSCREEN_PIXCIR=m
ARM: omap2plus_defconfig: Enable TOUCHSCREEN_TSC2004 The LogicPD DM3730 Torpedo and SOM-LV devices have the TI TSC2004 touchscreen controller. Enable the related driver as a module. Signed-off-by: Adam Ford <aford173@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-04 07:44:52 +07:00
CONFIG_TOUCHSCREEN_TSC2004=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_INPUT_MISC=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_INPUT_CPCAP_PWRBUTTON=m
ARM: omap2plus_defconfig: enable TPS65218 power button Enable tps65218 power button driver by default as a dynamically linked module so AM437x SK can report power button presses. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-27 02:28:24 +07:00
CONFIG_INPUT_TPS65218_PWRBUTTON=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_INPUT_TWL4030_PWRBUTTON=m
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 04:14:40 +07:00
CONFIG_INPUT_PALMAS_PWRBUTTON=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_SERIO=m
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 13:37:06 +07:00
# CONFIG_LEGACY_PTYS is not set
ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial We should not select drivers from kconfig as they should by default be optional. Otherwise we'll be chasing broken dependencies forever: warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MWAVE) selects SERIAL_8250 which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS) Fix the issue by removing the selects for zoom and add them to omap2plus_defconfig. Reported-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-03-05 01:28:21 +07:00
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_SERIAL_8250_NR_UARTS=32
ARM: omap2plus_defconfig: Fix probe errors on UARTs 5 and 6 We have more than four uarts on some SoCs and that can cause noise with errors while booting. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-21 03:13:19 +07:00
CONFIG_SERIAL_8250_RUNTIME_UARTS=6
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
CONFIG_SERIAL_8250_DETECT_IRQ=y
CONFIG_SERIAL_8250_RSA=y
ARM: OMAP2+: Add WLAN modules and of_serial to omap2plus_defconfig Many boards have either WL12XX or MWIFIEX, so let's build modules for those by default. This also makes it easier to test WLAN on pandaboard to avoid regressions like we had with the move to device tree based booting. And at least the zoom boards need the of_serial for the UARTs connected to the GPMC bus. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:21 +07:00
CONFIG_SERIAL_OF_PLATFORM=y
ARM: OMAP2+: Fix unmet direct dependencies for SERIAL_OMAP Commit 8a6201b9 (ARM: OMAP2+: Fix unmet direct dependencies for zoom for 8250 serial) fixed unmet direct dependencies for 8250, but failed to do the same for omap serial. This can cause the following warning: warning: (ARCH_OMAP2PLUS_TYPICAL) selects SERIAL_OMAP which has unmet direct dependencies (TTY && HAS_IOMEM && GENERIC_HARDIRQS && ARCH_OMAP2PLUS). We should not select drivers, they should be selected by the user. Fix the issue by removing the select and adding them to omap2plus_defconfig instead. Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-04-19 00:54:29 +07:00
CONFIG_SERIAL_OMAP=y
CONFIG_SERIAL_OMAP_CONSOLE=y
ARM: omap2plus_defconfig: Add SERIAL_DEV for bluetooth We now have SERIAL_DEV that at least TI WLAN devices can use. We want SERIAL_DEV built-in, so we can also enable the option for SERIAL_DEV_CTRL_TTYPORT. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:47:35 +07:00
CONFIG_SERIAL_DEV_BUS=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_I2C_CHARDEV=y
CONFIG_SPI=y
CONFIG_SPI_OMAP24XX=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_SPI_TI_QSPI=m
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:48:44 +07:00
CONFIG_HSI=m
CONFIG_OMAP_SSI=m
CONFIG_SSI_PROTOCOL=m
ARM: OMAP2+: select PINCTRL in Kconfig Select PINCTRL in Kconfig under Typical OMAP configuration, this is required to add pinctrl driver to omap2+ family of devices. Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated to select pinctrl-single in defconfig] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-11 00:34:52 +07:00
CONFIG_PINCTRL_SINGLE=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_DEBUG_GPIO=y
CONFIG_GPIO_SYSFS=y
ARM: omap2plus_defconfig: enable GPIO_PCA953X This enables tca6424a GPIO expander driver that in turn enables TPD12S015 HDMI ESD protection and level shifter on OMAP5 uevm. In other words, it makes HDMI work on OMAP5 uevm. Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-16 05:36:20 +07:00
CONFIG_GPIO_PCA953X=m
