linux_dsm_epyc7002/arch/x86/kernel/irq_work.c

46 lines
932 B
C
Raw Normal View History

/*
* x86 specific code for irq_work
*
* Copyright (C) 2010 Red Hat, Inc., Peter Zijlstra
*/
#include <linux/kernel.h>
#include <linux/irq_work.h>
#include <linux/hardirq.h>
#include <asm/apic.h>
x86, trace: Add irq vector tracepoints [Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:46:53 +07:00
#include <asm/trace/irq_vectors.h>
x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers This patch adds the __irq_entry annotation to the default x86 platform IRQ handlers. ftrace's function_graph tracer uses the __irq_entry annotation to notify the entry and return of IRQ handlers. For example, before the patch: 354549.667252 | 3) d..1 | default_idle_call() { 354549.667252 | 3) d..1 | arch_cpu_idle() { 354549.667253 | 3) d..1 | default_idle() { 354549.696886 | 3) d..1 | smp_trace_reschedule_interrupt() { 354549.696886 | 3) d..1 | irq_enter() { 354549.696886 | 3) d..1 | rcu_irq_enter() { After the patch: 366416.254476 | 3) d..1 | arch_cpu_idle() { 366416.254476 | 3) d..1 | default_idle() { 366416.261566 | 3) d..1 ==========> | 366416.261566 | 3) d..1 | smp_trace_reschedule_interrupt() { 366416.261566 | 3) d..1 | irq_enter() { 366416.261566 | 3) d..1 | rcu_irq_enter() { KASAN also uses this annotation. The smp_apic_timer_interrupt() was already annotated. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Claudio Fontana <claudio.fontana@huawei.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolai Stange <nicstange@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/059fdf437c2f0c09b13c18c8fe4e69999d3ffe69.1483528431.git.bristot@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-04 18:20:33 +07:00
#include <linux/interrupt.h>
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:45:17 +07:00
static inline void __smp_irq_work_interrupt(void)
{
inc_irq_stat(apic_irq_work_irqs);
irq_work_run();
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:45:17 +07:00
}
x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers This patch adds the __irq_entry annotation to the default x86 platform IRQ handlers. ftrace's function_graph tracer uses the __irq_entry annotation to notify the entry and return of IRQ handlers. For example, before the patch: 354549.667252 | 3) d..1 | default_idle_call() { 354549.667252 | 3) d..1 | arch_cpu_idle() { 354549.667253 | 3) d..1 | default_idle() { 354549.696886 | 3) d..1 | smp_trace_reschedule_interrupt() { 354549.696886 | 3) d..1 | irq_enter() { 354549.696886 | 3) d..1 | rcu_irq_enter() { After the patch: 366416.254476 | 3) d..1 | arch_cpu_idle() { 366416.254476 | 3) d..1 | default_idle() { 366416.261566 | 3) d..1 ==========> | 366416.261566 | 3) d..1 | smp_trace_reschedule_interrupt() { 366416.261566 | 3) d..1 | irq_enter() { 366416.261566 | 3) d..1 | rcu_irq_enter() { KASAN also uses this annotation. The smp_apic_timer_interrupt() was already annotated. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Claudio Fontana <claudio.fontana@huawei.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolai Stange <nicstange@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/059fdf437c2f0c09b13c18c8fe4e69999d3ffe69.1483528431.git.bristot@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-04 18:20:33 +07:00
__visible void __irq_entry smp_irq_work_interrupt(struct pt_regs *regs)
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:45:17 +07:00
{
ipi_entering_ack_irq();
x86, trace: Introduce entering/exiting_irq() When implementing tracepoints in interrupt handers, if the tracepoints are simply added in the performance sensitive path of interrupt handers, it may cause potential performance problem due to the time penalty. To solve the problem, an idea is to prepare non-trace/trace irq handers and switch their IDTs at the enabling/disabling time. So, let's introduce entering_irq()/exiting_irq() for pre/post- processing of each irq handler. A way to use them is as follows. Non-trace irq handler: smp_irq_handler() { entering_irq(); /* pre-processing of this handler */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ exiting_irq(); /* post-processing of this handler */ } Trace irq_handler: smp_trace_irq_handler() { entering_irq(); /* pre-processing of this handler */ trace_irq_entry(); /* tracepoint for irq entry */ __smp_irq_handler(); /* * common logic between non-trace and trace handlers * in a vector. */ trace_irq_exit(); /* tracepoint for irq exit */ exiting_irq(); /* post-processing of this handler */ } If tracepoints can place outside entering_irq()/exiting_irq() as follows, it looks cleaner. smp_trace_irq_handler() { trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); } But it doesn't work. The problem is with irq_enter/exit() being called. They must be called before trace_irq_enter/exit(), because of the rcu_irq_enter() must be called before any tracepoints are used, as tracepoints use rcu to synchronize. As a possible alternative, we may be able to call irq_enter() first as follows if irq_enter() can nest. smp_trace_irq_hander() { irq_entry(); trace_irq_entry(); smp_irq_handler(); trace_irq_exit(); irq_exit(); } But it doesn't work, either. If irq_enter() is nested, it may have a time penalty because it has to check if it was already called or not. The time penalty is not desired in performance sensitive paths even if it is tiny. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C3238D.9040706@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:45:17 +07:00
