AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-15 09:56:58 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
a96bb19769
linux_dsm_epyc7002/arch/arm/mach-shmobile/Makefile

44 lines
1.4 KiB
Makefile
Raw Normal View History

ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 18:14:49 +07:00
#
# Makefile for the linux kernel.
#
# Common objects
ARM: shmobile: Remove obsolete custom earlyprintk code The last caller of shmobile_setup_console() was removed in commit 44d88c754e57a6d9 ("ARM: shmobile: Remove legacy SoC code for R-Mobile A1"). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-08-05 01:03:08 +07:00
obj-y := timer.o
ARM: mach-shmobile: SH-Mobile G3 support. This adds preliminary support for the SH-Mobile G-series. The SH-Mobile G-series is a series of ARM/SH multi-core CPUs that aside from the ARM MPU are primarily composed of existing SH IP blocks. This includes initial support for the SH7367 (SH-Mobile G3) CPU and the G3EVM reference board. Only timer, serial console, and NOR flash are supported at this point. Patches for the interrupt controller, pinmux support, clock framework and runtime pm will be submitted as feature patches on top of this. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-05 18:14:49 +07:00
# CPU objects
ARM: shmobile: Remove legacy SoC code for SH-Mobile AG5 The last user of the SH-Mobile AG5 (sh73a0) legacy SoC code was the KZM-A9-GT legacy board code, which has been removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-06-17 16:31:20 +07:00
obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o
ARM: shmobile: Only build clocks when COMMON_CLK=n Move shared clock.c file and per-SoC clock-xxx.c files to only build when CONFIG_COMMON_CLK != y. The regular ARCH_SHMOBILE case with legacy SH clock framework will build just as before with this patch applied, however the case when COMMON_CLK=y will exclude all the clock files. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-18 03:30:59 +07:00
obj-$(CONFIG_ARCH_R8A73A4) += setup-r8a73a4.o
ARM: shmobile: Remove legacy SoC code for R-Mobile A1 The last user of the R-Mobile A1 (r8a7740) legacy SoC code was the Armadillo-800 EVA legacy board code, which has been removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [horms: resolved trivial conflicts with v4.2-rc1] Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-06-17 16:31:24 +07:00
obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o
ARM: shmobile: Only build clocks when COMMON_CLK=n Move shared clock.c file and per-SoC clock-xxx.c files to only build when CONFIG_COMMON_CLK != y. The regular ARCH_SHMOBILE case with legacy SH clock framework will build just as before with this patch applied, however the case when COMMON_CLK=y will exclude all the clock files. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-18 03:30:59 +07:00
obj-$(CONFIG_ARCH_R8A7778) += setup-r8a7778.o
ARM: shmobile: Cleanup pm-rcar.o build using Kconfig Add a CONFIG_PM_RCAR entry and enable it for R-Car Generation 1 or 2 in case CONFIG_PM or CONFIG_SMP is set. Consolidate power management objects and get rid of #ifdefs in the C code. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-25 10:03:52 +07:00
obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o pm-r8a7779.o
ARM: shmobile: Consolidate the pm code for R-Car Gen2 The pm code for R-Car Gen2 is scatterd in each SoC. These files (pm-r8a7790.c/pm-r8a7791.c) have some overlap code. This change consolidate the pm code for R-Car Gen2 into one. Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-16 12:48:43 +07:00
obj-$(CONFIG_ARCH_R8A7790) += setup-r8a7790.o
obj-$(CONFIG_ARCH_R8A7791) += setup-r8a7791.o
ARM: shmobile: Only build clocks when COMMON_CLK=n Move shared clock.c file and per-SoC clock-xxx.c files to only build when CONFIG_COMMON_CLK != y. The regular ARCH_SHMOBILE case with legacy SH clock framework will build just as before with this patch applied, however the case when COMMON_CLK=y will exclude all the clock files. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-18 03:30:59 +07:00
obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o
ARM: shmobile: Initial r7s72100 SoC support Add initial support for the r7272100 SoC including: - Single Cortex-A9 CPU Core - GIC No static virtual mappings are used, all the components make use of ioremap(). DT_MACHINE_START is still wrapped in CONFIG_USE_OF to match other mach-shmobile code. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-09-19 03:11:11 +07:00
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