ARM: omap2plus_defconfig: make PCF857x built-in One of the lines from PCF857x is connected to the vdd line of MMC1 in DRA74x and DRA72x EVMs and is modelled as a regulator. If PCF857x is not made as built-in, the regulator_get in omap_hsmmc fails making it difficult to use MMC1 as rootfs. Make PCF857x built-in. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-08-05 20:43:49 +07:00
CONFIG_GPIO_PCF857X=y
ARM: omap2plus_defconfig: Enable LP87565 dra76-evm has LP87565. Enable it in omap2plus_defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-12 11:06:03 +07:00
CONFIG_GPIO_LP87565=y
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 04:14:40 +07:00
CONFIG_GPIO_PALMAS=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_GPIO_TWL4030=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_W1=m
CONFIG_HDQ_MASTER_OMAP=m
ARM: omap2plus_defconfig: Run make savedefconfig to save some space This shrinks down omap2plus_defconfig a bit and makes it easier for people to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-11-16 02:01:24 +07:00
CONFIG_POWER_AVS=y
CONFIG_POWER_RESET=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_POWER_RESET_GPIO=y
power: bq27x00_battery: Renaming for consistency Rename functions that are used by multiple devices. New devices have been added and the function names and driver name are no longer general enough for the functionality they provide. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: GUAN Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Sebastian Reichel <sre@kernel.org>
2015-09-23 02:35:06 +07:00
CONFIG_BATTERY_BQ27XXX=m
ARM: omap2plus_defconfig: Enable battery and reset drivers Since many omaps run on battery, we should have the battery drivers enabled. Let's also enable the reset driver. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_CHARGER_ISP1704=m
CONFIG_CHARGER_TWL4030=m
CONFIG_CHARGER_BQ2415X=m
CONFIG_CHARGER_BQ24190=m
CONFIG_CHARGER_BQ24735=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_HWMON=m
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 04:14:40 +07:00
CONFIG_SENSORS_GPIO_FAN=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_SENSORS_LM75=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_SENSORS_TMP102=m
CONFIG_THERMAL=m
ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver Enable the bandgap driver for TI SoCs thermal support. Cc: Russell King <linux@arm.linux.org.uk> Cc: Tony Lindgren <tony@atomide.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-08 03:46:07 +07:00
CONFIG_THERMAL_GOV_FAIR_SHARE=y
CONFIG_THERMAL_GOV_USER_SPACE=y
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:07 +07:00
CONFIG_CPU_THERMAL=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_TI_SOC_THERMAL=m
ARM: omap2plus_defconfig: Add cpufreq to defconfig Note that we can now use the CONFIG_GENERIC_CPUFREQ_CPU0, so let's only enable that. Let's use CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND as suggested by Nishant. And also let's enable thermal as explained by Nishant Menon: Many TI SoCs using Highest frequency is not really too nice of an idea for long periods of time. And not everything is upstream to support things optimially - example avs class 0, 1.5 ABB consolidation with cpufreq etc.. We definitely need thermal enabled as well for device safety needs. [tony@atomide.com: updated per Nishant's suggestions] Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:07 +07:00
CONFIG_TI_THERMAL=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_OMAP4_THERMAL=y
CONFIG_OMAP5_THERMAL=y
CONFIG_DRA752_THERMAL=y
CONFIG_WATCHDOG=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_OMAP_WATCHDOG=m
CONFIG_TWL4030_WATCHDOG=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_MFD_CPCAP=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_MFD_TI_AM335X_TSCADC=m
ARM: omap2plus_defconfig: Select MFD_TI_LMU We have REGULATOR_LM363X selected but not MFD_TI_LMU and REGULATOR_LM363X depends on MFD_TI_LMU. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:54:52 +07:00
CONFIG_MFD_TI_LMU=m
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 05:41:25 +07:00
CONFIG_MFD_PALMAS=y
ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support TPS65217 is described in arch/arm/boot/dts/am335x-bone.dts but doesn't enabled in arch/arm/configs/omap2plus_defconfig. Enable TPS65217 support in omap2plus_defconfig. Signed-off-by: Igor Mazanov <i.mazanov@gmail.com> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 02:30:00 +07:00
CONFIG_MFD_TPS65217=y
ARM: omap2plus_defconfig: Enable LP873X support LP873X family of PMICs are used in dra71x-evm, So enable the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-21 17:38:41 +07:00
CONFIG_MFD_TI_LP873X=y