__smp_irq_work_interrupt();
exiting_irq();
}
x86/irq, trace: Add __irq_entry annotation to x86's platform IRQ handlers This patch adds the __irq_entry annotation to the default x86 platform IRQ handlers. ftrace's function_graph tracer uses the __irq_entry annotation to notify the entry and return of IRQ handlers. For example, before the patch: 354549.667252 | 3) d..1 | default_idle_call() { 354549.667252 | 3) d..1 | arch_cpu_idle() { 354549.667253 | 3) d..1 | default_idle() { 354549.696886 | 3) d..1 | smp_trace_reschedule_interrupt() { 354549.696886 | 3) d..1 | irq_enter() { 354549.696886 | 3) d..1 | rcu_irq_enter() { After the patch: 366416.254476 | 3) d..1 | arch_cpu_idle() { 366416.254476 | 3) d..1 | default_idle() { 366416.261566 | 3) d..1 ==========> | 366416.261566 | 3) d..1 | smp_trace_reschedule_interrupt() { 366416.261566 | 3) d..1 | irq_enter() { 366416.261566 | 3) d..1 | rcu_irq_enter() { KASAN also uses this annotation. The smp_apic_timer_interrupt() was already annotated. Signed-off-by: Daniel Bristot de Oliveira <bristot@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Aaron Lu <aaron.lu@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Baoquan He <bhe@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Claudio Fontana <claudio.fontana@huawei.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dou Liyang <douly.fnst@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Nicolai Stange <nicstange@gmail.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Wanpeng Li <wanpeng.li@hotmail.com> Cc: linux-edac@vger.kernel.org Link: http://lkml.kernel.org/r/059fdf437c2f0c09b13c18c8fe4e69999d3ffe69.1483528431.git.bristot@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-01-04 18:20:33 +07:00
__visible void __irq_entry smp_trace_irq_work_interrupt(struct pt_regs *regs)
x86, trace: Add irq vector tracepoints [Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:46:53 +07:00
{
ipi_entering_ack_irq();
x86, trace: Add irq vector tracepoints [Purpose of this patch] As Vaibhav explained in the thread below, tracepoints for irq vectors are useful. http://www.spinics.net/lists/mm-commits/msg85707.html <snip> The current interrupt traces from irq_handler_entry and irq_handler_exit provide when an interrupt is handled. They provide good data about when the system has switched to kernel space and how it affects the currently running processes. There are some IRQ vectors which trigger the system into kernel space, which are not handled in generic IRQ handlers. Tracing such events gives us the information about IRQ interaction with other system events. The trace also tells where the system is spending its time. We want to know which cores are handling interrupts and how they are affecting other processes in the system. Also, the trace provides information about when the cores are idle and which interrupts are changing that state. <snip> On the other hand, my usecase is tracing just local timer event and getting a value of instruction pointer. I suggested to add an argument local timer event to get instruction pointer before. But there is another way to get it with external module like systemtap. So, I don't need to add any argument to irq vector tracepoints now. [Patch Description] Vaibhav's patch shared a trace point ,irq_vector_entry/irq_vector_exit, in all events. But there is an above use case to trace specific irq_vector rather than tracing all events. In this case, we are concerned about overhead due to unwanted events. So, add following tracepoints instead of introducing irq_vector_entry/exit. so that we can enable them independently. - local_timer_vector - reschedule_vector - call_function_vector - call_function_single_vector - irq_work_entry_vector - error_apic_vector - thermal_apic_vector - threshold_apic_vector - spurious_apic_vector - x86_platform_ipi_vector Also, introduce a logic switching IDT at enabling/disabling time so that a time penalty makes a zero when tracepoints are disabled. Detailed explanations are as follows. - Create trace irq handlers with entering_irq()/exiting_irq(). - Create a new IDT, trace_idt_table, at boot time by adding a logic to _set_gate(). It is just a copy of original idt table. - Register the new handlers for tracpoints to the new IDT by introducing macros to alloc_intr_gate() called at registering time of irq_vector handlers. - Add checking, whether irq vector tracing is on/off, into load_current_idt(). This has to be done below debug checking for these reasons. - Switching to debug IDT may be kicked while tracing is enabled. - On the other hands, switching to trace IDT is kicked only when debugging is disabled. In addition, the new IDT is created only when CONFIG_TRACING is enabled to avoid being used for other purposes. Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com> Link: http://lkml.kernel.org/r/51C323ED.5050708@hds.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Steven Rostedt <rostedt@goodmis.org>
2013-06-20 22:46:53 +07:00
trace_irq_work_entry(IRQ_WORK_VECTOR);
__smp_irq_work_interrupt();
trace_irq_work_exit(IRQ_WORK_VECTOR);
exiting_irq();
}
void arch_irq_work_raise(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
if (!arch_irq_work_has_interrupt())
return;
apic->send_IPI_self(IRQ_WORK_VECTOR);
apic_wait_icr_idle();
#endif
}