linux_dsm_epyc7002/drivers/gpu/drm/panel/Makefile

obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
drm/panel: Add simple panel support Add a driver for simple panels. Such panels can have a regulator that provides the supply voltage and a separate GPIO to enable the panel. Optionally the panels can have a backlight associated with them so it can be enabled or disabled according to the panel's power management mode. Support is added for two panels: An AU Optronics 10.1" WSVGA and a Chunghwa Picture Tubes 10.1" WXGA panel. Signed-off-by: Thierry Reding <treding@nvidia.com> 2013-08-30 20:10:14 +07:00			`obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o`
drm/panel: Add Samsung prefix to panel drivers The likelihood of getting a large number of panel drivers from different vendors is quite high. Add a prefix to the two existing Samsung panel drivers to set a guideline for future patch submissions. Using vendor prefixes consistently should allow a cleaner organization of the tree. Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Thierry Reding <treding@nvidia.com> 2015-04-14 19:57:14 +07:00			`obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o`
			`obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o`
drm/panel: Add Sharp LQ101R1SX01 support This panel requires dual-channel mode. The device accepts command-mode data on 8 lanes and will therefore need a dual-channel DSI controller. The two interfaces that make up this device need to be instantiated in the controllers that gang up to provide the dual-channel DSI host. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Reding <treding@nvidia.com> 2014-08-01 19:26:35 +07:00			`obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o`