ARM: omap2plus_defconfig: Enable LP87565 dra76-evm has LP87565. Enable it in omap2plus_defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-12 11:06:03 +07:00
CONFIG_MFD_TI_LP87565=y
ARM: omap2plus_defconfig: enable TPS65218 configs Enable TPS65218 config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-09 12:36:33 +07:00
CONFIG_MFD_TPS65218=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_MFD_TPS65910=y
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09 06:48:02 +07:00
CONFIG_TWL6040_CORE=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_REGULATOR_CPCAP=y
ARM: omap2plus_defconfig: Enable REGULATOR_GPIO GPIO regulator is used on dra71-evm platform to control MMCSD IO voltage Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-21 17:38:40 +07:00
CONFIG_REGULATOR_GPIO=y
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_REGULATOR_LM363X=m
ARM: omap2plus_defconfig: Enable LP872x regulator support The LP872x regulator is used in the LG Optimus Black codename sniper to supply the external mmc card. Signed-off-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-28 19:39:44 +07:00
CONFIG_REGULATOR_LP872X=y
ARM: omap2plus_defconfig: Enable LP873X support LP873X family of PMICs are used in dra71x-evm, So enable the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-10-21 17:38:41 +07:00
CONFIG_REGULATOR_LP873X=y
ARM: omap2plus_defconfig: Enable LP87565 dra76-evm has LP87565. Enable it in omap2plus_defconfig. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-08-12 11:06:03 +07:00
CONFIG_REGULATOR_LP87565=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 05:41:25 +07:00
CONFIG_REGULATOR_PALMAS=y
ARM: omap2plus_defconfig: Shrink with savedefconfig This saves few lines and makes it easier to make patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:07 +07:00
CONFIG_REGULATOR_PBIAS=y
ARM: OMAP2+: Enable CPUidle in omap2plus_defconfig Enable CPUidle so it's easier for maintainers to notice if some future code changes cause regressions. Cc: Kevin Hilman <khilman@linaro.org> Cc: Nishanth Menon <nm@ti.com> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-05-06 07:27:39 +07:00
CONFIG_REGULATOR_TI_ABB=y
ARM: omap2plus_defconfig: enable TPS62362 regulator This regulator is used on AM437x Industrial Development Kit. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-20 01:03:55 +07:00
CONFIG_REGULATOR_TPS62360=m
omap2/3/4: Update PMIC options for TWL and Menelaus chips These are needed for mounting root on MMC on many boards. Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the system from running with external watchdogs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 02:57:16 +07:00
CONFIG_REGULATOR_TPS65023=y
CONFIG_REGULATOR_TPS6507X=y
ARM: OMAP2+: omap2plus_defconfig: Add tps65217 support TPS65217 is described in arch/arm/boot/dts/am335x-bone.dts but doesn't enabled in arch/arm/configs/omap2plus_defconfig. Enable TPS65217 support in omap2plus_defconfig. Signed-off-by: Igor Mazanov <i.mazanov@gmail.com> Signed-off-by: AnilKumar Ch <anilkumar@ti.com> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 02:30:00 +07:00
CONFIG_REGULATOR_TPS65217=y
ARM: omap2plus_defconfig: enable TPS65218 configs Enable TPS65218 config options. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-07-09 12:36:33 +07:00
CONFIG_REGULATOR_TPS65218=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_REGULATOR_TPS65910=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_REGULATOR_TWL4030=y
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:29:08 +07:00
CONFIG_RC_CORE=m
ARM: omap2plus_defconfig: Update LIRC options We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:01:27 +07:00
CONFIG_LIRC=y
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:29:08 +07:00
CONFIG_RC_DEVICES=y
ARM: omap2plus_defconfig: Update LIRC options We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:01:27 +07:00
CONFIG_IR_SPI=m
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:29:08 +07:00
CONFIG_IR_RX51=m
ARM: omap2plus_defconfig: Update LIRC options We have LIRC selected as a loadable module but it must now be built-in. Let's update that and add few interesting new options for blinking IR LEDs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 02:01:27 +07:00
CONFIG_IR_GPIO_TX=m
CONFIG_IR_PWM_TX=m
ARM: omap2plus_defconfig: Enable ISP support and dependencies The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate camera images processing. The ISP driver implements V4L2, Media Controller and V4L2 sub-dev interfaces so enable support for the driver and all these dependencies to allow video capture to be tested using this HW IP block. Also, disable the I2C ancillary drivers auto-select option since the media driver does not auto-select the ancillary devices that are attached to the bridge because this depends on what's present in the supported OMAP boards. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 00:53:02 +07:00