ARM: shmobile: Only build clocks when COMMON_CLK=n Move shared clock.c file and per-SoC clock-xxx.c files to only build when CONFIG_COMMON_CLK != y. The regular ARCH_SHMOBILE case with legacy SH clock framework will build just as before with this patch applied, however the case when COMMON_CLK=y will exclude all the clock files. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-18 03:30:59 +07:00
ARM: shmobile: Allow use of boot code for non-SMP case Allow build of platsmp.c and headsmp.S even though SMP is disabled in the kernel configuration. With this in place it is possible to share the reset vector setup code with power management code that needs to be built even though SMP is disabled. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-06 14:20:10 +07:00
# CPU reset vector handling objects
cpu-y := platsmp.o headsmp.o
ARM: shmobile: Introduce a Kconfig entry for R-Car Gen2 Add a Kconfig entry for R-Car Generation 2 SoCs that enables CMT timer and the IRQC interrupt driver. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-25 10:03:43 +07:00
# Shared SoC family objects
obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
ARM: shmobile: always build rcar setup for armv7 In a combined ARMv6/v7 kernel, the setup-rcar-gen2.c cannot currently be compiled correctly because it uses the isb instruction that is not available on ARMv6. Adding the -march=armv7-a flag lets the compiler know that it is safe to build this file for ARMv7. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-11-11 22:36:50 +07:00
CFLAGS_setup-rcar-gen2.o += -march=armv7-a
ARM: shmobile: R-Car Gen2: Add da9063/da9210 regulator quirk The r8a7790/lager and r8a7791/koelsch development boards have da9063 and da9210 regulators. Both regulators have their interrupt request lines tied to the same interrupt pin (IRQ2) on the SoC. After cold boot or da9063-induced restart, both the da9063 and da9210 seem to assert their interrupt request lines. Hence as soon as one driver requests this irq, it gets stuck in an interrupt storm, as it only manages to deassert its own interrupt request line, and the other driver hasn't installed an interrupt handler yet. To handle this, install a quirk that masks the interrupts in both the da9063 and da9210. This quirk has to run after the i2c master driver has been initialized, but before the i2c slave drivers are initialized. As it depends on i2c, select I2C if one of the affected platforms is enabled in the kernel config. On koelsch, the following happens: - Cold boot or reboot using the da9063 restart handler: IRQ2 is asserted, installing da9063/da9210 regulator quirk ... i2c i2c-6: regulator_quirk_notify: 1, IRQC_MONITOR = 0x3fb i2c 6-0058: regulator_quirk_notify: 1, IRQC_MONITOR = 0x3fb i2c 6-0058: Detected da9063 i2c 6-0058: Masking da9063 interrupt sources i2c 6-0068: regulator_quirk_notify: 1, IRQC_MONITOR = 0x3fb i2c 6-0068: Detected da9210 i2c 6-0068: Masking da9210 interrupt sources i2c 6-0068: IRQ2 is not asserted, removing quirk - Warm boot (reset button): rcar_gen2_regulator_quirk: IRQ2 is not asserted, not installing quirk Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-10 02:50:40 +07:00
obj-$(CONFIG_ARCH_R8A7790) += regulator-quirk-rcar-gen2.o
obj-$(CONFIG_ARCH_R8A7791) += regulator-quirk-rcar-gen2.o
ARM: shmobile: gose: enable R-Car Gen2 regulator quirk Regulator setup seems identical to Koelsch. Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-06-01 21:22:57 +07:00
obj-$(CONFIG_ARCH_R8A7793) += regulator-quirk-rcar-gen2.o
ARM: shmobile: Allow use of boot code for non-SMP case Allow build of platsmp.c and headsmp.S even though SMP is disabled in the kernel configuration. With this in place it is possible to share the reset vector setup code with power management code that needs to be built even though SMP is disabled. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-06 14:20:10 +07:00
ARM: mach-shmobile: SMP base support Add SMP base support for R-Mobile / SH-Mobile processors. This patch contains all base code to support CONFIG_SMP regardless of ARCH_SHMOBILE processor type. Both local timer and CPU hotplug are supported, but no processor specific code is included. At this point only the default behavior is in place, so a single core will always be used even though CONFIG_SMP is enabled on multicore systems. The SMP Kconfig entry for arch/arm/Kconfig is excluded from this patch to simplify merging. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-14 14:56:55 +07:00
# SMP objects
ARM: shmobile: Allow use of boot code for non-SMP case Allow build of platsmp.c and headsmp.S even though SMP is disabled in the kernel configuration. With this in place it is possible to share the reset vector setup code with power management code that needs to be built even though SMP is disabled. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-06 14:20:10 +07:00
