2009-09-24 23:02:18 +07:00
|
|
|
#ifndef __PERF_HEADER_H
|
|
|
|
#define __PERF_HEADER_H
|
2009-06-25 22:05:54 +07:00
|
|
|
|
perf: Do the big rename: Performance Counters -> Performance Events
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-21 17:02:48 +07:00
|
|
|
#include "../../../include/linux/perf_event.h"
|
2009-06-25 22:05:54 +07:00
|
|
|
#include <sys/types.h>
|
perf symbols: Use the buildids if present
With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.
'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.
When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.
Example:
[root@doppio ~]# perf report | head
/home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
# Samples: 2621434559
#
# Overhead Command Shared Object Symbol
# ........ ............... ............................. ......
#
7.91% init [kernel] [k] read_hpet
7.64% init [kernel] [k] mwait_idle_with_hints
7.60% swapper [kernel] [k] read_hpet
7.60% swapper [kernel] [k] mwait_idle_with_hints
3.65% init [kernel] [k] 0xffffffffa02339d9
[root@doppio ~]#
In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.
Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.
Another patch should also introduce a new plumbing command:
'perf list-buildids'
that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.
Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-05 03:50:43 +07:00
|
|
|
#include <stdbool.h>
|
2009-06-25 22:05:54 +07:00
|
|
|
#include "types.h"
|
2010-01-21 00:28:45 +07:00
|
|
|
#include "event.h"
|
2009-06-25 22:05:54 +07:00
|
|
|
|
2009-10-17 22:57:18 +07:00
|
|
|
#include <linux/bitmap.h>
|
|
|
|
|
2009-11-17 01:32:43 +07:00
|
|
|
enum {
|
|
|
|
HEADER_TRACE_INFO = 1,
|
|
|
|
HEADER_BUILD_ID,
|
|
|
|
HEADER_LAST_FEATURE,
|
|
|
|
};
|
2009-10-17 22:12:34 +07:00
|
|
|
|
|
|
|
#define HEADER_FEAT_BITS 256
|
|
|
|
|
2009-11-17 01:32:43 +07:00
|
|
|
struct perf_file_section {
|
|
|
|
u64 offset;
|
|
|
|
u64 size;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct perf_file_header {
|
|
|
|
u64 magic;
|
|
|
|
u64 size;
|
|
|
|
u64 attr_size;
|
|
|
|
struct perf_file_section attrs;
|
|
|
|
struct perf_file_section data;
|
|
|
|
struct perf_file_section event_types;
|
|
|
|
DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
|
|
|
|
};
|
|
|
|
|
2010-04-02 11:59:15 +07:00
|
|
|
struct perf_pipe_file_header {
|
|
|
|
u64 magic;
|
|
|
|
u64 size;
|
|
|
|
};
|
|
|
|
|
2009-11-17 01:32:43 +07:00
|
|
|
struct perf_header;
|
|
|
|
|
|
|
|
int perf_file_header__read(struct perf_file_header *self,
|
|
|
|
struct perf_header *ph, int fd);
|
|
|
|
|
2009-06-25 22:05:54 +07:00
|
|
|
struct perf_header {
|
2009-10-17 22:12:34 +07:00
|
|
|
int frozen;
|
perf tools: Reorganize some structs to save space
Using 'pahole --packable' I found some structs that could be reorganized
to eliminate alignment holes, in some cases getting them to be cacheline
multiples.