CONFIG_MEDIA_SUPPORT=m
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_MEDIA_CONTROLLER=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y
CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_OMAP3=m
# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3 ISP so enable support for its driver as a module to be able to test it. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 00:53:03 +07:00
CONFIG_VIDEO_TVP5150=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_FB_OMAP2=m
ARM: omap2plus_defconfig: update display configs omapfb and omapdrm were recently made independent of each other, and this required Kconfig option changes. This patch changes the omap2plus_defconfig to enable display similarly as before: omapfb and panel & encoder drivers as modules. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Tony Lindgren <tony@atomide.com>
2016-01-29 17:08:24 +07:00
CONFIG_FB_OMAP5_DSS_HDMI=y
CONFIG_FB_OMAP2_DSS_SDI=y
CONFIG_FB_OMAP2_DSS_DSI=y
CONFIG_FB_OMAP2_ENCODER_TFP410=m
CONFIG_FB_OMAP2_ENCODER_TPD12S015=m
CONFIG_FB_OMAP2_CONNECTOR_DVI=m
CONFIG_FB_OMAP2_CONNECTOR_HDMI=m
CONFIG_FB_OMAP2_CONNECTOR_ANALOG_TV=m
CONFIG_FB_OMAP2_PANEL_DPI=m
CONFIG_FB_OMAP2_PANEL_DSI_CM=m
CONFIG_FB_OMAP2_PANEL_SONY_ACX565AKM=m
CONFIG_FB_OMAP2_PANEL_LGPHILIPS_LB035Q02=m
CONFIG_FB_OMAP2_PANEL_SHARP_LS037V7DW01=m
CONFIG_FB_OMAP2_PANEL_TPO_TD028TTEC1=m
CONFIG_FB_OMAP2_PANEL_TPO_TD043MTEA1=m
CONFIG_FB_OMAP2_PANEL_NEC_NL8048HL11=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_PLATFORM=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_GENERIC=m
CONFIG_BACKLIGHT_PWM=m
CONFIG_BACKLIGHT_PANDORA=m
CONFIG_BACKLIGHT_GPIO=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_FRAMEBUFFER_CONSOLE=y
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_LOGO=y
OMAP2+: defconfig: modularize bluetooth, audio and WLAN In working towards a smaller default kernel, only devices used for early boot should be built in. Toward that end, build the following as modules by default: - bluetooth - audio: ALSA, ASoC - WLAN Uncompressed kernel size comparison: Before: text data bss dec hex filename 6557576 465088 5616024 12638688 c0d9e0 vmlinux After: text data bss dec hex filename 5616572 436448 5610800 11663820 b1f9cc vmlinux Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-09-29 02:07:29 +07:00
CONFIG_SOUND=m
CONFIG_SND=m
ARM: omap2plus_defconfig: Add SND_OSSEMUL We have SND_MIXER_OSS and SND_PCM_OSS but they now depend on SND_OSSEMUL selecting SOUND_OSS_CORE. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 03:34:17 +07:00
CONFIG_SND_OSSEMUL=y
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 13:37:06 +07:00
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 13:37:06 +07:00
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
ARM: omap2plus_defconfig: enable AM33XX SoC sound Without this, sound on AM437x Starter Kit will not work. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:07:01 +07:00
CONFIG_SND_EDMA_SOC=m
CONFIG_SND_AM33XX_SOC_EVM=m
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 13:37:06 +07:00
CONFIG_SND_OMAP_SOC=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_SND_OMAP_SOC_HDMI_AUDIO=m
ARM: OMAP2+: omap2plus_defconfig: enable twl4030 SoC audio Many TI OMAP SoC based boards that uses twl4030 as codec have been updated to use the unified audio driver (omap-twl4030) since they have similar audio setup. So, is good to have it built to add audio support to these boards. Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-12-17 02:30:00 +07:00
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
ARM: OMAP4+: omap2plus_defconfig: Enable audio via TWL6040 as module Boards supported upstream all use TWL6040 as audio codec, enable the common ASoC machine driver by default for them. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Tested-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-05-09 06:48:02 +07:00
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
omap: Run make savedefconfig on omap2plus_defconfig to shrink it After commit ffb63e3 (omap2/3/4: Select all omaps and boards by default) many explicit settings can be dropped from the defconfig. This shrinks it down a bit more and makes it easier to patch later on. Signed-off-by: Tony Lindgren <tony@atomide.com>
2011-04-21 13:37:06 +07:00
CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m