smp-y := $(cpu-y)
ARM: shmobile: Use shared SCU SMP boot code on sh73a0 Use shared SCU code on sh73a0 for SMP boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-31 14:07:21 +07:00
smp-$(CONFIG_ARCH_SH73A0) += smp-sh73a0.o headsmp-scu.o platsmp-scu.o
ARM: shmobile: Use shared SCU SMP boot code on r8a7779 Use shared SCU code on r8a7779 for SMP boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-31 14:07:31 +07:00
smp-$(CONFIG_ARCH_R8A7779) += smp-r8a7779.o headsmp-scu.o platsmp-scu.o
ARM: shmobile: Allow r8a7790 to build non-SMP APMU code Build the APMU for r8a7790 even though SMP is disabled in the kernel config. Also initialize Suspend-to-RAM from pm-r8a7790.c to in the future cover both UP and SMP use cases of the APMU. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-06 14:21:03 +07:00
smp-$(CONFIG_ARCH_R8A7790) += smp-r8a7790.o
ARM: shmobile: Allow r8a7791 to build non-SMP APMU code Build the APMU for r8a7791 even though SMP is disabled in the kernel config. Also initialize Suspend-to-RAM from pm-r8a7791.c to in the future cover both UP and SMP use cases of the APMU. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-06-06 14:21:19 +07:00
smp-$(CONFIG_ARCH_R8A7791) += smp-r8a7791.o
ARM: shmobile: Use shared SCU SMP boot code on emev2 Use shared SCU code on emev2 for SMP boot. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-07-31 14:07:40 +07:00
smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o
ARM: mach-shmobile: SMP base support Add SMP base support for R-Mobile / SH-Mobile processors. This patch contains all base code to support CONFIG_SMP regardless of ARCH_SHMOBILE processor type. Both local timer and CPU hotplug are supported, but no processor specific code is included. At this point only the default behavior is in place, so a single core will always be used even though CONFIG_SMP is enabled on multicore systems. The SMP Kconfig entry for arch/arm/Kconfig is excluded from this patch to simplify merging. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-14 14:56:55 +07:00
ARM: mach-shmobile: Suspend-to-RAM support This patch adds a simple Suspend-to-RAM implementation for SH-Mobile ARM. The struct shmobile_suspend_ops are kept global to allow cpu-specific code to override the callbacks if needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-29 00:23:28 +07:00
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
ARM: shmobile: Cleanup pm-rmobile.o build using Kconfig Add a CONFIG_PM_RMOBILE entry and enable it for R-Mobile SoCs in case CONFIG_PM is set. Consolidate Makefile power management objects and get rid of #ifdefs in the C code. Signed-off-by: Magnus Damm <damm+renesas@opensource.se> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2014-08-25 10:04:01 +07:00
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
ARM: shmobile: Consolidate the pm code for R-Car Gen2 The pm code for R-Car Gen2 is scatterd in each SoC. These files (pm-r8a7790.c/pm-r8a7791.c) have some overlap code. This change consolidate the pm code for R-Car Gen2 into one. Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2015-03-16 12:48:43 +07:00
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
ARM: mach-shmobile: Suspend-to-RAM support This patch adds a simple Suspend-to-RAM implementation for SH-Mobile ARM. The struct shmobile_suspend_ops are kept global to allow cpu-specific code to override the callbacks if needed. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-04-29 00:23:28 +07:00
ARM: mach-shmobile: Fix up pinmux entries in Makefile Compiling in multiple CPUs into the same kernel binary requires a Makefile update. With this patch in place it is possible to enable the pinmux code for both the SH7372 and the SH7377. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-14 14:15:35 +07:00
# Framework support
ARM: mach-shmobile: SMP base support Add SMP base support for R-Mobile / SH-Mobile processors. This patch contains all base code to support CONFIG_SMP regardless of ARCH_SHMOBILE processor type. Both local timer and CPU hotplug are supported, but no processor specific code is included. At this point only the default behavior is in place, so a single core will always be used even though CONFIG_SMP is enabled on multicore systems. The SMP Kconfig entry for arch/arm/Kconfig is excluded from this patch to simplify merging. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-12-14 14:56:55 +07:00
obj-$(CONFIG_SMP) += $(smp-y)
Reference in New Issue Copy Permalink