[acme@doppio linux-2.6-tip]$ codiff perf.old ~/bin/perf
builtin-annotate.c:
struct perf_session | -8
struct perf_header | -8
2 structs changed
builtin-diff.c:
struct sample_data | -8
1 struct changed
diff__process_sample_event | -8
1 function changed, 8 bytes removed, diff: -8
builtin-sched.c:
struct sched_atom | -8
1 struct changed
builtin-timechart.c:
struct per_pid | -8
1 struct changed
cmd_timechart | -16
1 function changed, 16 bytes removed, diff: -16
builtin-probe.c:
struct perf_probe_point | -8
struct perf_probe_event | -8
2 structs changed
opt_add_probe_event | -3
1 function changed, 3 bytes removed, diff: -3
util/probe-finder.c:
struct probe_finder | -8
1 struct changed
find_kprobe_trace_events | -16
1 function changed, 16 bytes removed, diff: -16
/home/acme/bin/perf:
4 functions changed, 43 bytes removed, diff: -43
[acme@doppio linux-2.6-tip]$
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2010-04-05 22:53:45 +07:00
|
|
|
bool needs_swap;
|
2009-10-17 22:12:34 +07:00
|
|
|
s64 attr_offset;
|
|
|
|
u64 data_offset;
|
|
|
|
u64 data_size;
|
|
|
|
u64 event_offset;
|
|
|
|
u64 event_size;
|
2009-10-17 22:57:18 +07:00
|
|
|
DECLARE_BITMAP(adds_features, HEADER_FEAT_BITS);
|
2009-06-25 22:05:54 +07:00
|
|
|
};
|
|
|
|
|
2011-01-12 05:56:53 +07:00
|
|
|
struct perf_evlist;
|
|
|
|
|
2011-03-10 21:15:54 +07:00
|
|
|
int perf_session__read_header(struct perf_session *session, int fd);
|
|
|
|
int perf_session__write_header(struct perf_session *session,
|
|
|
|
struct perf_evlist *evlist,
|
|
|
|
int fd, bool at_exit);
|
2010-04-02 11:59:15 +07:00
|
|
|
int perf_header__write_pipe(int fd);
|
2009-06-25 22:05:54 +07:00
|
|
|
|
2009-12-29 07:48:33 +07:00
|
|
|
int perf_header__push_event(u64 id, const char *name);
|
2009-09-12 12:52:51 +07:00
|
|
|
char *perf_header__find_event(u64 id);
|
|
|
|
|
2011-03-10 21:15:54 +07:00
|
|
|
u64 perf_evlist__sample_type(struct perf_evlist *evlist);
|
|
|
|
bool perf_evlist__sample_id_all(const struct perf_evlist *evlist);
|
perf symbols: Use the buildids if present
With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.
'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.
When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.
Example:
[root@doppio ~]# perf report | head
/home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
# Samples: 2621434559
#
# Overhead Command Shared Object Symbol
# ........ ............... ............................. ......
#
7.91% init [kernel] [k] read_hpet
7.64% init [kernel] [k] mwait_idle_with_hints
7.60% swapper [kernel] [k] read_hpet
7.60% swapper [kernel] [k] mwait_idle_with_hints
3.65% init [kernel] [k] 0xffffffffa02339d9
[root@doppio ~]#
In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.
Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.
Another patch should also introduce a new plumbing command:
'perf list-buildids'
that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.
Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-05 03:50:43 +07:00
|
|
|
void perf_header__set_feat(struct perf_header *self, int feat);
|
2010-11-27 04:39:15 +07:00
|
|
|
void perf_header__clear_feat(struct perf_header *self, int feat);
|
perf symbols: Use the buildids if present
With this change 'perf record' will intercept PERF_RECORD_MMAP
calls, creating a linked list of DSOs, then when the session
finishes, it will traverse this list and read the buildids,
stashing them at the end of the file and will set up a new
feature bit in the header bitmask.
'perf report' will then notice this feature and populate the
'dsos' list and set the build ids.
When reading the symtabs it will refuse to load from a file that
doesn't have the same build id. This improves the
reliability of the profiler output, as symbols and profiling
data is more guaranteed to match.
Example:
[root@doppio ~]# perf report | head
/home/acme/bin/perf with build id b1ea544ac3746e7538972548a09aadecc5753868 not found, continuing without symbols
# Samples: 2621434559
#
# Overhead Command Shared Object Symbol
# ........ ............... ............................. ......
#
7.91% init [kernel] [k] read_hpet
7.64% init [kernel] [k] mwait_idle_with_hints
7.60% swapper [kernel] [k] read_hpet
7.60% swapper [kernel] [k] mwait_idle_with_hints
3.65% init [kernel] [k] 0xffffffffa02339d9
[root@doppio ~]#
In this case the 'perf' binary was an older one, vanished,
so its symbols probably wouldn't match or would cause subtly
different (and misleading) output.
Next patches will support the kernel as well, reading the build
id notes for it and the modules from /sys.
Another patch should also introduce a new plumbing command:
'perf list-buildids'
that will then be used in porcelain that is distro specific to
fetch -debuginfo packages where such buildids are present. This
will in turn allow for one to run 'perf record' in one machine
and 'perf report' in another.