ARM: omap2plus_defconfig: Enable audio related config options More and more boards are moving to have audio support via simple-card. At the same time enable options needed for most am335x and am43xx board for audio support: McASP and TLV320AIC3X codecs. The later two has been selected by the CONFIG_SND_AM33XX_SOC_EVM option, but the aim is to convert all boards to use simple card. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-02 21:06:16 +07:00
CONFIG_SND_SIMPLE_CARD=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_HID_GENERIC=m
CONFIG_USB_HIDDEV=y
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_MON=m
ARM: omap2plus_defconfig: enable XHCI AM437x devices have a DWC3 IP inside of them. The host side implementation of DWC3 is XHCI compliant. By enabling XHCI driver, we get the USB host port on AM437x Starter Kit working out of the box. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2014-11-19 01:07:02 +07:00
CONFIG_USB_XHCI_HCD=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
ARM: omap2plus_defconfig: Add QMI, ACM and PPP as loadable modules We have devices with modems connected, so let's make them usable. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:27 +07:00
CONFIG_USB_ACM=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_STORAGE=m
CONFIG_USB_MUSB_HDRC=m
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working With the recent Kconfig changes we need to now enable the PHYs to keep USB working. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-11 14:24:27 +07:00
CONFIG_USB_MUSB_TUSB6010=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_MUSB_OMAP2PLUS=m
CONFIG_USB_MUSB_AM35X=m
CONFIG_USB_MUSB_DSPS=m
ARM: omap2plus_defconfig: Enable MUSB DMA support With recent MUSB changes we can now build in support for multiple DMA implementations. So let's enable DMA by default to make life easier for distro use. Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-09-02 03:59:25 +07:00
CONFIG_USB_INVENTRA_DMA=y
CONFIG_USB_TI_CPPI41_DMA=y
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working With the recent Kconfig changes we need to now enable the PHYs to keep USB working. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-11 14:24:27 +07:00
CONFIG_USB_TUSB_OMAP_DMA=y
ARM: configs: omap2plus_defconfig: enable dwc3 and dependencies DWC3 enables USB3 functionality for OMAP5 boards, it's safe to enable those drivers in omap2plus_defconfig. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com> [tony@atomide.com: updated against other defconfig changes] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-12 05:41:25 +07:00
CONFIG_USB_DWC3=m
ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-12 23:11:04 +07:00
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_SIMPLE=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_PL2303=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_TEST=m
ARM: omap2plus_defconfig: Fix USB selection to keep Ethernet working With the recent Kconfig changes we need to now enable the PHYs to keep USB working. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-07-11 14:24:27 +07:00
CONFIG_NOP_USB_XCEIV=m
CONFIG_AM335X_PHY_USB=m
ARM: omap2plus_defconfig: Enable twl6030 USB phy as loadable module This is in use on omap4 boards. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-27 00:31:23 +07:00
CONFIG_TWL6030_USB=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_GADGET=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_USB_GADGET_DEBUG=y
CONFIG_USB_GADGET_DEBUG_FILES=y
CONFIG_USB_GADGET_DEBUG_FS=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_CONFIGFS=m
CONFIG_USB_CONFIGFS_SERIAL=y
CONFIG_USB_CONFIGFS_ACM=y
CONFIG_USB_CONFIGFS_OBEX=y
CONFIG_USB_CONFIGFS_NCM=y
CONFIG_USB_CONFIGFS_ECM=y
CONFIG_USB_CONFIGFS_ECM_SUBSET=y
CONFIG_USB_CONFIGFS_RNDIS=y
CONFIG_USB_CONFIGFS_EEM=y
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:48:44 +07:00
CONFIG_USB_CONFIGFS_PHONET=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_USB_CONFIGFS_MASS_STORAGE=y
CONFIG_USB_CONFIGFS_F_LB_SS=y
CONFIG_USB_CONFIGFS_F_FS=y
CONFIG_USB_CONFIGFS_F_UAC1=y
CONFIG_USB_CONFIGFS_F_UAC2=y
CONFIG_USB_CONFIGFS_F_MIDI=y
CONFIG_USB_CONFIGFS_F_HID=y
omap2/3: Update omap3_defconfig to build in all the 2420 based boards Note that booting 2420 depends on another patch posted earlier to not select CONFIG_CPU_32v6K if CONFIG_ARCH_OMAP2 is selected. Also note that we cannot add omap2430 in yet because of the different clock addresses compared to 2420. Also note that we cannot have CONFIG_CPU_32v6K=y in order to boot on 24xx. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-02-13 03:26:49 +07:00
CONFIG_USB_ZERO=m
ARM: omap2plus_defconfig: Enable n900 modem as loadable modules Enable n900 modem as loadable modules. Acked-by: Acked-By: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-03-17 02:48:44 +07:00
CONFIG_USB_G_NOKIA=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MMC=y
CONFIG_SDIO_UART=y
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7 based SoC's can use sdhci-omap driver for eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-06 19:57:53 +07:00
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
omap2/3/4: Make omap3_defconfig usable on Nokia boards The bootloader on Nokia boards does not support updating the kernel cmdline. For the other boards, the bootloader provided cmdline will be used instead. To mount root on n8x0, compile in also the MMC_OMAP. It seems that the best way to mount root with the new kernels on Nokia boards is to mount root on mmcblk0p2. Note that n8x0 current has several issues booting with omap3_defconfig: The bootloader has a 2MB limit for loading kernels, so you may want to use kexec. Also ARMv6 does not currently work with ARMv7 for VFP and TLS. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 02:57:16 +07:00
CONFIG_MMC_OMAP=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MMC_OMAP_HS=y
ARM: omap2plus_defconfig: Enable CONFIG_MMC_SDHCI_OMAP Enable CONFIG_MMC_SDHCI_OMAP so that TI's dra7 based SoC's can use sdhci-omap driver for eMMC/SD/SDIO controller. Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-02-06 19:57:53 +07:00
CONFIG_MMC_SDHCI_OMAP=y
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_NEW_LEDS=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_LEDS_CLASS=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_LEDS_CPCAP=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_LEDS_GPIO=m
ARM: omap2plus_defconfig: Enable ARM_KERNMEM_PERMS and few loadable modules With recent omap assembly fixes for CONFIG_DEBUG_RODATA, we can now use DEBUG_RODATA. Let's enable ARM_KERNMEM_PERMS so that DEBUG_RODATA gets selected by default. This way we can make sure any related issues are caught early. And while testing things on various devices, I noticed we're missing few loadable modules to make things more usable: - USB Ethernet for smsc75xx, we only have smsc97xx right now - Basic USB serial drivers for things like ftdi and pl2303 ports - Blinking leds with pca963x Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-12 23:11:04 +07:00
CONFIG_LEDS_PCA963X=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_LEDS_PWM=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_LEDS_TRIGGERS=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_ONESHOT=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_BACKLIGHT=m
ARM: OMAP2+: AM33XX: omap2plus_defconfig: Add support for few drivers Adds tps65910 PMIC, lis3lv02d accelerometer, tsl2550 ambient light sensor, tmp275 temperature sensor, matrix keypad, gbio based leds and D_CAN drivers support. These peripherals are present on AM33XX family of devices (EVM, BeagleBone and EVMSK). One has to manually enable these support to use the drivers, so this patch enables all the drivers in omap2plus_defconfig Signed-off-by: AnilKumar Ch <anilkumar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-01-03 15:37:59 +07:00
CONFIG_LEDS_TRIGGER_CPU=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_LEDS_TRIGGER_GPIO=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_RTC_CLASS=y
ARM: omap2plus_defconfig: Enable misc options for BeagleBoard-X15 platform BeagleBoard-X15 has options such as rtc, fan that need to be functional Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-01-09 04:14:40 +07:00
CONFIG_RTC_DRV_DS1307=m
ARM: omap2plus_defconfig: Enable support for RTC M41T80 The phyCORE-AM335x SoM has a RV4162 RTC populated which is supported by the M41T80 driver. Enabled it so make the RTC support on the SoM available. Signed-off-by: Teresa Remmet <t.remmet@phytec.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-24 17:09:36 +07:00
CONFIG_RTC_DRV_M41T80=m
omap2/3/4: Update PMIC options for TWL and Menelaus chips These are needed for mounting root on MMC on many boards. Also disable CONFIG_WATCHDOG_NOWAYOUT, that can keep the system from running with external watchdogs. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-05-01 02:57:16 +07:00
CONFIG_RTC_DRV_TWL92330=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_RTC_DRV_TWL4030=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_RTC_DRV_PALMAS=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_RTC_DRV_OMAP=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_RTC_DRV_CPCAP=m
ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine commit 13f30fc893e4610f67dd7a8b0b67aec02eac1775 Author: Russell King <rmk+kernel@arm.linux.org.uk> Date: Sat Apr 21 22:41:10 2012 +0100 mmc: omap: remove private DMA API implementation removed the private DMA API implementation from the OMAP mmc host to exclusively use the DMA engine API. Unfortunately OMAP MMC and High Speed MMC host drivers don't support poll mode and only works with DMA. Since omap2plus_defconfig doesn't enable this feature by default, the following error is happens on an IGEPv2 Rev.C (and probably on most OMAP boards with MMC support): [ 2.199981] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine channel 48 [ 2.215087] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62 Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-30 23:59:48 +07:00
CONFIG_DMADEVICES=y
CONFIG_DMA_OMAP=y
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_TI_EDMA=y
ARM: omap2plus_defconfig: Enable OMAP IOMMU support OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so enable it to be able to test the OMAP3 Image Signal Processor (ISP). Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-02-09 00:53:01 +07:00
CONFIG_OMAP_IOMMU=y
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_EXTCON_PALMAS=m
ARM: omap2plus_defconfig: Update with make savedefconfig This shrinks the defconfig a bit and makes it easier to generate minimal patches against it. Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-14 04:39:45 +07:00
CONFIG_EXTCON_USB_GPIO=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_TI_EMIF=m
ARM: omap2plus_defconfig: enable support for TI ADC Enable support for on-chip ADC found on AM335x and AM437x devices. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 22:27:34 +07:00
CONFIG_IIO=m
ARM: defconfig: omap2plus: switch LIS3LV02DL driver The OMAP2 plus defconfig lists the LIS3LC02D MISC driver but there is nowadays a proper IIO driver for this accelerometer. Switch the config to the new driver. The IIO software triggers are helpful when using these devices without a dedicated IRQ line, so activate those too. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-01-05 20:54:00 +07:00
CONFIG_IIO_SW_DEVICE=m
CONFIG_IIO_SW_TRIGGER=m
CONFIG_IIO_ST_ACCEL_3AXIS=m
ARM: omap2plus_defconfig: Enable droid 4 devices We only need to have MFD_CPCAP and CPCAP_REGULATOR as built-in to be able to mount root on the eMMC. And then POWER_RESET_GPIO is good to have built-in. The rest of the devices can be loadable modules. This gets various devices such as regulators, touchscreen, power button, HDMI audio, LEDs, RTC, and ADC working. Note that omapdrm needs to be configured manually as we're still using omapfb by default. Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-04-10 23:29:40 +07:00
CONFIG_CPCAP_ADC=m
ARM: omap2plus_defconfig: enable support for TI ADC Enable support for on-chip ADC found on AM335x and AM437x devices. Signed-off-by: Sekhar Nori <nsekhar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-07-08 22:27:34 +07:00
CONFIG_TI_AM335X_ADC=m
ARM: omap2plus_defconfig: switch to the IIO BMP085 driver This alters the OMAP2plus defconfig to use the IIO BMP280 driver, which is compatible with the BMP085 instead of the old BMP085-specific misc driver. The IIO driver nowadays have all the features of the old driver and more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-08-24 21:24:12 +07:00
CONFIG_BMP280=m
ARM: omap2plus_defconfig: Enable some display features Now that we have panel support for DT based booting, let's make it usable and enable most things as modules. Note that omap3 boards need also the ads7847 module for the panel that we're now changing to a loadable module. And n900 seems to require setting the brightness via sysfs for acx565akm/brightness after modprobe of panel_sony_acx565akm and omapfb. Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_PWM=y
ARM: omap2plus_defconfig: Enable PWM and ir-rx51 as loadable modules These are available on n900. Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-04-27 23:40:09 +07:00
CONFIG_PWM_OMAP_DMTIMER=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_PWM_TIECAP=m
CONFIG_PWM_TIEHRPWM=m
CONFIG_PWM_TWL=m
CONFIG_PWM_TWL_LED=m
ARM: omap2plus_defconfig: Enable droid 4 USB PHY Let's enable this as loadable module for droid 4. Cc: Marcel Partap <mpartap@gmx.net> Cc: Michael Scott <michael.scott@linaro.org> Cc: Sebastian Reichel <sre@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-10-21 00:55:46 +07:00
CONFIG_PHY_CPCAP_USB=m
ARM: omap2plus_defconfig: Add dm816x USB PHY as a loadable module This is needed for USB on dm816x-evm. Cc: Bin Liu <binmlist@gmail.com> Cc: Brian Hutchinson <b.hutchman@gmail.com> Cc: George Cherian <george.cherian@ti.com> Acked-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-05-30 00:10:23 +07:00
CONFIG_PHY_DM816X_USB=m