Future work on having the buildid sent directly from the kernel
in the PERF_RECORD_MMAP event is needed to close races, as the
DSO can be changed during a 'perf record' session, but this
patch at least helps with non-corner cases and current/older
kernels.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Jim Keniston <jkenisto@us.ibm.com>
Cc: K. Prasad <prasad@linux.vnet.ibm.com>
Cc: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Roland McGrath <roland@redhat.com>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
LKML-Reference: <1257367843-26224-1-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-05 03:50:43 +07:00
|
|
|
bool perf_header__has_feat(const struct perf_header *self, int feat);
|
2009-06-25 22:05:54 +07:00
|
|
|
|
2009-11-17 01:32:43 +07:00
|
|
|
int perf_header__process_sections(struct perf_header *self, int fd,
|
|
|
|
int (*process)(struct perf_file_section *self,
|
perf tools: Cross platform perf.data analysis support
There are still some problems related to loading vmlinux files,
but those are unrelated to the feature implemented in this
patch, so will get fixed in the next patches, but here are some
results:
1. collect perf.data file on a Fedora 12 machine, x86_64, 64-bit
userland
2. transfer it to a Debian Testing machine, PARISC64, 32-bit
userland
acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | head -5
74f9930ee94475b6b3238caf3725a50d59cb994b [kernel.kallsyms]
55fdd56670453ea66c011158c4b9d30179c1d049 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/ipt_MASQUERADE.ko
41adff63c730890480980d5d8ba513f1c216a858 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/iptable_nat.ko
90a33def1077bb8e97b8a78546dc96c2de62df46 /lib/modules/2.6.33-rc4-tip+/kernel/net/ipv4/netfilter/nf_nat.ko
984c7bea90ce1376d5c8e7ef43a781801286e62d /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/tun.ko
acme@parisc:~/git/linux-2.6-tip$ perf buildid-list | tail -5
22492f3753c6a67de5c7ccbd6b863390c92c0723 /usr/lib64/libXt.so.6.0.0
353802bb7e1b895ba43507cc678f951e778e4c6f /usr/lib64/libMagickCore.so.2.0.0
d10c2897558595efe7be8b0584cf7e6398bc776c /usr/lib64/libfprint.so.0.0.0
a83ecfb519a788774a84d5ddde633c9ba56c03ab /home/acme/bin/perf
d3ca765a8ecf257d263801d7ad8c49c189082317 /usr/lib64/libdwarf.so.0.0
acme@parisc:~/git/linux-2.6-tip$
acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm
The file [kernel.kallsyms] cannot be used, trying to use /proc/kallsyms...
^^^^ The problem related to vmlinux handling, it shouldn't be trying this
^^^^ rather alien /proc/kallsyms at all...
/lib64/libpthread-2.10.2.so with build id 5c68f7afeb33309c78037e374b0deee84dd441f6 not found, continuing without symbols
/lib64/libc-2.10.2.so with build id eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 not found, continuing without symbols
/home/acme/bin/perf with build id a83ecfb519a788774a84d5ddde633c9ba56c03ab not found, continuing without symbols
/usr/sbin/openvpn with build id f2037a091ef36b591187a858d75e203690ea9409 not found, continuing without symbols
Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/e1000e/e1000e.ko, continuing without symbols
Failed to open /lib/modules/2.6.33-rc4-tip+/kernel/drivers/net/wireless/iwlwifi/iwlcore.ko, continuing without symbols
<SNIP more complaints about not finding the right build-ids,
those will have to wait for 'perf archive' or plain
copying what was collected by 'perf record' on the x86_64,
source machine, see further below for an example of this >
# Samples: 293085637
#
# Overhead Command
# ........ ...............
#
61.70% find
23.50% perf
5.86% swapper
3.12% sshd
2.39% init
0.87% bash
0.86% sleep
0.59% dbus-daemon
0.25% hald
0.24% NetworkManager
0.19% hald-addon-rfki
0.15% openvpn
0.07% phy0
0.07% events/0
0.05% iwl3945
0.05% events/1
0.03% kondemand/0
acme@parisc:~/git/linux-2.6-tip$
Which matches what we get when running the same command for the
same perf.data file on the F12, x86_64, source machine:
[root@doppio linux-2.6-tip]# perf report --sort comm
# Samples: 293085637
#
# Overhead Command
# ........ ...............
#
61.70% find
23.50% perf
5.86% swapper
3.12% sshd
2.39% init
0.87% bash
0.86% sleep
0.59% dbus-daemon
0.25% hald
0.24% NetworkManager
0.19% hald-addon-rfki
0.15% openvpn
0.07% phy0
0.07% events/0
0.05% iwl3945
0.05% events/1
0.03% kondemand/0
[root@doppio linux-2.6-tip]#
The other modes work as well, modulo the problem with vmlinux:
acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso 2> /dev/null | head -15
# Samples: 293085637
#
# Overhead Command Shared Object
# ........ ............... .................................
#
35.11% find ffffffff81002b5a
18.25% perf ffffffff8102235f
16.17% find libc-2.10.2.so
9.07% find find
5.80% swapper ffffffff8102235f
3.95% perf libc-2.10.2.so
2.33% init ffffffff810091b9
1.65% sshd libcrypto.so.0.9.8k
1.35% find [e1000e]
0.68% sleep libc-2.10.2.so
acme@parisc:~/git/linux-2.6-tip$
And the lack of the right buildids:
acme@parisc:~/git/linux-2.6-tip$ perf report --sort comm,dso,symbol 2> /dev/null | head -15
# Samples: 293085637
#
# Overhead Command Shared Object Symbol
# ........ ............... ................................. ......
#
35.11% find ffffffff81002b5a [k] 0xffffffff81002b5a
18.25% perf ffffffff8102235f [k] 0xffffffff8102235f
16.17% find libc-2.10.2.so [.] 0x00000000045782
9.07% find find [.] 0x0000000000fb0e
5.80% swapper ffffffff8102235f [k] 0xffffffff8102235f
3.95% perf libc-2.10.2.so [.] 0x0000000007f398
2.33% init ffffffff810091b9 [k] 0xffffffff810091b9
1.65% sshd libcrypto.so.0.9.8k [.] 0x00000000105440
1.35% find [e1000e] [k] 0x00000000010948
0.68% sleep libc-2.10.2.so [.] 0x0000000011ad5b
acme@parisc:~/git/linux-2.6-tip$
But if we:
acme@parisc:~/git/linux-2.6-tip$ ls ~/.debug
ls: cannot access /home/acme/.debug: No such file or directory
acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/lib64/libc-2.10.2.so/
acme@parisc:~/git/linux-2.6-tip$ scp doppio:.debug/lib64/libc-2.10.2.so/* ~/.debug/lib64/libc-2.10.2.so/
acme@doppio's password:
eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 100% 1783KB 714.7KB/s 00:02
acme@parisc:~/git/linux-2.6-tip$ mkdir -p ~/.debug/.build-id/eb
acme@parisc:~/git/linux-2.6-tip$ ln -s ../../lib64/libc-2.10.2.so/eb4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1 ~/.debug/.build-id/eb/4ec8fa8b2a5eb18cad173c92f27ed8887ed1c1
acme@parisc:~/git/linux-2.6-tip$ perf report --dsos libc-2.10.2.so 2> /dev/null
# dso: libc-2.10.2.so
# Samples: 64281170
#
# Overhead Command Symbol
# ........ ............... ......
#
14.98% perf [.] __GI_strcmp
12.30% find [.] __GI_memmove
9.25% find [.] _int_malloc
7.60% find [.] _IO_vfprintf_internal
6.10% find [.] _IO_new_file_xsputn
6.02% find [.] __GI_close
3.08% find [.] _IO_file_overflow_internal
3.08% find [.] malloc_consolidate
3.08% find [.] _int_free
3.08% find [.] __strchrnul
3.08% find [.] __getdents64
3.08% find [.] __write_nocancel
3.08% sleep [.] __GI__dl_addr
3.08% sshd [.] __libc_select
3.08% find [.] _IO_new_file_write
3.07% find [.] _IO_new_do_write
3.06% find [.] __GI___errno_location
3.05% find [.] __GI___libc_malloc
3.04% perf [.] __GI_memcpy
1.71% find [.] __fprintf_chk
1.29% bash [.] __gconv_transform_utf8_internal
0.79% dbus-daemon [.] __GI_strlen
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
acme@parisc:~/git/linux-2.6-tip$
Which matches what we get on the source, F12, x86_64 machine:
[root@doppio linux-2.6-tip]# perf report --dsos libc-2.10.2.so
# dso: libc-2.10.2.so
# Samples: 64281170
#
# Overhead Command Symbol
# ........ ............... ......
#
14.98% perf [.] __GI_strcmp
12.30% find [.] __GI_memmove
9.25% find [.] _int_malloc
7.60% find [.] _IO_vfprintf_internal
6.10% find [.] _IO_new_file_xsputn
6.02% find [.] __GI_close
3.08% find [.] _IO_file_overflow_internal
3.08% find [.] malloc_consolidate
3.08% find [.] _int_free
3.08% find [.] __strchrnul
3.08% find [.] __getdents64
3.08% find [.] __write_nocancel
3.08% sleep [.] __GI__dl_addr
3.08% sshd [.] __libc_select
3.08% find [.] _IO_new_file_write
3.07% find [.] _IO_new_do_write
3.06% find [.] __GI___errno_location
3.05% find [.] __GI___libc_malloc
3.04% perf [.] __GI_memcpy
1.71% find [.] __fprintf_chk
1.29% bash [.] __gconv_transform_utf8_internal
0.79% dbus-daemon [.] __GI_strlen
#
# (For a higher level overview, try: perf report --sort comm,dso)
#
[root@doppio linux-2.6-tip]#
So I think this is really, really nice in that it demonstrates
the portability of perf.data files and the use of build-ids
accross such aliens worlds :-)
There are some things to fix tho, like the bitmap on the header,
but things are looking good.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
LKML-Reference: <1263478990-8200-2-git-send-email-acme@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-01-14 21:23:10 +07:00
|
|
|
struct perf_header *ph,
|
2009-11-17 01:32:43 +07:00
|
|
|
int feat, int fd));
|
|
|
|
|
2010-01-21 00:28:45 +07:00
|
|
|
int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
|
|
|
|
const char *name, bool is_kallsyms);
|
|
|
|
int build_id_cache__remove_s(const char *sbuild_id, const char *debugdir);
|
|
|
|
|
2011-01-29 23:01:45 +07:00
|
|
|
int perf_event__synthesize_attr(struct perf_event_attr *attr, u16 ids, u64 *id,
|
|
|
|
perf_event__handler_t process,
|
|
|
|
struct perf_session *session);
|
2011-03-10 21:15:54 +07:00
|
|
|
int perf_session__synthesize_attrs(struct perf_session *session,
|
|
|
|
perf_event__handler_t process);
|
2011-01-29 23:01:45 +07:00
|
|
|
int perf_event__process_attr(union perf_event *event, struct perf_session *session);
|
|
|
|
|
|
|
|
int perf_event__synthesize_event_type(u64 event_id, char *name,
|
|
|
|
perf_event__handler_t process,
|
|
|
|
struct perf_session *session);
|
|
|
|
int perf_event__synthesize_event_types(perf_event__handler_t process,
|
|
|
|
struct perf_session *session);
|
|
|
|
int perf_event__process_event_type(union perf_event *event,
|
2010-04-02 11:59:21 +07:00
|
|
|
struct perf_session *session);
|
2010-04-02 11:59:22 +07:00
|
|
|
|
2011-01-29 23:01:45 +07:00
|
|
|
int perf_event__synthesize_tracing_data(int fd, struct perf_evlist *evlist,
|
|
|
|
perf_event__handler_t process,
|
|
|
|
struct perf_session *session);
|
|
|
|
int perf_event__process_tracing_data(union perf_event *event,
|
|
|
|
struct perf_session *session);
|
|
|
|
|
|
|
|
int perf_event__synthesize_build_id(struct dso *pos, u16 misc,
|
|
|
|
perf_event__handler_t process,
|
|
|
|
struct machine *machine,
|
|
|
|
struct perf_session *session);
|
|
|
|
int perf_event__process_build_id(union perf_event *event,
|
|
|
|
struct perf_session *session);
|
2009-09-24 23:02:18 +07:00
|
|
|
#endif /* __PERF_HEADER_H */
|