ARM: omap2plus_defconfig: reduce zImage size on omap2plus_defconfig By converting a few drivers to modules because they won't be needed during boot anyways, we can shave off about 700KiB of text. Note that while at that, and after discussions with Tony Lindgren, a few extra drivers were either removed because they weren't needed, or added because they're useful for debugging/testing. Below is output of size for pre and post vmlinux binaries: text data bss dec hex filename 8514799 765532 8416064 17696395 10e068b vmlinux-post-patch 9069110 800316 8419072 18288498 1170f72 vmlinux-pre-patch Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-12-23 00:56:27 +07:00
CONFIG_OMAP_USB2=m
ARM: omap2plus_defconfig: Fix SATA boot SATA operation depends on PIPE3 PHY and if we want to boot from SATA drives, we have to have the PIPE3 PHY driver built-in. Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-23 22:18:37 +07:00
CONFIG_TI_PIPE3=y
ARM: OMAP: enable TWL4030_USB in omap2plus_defconfig Enable TWL4030_USB which is used at least on Nokia N900/N950/N9 (OMAP3) and BeagleBoard. Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren <tony@atomide.com>
2015-02-27 04:07:29 +07:00
CONFIG_TWL4030_USB=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_FANOTIFY=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
ARM: omap2plus_defconfig: Fix bloat caused by having ipv6 built-in Commit 673ce00c5d6c (ARM: omap2plus_defconfig: Add support for distros with systemd) caused considerable bloat as noted by Paul Walmsley <paul@pwsan.com>. Let's fix this issue by making what we can into loadable modules for the systemd options. That's only IPV6 and AUTOFS4_FS it seems, and IPv6 defaults to a loadable module. Reported-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-10-27 23:00:21 +07:00
CONFIG_AUTOFS4_FS=m
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
ARM: omap2plus_defconfig: Add support for distros with systemd Some distros are now using systemd, so let's enable most of what's recommended at: http://cgit.freedesktop.org/systemd/systemd/tree/README Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
2014-09-18 23:01:08 +07:00
CONFIG_TMPFS_POSIX_ACL=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_SUMMARY=y
CONFIG_JFFS2_FS_XATTR=y
CONFIG_JFFS2_COMPRESSION_OPTIONS=y
CONFIG_JFFS2_LZO=y
CONFIG_JFFS2_RUBIN=y
CONFIG_UBIFS_FS=y
CONFIG_CRAMFS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
ARM: OMAP2+: Run make savedefconfig on omap2plus_defconfig to shrink it We can save few tens of lines this way, and it is easier to generate minimal patches against omap2plus_defconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-10-11 23:18:20 +07:00
CONFIG_DEBUG_INFO=y
ARM: omap2plus_defconfig: enable SPLIT and DWARF4 CONFIG_DEBUG_INFO_SPLIT will split debug info on .dwo files. This will generate a smaller vmlinux and smaller .ko modules, which will be easier to ship on certain products. CONFIG_DEBUG_INFO_DWARF4 will generate debug info in DWARF4 format, which ends up being larger, but improves the probability of resolving variables in optmized code. Signed-off-by: Felipe Balbi <balbi@ti.com> [tony@atomide.com: this makes initramfs quite a bit smaller] Signed-off-by: Tony Lindgren <tony@atomide.com>
2016-01-12 04:26:12 +07:00
CONFIG_DEBUG_INFO_SPLIT=y
CONFIG_DEBUG_INFO_DWARF4=y
arm: omap: Add omap3_defconfig Having one combined defconfig that is the superset of the individual defconfigs for OMAP3 platforms is useful for easily finding build errors. Not to mention convenient as a base if you want to boot several platforms with a single kernel image. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-12-02 03:09:26 +07:00
CONFIG_MAGIC_SYSRQ=y
CONFIG_SCHEDSTATS=y
CONFIG_PROVE_LOCKING=y
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_SECURITY=y
CONFIG_CRYPTO_MICHAEL_MIC=y
ARM: omap2plus_defconfig: enable NEON based crypto Enable kernel mode NEON and the various NEON based crypto algorithms, which are between 1.4x (AES-XTS) and 2.4x (AES-GCM) faster than scalar code (measured on Cortex-A8). Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2017-09-07 01:47:29 +07:00
CONFIG_ARM_CRYPTO=y
CONFIG_CRYPTO_SHA1_ARM_NEON=m
CONFIG_CRYPTO_SHA256_ARM=m
CONFIG_CRYPTO_SHA512_ARM=m
CONFIG_CRYPTO_AES_ARM=m
CONFIG_CRYPTO_AES_ARM_BS=m
CONFIG_CRYPTO_GHASH_ARM_CE=m
ARM: omap2plus_defconfig: Update for moved options Just move the options around to make applying patches against omap2plus_defconfig easier after making make savedefconfig. Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-02 01:29:08 +07:00
CONFIG_CRYPTO_CHACHA20_NEON=m
CONFIG_CRC_CCITT=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
Reference in New Issue Copy Permalink